Digital PDFs

XX-XXXXX-XX

2000

25 pages

Original

0.2MB

Document:	Lost document 26461
Order Number:	XX-XXXXX-XX
Revision:	000
Pages:	25
Original Filename:	http://sup.xenya.si/sup/info/compaq/Alpha_servers/GS80/10697_na.pdf

OCR Text

QUICKSPECS

Compaq AlphaServer GS80

Overview
AT A GLANCE
AlphaServer GS80 systems
include:
• One 731-MHz CPU module;
up to eight 731-MHz Alpha
21264 processors are
supported
• Optional Compaq Capacity on
Demand (CCoD) SMP
processors for non-disruptive
performance growth
• 4-MB on-board cache per
processor
• Advanced crossbar switch
with 6.4-GB/s of memory
bandwidth per building block;
up to 12.8-GB/s memory
bandwidth per system
• Up to 64-GB memory
• Up to 16 64-bit PCI channels
with 3.2-GB/s aggregate I/O
bandwidth
• PCI I/O master drawer with
12 configurable PCI slots
• PCI dual 10/100 Mbit Dual
Ethernet adapter
• 9.1-GB SCSI-3 disk drive
• 600-MB CD-ROM drive
• Enhanced reliability with
ECC-protected memory,
processor cache, and system
data paths
• Security of RAID storage and
online repair of I/O buses
• Optional redundant power
supplies, with N+1 power
option (hot-swappable
processors are available on
GS160 and GS320 models)
• Up to 56 64-bit PCI slots
supported
• Tru64 UNIX or OpenVMS
factory installed software
(FIS); optional high availability
support with Tru64 UNIX and
OpenVMS cluster solutions
• Product warranty, 1-year

hardware, on-site next business
day and 90-day software,
telephone support delivered by
Compaq Services

..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..

1.
2.
3.
4.

DA-10697-01-003 — 12.11.2000

Operator control panel
One optional PCI or StorageWorks drawer
Standard 14-slot PCI I/O Master Drawer
System drawers each with 1 QBB
(Model 4 includes 1 drawer with space reserved for
2nd drawer; Model 8 includes 2 drawers)
48-volt DC power shelves, 2 power supplies per
shelf (Model 4 includes 1 shelf; Model 8 includes 2
shelves)
AC input controller(s)

QUICKSPECS

Compaq AlphaServer GS80

Standard Features
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..

Processor
Up to 8 Alpha 21264 6/731-MHz CPUs (one CPU per module)
Cache Memory
64K I and D caches on-chip; 4-MB ECC on-board cache per CPU
Architecture
AlphaServer GS80 utilizes a modular crossbar switch structure
Quad building blocks (QBBs) support up to four CPUs, four memory modules, and eight PCI buses on a 6.4-GB/s
non-blocking backplane switch
Up to two QBBs are connected by a direct internal interconnect with 3.2-GB/s of bandwidth
CPUs, Memory, and I/O Slots
Base systems contain one CPU and one master PCI I/O drawer
Model 4
Model 8
Maximum CPUs supported
4
8
Maximum memory supported
32 GB (4 modules)
64 GB (8 modules)
Maximum PCI slots supported
28
56
Note: Model 4 and Model 8 base systems include 12 configurable PCI slots.
System capacities shown are available with both Tru64 UNIX and OpenVMS operating systems.
Network and I/O Controllers
Ethernet
Console ports

PCI Dual 10/100 Mbit Fast Ethernet adapter (3X-DE602-AA) included in master PCI shelf box;
additional Ethernet adapters available as options
One bi-directional parallel port with 25-pin D-subminiature connector
Two EIA-232 full duplex asynchronous modem control serial ports, 9-pin D-subminiature
connectors
One PS/2 compatible keyboard port; one PS/2 compatible mouse port

Boot/Diagnostic Devices
Boot/diagnostic devices included in master PCI shelf box
CD-ROM
One 5.25” half height 600-MB CD-ROM drive
Hard Drives
One 9.1-GB 7200 rpm SCSI-3 disk drive
Internal Disk Expansion
Total Internal
Drive Bays

Up to seven 36-GB drives (252 GB) can be mounted in one optional storage shelf in the system
cabinet

Power Supplies
Single-phase power subsystem with power cords; optional redundant 48 Vdc hot swap power supplies
OS Support
Tru64 UNIX systems include pre-installed software, Base license, Unlimited User license, Server Extension license,
Open Source Internet Solutions, and iPlanet Web Server Enterprise Edition 4.0
OpenVMS systems include pre-installed software, Base license and Enterprise Integration Package V3.0
Support for up to two total instances of Tru64 UNIX or OpenVMS, or a combination of both, in hardware partitions on
a single GS80 Model 8 hardware platform
Service and Support
Protected by Compaq Services including a 1-year on-site hardware warranty. Software warranty is 90-day telephone
advisory. Training, consulting, network integration, software support, comprehensive system maintenance and
guaranteed uptime services are also available for customers requiring higher levels of service and support.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Systems/Options
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..

Step 1 − Assess Application Requirements
• Selection of system components must be made in the context of total application requirements. Although the
configuration of system components must be done in steps (for example, base packages, CPUs, memories, etc.),
these steps cannot be done in isolation.
• The order in which requirements are assessed is also important, since one requirement may impact others. Before
proceeding, it would be useful to assess the total application requirements in the following order:
• What level of availability is required?
- If no single points of failure are allowed, then the solution should be configured as a cluster.
- If access to specific devices must be assured, consider redundant adapters, RAID, N+1 power, redundant
PCI drawers, and redundant consoles.
- If software redundancy is required, consider clusters and/or hardware partitioning. The choice of hardware
partitioning will generate a need for multiple master PCI drawers, multiple consoles, and I/O adapters.
• Is hardware partitioning required for optimal system management?
• What overall capacities are required in terms of processor performance, memory capacity, and disk storage?
• What are the near-term system expansion needs?
• How will system cabinets be physically arranged? This will determine if expansion cabinets are required and what
cable lengths are required.
Note: Most configuration steps require that these data be considered in whole or in part. Be sure to execute each step
in the context of the total application requirements.
System Ordering Requirements:
Certain system components or services are either required for normal operation or are recommended for best system
performance and/or operation. This document uses the following definitions to specify these options:
• Mandatory purchase: The system cannot function without this option or service − the option or service must be
ordered with the system.
• Required to function: This option or service is needed to support a working system − the option or service must
be ordered with the system or be available onsite.
• Recommended: System performance or function will be enhanced if this option or service is ordered.
Step 2 − Select base system
AlphaServer GS80 systems require selection of the following items:
Mandatory Purchases:
• Base system with operating system license (either OpenVMS or Tru64 UNIX) and one 731-MHz CPU module
• Minimum of one memory module
Required Options and Services:
• Software media and documentation for first system onsite
• Installation and/or startup services
• System management console or device and software with equivalent functionality
Recommended Services:
• Priority Service Plan
• VIS Services
Note: The base system package should be selected in the context of the number of hardware partitions required, the
total capacity required, and the anticipated near-term system growth.
AlphaServer GS80 Base Systems
Model
OS
QBBs
Included

Total CPUs
Supported

Geography

Input Power

Order No.

Model 4
Model 4

Tru64 UNIX
Tru64 UNIX

1
1

4
4

US/Canada
Europe

120V
220-240V

DA-A80AA-AC
DA-A80AA-AD

Model 4
Model 4

Tru64 UNIX
OpenVMS

1
1

4
4

Japan
US/Canada

200-240V
120V

DA-A80AA-AE
DY-A80AA-AC

Model 4
Model 4

OpenVMS
OpenVMS

1
1

4
4

Europe
Japan

220-240V
200-240V

DY-A80AA-AD
DY-A80AA-AE

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 2 − Select base system (continued)
AlphaServer GS80 Base Systems (continued)
Model 8
Tru64 UNIX
2
Model 8
Tru64 UNIX
2

8
8

US/Canada
Europe

120V
220-240V

DA-A80BA-AC
DA-A80BA-AD

Model 8
Model 8

Tru64 UNIX
OpenVMS

2
2

8
8

Japan
US/Canada

200-240V
120V

DA-A80BA-AE
DY-A80BA-AC

Model 8
Model 8

OpenVMS
OpenVMS

2
2

8
8

Europe
Japan

220-240V
200-240V

DY-A80BA-AD
DY-A80BA-AE

Step 3 − Additional SMP CPUs
• AlphaServer GS80 base systems contain one CPU module. Additional SMP CPUs may be added, up to the limits
shown in above table. SMP CPU options include an operating system SMP license.
GS80 SMP upgrade CPU, 6/731-MHz with 4-MB on-board cache, Tru64 UNIX
3X-KN8AA-AB
GS80 SMP upgrade CPU, 6/731-MHz with 4-MB on-board cache, OpenVMS
3X-KN8AA-AC
Compaq Capacity on Demand (CCoD) CPUs

