Digital PDFs

EK-A0716-IN-B01

June 1994

18 pages

Original

0.3MB

Document:	MicroVAX 3100 85/95 Installation Information
Order Number:	EK-A0716-IN
Revision:	B01
Pages:	18
Original Filename:

OCR Text

MicroVAX 3100
Model 85/95
Installation Information
Order Number: EK–A0716–IN. B01

June 1994
This manual describes how to install and test the MicroVAX 3100
Model 85 and Model 95.

Revision Information:

Digital Equipment Corporation
Maynard, Massachusetts

This manual supersedes EK–A0716–IN. A01

June 1994
Digital Equipment Corporation makes no representations that the use of its products in the
manner described in this publication will not infringe on existing or future patent rights, nor do
the descriptions contained in this publication imply the granting of licenses to make, use, or sell
equipment or software in accordance with the description.
Possession, use, or copying of the software described in this publication is authorized only pursuant
to a valid written license from Digital or an authorized sublicensor.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
Operation of this equipment in a residential area may cause interference in which case the user
at his own expense will be required to take whatever measures may be required to correct the
interference.
Warning!
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
This warning only applies to the MicroVAX 3100 Model 85.
Achtung!
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb
dieses Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende
Gegenmaßnahmen verantwortlich ist.
Diese Warnung bezieht sich nur auf Geräte des Typs MicroVAX 3100 Modell 85.
Attention!
Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des
interférences radioélectriques, il appartiendra alors à l’utilisateur de prendre les mesures spécifiques
appropriées.
Cette mise en garde ne s’applique qu’au MicroVAX 3100 modèle 85.
© Digital Equipment Corporation 1994. All Rights Reserved.
The postpaid Reader’s Comments form at the end of this document requests your critical evaluation
to assist in preparing future documentation.
The following are trademarks of Digital Equipment Corporation: DEC, Digital, MicroVAX,
OpenVMS, ThinWire, VAX, VAX DOCUMENT, and the DIGITAL logo.
All other trademarks and registered trademarks are the property of their respective holders.
S2610

This document was prepared using VAX DOCUMENT Version 2.1.

Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 Installation Procedure
Step 1: Choosing a Suitable Location . . . . . . . . . . . . . . . . . . . . . .
Step 2: Unpacking the System and Identifying the Parts . . . . . . .
Step 3: Connecting the Console Terminal . . . . . . . . . . . . . . . . . . .
Step 4: Connecting the ThinWire Terminator . . . . . . . . . . . . . . . .
Step 5: Connecting the Standard Ethernet Loopback
Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step 6: Connecting the Power Cord . . . . . . . . . . . . . . . . . . . . . . . .
Step 7: Turning on the Console Terminal and System Unit . . . . . .
Step 8: Checking the Power-Up Test Results . . . . . . . . . . . . . . . . .
Step 9: Connecting the System to a Network . . . . . . . . . . . . . . . .
Step 10: Connecting External Options to the System . . . . . . . . . .
Step 11: Booting the Operating System . . . . . . . . . . . . . . . . . . . . .

1–1
1–2
1–3
1–4
1–5
1–6
1–7
1–8
1–10
1–10
1–10

Figures
1–1
1–2

Successful Power-Up Test Screen . . . . . . . . . . . . . . . . .
Unsuccessful Power-Up Test Screen with an Error
Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1–8
1–9

iii

Preface
This manual describes how to install and test the MicroVAX™ 3100 Model 85 and
Model 95. It also refers to information on connecting the system to a network,
connecting external options to the system, and booting the operating system.

Audience
This manual is intended for anyone who wants to install the MicroVAX 3100
Model 85/95. It is written for both experienced and inexperienced users.

Structure of This Manual
The procedure for installing the MicroVAX 3100 Model 85/95 is presented in only
one chapter. Each section in the chapter represents a major step in the procedure
and contains detailed instructions to follow.

Additional Information
See the MicroVAX 3100 Model 85/95 Operator Information manual for the list of
related documents.

Conventions
The following conventions are used in this manual:
Convention

Description

MONOSPACE type

Text displayed on the screen is shown in monospace type.

italic type

Italic type emphasizes important information and indicates the
complete titles of manuals.

Note

A note contains information that is of special importance to the
user.

