Digital PDFs

DEC-PC04-IPB-1

2000

26 pages

Original

2.8MB

view download

OCR Version

2.9MB

view download

Document:	PC04 Paper Tape Reader/Punch Illustrated Parts Breakdown
Order Number:	DEC-PC04-IPB-1
Revision:	0
Pages:	26
Original Filename:	DEC-PC04-IPB-1.pdf

OCR Text

DEC-PC04-IPB-1

PAPER TAPE READER/PUNCH
. HOW TO USE THE IPB
ECO Cut-ln — The notation at the top of this column indicates the

" GENERAL

This IPB is compiled following the organization and nomenclature of

ECO level of the system (option), at which the IPB was initially
prepared. Subsequent ECO level designations, that modify existing

MAJOR ASSEMBLY LOCATOR

preceding the item description is used to indicate the parts affected by

the.engineering drawing structure.

The Major Assembly Locator (first illustration) is an index that
provides a description and a figure reference for all illustrations used in

parts or add new parts to the device, are inserted in the ECO Cut-In
column next to the part that is added or modified. A bracket (N
ECO’s.

Vendor Code/Part No. — indicates vendor parts that are not stocked

by DEC. Refer to the Field Service Spares Catalog (vendor part
number to DEC part number) for the vendor code cross-reference.

this manual.

INDENTED PARTS LIST

This manual identifies each assembly being broken down (figure
reference callout), and all parts of that assembly, Further breakdown

of an assembly is shown by an asterisk {*) preceding the item callouts
in the Description Column. The number of asterisks preceding an item
is used to denote the subordination of that item with respect to the
Major Assembly, A single asterisk preceding an item description

indicates that the item is part of the major assembly being illustrated.

Items that are subordinate to single asterisks items, are denoted by

two asterisks (**) and immediately follow the related single asterisk

item. Additional asterisks are used, as required, to denote further
subordination. This system of part identification, provides a means for
the user to identify the next higher assembly item and make alternate
selections for parts when the required replacement part or assembly is
not immediately available.

Used On Code — Letters in this column correspond o the variation

codes assigned in Figure 1. Parts with an Alpha notation(s) are used
only in those option variations. A blank indicates that the part is used
on all option variations.

Ref Fig No. — A cross reference between illustrations. For each Major
Assembly, the number in this column denotes the figure of the next
higher assembly. For all subassemblies, the number in this column
denotes the figure showing additional detailed breakdown.
SYMBOL USAGE

Hardware Designators — Alpha designators for screws (S), washers
(W), nuts (N), and retaining rings (R) are inserted after the item
number callouts on the illustration when stacked item numbers are
used.

COLUMN CALLOUT DESCRIPTION
Figure & ltem — Indicates the figure number and item number of each
part.

Description — Lists the name of the part and pertinentspecifications
{(when required). Asterisks preceding the description denote the
subordination of the part to the next higher assembly.

Attaching Hardware — The @ symbol is inserted before any part that
is used as attaching hardware. Attaching hardware is denoted as those
parts that are not an integral part of the referenced assembly.
(NFR) Not Field Repairable —~ The (NFR) symbol is inserted after

any assembly that is not to be field dismantled.

DEC Part No. — Lists the DEC part ordering number. A blank in this

Other Symbols— Any other symbols that are required for kits,
accessories, etc., will be explained and appear as part of the item

publication.

description.

column indicates a DEC part number was not assigned at the time of

REVISION HISTORY

PRINTING

ECO LEVEL

PAGES AFFECTED

DATE

1st Printing

| PC04-00000-00056

5/30/73

| N/A

1st Printing

| 5408310-00000-00005|

5/30/73

| N/A

1st Printing

| 5408935-00000-00001|

5/30/73

| N/A

1st Printing

| 5408385-00001-00001|

5/30/73

| N/A

1st Printing

| 7006520-00000-00000|

5/30/73

| N/A

modifications in the specifications of products documented in this
manual and further reserves the right to withdraw any of these

products from the market without notice.

DEC is not responsible for errors which may appear in the technical
description (including illustrations and photographs) of the products
covered by this manual.