AlphaServer GS80 base systems can be configured with optional Compaq Capacity on Demand (CCoD) CPUs
for non-disruptive future capacity expansion. The CPUs will be field installed as part of the system installation.
The total number of CPUs – base CPU, SMP CPUs, and CCoD CPUs – must adhere to the limits shown in the
above table. Refer to the Compaq Capacity on Demand Program described in the “Upgrades” section.
GS80 CCoD SMP CPU, includes one 6/731-MHz CPU module with 4-MB on-board cache, Tru64
3X-KN8CA-AB
UNIX SMP license, and CCoD program license
GS80 CCoD SMP CPU, includes one 6/731-MHz CPU module with 4-MB on-board cache,
3X-KN8CA-AC
OpenVMS SMP license, and CCoD program license
Step 4 − Select Memory Options
• Memory options are engineered specifically for use with this series and include additional components, which are
integral to the system architecture.
• Memory options consist of a series of base modules that contain one memory array. A second array (called
"upgrades" in the table) may be added to a base module in the factory or in the field.
1-GB GS80/160/320 base memory module
3X-MS8AA-BB
1-GB GS80/160/320 memory DIMM upgrade
3X-MS8AA-BU
2-GB GS80/160/320 base memory module
3X-MS8AA-CB
2-GB GS80/160/320 memory DIMM upgrade
4-GB GS80/160/320 base memory module
4-GB GS80/160/320 memory DIMM upgrade

DA-10697-01-003 — 12.11.2000

3X-MS8AA-CU
3X-MS8AA-DB
3X-MS8AA-DU

QUICKSPECS

Compaq AlphaServer GS80

Options
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..

Step 4 − Select Memory Options (continued)
Memory Configuration Guidelines
Memory options should be selected in the context of the application's sensitivity to memory bandwidth and memory
capacity, and the number of hardware partitions. This will determine the number of memory base modules and
upgrades needed. The total capacity required will determine the size of the arrays to be chosen.
The configuration of memory may influence the performance of applications, and there are numerous ways to configure
the choices of memory base modules and upgrade DIMMs. The following general guidelines can lead to several
configuration choices. Application-specific guidelines will help narrow down the choices.
• Configuring for capacity: The highest capacity is achieved when the 3X-MS8AA-DB/DU combination is used.
• Configuring for performance: Interleaved operations reduce the average latency and increase the memory
throughput over non-interleaved operations. Each memory base module is capable of 4-way interleaving with one
array (no upgrades added) or 8-way interleaving with two arrays (base module plus one upgrade). A QBB
configured with eight arrays (four base modules plus four array upgrades) provides 32-way interleaving and has
the maximum potential memory bandwidth. Refer to “Memory Applications Examples” below to determine which
applications gain the most benefit from this bandwidth.
• Memory modules should be configured in powers of 2: That is, 0, 1, 2, or 4 base modules in a QBB. Upgrades
should also be installed in powers of 2: 0, 1, 2, or 4 base modules in a QBB.
• Although mixed-capacity memory modules may be configured, the highest bandwidth is achieved when a QBB is
populated with eight identical arrays: four base modules and four upgrades. The next-highest bandwidth would be
four base modules (four arrays).
• If it is not possible to match the capacities of all the arrays, the next best choice is to configure pairs of identical
base modules, or base module/upgrade combinations. For example, a configuration of two 2-GB base modules
(3X-MS8AA-CB), each with a 1-GB upgrade (3X-MS8AA-BU) is a better choice than a configuration of three
2-GB modules (3X-MS8AA-CB).
Memory Application Examples
Configuring memory is a compromise between cost, total memory capacity, and memory bandwidth requirements. The
behavior of the application must be used to define the most-desired configuration. Some applications are sensitive to
memory capacity, some are sensitive to memory bandwidth, some are sensitive to neither. If actual application
measurements are not available, the following may be used as guidelines:
• Large memory (VLM) applications, in which large amounts of memory can substantially reduce I/O, may be
optimized for total memory capacity and future capacity growth. In VLM applications, the right balance might be
one memory base module, with upgrade, for every two CPUs. This would result in one memory array per CPU.
• Typical commercial applications, such as transaction processing (OLTP) and multi-user timesharing, usually operate
efficiently from cache and may not be materially affected by memory bandwidth. Memory configuration is a
balance between memory bandwidth and future capacity growth. It is advisable to match the number of arrays to
the number of CPUs.
• Data mining can benefit from additional memory bandwidth. It is best to match the number of memory base modules
to the number of CPUs.
• The most demanding high-performance technical applications (HPTC) achieve a performance level that is directly
proportional to memory bandwidth. In these cases, configure one memory base module, with upgrade, per CPU.
This results in two memory arrays per CPU.
The following table represents how 8 GB could be configured in a 4-CPU QBB in each of the four referenced
applications. The numbers under each application represent how many of each memory option should be ordered.
Memory Configuration Examples – Configuring a QBB with a total of 8 GB for specific applications
Application
1-GB base module

(3X-MS8AA-BB)

VLM
-

OLTP, Timesharing Data Mining
-

HPTC
4

1-GB upgrade

(3X-MS8AA-BU)

2-GB base module

(3X-MS8AA-CB)

2-GB upgrade

(3X-MS8AA-CU)

N/R

The following additional configuration options utilizing the 4-GB base module are available:
4-GB base module

(3X-MS8AA-DB)

4-GB upgrade

(3X-MS8AA-DU)

N/R = Not recommended − For these applications, configure either four or eight like-sized memory options rather than
one or two.
DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 5 − Evaluate Configuration Requirements to Support Optional Partitioning
Configuration Requirements for Partitions
•
Configuring partitions requires some attention to detail with respect to minimum requirements for option selection,
population, and option placement.
• A single GS80 Model 8 can be divided into two logical hardware partitions, each running an instance of Tru64 UNIX
V4.0G, Tru64 UNIX V5.1, or an instance of OpenVMS V7.2-1H1. Each partition is allocated its own dedicated
“shared-nothing” set of hardware resources: QBB(s), CPU module(s), memory module(s), and I/O.
• Each hardware partition is viewed as a unique node, from a system point-of-view, with its own instance of Tru64
UNIX or OpenVMS operating system and application software, independent system console, and error log.
• In the AlphaServer GS80 each of the two hardware partitions is defined by a single QBB.
• One system management console (3X-DS8BA-xx) and one console hub (3X-DS8AA-AA) required per system.
• Supported option rules apply for maximum configurations of each GS80 system partition. Care must exercised to
ensure that any planned reconfiguration of hardware partitions will not violate option support rules.
Minimum Hardware Required per GS80 Hardware Partition
Each hardware partition requires one QBB and that QBB must be configured with the minimum hardware listed below.
Each QBB can be configured with additional hardware once this minimum requirement is met.
•
One Alpha 21264 6/731-MHz CPU module
•
One 3X-MS8AA-BB/CB/DB memory module (1 GB, 2 GB, 4 GB)
•
One 3X-KFWHA-BA system I/O module and one 3X-DWWPA-AA master PCI drawer. Depending upon the
configuration, this may require the use of an H9A20-AA/AB/AC expansion cabinet.
•
AlphaServer GS80 systems are normally configured according to standard module placement rules, and are
shipped with one copy of the operating system installed at the factory (Tru64 UNIX V4.0G, Tru64 UNIX V5.1, or
OpenVMS V7.2-1H1). However, systems with hardware partitions offer hardware and software configuration
flexibility. Factory Integration Services (VIS) are recommended to enable custom module configuration and factory
installation of multiple copies of the operating system on hardware partitioned systems.
Optimizing System Resources
The following configuration guidelines can be used to improve performance in systems or in each partition of a
hardware-partitioned system.
•
Balance the resources in the system (or hardware partition) based upon the available backplane space and the
proposed option populations:
- Sparsely configured systems, those that are using half or less than half of their available capacity for CPUs,
memory, and PCI drawers, should be configured with the options concentrated in as few QBBs as possible.
For example, a GS80 Model 8 with four CPUs, four memory modules, and two PCI drawers would usually be
configured in the first QBB. The first QBB would be "active" and the second QBB would be available for
expansion.
- Densely populated systems, those that are using more than half of their available capacity for CPUs, memory,
and PCI drawers, should be configured with the options spread out across both QBBs.
•
Configure active QBBs symmetrically, each with CPUs, memory, and PCI drawers.
•
Configure the I/O adapters so that each active QBB has direct access to the most frequently accessed data.
System Software Required for GS80 Hardware Partition Support
Software Licensing for Hardware Partitions
• Base systems include operating system license (Tru64 UNIX or OpenVMS) that licenses up to two hardware
partitions
User and capacity-based licensing is unaffected by hardware partitions. Examples:
• If a product is licensed for 200 concurrent users, these users can be split among the partitions, but cannot exceed
200 total users.
• If users have a departmental (license code "G") capacity license for a product, that license can be loaded into the
license databases on each of the hardware partitions.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 5 − Evaluate Configuration Requirements to Support Optional Partitioning (continued)
Licensing Partitioned GS80 Systems for Both OpenVMS and Tru64 UNIX
• If the system requires both OpenVMS and Tru64 UNIX operating systems be licensed, one operating system license
is included in the base system and the second is added as a line item. The second operating system license
upgrade, which includes the license for only one CPU, would be added to the order using the following part
numbers. Order appropriate media and documentation kits from Step 13.
OpenVMS software upgrade for GS80
QB-63PAG-AG
Tru64 UNIX software upgrade for GS80
QB-595AM-AA
• Only those SMP processors intended for use with the second operating system must be similarly licensed. Use the
following license-only part numbers to add an SMP license for any CPUs intended for use with the second
operating system:
OpenVMS Alpha SMP license for GS80
QL-MT1A9-6Q
Tru64 UNIX Alpha SMP license for GS80
QL-MT4A9-6Q
• The order of licensing is not important, but the following examples are similarly constructed for clarity: The
configuration starts with a Tru64 UNIX base system part number and the addition of OpenVMS licenses.
Example 1: 8-CPU GS80 system in which all processors are licensed for both OpenVMS and Tru64 UNIX:
• Base system order would include a DA-A80BA-Ax and seven 3X-KN8AA-AB SMP upgrade CPUs
• Add one QB-63PAG-AG OpenVMS software upgrade and seven QL-MT1A9-6Q OpenVMS Alpha SMP licenses
Example 2: 8-CPU GS80 system in which all the processors are licensed for Tru64 UNIX and four processors are also
licensed for OpenVMS:
• Base system order would include a DA-A80AA-Ax and seven 3X-KN8AA-AB SMP upgrade CPUs
• Add one QB-63PAG-AG OpenVMS software upgrade and three QL-MT1A9-6Q OpenVMS Alpha SMP licenses
• User and capacity-based licenses would be added for the second operating system environment as though it were a
standalone system.
Step 6 − Configure Packaging Options
Step 6a − Redundant (N+1) Power Supplies
• Power supplies included with Model 4 and Model 8 systems can support all combinations of CPUs, memory, and I/O
that can be configured within the system boxes.
• Additional 48V power regulators can be ordered to provide N+1 power redundancy.
• For Model 4 systems, order one power supply to achieve N+1 capability; for Model 8 systems, order two power
supplies to achieve N+1 capability.
1000W 48V power supply
H7510-AA
Step 6b − Internal System Expansion
• GS80 Model 4 and Model 8 systems can support one additional PCI drawer (master or expansion) or one
StorageWorks BA36R shelf in the system cabinet.
Internal StorageWorks Expansion
• System cabinet provides space for one forward facing BA36R-RC/RD StorageWorks shelf, which can hold a
maximum of two 5.25” devices and one 3.5” device or seven 3.5” devices
• Each UltraSCSI StorageWorks shelf requires a SCSI controller and a SCSI cable to connect controller to shelf
• StorageWorks drives are listed in a subsequent section
UltraSCSI single-channel SE StorageWorks shelf includes 16-bit I/O personality module
BA36R-RC
(DS-BA35X-FA), 180W ac power supply, dc fans, and RETMA rackmounting hardware; supports
16-bit UltraSCSI devices and some 8-bit narrow SCSI devices depending on compliance with
minimum revision levels
UltraSCSI dual-channel SE StorageWorks shelf, includes 16-bit I/O personality module
BA36R-RD
(DSBA35X-FB), 180W ac power supply, dc fans, and RETMA rackmounting hardware; supports
16-bit UltraSCSI devices and some 8-bit narrow SCSI devices depending on compliance with
minimum revision levels
UltraSCSI StorageWorks Differential personality card; installs in BA36R-RC and is cabled to the
DS-BA35X-DA
KZPBA-CB; field installed only

