Digital PDFs

EK-DSCPU-IN-A01

2000

2 pages

Original

0.6MB

Document:	KN31x CPU Installation Card
Order Number:	EK-DSCPU-IN
Revision:	A01
Pages:	2
Original Filename:

OCR Text

EK–DSCPU–IN. A01

Locate the CPU Slot.
Always place the first CPU in slot 0; use slot 1 when
you are adding a second CPU.

Figure 1 Opening the Cabinet

KN31x CPU INSTALLATION CARD
Use this card as a quick reference to install a KN31x
CPU module in AlphaServer DS20E / AlphaStation
DS20E systems.

Figure 2 CPU Slot Locations on System
Board
2

DIMM Slots

WARNING: CPU modules and memory modules
have parts that operate at high temperatures. Wait 2
minutes after power is removed before touching any
module.

CPU 0

CAUTION: Wear an antistatic wrist strap when
working on this system.
CAT0034A

Overview
• Open the cabinet.

•

Locate the CPU slot.

•

Install the CPU module.

•

Verify the installation.

Open the Cabinet.
1. Shut down the operating system and power down
the system.
2.

Unplug the power cord(s).

Remove the cover to gain access to the system
card cage. See Figure 1.
a.

Open the front bezel.

Loosen the captive screw ➊ attaching the
side panel to the chassis.

Remove the panel with a rearward motion
➋.

1
3
1
3
0
2
0
2

DIMM Slots

CPU 1

2
0
2
0
3
1
3
1

CAT0030B

Install the CPU Module.
1. Remove the processor from its shipping
container.
2.

Verify the Installation.
• Issue the show CPU command to display the
status of the CPU modules.

Slide the CPU module into the CPU slot. Be
sure the edges of the module are in both guides
so that it correctly lines up with the slot on the
system board.

Firmly press the module into the connector.

Part numbers for options can be found on the
Internet. Using a Web browser, follow links to the
appropriate AlphaServer DS20E / AlphaStation
DS20E supported options list from the URL:

Secure the module to the card cage frame with
the two screws on the handle.

http://www.digital.com/info/alphaserver/products.ht
ml

Plug the dc power harness into the CPU.

Replace the cover and the bezel.

Plug the ac power cord(s) in.

Figure 3 CPU Installation

CAT0040A