Digital PDFs
Documents
Guest
Register
Log In
DEC-RK05-IPB-1
2000
26 pages
Original
4.4MB
view
download
OCR Version
4.5MB
view
download
Document:
RK05 Disk Drive Illustrated Parts Breakdown
Order Number:
DEC-RK05-IPB-1
Revision:
0
Pages:
26
Original Filename:
DEC-RK05-IPB-1.pdf
OCR Text
DEC-RKO0S-IPB-1 HOW TO USE THE IPB ECO Cut-ln — The notation at the top of this column indicates the GENERAL This IPB is compiled following the organization and nomenciature of the engineeringdrawing structure. tevel of the system (option), at which the IPB was initially column next to the part that is added or modified. A bracket ([} MAJOR ASSEMBLY LOCATOR preceding the item description is used to indicate the parts affected by The Major Assembly Locator (first illustration) is an index that provides a description and a figure reference for all illustrations used in this manual. ECO's. Vendor Code/Part No. — Indicates vendor parts that are not stocked by DEC. Refer to the Field Service Spares Catalog (vendor part number to DEC part number) for the vendor code cross-reference. INDENTED PARTS LIST This manual ECO prepared. Subsequent ECO level designations, that modify existing parts or add new parts to the device, are inserted in the ECO Cut-In identifies each assembly being broken down (figure Used On Code — Letters in this column correspond to the variation reference callout), and all parts of that assembly. Further breakdown of an assembly is shown by an asterisk {*) preceding the item callouts codes assigned in Figure 1. Parts with an Alpha notation(s) are used in the Description Column. The number of asterisks preceding an item is used to denote the subordination of that item with respect to the on all option variations. Major Assembly. A single asterisk preceding an item description indicates that the item is part of the major assembly being illustrated. Items that are subordinate to single asterisks items, are denoted by two asterisks (**) and immediately follow the related single asterisk item. Additional asterisks are used, Ref Fig No. — A cross reference between illustrations. For each Major Assembly, the number in this column denotes the figure of the next higher assembiy. For all subassemblies, the number in this column denotes the figure showing additional detailed breakdown. as required, to denote further subordination. This system of part identification, provides a means for the user to identify the next higher assembly item and make alternate selections for parts when the required replacementpart or assembly is not immediately available. SYMBOL USAGE Hardware Designators — Alpha designators for screws (S), washers (W), nuts (N), and retaining rings (R} are inserted after the item number callouts on the illustration when stacked item numbers are used. COLUMN CALLOUT DESCRIPTION Figure & [tem — Indicates the figure number and item number of each Attaching Hardware — The @ symbol is inserted before any part that is used as attaching hardware. Attaching hardware is denoted as those part. Descripfion — Lists the name of the part and pertinent specifications (when only in those option variations. A blank indicates that the partis used required). Asterisks preceding the description denote the parts that are not an integral part of the referenced assembly. (NFR) Not Field Repairable — The (NFR) symbol is inserted after