Digital PDFs

XX-D16F8-AF

May 2005

5 pages

Original

41.5kB

Document:	UDDI for OpenVMS, based on UDDI4 (Universal Description, Discovery, and Integration) Installation Guide and Release Notes
Order Number:	XX-D16F8-AF
Revision:	0
Pages:	5
Original Filename:	uddi_relnotes.pdf

OCR Text

UDDI for OpenVMS, based on UDDI4
(Universal Description, Discovery, and Integration)
Installation Guide and Release Notes
UDDI for OpenVMS Version 1.0
Based on UDDI4J Version 2.0.2, licensed under the IBM Public License V1.0
HP-VMS-UDDI-V0100--1.PCSI
January 2005
Contents
Before Installing UDDI for OpenVMS
Hardware Prerequisites
Software Prerequisites
Downloading and Installing UDDI
Downloading the Kit
Installing the Kit
Configuration Tips
Removing the Kit
After Installing UDDI for OpenVMS
Release Notes
Support

Before Installing UDDI for OpenVMS
Hardware Prerequisites
UDDI for OpenVMS is available on OpenVMS Alpha and OpenVMS Industry Standard 64.
Disk Space Requirements
Downloading the UDDI Version 1.0 PCSI file requires approximately 6610 blocks (3.22 MB) of disk
space. Installing the product requires an additional 6705 blocks (3.27 MB).

Software Prerequisites
The following software is required for UDDI.
Operating system:
•
•

OpenVMS I64 Version 8.2 or higher
OpenVMS Alpha Version 7.3-1 or higher

For both OpenVMS I64 and OpenVMS Alpha systems:
•
•
•
•

HP Software Development Kit (SDK) for the Java™ Platform Version 1.3.1 (or higher)
All patches required for the Java SDK. Check the SDK documentation for the version of Java
you are installing to be sure that you have all prerequisite OpenVMS operating system
patches.
SOAP Toolkit Version 2.0 or higher for OpenVMS, available from
http://ww.hp.com/products/openvms/soap/
JAXP-1.1 compliant XML parser such as Xerces or Crimson must be configured before the
UDDI product will operate. (However, you can install UDDI without an XML parser being
configured.)
Note: The Crimson parser is included with the Java SDK Version 1.4 (or higher). However,
HP recommends using the Apache Xerces XML parser because of known bugs using
UDDI4J and Crimson. (Specifically, some of the samples are known to not run correctly when
using Crimson.) OpenVMS provides support for the Apache Xerces parser in the product:
XML-J for OpenVMS Version 2.0 or higher for OpenVMS, available from
http://www.hp.com/products/openvms/xml/

Downloading and Installing UDDI
Downloading the Kit
The UDDI software is available for the Alpha and I64 platforms.
The UDDI PCSI kit is included with the OpenVMS I64 and OpenVMS Alpha layered product
distributions. A compressed, self-extracting file is also available for download from the UDDI web site
at http://www.hp.com/products/openvms/uddi/. Use the DCL RUN command to expand the
compressed file.
Installing the Kit
Before you begin installing UDDI for OpenVMS, be sure you have met the prerequisites for this
product.
Note: The BYPASS, GRPNAM, and SYSNAM privileges are required to install UDDI.
To install the UDDI for OpenVMS kit, enter the following command:
$ PRODUCT INSTALL UDDI

For a description of the features you can request with the PRODUCT INSTALL command when
starting an installation such as running the IVP, purging files, and configuring the installation, see the
POLYCENTER Software Installation Utility User's Guide.
As the installation procedure progresses, the system displays information similar to the following:
$ PRODUCT INSTALL UDDI /SOURCE=DISK:[UDDI_KIT] /DEST=DISK:[UDDI]
The following product has been selected:
HP VMS UDDI V1.0

Layered Product

Do you want to continue? [YES]
Configuration phase starting ...
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
HP VMS UDDI V1.0: UDDI V1.0 for OpenVMS
(C) 2004 Hewlett-Packard Development Company, L.P.
* This product does not have any configuration options.
Execution phase starting ...
The following product will be installed to destination:
HP VMS UDDI V1.0
DISK:[UDDI.]
Portion done: 0%...20%...30%...40%...50%...60%...70%...80%...90%
*******************************************************************************
Defining system logical UDDI$ROOT...
Please add the logical UDDI$ROOT in SYS$MANAGER:SYLOGICALS.COM
For example: $define/system/trans=concealed/nolog UDDI$ROOT DISK:[UDDI.uddi4j.]
*******************************************************************************
...100%
The following product has been installed:
HP VMS UDDI V1.0
$

Layered Product

After Installing UDDI
After the installation is complete, perform the following tasks.
1. Run the validation tests. Enter the following command:
$ @uddi$root:[openvms]UDDI-IVP
The following output is displayed:
Starting UDDI IVP...

Note: This procedure verifies the correct installation of the UDDI product using a bundled
version of the prerequisite SOAP and Xerces software. The full and supported products
should be installed before using UDDI.
This IVP attempts to connect to a UDDI registry available on the internet by using the HTTP
protocol. This is the same protocol used by web browsers. Make sure that the computer on
which you are running the tests has access to the internet.
Typically, a company will have employees connect to a HTTP proxy server on a specific port
to gain access to the internet. This IVP is not able to automatically discover the HTTP proxy
server. If you use an HTTP proxy server, specify the address and port number. For example:
Please enter proxy server name or address [press return if not used]: proxy.hp.com
Please enter proxy port number [press return if not used]: 8080
Running sample...
The file UDDI$ROOT:[openvms]UDDI_IVP.LOG will contain the result of the test
%DCL-S-SPAWNED, process USER_165 spawned
%DCL-S-ATTACHED, terminal now attached to process USER_165
%DCL-S-RETURNED, control returned to process _TNA7:
Cleaning up...

2. Validate that the samples have run successfully. The results of the IVP should look similar to the
following output:
$ type UDDI$ROOT:[openvms]UDDI_IVP.LOG
*********** Running FindBusinessExample ***********
Acme Health Insurance
Gold mining
S
S Asharaf's Credit
S&P Business

Configuration Tips
The IVP uses a bundled version of the prerequisite SOAP and Xerces software. The full and
supported products should be installed before using UDDI.
There are a number of .jar files that must be in your classpath to run the UDDI software. Refer to the
file uddi$root:[openvms]SETUP-UDDI4J.COM for help with establishing your classpath.
Removing the Kit
To remove UDDI for OpenVMS, enter the following command:
$ PRODUCT REMOVE UDDI

The following output is then displayed:
The following product has been selected:
HP VMS UDDI V1.0

Layered Product

Do you want to continue? [YES]
The following product will be removed from destination:
HP VMS UDDI V1.0
DISK$ODS5DISK:[SULLIVAN.TEST.]

Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
The following product has been removed:
HP VMS UDDI V1.0
$

Layered Product

Release Notes
This section contains notes on the current release of UDDI for OpenVMS.
There are currently no release notes for the Version 1.0 kit.

Support
Customer Release Version
Support for UDDI for OpenVMS is provided under existing OpenVMS service agreements through
standard support channels. See HP support at http://welcome.hp.com/country/us/en/contact_us.html
for worldwide support center telephone numbers.
If you do not have a support contract and are not interested in acquiring one, you can informally
exchange information with other users in the OpenVMS newsgroup comp.os.vms.
For technical feedback to the UDDI for OpenVMS engineering team, please send mail to
OpenVMSUDDI@hp.com.