Digital PDFs

EK-0RP04-IP-2

May 1979

38 pages

Original

10MB

view download

OCR Version

3.3MB

view download

Document:	RP04 Disk Pack Drive Illustrated Parts Breakdown
Order Number:	EK-0RP04-IP
Revision:	2
Pages:	38
Original Filename:

OCR Text

EK-ORP04-IP-002

RPO4
BREAKDO
HOW TO USE THE IPB

WN
|

GENERAL

This IPB is compiled following the organization and nomenclature
of the engineering drawing structure.

MAJOR ASSEMBLY LOCATOR

Thé Major Assembly Locator (first illustration) is an index that
provides a description and a figure reference for all illustrations used
in this manual.

ECO Cut-In — The notation at the top of this column indicates the
ECO level of the system (option), at which the IPB was initially
prepared. Subsequent ECO level designations, that modify existing
parts or add new parts to the device, are inserted in the ECO Cut-in

column next to the part that is added or modified. A bracket ([)

preceding the item description is used to indicate the parts affected
by ECO’s.

Vendor Code/Part No. — Indicates vendor parts that are not stocked

INDENTED PARTS LIST

This manual identifies each assembly being broken down (figure

reference callout), and all parts of that assembly. Further
breakdown of an assembly is shown by an asterisk (*) preceding the
item callouts in the Description Column. The number of asterisks
preceding an item is used to denote the subordination of that item
with respect to the Major Assembly. A single asterisk preceding an
item description indicates that the item is part of the major
assembly being illustrated. Items that are subordinate to single
asterisks items, are denoted by two asterisks (**) and immediately
follow the related single asterisk item. Additional asterisks are used,
as required, to denote further subordination. This system of part
identification, provides a means for the user to identify the next
higher assembly item and make alternate selections for parts when
the required replacement part or assembly is not immediately
available.

by DEC. Refer to the Field Service Spares Catalog (vendor part
number to DEC part number) for the vendor code cross-reference.

Used On Code — Letters in this column correspond to the variation
codes assigned in Figure 1. Parts with an Alpha notation(s) are used
only in those option variations. A blank indicates that the part is
used on all option variations.

Ref Fig No. — A cross reference between illustrations. For each
Major Assembly, the number in this column denotes the figure of
the next higher assembly. For all subassemblies, the number in this
column denotes the figure showing additional detailed breakdown.
SYMBOL USAGE

Hardware Designators — Alpha designators for screws (S), washers
(W), nuts (N), and retaining rings (R) are inserted after the item

number callouts on the illustration when stacked item numbers are

used.

COLUMN CALLOUT DESCRIPTION

Figure & Item — Indicates the figure number and item number of

each part.

Description — Lists the name of the part and pertinent
specifications (when required). Asterisks preceding the description
denote the subordination of the part to the next higher assembly.

Attaching Hardware — The @ symbol is inserted before any part
that is used as attaching hardware. Attaching hardware is denoted as
those parts that are not an integral part of the referenced assembly.

(NFR) Not Field Repairable — The (NFR) symbol is inserted after

any assembly that is not to be field dismantled.

DEC Part No. — Lists the DEC part ordering number. A blank in

Other Symbols — Any other symbols that are required for kits,
accessories, etc., will be explained and appear as part of the item

time of publication.

description.

this column indicates a DEC part number was not assigned at the

REVISION HISTORY

PRINTING
2nd Printing |

ECO LEVEL

DATE

RPO4

00008-00039 |

70-09729

00000-00004

70-09628

00000-00000

54-10817

00001-00002

7009731

00001-00003

7009732

00000-00000

70-12061

00004-00004

70-09660

00000-00002

70-12062

00001-00001

H764

00000-00007

7009614
70-06464
70-09491

00001-00003
00002-00005
00001-00003

OTHER IPB MANUALS REQUIRED

PAGES AFFECTED

10-12-79

TO SUPPORT THIS OPTION.. .....