1
Installation Procedure
This chapter shows you, step by step, how to install the MicroVAX 3100
Model 85/95.

Step 1: Choosing a Suitable Location
Follow these guidelines when you choose where to place the system unit:
•

Place the system unit where the room temperature is between 10°C and 40°C
(50°F and 104°F) and the humidity is between 10% and 90%.

•

Place the system unit at least 1 metre (3 feet) from heaters, photocopying
machines, or other operating equipment.

•

Place the system unit in a well-ventilated location.

•

Place the system unit on a work surface, which is raised above the floor.

•

Keep the air vents on either side of the system unit clear.

•

Do not place the system unit on its side.

•

Do not expose the system unit to direct sunlight or abrasive particles.
Note
A console terminal is required for this installation, but is not supplied
with the system. You can order one from your Digital™ sales
representative.

Installation Procedure 1–1

Step 2: Unpacking the System and Identifying the Parts
1. Unpack the system.
2. Make sure that you have all the parts listed on the packing slip. The
following loose-piece accessory kit is shipped with all basic systems. If you do
not have all the parts listed, contact your Digital Sales representative.

7
RE_EN06058A_91

System Unit
DEC423 Terminal Cable (BC16E-25)

One ThinWire™ Ethernet T-Connector (H8223) and Two Terminators (H8225)

Standard Ethernet Loopback Connector (12-22196-01)

RS232 to DEC423 Adapter (H8575-A)

Power Cord

Documentation and Software Licenses

1–2 Installation Procedure

Step 3: Connecting the Console Terminal
1. Connect one end of the terminal cable to modified modular jack (MMJ) port 3.
2. Connect the other end of the terminal cable to a DEC423 (MMJ)
communications port on the console terminal. If your terminal has only
RS232 ports, use the RS232 to DEC423 adapter (H8575-A) to provide an
MMJ port on the terminal.
3. If you want, remove the label covering MMJ ports 0 and 1.

OPAO

MLO-012030

Terminal Cable

Label

Installation Procedure 1–3

Step 4: Connecting the ThinWire Terminator
1. Assemble the T-connector and the two terminators to form a ThinWire
terminator.
2. Connect the ThinWire terminator to the system unit.

OPAO

MLO-012031

T-Connector

Terminator

1–4 Installation Procedure

Step 5: Connecting the Standard Ethernet Loopback
Connector
Connect the standard Ethernet loopback connector (12-22196-01) to the system
unit.

1
OPAO

3
2

MLO-012032

Standard Ethernet Loopback Connector (12-22196-01)

Installation Procedure 1–5

Step 6: Connecting the Power Cord
1. Ensure that the on/off switch is in the off (O) position.
2. Connect the power cord to the system unit.
3. Connect the other end of the power cord to an isolated, grounded circuit.

OPAO

1
MLO-012033

On/Off Switch

Power Cord

1–6 Installation Procedure

Step 7: Turning on the Console Terminal and System
Unit
1. Turn on the console terminal. Wait until it completes its power-up test. (See
the terminal documentation for more information.)
2. Check the terminal settings. See the MicroVAX 3100 Model 85/95 Operator
Information manual for the list of correct settings.
3. Turn on the system unit by setting the on/off switch to the on ( | ) position.

1
OPAO

3
2

MLO-012034

On/Off Switch

Installation Procedure 1–7

Step 8: Checking the Power-Up Test Results
The power-up test can take several minutes to complete, depending on the
number of installed options you have and on which default settings you use:
•

If the power-up test results on the screen are similar to the results in
Figure 1–1, the system has passed the power-up test. Go to step 9.

•

If the power-up test results on the screen are not similar to the results in
Figure 1–1, the system has not passed the power-up test. Go to substep 1.

Figure 1–1 Successful Power-Up Test Screen
KA55-A or KA51-A V2.3, VMB 2.14
Performing normal system tests.
74..73..72..71..70..69..68..67..66..65..64..63..62..61..60..59..
58..57..56..55..54..53..52..51..50..49..48..47..46..45..44..43..
42..41..40..39..38..37..36..35..34..33..32..31..30..29..28..27..
26..25..24..23..22..21..20..19..18..17..16..15..14..13..12..11..
10..09..08..07..06..05..04..03..
Tests completed.
>>>

Central Processing Unit (CPU) name, Firmware version number, and
Virtual Memory Boot (VMB) version number
Read-Only Memory (ROM) based diagnostics countdown

Status message

Console prompt
1. Write down the error messages and the error summaries. Figure 1–2
shows an example of an error message and an error summary.
2. Set the on/off switch to the off (O) position.
3. Make sure that all the connections you made in step 3, step 4, step 5, and
step 6 are correct.
4. Set the on/off switch to the on ( | ) position.
5. If an error report is still displayed, see the MicroVAX 3100 Model 85/95
Troubleshooting and Diagnostic Information manual.