None of the descriptions contained in this manual imply the
granting of any license whatsoever to make, use or sell equipment
constructed in accordance therewith.

SWITCH ASSEMBLY
Fig. b

PR SWITCH

BOARD ASSEMBLY
Fig. 6

READER ASSEMBLY

PAPER TAPE READER/PUNCH ASSEMBLY

Fig. 4

Fig. 1
POWER REGULATOR
Fig. 3

PUNCH ASSEMBLY
Fig. 7

SCR DRIVER ASSEMBLY
Fig. 8
TRIAC DRIVER ASSEMBLY
Fig. 9

CHASSIS and POWER SUPPLY ASSEMBLY
Fig. 2
PCO4-02

PCO4 Major Assembly Locator

1/2

1PB-PCO4

REFER TO
MODULE
UTILIZATION
DRAWING
D-MU-PC04-0-3

Figure 1.

Paper Tape Reader/Punch Assembly
IPB-PC0O4

CUTIN

ITEM

DEC

NO.
1—

DESCRIPTION

VENDOR

PCO4-

USED ON

PART NO. | ooooo

CODE

REF
FIG

CODE

PART NO.

NO,

MODEL PC04 PAPER TAPE

READER/PUNCH ASSEMBLY
Code A" used on PC04-B

PC04-B

PCO4-BA

(60 Hz, PT PU, RDR & PS)
Code "B’ used on PC04-BA

{50 Hz, PT PU, RDR & PS)
Code “C" used on PC04-BB

PC04-BB

00006

PC04-BC

00006

(PC04-B for PDPS8/I, 60 Hz)
Code "D’" used on PC04-BC

(PC04-BA for PDP8/I, 50 Hz)
Code ““E”’ used on PC04-BL

PC04-BL

PCO4-BM

PC04-C

PCO04-CA

(PC04-B for PDP8/L., 60 Hz)
Code “F’* used on PC04-BM

(PCO4-BA for PDP8/L, 50 Hz)
Code "G"” used on PC04-C

(60 Hz, PT PU, RDR, PS & SCR)
Code “H’* used on PC0O4-CA

(50 Hz, PT PU, RDR, PS & SCR)
Code "“J" used on PC04-CL

PCO4-CL

00053

PC04-CM

00053

(Pos Log, 60 Hz, PT PU, RDR, PS & SCR)
Code “"K'" used on PC04-CM

(Pos Log, 50 Hz, PT PU, RDR, RS & SCR)
Code "’L" used on PC04-P

PCO04-P

PC0O4-PA

PCO4-PL

PCO4-PM

PC04-R

(60 Hz, PT PU, & PS)
Code "M’ used on PCO4-PA

(50 Hz, PT PU, & PS)
Code "N’ used on PC04-PL

(PC04-P for PDP8/L)
Code ’P’"" used on PC0O4-PM

(PCO4-PA for PDP8/L)
Code "R’ used on PC04-R

{(RDR & PS 50/60 Hz)
Code 'S’ used on PC0O4-RB

PCO4-RB

00006

(PCO4-R for PDP8/I and PDP8/L)
1

*CHASSIS AND POWER SUPPLY ASSEMBLY

70-06246-00

*Cover Assy. (Punch/Reader)

70-06252-01

A,B,C,D,E,F

*Cover Assy. (Punch)

70-06252-02

L,M,N,P

*Cover Assy. {Reader)

70-06252-03

R,S

*Cover Assy. (Punch/Reader and SCR)

70-06252-04

G,H

*Cover Assy, (Punch/Reader and SCR)

70-06252-06

#*Cover, PCO (Basic & Comb)