N/A

EK-09728-IP

This 2nd Printing EK-ORP04-1P-002
SUPERSEDES 1st Printing DEC-RP04-IPB-1

DEC is not responsible for errors which may appear in the technical
description (including illustrations and photographs) of the products
covered by this manual.

modifications in the specifications of products documented in this

None

manual

granting of any license whatsoever to make, use or sell equipment

and further reserves

the right

to withdraw any of these

products from the market without notice.

the

descriptions

contained

constructed in accordance therewith.

this

manual

imply

the

|
Printed in U.S
. A.

)

all
dlilglilt}al

TRA

_RyR;\A\

-ALTRIRL ’

PARTS LIST

/
llll.

[

RP04-01

Figure 1.

RPO4 Disk Pack Assembly

IPB-RP0O4

Fl&G.

| ITEM

DEC

ECO

CgPEiN USED ON

PART NO. | 00008

CODE

RPO4-AA
RPO4-AB
RP0O4-BA
RP04-BB

A
B
C
D

*I1SS DISK DRIVE ASSEMBLY 60 Hz
*ISS DISK DRIVE ASSEMBLY 50 Hz

30-11447-01
30-11447-02

AC
B,D

*ENCLOSURE ASSEMBLY (DCL)
*ENCLOSURE ASSEMBLY (DCL)

70-09729-01
70-09729-02

A,B
C,D

DESCRIPTION

NO.

RP04 DISK PACK DRIVE ASSEMBLY

1—

Code A - Used on Model RP04-AA 60 Hz Single Port
Code B - Used on Model RP04-AB 50 Hz Single Port
Code C - Used on Model RP04-BA 60 Hz Dual Port
Code D - Used on Model RP04-BB 50 Hz Dual Port

1
2

30-11684-00

*DATA DISK PACK ASSEMBLY

4|
5

*Bolt, Hex Hd No. 5/16-8 x 2
*Washer, Flat (deleted)

90-06280-09
90-06679-00

6
7
8
9
10

*Nut, Kep No. 5/16
*Skirt, Front and Rear
*Washer, Flat No. 8
*Washer, Split Lock No. 8
*Screw, Phl. Thd Form No. 8-32 x 3/8

90-06568-00
74-11193-00
90-06661-00
90-06690-00
90-06418-01

11
12
13

90-06638-00

00026

74-12827-03
90-08203-00
90-06255-09

00010
00010
00038

‘+POWER CABLE ASSEMBLY (deleted) 50 Hz
+POWER CABLE ASSEMBLY (added) 50 Hz
tPOWER CABLE ASSEMBLY (deleted) 60 Hz
.tPOWER CABLE ASSEMBLY (added) 60 Hz

70-06464-01
70-06464-03
70-06464-02
70-06464-04|

B,D
00014 | B,D
A,C
A,C
00014

tPOWER SEQUENCE CABLE ASSEMBLY

70-09491-01

Washer, Internal Tooth Lock No. 5/16 (added)

*Ground Strap (added)
*Nut, Kep No. 1/4-20 (added)
*Bolt, Drive (added)

2
2

CABLE ASSEMBLIES (Not Shown)

BC06S-02
70-10122-00

tMASS BUS CABLE ASSEMBLY
tJUMPER CABLE ASSEMBLY

LABELS AND DECALS (Not Shown)

90-08141-00

tLABEL, Serial

74-13362-00
74-11884-00
74-11885-00
74-12570-00
74-11886-00

+LABEL, Daisy Chain Power (added)
r_’rDECAL, RP04-AA
tDECAL, RP04-AB (deleted)
|[tDECAL, RP04-AB (added)
tDECAL, RPO4-BA

74-11887-00
74-12571-00

T+D ECAL, RP04-BB (deleted)
- LtDECAL, RP04-BB (added)

iIPB-RP04

10
10
10
10

00014

00010

A
B
B
C

D
D

dlilaliltal

PARTS LIST

, >W)