1–8 Installation Procedure

Figure 1–2 Unsuccessful Power-Up Test Screen with an Error Report
KA55-A or KA51-A V2.3, VMB 2.14
Performing normal system tests.
74..73..72..71..70..69..68..67..66..65..64..63..62..61..60..59..
? Test_Subtest_31_05 Loop_Subtest=00 Err_Type=FF DE_Memory_Setup_CSRs.lis
Vec=0000 Prev_Errs=0000 P1=00000000 P2=01000000 P3=00000001 P4=00010000
P5=2101801C P6=00000007 P7=80000003 P8=0000CF4A P9=00000001 P10=2006B8D8
r0=00000002 r1=21018000 r2=00000008 r3=81000000 r4=00000001 r5=01000000
r6=2006EB77 r7=21018048 r8=00000000 r9=20140758 r10=00000000 r11=FFFFFFFF
dser=0000 cesr=00000000 intmsk=00 icsr=01 pcsts=FA00 pcadr=FFFFFFF8 pcctl=FC13
cctl=00000020 bcetsts=0360 bcedsts=0F00 cefsts=00019200 nests=00
mmcdsr=01FE6600 mesr=00000000

58..57..56..55..54..53..52..51..50..49..48..47..46..45..44..43..
42..41..40..39..38..37..36..35..34..33..32..31..30..29..28..27..
26..25..24..23..22..21..20..19..18..17..16..15..14..13..12..11..
10..09..08..07..06..05..04..03..
16 MB RAM, SIMM Set (0A,0B,0C,0D) present
Memory Set 0: 00000000 to 00FFFFFF, 16MB, 32768 good pages, 0 bad pages

Error: SIMM Set 1 (1E,1F,1G,1H)
SIMM_1E = 64MB
SIMM_1F = 64MB

SIMM_1G = 64MB

SIMM_1H = 00MB ??

Total of 16MB, 32768 good pages, 0 bad pages, 104 reserved pages

Normal operation not possible.
Error message
Error summary

Power-up test completion

Specific error information on the test that failed

Status message

Installation Procedure 1–9

Note
Step 9 and step 10 are optional. However, step 11 is mandatory.

Step 9: Connecting the System to a Network
If you want to connect the system to a network, see the MicroVAX 3100
Model 85/95 Operator Information manual.

Step 10: Connecting External Options to the System
If you want to connect external options to the system, see the MicroVAX 3100
Model 85/95 Operator Information manual.

Step 11: Booting the Operating System
The system is supplied with factory installed software (FIS) on the system disk.
Boot the operating system following the procedures in the OpenVMS™ Factory
Installed Software User Information.

1–10 Installation Procedure

Reader’s Comments

MicroVAX 3100
Model 85/95
Installation Information
EK–A0716–IN. B01

Your comments and suggestions help us improve the quality of our publications.
Thank you for your assistance.

I rate this manual’s:

Excellent

Good

Fair

Accuracy (product works as manual says)
Completeness (enough information)
Clarity (easy to understand)
Organization (structure of subject matter)
Figures (useful)
Examples (useful)
Index (ability to find topic)
Page layout (easy to find information)
I would like to see more/less
What I like best about this manual is
What I like least about this manual is

I found the following errors in this manual:
Page
Description

Additional comments or suggestions to improve this manual:

For software manuals, please indicate which version of the software you are using:

Name/Title

Dept.

Company

Date

Mailing Address
Phone

Poor

Do Not Tear – Fold Here and Tape
TM

BUSINESS REPLY MAIL
FIRST CLASS PERMIT NO. 33 MAYNARD MASS.
POSTAGE WILL BE PAID BY ADDRESSEE

DIGITAL EQUIPMENT CORPORATION
Information Design and Consulting
MRO1-2/J18 VW
200 FOREST STREET
MARLBORO, MA 01752-3011

Do Not Tear – Fold Here

No Postage
Necessary
If Mailed
in the
United States