12-09396-02

**Cover, PCO (Punch)

12-09396-04

L,M,N,P

**Cover, PCO (Reader)

12-09396-06

J,K

**Bezel, PCO

74-07099-00

**Bezel, Switch

74-07134-01

A,B,C,D,E,F

**Bezel, Switch

74-07134-02

L,M,N,P

**Bezel, Switch

74-07134-03

R,S

**Bezel, Switch

74-07134-04

G,H

**Bezel, Switch

74-07134-05

**Bezel Switch

74-07134-06

**Nut, Hex No. 6-32

90-06558-00

**Shim, Bezel

74-07849-00

**Screw, Phi Hd Pan No. 6-32 x % Lg

90-06020-01

**Washer, Flat No. 6

90-06656-00

00053

J,K
A,B,C,D E,F,

G,H,J,K

* *Washer, Lock No. 6 int Tooth

90-06633-00

*Screw, Phl Hd Flat No. 6-32 x 5/16 Lg

90-06021-02

©®Knob Reader

12-04747-00

*READER ASSEMBLY

70-06247-00

L
00053

J,K

A,B,C,D,E,F,

G,H,J,K,R,S

*Screw, Phl Hd Pan No. 6-32 x % L.g

90-06024-01

*Washer, Flat No. 6

90-06653-00

*Washer, Lock No. 6 Int Tooth

90-06033-00

*TAPE CONTAINER

74-07131-00

*Screw, Phl Hd Flat No. 4-40 x 3/8 Lg

90-06011-02

IPB-PCO4

FIG

ECO

CUT-IN

ITEM
NO.

DESCRIPTION

DEC | rcos.
PART NO. | oooo0

VENDOR

| USEDON
CODE

CODE

PART NO,

REF

FIG
NO.

1—

19
20

*Washer, Int Tooth No. 4
*Nut, Hex No. 4-40

90-06632-00

*SWITCH ASSEMBLY
*SWITCH ASSEMBLY
*SWITCH ASSEMBLY
*SWITCH ASSEMBLY

54-08310-03
54-08935-00
54-08310-03
54-08310-05

90-06556-00

A,B,C,D,EF
L,M,N,P
G,H
J,K

*Screw, Phl Hd Pan No. 6-32 x 3/8 Lg

90-06022-01

*Washer, Flat No. 6

90-06653-00

*Washer, Lock No. 6 Int Tooth

90-06033-00

*THYRECTOR

11-00106-00

A,B,C,D,EF,

*PUNCH ASSEMBLY (60 Hz)

70-06248-01

A,C,E,G,

5
6
5
5

L,M,N,P

J,L,N

*PUNCH ASSEMBLY (50 Hz)

70-06248-02

B,D,F,H,

K,M,P

*Screw, Phl Hd Pan No. 6-32 x 5/16 Lg

90-06021-01

*Nut, Keps No. 6-32

90-06560-00

E*CHAD BOX ASSEMBLY

74-05300-00

*CHAD BOX ASSEMBLY

12-10272-00

31
32

*SCR DRIVER ASSEMBLY
*TRIAC DRIVER ASSEMBLY

54-08385-00
70-06520-00

*Screw, Phi Hd Pan No. 6-32 x 3/4 Lg

90-06026-01

*Washer, Lock No. 6

90-06033-00

*Spacer, Hex No. %4 AF x 3/8 Lg x No. 6 hole

90-06801-00

*BRACKET RESISTORS

74-08091-00

G,H
J,K

00022

8
9

A,B,C,D,E,
F,G,H,J,
K,

L,R,S

EResistor (R1 thru R8) 50 Ohm 20W 5%
*Resistor (R1 thru R8) 25 Ohm 40W 5%

13-09896-00

00022

A,B,C,D,E,
F,G,H,JK,

L,R,S

*Washer, Flat No. 10

90-06664-00

*Screw, Phl Hd Pan No. 10-32 x 2% Lg

90-06083-01

*Washer, Lock No. 10

90-06635-00

*Nut, Keps No. 10-32

90-06565-00

*WIRED ASSEMBLY

70-06247-00

*WIRED ASSEMBLY

70-06268-01

*WIRED ASSEMBLY

70-06268-02

*Screw, Phl Hd Pan No. 8-32x 3/8 Lg

90-06037-01

*Washer, Lock No. 8

90-06634-00

*POWER SUPPLY COVER

74-07438-00

*DEC NAME PLATE

90-08141-00

*Spacer, Hex No. 3/8 x 3/4 Lg

90-06823-00

*Screw, Phi Hd Pan 8-32x 1 Lg

90-06043-01

*1/0O Cable, PC04 (W033 to W077)