, L2

\4/.\M/

,fi ‘3E1,Efl,u/3//m%/

’

J 8

RP04-02

Figure 2. Enclosure Assembly (Sheet 1 of 6)

IPB-RP0O4

dlifgli

PARTS

LIST

RP04-02A

Figure 2. Enclosure Assembly (Sheet 2 of 6)

IPB-RPO4

2030020

PARTS LIST

RP04-02B

Figure 2. Enclosure Assembly (Sheet 3 of 6)

IPB-RP04

dlilgli tla)
PARTS LIS

RP04-02C

Figure 2. Enclosure Assembly (Sheet 4 of 6)

IPB-RP0O4

PARTS LIST

RP04-02D

Figure 2. Enclosure Assembly (Sheet 5 of 6)

IPB-RP0O4

ZR50020

PARTS LIST

RP04-02E

Figure 2. Enclosure Assembly (Sheet 6 of 6)

IPB-RPO4

ECO

FlGn

| ITEM

DEC

DESCRIPTION

PART NO.

CUT-IN

70-09729

00000

|USED ON{

REF|
FIG |

CODE

ENCLOSURE ASSEMBLY (DCL) (Single Port)

70-09729-01

A.B

ENCLOSURE ASSEMBLY (DCL) (Dual Port)

70-09729-02

*Enclosure, Weldment (deleted)

70-09707-00

*Enclosure, Weldment (added)

70-12065-00

*POWER MONITOR BOARD AND

70-09628-00

TRANSFORMER ASSEMBLY

*Washer, Flat No. 8

90-06660-00

*Washer, Lock No. 8

90-06690-00

*Screw, Phi Pan Hd No. 8-32 x 1/2

90-06039-01

*Terminal Strip

90-07631-00

*Screw, Phl. Thd. Form No.6-32 x 5/8

90-09587-01

*Washer, Lock No. 6

90-07801-00
90-06653-00

‘

*Washer, Flat No. 6

*Spacer, Hex No. 6-32 x 3/8

90-06801-00

*Screw, Phl. Thd. Form No. 6-32 x 1.3/16

90-09588-01

*Cover, Terminal Strip

74-08463-03

*Grommets (added)

90-08209

14
15

*Decal
*POWER HARNESS ASSEMBLY

36-10267-00
70-09731-00

*Circuit Breaker (5 amp) (deleted)

12-10191-01

*Circuit Breaker (5 amp) (added)

12-10191-07

*Terminator

90-07095-00

*Grommet

90-07016-00

*Housing, Circuit Breaker

74-11897-00

*Connector, Faston (deleted)

*Connector, Quick Disconnect (added)

90-07970-00
90-07969-00

*Screw, Phl. Pan Hd. No. 6-32 x 3/16

90-08020-01

*Cable Tie, Screw Down

90-07033-00

*Strain Relief

90-08492-02

*Screw, Phl. Thd. Form No. 8-32 x 3/8

00-06418-01

*Cover, Circuit Breaker

74-11901-00

*RECEPTACLE HOUSING ASSEMBLY

70-09861-00

27
28
29

*Foot Leveler (added)
*Cable Tie Mounts (added)
*Cable Tie (added)

90-07600-00
90-08264-00
90-07032-00

*Washer, Flat No. 4

90-06655-00

*Washer, Lock No. 4

90-06688-00

*Screw, Phl. Pan Hd. No. 4-40 x 7/16

90-06012-01

*Retainer, Flat Cable

74-11602-00

*Washer, Flat (added)

90-06611-00

*Nut, Kep No. 8-32

90-06563-00

*CARD NEST CABLE ASSEMBLY

70-09732-01

00003

5}
00004

00002

00001
00003
00003

00003

(Single Port) (deleted)

_*CARD NEST and CABLE ASSEMBLY
- (Single Port) (added)
*CARD NEST CABLE ASSEMBLY
(Dual Port) (deleted)

. *CARD NEST and CABLE ASSEMBLY
(Dual Port) (added)

70-12061-00

RP0O4
00034

70-09732-02

70-12061-01

RP0O4

00034

IPB-RP0O4

FIG.