subordination of the part to the nexthigher assembly. any assembly that is not to be field dismantled. DEC Part No. — Lists the DEC part ordering number. A blank in this Other Symbols — Any column indicates a DEC part number was not assigned at the time of accessories, etc., publication. description. will other symbols that are required for Kits, be explained and appear as part of the item REVISION HISTORY ECO LEVEL PRINFING PAGES AFFECTED DATE 1st Printing RKO5 00014-00031 2-5-73 N/A " H743 00000-00001 ” ” " 54-09484 00000-00001 ” " ” 54-09503 00005-00006 & ” " 54-09574 00000 " " " H604 00002-00003 " " Copyright © 1973, by Digital Equipment Corporation DEC reserves the right, without notice, to make substitutions and modifications in the specifications of products documented in this manual and further reserves the right to withdraw any of these products from the market without notice. . DEC is not responsible for errors which may appear in the technical description (including illustrations and photographs) of the products covered by this manual. None of the descriptions contained in this manual imply the granting of any license whatsoever to make, use or sell equipment constructed in accordance therewith. HEAD POSITION SERVO DECPACK MOTOR ) H743 POWER SUPPLY Fig. 5 DISK SPINDLE ASSY POWER AMP, BOARD Fig. 3 RELAY BOARD LINEAR POSITIONER ASSY ‘ , Fig. 4 Fig. \\«%‘ 2 WIRED ASSY Fig. 1 (She\e_f 1 of 4} Fig. 1 {Sheet 1 of 4} .\\ BLOWER AND MOTOR ASSY Fig. 1 (Sheet 1 of 4) CONTROL PANEL ASSY Fig. 1 (Sheet 3 of 4) W/R HEAD Fig. 1 (Sheet 4 of 4) RKO05-01 Major Assembly f.ocator, RK05 Disk Drive 1 1/2 IPB RKO5 119 (See Fig. 2) 130 120 PARTS LIST 133S 139 i1 W 141 142 S 143 N 144 % 127 117 118 —126 4 of 4) {See Sheet . 124 (See Fig. 4) 122~ 126 S 95 W 6 10 81 Figure 1. 1 93 : 95 W RK05-02 94 S 8 ‘é" é(/) (618~ ® W ~Nd g O~ (See Fig. 3} 123 RKO5 Disk Drive Assembly (Sheet 1 of 4) 3 IPB RKO5 O 2n Nz« )et g o) L T S 2w o8N4D%oA w=b FARTSE & o <= z © ~ e - oy o S, —S 106 ] IPB RKO 7 By g 5 o 3¢ . dlilgliltlall PARTS LIST RK05-04 Figure 1. RKO05 Disk Drive Assembly (Sheet 3 of 4) IPB RKO5 PARTS LIST 129 (“B” DOWN-UPPER HEAD) 128 (“B” UP-LOWER HEAD) RKO05-08 Figure 1. iPB RKOS5 et RKO05 Disk Drive Assembly (Sheet 4 of 4) 6 1 FIG ECO ITEM NO. DEC PART NO. DESCRIPTION 1- RKO500014 USED ON CODE CODE PART NO. FIG NO. RKO5 DISK DRIVE ASSEMBLY Code A — Used on Model RK05-AA, RKO0O5-AA A RK05-AB B Code C — Used on Model RK05-BA, RKO5-BA C (50 Hz, 115V) Code D - Used on Model RK05-BB, RKO05-BB D (60 Hz, 115V) Code B — Used on Model RK05-AB, (60 Hz, 230V) {50 Hz, 230V) 1 *Cover, Top 74-09249-00 2 *Cover, Bottom (Front) 74-09247-00 3 *Cover, Bottom (Rear) 74-09248-00 4 *Screw, Flush Hd 90-02183-00 5 *Washer, Retaining 90-09180-00 6 *Chassis, Housing 74-09238-00 7 *Slide, Chassis (23 inch) 12-09152-02 8 *Washer No. 10 Int. Tooth 90-06635-00 9 *Screw, Phl, Truss Hd. No. 10-32 X 3/8 SST 90-06073-03 *Bezel (Sand Casting) 74-09217-00 10 11 12 *Bezel (Die Casting) 12-11250-00 *Washer, No. 6 Int. Tooth 90-06633-00 *Screw, Phi, Hd. Pan No. 6-32 X 1/2 SST 90-06024-01 *Screw, Phl, Hd. Pan No. 6-32 X 1/2 Self Tapping 13 [*Panel, Front 90-09514-00 *Nut, Kep No. 6-32 90-08185-00 15 *Cap, Light (Red) 12-10798-02 16 *Cap, Light {(White) 12-10798-01 17 *Handle, Door 12-10667-00 18 *Bottom, Door 12-10668-00 19 *Side, Door R.H. 74-09135-01 74-09135-02 