70-06281-00

A,B,C,D,G,H,
L,M,R,S

E,F,N,P
| 00053

J,K

A,B,C,D,G,H,
M,N,R,S

*Cable Connector (M926 to W033S)

74-07067-01

*Cable Connector {Punch) (M926 to W033S)

70-06145-01

*Cable Connector (M926 to W0338)

74-07067-03

*SCR, MODULE RETAINER

74-05642-00

E,F

N,P

| 00053

J.K

A,B,C,D,E,
F,G,H,JK,

L.P,R,S

**Module Retainer

12-09377-02

**Screw No. 10-32 x 4-15/16 Lg

74-05642-00

**Screw No. 10-32 x 8-7/16 Lg

74-05642-01

*Module Retainer, Universal

12-09850-00

*Screw, Phl Fillister Hd No. 8-32 x 1% Lg

90-07799-06

*Bar, Hold Down (6 in.)

74-08339-07

5/6

IPB-PCO4

PARTS UST>

PC04-03

Figure 2.

Chassis and Power Supply Assembly

IPB-PCO4

FIG

ECO

CUT-IN

ITEM

DEC

NO.
2—

DESCRIPTION

PART NO. |

CHASSIS AND POWER SUPPLY ASSEMBLY

70-06246-00

*FRONT PANEL

74-07075-00

90-06020-02

*Screw, Phl Hd Flat No. 6-32 x % Lg

*Nut, Keps No. 6-32

90-06560-00

*CHASSIS

74-07074-00

*TRANSFORMER

16-09357-00

*Screw, Phl Hd Pan No. 10-32 x 3/8 Lg

80-06071-01

*Washer, Flat No, 10

90-06664-00

*Washer, Lock No, 10

90-06635-00

*CAPACITOR 80,000 MFD

10-09190-00

*Bracket, Capacitor

*Screw, Phl Hd Flat No. 8-32x % Lg

*Nut, Keps No. 8-32

90-06563-00

*Tab, Connector

90-076192-00

00000

CODE

REF

FIG
CODE]

PART NO.

| NO.
1

12-01406-00

*CAPACITOR, 8600 MFD 50V

10-02811-00

*Bracket, Capacitor

12-10249-00

*Screw, Phl Hd Pan No. 6-32 x 5/16 Lg

20-06021-01

*Washer, Lock No, 6

90-06633-00

*CAPACITOR, 18000 MFD

10-09188-00

* Bracket, Capacitor

12-09242-00

*POWER REGULATOR ASSEMBLY

70-06512-00

*BRACKET MOUNTING BAR (R.H.)

74-07065-01

*BRACKET MOUNTING BAR (L.H.)

74-07065-02

*Screw, Phi Hd Pan No. 6-32 x 3/8 Lg

90-06022-01

*JONES STRIP

90-06210-00

*Stand-off, Hex No. 6-32 x 5/16 Lg

90-06842-00

*Cover, Jones Strip

53-03184-00

*Cover, Jones Strip

53-09641-00

*Serew, Phl Hd Pan No. 6-32 x 1-1/8 Lg

90-07853-01

*Switch, Unit ON/OFF PWR

12-04722-00

*Power Inlet, Amphenol

12-01252-00

*Power Qutlet, Hubbell

12-01251-00

*Clamp, Cable

12-02704-00

*Screw, Phi Hd Pan No. 4-40 x 3/8 Lg

90-06011-01

*Nut, Keps No. 4-40

90-06557-00

*Holder, Fuse

90-07242-00

*Fuse, 3 Amp Slo Blo

90-07218-00

*Chassis-Trak Set

12-09147-00

IPB-PCO4

USED ON

90-06035-02

VENDOR

PCO4-

00009

00051

PARTS LIST

30S
31w
23N

PCO4-04

Figure 3.

Power Regulator Assembly

1PB-PC0O4

FIG

ECO

CUT-IN

NO.
3—

DESCRIPTION

PCO4-

USED ON

PART NO.