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 6 − Configure Packaging Options (continued)
Power Option for BA36R Shelves
• Additional power supply provides N+1 power for StorageWorks shelves; power supply uses 3.5” slot in
StorageWorks shelf reducing total number of devices supported by one
• StorageWorks drives are listed in a subsequent section
180W redundant power supply for StorageWorks shelf; includes power cord
CK-BA35X-HH
System I/O Expansion
• Model 4 systems support up to two PCI drawers; Model 8 systems support up to four PCI drawers. One PCI drawer
included in Model 4 and Model 8 base systems.
• Model 4 and Model 8 system cabinets provide space for one additional PCI drawer or one internal storage shelf.
• Additional PCI drawers and storage shelves can be configured in H9A20-AA/AB/AC I/O expansion cabinet,
described in a subsequent section.
• All PCI drawers contain 14 PCI slots configured into four PCI buses; two of the buses have four slots each, the other
two buses have three slots each.
• There are two types of PCI drawers: expansion drawers and master drawers. Base system configurations include
one PCI master drawer with 12 configurable PCI slots.
• Expansion drawers contain 14 PCI slots and N+1 redundant power system; expansion drawers are used for most
PCI expansion applications.
• Master drawers contain 13 configurable PCI slots, N+1 redundant power system, plus the console ports and storage
devices required for use as a system console. (These devices are listed on page 2. Note that the Fast Ethernet
adapter is not included in optional master PCI drawers.) Master drawers have two applications:
- As redundant console sub-systems
- As consoles for individual partitions in hardware partitioned systems
• PCI drawers are connected to a QBB utilizing a 3X-KFWHA-BA system I/O module that connects to the PCI drawer
using two BN39B cables.
PCI Drawer Expansion
• PCI drawers are connected to a QBB utilizing a 3X-KFWHA-BA system I/O module that connects to the PCI drawer
using two BN39B cables. One 3X-KFWHA-BA and cable pair are mandatory per PCI drawer.
• Maximum one additional drawer in the system power cabinet
Master PCI shelf mount box for system and I/O expansion cabinets with standard I/O PCI module and 3X-DWWPA-AA
13 PCI expansion slots. (The 1st master comes standard with all systems and includes a standard
dual Ethernet network card and the system module and cable pair for connection to the QBB).
Expansion PCI shelf mount box for system and I/O expansion cabinets with 14 PCI expansion slots
3X-DWWPA-BA
System I/O module for connecting to master or expansion PCI shelves
3X-KFWHA-BA
I/O module cable for connection between I/O module and master or expansion PCI shelves is
BN39B-04
mounted in system cabinet; two are mandatory per system I/O module
Step 6c − External Expansion Cabinets
• Additional PCI drawers and storage shelves can be installed in an optional H9A20-AA/AB/AC expansion cabinet.
One H9A20-AA/AB/AC expansion cabinet is supported
• The H9A20-AA/AB/AC I/O expansion cabinet can be configured to hold all disk BA36R StorageWorks shelves or
combination of StorageWorks shelves and PCI drawers.
- If no PCI drawers are configured, cabinet supports up to eight BA36R StorageWorks shelves.
- If one PCI drawer is configured, cabinet supports up to five BA36R StorageWorks shelves.
- If two PCI drawers are configured, cabinet supports up to four BA36R StorageWorks shelves.
- If three PCI drawers are configured, cabinet supports up to two BA36R StorageWorks shelves.
I/O expansion cabinet for use with GS80 systems, includes two 120V single-phase power controllers
H9A20-AA
and cords for use in US and Canada —does not support dual AC input configurations
I/O expansion cabinet for use with GS80 systems, includes two 220-240V single-phase power
H9A20-AB
controllers and cords for use in Europe – supports dual AC input configurations
I/O expansion cabinet for use with GS80 systems, includes two 200-240V single-phase power
H9A20-AC
controllers and cords for use in US, Canada, and Japan – supports dual AC input configurations
• If large quantities of disks are required, the use of StorageWorks Storage Array cabinets and components is highly
recommended.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 6 − Configure Packaging Options (continued)
Step 6c − External Expansion Cabinets (continued)
• Systems installed in the US and Canada may use the H9A20-AA cabinet when 120V input power is required. In all
other cases, the H9A20-AC cabinet is preferred because of the ability to support dual AC input.
• H9A20-AA/AB/AC cabinets may be joined to GS80 system. PCI drawers placed in these cabinets require
7-m I/O cables.
• H9A20-AA/AB/AC cabinets may be placed up to 6 meters from the system cabinet. Multiple expander cabinets may
be connected to one another or placed separately. Each group of free-standing H9A20 cabinets requires an endpanel trim kit (CK-H9A20-AA).
• PCI drawers placed in remote cabinets require 10-m I/O cables.
End-panel trim kit for remote H9A20-AA/AB/AC cabinets
CK-H9A20-AA
I/O module cables for connection between I/O module and master or expansion PCI drawers
BN39B-07
mounted in H9A20-AA/AB/AC expansion cabinet adjacent to system; two cables (BN39B-07 or
BN39B-10) are mandatory per PCI drawer.
I/O module cables for connection between I/O module and master or expansion PCI drawers
BN39B-10
mounted in second expansion cabinet or in remote H9A20-AA/AB/AC expansion cabinets; two
cables (BN39B-07 or BN39B-10) are mandatory per PCI drawer.
Step 7 − Internal Storage
PCI UltraSCSI Controllers
• Tru64 UNIX V4.0G or Tru64 UNIX V5.1 can support more SCSI controllers per hardware partition. Support for these
controller quantities will be phased-in. Refer to the “Supported Options List” for specific rules.
• OpenVMS V7.2-1H1 or later supports 24 KZPBA-Cx SCSI controllers per system.
• Each master PCI drawer contains an embedded SCSI controller that must be included in the total count.
• For cluster configurations, use Y cable (BN39A-0G).
• Manufacturing may substitute correct cable lengths depending on configuration.
Note: "Per System" quantities apply to systems or to each hardware partition. The SCSI adapters included in the base
system or in 3x-DWWPA-AA master PCI drawers must be included in this calculation.
Maximum # Supported
Tru64 UNIX V4.0G/V5.1 OpenVMS V7.2-1H1
Per
Per Per PCI Per Per Per PCI
System QBB Drawer System QBB Drawer
26
26
13
26
26
13 DS-KGPSA-CA

