Digital PDFs

XX-E72AD-CF

May 2005

4 pages

Original

33.6kB

Document:	CSWS_PERL for HP Secure Web Server for OpenVMS (based on Apache) Installation Guide and Release Notes
Order Number:	XX-E72AD-CF
Revision:	0
Pages:	4
Original Filename:	csws_modperl_relnotes.pdf

OCR Text

CSWS_PERL for HP Secure Web Server
for OpenVMS (based on Apache)
Installation Guide and Release Notes
November 2005
CSWS_PERL Version 2.1 for OpenVMS Alpha
CPQ-AXPVMS-CSWS_PERL-V0201--1.PCSI
CSWS_PERL Version 2.1 for OpenVMS I64
HP-I64VMS-CSWS_PERL-V0201--1.PCSI
Contents
What’s New
Software Prerequisites
Documentation
Before You Begin the Installation
Installing CSWS_PERL for OpenVMS
Post-Installation Task
Removing CSWS_PERL for OpenVMS
Release Notes

What’s New
Two new kits for CSWS_PERL Version 2.1 are now available – one for OpenVMS I64 Version 8.2
and higher, and one for OpenVMS Alpha 7.3-2 and higher.
CSWS_PERL Version 2.1 is intended to work with the Secure Web Server Version 2.1 only.
(Use CSWS_PERL Version 2.0 and Perl Version 5.6-1 ECO 3 with the Secure Web Server
Version 2.0. Use CSWS_PERL Version 1.1-1 and Version Perl 5.6-1 with the Secure Web
Server Version 1.3-1.)
CSWS_PERL Version 2.1 is based on mod_perl 2.0.1. See http://perl.apache.org/ for more
information.
Software Prerequisites
The CSWS_PERL for OpenVMS kit requires that the following software is installed before you
install CSWS_PERL:
•
•

OpenVMS Alpha Version 7.3-2 or higher
- or OpenVMS I64 Version 8.2 or higher
Secure Web Server Version 2.1 for OpenVMS

•

Perl Version 5.8.6 (or higher) for OpenVMS

Documentation
For more information about mod_perl, see the Apache/Perl Integration Project.
See the Perl for OpenVMS Installation Guide and Release Notes for information about running
Perl.
Before You Begin the Installation
Before you begin the installation of CSWS_PERL, do the following:
•

Add logical definitions for Perl
You must define the logical PERL_ROOT before you install or remove the CSWS_PERL
kit. The CSWS_PERL kit installs several files that extend the capabilities of Perl. The
PERL_ROOT logical must be available to CSWS_PERL in order to add and remove
those files.
If you are running multiple versions of Perl, make sure that the Secure Web Server can
only see the version of Perl that has been modified to work with the Secure Web Server.
You can do this by adding the logical definitions to LOGIN.COM for the account running
the Secure Web Server. Note that if the logicals are defined this way, they must be JOB
logicals so that they can be passed to any subprocesses.
To define PERL_ROOT and PERLSHR, enter the following commands:
$ DEFINE/JOB PERL_ROOT DKB100:[PERL5_8_6.]/TRANS=CONC
$ DEFINE/JOB PERLSHR PERL_ROOT:[000000]PERLSHR.EXE

Installing CSWS_PERL for OpenVMS
To install the CSWS_PERL for the Secure Web Server for OpenVMS kit, enter the following
command.
Note: You must install the CSWS_PERL kit into the same device and directory where you
installed the Secure Web Server for OpenVMS.
For example:
$ SHOW LOGICAL APACHE$ROOT
"APACHE$ROOT" = "DISK1:[WEB_SERVER.APACHE.SPECIFIC.hostname.]
= "APACHE$COMMON:"
1
"APACHE$COMMON" = "DISK1:[WEB_SERVER.APACHE.]
$ PRODUCT INSTALL CSWS_PERL/DESTINATION=DISK1:[WEB_SERVER]
For a description of the features you can request with the PRODUCT INSTALL command when
starting an installation such as running the IVP, purging files, and configuring the installation, see
the POLYCENTER Software Installation Utility User's Guide.

