Digital PDFs

XX-FD4C0-85

2000

124 pages

Original

7.9MB

Document:	PDP-11 VAX-11 Product Summary Apr-Sep 1980
Order Number:	XX-FD4C0-85
Revision:	0
Pages:	124
Original Filename:

OCR Text

~nmnomn
PDP-11, VAX-11
PRODUCT SUMMARY
APRIL-SEPTEMBER 1980

MICRO AND MINICOMPUTER PRODUCTS
THAT MAXIMIZE PERFORMANCE
WHILE MINIMIZING SYSTEM COST

The information in this document is subject to change
without notice and should not be construed as
a commitment by Digital Equipment Corporation.
Digital Equipment Corporation assumes no
responsibility for any errors that may
appear in this summary.

This Product Summary was typeset
using an In-house text processing
system operating on a DECSYSTEM-20.

DIGITAL, DEC, DECUS, DECnet, FOCAL, IAS, MASSBUS,
PDP, RSTS, RSX, UNIBUS, VAX, VMS,
are trademarks of Digital Equipment Corporation

Highlights

•The SB11, a new fully configured LSl-11/2 product for local or
remote communication applications and also
Lab/Instrumentation applications with an optional choice ofterminals

• The PDT-11 /153 is a new version of the intelligent PDT products

•The PDP-11/44, DIGITAL's newest member of the UNIBUS
PDP-11 family features a large cache memory, memory management for up to 1 Megabyte of memory, microprocessor controlled ASCII console, and the new TU58 DECtape II mini-cartridge subsystem.

• DECnet Phase Ill will be supported running under RSX-11 M,
RSX-11 M-PLUS and RSX-11 S operating systems providing new
capabilities in computer networking architecture

• PDP-11 /04 Packaged Systems are not promoted in this product summary, however box level PDP-11 /04s are still available.

•On March 4, 1980 DIGITAL announced a price increase in all
hardware and software products

INTRODUCTION TO SYSTEMS

............................ 1

SB11
Product Offerings ........................................ 4
SB 11 Options ........................................... .4
PDT-11
Product Offerings ........................................ 6
1111 OSystems .......................................... 6
11130 Systems .......................................... 6
11151 Systems .......................................... 7
11152 Systems .......................................... 7
11153 Systems .......................................... 7
11155 Systems .......................................... 7
PDT -11 Option .......................................... 7

PDP-11/60 OPTIONS
Processor Options ...................................... 37
Expansion Hardware .................................... 37
PDP-11 /60 Memory .................................... 38
Cabinets .............................................. 38
PDP-11/70
Product Offerings ...................................... 39
Hardware Systems ...................................... 39
Packaged Systems ...................................... 40
PDP-11/70 OPTIONS
Processor Option ...................................... 42
PDP-11 /70 Memory .................................... 43
Core to ECC MOS Reconfiguration Kit .................... 44

PDP-11/03
Product Offerings ........................................ 9
Hardware Systems ...................................... 9
Packaged Systems ...................................... 10

VAX-11/780
Product Offerings ...................................... 45
Hardware Systems ...................................... 45
Packaged Systems ...................................... 46

PDP-11/23
Product Offerings ...................................... 11
Hardware Systems ...................................... 11
Packaged Systems ...................................... 12

VAX-11/780 OPTIONS
VAX-11/780 Processor Options .......................... 47
Expansion Memory for VAX-11/780 Systems .............. 47
VAX-111780 Multiport Memory Options .................. 48
VAX-11/780 CPU Expansion Cabinet .................... 48
VAX-11/780 UNIBUS Expansion Cabinet .................. 48

PDP-11/03 & PDP-11/23 OPTIONS
PDP-11 /03 & PDP-11 /23 Processor Options .............. 13
PDP-11/03&PDP-11/23Memory ........................ 13
Communications Options ................................ 15
Single Line Asynchronous Interfaces ...................... 15
Four Channel Asynchronous Serial Line Unit .............. 16
Single Line Synchronous Interface ........................ 16
Asynchronous Multiplexer (Programmed 1/0) .............. 17
PDP-11 /03 & PDP-11 /23 Cabinets ........................ 17
PDP-11 /03 & PDP-11 /23 Expansion Boxes ................ 17
PDP-11/03 Terminator Module .......................... 17
PDP-11 /03 & PDP-11 /23 Expansion Cables .............. 18
PDP-11 /03 & PDP-11 /23 Communications Cables .......... 18
PDP-11/03 & PDP-11/23Real-Time1/0 Options .......... 19
PDP-11 /03 & PDP-11 /23 Clock Option .................... 20
PDP-11/04
Product Offerings ...................................... 21
Hardware Systems ...................................... 21
PDP-1134A
Product Offerings ...................................... 23
Hardware Systems ...................................... 23
Packaged Systems ...................................... 25
PDP-11/04 & PDP-1134A OPTIONS
Processor Options ...................................... 28
PDP-1134A Memory Option ......... , .................... 28
PDP-11 /04 & PDP-1134A Memory ........................ 28
PDP-11/04 & PDP-1134A Memory Options ................ 29
PDP-11/44
Product Offerings ...................................... 30
Hardware Systems ...................................... 30
Packaged Systems ...................................... 31
PDP-11/44 OPTIONS
Processor Options ...................................... 32
PDP-11/44 Memory .................................... 33
Battery Back-up Option .................................. 33
PDP-11/60
Product Offerings ...................................... 34
Hardware Systems ...................................... 34
Packaged Systems ...................................... 35

INTRODUCTION TO SYSTEMS OPTIONS .................. 49
EXPANSION MOUNTING HARDWARE
System Unit Expansion Backplanes ...................... 51
Expansion Boxes ...................................... 51
Unibus Repeater ........................................ 52
Cables ................................................ 52
CABINETS
Corporate Cabinets .................................... 52
Standard PDP-11 Cabinets .............................. 52
Read Only Memory Bootstrap Loader .................... 53
MASS STORAGE
LSl-11 Floppy Disk Subsystems .......................... 54
LSl-11 Cartridge Disk Subsystems ........................ 54
Unibus Floppy Disks .................................... 54
Unibus Cartridge Disk Subsystems ...................... 55
Add-On Cartridge Disk Drives ............................ 56
Cartridge Disk Accessories .............................. 56
Unibus Disk Pack Drive Subsystems ...................... 57
PDP-11170 Disk Pack Drive Subsystems .................. 57
VAX-11 /780 Disk Pack Drive Subsystems ................ 58
Add-On Disk Pack Drives ................................ 59
Disk Drive Accessories .................................. 69
Magnetic Tape Subsystems
Mounted in H9602 Cabinets ............................ 60
Mounted in H960 Cabinets ............................ 61
Mounted in H9646 Cabinet ............................ 61
Mounted in VAX-11/780 Cabinets ...................... 61
Add-On Magnetic Tape Transports
Mounted in H9602 Cabinets ............................ 62
Mounted in H960 Cabinets ............................ 62
Mounted in VAX-11/780 Cabinets ...................... 62
INPUT/OUTPUT
Hardcopy 1Terminals .................................... 63
LSl-11 Line Printers .................................... 64
UNIBUS Line Printers .................................. 64
Video Terminals ........................................ 66

UNIBUS COMMUNICATIONS OPTIONS
Auxiliary Processor Option .............................. 67
Single Line.Asynchronous Interfaces ...................... 67
Asynchronous Multiplexers (Programmed 1/0) ............ 68
Asynchronous Multiplexers (NPR Output) ................ 69
Line Adapters .......................................... 70
Single Line Synchronous Interfaces ...................... 70
Local Network Link Modules ............................ 70
Remote Network Link Modules .......................... 72
Multiple Line Synchronous/ Asynchronous Interfaces ...... 73
Auto Dial Interfaces .................................... 73
Communications Accessories ............................ 74
REAL-TIME 1/0 OPTIONS
Unibus Real-Time 1/0 Options ............................ 75
1/0 Accessories ........................................ 78
INDUSTRIAL PRODUCTS
Industrial Control Microcomputers ........................ 79
Unpackaged Industrial Control Microcomputers .......... 79
LSI-BUS Industrial 1/0 Subsystem ........................ 79
UNIBUS Industrial 1/0 Subsystem ........................ 79
1/0 Subsystem Cabinet .................................. 80
DPM Host System Kits .................................. 80
Dataway Connector Sets ................................ 81
DPM Terminals ........................................ 81
Multiplexers ............................................ 81
1/0 Subsystems ........................................ 81
110 Subsystems Modules and Options .................... 82
OPERATING SYSTEMS AND ADDITIONAL SOFTWARE
RT·11 OPERATING SYSTEM .............................. 85
RT 2 • • • • • . • • • . • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 85
PDT-11 2780/3780 PE .................................. 85
RT-11/LSl-112780 ...................................... 86
FORTRAN IV/RT-11 .................................... 86
BASIC-11/RT-11 ...................................... 86
BASIC-11/RT-11 EXTENSIONS .......................... 86
MU BASIC/RT-11 ...................................... 87
FOCAL/RT-11 .......................................... 87
APL-11/RT-11 .......................................... 87
FORTRAN Graphics Package ............................ 87
SSP-11 SCIENTIFIC SUBROUTINE PACKAGE ............ 88
INSTRUMENT Bus Subroutnes .......................... 88
FORTRAN IV /RT-11 EXTENSIONS ........................ 88
DECnet/RT-11 .......................................... 88
RT-11/2780 ............................................ 89
FMS-11 ................................................ 89
RSX-11M OPERATING SYSTEM .......................... 90
FORTRAN IV .......................................... 90
FORTRAN IV-PLUS .................................... 90
RSX-11 M/2780 ........................................ 91
DBMS-11/RSX-11M .................................... 91
BASIC-11/IAS-RSX .................................... 91
PDP-11 BASIC-PLUS-2 ................................ 91
PDP-11 COBOL ........................................ 92
CORAL66 ............................................ 92
FORTRAN Graphics Package ............................ 92
SSP-11 SCIENTIFIC SUBROUTINE PACKAGE ............ 92
RMS-11K .............................................. 93
DATA TRIEVE-11 /RSX-11 M .............................. 93
SORT-11 .............................................. 93
DECnet-11 M .......................................... 93
RSX-11 M/SNA PE ...................................... 94
MUX200/RSX .......................................... 94
RSX-11M/3271 PE ...................................... 94
UN1004/RSX .......................................... 95