PCI Fibre Channel adapter (uses one PCI slot); requires
Fibre Channel cable
Fibre Channel cable (BNGBX-xx)
xx=02, 05, 15, 30, 50 meters, y=1, 2, 3, 4, 5
PCI 1-port UltraSCSI single-ended host adapter (uses one
8
PCI slot)
PCI 1-port UltraSCSI differential host adapter (uses one
24
PCI slot); requires BN38C-xx cable.
VHDCI male-to-68-pin HD male UltraSCSI cable
xx=03, 05, 10, 20 meters (-03 recommended for internal
cabinet connections, -05, -10, -20 recommended for
connections between cabinets)

234457-B2
8

KZPBA-CA

KZPBA-CB

CI Adapters (OpenVMS only)
PCI CI adapter, maximum 26 per system or hardware partition (12 per QBB, 6 per PCI drawer); requires
two PCI slots
Computer interconnect cable set, connects CIPCA to star coupler; select length xx=10, 20, 45 meters

DA-10697-01-003 — 12.11.2000

BN38C-xx

CIPCA-BA
BNCIA-xx

QUICKSPECS

Compaq AlphaServer GS80

Step 7 − Internal Storage (continued)
External Storage Arrays
• ESA 12000 Storage Arrays and RAID Array 8000 (HSG80/HSZ80 product set) are supported on Tru64 UNIX and
OpenVMS systems.
• ESA 10000 Storage Arrays and RAID Array 7000 (HSZ70 product set) are supported on Tru64 UNIX and OpenVMS
systems.
• Modular Array 6000 Storage Arrays (HSG60 product set) are supported on Tru64 UNIX and OpenVMS systems.
• SW800 CI Storage Arrays (HSJ5x product set) are supported on OpenVMS systems.
• Complete ordering and configuring information is available at www.compaq.com/products/StorageWorks/ (Only
Tru64 UNIX and OpenVMS operating systems options are supported.)
Storage Array Controllers
The following controllers are used in StorageWorks array packaging:
HSZ70 RAID Array Controllers
• HSZ70 UltraSCSI RAID Array controllers for RA7000 and ESA10000 are supported under Tru64 UNIX V4.0G or
Tru64 UNIX V5.1 and OpenVMS V7.2-1H1.
• HSZ70 UltraSCSI RAID Controllers require QB-5SBAB-SA/SB for Tru64 UNIX or QB-5SBAC-SA/SB for OpenVMS.
Also required is 380566-B21/DS-HS35X-BC external cache.
• HSZ70 UltraSCSI Controllers require KZPBA-CB adapters and BN38C cables (and UltraSCSI hubs if used).
Note: For system integration of the following option, contact Compaq CustomSystems.
DS-HSZ70-AH UltraSCSI controller includes 64-MB cache expandable to 128 MB
116271-B21
HSZ80 RAID Controllers
• HSZ80 UltraSCSI RAID controllers for RA8000 and ESA12000 are supported under Tru64 UNIX V4.0G or Tru64
UNIX V5.1 and OpenVMS V7.2-1H1.
• HSZ80 UltraSCSI RAID controllers require platform kit 400569-001 for Tru64 UNIX or 400571-001 for OpenVMS.
PCMCIA software kit, 400566-001/QB-678AA-SA, also required for each controller.
• HSZ80 UltraSCSI controllers require KZPBA-CB adapters and BN38C cables (and UltraSCSI hubs if used).
Note: For system integration of the following options, contact Compaq CustomSystems.
DS-HSZ80-AH UltraSCSI controller, includes 64-MB cache expandable to128 MB
400564-B21
DS-HSZ80-AJ UltraSCSI controller, includes 256-MB cache expandable to 512 MB
400565-B21
HSG60 Fibre Channel Controllers
HSG60 Fibre Channel controllers for MA6000 and ESA12000 are supported under Tru64 UNIX V4.0G, Tru64 UNIX
V5.1, and OpenVMS V7.2-1H1.
HSG60 Fibre Channel controllers require ACS software kit, QB-6J4AB-SA for Tru64 UNIX or
QB-6J4AC-SA for OpenVMS.
HSG60 Fibre Channel controllers require KGPSA-CB or DS-KGPSA-CA Fibre Channel adapters, BNGBX cables, and
fiber hubs or switches (see Fiber Hubs, Switches and Components)
Note: For system integration of the following options, contact Compaq CustomSystems.
HSG60 Fibre Channel controller, includes 256-MB cache
174134-B21
256-MB cache upgrade for HSG60
380674-B21

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 7 − Internal Storage (continued)
HSG80 Fibre Channel Controllers
• HSG80 Fibre Channel controllers for RA8000 and ESA12000 are supported under Tru64 UNIX V4.0G or Tru64
UNIX V5.1 and OpenVMS V7.2-1H1.
• HSG80 Fibre Channel controllers require platform kit 380553-001/QB-65RAB-SA for Tru64 UNIX or 380555001/QB-65RAC-SA for OpenVMS. Software kit, 128697-B21 HSG80 ACS V8.4F or 128698-B21 V8.4P, also
required for each HSG80 ordered.
• HSG80 Fibre Channel controllers require KGPSA-CB or DS-KGPSA-CA Fibre Channel adapters, BNGBX cables,
and fiber hubs or switches (see Fiber Hubs, Switches and Components)
Note: For system integration of the following options, contact Compaq CustomSystems.
DS-HSG80-BH Fibre Channel controller, includes 64-MB cache expandable to 128 MB
380671-B21
DS-HSG80-BJ Fibre Channel controller, includes 256-MB cache expandable to 512 MB
380672-B21
64-MB cache upgrade for HSx80 (DS-HSDIM-AB)
380673-B21
256-MB cache upgrade for HSx80 (DS-HSDIM-AC)
380674-B21
HSJ5x CI Storage Array Controllers
• HSJ5x CI Storage Array controllers are supported under OpenVMS V7.2-1H1 with CIPCA-BA CI controllers;
QB-5C4AA-SA software kits required for each external cache (one for HSJ50, two for HSJ52, four for HSJ54).
• HSJ5x CI Storage Array controllers require star couplers (SC008-AB, -AC or -AD) with CIPCA-BA adapters and
BNCIA cables.
• Controllers require KZPBA or CIPCA SCSI adapters or controllers, as appropriate.
Note: For system integration of the following options, contact Compaq CustomSystems.
32-MB cache 6-channel CI array controller with cache battery
HSJ50-AF
64-MB cache 6-channel CI array controller with cache battery
HSJ50-AH
128-MB cache 6-channel CI array controller with cache battery
HSJ50-AJ
Dual 64-MB cache CI array controller with cache batteries
HSJ52-AF
Dual 128-MB cache CI array controller with cache batteries
HSJ52-AH
Dual 256-MB cache CI array controller with cache batteries
HSJ52-AJ
Quad 512-MB cache CI array controller with cache batteries
HSJ54-AJ
UltraSCSI Hubs
• UltraSCSI hubs are supported with KZPBA-CB PCI differential SCSI adapters.
UltraSCSI hub with three differential ports, no single-ended ports, consists of two host ports and one
storage port in 3.5″ SBB, UltraSCSI cables not included
UltraSCSI hub with five differential ports, no single ended ports, consists of four host ports and one
storage port in 5.25″ SBB, UltraSCSI cables not included
UltraSCSI hub with nine differential ports, no single ended ports, consists of eight host ports and one
storage port in 5.25″ SBB, UltraSCSI cables not included

DA-10697-01-003 — 12.11.2000

DS-DWZZH-03
DS-DWZZH-05
DS-DWZZH-09

QUICKSPECS

Compaq AlphaServer GS80

Step 7 − Internal Storage (continued)
Fibre Hubs, Switches, and Components
Note: For system integration of the following options, contact Compaq CustomSystems.
12-port fibre hub, S.W.
8-port fibre switch
16-port fibre switch, S.W. OP
8-port fibre switch
16-port fibre switch, S.W. OP
Long wave GBIC
Unmanaged FC 7-port hub
FC 7-port hub, International
FC 7-port hub, Japan
FC 7-port hub mount kit
Short wave optical GBIC
FC 3 GBIC connection kit
FC 2 GBIC connection kit

295573-B22
380591-B21
380578-B21
158222-B21
158223-B21
127508-B21
234453-001
234453-B31
234453-291
136127-B21
380561-B21
380579-B21
380596-B21