00000

CODE

POWER REGULATOR ASSEMBLY

54-08407-00

POWER REGULATOR ASSEMBLY

70-06512-00

@Screw, Phi Hd Pan No. 6-32 x 3/8 Lg

90-06022-01

*Heatsink, Power Regulator

74-07069-00

3
4

[*POWER REGULATOR BOARD ASSEMBLY

54-08918-00

**Tab, Faston

90-07113-00

**Resistor, 180 Ohm %W 5%

13-00260-00

**Transistor, DEC No. 2219

15-01881-00

**Capacitor, 47 MFD 20V 20%

10-00079-00

* * Resistor, 68 Ohm %W 10%

13-00220-00

**Transistor, No. 2N4234

15-04802-00

¥ *Resistor, 470 Ohm %W 5%

13-00315-00

**Resistor, 3K Ohm %W 5%

13-00431-00

**Diode, 3.9V 5% No. IN748A

11-00122-00

**Diode, No. IN4001

11-02842-00

11-09988-00

**Dijode, No. IN964B

**Resistor, Potentiometer, 200 Ohm %W 20%

13-09150-10

**Resistor, 15 Ohm %W 10%

13-01421-00

* *Resistor, Potentiometer, 50 Ohm %W 20%

13-09150-11

**Capacitor, 100 MFD 20V 20%

10-00016-00

**Transistor, DEC No. 6534D

15-03408-00

**Transistor, DEC No. 6531

15-09338-00

*TRANSISTOR, No. 2N3790

15-03399-00

*Screw, Phl Hd Pan No. 6-32 x 7/16 Lg

90-06023-01

*Nut, Keps No, 6-32

90-06560-00

*Washer, Insulated

90-06721-00

*FUSE HOLDER

90-06996-00

*Screw, Phl Hd Pan No. 6-32 x 3/8 Lg

90-06022-01

*Fuse,

90-07211-00

REF
FIG

CODE

PART NO.

NO,
2

| 00009

54-08308-00

*POWER REGULATOR BOARD ASSEMBLY

1 Amp Fast-Blow

VENDOR

DEC

00032

£%

ITEM

00032

[*Fuse, 2 Amp Slow-Blow
*Fuse,

4 Amp Fast-Blow

90-07219-00

00023

*BRIDGE, RECTIFIER No. MDA 960-3

11-09366-00 | 00032

*Screw, Phl Hd Pan No. 6-32 x 5/8 Lg

90-06025-01

00032

*Washer, Flat No. 6

90-06656-00

| 00032

*BRIDGE, RECTIFIER DM2

11-05397-00

*Screw, Phil Hd Pan No. 6-32 x 3/4 L.g

90-06026-01

*TRANSISTOR No. 2N3715

15-03068-00

*Screw, Phl Hd Pan No. 4-40 x % Lg

90-06009-01

*Washer, Lock No. 4 Int Tooth

90-06632-00

IPB-PCO4

—

PARTS LIS

PCO4-05

Figure 4.

Reader Assembly

IPB-PCO4

ECO
CUT-IN

&
ITEM

DEC

NO.
4—

DESCRIPTION

PCO4-

PART NO. | oooo0

READER ASSEMBLY

70-06247-00

@Screw, Phl Hd Pan No, 6-32 x % Lg

90-06024-01

®Washer, Lock No. 6 Int Tooth

90-06033-00

®Washer, Fiat No. 6

90-06653-00

* Reader Plate

74-07085-00

*SLO-SYN DRIVING MOTOR REWORK

74-07684-00

**Slo-Syn Driving Motor

12-09369-00

**Insert, Southco No. 6-32

90-09206-00

*Screw, Phl Hd Truss No. 6-32 x 5/8 Lg

90-06025-03

*Washer, Flat No. 6

90-06656-00

*Washer, Lock No. 6 Int Tooth

90-06633-00

*Screw, Phi Hd Pan No. 6-32 x % Lg

90-06024-01

*TAPE SPROCKET

12-04899-00

*Screw, Set Socket Hd No. 6-32 x 1/8 Lg

90-06290-00

*PHOTO TRANSISTOR ASSEMBLY

70-06267-00

**Photo Transistor Assembly(obsolete)

54-08306-00

54-09227-00 | 00039

**Flexprint (11 conductor)

91-05692-02

**Cable Connector (W077)

Wo077

*Shim, Photo Transistor Board (deleted)