COMM IOP-DZ for RSX-11 M ............................ 95
COMM IOP-DUP for RSX-11 M .......................... 95
RJE/HASP ............................................ 96
KMC11 TOOLS ........................................ 96
RSX-11 M-PLUS OPERATING SYSTEM .................... 97
DATATRIEVE-11/RSX-11M .............................. 97
BASIC-11 /IAS-RSX .................................... 98
FORTRAN IV .......................................... 98
FORTRAN IV-PLUS .................................... 98
PDP-11 COBOL ........................................ 98
SORT-11 .............................................. 99
DECnet-11 M-PLUS .................................... 99
PDP-11 BASIC-PLUS-2 ................................ 99
RSX-11S OPERATING SYSTEM .......................... 100
DECnet-11 S .......................................... 100
RSTS/E OPERATING SYSTEM ............................ 101
DATATRIEVE-11/RSTS/E .............................. 101
DATATRIEVE-11/RSTS/E UPGRADE .................... 101
PDP-11 BASIC-PLUS-2 ................................ 101
PDP-11 COBOL ...................................... 102
APL-11 .............................................. 102
FORTRAN IV/RSTS/E .................................. 102
RSTS/E/2780 ........................................ 102
DECnet/E ............................................ 103
IAS OPERATING SYSTEM .............................. 104
FORTRAN IV .......................................... 104
FORTRAN IV-PLUS .................................... 104
BASIC-11/IAS-RSX .................................... 105
PDP-11 BASIC-PLUS-2 ................................ 105
PDP-11 COBOL ...................................... 105
CORAL 66 ............................................ 105
FORTRAN Graphics Package .......................... 106
RMS-11K ............................................ 106
DATATRIEVE-11/IAS .................................. 106
DBMS-11 ............................................ 106
SORT-11 ............................................ 107
DECnet-IAS .......................................... 107
UN1004/IAS .......................................... 107
MUX200/IAS .......................................... 108
COMM IOP-DZ for IAS ................................ 108
COMM IOP-DUP for IAS ................................ 108
RJE/HASP ............................................ 109
KMC11 TOOLS ........................................ 109
IAS/3271 PE .......................................... 109
IAS/2780 ............................................ 109
VAXNMS OPERATING SYSTEM .......................... 110
VAX-11 FORTRAN IV-PLUS ............................ 110
PDP-11 BASIC-PLUS-2/VAX .......................... 110
VAX-11 COBOL-74 .................................... 111
VAX-11 BLISS-32 ...................................... 111
PDP-11 CORAL 66/V AX ................................ 111
MUX200/VAX ........................................ 111
VAX-11 PASCAL ...................................... 112
PDP-11 DATATRIEVE/VAX ............................ 112
FORTRAN-IV/VAX TO RSX Cross Compiler .............. 112
DECnet-VAX .......................................... 112
VAX-112780/3780PE .................................. 113
DX/VMS .............................................. 113
Pen Plotter Utility ...................................... 113
Digitizer Utility ........................................ 113
Engineering Drawing Utilities ............................ 114
VAX-11/780 Diagnostics Extended ...................... 114
INDEX .................................................. 115

This Summary gives you concise descriptions of the latest OEM Microcomputers, Minicomputers, Systems and
Options as well as configuring information about each product.
The catalog is divided into three major sections.
• The first section features microcomputers, minicomputers and corresponding packaged systems for each
product offering along with product specific options.
• The second section features a wide range of fully compatible add-on options for all product offerings such as
mass storage devices, lineprinters, and communications hardware.
• The third section features all operating systems plus additional software packages running under each
operating system available for added performance.
All packaged systems described in this summary are configured with an LA36 DECwriter II, VT100 console
terminal or LA38, LA120 Hardcopy terminal. For system configurations other than those described here, please
contact your local DIGIT AL Sales Office.
An alphabetical index is included at the back of the catalog for easy reference of all systems, options and software
contained within this summary.

System Code
The first entry is the order number for the system, with 120 Vac, 60 cycle power. The second entry, shown
immediately below in italics is used for 240 Vac, 50 cycle power systems.
The basic features and specifications of each system are included in the description. More complete hardware and
software descriptions can be found in option bulletins, handbooks, and Software Product Descriptions.

Box
The diagrams shown below indicate the number of system units in the CPU backplane or in BA 11-type expander
boxes.

SU 1

Dedicated Backplane
SU 2

SU 2

SU3

SU 3

SU4

SU 4

SU 5

SU 5
PDP-11/04, PDP-11/34A CPU Backplane
or
BA11-K Expander Box

- -

SU6

Dedicated Backplane
PDP-11/44, PDP-11/60 CPU Backplane
or
BA 11-P Expander Box

Quad Slot
Hex Slot
Hex Slot

Quad Slot

SU 1

Hex Slot

SU2

PDP-11/70 CPU Backplane
BA11-L Expander Box

-1-

INTRODUCTION

Expansion Space
Amount of expansion space available in the system.
LSl-11 Double slot Space in pre-wired 11 /03 backplane which will accept a 5.2185 inch
(13.255cm) high module for PDP-11/03 systems.
LSl-11 Quad slot
Space in pre-wired backplane which will accept a 10.437 inch (26.510cm)
high module for PDP-11 /03 systems.
Quad slot
Space in pre-wired backplane which will accept a 10.437 inch (26.510cm)
high module for UNIBUS systems.
Hex slot
Space in pre-wired backplane which will accept a 15.604 inch (39.634cm)
high module for UNIBUS systems.
SU

System Unit. Unit of space in chassis for mounting pre-wired backplane(s)
which can accept Hex- or Quad-sized modules.

MASSBUS Port

Unit of expansion space in PDP-11170 processor box reserved for connection of high-speed peripheral options.

MBA

MASSBUS adapter

UBA

UNIBUS adapter

Power Available Amps
Current available for system expansion @+5Vor@+5V, @+15V, @-15V.

System Bus Loads Available
The number of loads remaining on the UNIBUS. There can be a total of 20 bus loads or 50 feet (15.2 meters) of
UNIBUS cable before a Bus Repeater, DB11, is needed.

Support Category
A brief description of the support categories for DIGIT Al's software products follows. The warranty
period for DIGIT AL-supported products will be for. the 90 days following installation (except where local
law requires otherwise). Please refer to Software Product Descriptions and the Software Support
Categories Addendum for further details.

A
B
C

DIGITAL Supported - DIGITAL Installed.
DIGITAL Supported - CUSTOMER Installed.
CUSTOMER Supported.

-2-

PACKAGE SYSTEM MODEL NOMENCLATURE

OPERATING SYSTEM

A
E
M
N
R

IAS
RSTS/E
RSX-11M
RSX-11 M-PLUS
RT-11
VAX/VMS

CONSOLE

SYSTEM DEVICE

H
L
M

s
T

RP06
RK07
RL01
RL02
RX02
RM03
RM02

A
B

c
L

LA38
VT100
LA120
LA36

REVISION
A-Z

rn I I I I I I rn
SYSTEM CLASS

PROCESSOR

LOAD DEVICE

c CORE
s SOLID-STATE

v 11/03
w 11/23

A
B
H
L
M

2
3
4
6
7
A

11/04
1134A
11/44
11/60
11/70
11/780

s
v
w

TS11
TU77
RK07
RL01
RL02
RX02
TE16
TU45

If processor code is letter, then X.
If processor code Is number, then 0.

-3-

POWER/SOFTWARE
SUPPORT LEVEL

A
D

120V/60Hz full support
240V /50Hz full support

120V/60Hz unsupported
240V /50Hz unsupported

K
N

120V/60Hz license only
240V /50Hz license only

SB11

SB11 PRODUCT OFFERINGS
All SB11 products feature:
• LSl-11/2CPU
• 32Kb RAM
• 2 Serial line units
• 2 additional LSI-BUS interfaces
• 60 Hz clock
• Universal power supply
• Sockets for Boot ROM
SB11 s are packaged one way (fully configured):
•

SB11 box

3.62 in. H x 13.38in.Wx11.7 in. D
(9.19cm Hx33.98cm Wx29.71cm D)
These SB11 scan be used as a table top unit or mounted on a surface in any plane.

Development work for an SB11 application can be carried out on an RT-11 V4 based system (such as PDP-11 /03 or PDP-11 /23).
In addition, hardware options such as TU58-VA for mass storage, and choice of terminals are available.

SB11 MICROCOMPUTERS
SB11-DA

This SB11 configuration is set up for local communication applications and provides a total of 10
asynchronous serial lines (two DLV11-Js) for user equipment.

SB11-EA

This SB11 configuration is set up for remote communication applications and provides a total of 7
asynchronous serial lines (one DLV11-J, one DLV11-E) for user equipment. The DLV11-E provides
one serial line with modem control for remote phone line applications.

SB11-FA

This SB11 configuration is set up for Lab/Instrumentation applications. This version has an IBV11
for interfacining with the IEEE STD 488-1975 instrument bus. The DLV11-E provides one serial line
with modem control for remote phone line applications.

SB11 OPTIONS
SB11 PROCESSOR OPTION
KEV11

Extended Arithmetic Option. Includes fixed and floating point instructions. Mounts on LSl-11 /2
CPU board.

MASS STORAGE
TU58-VA

DECtape II dual drive cartridge tape unit provides 512Kb of storage. This table top option includes
the necessary power cord, data cable and boot chips (MXV11-A2) for installation with the SB11.

TERMINALS
LA34-DA

Table-top DECwriter IV printing terminal. Includes universal power supply, standard EIA interface
and EIA null modem cable. Variable horizontal tabs and margins, four character sizes, six line
spacings and printhead adjustment. 9x7 dot matrix. Can handle single sheets and roll paper. 30character per second print speed and baud rates up to 300 bits per second.
NOTE: Communication cables are not provided with the LA34 terminal and must be ordered
separately. The recommended cables are: 1) BC21 B for local connection of the LA34 to the DLV11
or MXV11.