ECO

DEC

ITEM

NO.

PART NO.

DESCRIPTION

CUT-IN
70-09729

00000

REF

USED ON

FIG

CODE

NO.

___.i‘

*Nut, Cap No. 8-32
*Receptacle, Clip On (deleted)

90-06613-00

*Receptacle, Clip On (added)

90-08195-00
74-11198-00

*Sleeve, Cover
*Spacer

74-11587-00

*Screw Phl. Pan Hd. No. 8-32 x 3/8

90-06037-01

38
39
40

90-09616-00

*REAR PANEL ASSEMBLY

70-09662-00

**Foam 1/8 x 1/4

90-08273-00

*AIR BAFFLE ASSEMBLY

74-11166-00

*Screw, Phl. Pan Hd. No. 6-32 x 3/8

90-06022-01
90-06584-00

*Nut, Speed Push-on No. 6-32

*H764 POWER SUPPLY ASSEMBLY

H764-00

*Front Panel Assembly

70-09664-00

*Terminal, Ring Tongue (Blue) No. 10

90-07928-01

*Terminal, Ring Tongue (Blue) No. 6

90-07927-01

*Washer, External Tooth Lock No. 10

90-07651-00

iPB-RP04

00003

PARTS LIST

RP04-03

Figure 3.

Power Monitor Board and Transformer Assembly

IPB-RP04

FIG.

ECO

DEC

| ITEM

PART NO.

DESCRIPTION

NO.

POWER MONITOR BOARD AND

70-09628-00

IPB-RP0O4

*TRANSFORMER ASSEMBLY

**Transformer

**Connector (P8) (Pin Housing) Mate-N-Lok

**Tie Wrap, Screw Down

00O NO

**Terminal, Pin Contact

12-09378-00

**Tie Wrap

90-07880-00

*Nut, Speed "‘U”” Type

90-07963-00
90-06801-00

70-09627-00
16-11224-01

*Spacer

90-07033-00

*POWER MONITOR BOARD ASSEMBLY

12-09351-09
12-09351-06

*Screw, Phl Pan Hd No. 6-32 x .81

54-10817-00
90-08037-01

**Connector (P4) (Pin Housing) Mate-N-Lok

*Washer, Lock Int Tooth No. 6

90-06633-00

N
T G

TRANSFORMER ASSEMBLY

*Washer, Flat

90-06653-00

CUT-IN

70-09628

00000

USED ON

CODE

REF|
FIG

ETCH REV.B

Figure 4.

RP04-04

Power Monitor Board Assembly (Etch Rev. B)

IPB-RPO4

,
L

FIG.
&
ITEM

ECO
CUT-IN
DEC

NO.

DESCRIPTION

4—

PART NO.

POWER MONITOR BOARD ASSEMBLY

54-10817

00001

54-10817-01

REF
USED

ON|

FIG

CODE | NO.
3

(ETCH REV B)

*Board, Etched Circuit

50-10816-00

*Capacitor (C1, C2) .01 uF 100V +20% Disc

10-01610-01

*Diode (D1) D664

11-00114-00

*Diode (D2, D3, D4, D5) IN4004

11-05796-00

*Connector (J10) (Socket Housing) Mate-N-Lok 8 Pin

12-09340-00

*Connector (J11) (Socket Housing) Mate-N-Lok 6 Pin

12-09350-06

*Relay (K1) 12 Vdc

*Transistor (Q1) 2N3009B

12-09349-00

*Transistor (Q2) DEC 2219

15-01881-00

*Resistor (R1, R4) 330 Ohm 1/4W 5%

13-00295-00

- 15-03100-00

*Resistor (R2, R5) 3.9K 1/4W 5%

13-00444-00

*Resistor (R3) 10K 1/4W 5%

13-00479-00

*Jumper (W1, W2) Insulated (.4) (deleted)

90-09185-00

*Socket, Relay PC

12-09359-01

*Washer, Flat Nylon

90-06707-00

IPB-RP04

00002

PARTS LIST

ETCHREV.C

Figure 4A.