Storage Devices
36.4-GB 7,200 rpm 16-bit UltraSCSI disk drive SBB
36.4-GB 10,000 rpm 16-bit UltraSCSI disk drive SBB
18.2-GB 10,000 rpm 16-bit UltraSCSI disk drive SBB
18.2-GB 7,200 rpm 16-bit UltraSCSI disk drive SBB
9.1-GB 10,000 rpm 16-bit UltraSCSI disk drive SBB
9.1-GB 7,200 rpm 16-bit UltraSCSI disk drive SBB

DS-RZ1FB-VW
DS-RZ1FC-VW
DS-RZ1ED-VW
DS-RZ1EA-VW
DS-RZ1DD-VW
DS-RZ1DA-VW

Tape Devices
32/64-GB DAT tape loader in StorageWorks carrier
12/24-GB 4mm DAT SCSI tape drive in 3.5″ StorageWorks carrier
20/40-GB DLT SCSI tape drive in 5.25″ StorageWorks carrier
35/70-GB DLT SCSI tape drive in 5.25″ StorageWorks carrier

TLZ9L-VA
DS-TLZ10-VA
TZ88N-VA
DS-TZ89N-VW

Compatible Storage Devices
The following tape drives are compatible with the AlphaServer GS80:
• TZ88, TSZ07, TLZ09, TKZ62, TKZ63, TKZ90, TLZ9L, TL800, TL891, TL892, TL890, TL893, TL894, TL895, TL896,
DS-TLZ10-VA, TSZ20, TSZ08, DLT7000, AIT35, TZ89N

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 8 − Networks and Communications
• One Fast Ethernet adapter included in base systems. Connection of system to Ethernet requires twisted-pair cable.
PCI LAN Communications Controllers
• Requires 3X-DWWPA-AA /BA PCI shelf mount box
• Each adapter/controller uses one PCI slot
• A maximum of eight network adapters − 3X-DE602-AA, DEGPA-SA, 3X-DEFPA-xx − are supported per system or
hardware partition.
Note: "Per System" quantities apply to systems or to each hardware partition. The 3X-DE602-AA included in base
system must be included in these calculations.
Maximum # Supported
Tru64 UNIX

OpenVMS

Per
Per Per PCI Per
Per Per PCI
System QBB Drawer System QBB Drawer

10/100-Mbit Fast Ethernet Adapter
PCI Dual Base 10/100 Fast Ethernet adapter (338456-B21) 8
8
8
8
8
8
3X-DE602-AA
Single-port multi-mode fiber add-on daughter card
8
8
8
8
8
8
3X-DE602-FA
Category 5 cross-over cable for point-to-point, unshielded
BN24Q-xx
xx=01, 03, 04, 07, 0E for 1,3,4, 7, 0.5 meters
Category 5 cross-over cable for point-to-point, shielded
BN28Q-xx
xx=01, 03, 04, 07, 0E for 1,3,4, 7, 0.5 meters
Category 5 straight through for system to repeater or hub,
BN25G-xx
unshielded, xx=01, 03, 04, 07, 0E, 0B for 1,3,4, 7, 0.5,
0.2 meters
FDDI Controllers
PCI FDDIcontroller, fiber, single-attachment station
8
8
8
8
8
8
3X-DEFPA-AC
multimode fiber, requires BN34x SC type connecting
cable; maximum six DEFPA-AC/DC/UC/MC per system
PCI FDDIcontroller, fiber, dual-attachment station
8
8
8
8
8
8
3X-DEFPA-DC
multimode fiber, requires BN34x SC type connecting
cable; maximum six DEFPA-AC/DC/UC/MC per system
Multimode fiber optic duplex cable, SC connector-to-ST
BN34A-xx
connector, xx=01, 03, 10, 20, 30, 2E, 4E for 01, 03, 10,
20, 30, 2.5, 4.5 meters
Multimode fiber optic duplex cable, SC connector-to-SC
BN34B-xx
connector, xx=01, 03, 10, 20, 30, 2E, 4E for 01, 03, 10,
20, 30, 2.5, 4.5 meters
Multimode fiber optic duplex cable, SC connector-to-MIC
BN34D-xx
connector, xx=01, 03, 10 for 01, 03, 10 meters
PCI FDDIcontroller, copper, dual-attachment station UTP,
8
8
8
8
8
8
3X-DEFPA-MC
requires BN26x or BN25H connecting cables; maximum
six DEFPA-AC/DC/UC/MC per system
PCI FDDIcontroller, copper, single-attachment station UTP, 8
8
8
8
8
8
3X-DEFPA-UC
requires BN26x or BN25H connecting cables; maximum
six DEFPA-AC/DC/UC/MC per system
8-pin MP-to-8-pin MP, screened, EIA/TIA category 5 cable
BN26M-xx
8-pin MP-to-8-pin MP, screened, crossover, EIA/TIA
BN26S-03
category 5 cable, 3 meters
3-m unshielded twisted pair RJ45 connectors
BN25H-03
Gigabit Ethernet Adapter
For maximum performance, Compaq recommends configuring two DEGPA-SA adapters (or less) per PCI drawer,
however, eight adapters per PCI drawer may be configured to achieve maximum connectivity.
PCI Gigabit Ethernet adapter, does not support network
8
8
8
8
8
8
DEGPA-SA
boot

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 8 − Networks and Communications (continued)
ATM Adapters
For maximum performance, Compaq recommends configuring four 3X-DAPCA-FA adapters (or less) per PCI drawer,
however, eight adapters per PCI drawer may be configured to achieve maximum connectivity.
PCI-to-ATMworks 155-Mbit adapter, fiber
8
8
8
3X-DAPBA-FA
PCI-to-ATMworks 155-Mbit adapter, UTP
8
8
8
3X-DAPBA-UA
PCI-to-ATMworks 622-Mbit adapter, fiber
8
8
8
3X-DAPCA-FA
Step 9 − MEMORY CHANNEL
• Up to two PCI System Area Network controllers supported on AlphaServer GS80 systems
• Two-node clusters can be configured by ordering a CCMAB-AA for each system and one BN39B-04 or BN39B-10
cable, cable connects directly to CCMAB-AA in each system
• For three or four system clusters, order one CCMAB-AA adapter and one BN39B-04 or BN39B-10 cable for each
system and one CCMHB-AA hub for the cluster
• CCMHB-AA includes four CCMLB-AA line cards and supports up to four nodes; expansion up to eight system nodes
can be achieved by adding up to four additional CCMLB-AA line cards
• If two or more CCMAB-AA controllers are configured in each system, a second CCMHB-AA hub is required for
clusters with more than two nodes; in two-node clusters the CCMAB-AA may be directly connected
• One or two MEMORY CHANNEL adapters may be placed on a PCI bus segment; however, no other devices may
be placed on the same segment, and the remaining slots must be left empty.
Tru64 UNIX Systems (V5.1 and later)
• Each system in the cluster requires a TruCluster Server software license (QL-6BRAG-AA)
Tru64 UNIX Systems (V4.0G)
• Requires Tru64 UNIX V4.0G with TruCluster V1.6
• Each system node in a MEMORY CHANNEL cluster requires a TruCluster Production Server (QB-3RLAG-AA) or
TruCluster MEMORY CHANNEL (QB-4ZCAG-AA) software license
• TruCluster MEMORY CHANNEL license (QB-4ZCAG-AA), normally used for high performance technical computing
applications, not required if systems include a TruCluster Production Server license (QB-3RLAG-AA)
OpenVMS Systems
• Requires OpenVMS V7.2-1H1 or later and OpenVMS Cluster license (QL-MUZAG-AA)
MEMORY CHANNEL Fiber Optic Cable Option
• In cases where nodes must be separated by a longer distance than standard copper cables allow, the CCMFB
option converts the output of the standard CCMAB controller or CCMLB line card to single-mode fiber optic cable.
The fiber optic connection may be up to 2,000 meters long between two CCMAB controllers connected in virtual
hub mode, or 3,000 meters between a CCMAB controller and a CCMHB hub. (The connection from the CCMHB
hub to a second system may also be 3,000 meters). The CCMFB option requires a second PCI slot in the system
from which it draws power only. It is normally connected to the corresponding CCMAB controller with the short
BN39B-01 cable. The CCMFB is also used in the CCMHB hub where it occupies a slot normally used by the
CCMLB line card, limiting expansion to four radial fiber optic connections.
• The CCMHB-BA hub expansion box provides additional slots for up to eight fiber optic connections. Two standard
length, single-mode fiber optic cables are available (BN34R-10 and BN34R-31); however, users normally provide
this connection. Customers should reference the TIA/EIA 568-A Commercial Building Telecommunications
Cabling Standard, Section 12.3.4. Fiber optic connectivity is completely transparent to the systems using it and
has no performance impact.
• Up to two CCMHB-AA hubs may be mounted in an H9A20-AA expansion cabinet by utilizing a 2T-MAVRK-AA rackmounting kit for each hub. Each CCMHB-AA hub mounted in an expansion cabinet replaces the space available
for one PCI drawer.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 9 − MEMORY CHANNEL (continued)
MEMORY CHANNEL Controller
PCI System Area Network controller, maximum two per system, two per QBB, two per PCI drawer,
two per PCI segment.
System Area Network hub with four line cards; includes BN19P-2E power cord for Canada, Japan,
and US operations; country-specific power cord for other regions is required
MEMORY CHANNEL hub expansion box with no line cards
MEMORY CHANNEL hub rack-mounting kit
Expansion line card for CCMHB hub
1-m cable for CCMAB and CCMHB
4-m cable for CCMAB and CCMHB
10-m cable for CCMAB and CCMHB
Copper-to-single mode fiber optic converter