-4-

LA38-GA

Table-top DECwriter IV printing terminal. Includes universal power supply, standard EIA interface
and EIA null modem cable. Variable horizontal tabs and margins, four character sizes, six line
spacings and printhead adjustment. 9x7 dot matrix. Can handle up to a 4-part computer form as
well as single sheets and computer paper. 18-button numeric keypad, 30-character per second
print speed and baud rates up to 300 bits per second.

NOTE: Communication cables are not provided with the LA38 terminal and must be ordered
separately. The recommended cables are: 1) BC21 B for local connection of the LA38 to the DLV11
or MXV11.

LA38-HA

Free-standing DECwriter IV printing terminal. Includes stand, universal power supply, standard EIA
interface and EIA null modem cable. Variable horizontal tabs and margins, four character sizes, six
line spacings and printhead adjustment. 9x7 dot matrix. Can handle up to a 4-part computer form
as well as single sheets and roll paper. 18-button numeric keypad, 30-character per second print
speed and baud rates up to 300 bits per second.

NOTE: Communication cables are not provided with the LA38 terminal and must be ordered
separately. The recommended cables are: 1) BC21 B for local connection of the LA38 to the DLV11
or MXV11.

LA120-DA

EIA version high speed interactive hardcopy free-standing terminal. Includes universal power
supply. 180 characters per second print speed. Up to 9600 baud. 7x7 dot matrix. Contoured
typewriter-styled keyboard with N-key rollover.

NOTE: Communication cables are not provided with the LA120 terminal and must be ordered
separately. The recommended cables are: 1) BC20N for local connection to the DLV11 or MXV11
(one BC20N is included with each SB 11 ), and 2) BC05D for connection of the VT100 to a modem.

VIDEO TERMINALS
VT100-AA
VT100-AB

High performance video display terminal. (Table-top) Features include double-width/double-size
characters, 80 columns x 24 lines or 132 columns x 14 lines, detached keyboard, line-drawing
graphic characters, smooth scrolling, split screen, reverse video or underline character attribute
and composite video input/output. The VT100 operates on full-duplex asynchronous communication lines, and is supplied with a standard EIA interface.

NOTE: Communication cables are not provided with the VT100 terminal and must be ordered
separately. The recommended cables are: 1) BC20N for local connection to the DLV11 or MXV11
(one BC20N is included with each SB11), and 2) BC05D for connection of the VT100 to a modem.

VT1XX-AB

Advanced Video option for VT100. Provides all four character attributes: BOLD, BLINK, UNDERLINE, and REVERSE VIDEO in any combination. Adds 10 additional lines of 132-column data for a
total of 132 columns x 24 lines.

-5-

PDT-11

PDT-11 PRODUCT OFFERINGS
The basic PDT-11 's feature:
• Up to 60Kb RAM Memory
• PDP-11 codecompatibilty
PDT-11 s are packaged two ways:
• Intelligent Terminals
11110 and 11130 are intelligent terminals which utilize the VT100 video display terminal, including advanced video
option. 11130s come with the TU58 DECtape II minicartridge subsystem providing 512Kb of storage. Some versions of
11110s and 11130s include the DFT11 Cluster controller which supports three additional terminals.
• Floppy Disk based systems
1115Xs are intelligent stand-alone systems with a choice of terminals. 111 SXs include RX01 dual floppy disk drives
providing 512Kb of storage. Some versions include the DFT11 Cluster controller which supports three additional
terminals.

RT 2 /PDT (Run-time RT-11 for the PDT) license is bundled into the 11130 and 1115X PDTs. This license, provided with each unit,
allows the run time portion of RT-11 to be used on that PDT. Advanced software is available including RT-11 Operating System,
and additional software, FORTRAN IV, BASIC-11 and MACR0-11 programming languages.

11110 Systems
MODEL

MEMORY

MASS
STORAGE

TERMINAL

OTHER OPTIONS
INCLUDED

11110-BC
11110-BD

32Kb

None

VT100
(intelligent)

VT1XX-AB
(Advanced Video)

11110-DC
11110-DD

60Kb

None

VT100
(intelligent)

VT1XX-AB
(Advanced Video)
DFT11
(Cluster controller)

11130 Systems
MODEL

MEMORY

MASS
STORAGE

TERMINAL

OTHER OPTIONS
INCLUDED

11130-BC
11130-BD

32Kb

TU58

VT100
(intelligent)

VT1XX-AB
(Advanced Video)

11130-CC
11130-CD

60Kb

TU58

VT100
(intelligent)

VT1XX-AB
(Advanced Video)

11130-DC
11130-DD

60Kb

TU58

VT100
(intelligent)

VT1XX-AB
(Advanced Video)
DFT11
(Cluster controller)

-6-

11151 Systems
MODEL

MEMORY

MASS
STORAGE

TERMINAL

OTHER OPTIONS
INCLUDED

11151-BE
11151-BF

32Kb

RX01
(intelligent)

VT100

11151-CE
11151-CF

60Kb

RX01
(intelligent)

VT100

11151-CH
11151-CJ

60Kb

RX01
(intelligent)

VT100

DFT11
(Cluster controller)

MODEL

MEMORY

MASS
STORAGE

TERMINAL

OTHER OPTIONS
INCLUDED

11152-BE
11152-BF

32Kb

RX01
(intelligent)

LA120

11152-CE
11152-CF

60Kb

RX01
(intelligent)

LA120

11152-CH
11152-CJ

60Kb

RX01
(intelligent)

LA120

DFT11
(Cluster controller)

MODEL

MEMORY

MASS
STORAGE

TERMINAL

OTHER OPTIONS
INCLUDED

11153-BE
11153-BF

32Kb

RX01
(intelligent)

LA38

11153-CE
11153-CF

60Kb

RX01
(intelligent)

LA38

11153-CH
11153-CJ

60Kb

RX01
(intelligent)

LA38

11152 Systems

11153 Systems

-7-

DFT11
(Cluster controller)

11155 Systems
MODEL

MEMORY

MASS
STORAGE

TERMINAL

11155-BE
11155-BF

32Kb

RX01
(intelligent)

LA36

11155-CE
11155-CF

60Kb

RX01
(intelligent)

LA36

11155-CH
11155-CJ

60Kb

RX01
(intelligent)

LA36

OTHER OPTIONS
INCLUDED

DFT11
(Cluster controller)

PDT-11 OPTION
ADVANCED VIDEO OPTION

VT1XX-AB

VT100 Advanced Video option. Provides all four character attributes: BOLD, BLINK, UNDERLINE,
and REVERSE VIDEO in any combination. This option also provides for an alternate character set
and has additional RAM available that allows the full 24 lines X 132 character display.
PREREQUISITE: 11151

-8-

PDP-11/03 PRODUCT OFFERINGS
All PDP-11/03 processors feature:
• Eight general-purpose registers
• Power fail/auto-restart
• Stack architecture
• ASCII console emulator allowing complete control of the computer via any ASCII terminal
• Single level vectored-priority interrupts
• Direct memory access (OMA)
• Set of over 400 instructions
PDP-11 /03s are packaged three ways:
• Smallbox
3.5 in. H x 19.0 in. W x 13.5 in. D
(8.89cm H x 48.26cm W x 34.29cm D)
These 11 /03s include CPU and memory (expandable up to 64K bytes) in a cabinet mountable chassis.
• Largebox
5.2 in. H x 19.0 in. W x 26.7 in. D
(13.3cm H x 48.26cm W x 67.96cm D)
These 11 /03s include CPU and memory (expandable up to 64Kb); KEV11 extended instruction and floating point
instruction set, BDV11-AA bootstrap loader, diagnostic, PROM/ROM, terminator module in a cabinet mountable
chassis.
• Packaged system
These systems Include a large box with RT-11 Operating System, CPU, memory, disk and choice of console terminal.

Advanced software is available including RT-11 and RSX-118 Operating Systems, FORTRAN and BASIC programming languages, plus a wide variety of utilities. In addition, hardware options such as expansion memories and peripheral devices are
available.

PDP-11/03 MICROCOMPUTERS
MODEL

MEMORY

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+SV
(90% Load)

BUS
LOADS
AVAILABLE

8Kb

6 LSl-11
Double or
3 Quad slots

14.2

32Kb

6 LSl-11
Double or
3Quad slots

13.3

64Kb

6 LSl-11
Double or
3Quadslots

13.3

8Kb

4 LSl-11
Double or
2Quad slots

7.2

Small Box
MOS Memory

11/03-EA
11103-EB

11/03-SC
11103-SD

11/03-SE
11103-SF

Core Memory

11/03-FA
11103-FB

-9-

PDP-11/03

Large Box
MOS Memory
11/03-LH
11103-LJ

32Kb

6 LSl-11
Quad or Double
slots

16.0

11/03-LK
11103-LL

64Kb

6 LSl-11
Quad or Double
slots

16.0

Note: All S & L models include KEV11.

PDP-11/03 PACKAGED SYSTEMS
Note: After the first fully supported system is purchased, PDP-11/03 packaged systems are also available at unsupported and
license only software support levels. Shown here are the 120/60 and 240/50 fully supported systems. The other available power
variations appear in the Price List.

RT-11 Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

32Kb

RX02
RX02

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

MOS Memory
SR-VXSSA-AA
SR-VXSSA-AD

4 LSl-11 slots*

8.4

LA38

(SR-VXSSA- BA)
(SR-VXSSA- BD)

(VT100)

(SR-VXSSA- CA)
(SR-VXSSA- CD)

(LA120)

SR-VXSSB-AA
SR-VXSSB-AD

64Kb

RX02
RX02

7.7

4 LSl-11 slots*

LA38

(SR-VXSSB-BA)
(SR-VXSSB- BD)

(VT100)

(SR-VXSSB- CA)
(SR-VXSSB-CD)

(LA120)

*Any combination of 4 double or 4 quad LSl-11 modules may be mounted in this space.

MODEL

SR-VXLLB-AA
SR-VXLLB-AD

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

64Kb

RL01
RL01

EXPANSION
SPACE

3 LSl-11 slots*

POWER
AVAILABLE
Amps@+SV

4.5

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

LA38

(SR-VXLLB-BA)
(SR-VXLLB-BD)

(VT100)

(SR-VXLLB-CA)
(SR-VXLLB-CD)

(LA120)

*Any combination of 3 double or 3 quad LSl-11 modules may be mounted in this space.