RP04-04A

Power Monitor Board Assembly (Etch Rev. C)

IPB-RPO4

ECO

FIG.

| ITEM

DESCRIPTION
POWER MONITOR BOARD ASSEMBLY

4A—

DEC

CUT-IN
54-10817

PART NO.

00002

54-10817-00

50-10816-00

*Capacitor (C1, C2) .01 uF 100V +20% Disc
*Diode (D1) D664

11-00114-00

wed
)
=)
ed
—

10-01610-01

*Diode (D2, D3, D4, D5) IN4004

11-05796-00

*Connector (J10) (Socket Housing) Mate-N-Lok 8 Pin
*Connector (J11) (Socket Housing) Mate-N-Lok 6 Pin
*Relay (K1) 12 Vdc

12-09340-00
12-09349-00

*Transistor (Q1) 2N3009B

15-03100-00

12-09350-06

*Transistor (Q2) DEC 2219

15-01881-00

HON
- O

00O NO

*Board, Etched Circuit

(ETCH REV C)

*Resistor (R1, R4) 330 Ohm 1/4W 5%

13-00295-00

*Resistor (R2, R5) 3.9K 1/4W 5%

13-00444-00

IPB-RP0O4

*Resistor (R3) 10K 1/4W 5%

13-00479-00

*Socket, Relay PC

12-09359-01

*Washer, Flat Nylon

90-06707-00

USED ON

CODE

REF|
NO .

dlilgliltall

PARTS LIST

RP04-05

Figure 5.

Power Harness Assembly

IPB-RPO4

I
|

FIG.
&

| ITEM

C\
e

NO. |

DEC

DESCRIPTION

PART NO.|

POWER HARNESS ASSEMBLY

70-09731
00001

|USED ON
copE

70-09731-00

*Connector (P1, P6, P7) (Pin Housing) Mate-N-Lok 15 Pin

12-09351-15

*Connector (P2, P11) (Pin Housing) Mate-N-Lok 6 Pin

*Connector (P3, P5) (Pin Housing) Mate-N-Lok 4 Pin

12-09351-06
12-09351-04

*Connector (P10) (Socket Housing) Mate-N-Lok 8 Pin
*Connector (J8) (Socket Housing) Mate-N-Lok 6 Pin

*Connector (J12, J13) (Socket Housing) Mate-N-Lok 4 Pin

12-09340-01

12-09350-06
12-09350-04

*Connector (E1) Solderless

90-07926-00

*Connector (E3, E4, TB1-1) Solderless

90-07930-00
90-07928-00

*Connector (TB1-2) Solderless

*Terminal, Fastab

12-10820-02

*Housing (B1) Fastab Socket

12-10820-01

*Terminal, Pin Contact

12-09378-00

*Terminal, Socket Contact

12-09379-00

*Terminal, Pin Contact

12-09378-03

*Cable Tie

90-07880-00

90-07033-00

*Cable Tie, Screw Down

*Terminal, Socket Contact

12-09379-07

*Terminal, Pin Contact

12-09378-10

*Cable Tie

90-07032-00

IPB-RP0O4

ECO
CUT-IN

A\N |

MODULES LISTED/
SEE
ON PAGE 20

RP04-06

Figure 6.

Card Nest and Cable Assembly

IPB-RP0O4

FIG.

ECO

DEC

ITEM

PART NO.