20 *Side, Door L.H. 21 *Panel, Door 74-09136-00 22 *Screw, Phl. Flat No. 6-32 X 3/8 Self Tapping 90-02099-00 23 *Cam 74-09169-00 24 *Pivot 74-09164-00 25 *Washer 74-09165-00 26 *Ring, Retaining 90-09097-00 27 *Switch 12-10839-00 28 *Washer, Lock No. 2 Int. Tooth 90-06631-00 29 *Screw, Phl. Hd. Pan No. 8-32 X 5/16 SST 90-06003-01 30 *Screw, Soc. Hd. Cap No. 6-32 X 3/8 SST 90-08043-08 31 *Washer, LLock No. 6 Ext. Tooth 90-07649-00 32 *Clamp, Cable 1/8 90-07079-00 33 *Screw, Phl. Hd. Pan No. 6-32 X 5/16 SST 90-06021-01 **Board, Etched Circuit 50-09697-00 35 [FconTrROL PANEL AssEMBLY 00031 " | 74-09207-00 | 00020 14 34 § 00031 54-09698-00 36 **Bracket, Connector 55-09829-00 37 **Screw, Phl. Pan Hd. No. 4-40 X 5/16 Lg. 90-06010-01 38 **Nut, Keps No. 4-40 90-06557-00 39 **Housing, Socket Mate—N—Lock 4 pin (J2) 12-08350-04 40 **Housing, Socket Mate—N—Lock 15 pin (J3) 12-09350-15 41 **Pin Socket Mate—N—Lock 12-09456-00 42 * *Bar, Switch Mounting 55-09830-00 43 **Washer, Lock Int. 90-06633-00 44 **Screw, Phl. Pan Hd. No. 6-32 X 5/16 Lg. 90-06021-01 45 **Switch, Rocker (82) 12-05941-00 46 **Switch, Rocker (S3) 12-05375-00 47 **Button, Switch 12-05317-07 48 **Lamp 12-08169-00 49 **Terminal, Solderless 90-07812-00 7 | 00019 {PB RKO5 FIG ECO CUT-IN & ITEM NO. DESCRIPTION DEC akos. PART NO. G0014 VENDOR | USED ON CODE 1- 50 **Nut, Clip No. 6-32 90-08423-00 51 **Evyelet, Feed Through 90-06731-00 52 *HARNESS ASSEMBLY (CONTROL PANEL) 70-08705-00 53 *HARNESS ASSEMBLY (CONTROL PANEL 70-08819-00 TO SWITCHES) 54 *Bumper, Screw 12-10801-00 55 *Spring, Extension (Door) 90-09093-00 56 *Solencid, Rotary 12-10806-00 57 *Arm, Solenoid 74-09140-00 58 *Washer, Lock No. 5 Split Ring 59 *Screw, Phl. Pan. Hd. No. 5-40 X 90-06691-00 60 *Lock, Door 12-10815-00 61 *Spring, Extension {Door Lock) 90-09084-00 62 *Clamp, Door Lock 74-09546-00 63 *Washer, No. 4 Split Ring 90-06688-00 64 *Screw, Soc. Hd. Cap No. 4-40 X 65 *Base Plate 66 *Shock-Mount 12-10843-00 67 *Nut, Kep 5/16-18 90-06568-00 68 *Airduct 12-10681-00 1/4 SST 5/16 SST 90-09096-01 90-08936-08 74-09311-00 ] 12-1068100001 69 *(Gasket, Airduct 74-09254-00 70 *Screw, Phi, Hd. Pan No. 8-32 X 5/16 SST 90-06036-01 71 *Washer, No. 8 int. Tooth 90-06634-00 72 *Opener, Cartridge Door 12-10680-00 73 *Ring, Retaining 90-09098-00 74 *Spring, Torsion (Cartridge Door Opener) 12-10844-00 75 *Bracket, Cartridge Door 74-09233-00 76 *Receiver, Cartridge 12-10679-00 77 *Post, Pivot 12-10804-00 78 *Nut, Hex 5/16-18 90-09213-00 79 *Washer, .343 ID X .687 OD X .062 Thk. 90-06679-00 80 *Spring, Extension (Cartridge Receiver) 90-09092-00 81 *Post, Cartridge Support 74-09134-00 82 *Washer, .200 1D X .625 OD X .032 Thk, 90-06668-00 83 *Screw, Phl, Hd. Truss No. 10-32 X 5/8 SST 90-06074-00 84 *Transducer, Sector 30-10642-00 85 *Screw, Phl, Hd. Pan. No. 6-32 X 5/8 SST 90-06024-01 86 *Holder, Sector Transducer 74-09150-00 87 *Screw Soc. Hd, Cap No. 6-32 X 5/8 SST 90-06331-08 28 *Washer, Lock No. 68 Split Ring 20-07801-00 29 *Bracket, Switch 74-09258-00 40 *Strip Terminal (TB1, TB2) 12-10685-00 91 *Screw, Soc. Hd. Cap No. 4-40 X 1/2 SST 90-08041-08 92 *Strip, Terminal (TB4) 90-06905-00 93 *DISK SPINDLE ASSEMBLY (NFR) 12-10616-00 {Brush assy. item 94 Supplied with Spindle) 94 *Screw, Soc. Hd, Cap 1/4-20 X 3/4 SST 90-06372-08 {For Attaching Disk Spindle to Base) 95 *Washer, Lock 1/4 Split Ring 90-07797-00 {For