-10-

PDP-11/23 PRODUCT OFFERINGS
All PDP-11 /23 processors feature:
• Eight general-purpose registers
• Power fail/auto-restart
• Stack architecture
• Direct memory access (OMA)
• Set of over 400 instructions
• EIS (Extended Instruction Set)
PDP-11 /23s are packaged two ways:
• Box
5.2 in. H x 19.0 in. W x 26.7 in. D
(13.3cm H x 48.26cm W x 67.96cm D)
These 11 /23s include CPU and memory; BDV11-AA bootstrap, diagnostic, bus terminator module, DLV11-J four line
EIA interface.
• Packaged system
These systems include a CPU box with operating system, memory, disk and choice of console terminal.

Advanced software is available including the RT-11 and RSX11-S/M Operating Systems, FORTRAN and BASIC programming
languages, plus a wide variety of utilities. In addition, options are available for single and double precision floating point
firmware, expansion memories and peripheral devices.

PDP-11/23 MICROCOMPUTERS
MODEL

MEMORY

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

128Kb

4 LSl-11
Quad or Double
slots

12.3

256Kb

2 LSl-11
Quad or Double
slots

8.9

Box
MOS Memory

11/23-AA
11123-AB

11/23-AC
11123-AD

-11-

PDP-11123

PDP-11/23 PACKAGED SYSTEMS
Note: After the first fully supported system is purchased, PDP-11 /23 packaged systems are also
available at unsupported and license only software support levels. Shown here are the 120/60 and
240/50 fully supported systems. The other available power variations appear in the Price List.

RT-11 Operating System
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

128Kb

RX02
RX02

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

MOS Memory
SR-WXSSA-AA
SR-WXSSA-AD

3 LSl-11 slots

12.45

LA38

(SR-WXSSA- BA)
(SR-WXSSA-BD)

(VT100)

(SR-WXSSA- CA)
(SR-WXSSA-CD)

(LA120)

SR-WXLLA-AA
SR-WXLLA-AD

128Kb

RL01
RL01

2 LSl-11 slots

7.45

LA38

(SR-WXLLA- BA)
(SR-WXLLA-BD)

(VT100)

(SR-WXLLA-CA)
(SR-WXLLA-CD)

(LA120)

RSX-11 M Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

128Kb

RL01
RL01

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+5V

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

MOS Memory
SM-WXLLA-AA
SM-WXLLA-AD

2 LSl-11 slots

7.45

LA38

(SM-WXLLA-BA)
(SM-WXLLA-BD)

(VT100)

(SM-WXLLA-CA)
(SM-WXLLA-CD)

(LA120)

-12-

PDP-11/03 & PDP-11/23 PROCESSOR OPTIONS
KEF11-AA

Single or Double precision Floating Point microcode chip for use with PDP-11/23. The microcode
to implement this option resides in two chips on one 40-pin package. Mounts on 11 /23 CPU board.
PREREQUISITE: PDP-11 /23

KEV11

Extended Arithmetic Option. Includes fixed and floating point instructions. Mounts on 11 /03 CPU
board.
PREREQUISITE: PDP-11/03

KUV11-UH

Writable Control Store Option with Upgraded CPU Module.
PREREQUISITE: PDP-11 /03L.

Mounting
Code
LSl-11 Quad slot

BDV11-AA

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

3.0

RT-11

Bootstrap loader, Diagnostic PROM/ROM, Bus terminator module.
PREREQUISITE: PDP-11 /03 or PDP-11 /23.

Mounting
Code
LSl-11 Quad slot

Power Drawn
Amps@+SV

Bus Loads
Drawn

1.6

System Software
RT-11, RSX-11M

PDP-11/03 & PDP-11/23 MEMORY
MMV11-A

SK bytes Read/Write core memory, 1.15 microsecond cycle time.
PREREQUISITE: PDP-11 /03 (small box only).

Mounting
Code

Power Drawn ·
Amps@+SV
7.0

2 LSl-11 Quad slots
MRV11-AA

Bus Loads
Drawn

PROM/ROM memory unit, 32 IC sockets. Accepts 256 x 4 or 51? x 4 fusible link memory devices
and masked ROM devices. Maximum capacity SK bytes. Accepts MRV11-AC PROM chips.
PREREQUISITE: PDP-11 /03

Mounting
Code

Power Drawn
Amps@+SV

LSl-11 Double slot

Bus Loads
Drawn

2.S

MRV11-AC

PROM chip for use on MRV11-AA. PROM chip (512 x 4 array size). Mounts on MRV11-AA board.
PREREQUISITE: MRV11-AA

MRV11-BA

1K byte expandable to SK bytes, UV expandable PROM memory, NO memory chips included.
PREREQUISITE: PDP-11 /03.

Mounting
Code

Power Drawn
Amps@+5V

LSl-11 Double slot
MRV11-BC

Bus Loads
Drawn

0.5S

1K x S-bit UV PROM Chip unprogrammed for use with MRV11-BA. Mounts on MRV11-BA board.
PREREQUISITE: MRV11-BA

-13-

PBP-11/03 & PDP-11/23 OPTIONS

MRV11-C

64Kb PROM/ROM module. Contains sixteen 24-pin sockets for user supplied masked ROMs,
fusible link PROMs and Ultra-Violet erasable PROM.
PREREQUISITE: PDP-11 /03 or PDP-11 /23.
Mounting
Code

Power Drawn
Amps@+SV

LSl-11 Double slot
MSV11-B

2.0

BK byte Read/Write MOS Memory, 550 nanoseconds access time (max).
PREREQUISITE: PDP-11/03.
Mounting
Code

Power Drawn
Amps@+SV

16K bytes dynamic Random Access Memory using 4K bytes RAM chips.
PREREQUISITE: PDP-11 /03 or PDP-11 /23.
Mounting
Code

Power Drawn
Amps@+SV

LSl-11 Double slot
MSV11-DC

1.7

Power Drawn
Amps@+SV

LSl-11 Double slot

1.7

Power Drawn
Amps@+ SY

Bus Loads
Drawn

1.7

LSl-11 Double slot

BK bytes Random Access Memory, two asynchronous (RS-423,232C) EIA serial line units, two
PROM sockets for (24 pin 5V EPROMs, PROMs, ROMs, maximum of BKb) or for 512K byte
bootstrap PROM. 60 Hz crystal control clock. LSl-11 Multifunction Module.
PREREQUISITE: PDP-11 /03 or PDP-11 /23.
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

1.3

LSl-11 Double slot
MXV11-AC

Bus Loads
Drawn

64K bytes dynamic Random Access Memory using 16K bytes RAM chips.
PREREQUISITE: PDP-11 /03 or PDP-11 /23 .
Mounting
Code

MXV11-AA

Bus Loads
Drawn

32K bytes dynamic Random Access Memory using BK bytes RAM chips.
PREREQUISITE: PDP-11 /03 or PDP-11 /23.
Mounting
Code

MSV11-DD

Bus Loads
Drawn

0.6

LSl-11 Double slot
MSV11-DB

Bus Loads
Drawn

32K bytes Random Access Memory, two asynchronous (RS423, 232C) EIA serial line units, two
PROM sockets for (24 pin 5v EPROMs, PROMs, ROMs maximum of BKb) or for 512 byte bootstrap
PROM. 60 Hz crystal control clock. LSl-11 Multifunction Module.
PREREQUISITE: PDP-11 /03 or PDP-11 /23.
Mounting
Code

Power Drawn·
Amps@+ SY

Bus Loads
Drawn

1.3

LSl-11 Double slot
MXV11-A2

Bootstrap PROMs for the MXV11-AA(AC) to boot the RXV21 (RX02), RLV11 (RL01), RXV11 (RX01),
RKV11 (RK05) or TU58. Includes CPU diagnostics. Mounts on MXV11-AA(AC). LSl-11 Bootstrap
ROM.
PREREQUISITE: MXV11-AA(AC).

PB11-AY

Desk Top Universal PROM Programmer with 25' (7.6m) cable for connection to RT-11 (V3B or later)
system (11/03 to 1134A) using a serial line interface (DLV11-E/F/J or DL11-W/E) and RS-232C
cable. Includes Class C software on RX01 disk. Adapter kit and RS-232C cable must be purchased
separately.
PREREQUISITE: RT-11 System
-14-

PB11-AQ

Same as PB11-AY except software on RL01 disk.

PB11K-AA

Adapter kit for 82S129, 82S131 fusible link PRO Ms.
PREREQUISITE: PB 11-AY

PB11K-AB

Adapter kit for 2708 UV PRO Ms.
PREREQUISITE: PB11-AY

PB11K-AC

Adapter kit for 82S181, 82S191 fusible link PRO Ms.
PREREQUISITE: PB11-AY

PB11K-AD

Adapter kit for 2716, 2732 UVPROMs.
PREREQUISITE: PB11-AY

REV11-A

RX01, RK05, Boot, MOS Memory refresh, system diagnostics, BUS terminator.
PREREQUISITE: PDP-11 /03
Power Drawn
Amps@+5V

Mounting
Code
LSl-11 Double slot
REV11-C

Bus Loads
Drawn

1.6

Floppy Disk Boot, MOS Memory refresh, system diagnostics, without BUS terminator.
PREREQUISITE: PDP-11 /03
Mounting
Code

Power Drawn
Amps@+5V

LSl-11 Double slot

Bus Loads
Drawn

1.0

COMMUNICATIONS OPTIONS
SINGLE LINE ASYNCHRONOUS INTERFACES
DLV11-F

Asynchronous line interface module. Supports 20mA current loop or EIA/CCITT interface levels.
Selectable stop and data bits; data rates from 50 to 19,200 bits per second. Does not provide
modem control. Requires cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code
LSl-11 Double slot

DLV11-FA

Bus Loads
Drawn

1.5

System Software
RT-11, RSX-11M

20mA asynchronous line interface module. Selectable stop and data bits; data rates from 50 to
19,200 bits per second. Does not provide modem control. Includes BC05M-04 cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code
LSl-11 Double slot