DESCRIPTION
CARD NEST and CABLE ASSEMBLY (Single Port)

CUT-IN

70-09732

00000

70-09732-01

RP0O4

70-09732-02

00034

USED ON
CODE

(deleted)
CARD NEST and CABLE ASSEMBLY (Dual Port)

(deleted)

*CARD NEST ASSEMBLY

70-09660-00

*Card Nest Status Sticker
*Sticker, Dual Control Information Cover

36-11703-00

74-11811-00
A,B

©oo~NOG
b

(Located Inside Door Assembly Item 4)

*DOOR ASSEMBLY

74-11601-00

*Fastener, 1/4 Turn

90-08342-00

*Retainer

90-08200-00

*HARNESS, Single Port (NFR)

70-09807-00

*HARNESS, Dual Port (NFR)

70-09808-00

*HARNESS, MDLI Cable (NFR)

70-09806-00

Modules

IPB-RP0O4

tSeek and Search Control Logic

M7772

tSynchronous Logic

M7773

tRegister Logic

M7774

tDual Port Logic

M7775

TError Correction

M7776

tMin Device Level Interface

M7777

tMin Device Level Interface

M7778

tDrive Transceiver

M5903

dlifgliltall

PARTS LIST

RP04-06
A

Figure 6A.

Card Nest and Cable Assembly

IPB-RP04

ECO

FIG.
&

DEC

PART NO.

DESCRIPTION

USED ON

00004

CODE

70-12061-00

RPO4

70-12061-01

00034

*CARD NEST ASSEMBLY

70-12062-00

CARD NEST and CABLE ASSEMBLY (Single Port) (added)
CARD NEST and CABLE ASSEMBLY (Dual Port) (added)

*Card Nest Status Sticker

74-15193-00

6A—

CUT-IN
70-12060

*Sticker, Dual Control Information Cover

36-11703-00

A,B

*DOOR ASSEMBLY

*Fastener, 1/4 Turn

*Retainer

90-08200-00

oo N

*HARNESS, Single Port (NFR)
*HARNESS, Dual Port (NFR)

70-09807-00

(Located Inside Door Assembly Item 4)

*HARNESS, MDLI Cable (NFR)

70-12064-00

74-11601-00

90-08342-00

70-09808-00

Modules

IPB-RPO4

tSeek and Search Control Logic

M7786

tSynchronous Logic

M7773

TRegister Logic

M7774

tinterface Control

M7787

tError Correction

M7776

TInterface Receiver

M7789

Tinterface Transmitter

M7788

tDrive Transceiver

M5903

C,D

TITTTTTT

PARTS LIST

IIFAINIINS

RP04-07

Figure 7.

Card Nest Assembly

IPB-RPO4

ECO

FIG.
&

DEC
DESCRIPTION

PART NO.

CARD NEST ASSEMBLY (deleted)

70-09660-00

CUT-IN

70-09660
00000
RP0O4

*CHASSIS ASSEMBLY

70-09730-00

90-08485-00

**Retainer
*Fan, 115 Vac 115 CFM

12-09403-02

*Screw, Phl Pan Hd No. 6-32 x .62

90-06025-01

*Washer, Ext Tooth No. 6

90-07649-00

*Clip, Fan Mounting

90-09165-00

o
ed

12-11100-00

*Card Guide, Right Hand

12-11099-00

*Screw, Phl Pan Hd (Self Tapping) No. 6-32 x 1/2
*Bracket, Mounting Back Plane

90-08181-01
70-09623-00
74-11584-00

*Screw, Phl Pan Hd No. 8-32 x .38
*Washer, Lock Int Tooth No. 8

90-06037-01
90-06634-00

*Screw, Phl Pan Hd No. 8-32 x .38

90-06418-01
90-08196-00

*WIRED ASSEMBLY

*Sticker, Back Plane

74-11881-00

*Grommet, Strip (26 IN)

90-08209-00

90-07594-00

N
N

74-11602-00

*Nut, Kep No. 8-32

90-06563-00

*Washer, Nylon No. 6 (added)

90-06707-00

Gl B

*Adhesive
*Retainer

WN =0

*Clip on Receptacle, Southco

ed ol

*Card Guide, Left Hand

ed emd ed

90-06560-00
90-06653-00

*Nut, Kep No. 6-32
*Washer, Flat No. 6

0O ~NOTOTDWN=0O
O O

70-09663-00

90-09615-00

**Screw, Wing Head

Ol H

*PLENUM ASSEMBLY

~NO

00034

IPB-RPO4

00002

|USED ON
CODE

dlilgliltiall

PARTS LIST

RP04-07A

Figure 7A.