CCMHB-BA
2T-MAVRK-AA
CCMLB-AA
BN39B-01
BN39B-04
BN39B-10
CCMFB-AA

Country-specific Power Cords for Standalone MEMORY CHANNEL Hubs
Australia, New Zealand
Central Europe
Denmark
Egypt, India
Ireland, United Kingdom
Israel
Italy
Japan
Switzerland

BN19H-2E
BN19C-2E
BN19K-2E
BN19S-2E
BN19A-2E
BN18L-2E
BN19M-2E
3X-BN46F-02
BN19E-2E

CCMAB-AA
CCMHB-AA

Power Cord for MEMORY CHANNEL Hubs Rackmounted in H9A20-AA/AB/AC Cabinets
IEC 320 power cord (one mandatory per hub)
(Note: MEMORY CHANNEL hubs mounted in H9A20-AA cabinets do not require additional power cords.)

BN35S-02

Step 10 − System Console Support
System Management Console
• GS80 systems require the ability to log console messages, provide remote access for service and support, and, in
some cases, manage multiple hardware partitions. The system management console is mandatory if the customer
has no other means to provide these capabilities.
• PC-based system management console is required for system power-up, diagnostics, console partitioning, and
console display and logging for use with AlphaServer GS80 systems.
• Includes network interface cards, universal modem, Compaq console software, 101-key keyboard, mouse, and
console documentation kit
• A monitor is required for use with the system management console. Choose monitor listed in Step 12.
• Systems configured with redundant consoles or employing hardware partitioning require the ability to connect
multiple consoles. A console hub is mandatory if the customer has no other means to provide these capabilities.
• Console printer recommended, but not required.
PC-based system management console in tower package, includes network interface cards and
3X-DS8BA-AA
Compaq console software
PC-based system management console in mini-tower package, includes network interface cards and
3X-DS8BA-AB
Compaq console software, Europe
PC-based system management console in desktop package, includes network interface cards and
3X-DS8BA-BA
Compaq console software, US/Canada/Japan
PC-based system management console in desktop package, includes network interface cards and
3X-DS8BA-BB
Compaq console software, Europe
Console hub for use with system management console, includes console concentrator, cables, and
3X-DS8AA-AA
universal power supply; mounts in system cabinet and communicates with the system
management console over Ethernet using the Telnet protocol.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 10 − System Console Support (continued)
System Management Console − Modem Localization Kits
System management consoles include one adapter kit
•
3X-DS8BA-AA/BA includes a localization kit for use in US, Canada, Japan, Mexico, Brazil, Argentina, Peru and
Taiwan
•
3X-DS8BA-AB/BB includes a localization kit for use in Great Britain, Ireland, Hong Kong, Singapore, and Malaysia
In all other cases, the appropriate localization kit is required:
Australia
3R-A1608-AA
Austria
3R-A1607-AA
Belgium
3R-A1609-AA
China
3R-A1594-AA
Denmark
3R-A1596-AA
Finland, Norway
3R-A1597-AA
France
3R-A1598-AA
Germany
3R-A1595-AA
Greece
3R-A1606-AA
India
3R-A1600-AA
Italy
3R-A1601-AA
Netherlands
3R-A1602-AA
New Zealand
3R-A1603-AA
Sweden, Iceland
3R-A1604-AA
Switzerland
3R-A1610-AA
System Management Console − Country-specific Power Cords
• System management console includes a line cord for use in North America. Order a country-specific line cord if
required.
Australia, New Zealand
BN19H-2E
Central Europe
BN19C-2E
Denmark
BN19K-2E
Egypt, India
BN19S-2E
Ireland, United Kingdom
BN19A-2E
Israel
BN18L-2E
Italy
BN35M-02
Japan
3X-BN46F-02
North America
BN26J-1K
Switzerland
BN19E-2E
Step 11 − Graphics Support
• Graphics support for GS80 can be provided through use of a graphics adapter
ELSA Gloria synergy graphics with 8-MB SGRAM 1600 x 1200, 2D/3D graphic accelerator, maximum
one per system

DA-10697-01-003 — 12.11.2000

SN-PBXGK-BB

QUICKSPECS

Compaq AlphaServer GS80

Step 12 − Monitors
• Graphics monitors other than those listed below can be used if compatible with SVGA graphics ordered with system.
• Selection of video extension cable and country-specific power cord is mandatory for all monitors.
15″ Corporate Series auto-scan color monitor, VGA to 1024 x 768 @ 85 Hz; Northern Hemisphere
3R-VRQV5-24
without power cord
Same as above except Southern Hemisphere without power cord
3R-VRQV5-11
17″ (16″ viewable image size) professional series auto-scanning color monitor, flat definition Trinitron 3R-VRQP7-24
CRT, 0.25 mm aperture grill pitch, VGA to 1280 x 1024 at 75 Hz, TCO 99, MPR-II, Energy Star,
includes 1.8-m video cable; Northern Hemisphere without power cord
Same as above except Southern Hemisphere without power cord
3R-VRQP7-23
19″ (18″ viewable image size) professional series auto-scanning color monitor, flat definition Trinitron 3R-VRQP9-24
CRT, 0.25 mm aperture grill pitch, VGA to 1280 x 1024 at 75 Hz, TCO 99, MPR-II, Energy Star,
includes 1.8-m video cable; Northern Hemisphere without power cord
Same as above except Southern Hemisphere without power cord
3R-VRQP9-23
21″ (19.6″ viewable image size) auto-scanning color monitor, Trinitron CRT, 0.28 mm aperture grill
3R-VRQP1-24
pitch, VGA to 1600 x 1200 at 85 Hz NI, TCO 99, Energy Star, includes 1.8-m video cable;
Northern Hemisphere without power cord
Same as above except Southern Hemisphere without power cord
3R-VRQP1-23
Video Extension Cable
1.8-m video extension cable; order one for each monitor
Monitor Power Cords
Australia, New Zealand
Central Europe
Denmark
Egypt, India
Ireland, United Kingdom
Israel
Italy
Japan
North America
Switzerland

DA-10697-01-003 — 12.11.2000

BN39C-02

BN19H-2E
BN19C-2E
BN19K-2E
BN19S-2E
BN19A-2E
BN18L-2E
BN19M-2E
3X-BN46F-02
BN26J-1K
BN19E-2E

QUICKSPECS

Compaq AlphaServer GS80

Step 13 − System Software
• Media and documentation required for first system on site
• Software Processor Code = G
Tru64 UNIX
• Tru64 UNIX base systems include pre-installed software, Base license, Unlimited User license, Server Extension
license, Open Source Internet Solutions, and iPlanet Web Server Enterprise Edition 4.0
When using Tru64 UNIX V5.1 or later
Tru64 UNIX media and online documentation on CD-ROM
QA-6ADAA-H8
Tru64 UNIX full hard copy documentation
QA-6ADAA-GZ
StorageWorks software package with licenses for Logical Storage Manager and AdvFS Utilities
QB-5RXAG-AA
TruCluster Server license
QL-6BRAG-AA
Advanced Server for Tru64 UNIX, 25 client concurrent use license
QL-5U29M-3D
Advanced Server for Tru64 UNIX, 50 client concurrent use license
QL-5U29M-3E
Advanced Server for Tru64 UNIX, 100 client concurrent use license
QL-5U29M-3F
Advanced Server for Tru64 UNIX, 250 client concurrent use license
QL-5U29M-3G
Advanced Server for Tru64 UNIX, 500 client concurrent use license
QL-5U29M-3H
Layered products media and documentation for Tru64 UNIX on CD-ROM
QA-054AA-H8
DECnet/OSI extended function license for Tru64 UNIX
QL-MTJAG-AA
DECnet/OSI end-system license for Tru64 UNIX
QL-MTKAG-AA
When using Tru64 UNIX V4.0G
Tru64 UNIX media and online documentation on CD-ROM
QA-MT4AA-H8
Tru64 UNIX full hard copy documentation
QA-MT4AA-GZ
StorageWorks software package with licenses for Logical Storage Manager and AdvFS Utilities
QB-5RXAG-AA
TruCluster Available Server license
QL-05SAG-AA
TruCluster Production Server license
QB-3RLAG-AA
Tru64 UNIX Driver for MEMORY CHANNEL license
QB-4ZCAG-AA
Advanced Server for Tru64 UNIX, 25 Client Concurrent License
QL-5U29M-3D
Advanced Server for Tru64 UNIX, 50 Client Concurrent License
QL-5U29M-3E
Advanced Server for Tru64 UNIX, 100 Client Concurrent License
QL-5U29M-3F
Advanced Server for Tru64 UNIX, 250 Client Concurrent License
QL-5U29M-3G
Advanced Server for Tru64 UNIX, 500 Client Concurrent License
QL-5U29M-3H
Layered products media and documentation for Tru64 UNIX on CD-ROM
QA-054AA-H8
DECnet/OSI end-system license
QL-MTJAG-AA
DECnet/OSI extended function license
QL-MTKAG-AA