DLV11-FB

Power Drawn
Amps@+SV

Bus Loads
Drawn

1.5

System Software
RT -11, RSX-11 M

EIA/CCITT asynchronous line interface module. Selectable stop and data bits; data rates from 50
to 19,200 bits per second. Does not provide modem control. Includes BC03L-05 cable.
PREREQUISITE: PDP-11/03 or PDP-11/23
Mounting
Code
LSl-11 Double slot

Power Drawn
Amps@+5V
1.5

Bus Loads
Drawn

System Software
RT-11, RSX-11 M

-15-

PDP-11/03 & PDP-11/23 OPTIONS

DLV11

Serial interface unit. Optically-isolated 20mA current loop or EIA/CCITT interface levels. Selectable
stop and data bits; data rates from 50 to 9600 bits per second. Does not provide modem control.
Requires cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

LSl-11 Double slot

DLV11-E

Bus Loads
Drawn

1.0

System Software

RT-11, RSX-11 M

Asynchronous line interface module with EIA interface levels. Selectable stop and data bits; baud
rates from 50 to 19,200 bits per second. Provides full modem control. Requires cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

LSl-11 Double slot

DLV11-EB

Power Drawn
Amps@+5V

Bus Loads
Drawn

1.5

System Software

RT-11, RSX-11M

Asynchronous line interface module with EIA interface levels. Selectable stop and data bits; baud
rates from 50 to 19,200 bits per second. Provides full modem control. Includes BCOIV-25 cable.
PREREQUISITE: PDP-11103 or PDP-11 /23
Mounting
Code

LSl-11 Double slot

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

RT-11, RSX-11M

1.5

FOUR CHANNEL ASYNCHRONOUS SERIAL LINE UNIT
DLV11-J

4-channel asynchronous serial line unit. Serial line compatibility with EIA RS-232C and RS-423,422
or current loop. Character formats: 7 or 8 data bits, 1 or 2 stop bits, parity or no parity, and even or
odd parity. Baud rates from 150 to 38,400 bits per second. Does not provide modem control.
Requires cables.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

LSl-11 Double slot

DLV11-KA

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

RT-11, RSX-11 M
(one DL V 11-J per system)

1.5

EIA to 20mA converter with BC21 A-03 cable for the DLV11-J.
Provides 11 Obits/sec, 20mA operation.
PREREQUISITE: DLV11-J

SINGLE LINE SYNCHRONOUS INTERFACE
DUV11-DA

Single line interface for connecting LSl-11s to synchronous modems or lines. Provides serial-toparallel and parallel-to-serial data conversion, voltage level conversion, and modem control for
half- or full-duplex operation. It is also capable of transmitting EIA/CCITT data at 9600 bits per
second maximum (limited by modem and data set interface level converters). Includes BC05C-25
cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

LSl-11 Quad slot

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

RT-11, RSX-11M

1.2

-16-

ASYNCHRONOUS MULTIPLEXER (PROGRAMMED 1/0)
DZV11-B

Asynchronous 4 line multiplexer for EIA/CCITT terminals or lines. Features programmable speeds
(up to 9600 bits per second) and formats on a per-line basis. Includes data set control for use with
BELL 103 or 113 modems or equivalent. Includes 7.6m (25 ft.) of cable (BC11 U-25) for connection
to modem.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

LSl-11 Double slot

Power Drawn
Amps@+5V

Bus Loads
Drawn

1.15

System Software

RT-11, RSX-11 M
(one DZV11 per system)

PDP-11/03 & PDP-11/23 CABINETS
H9610-AA
H9610-AB

30 inch cabinet frame, 24.5 inch internal mounting space. Includes 871 power control.

H9612-AA
H9612-AB

40 inch cabinet frame without top, 10.5 inch top load for RL01s with 24.5 inch internal mounting
space remaining. Includes 871 power control.

H9613-AA
H9613-AB

40 inch cabinet frame with top, 35 inch internal mounting space. Includes 871 power control.

H9616-BB
H9616-BC

30 inch expansion cabinet. Mounts to right of H9610 cabinet. Includes 871 power control.

H9617-BB
H9617-BC

40 inch expansion cabinet without top. Mounts to right of H9612 or H9613 cabinet. Includes 871
power control.

H9618-BB
H9618-BC

40 inch expansion cabinet with top. Mounts to right of H9612 or H9613 cabinet. Includes 871 power
control.

PDP-11/03 & PDP-11/23 EXPANSION BOXES
BA11-ME
BA11-MF

BA11-NE
BA11-NF

Small expansion box 3.5" H x 19" W x 15" D, (8.9cm H x 48.33cm W x 38.1cm D) includes one four
rows by four slots LSl-11 backplane and power supply. Accepts 8 double or 4 quad modules.
Cables not included.
PREREQUISITE: PDP-11 /03
Mounting
Code

Power Available
Amps@+5V

Bus Loads
Drawn

03PAN

16.2

N/A

PDP-11/03L expansion box5.19" H x 19" W x 22.7" D, (13.2cm H x48.33cm W x 57.8cm D) includes
one nine (9) slot LSl-11 backplane and 240W power supply. Cables not included.
PREREQUISITE: PDP-11 /03 or PDP-11 /23.
Mounting
Code

Power Available
Amps@+5V

Bus Loads
Drawn

SM PAN

22.0

N/A

PDP-11/03 & PDP-11/23 TERMINATOR MODULE
TEV11

LSl-11 Bus terminator. Required when a BA11-ME,MF expansion box is added. Not required if an
REV11-A or BDV11-A Terminator module is included in configuration.
Mounting
Code

Power Available
Amps@+5V

Bus Loads
Drawn

N/A

LSl-11 Double slot

-17-

PDP-11/03 & PDP-11/23 QPTIONS

PDP-11/03 & PDP-11/23 EXPANSION CABLES
BCV1A-10

10 ft. (1.0m) LSl-11 Bus expansion cable. Required when a second BA 11 expansion box is added to
a PDP-11 /03 or PDP-11 /23 configuration (3 box system).
PREREQUISITE: LSl-11 Double slot (1 in each BA 11 box).

BCV1B-06

6 ft. (1.Bm) LSl-11 Bus expansion cable. Required when a BA 11 expansion box is added to a PDP11 /03 or PDP-11 /23 configuration.
PREREQUISITE: LSl-11 Double slot (1 in 11 /03 or 11 /23, 1 in BA 11 box).

PDP-11/03 & PDP-11/23 COMMUNICATIONS CABLES
BC01V-25

25 ft. (7.6m) RS-232C 1/0 cable with H856 40-pin Berg and RS-232 male connectors, 15 conductor.
Used with DLV11-F for full or limited modem control.

BC03L-05

5 ft. (1.52m) cable for local, serial EIA interfaces.

BC03M-25

25 ft. (7.6m) Null modem cable with RS-232C female connectors both ends.

BC04Z-XX

The following lengths are available: 10 ft. (3.04m), 15 ft. (4.56m), 25 ft. (7.6m). Cable for parallel
interfaces.

BC05C-25

25 fl. (7.6m) RS-232C 1/0 cable with H856 40-pin Berg and RS-232C male connectors, 25 conductor. Used with DLV11-E/F for full or limited modem control.

BC05D-25

25 ft. (7.6m) RS-232C extension cable, RS-232C male to RS-232C female, 25 conductor.

BC05M-2C

2.2 ft. (.67m) Current loop 1/0 cable with H856 40-pin Berg and Mate-n-lock connectors. Used with
DLV11-F for 20mA current loop applications.

BC05W-XX

5-pin conductor signal cable for DRV11-J. Two required for each DRV11-J. The following lengths
are available: 10 ft. (3.04m) or 25 ft. (7.6m).

BCOBR-01

1 ft. (.91 m) 40-conductor flat ribbon cable with F-berg at one end and unterminated at the other
end.

BCOBR-10

12 ft. (3.7m) General purpose 40-conductor flat ribbon cable with F-berg at both ends.

BC20N-05

5 ft. (1.5m) RS-232C null modem cable with 10-pin AMP and RS-232C female connector. Used with
DLV11-J to connect directly to RS-232C male cable from terminal.

BC20M-50

50 ft. (15.2m) RS-422 1/0 cable with 10-pin AMP connectors both ends. For high speed (up to
38.4Kb) communication between DLV11-Js.

BC218-05

5 ft. (1.5m) RS-232C 1/0 cable with 10-pin AMP and RS-232 connectors. Used with DLV11-J.

-18-

PDP-11/03 & PDP-11/23REAL-TIME1/0 OPTIONS
AAV11-A

4-channel 12"bit digital-to-analog converter and scope control.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

LSl-11 Quad slot

ADV11-A

LSl-11 Quad slot

LSl-11 Double slot

LSl-11 Quad slot

Bus Loads
Drawn

System Software

2.0

RT-11

Power Drawn
Amps@+SV

Bus Loads
Drawn

0.9

System Software

RT-11, RSX-11 M

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

1.9

RT-11

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

1.0

RT-11

General pupose parallel multiple line interface. Four 16-bit ports, one port with bit interruptable
capability for all 16 lines. Latched tri-state D type flip flop outputs, unlatched inputs. Requires two
BC05W cables.
Mounting
Code

LSl-11 Double slot

IBV11-A

Power Drawn
Amps@+SV

Interface foundation module for custom interfaces. Includes LSl-11 Bus interface and wire-wrappable area for customer interfacing.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

DRV11-J

RT-11, RSX-11 M

Parallel line OMA interface unit. Single-cycle rate: SOOK bytes/second. Protocol and control signals. Requires cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

DRV11-P

1.5

System Software

Parallel line interface unit. 16-bit diode-clamped input; 16-bit latched-drive output. Protocol and
control signals. Requires cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

DRV11-B

Bus Loads
Drawn

12-bit 16-channel single ended (or 8-channel quasi-differential) analog-to-digital converter.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

DRV11

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

1.8

None

IEEE standard #488-1975 instrument bus interface; includes 4m BN 11 A-04 cable.
PREREQUISITE: PDP-11 /03 or PDP-11 /23
Mounting
Code

LSl-11 Double slot

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

RT-11

0.8

-19-

PDP-11/03 & PDP-11/23 OPTIONS

PDP-11/03 & PDP-11/23 CLOCK OPTION
KWV11-A

16-bit programmable real-time clock, one of four programmable modes user selectable, one of five
crystal-controlled frequencies.