Card Nest Assembly

IPB-RP0O4

FIG.

ECO

DEC

PART NO.

DESCRIPTION

C UT-IN
70- 12062

00001
S
ST
R

71A—

CARD NEST ASSEMBLY (added)

70-12062-00

RP04

*Chassis Assembly
*PLENUM ASSEMBLY

70-12063-00
70-09663-00

**Screw, Wing Head

90-09615-00

**Retainer

90-08485-00

*Fan, 115 Vac 115 CFM

12-09403-02

*Screw, Phl Pan Hd No. 6-32 x .62

90-06025-01

*Washer, Ext Tooth No. 6

90-07649-00

*Clip, Fan Mounting

90-09165-00
90-06560-00

90-06653-00

*Card Guide, Left Hand

12-11100-00

omd cmd emd

*Nut, Kep No. 6-32

*Washer, Flat No. 6

*Card Guide, Right Hand

12-11099-00

ond oed ood eomd od

00034

*Screw, Phl Pan Hd (Self Tapping) No. 6-32 x 1/2

90-08181-01

90-06037-01

*Washer, Lock Int Tooth No. 8

90-06634-00

*Screw, Phl Pan Hd No. 8-32 x .38

90-06418-01

*Clip on Receptacle, Southco

90-08196-00

*Sticker, Back Plane
*Grommet, Strip (26 IN)
*Adhesive
*Support, Cable
*Nut, Kep No. 8-32

*Screw, Phl Pan Hd No. 8-32 x .38

74-11584-00

70-09623-00

*Bracket, Mounting Back Plane

*WIRED ASSEMBLY

IPB-RP0O4

74-11881-00

90-08209-00
90-07594-00
74-15191-00

90-06563-00

USED ON
CODE

RP04-08

Figure 8.

Power Supply Assembly

IPB-RPO4

ECO

IPB-RP0O4

WN-=
0
G

N
i G

00 NOOTHL
WN =

DESCRIPTION

DEC

CUT-IN
H764

USED ON

PART NO.

00002

CODE

H764 POWER SUPPLY ASSEMBLY

H764-00

*CHASSIS ASSEMBLY

74-11356-00

*Fan,

115V 115 CFM

12-09403-01

*Clip, Fan Mounting

90-09165-00

*Screw, Thd Form 6-32 x .62

90-09587-01

*Washer, Lock Split No. 6

90-07801-00

*Washer, Flat No. 6 (deleted)
*POWER SUPPLY HARNESS

90-06653-00

*Washer, Fiber Adhesive Backing

90-08848-00

00007

70-09614-00

(See 54-09728 IPB)

*REGULATOR BOARD ASSEMBLY

54-09728-00

*Washer, Insulated Flat No. 6

90-06693-00

*Insulator (deleted)

74-12615-00

*Cover
*Plug, Button

74-11367-00
90-07060-00

*Screw, Nylon No. 6 (added)

90-09055-05

00003

*Washer, Internal Tooth Lock No. 6 (added)

90-06633-00

00007

00003

dlilgliltiall

J7]

[

|AIP2

PARTS LIST

RP04-09

Figure 9.

Power Supply Harness Assembly

iPB-RP0O4

FIG.

ECO

DEC

| ITEM

PART NO.