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 13 − System Software (continued)
OpenVMS
• OpenVMS system base packages include Base license and Compaq Enterprise Integration Server for OpenVMS
License Package Revision V3.0A
• OpenVMS Concurrent Use licenses provide the right to interactively use the operating system by the specified
number of concurrent users on a designated OpenVMS system. OpenVMS Concurrent Use licenses can be
moved from one system to another at user discretion and can be shared in a mixed OpenVMS VAX and
OpenVMS Alpha cluster.
Concurrent Use 1-user license
QL-MT3AA-3B
Concurrent Use 2-user license
QL-MT3AA-3C
Concurrent Use 4-user license
QL-MT3AA-3D
Concurrent Use 8-user license
QL-MT3AA-3E
Concurrent Use 16-user license
QL-MT3AA-3F
Concurrent Use 32-user license
QL-MT3AA-3G
Concurrent Use 64-user license
QL-MT3AA-3H
Concurrent Use 128-user license
QL-MT3AA-3J
Concurrent Use 256-user license
QL-MT3AA-3K
Traditional unlimited-user license
QL-MT2AG-AA
OpenVMS Galaxy
OpenVMS Galaxy Licensing Requirements
For more details about OpenVMS Galaxy licensing requirements, refer to the Software Product Description for the
Compaq Galaxy Software Architecture on OpenVMS Alpha: SPD 70.44.xx – OpenVMS Update 05 is required.
• One OpenVMS Base Operating System License (included in base system) is mandatory for AlphaServer GS80
configured as an OpenVMS Galaxy system.
• One SMP Extension License (included in SMP CPU upgrade) is mandatory for each CPU after the first CPU.
• For each AlphaServer GS80 CPU in an OpenVMS Galaxy, one OpenVMS Galaxy License is mandatory.
• Compaq layered products are licensed as follows:
- One capacity license per system
- One user license per use
• Up to two instances of OpenVMS are supported in OpenVMS Galaxy configurations on AlphaServer GS80 systems.
For more information about OpenVMS Galaxy requirements, configurations, and procedures, refer to the OpenVMS
Alpha Galaxy Guide. The latest version is always available at
http://www.openvms.compaq.com/gsseries/index.html
Compaq Galaxy 1-CPU License
QL-66XAA-3B
Compaq Galaxy 2-CPU License
QL-66XAA-3C
Compaq Galaxy 4-CPU License
QL-66XAA-3D
Compaq Galaxy 8-CPU License
QL-66XAA-3E
OpenVMS V7.2-1H1 media and online documentation on CD-ROM
QA-MT1AU-H8
OpenVMS media and documentation on CD-ROM
QA-MT1AA-H8
OpenVMS base hard copy documentation
QA-09SAA-GZ
Layered products media and documentation for OpenVMS on CD-ROM; includes Compaq
QA-03XAA-H8
Enterprise Integration Server for OpenVMS media and documentation
DECnet/OSI end-system license
QL-MTFAG-AA
DECnet/OSI extended-function license
QL-MTHAG-AA
Cluster License for OpenVMS Alpha
QL-MUZAG-AA
Example: 8-CPU GS80 system in which all processors are licensed for OpenVMS with two hard partitions (each with
four CPUs) and all CPUs licensed for Galaxy:
• Base system order would include a DY-A80BA-Ax and seven 3X-KN8AA-AC SMP upgrade CPUs
• Add one QL-66XAA-3E Compaq Galaxy 8-CPU License
• No other licenses are required for OpenVMS on the SMP instance in the second hard partition with four CPUs.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 14 − Hardware and Software Support Services
• Installation or Installation and Startup is required for all AlphaServer GS80 systems.
• Priority Plus Service Plans Packages are shown below.
• Other service levels are available. Consult a Compaq Customer Service Account Representative for assistance in
selecting the support plan that is most appropriate. For more information on Compaq Services see:
http://www.compaq.com/services/
Installation Services
GS80 Installation Service Package
FP-WINST-80
GS80 Installation Service and Start-up Package
FP-WSTAR-80
GS80 Model 4 Priority Service Plan Packages
• Systems include 1-year hardware warranty, on-site, next day response. Select optional Priority Service Plan
Package, as required:
1-year Service 3-year Service
1-year Priority 24 Service
FP-W0201-12
FP-W0201-36
1-year Priority Plus Service
FP-W0301-12
FP-W0301-36
1-year Priority Premier Service
FP-W0501-12
FP-W0501-36
1-year Priority Executive Premier Service
FP-W0601-12
FP-W0601-36
GS80 Model 8 Priority Service Plan Packages
• Systems include 1-year hardware warranty, on-site, next day response. Select optional Priority Service Plan
Package, as required:
1-year Service 3-year Service
1-year Priority 24 Service
FP-W0202-12
FP-W0202-36
1-year Priority Plus Service
FP-W0302-12
FP-W0302-36
1-year Priority Premier Service
FP-W0502-12
FP-W0502-36
1-year Priority Executive Premier Service
FP-W0602-12
FP-W0602-36
Software − Americas and Asia Pacific Only
• Systems include 90-day Conformance to SPD and Telephone Advisory Support. Select optional Software
Supplemental Support Services if required.
• Software service upgrades for Tru64 UNIX include advisory and remedial software support with new version license
rights for Tru64 UNIX Base, unlimited users, and Server Extensions
• Software service upgrades for OpenVMS include advisory and remedial software support with new version license
rights for OpenVMS Base and Enterprise Integration Package
Recommended Quickstart Services
AlphaServer GS80 Quickstart Service − This service allows customers to quickly configure and setup their systems
for optimal performance and best use of system management and system maintenance features. This 40-hour service
will:
• Evaluate their requirements and current systems/applications environment
• Plan the server partitioning, storage layout, installation, and migration of the new system
• Perform installation and setup
• Provide initial system performance tuning
• Provide training in the use of the System Control Manager
GS80/160 Quickstart Evaluate and Plan
QS-GS1A9-CP

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Step 14 − Hardware and Software Support Services (continued)
Recommended Factory Integration Services
Value-added Implementation Services (VIS) provide systems integration and delivery services. VIS services, including
system integration, extended burn-in, custom documentation, and on-site services can be custom-quoted for the full
range of AlphaServer configurations.
Two pre-packaged VIS services are recommended for popular AlphaServer GS80 system configurations that include
one ESA12000 storage array:
• VIS Level 1: System integration, testing, extended burn-in, and custom documentation of non-partitioned systems
• VIS Level 2: System integration, testing, extended burn-in, and custom documentation of hardware-partitioned
systems
VIS Level 1 and Level 2 Package Contents

Custom module placement and verification
Configuration, exercise, and test of one ESA 12000 external storage unit
including up to 72 disk drives that are included in system order.
Configure HSGxx or HSZxx controllers that are included in the system order
Configure RAID, mirror, or stripe sets to customer requirements
Configure hardware partitions
Software load and installation of Tru64UNIX or OpenVMS
100-hour full system burn-in
Custom Configuration Documentation

VIS Level 1
North America
and Europe
Yes
Yes

VIS Level 2
North America
only
Yes
Yes

Yes
Yes
Yes
Yes
No
Yes; up to 4
Single Instance Multiple Instances
Yes
Yes
Yes
Yes

Level 1 Value-added Implementation Services for non-partitioned AlphaServer GS80/160/320 systems
for North America and Europe
Level 2 Value-added Implementation Services for partitioned AlphaServer GS80/160/320 systems for
North America only
For Level 2 services in Europe, e-mail specific requirements to: customsystems.europe@compaq.com

YT-CSSIT-V1
YT-CSSIT-V2

Full Custom Configurations
VIS Level 1 and Level 2 packages address the most-common customer requirements. For a wider range of
configurations, customers can also choose additional customized services based upon a Statement of Work
agreement. This includes: cluster add-on nodes, larger storage configurations, custom option support, custom
system packaging, mixed operating system partitions, and configured multi-system clusters.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Upgrades
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..