Mounting
Code
LSl-11 Quad slot

Power Drawn
Amps@+SV
1.75

Bus Loads
Drawn

System Software
RT-11

-20-

PDP-11/04 PRODUCT OFFERINGS
All PDP-11 /04 processors feature:
• Eight general-purpose registers
• Power fail/auto-restart
• Stack architecture
• ASCII console emulator allowing complete control of the computer via any ASCII terminal
• Multifunction ROM module with ROM bootstrap loader
• 4-level vectored priority interrupts
• Direct memory access (OMA)
• Set of over 400 instructions
• Automatic self-test feature
PDP-11 /04s are packaged two ways:
• Small box
5.25 in. H x 19.0 in. W x 25.0 in. D
(13.3cm H x48.4cm Wx63.7cm D)
These 11 /04s include CPU and memory (expandable up to 64K bytes) in a cabinet mountable chassis.
• Largebox
10.5 in. H x 19.0 in. W x 26.5 in. D
(26.5cm H x 48.4cm W x 67.6cm D)
These 11 /04s include CPU and memory in a cabinet mountable chassis.

Advanced software is available including RT-11, RSX11-S/M Operating Systems, FORTRAN and BASIC programming languages, plus a wide variety of utilities. In addition, hardware options are available such as cables, expansion memories and
peripheral devices.

PDP-11/04 MINICOMPUTERS
MEMORY

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+5V

BUS
LOADS
AVAILABLE

11/04-BC
11104-BD

16Kb

5 Hex slots
2 Quad slots

22.0

11/04-DC
11104-DD

32Kb

5 Hex slots
2 Quad slots

22.0

11/04-LC
11104-LD

64Kb

4 Hex slots
2 Quad slots

20.0

11/04-FC
11104-FD

16Kb

4 Hex slots
2 Quad slots

22.0

11/04-HC
11104-HD

32Kb

4 Hex slots
2 Quad slots

20.0

11/04-JC
11104-JD

64Kb

4 Hex slots
2 Quad slots

19.0

MODEL

Small Box
MOS Memory

Core Memory

-21-

F?IJF?-1·1/04

Large Box
MOS Memory

11/04-DH

32Kb

11104-DJ

11/04-LH

64Kb

11104-LJ

SU 1-2: 5 Hex slots,
2 Quad slots
3SUs
SU 3-5:

SU 1-2: 4 Hex slots,
2 Quad slots
SU 3-5:
3SUs

22.0

32.0

20.0

32.0

Core Memory

11 /04-HH

32Kb

11104-HJ

11/04-JH
11104-JJ

64Kb

SU 1-2: 4 Hex slots,
2 Quad slots
3SUs
SU 3-5:

20.0

SU 1-2: 4 Hex slots,
2 Quad slots
SU 3-5:
3SUs

19.0

-22-

32.0

PDP-1134A PRODUCT OFFERINGS
All PDP-1134A processors feature:
• Eight general-purpose registers
• Power fail/auto-restart
• Stack architecture
• ASCII console emulator allowing complete control of the computer via any ASCII terminal
• Multifunction ROM module with ROM bootstrap loader
• Hardware multiply/divide
• 4-level vectored priority interrupts
• Hardware memory management
• Direct memory access (OMA)
• EIS (Extended Instruction Set)
• Set of over 400 instructions
• Automatic self-test feature
PDP-1134As are packaged three ways:
• Small box
5.25 in. H x 19.0 in. W x 25.0 in. D
(13.3cm H x 48.4cm W x 63.7cm D)
These 1134As include CPU and memory (expandable up to 256K bytes with MS11-LD) in a cabinet mountable chassis.
• Large box
10.5 in. H x 19.0 in. W x 26.5 in. D
(26.5cm H x 48.4cm W x 67.6cm D)
These 1134As include CPU and memory in a cabinet mountable chassis.
• Packaged system
These systems include a large box CPU with operating system, memory, disk and choice of console terminal.

Advanced software is available including the RT-11, RSX-11 Mand RSTS/E Operating Systems, FORTRAN and BASIC programming languages, plus a wide variety of utilities. In addition, hardware options are available such as cables, expansion memories
and peripheral devices.

PDP-1134A MINICOMPUTERS
MODEL

MEMORY

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+5V

BUS
LOADS
AVAILABLE

1134A-DC
1134A-DD

32Kb

3 Hex slots,
3 Quad slots

15.0

1134A-LC
1134A-LD

64Kb

2 Hex slots
3 Quad slots

13.0

1134A-WC
1134A-WD

128Kb

4 Hex slots
2 Quad slots

15.0

1134A-XC
1134A-XD

128Kb t

4 Hex slots

10.0

1134A-YC
1134A-YD

256Kbt

4 Hex slots

10.0

1134A-ZC
1134A-ZD

256Kb

4 Hex slots
2 Quad slots

15.0

Small Box
MOS Memory

-23-

PDP-1134A

Core Memory
1134A-HC
1134A-HD

32Kb

2 Hex slots
3 Quad slots

13.0

1134A-JC
1134A-JD

64Kb

2 Hex slots
3 Quad slots

12.0

32Kbt

SU 1-2: 3 Hex slots,
1 Quad slot
SU 3-5:
3SUs

12.0

Large Box
MOS Memory
1134A-DE
1134A-DF

1134A-DH
1134A-DJ

1134A-LE
1134A-LF

1134A-LH
1134A-LJ

1134A-WE
1134A-WF

1134A-XE
1134A-XF

32Kb

64Kbt

64Kb

128Kb

128Kbt

SU 1-2: 3 Hex slots,
3 Quad slots
SU 3-5:
3SUs

SU 1-2: 2 Hex slots,
1 Quad slot
SU 3-5:
3SUs

SU 1-2: 2 Hex slots,
3 Quad slots
SU 3-5:
3SUs

SU 1-2: 4 Hex slots,
2Quad slot
SU 3-5:
3SUs

SU 1-2: 4 Hex slots
SU 3-5:
3SUs

32.0

15.0

32.0

8.0

32.0

13.0

32.0

15.0

32.0

10.0

32.0

1134A-YE
1134A-YF

256Kbt

SU 1-2: 4 Hex slots
SU 3-5:
3SUs

10.0

32.0

1134A-ZE
1134A-ZF

256Kb

SU 1-2: 4 Hex slots,
2 Quad slot
SU 3-5:
3SUs

15.0

32.0

t Includes a DL 11-W line frequency clock with serial line Interface and a KV11-LB programmers console.

-24-

Core Memory

32Kb t

1134A-HE
1134A-HF

1134A-HH
1134A-HJ

32Kb

SU 1-2: 2 Hex slots,
3 Quad slots
SU 3-5:
3SUs

64Kb t

1134A-JE
1134A-JF

1134A-JH
1134A-JJ

SU 1-2: 2 Hex slots,
1 Quad slot
SU 3-5:
3SUs

64Kb

SU 1-2: 2 Hex slots,
1 Quad slot
SU 3-5:
3SUs

SU 1-2: 2 Hex slots,
3 Quad slots
SU 3-5:
3SUs

8.0

32.0

13.0

32.0

7.0

32.0

12.0

$2.0

t Includes a DL 11-W line frequency clock with serial line interface and a KY11-L~ programmers console.

PDP-1134A Packaged Systems
Note 1. The power and bus loads for the floating point processor (FP11-A) and cache memory (KK11-A) options have already
been configured into the 1134A packaged systems. If these slots are not used for the FPP and cache memory, a Hex board
maybe inserted in each location.
Note 2. After the first fully supported system is purchased, PDP-1134A packaged systems are also available at unsupported and
license only software support levels. Shown here are the 120/60 and 240/50 fully supported systems. The other available power
variations appear in the Price List.

RT-11 Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

128Kb

RL01
RL01

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+5V

BUS
LOADS
AVAILABLE

2.7

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

MOS Memory
SR-30LLB-AA
SR-30LLB-AD

CPU
2 Hex slots
1 Quad slot
6 Hex slots,
SU 3-5:
1 Quad slots,
1 SU
SU 1-2:

LA38

22.4

(SR-30LLB-BA)
(SR-30LLB-BD)

(VT100)

(SR-30LLB-CA)
(SR-30LLB-CD)

(LA120)

SR-30SSB-AA
SR-30SSB-AD

128Kb

RX02
RX02

CPU
2 Hex slots,
1 Quad slot
7 Hex slots,
SU 3-5:
1 SU

SU 1-2:

2.7

LA38

25.9

(SR-30SSB-BA)
(SR-30SSB-BD)

(VT100)

(SR-30SSB-CA)
(SR-30SSB-CD)

(LA120)

-25-

.
t

{

·
"

·
'

, ..
<

c I

· · ,
~ 1~)

· ·.

.·
",'

,1' ' \

·
'

PDP 1134A

Core Memory
CR-30LLA-LA
CR-30LLA-LD

CR-30SSA-LA
CR-30SSA-LD

64Kb

RL01
RL01

64Kb

RX02
RX02

CPU
3 Hex slots,
1 Quad slot
SU 3-5:
3 Hex slots,
2 Quad slots
1 SU

4.5

SU 1-2:

LA36

17.7

CPU
3 Hex slots,
1 Quad slot
SU 3-5:
4 Hex slots,
1 Quad slot
1 SU
SU 1-2:

4.5
21.2

RSX-11 M Operating System
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

EXPANSION
SPACE

POWER

A ZABLE
~s@+SV
,.