74-07800-00

*Screw, Phl Hd Pan No. 2-56 x % Lg

90-06001-01

*Washer, Lock No. 2 Int Tooth

90-06631-00

*Washer, Flat No. 2

90-06653-00

*Screw, Phi Hd Pan No. 6-32 x 7/8 Lg

20-06027-01

*Spacer, Hex No. 6-32 x 5/16 Lg

90-06842-00

*Spring, over center (delete)

74-05247-00

*Spring, over center

12-09863-00

*Arm, Spring

74-07118-00

*Screw, Phl Hd Pan No. 4-40 x % Lg

90-06009-01

*Washer, Flat No. 4

90-06656-00

*Washer, Lock No. 4 Int Tooth

90-06655-00

*RESISTOR 2.0 Ohm 10W

13-09577-00

*Screw, Phi Hd Pan No. 6-32 x 2% Lg

90-07851-00

*Washer, Lock No. 6 int Tooth

90-07649-00

*Washer, No. 2153 H.H. SMITH No. 6

90-07632-00

*Tab, Faston (Male)

90-07851-00

*Screw, Phl Hd Pan No. 6-32 x 1 3/4 Lg

90-06031-01

*Nut, Keps No. 6-32

90-06560-00

*Solderless Connector

90-06780-00

*Shaft, Reader Plate

74-07120-00

*Knob, Reader

12-04747-00

*Screw, Socket Hd Cap No. 6-32 x 3/4 Lg

90-06332-00

74-07119-00

*BLOCK, READER

*Bulb No. 6475 OSRAM

12-04734-00

*Spring, Bulb

74-07116-00

*Screw, Phl Hd Pan No. 6-32 x % Lg

90-06020-01

*LENS (obsolete)

*LENS

74-04989-00

*DEPRESSOR, TAPE

74-07121-00

*BRACKET, TAPE HOLD DOWN

74-07144-00

*GUIDE, TAPE PATH

74-07076-00

*Screw, Phl Hd Pan No. 6-32 x 3/8 L.g

90-06022-01

IPB-PCO4

CODE

REF
FIG

CODE

PART NO.

NO.
1

**Photo Transistor Assembly
16

VENDOR
USED ON

00019

§ 00019
2

FIG

ITEM

NO.

5—

ECO

DEC

DESCRIPTION

54.08310-

USED ON

PART NO. | 00001

CODE

SWITCH ASSEMBLY

54-08310-00

Codse "“A’ used on PCO5-P and PA

54-08310-01

Code ‘"B’ used on PC04-C and CA

54-08310-03

54-08310-04

|CODE,

FIG

PARTNO.

|{NO.
1

PCO5-C and CA

Code “C”" used on PC04-B, BA, BB,
BC, BL, and BM
Code “D"" used on PCO4-CL and CM

54-08310-05

| 00005

NOTE
54-08310-02 deleted and replaced by

54-08935 (Ref. Figure 6)
1

*Printed Circuit Board

50-08309-00

*Button, Rocker Switch

12-05941-00

*Switch, Momentary

12-05375-00

*Switch, Rocker

12-05317-13

*Rubber, Sponge

18-09653-00

*Bar, Switch Board Spacer

74-07175-00

*Spacer, No. % AF x % Lg (added)

90-06803-00 | 00004

*Screw, Phl Hd Pan No0.6-32 x % Lg (delete)

20-06020-01

*Screw, Phl Hd Pan No. 6-32 x 3/4 Lg

20-06026-01

*Washer, Lock No. 6 Int Tooth

90-06633-00

00004

*Spacer, Hex No. ¥4 AF x 3/4 Lg

90-07938-00

*Screw, Phl Hd Pan No. 6-32 x % Lg

90-06020-01

*Shield, Switch Assembly {added)

53-09640-00

| 00004

*Transistor DEC 6531

15-09338-00

00001

14
15

[’Transistor DEC 6534D (wrong Part No.)

15-03409-01 { 00001

*Transistor DEC 6534D

15-03409-03

00002

* Resistor 470 Ohm %W 5%

13-00316-00

| 00001

8
9

PCO4-06

Figure 5.