AlphaServer GS80 System Hardware Upgrades
AlphaServer GS80 systems are field upgradeable to support up to eight CPUs.
• AlphaServer GS80 Model 4 can be internally upgraded to an AlphaServer GS80 Model 8 by adding an additional
quad building block.
• Additional upgrades to the AlphaServer GS160 are available. Contact Compaq for details.
System expansion hardware to upgrade an AlphaServer GS80 Model 4 to an AlphaServer GS80
DH-A80BB-AC
Model 8. Includes one quad building block and associated power supplies and cabling. For use in
North America with DA/DY-A80xA-AC
System expansion hardware to upgrade an AlphaServer GS80 Model 4 to an AlphaServer GS80
DH-A80BB-AD
Model 8. Includes one quad building block and associated power supplies and cabling. For use in
Japan and Europe with DA/DY-A80xA-AD/AE
Compaq Capacity on Demand (CCoD) Program
AlphaServer GS80 customers can add additional CPU capacity on demand without waiting to purchase the resource
when it is required and without re-booting their system. The Compaq Capacity on Demand Program, outlined below,
is a two-part process.
Part 1

Customer purchases a system with Tru64 UNIX or OpenVMS CCoD SMP CPU(s) (3X-KN8CA-AD or 3X-KN8CAAE), or customer purchases Tru64 UNIX or OpenVMS CCoD SMP CPU(s) for field installation within an installed
AlphaServer GS80 system.

When purchasing the CCoD CPU(s), the customer signs a CCoD program agreement to purchase the CPU
module(s) within 12 months or upon "first use" of the module(s).

A blank copy of the agreement is available at http://www.compaq.com/alphaserver/cod
Full program terms are outlined in this agreement.
Part 2

The customer will be invoiced for the CPU module(s) upon notification by the customer of "first use" or expiration
of the 12-month period.
Notes:

CCoD CPUs are field installed. Field installation is not included in the CPU option price.

Minimum operating system requirements: Tru64 UNIX V4.0G (V5.1 support planned for early 2001),
OpenVMS V7.2-1H1
GS80 CCoD SMP CPU, includes one 6/731-MHz CPU module with 4-MB on-board cache and Tru64
3X-KN8CA-AB
UNIX SMP license for use under the CCoD program terms
GS80 CCoD SMP CPU, includes: one 6/731-MHz CPU module with 4-MB on-board cache and
3X-KN8CA-AC
OpenVMS SMP license for use under the CCoD program terms

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

Technical Specifications
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..

Physical Characteristics

GS80 Model 4

GS80 Model 8

Dimensions (HxWxD)
Shipping Dimensions
Weight Max Config kg (lb)
Max Shipping Weight kg (lb)

67 x 24 x 39.4 in / 170 x 60 x 100 cm
76.5 x 36 x 48 in / 195 x 79.2 x 122 cm
260 (575)
320 (705)

DA-10697-01-003 — 12.11.2000

Heat dissipation
GS80 Model 4
Minimally configured system (1) 1150 W / 3800 Btu/hr

GS80 Model 8
1900 W / 6400 Btu/hr

Fully configured system (2)

2100 W / 7150 Btu/hr

3450 W / 11650 Btu/hr

Fully configured system (3)
(system cabinet with one I/O
expansion cabinet)
Clearances

4450 W / 15100 Btu/hr

5750 W / 19600 Btu/hr

Operating

Service

Front
Rear
Left Side
Right Side

29.5 in, 75 cm
29.5 in, 75 cm
None
None

Environmental

Operating

Temperature
Humidity
Altitude
Vibration
Regulatory
Agency approvals

41°F to 95°F / 5°C to 35°C
10% to 90%
0-10,000 ft / 0-3 km
5-500 Hz @ .1G maximum

Non-Operating
-40°F to 151°F / -40°C to 66°C
10% to 95%
40,000 ft / 12.2 km

Reviewed to

Power Requirements (4, 5)
Nominal voltage(s)
Frequency range
Phases

Maximum input current/circuit
Rating
Surge current
Total Volt-Amps
Power cord length
Power cap (system)
Receptacle (site)
(industry equivalent)

UL Listed to UL1950
cUL Listed to CAN/C22.2 No. 950-M89FCC Part 15 (Class A)
CE Declaration
EN 60950 1922/A4:1997, European Norm
AS/NZS 3260:1993, Australian/New Zealand Standard
73/23/EEC, Low Voltage Directive
IEC950, 2nd Ed., 4th Amend.
GS80 Model 4
US/Canada
Japan
Europe
120V
200-240V
220-240V
50 Hz−60 Hz
50 Hz−60 Hz
50 Hz−60 Hz
2 circuits
1 circuit
1 circuit
1-phase star
1-phase
1-phase
2-wire+GND
2-wire +GND
2-wire+GND
16A
30A
60A peak
2600VA
15 ft / 4.5 m
2 DEC 12-11193-00
2 DEC 12-11194-00
2 NEMA L5-30R

13A
30A
160A peak
2600VA
15 ft / 4.5 m
1 DEC 12-16886-00
1 DEC 12-19658-01
1 NEMA L6-30R

12A
32A
190A peak
2600VA
15 ft / 4.5 m
1 DEC 12-14379-07
1 Hubbell 332R6W
1 IEC 309 (32A)

QUICKSPECS

Compaq AlphaServer GS80

Power Requirements (4,5)

GS80 Model 8

Nominal voltage(s)
Frequency range
Phases

US/Canada
120V
50 Hz−60 Hz
2 circuits
1-phase star
2-wire+GND

Japan
200-240V
50 Hz−60 Hz
1 circuit
1-phase
2-wire +GND

Europe
220-240V
50 Hz−60 Hz
1 circuit
1-phase
2-wire+GND

Maximum input current/circuit
Rating
Surge current
Total Volt-Amps
Power cord length
Power cap (system)
Receptacle (site)
(industry equivalent)

17A
30A
60A peak
3900VA
15 ft / 4.5 m
2 DEC 12-11193-00
2 DEC 12-11194-00
2 NEMA L5-30R

20A
30A
200A peak
3900VA
15 ft / 4.5 m
1 DEC 12-16886-00
1 DEC 12-19658-01
1 NEMA L6-30R

18A
32A
240A peak
3900VA
15 ft / 4.5 m
1 DEC 12-14379-07
1 Hubbell 332R6W
1 IEC 309 (32A)

(1)
(2)
(3)
(4)
(5)

Depending on Model 4 or 8, a minimally configured system contains two or four power supplies, single CPU module, single
memory module, single system I/O module, minimally configured PCI shelf, and one disk drive.
Depending on Model 4 or 8, a fully configured system contains three or six power supplies, four or eight CPU modules, four or
eight memory modules, two or four system I/O modules, one PCI shelf, and a single storage shelf with six disk drives.
Fully configured system and one expansion cabinet consist of the above “fully configured system” and one expansion cabinet that
includes three PCI shelves, four storage shelves with a total of 24 disk drives.
Power system provides near unity power factor that allows full utilization of the input line current (Watts = VA).
The US/Canada model supports nominal input voltages of 115-117V. The Japan and Europe models support nominal input
voltages of 200-240V.

DA-10697-01-003 — 12.11.2000

QUICKSPECS

Compaq AlphaServer GS80

H9A20 I/O Expander Cabinet
Physical Characteristics
Dimensions (HxWxD)

67 x 24 x 39.4 in / 170 x 60 x 100 cm

Shipping Dimensions

76.5 x 44 x 48 in / 195 x 92 x 122 cm

Weight - kg (lb)
Maximum configuration

613 (1349)

Shipping Weight - kg (lb)
Maximum configuration

743 (1635)

Clearances
Front
Rear
Left Side
Right Side

Operating
29.5 in, 75 cm
6.0 in, 15 cm
None
None

Environmental
Temperature
Humidity
Altitude
Vibration
Heat dissipation1

Operating
Non-Operating
41°F to 95°F / 5°C to 35°C
-40°F to 151°F / -40°C to 66°C
10% to 90%
10% to 95%
0-10,000 ft / 0-3 km
40,000 ft / 12.2 km
5-500 Hz @ .1G maximum
Minimally configured cabinet(1)
250 W / 850 Btu/hr
Fully configured cabinet(2)
2,400 W / 8,200 Btu/hr
US/Canada
Japan
Europe
120V
200-240V
220-240V
50 - 60 Hz
50 - 60 Hz
50 - 60 Hz
2 circuits
2 circuits
2 circuits
1-phase
1-phase
1-phase
2-wire+GND
2-wire+GND
2-wire+GND

Power Requirements (3)
Nominal voltage(s)
Frequency range
Phases

Maximum input current/circuit
Rating
Surge current
Total Volt-Amps
Power cord length
Power cap (system)
Receptacle (site)
(industry equivalent)
(1)
(2)
(3)

22A
30A
150A peak
2600VA
15 ft / 4.5m
2 DEC 12-11193-00
2 DEC 12-11194-00
2 NEMA L5-30R

Service
29.5 in, 75 cm
29.5 in, 75 cm
None
None

12A
30A
150A peak
2600VA
15 ft / 4.5m
2 DEC 12-16886-00
2 DEC 12-19658-01
2 NEMA L6-30R

11A
32A
170A peak
2600VA
15 ft / 4.5m
2 DEC 12-14379-07
2 Hubbell 332R6W
2 IEC 309 (32A)

Minimally configured expander cab contains a minimally configured PCI shelf and one disk drive
Fully configured expander cab contains three PCI shelves and 24 disk drives
The US/Canada model supports nominal input voltages of 115-117V. The Japan and Europe models support nominal input
voltages of 200-240V.

DA-10697-01-003 — 12.11.2000