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

,,;'i

MOS Memory
CPU
SM-30HHB-CA
SM-30HHB-CD

128Kb

RK07
RK07

SU 1-2:
SU 3-5:

SM-30UVB-CA
SM-30UVB-CD

256Kb

RM02
TE16

SU 1-2:

none
2 Hex slots,
1 SU

CPU
2 Hex slots,
1 Quad slot
SU 3-5:
7 Hex slots,
1 Quad slot,
1 SU

none
16.7

2.7

LA120

28.7
BA11-K

BA11-K
SU 1-2:
SU 3-5:

SM-30LLB-AA
SM-30LLB-AD

128Kb

RL01
RL01

none
1 SU

CPU
2 Hex slots
1 Quad slot
SU 3-5:
6 Hex slots,
1 Quad slot,
1 SU

SU 1-2:

none
11.7

2.7

LA38

22.4

(SM-30LLB-BA)
(SM-30LLB-BD)

(VT100)

(SM-30LLB-CA)
(SM-30LLB-CD)

(LA120)

SM-30MMA-AA
SM-30MMA-AD

256Kb

RL02
RL02

CPU
2 Hex slots
1 Quad slot
SU 3-5:
6 Hex slots,
1 Quad slot,
1 SU
SU 1-2:

2.7

LA38

22.4

(SM-30MMA- BA)
(SM-30MMA-BD)

(VT100)

(SM-30M MA- CA)
(SM-30MMA-CD)

(LA120)

-26-

CPU
SM-30UAA-CA
SM-30UAA-CD

256Kb

RM02
TS11

SU 1-2:
SU 3-5:

128Kb

RK07
RK07

SU 1-2:

none
1 Hex slots,
1 Quad slot

none
15.2

LA120

4.5

LA36

Core Memory
CM-30HHA-LA
CM-30HHA-LD

CPU
3-Hex slots,
1 Quad slot
SU 3-5:
2 Hex slots,
2 Quad slots,
1 SU

BA11-K
2 Hex slots,
1 Quad slot
SU 3-5:
3SU
SU 1-2:

CM-30LLA-LA
CM-30LLA-LD

64Kb

RL01
RL01

SU 1-2:
SU3-5

CPU
3 Hex slots,
1 Quad slot
3 Hex slots,
2 Quad slots,
1 SU

19
BA11-K

11.7
25

4.5

LA36

17.7

RSTS/E Operating System
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

EXPANSION
SPACE

SE-30HHB-CA
SE-30HHB-CD

256Kb

RK07
RK07

SU 1-2:
SU 3-5:

SE-30LLB-CA
SE-30LLB-CD

128Kb

RL01
RL01

SU 1-2:

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

none
16.7

LA120

2.7

LA120

OTHER
OPTIONS
INCLUDED

MOS Memory
CPU

SE-30MMA-CA:
SE-30MMA-CD

SE-30UVB-CA
SE-30UVB-CD

256Kb

RL02
RL02

RM02
TE16

none
2 Hex slots
1 SU

CPU
2 Hex slots
1 Quad slot
SU 3-5:
6 Hex slots
1 Quad slots
1 SU
CPU
2 Hex slots
1 Quad slot
6 Hex slots,
SU 3-5:
1 Quad slot,
1 SU

SU 1-2:

CPU
2 Hex slots
1 Quad slot
7 Hex slots
SU 3-5:
1 Quad slot
1 SU

SU 1-2:

22.4

2.7
22.4

2.7

none
1 SU

-27-

LA120

28.7
BA11-K

BA11-K
SU 1-2:
SU 3-4:

none
11.7

PDP-11/04 & PDP-1134A OPTIONS

PDP-11 /04 & PDP-1134A PROCESSOR OPTIONS
FP11-A

KE11-B

Floating point processor for the PDP-1134A. The FP11-A must mount in the third Hex slot, next to
processor. NOTE: The power and the bus loads for the FP11-A option have been configured
into the 1134A packaged systems.
PREREQUISITE: PDP-1134A system.
Mounting
Code

Power Drawn
Amps@+SV

1 Hex slot

7.0

Bus Loads
Drawn

System Software
RT-11, RSX-11 M,
RSTS/E

Extended Arithmetic Element (EAE). Provides extended manipulation of signed integer multiply
and divide, multiple shifts, and normalization.
PREREQUISITE: PDP-11 /04 system.
Mounting
Code

Power Drawn
Amps@+SV

1 Hex slot

4.0

Bus Loads
Drawn

System Software
RT-11, RSX-11 M,
RSTS/E

PDP~1134A MEMORY OPTION

KK11-A

Cache memory consisting of a 2K bytes high-speed random-access memory (RAM). NOTE: The
KK11-A must mount in the fifth Hex slot in the CPU backplane. NOTE: The power and bus loads
for the KK11-A option have been configured into the 1134A RL01, RM02, RX02 and RK07 based
system.
PREREQUISITE: PDP-1134A systems.
Mounting
Code

Power Drawn
Amps@+SV

1 Hex slot

4.0

Bus Loads
Drawn

PDP-11/04 & 1134A MOS MEMORY
MS11-FP

MS11-JP

MS11-LB

MS11-LD

16K bytes parity MOS memory with control. 700 nanoseconds cycle time. Requires M7850 for PDP11 /04 parity implementation.
PREREQUISITE: PDP-11/04 system.
Mounting
Code

Power Drawn
Amps@+SV

1 Hex slot

2.0

Bus Loads
Drawn

32K bytes MOS memory.
PREREQUISITE: PDP-11/04 or PDP-1134A system.
Mounting
Code

Power Drawn
Amps@+SV

1 Hex slot

2.0

Bus Loads
Drawn

128K bytes of parity MOS memory.
PREREQUISITE: PDP-1134A system.
Mounting
Code

Power Drawn
Amps@+SV

1 Hex slot

3.1

Bus Loads
Drawn

256K bytes of parity MOS memory.
PREREQUISITE: PDP-1134A system.
Mounting
Code

Power Drawn
Amps@+SV

1 Hex slot

3.1

-28-

Bus Loads
Drawn

PDP-11/04 & 1134A CORE MEMORY
MM11-DP

MM11-YP

32K bytes core memory.
PREREQUISITE: PDP-11 /04 or PDP-1134A system.

Mounting
Code

Power Drawn
Amps@+SV

2 Hex slots

3.0

Bus Loads
Drawn

64K bytes core memory.
PREREQUISITE: PDP-11/04 or PDP-1134A system.

Mounting
Code

Power Drawn
Amps@+SV

2 Hex slots

5.0

Bus Loads
Drawn

PDP-11/04 & PDP-1134A MEMORY OPTIONS
M7850

KY11-LB

H775-A

H775-CA
H775-CB

Parity control for memory on PDP-11/04 or PDP-1134A systems. One M7850 is required for each
DD11 that contains MM11-DP, MM11-YP or MS11-JP memory.
PREREQUISITE: PDP-11 /04 or PDP-1134A system.

Mounting
Code

Power Drawn
Amps@+SV

DBL slot

1.0

Bus loads
Drawn

Programmer's console for the PDP-11 /04 and PDP-1134A.

Mounting
Code

Power Drawn
Amps@+SV

1 Quad slot

Bus Loads
Drawn

Battery backup for MOS memory in a 5.25" (13.3 cm) BA 11-L chassis.
PREREQUISITE: PDP-11 /04 or PDP-1134A system.

Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

SM PAN

N/A

NIA

Battery backup for MOS memory in a 10.5" (26.5 cm) BA 11-K chassis.
PREREQUISITE: PDP-11 /04 or PDP-1134A system.

Mounting
Code

Power Drawn
Amps@+SV

Bus loads
Drawn

SM PAN

N/A

-29-

{

PDP-11744

PDP-11/44 PRODUCT OFFERINGS
All PDP-11/44 processors feature:
• 10 General Registers
• Three Processor Modes: Kernel, Supervisor, and User
• Separate Instruction Space and Data Space
• Memory Management and UNIBUS Map for up to 1Mb of memory support
• Automatic Diagnostic Bootstrap Loader
• Microprocessor-controlled ASCII console
• Full UNIBUS with vectored interrupts and Direct Memory Access (OMA) capability
• 8192 byte high speed cache memory buffer
• Line frequency clock
• Single line asynchronous EIA/CCITT interfaces
• TU58 serial line interface
PDP-11 /44s are packaged three ways:
•

•

Box/eve/

10.5in. H x 19.0in. W x 25.0in. D
(26.5cm H x 48.4cm W x 63.7cm D)
These 11 /44s include CPU and memory (expandable up to 1M bytes with MS11-Ml!) in a cabinet mountable chassis.
Kernel system
41.75in. H x 21.25in. W x 30in. D
(106cm H x 54.1cm W x 76.2cm 0)
These 11/44s include CPU, memory, TU58 DECtape II, and power controller in a cross products cabinet.
Packaged system
These systems include a Kernel system with operating system, mass storage and an LA 120 console terminal.

Advanced software is available including the RSX-11 M, RSX-11 M-PLUS and RSTS/E Operating Systems, also a wide range of
languages including COBOL-11, BASIC-11, BASIC-PLUS, BASIC-PLUS-2, FORTRAN IV, FORTRAN IV-PLUS, APL-11, CORAL,
and MACR0-11, plus a wide variety of utilities. These systems are complemented by powerful data management facilities
including: RMS-11 K, DATATRIEVE-11, DBMS-11. PDP-11/44 systems support DECnet.
Hardware options are available such as cables, expansion memories and peripheral devices.

PDP-11/44 BOX LEVEL CONFIGURATION

MODEL

MOS Memory
11/44-CA
11144-CB

MEMORY

EXPANSION
SPACE

256Kb

1 Hex slot
1 Quad slot
3SUs

POWER
AVAILABLE
AMPS
@+5V @+15V @·15V

49.7

2.95t

BUS
LOADS
AVAILABLE

2.95t

PDP-11/44 KERNEL CONFIGURATION

MODEL

MEMORY

EXPANSION
SPACE

POWER
AVAILABLE
AMPS
@+5V @+15V @·15V

MOS Memory
11X44-CA
11X44-CB

256 Kb

1 Hexslot
1 Quad slot
3SUs

49.7

2.95t

t Any current not used @ +15V or -15V is available for use @ +5V. The amount of this
additional current@ +5V is five times the sum of the unused +15V and -15V currents.
-30-

BUS
LOADS
AVAILABLE

OTHER
OPTIONS
INCLUDED

Dual TU58
H9642Cab

PDP-11/44 Packaged Systems
Note: After the first fully supported system is purchased, PDP-11 /60 packaged systems are also available at unsupported and
license only software support levels. Shown here are the 120/60 and 240/50 fully supported systems. The other available power
variations appear in the Price List.