DESCRIPTION
H764 POWER SUPPLY HARNESS ASSY

70-09614-00

*Connector (A1P1, A2P1) (Socket Housing)

12-09350-03

CUT-IN

70-09614

00001

Mate-N-Lok 3 Pin

*Connector (A1P2, A2P2) (Pin Housing)

12-09351-09

Mate-N-Lok 9 Pin

*Connector (A1P3, A2P3) (Socket Housing)

12-10821-02

(&)
I =

Mate-N-Lok 2 Pin

*Terminal, Fastab

12-10820-02

*Housing (B1) Fastab Socket

12-10820-01

*Connector (J5) (Socket Housing)

12-09350-04

Mate-N-Lok 4 Pin

*Connector (J6, J7) (Socket Housing)

12-09350-15

Mate-N-Lok 15 Pin

*Connector (U4) (Socket Housing)

12-09350-09

Mate-N-Lok 9 Pin

*Terminal, Socket Contact

12-09379-00

*Terminal, Pin Contact

12-09378-00

*Cable Tie

90-07880-00

*Cable Tie, Screw Down

90-07033-00

*Terminal, Socket Contact (added)

12-09379-07

IPB-RP0O4

00003

USED ON
CODE

FIG.

| ITEM
|

DEC

NO.

DESCRIPTION

PART NO.

POWER CABLE ASSEMBLY 50 Hz (deleted)

70-06464-01

POWER CABLE ASSEMBLY 50 Hz (added)

70-06464-03

POWER CABLE ASSEMBLY 60 Hz (deleted)

70-06464-02

POWER CABLE ASSEMBLY 60 Hz (added)

70-06464-04

ECO

CUT-IN

70-06464
00002

00004

{|USED ON
CODE
B,D

B,D

A,C

¥*Connector, (P1) Hubbel Twist-lock 60 Hz

12-11209-00

A,C

*Connector, (P1) Hubbel Twist-lock 50 Hz

12-09010-00

B,D

*Terminal, Ring Tongue

90-07926-01

*Connector, (P2) Amphenol

12-09643-00

*Clamp (P2) Amphenol

12-09571-00

*Bushing, Rubber (added)

12-10776-06

00004

*Bushing, Rubber (added)

12-10776-07

00004

*Cable Tie (added)

90-07031-00

00005

RP0O4-10

Figure 10.

Power Cable Assembly

31/32

IPB-RP0O4

;

FIG.

ITEM
I

NO.

C1
DEC

11—

DESCRIPTION

Eco

CUT-IN

70-09491

PART NO.

POWER SEQUENCE CABLE ASSEMBLY

70-09491-01

12-09351-04

*Connector, {P1,P2) 4 Pin Mate-N-Lok

*Terminal, (P1,P2) Pin Contact

12-09378-03

*Cable, Multi-Conductor

91-07706-00

00001

|USEDON|
CODE

REF

FIG

NO.
1

DEC:

1
2

{

—ud

1
2

RP04-11

Figure 11.

Power Sequence Cable Assembly

33/34

IPB-RP0O4

ILLUSTRATED PARTS BREAKDOWN
COMMENT SHEET
Any and all comments and suggestions for correcting errors and/or additional information to improve this manual

will be reviewed and researched for possible use when this manual is revised and/or reprinted. Enter your comments
and suggestions in the form provided below and return to Technical Documentation.

MODEL

RP04

PUBLICATION NO.

DISK PACK DRIVE

FIGURE NO.

ITEM NO.

CHANGE FROM

CHANGE TO

FIGURE NO.

ITEM NO.

CHANGE FROM

CHANGE TO

FIGURE NO.

ITEM NO.

CHANGE FROM

CHANGE TO

EK-ORP04-1P-002

ITEM NO.

ADDITIONAL COMMENT(S)

Please describe your position.
Name

Organization

Street

Department

City

State

Zip or Country

o e o

e e o e e e e

Do Not Tear — Fold Here and Staple - — — =

e e e

e e

e e e

No Postage
Necessary

if Mailed in the

United States

BUSINESS REPLY MAIL
FIRST CLASS

PERMIT NO.33

MAYNARD, MA.

'POSTAGE WILL BE PAID BY ADDRESSEE
Digital Equipment Corporation

Communications Development and Publishing Services
129 Parker Street, PK3-1/T12
Maynard, MA 01754