Switch Assembly

13/14

IPB-PCO4

FIG

ECO

ITEM
NO.
6—

DESCRIPTION
PR SWITCH BOARD

DEC
PART NO.

54.08035 | USED ON
00001
CODE

54-08935-00

|PC05-00018

FIG
CODE}

PART NO.

NO.
1

{Replaces 54-08310-02)
1

®*Board, Etched Circuit

50-08934-00

*Switch, Rocker

12-05941-00

*Switch, Rocker

12-05375-00

*Button, Rocker Switch

12-05317-07

*Bar, Spacer (Switch Board)

74-07175-00

*Screw, Phl Hd Pan No. 6-32 x % Lg

90-06020-01

*Washer, Lock No. 6 Int Tooth

90-06633-00

*Spacer, No. 3/8 AF x 3/4 Lg

90-07938-00

*Transistor, DEC 6531

15-09338-00

*Transistor, DEC 6534D

15-03409-00

* Resistor, 470 Ohm %W 5%

13-00316-00

6
7

PCO4-07

Figure 6.

PR Switch Assembly

15/16

IPB-PC04

PARTS LST>

PC04-08

Figure 7.

Punch Assembly

IPB-PC0O4

FIG

ECO

CUT-IN

ITEM
NO.

DESCRIPTION

VENDOR

DEC

PCO4-

USED ON

PART NO.

00000

CODE

PUNCH ASSEMBLY

70-06248-00

Code A" used on PUNCH ASSEMBLY 60 Hz

70-06248-01

A
B

Code "B’ used on PUNCH ASSEMBLY 50 Hz

70-06248-02

*Chassis, Punch

74-07071-00

*Motor, GE

12-09365-00

*Serew, Phi Hd Pan No. %4-20 x ¥ Lg

90-06056-01

*Washer, Lock No. % Int Tooth

90-06637-00

*Capacitor 7 MFD

10-02038-00

*Bracket, Capacitor Type B Footed

10-02028-00

*Screw, Phl Hd Pan No. 6-32 x % Lg

90-06024-01

*Nut, Keps No. 6-32

90-06560-00

*Cap, Capacitor

90-08164-00

91-07698-10

*Tube, Chad Extension

*Tube, Chad

74-07386-00

*PUNCH PAPER TAPE (ROYTON 500)

30-09356-00

*Spacer, Hex No. 6-32 x % x 1% Lg

90-06811-00

*Screw, Phi Hd Pan No. 6-32 x 1-3/4 Lg

90-06031-01

*Washer, Flat No. 6

90-06656-00

*Washer, Lock No. 6 Int Tooth

90-06633-00

*Chute, Tape

74-08171-00

*Depressor, Tape

12-09915-00

*Spring, Torsion

12-09924-00

*Pin

74-08172-00

*Washer, Nylon

90-08893-00

#1E" Ring, Truarc

90-09057-00

*Knob, Punch

12-09904-00

*Pulley (60 Hz)

74-06089-01

*Pulley (50 Hz)

74-06089-02

*Belt

12-04760-00

*PUNCH FEED BRACKET

74-07084-00

*PUNCH FEED BRACKET

74-08088-00 | 00021

*Spring

90-09045-00
20-09047-00

1 C" Washer

*Hinge

12-04760-00

*Screw, Phl Hd Pan No. 6-32 x 3/8 Lg

90-06022-01

iPB-PCO4

FIG
CODE

PART NO.

NO.

REF

2 (Ref)

dlijgliltiall

PARTS LIST

-— [Te]

1) [/,

PCO4-09

w2 3 g 8.

Assembly
iver
SCRD river

— o))

tPB-.PCOA

FIG

ECO

ITEM

DEC

NO.

