Digital PDFs
Documents
Guest
Register
Log In
EK-MXVB2-IN-001
May 2000
2 pages
Original
1.7MB
view
download
OCR Version
0.9MB
view
download
Document:
Installing the MXV11-B2 ROM Set on the MXV11-B Multifunction Module
Order Number:
EK-MXVB2-IN
Revision:
001
Pages:
2
Original Filename:
OCR Text
| B30 ,‘ 520 B 450 9 4807 m O—| PROM SIZE | ey 'BKBY 8 W10 } ROM SELECT | / JUMPER ~ p 0 J21 120 1o | ¢oex 6T 1 ws} ROM ~—_ MODE SELECT PROM J Low — SOCKETS | gvyTE @fi?fifi& OF LTC twIONAL) s J26 J27 J28 Connect the jumpers as shown in the figure to install the M Install the MXV11-B2 ROM chips in PROM sockets XEI? and X.EZS Insert the la% hyts (P/N 23-145E4-00) into XE28 (low-byte socket). Insert the high-byte ROM (P/N 23-146 XE19 (high-byte socket). Positionthe ROMs so thatpin 1 is in the upper»lefi corner of the 'CAUTION: Do not force the ROMs into the sockets. They fit snugly and must be guided into place gently. For additional information, refer to the MXV11-B2 ROM Set User Guxée (EIG MXV11-B Multifunction Module User Guide (EK-MXV1B-UG), or the MXV11-1 Module Configuration Guide (EK-MXV1B-CG). * o8 ws 3 16 - EK-MXVB2-IN-00 INSTALLING THE MXV11-B2 ROM SET ON THE MRV11-D UNIVERSAL PROM MODULE -5 . ENABLE ~O6 W“S JUMPER ou BOOTSTRAP{ J5 O [ DEVICE rPéWER/ SIZE JUMPERS 1 JUMPERS XE47 XE44 XE46 XE45 XE40 XE42 XE41 | XE43 FOR - " REVC ETCH # flf@ jwiz 340 J13 Qa2 < W?g 411 —0J10 Lo £ J380O ::&35& E1 4 E8 READ TIMING —1" (E O J18 J19 J20 W7 FROM J11 TO J12. THE ETCH REVISION IS FOUND * FOR REV D ETCH CONNECT ON THE LEFT SIDE OF THE BOARD COMPONENT SIDE UP, HANDLES FACING AWAY. Connect the jumpers as shown in the figure to mstall the MXV11-B2 ROM Set. ROM (P/N 23-145E4-00) into the Install the MXV11-B2 ROM chips in chip set 7. Insert the low-byte E4-00) into the HIBYTE 7 socket. Position LO BYTE 7 socket. Insert the high-byte ROM (P/N 23-146 | the ROMs so that pin 1 is in the upper-left corner of the socket. CAUTiON: Do not force the ROMs (inté -the sockets. They fit snugly and must be guided into place gently. D . - NOTE: The MXV11-B2 Boot ROMs are8KX 8 for these devices. the rules w . devices and must follo 2716 (2K X8) ROMs, Boot the using when is, That devices may not be used | on the array. P (EK-MXVE2-UG), the -B2 ROM Set User Guidethe For additional information, refer to the MXV11 MRV11-D Universal or ), D-UG Guide (EK-MRV1 MRV11-D Universal PROM Module User PROM Module Configuration Guide (EK-MRV1D-CG). * SR
Home
Privacy and Data
Site structure and layout ©2025 Majenko Technologies