Attaching Disk Spindle to Base) 936 *Brush Assembly 97 *Motor, Induction 50/60 Hz 12-10985-00 12-10808-00 98 *Plate, Motor Mounting 74-09143-00 a9 *Washer, Lock No. 8 Split Ring 100 *Screw, Soc. Hd. Cap No. 832 X 90-06690-00 1/2 8ST 90-06338-08 Hd. Cap No. 832 X 3/4 8ST 90-06042-01 {(For Attaching Motor to Plate) 101 *Screw, Soc. {For sitaching Plate 1o Base) IPE Bl05 *Pulley, Maotor 60 Hz T4-09418-01 ol 1972 AB REF FIG CODE PART NO. NO. FIG ECO ITEM NO. DESCRIPTION DEC acos. PART NO. 00014 | USED ON CODE FIG PART NO. NO, 1- 103 *Pulley, Motor 50 Hz 74-09418-02 104 *Belt, Woven 12-10812-00 Cc,D 105 *Bracket, Spring 74-09508-00 106 *Spring, Extension (Belt Tension) 90-09095-00 107 *Relay, Motor Starting 12-10800-00 108 *Screw, Phi. Hd. Pan. No. 6-32 X 1/4 SST 90-06020-01 109 *Capacitor, BMFD. 370V (with Clamp) 10-09397-00 110 *Cover, Insulation (cap) 20-08164-00 111 * Receptacle, Threaded 1/4 Turn Fastener 90-09167-00 112 *Filter, Absolute 12-10803-00 113 *Cover, Plenum 74-09232-00 114 *Fastener, 1/4 Turn 90-08343-00 115 *Washer, Wear 90-09146-00 116 * Retainer, Split Ring 90-08200-00 117 *POWER SUPPLY ASSEMBLY H743-AA A.C 5 H743-AB B.D 5 H743, 115V 60 Hz 118 *POWER SUPPLY ASSEMBLY H743, 230V 60 Hz 119 *LINEAR, POSITIONER ASSEMBLY 70-08702-00 120 *WIRED ASSEMBLY 70-08696-00 121 122 **Capacitor, 1000 MMF 1000V 20% 10-00043-00 *Bushing, Motor Mount 74-09256-00 *DECPACK MOTOR RELAY 54-09574-00 2 00026 4 BOARD ASSEMBLY 123 *HEAD POSITION SERVO POWER H-604-00 AMPLIFIER BOARD ASSEMBLY 124 *BLOWER AND MOTOR ASSEMBLY 12-10807-00 125 *Screw, Soc. Hd. Cap 1/4-20 X 20-06370-08 126 *Inlet Ring, Blower 12-11167-00 127 *Seal, Inlet Ring 74-10547-00 128 *Head, W/R "B’ Up {Lower Head) 30-10863-01 129 *Head, W/R "B’ Down {Upper Head) 30-10863-02 130 *Harness, Logic 70-08703-00 131 *Grommet 1/16 90-07035-00 1/2 SST 132 *Bracket, Spring (Cartridge Receiver) 74-10622-00 133 *Screw, Ph. Hd. Pan 6-32 X 3/4 8ST 90-06026-01 134 *Cover, Pre-Filter 74-10512-00 135 *Pad, Filter 74-09253-00 136 *Screw, Captive 90-08372-01 137 *10'" Ring 1/8 X 1/4 50-07835-00 138 *Washer, No. 6 Nylon .156 X .312 X .032 90-06707-00 139 *Harness, (Power Supply to Control Panel) 70-08706-00 140 *Clamp, Cable Plate 74-10515-00 141 *Shield, Shock (Relay Board) 74-09469-00 142 *Screw, Phl, Pan Hd. No. 4-40 X 3/8 90-06011-01 143 *Nut, Kep No. 4-40 90-06557-00 144 *Spacer, 3/16 AF X 145 *Ground Strap 90-06980-00 146 1t Cable, Unibus (NFR) BC11A-06 1/8 Lg. X No. 4 Hole H604- 3 00002 90-06791-00 (PDP-11 Accessory Cable) 147 tCable, Control (NFR) 70-0402€6-00 {PDP-8E Accessory Cable) 148 TDisk Cartridge {12 Slot Hub) 30-10350-00 149 TDisk Cartridge (15 Slot Hub) 30-10350-02 ACCESSORY LIST tHead Cleaning Kit 22-00007-00 TShipping Bracket {L.H) 74-09691-01 1tShipping Bracket {RH) 74 09691-02 910 B RO PARTS LIST 63 RKO05-05 Figure 2. 1 Linear Positioner Assembly 11 iIPB RKO5 FIG ECO & CUT-IN ITEM NO. DESCRIPTION 2- VENDOR DEC RK05- USED ON PART NO. 00014 CODE LINEAR POSITIONER ASSEMBLY 70-08702-00 1 @Washer, Lock, 1/4 Split Ring 90-07797-00 2 @Screw, Soc. Hd. Cap. 1/4-20 x 7/8 90-06371-08 3 *MAGNET HOUSING ASSEMBLY (NFR) 74-10708-00 4 *Screw, Bumper 12-10801-00 5 *Pin, Dowel 1/8 Dia. x 1/2 Lg. 90-08106-00 5] *CARRIAGE AND COIL ASSEMBLY (NFR) 74-10707-00 7 *Shaft, Bearing 74-09142-00 8 *BEARING ASSEMBLY (ALL (4) BEARINGS 74-09386-00 REF FIG CODE PART NO. NO., 1 MUST BE REPLACED AT THE SAME TIME) 9 *Bushing, Bearing Holder 74-05239-00 10 *Nut, Hex No. 6-32 S.5. 