As the installation procedure progresses, the system displays information similar to the following:
The following product has been selected:
CPQ AXPVMS CSWS_PERL V2.1

Layered Product

Do you want to continue? [YES]
Configuration phase starting ...
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
CPQ AXPVMS CSWS_PERL V2.1
Hewlett-Packard Development Company, L.P.
* This product does not have any configuration options.
Execution phase starting ...
The following product will be installed to destination:
CPQ AXPVMS CSWS_PERL V2.1
DISK1:[WEB_SERVER.]
Portion done: 0%..20%..30%..40%..80%..100%
The following product has been installed:
CPQ AXPVMS CSWS_PERL V2.1
Layered Product
CPQ AXPVMS CSWS_PERL V2.1
Post-installation tasks are required for MOD_PERL for OpenVMS.
The release notes give detailed directions. This information
is a brief checklist.
This installation modifies APACHE$ROOT:[CONF]HTTPD.CONF to
enable MOD_PERL. Check HTTPD.CONF for accuracy. The line
“Include /apache$root/conf/mod_perl.conf" should be the only
difference. Also study the MOD_PERL configuration file
(APACHE$ROOT:[CONF]MOD_PERL.CONF) for options required for your
site. The APACHE::Registry module is enabled by default and
the location "/perl" is defined to access it.
The Apache server must be shutdown and restarted to make these
changes to the HTTPD.CONF file take place. Test that MOD_PERL
is working by accessing the sample script from a browser:
http://your_web_server_host/perl/perl_rules.pl
Thank you for using the Secure Web Server for OpenVMS.

Post-Installation Task
•

Review MOD_PERL.CONF
Review the APACHE$COMMON:[CONF]MOD_PERL.CONF configuration file to be sure
it enables all of the features required for your site.

Removing CSWS_PERL for the Secure Web Server for OpenVMS
You can remove the CSWS_PERL kit by using the PRODUCT REMOVE command. The Secure
Web Server must be shut down before you remove CSWS_PERL.
To remove CSWS_PERL, enter the following commands:
$ SET DEF APACHE$ROOT:[000000]
$ @SYS$STARTUP:APACHE$SHUTDOWN
$ PRODUCT REMOVE CSWS_PERL
The PRODUCT REMOVE command removes all files created by this installation. It also attempts
to remove the directories defined by this installation. The removal also deletes the reference to
the MOD_PERL.CONF configuration file from the HTTPD.CONF file.
Release Notes
This section contains notes on the current release of CSWS_PERL.
•

Order of installing optional modules
Previous CSWS_PERL kits required that you install CSWS_PERL before installing other
optional kits, if you were installing the kits on the same system. This restriction has been
removed. You can install CSWS_PERL before or after CSWS_PHP and CSWS_JAVA, or
you can install one without the others.
However, you must install and configure the Secure Web Server for OpenVMS and Perl
for OpenVMS before you install CSWS_PERL.

•

File protections of Perl scripts
When you create a Perl script, make sure it is world readable and world executable.
For example:
$ SET FILE/PROTECTION=W:RE

•

MYSCRIPT.PL

Tracking versions of CSWS_PERL and Perl
The CSWS_PERL and Perl kits are tightly connected. Future versions of Perl or
CSWS_PERL may not interact correctly across version numbers. This release of
CSWS_PERL works with Perl V5.8.6.

•

Shareable image mismatch
If you are pointing at the wrong version of Perl, an ident mismatch occurs and the
following error appears in the log file.
Syntax error on line 207 of /apache$root/conf/httpd.conf:
Can't locate API module structure `perl_module' in file
/apache$root/mod_perl.exe:
%LIB-E-ACTIMAGE, error activating image !AS