DESCRIPTION

8—

SCR DRIVER ASSEMBLY

54-08385-00

*Chassis

74-07070-00

*Diode MDA 952-5

11-05280-00

*Screw, Phi Hd Pan No. 6-32 x 7/8 Lg

90-06027-01

*Nut, Kep No. 6-32

90-06560-00

*Thyractor

GRS20SP4B4

11-00106-00

*Diode C20B

11-01820-00

*Spacer, Phenolic No. % Dia x 7/16 Lg

20-06892-00

*Screw, Nylon No. 6-32 x 3/4 LLg

90-07953-00

*Washer, Lock No. 6 Int Tooth

90-06633-00

¥*Nut, Nylon No. 8-32

90-07954-00

*Tab

90-07113-00

*Connector, Solderless

90-06979-00

*TERMINAL BOARD ASSEMBLY

54-03770-00

**Terminal Board

50-03717-00

**Diode No. MR2064

11-03183-00

**Resistor (R5) 1.5K Ohm %W 5%

13-00391-00

**Resistor (R4) 12K Ohm %W 5%

13-00488-00

**Resistor (R3) 3K Ohm %W 5%

13-00432-00

**Transistor DEC No. 2894-3B

15-03099-00

**Resistor (R1, R2) 47 Ohms %W 5%

13-01695-00

**Relay No. 268-2A x2, 12 Vdc

12-02267-00

*Spacer, Hex No. % x 5/16 Lg

90-06857-00

*Screw, Phl Hd Pan No. 6-32 x % Lg.

90-06020-01

*Screw, Phi Hd Pan No. 6-32 x 3/8 Lg

90-06022-01

*Grommet

90-07015-00

IPB-PCO4

54-08385 | USED ON

PART NO, | 00001

CODE

FIG

|[CODE|

PARTNO. | NO.
1

2 (Ref)

;

InennEn

PARTS LIST

1 =

14S

isL

n
%

Figure 9.

Triac Driver Assembly

PCO4 - 10

i
i

¢
i

IPB-PCO4

FIG

ECO

CUT-IN

ITEM

DEC

NO.
9—

DESCRIPTION

PART NOQO. | 00000

TRIAC DRIVER ASSEMBLY

70-06520-00

*Chassis

74-07070-00

*TRIAC ASSEMBLY

54-08384-00

**Triac 8 Amp 400V DEC No. 40669

15-10070-00

**Relay, 12 Vdc DEC No. 40034

12-10101-00

**Diode MR2064

11-03183-00

**Resistor (R4) 330 Ohm %W 5%

13-00295-00

**Transistor (Q1) DEC No. 6534D

15-03409-00

**Resistor (R1, R3) 1K Ohm %W 5%

13-00365-00

**Resistor {R2) 2K Ohm %W 5%

13-02388-00

**Resistor (R5, R6) 100 Ohm %W 5%

13-00228-00

**Capacitor 0.1 MFD 400V 20%

10-10075-00

*Spacer, Hex No. % AF x 3/8 Lg

90-06844-00

*Screw, Phi Hd Pan No. 6-32 x 5/16 Lg

90-06021-01

*Screw, Phl Hd Pan No. 6-32 x % Lg

90-06020-01

*Washer, Lock No. 6 int Tooth

90-06633-00

*Grommet

90-07015-00

*Terminal, solderless

90-07917-00

VENDOR

20-06520- | USED ON

[PC05-00024

CODE

REF

FIG
CODE

PART NO.

NO.

¥,

IPB-PCO4

ILLUSTRATED PARTS BREAKDOWN
COMMENT SHEET
Any and all comments and suggestions for correcting errors and/or additional information to improve this manual

will be reviewed and researched for possible use when this manual is revised and/or reprinted. Enter your comments
and suggestions in the form provided below and return to Technical Documentation.

PUBLICATION NO.

MODEL

FIGURE NO.

ITEM NO.

FIGURE NO.

CHANGE FROM

CHANGE TO

FIGURE NO.

ITEM NO.

FIGURE NO.

CHANGE FROM

CHANGE TO

FIGURE NO.

ITEM NO.

FIGURE NO.

CHANGE FROM

CHANGE TO

ADDITIONAL COMMENT(S)

Name

Cost Center
date:

ITEM NO.

eT
FR

—

FoOld Here

—

—_—

FIRST CLASS
PERMIT NO. 33
MAYNARD), MASS.

BUSINESS REPLY MAIL

NO POSTAGE STAMP NECESSARY IF MAILED IN THE UNITED STATES
Postage will be paid by:

Digital Equipment Corporation
Technical Documentation Department

146 Main Street
Maynard, Massachusetts 01754