90-08957-00 70-08707-00 11 *FLEX STRIP CABLE ASSEMBLY 12 **Strip, Flex 17-00017-00 13 **Support, Flex Strip 50-09940-02 14 **Clamp, Flex Strip 74-09404-00 15 **Support, Flex Strip 74-09366-00 16 **Support, Flex Strip 50-09940-01 17 **Wire, 18 AWG Bik/Red TWP 91-07330-02 12-08351-03 18 **Connector, Mate—-N-—Lock, 3 pin 19 **Contact, Pin {(Male) 12-09378-01 20 **Washer, Lock, No. 2 int. Tooth 90-06631-00 21 **GSerew, No, 2-56 x 1/4, Phl. Pan. Hd. 290-06001-01 22 *Clamp, Cable, Nylon 1/8 Dia. 90-07079-00 23 *Washer, Lock No. 8 Split Ring 90-06690-00 24 *Screw, Phl, Pan Hd. No. 8-32 x 1/4 ST 90-06035-01 25 *LINEAR TRANSDUCER ASSEMBLY 30-10638-00 26 **Block, Transducer 30-10638-01 27 **Scale, Transducer Glass 30-10638-02 28 *Washer, L.ock No. 4, Split Ring 90-06688-00 29 *Screw, Soc. Hd. Cap No. 4-40 x 1/2 SST 90-08042-03 30 *Screw, Self-Locking Soc. Hd. Set 12-10811-00 31 *Screw, Self-Locking Soc. Hd. Set 12-11027-00 32 *Washer, No. 6 Int. Tooth 90-06633-00 33 *Screw, Soc. Hd. Cap No. 6-32 x 3/8SST 90-08045-08 34 *Slide 74-09208-00 35 *Washer, Lock No. 10 Split Ring 90-07906-00 20-06349-08 36 *Screw, Soc. Hd. Cap No. 10-32 x 7/8 SST 37 *Bracket, Switch 74-09304-00 38 *Washer, No. 2 int. Tooth 90-06631-00 39 *Washer, No. 4 Flat 40 *Screw, Phl. Pan Hd. 90-08172-00 No. 2-56 x 1/4 SST 90-06001-01 41 *Switch 42 * L.ever, Switch Actuator 12-10838-01 12-10838-02 43 *Washer, Int. Tooth 90-06631-00 90-06005-01 a4 *Screw, Slotted Rd. Hd. 45 *Scale 50-09941-00 46 *Spacer, 3/8 Lg. 90-06844-00 47 *Spacer, 3/4 Lg. 90-06859-00 48 *Screw, Soc. Set No. 6-32 x 3/8 Lg. 90-06293-10 49 *Washer, Na. 6 Int. Tooth 20-06633-00 50 *Washer, Flat 90-06653-00 51 *Screw, Phi. Pan Hd. No. 6-32 x 5/16 SST 52 *Cilamp, Cable 90-06021-01 . 890-07080-00 53 *Washer, Nio. 6 Int. Tooth 80-06633-00 54 *Screw, Phl. Pan Hd. No. 6-32 x 5/16 SST 90-06021-01 55 *Strap, Carriage Shipping 74-09368-00 56 *Washer, Lock No. 10 Split Ring SST 90-07906-00 57 *Screw, Soc. Hd. Cap No. 10-32 x 3/8 SST 80-06345-08 58 *Clamp, Cable 74-09326-00 59 *Washer, No. 2 Int. Tooth 90-06631-00 *Screw, Phl. Pan Hd. No. 2-56 x 1/4 SST 90-06001-00 60 61 E‘DUCK BILL 12-10744-00 12-1074400001 62 *Washer, Lock No. 8 Split Ring 90-06690-00 63 *Screw, Soc. Hd. Cap No. 8-32 x 3/4 SST 80-06340-08 i iPB RKO5 12 1 FIG ECO ITEM NO. ", 3- DESCRIPTION HEAD POSITION SERVO POWER DEC weoa PART NO. 00002 | USED ON CODE FIG CODE PART NO, NO. H604-00 1 AMPLIFIER ASSEMBLY 1 *Transistor (Q3) 2N3791 2 *Transistor (Q4) 2N3715 15-03068-00 3 *Resistor (R3, R14) 22 Ohms 1/4W 10% 13-00188-00 4 *Resistor (R13) .1 Ohms 10W 1% 13-09108-00 5 *Resistor (R11) 200 Ohms 1W 5% 13-02382-00 6 *Resistor (R12) 10 Ohms .BW 5% 13-00168-00 7 *Resistor (R4} 1K Ohms 1/4W 5% 13-00365-00 8 *Resistor (R2) 2K Ohms 1/4W 5% 13-02388-00 9 10 15-09581-00 *Resistor (R1) 470 Ohms 1/4W 5% (obsolete) 13-00316-00 *Resistor (R1) 1K Ohms 1/4W 5% 13-00365-00 00003 *Thermistor (R16) 1K 10% (obsolete) 13-10071-00 00003 (Replaced with Jumper) 11 *Capacitor (C3, C4) 15 UF 20V 10% 10-04812-00 12 *Potentiometer (R15) 2K 1/2W 10% 13-09410-00 13 *Capacitor (C5) .1 UF 100V 10% 10-02342-00 14 *Capacitor (C1, C2) .01 UF 100V 20% 10-01610-00 15 *Capacitor (C6) 33 PF 100V 5% 10-00009-00 16 *IC (E1) Dec 301 19-10282-00 17 *Switch, Toggle (S1) T-8001 12-10209-00 18 *Resistor (R9, R10) 100 Ohms .25W 10% 13-00231-00 19 *Resistor (R5) 220 Ohms .25W 10% 13-00275-00 20 *Resistor (R7, R8) 3 Ohms .5W 5% 13-01643-00 21 *Resistor (R6) 1.2K Ohms .25W 10% 13-00366-00 22 *Transistor {Q1) D44C8 or TIP 31A 15-10421-00 23 *Transistor (Q2) D45C6 15-10414-00 24 *Housing, Socket, 6 pin (Mate-N-LLock) 12-09350-06 25 *Pin, Housing {Mate-N-Lock) 12-09456-00 CAUTION: REFER TO CIRCUIT SCHEMATIC FOR LATEST REVISION LEVELS OF ELECTEBCAL (;:OMPONENTS 24 25 9 10 1 14 i6 3 17 18 19 20 21 18 20 22 23 sl & e 4 & RKO05-06 Figure 3. Head Position Servo Power Amplifier Assembly 13/14 IPB RKO5 FIG ECO ITEM NO. DESCRIPTION 4- DEC 54-09574- USED ON PART NO. 00000 CODE FIG CODE PART NO. NO., DECPACK MOTOR RELAY BOARD ASSEMBLY 54-09574-00 1 *Relay (K1, K2) 3 Pole, 12V 10A 1 12-10683-00 2 *Diode (D4, D5) D003 11-00100-00 3 *Arc Suppressor (Thyractor) (D2, D3) 11-00106-00 6RS20SP4B4 4 *Resistor (R1, R2) 27 Ohms 1W 5% 13-01516-00 5 *Diode, (D1) D672 11-05275-00 6 *Resistor (R3) 13-00365-00 7 *Housing, Socket (Mate—N—L.ock) 15 pin 8 *Pin Housing (Mate—N—Lock) 12-09456-00 9 @Shield, Shock 74-09469-00 10 @Screw, Phl. Pan Hd. No. 4-40 x 3/8 90-06011-01 11 ©Nut, Kep No. 4-40 90-06557-00 12 @Spacer, 3/16 AF x 1/8 LLg. x No. 4 Hole 90-06791-00 1K Ohms 1/4W 5% 12-09350-15 CAUTION: REFER TO CIRCUIT SCHEMATIC FOR LATEST REVISION LEVELS OF ELECTRICAL COMPONENTS S 10 11N ~BREZOSPARE RK05-07 Figure 4. 1 DecPack Motor Relay Board Assembly 15/16 IPB RKOS5 S, L PARTS LIST 35 33 34 31 44 45 28S 14W 30 48 30 46 47 3N 45 32 27S 36w 28S 26N 37 25 46 47 27S 278 16 5 3N 18 4s 19 g 17~ 16 2iW 2258 20 23 12 13 12 15S 158 158 14W 14W 14W w 7N 10W 11S 8s RK05-09 Figure 5. H743 Power Supply Assembly 17 IPB-RKO5 FIG ECO & CUT-IN ITEM NO. DESCRIPTION 5— H743 POWER SUPPLY ASSEMBLY DEC n743. PART NO. 00000 VENDOR | USED ON CODE H743-AA A H743-BB B CODE PART NO. REF FIG NO. 115V 60 Hz H743 POWER SUPPLY ASSEMBLY 230V 60 Hz ®@Washer, No. 8 Int. Tooth 90-06634-00 @Screw, Phl. Hd. Pan No. 8-32 x 5/16 SST 90-06036-01 53-09790-00 1 *Bracket, Power Supply 2 *Transformer 16-10511-00 3 *Nut, Kep No. 6-32 90-06560-00 4 *Screw, Phl. Flat Hd. No. 6-32 x 5/16 SST 90-06021-02 5 *Bracket, Rectifier 53-09772-00 6 *Washer, No. 6 Int. Tooth 90-06633-00 7 *Nut, Tinnerman No. 6-32 90-07963-00 8 *Screw, Phl. Pan Hd. No. 6-32 x 5/16 SST 90-06021-01 9 * Rectifier 11-10051-00 10 *Washer, No. 6 Int. Tooth 90-06633-00 11 *Screw, Phl. Pan Hd. No. 6-32 x 1/2 SST 90-06024-01 12 *REGULATOR ASSEMBLY 8 to 20V 54-09484-00 6 13 *REGULATOR ASSEMBLY +5V 54-09503-00 7 14 *Washer, No. 6 Int. Tooth 90-06633-00 15 *Screw, Phl. Pan Hd. No. 6-32 x 5/16 SST 20-06021-01 16 *Capacitor, 6000 MFD, 50V 10-10510-00 17 *Bracket, Capacitor 12-09242-00 18 *Nut, Tinnerman No. 6-32 90-06584-00 90-06021-02 19 *Screw, Phi, Flat Hd. No, 6-32 x 5/16 SST 20 *Tab, Faston 90-07776-00 21 *Washer, No. 10 Int. Tooth 90-06635-00 22 *Screw, Phl. Pan Hd. No. 10-32 x 1/4 SST 90-08007-01 23 *Terminal 90-07193-00 24 *Capacitor, 6000 MF 10V 10-10704-00 | 00001 25 *Bracket, Capacitor 12-10428-00 26 *Nut, Kep No. 6-32 90-06560-00 | 00001 27 *Screw, Phl. Pan Hd. No. 6-32 x 5/16 SST 90-06021-01 00001 28 *Screw, Phl. Pan Hd. No. 6-32 x 1/2 SST 90-06024-01 00001 29 *Clamp, Cable (Nylon) 90-07083-00 30 *Breaker, Circuit, BA 12-05293-00 31 *Strip, Terminal 90-06906-00 32 *Connector, Solderless 90-07919-00 33 *Connector, Solderless 90-07917-00 34 *Tubing, Heat Shrinkable 1/4 OD White 91-07253-00 35 *Tab, Amp 250 90-08219-00 36 *Washer, No. 6 Ext. Tooth 90-07649-00 37 *Filter, Line 10-10585-00 38 *Battery, 4 Cell 12-10641-00 39 *Tubing, Heat Shrinkable White 91-07253-09 40 *Grommet, Caterpilier 3/32 90-07036-00 41 *Jumper, 115V 70-08729-01 A 42 *Jumper, 230V 70-08729-02 B 43 *Jumper 70-08729-03 44 *ndicator, Elapsed Time 12-10781-00 45 *Grommet, 1/8 1D 90-07014-00 46 *Cord, Power (115V) 17-00006-06 A a7 *Cord, Power (230V) 17-00005-06 B 48 *Strain Relief 3/8 Romex 90-08280-00 ‘ 49 *Harness, Power Supply 70-08704-00 IPB-RKO5 18 00001 1 PARTS LIST 35 38 31 33S 16 17 ig 10 19 17 20 21 22 18 24 44 28 42 i3 RKO05-11 Figure 6. Regulator Assembly (8-20V) 19 IPB-RKO5 FIG ECO & ITEM DEC NO. 6— DESCRIPTION PART NO. | ooooo REGULATOR ASSEMBLY 8 to 20V 54-09484-00 1 *Capacitor (C6) .1000 MFD 100V 10% 10-02342-00 2 *Fuse (F1), 5 AMP 12-09070-00 3 *Capacitor (C3, C5, C8) .0100 MFD 100V 20% 10-01610-00 4 *Diode (D2) D664 11-00114-00 5 *Connector (J1) 8 Pin (Mate—N—Lock) 12-09340-01 6 * Resistor, (R22, R23) 1K Ohms 1/8W 1% 13-03114-00 7 *Transistor (Q3) DEC 0045 C 15-10414-00 8 *Resistor, (R21) 270 Ohms 1/4W, 5% 13-01972-00 ] *Resistor, (R19) 750 Ohms 1W 5% 13-02385-00 10 *Transistor, (Q1—Q2) DEC 6534 C 11 * Resistor, Variable (R17) 10K Ohms 3/4W 10% 12 *Resistor, (R10, R12, R16) 1.210K Ohms CUT-IN 54-00484. | USED ON CODE VENDOR CODE PART NO. REF FIG NO. 5 15-03409-02 | 13-09143-10 13-02871-00 1/8W 1% 13 *Resistor, (R11, R15, R20) 1.000K Ohms 13-00365-00 1/4W 5% 14 * Capacitor, (C4) 930 MFD 30V -10 +75% 15 *Resistor {(R18) 4.7K Ohms 1/4W 5% 13-00447-00 16 *Capacitor (C2) 17. MMF 100V 5% 10-01739-00 17 *Regulator, IC (E1, E2) DIP 723C 19-10415-00 18 *Resistor, (R7, R14) 56 Ohms 1/4W 5% 13-02602-00 19 *Resistor (R13) 2.7M, 1/4W 5% 13-09680-00 20 *Capacitor (C1) 100. MMF 100V 5% 10-00016-00 21 * Resistor (R8) 3.480K Ohms, 1/8W 1% 13-05114-00 22 * Resistor (R4, R5, RY9) 17.4K Ohms 1/8W 1% 13-09417-00 23 *Resistor Variable (R2) 13-09150-03 24 * Resistor (R1) 2.61K Ohms 1/8W 1% 13-03303-00 25 * Resistor (R3) 10K Ohms 1/8W 1% 13-03312-00 26 *Capacitor (C7} 1.0 MMF 35V 10% 10-01776-00 27 *Diode Zener, (D1) TINO748A 3.0V 11-00122-00 28 *Resistor (R25) 100 Ohms 1/4W 5% 13-00229-00 29 *Resistor (R24) 0.5 Ohms 5BW 3% 13-10508-00 30 *Capacitor (C9) 1.0 MFD 100V 10-05507-00 31 *Transistor (Q4) 2N4398 15-05870-00 32 *1nsulator, Thermal 90-08419-00 33 *Screw, Phi. Pan Hd. No. 6-32 x 1/2 90-06024-01 34 *Washer Int. Tooth No. 6 90-06633-00 35 *Choke 120 UH 16-10573-00 36 *Screw, Phi. Truss Hd. No. 10-32 x 1 90-06077-03 37 *Washer, Int. Tooth Lock No. 10 90-06635-00 38 *Heat Sink 53-09543-00 39 *Diode (D3) 1TN3889 11-10491-00 40 *Bushing, Diode 90-08441-00 1K 1/2W 10-10509-00 41 *Insulator, Thermal 90-08424-00 42 *Lug, Solder 90-08150-00 43 *Nut, Hex No. 10-32 90-06584-00 44 *Socket, Transistor 12-10130-00 a5 *Screw, Bind., Hd. No. 2-56 x 3/16 90-06000-04 46 *Cable, 20 Connector 91-07575-00 CAUTION: REFER TO CIRCUIT SCHEMATIC FOR LATEST REVISION LEVELS OF ELECTRICAL COMPONENTS IPB-RKO05 20 S 1 PARTS LIST 29w 15 i6 17 14 19 20 7 21 6 49 22 17 23 38 40 38 32 34 28 37 S 36 W 31 30S 27 41 32 42N 356 34 14 i3 18 12 Figure 7. Regulator Assembly (+5V] 1 21 1PB-RKO5 FIG ECO CUT-IN & ITEM DEC NO. 7~ DESCRIPTION PART NO. REGULATOR ASSEMBLY +5V 54-09503-00 1 *Resistor (R19) 1K Ohms 1/8W 1% 13-03114-00 2 * Resistor (R13) 13-09143-07 3 *Fuse (F1) 4 *Resistor (R1, R2, R12) 1K Ohms 1/4W 5% 5 *Connector (J1) 8 Pin 6 *Transistor (Q1) D4506 7 *Capacitor (C1, C5, C10) .01 MFD 100V 20% 8 *Resistor (R5) 270 Ohms 1/4W 5% 13-01972-00 9 * Resistor (R6) 2.61K Ohms 1/8W 1% 13-03303-00 10 *Resistor (R10) 4.7K Ohms 1/2W 5% 13-00445-00 11 * Resistor (R18) 330 Ohms 1/4W 5% 13-00295-00 12 *Capacitor (C3) 930 MFD 30V -10 +75% 10-10509-00 13 * Resistor (R20) 2.74K Ohms 1/8W 1% 13-04868-00 14 *Resistor (R9, R15) 3.83K Ohms 1/8W 1% 13-09413-00 15 * Resistor (R14) 56 Ohms 1/4W 5% 13-02602-00 16 *Capacitor (C2) 100 PV 100V 5% 10-00016-00 1K Ohms 3/4W 10% 5 Amps VENDOR 54-00503- | USED ON 00005 FIG CODE CODE PART NO. 13-00365-00 12-09340-01 15-10414-00 10-01610-00 17 * Regulator IC (E1, E2) 723C D.I.P. 19-10415-00 18 *Transistor (Q2, Q3) DEC 6534 D 15-03409-00 13-09150-03 19 *Resistor (R7) 1K Ohms 1/2W 20% 20 *Capacitor (C7) 1000 PF 100V 5% 10-00042-00 21 * Resistor {R8) 2.7M Ohms 1/4W 5% 13-09680-00 22 *Resistor (R11) 27 Ohms 1/4W 5% 13-01522-00 23 *Capacitor (C6) 68 PF Ohms 100V 5% 10-00014-00 24 *Capacitor (C8) .02 UF 100V -0 +20% 10-00004-00 25 *Capacitor (C9) 330 MFD 10V 10-09808-00 26 *Resistor (R16) 1.5K Ohms 1/4W 5% 13-00391-00 27 *Transistor (Q5) 2N4398 15-05870-00 28 *Insulator, Thermal 90-08419-00 29 *Washer, Int. Tooth No. 6 90-06633-00 30 *Screw, Phl, Pan Hd. No. 6-32 x 1/2 90-06024-01 31 *SCR (C30U) 11-09978-00 *Diode, (D3) IN4B53B 5.6V 11-11241-00 | 00006 32 *Diode (D2) 1N3889 11-10481-00 33 *Bushing 90-08441-00 34 *Insulator, Thermal 90-08424-00 35 *Choke (L1) 120 UH 16-106573-00 36 *Washer, Int. Tooth 90-06635-00 37 *Screw, Phi. Truss Hd. No. 10-32 x 1 90-06077-03 38 *Heat Sink 53-09543-00 39 *Socket, Transistor 12-10130-00 a0 * Resistor (R22) 13-00229-00 41 * Lug, Solder 42 *Nut, Hex No. 10-32 43 * Resistor (R21) 0.05 Ohms 5W 3% 13-10507-00 a4 *Washer, Int. Tooth No. 2 90-06631-00 45 *Screw, Binding Hd. No. 2-566 x 3/16 90-06000-04 46 *Lug, Solder 90-06764-00 a7 *Washer, Flat 1/4 90-06676-00 48 *Capacitor, (C11) 1. UF 100V 10% 10-05507-00 49 * Resistor, (R4) 4.7K Ohms 1/4W 5% 13-00447-00 50 *Cable, 20 Connector 81-07575-00 100 Ohms 1/4W 5% 90-08150-00 . 90-06564-00 CAUTION: REFER TO CIRCUIT SCHEMATIC FOR LATEST REVISION LEVELS OF ELECTRICAL COMPONENTS ] IPB-RKO5 ] 22 NO, 5 12-09070-00 4 REF E | | ILLUSTRATED PARTS BREAKDOWN COMMENT SHEET Any and all comments and suggestions for correcting errors and/or additional information to improve this manual will be reviewed and researched for possible use when this manual is revised and/or reprinted. Enter your comments and suggestions in the form provided below and return to Technical Documentation. MODEL FIGURE NO. ITEM NO. FIGURE NO. CHANGE FROM CHANGE FROM CHANGE TO CHANGE TO FIGURE NO. ITEM NO. FIGURE NO. CHANGE FROM CHANGE FROM CHANGE TO CHANGE TO FIGURE NO. ITEM NO. FIGURE NO. CHANGE FROM CHANGE FROM CHANGE TO CHANGE TO ADDITIONAL COMMENT(S) Name di PUBLICATION NO. Cost Center date: ITEM NO. ITEM NO. ITEM NO. FIRST CLASS PERMIT NO. 33 MAYNARD, MASS. BUSINESS REPLY MAIL NO POSTAGE STAMP NECESSARY IF MAILED IN THE UNITED STATES Postage will be paid by: Digital Equipment Corporation Technical Documentation Department 146 Main Street Maynard, Massachusetts 01754 £
Home
Privacy and Data
Site structure and layout ©2025 Majenko Technologies