RSX-11M Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

SM-40MMA-CA
SM-40MMA-CD

256Kb

RL02
RL02

SU 1-6:1 Quad
slot
3SUs

44.7

2.45t

SM-40HHA-CA
SM-40HHA-CD

256Kb

RK07
RK07

1-6:3 Hex
slots
2 Quad slots
1 SU

37.7

2.77t

2.55t

SM-40UAA-CA
SM-40UAA-CD

256Kb

RM02
TS11

SU 1-6:1 Quad
slot
1 SU

36.2

2.95t

2.55t

2
plus
RM02
Disk

LA120

SM-40MMB-CA
SM-40MMB-CD

256Kb

RL02
RL02

SU 1-6:1 Quad
slot
3SUs

37.4

2.45t

LA120
FP11-F

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

LA120

EXPANSION
SPACE

POWER
BUS
AVAILABLE
LOADS
AMPS
AVAILABLE
@+SV @+15V @·15V

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

MOS Memory
2

LA120

plus
RK07
Disk

RSX-11M-PLUS Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

EXPANSION
SPACE

POWER
BUS
AVAILABLE
LOADS
AMPS
AVAILABLE
@+SV @+15V @·15V

MOS Memory
SN-40UAA-CA
SN-40UAA-CD

256Kb

RM02
TS11

SU 1-6:1 Quad 36.2
slot,
1 SU

2.95t

2.55t

t Any current not used @ + 15V or -1 SV is available for use @ +5V. The amount of this
additional current@ +5V is five times the sum of the unused + 15V and -1 SV currents.
-31-

plus
RM02
Disk

PDP-11 /44 OPTIONS

RSTS/E Operating Systems
MODEL

MEMORY

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

LA120

2.55t

2
plus
RK07
Disk

LA120

SYSTEM
BACKUP
&LOAD
DEVICES

EXPANSION
SPACE

BUS
POWER
LOADS
AVAILABLE
AVAILABLE
AMPS
@+SV @+15V @·15V

RL02
RL02

SU 1-61Quad
slot
3SUs

44.7

2.45t

RK07
RK07

1 -6 :3 Hex
slots
2 Quad slots
1 SU

37.7

2.77t

MOS Memory
SE-40MMA-CA
SE-40MMA-CD

256Kb

SE-40HHA-CA
SE-40HHA-CD

256Kb

SE-40UAA-CA
SE-40UAA-CD

256Kb

RM02
TS11

SU 1-6:1 Quad
slot
1 SU

36.2

2.95t

2.55t

2
plus
RM02
Disk

LA120

SE-40UAB-CA
SE-40UAB-CD

512Kb

RM02
TS11

SU 1-6:1 Quad
slot
1 SU

21.9

2.95t

2.55t

2
plus
RM02
Disk

LA120
KE44-A
COBOL-11

Any current not used @ +15V or -15V is available for use @ +5V. The amount of this
additional current@ +5V is five times the sum of the unused + 15V and -15V currents.

PDP-11/44 PROCESSOR OPTIONS
KE44-A

Commercial Instruction Set (CIS) processor.
PREREQUISITE: PDP-11 /44 systems.
Mounting
Code

2 reserved slots
FP11-F

Power Drawn
Amps@+SV

Bus Loads
Drawn

9.6

N/A

Floating point processor for the PDP-11/44. 17 digits of precision. Performs hardware operations
on 32-bit and 64-bit floating point numbers as well as integer to floating point conversions.
Mounting
Code

1 reserved slot

Power Drawn
Amps@+SV

Bus Loads
Drawn

7.3

N/A

-32-

PDP-11/44 MEMORY
MS11-MB

256K bytes ECC MOS memory.
PREREQUISITE: PDP-11/44.
Mounting
Code

Power Drawn
Amps@+5V

1 reserved slot
MS11-MC

4.8

512K bytes ECC MOS memory.
PREREQUISITE: PDP-11 /44.
Mounting
Code
2 reserved slots

MS11-MD

Bus Loads
Drawn

Power Drawn
Amps@+5V

Bus Loads
Drawn

9.6

Power Drawn
Amps@+5V

Bus Loads
Drawn

14.4

768K bytes ECC MOS memory.
PREREQUISITE: PDP-11/44.
Mounting
Code
3 reserved slots

BATTERY BACKUP OPTION
H7750-BA(BD)

Battery backup for MS11-M ECC MOS memory. 5.5in (13.9cm) chassis.
PREQUISITE: PDP-11/44.
Mounting
Code

Power Drawn
Amps@+5V

Bus Loads
Drawn

SM PAN

N/A

-33-

: · . ·

} ,·: . ,

PDP-11 i60

· . .. . ,: . .

PDP-11/60 PRODUCT OFFERINGS
All PDP-11 /60 processors feature:
• Eight general-purpose registers
• Extended Instruction Set (EIS)
• Power fail/auto-restart
• MOS memory Battery Backup
• 4-level vectored interrupts
• Hardware memory management
• Direct memory access (OMA)
• Self-test diagnostic bootstrap
• Integral microcoded floating point instruction set
• Integral 2048 byte bipolar-cache memory buffer
PDP-11 /60s are packaged three ways:
• Hardware only systems
These 11 /60s include CPU, ECC MOS memory, battery back-up, bootstrap loader, programmers console and serial
line unit and line frequency clock. It is packaged in a BA 11-P box.
• Cabinet mounted hardware only systems
These 11 /60s include CPU, ECC MOS memory, battery back-up, bootstrap loader, programmers console, serial line
unit and line frequency clock. It is packaged in either a double-width low-boy cabinet or double-width high-boy cabinet.
• Packaged systems
These systems include CPU, ECC MOS memory, battery back-up, bootstrap loader, programmers console, serial line
unit and line frequency clock. It is packaged in either a double-width low-boy cabinet or double-width high-boy cabinet
and include an operating system, disk and choice of console termlnal.
Advanced software optionally available includes the RT-11, RSX-11 M, RSX-11 D, RSTS/E and IAS Operating Systems, FORTRAN
IV, FORTRAN IV-PLUS, BASIC, BASIC-PLUS-2, COBOL and APL programming languages; DECnet Communications Network
System; plus DIGITAL's RMS Record Management System. Optional hardware is also available such as the FP11-E floating point
processor, expansion ECC MOS memory, communications hardware and peripheral devices.

PDP-11/60 MINICOMPUTERS
MEMORY

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+5V

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

11/60-CA
11160-CB

64Kb

1 SU
1 Hex slot
1 Quad slot

NO CAB
(BA11-P)

11 /60-EA
11160-EB

128Kb

1 SU
1 Hex slot
1 Quad slot

NO CAB
(BA11-P)

11X60-CA
11X60-CB

64Kb

1 SU
1 Hex slot
1 Quad slot

H9601
(Low-Boy)

11X60-EA
11X60-EB

128Kb

1 SU
1 Hex slot
1 Quad slot

H9601
(Low-Boy)

11Y60-CA
11Y60-CB

64Kb

1 SU
1 Hex slot
1 Quad slot

H9600
(High-Boy)

11Y60-EA
11Y60-EB

128Kb

1 SU
1 Hex slot
1 Quad slot

H9600
(High-Boy)

MODEL

MOS Memory

-34-

PDP-11/60 Packaged Systems
Note: After the first fully supported system is purchased, PDP-11 /GO packaged systems are also available at unsupported and
license only software support levels. Shown here are the 120/GO and 240/50 fully supported systems. The other available power
variations appear in the Price List.

RT-11 Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

G4Kb

RL01
RL01

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

G.5

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

MOS Memory

SR-GOLLA-CA
SR-BOLLA-CD

CPU
1 Hex slot,
1 Quad slot
SU 4-5:
(space for
192Kb ECC MOS)
SU 6:
1 Hex slot,
2 Quad slots

SU 1-3:

LA120

dedicated
BA11-P
11.2

BA11-P

SU 1-2:
SU 3-4:
SU 5-G:

2SUs
2SUs
2SUs

25
25
15

RSX-11 M Operating Systems
MOS Memory
SM-GOLLA-CA
SM-BOLLA-CD

128Kb

RL01
RL01

CPU
1 Hex slot,
1 Quad slot
SU 4-5:
(space for
128Kb ECC MOS)
SU G:
1 Hex slot,
2 Quad slots

SU 1-3:

G.5

LA120

dedicated
BA11-P
10.7

BA11-P

SU 1-2:
SU 3-4:
SU 5-G:

MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

SM-GOH HA-CA
SM-BOHHA-CD

128Kb

RK07
RK07

2SUs
2 SUs
2 SUs

EXPANSION
SPACE

25
25
15

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

G.5

1
(High-Boy)

LA120

CPU
1 Hex slot,
1 Quad slot
(space for
SU 4-5:
128Kb ECC MOS)
SUG:
1 SU

SU 1-3:

BA11-P
2 Hex slots,
1 Quad slot
SU 3-4:
2SUs
2SUs
SU 5-G:

SU 1-2:

-35-

dedicated
BA 11-P
17

11.7
25
15

PDP-11/60

SM-SOHHB-CA
SM-60HHB-CD

128Kb

RK07
RK07

CPU
1 Hex slot,
1 Quad slot
SU 4-5:
(space for
128Kb ECC MOS)
SUS:
1 SU
SU 1-3:

BA11-P
2 Hex slots,
1 Quad slot
SU 3-4:
2SUs
SU 5-6:
2SUs
SU 1-2:

SM-SOUVB-CA
SM-60UVB-CD

128Kb

RM02
TE16

CPU
1 Hex slot,
1 Quad slot
SU 4-5:
(space for
128Kb ECC MOS)
SUS:
1 SU
SU 1-3:

S.5

LA120
(Low-Boy)

dedicated
BA11-P
17

11.7
25
15

6.5

LA120

dedicated
BA11-P
17

BA11-P
SU 1-2:
SU 3-4:
SU 5-6:

SM-60UAA-CA
SM-60UAA-CD

256Kb

RM02
TS11

none
none
2SUs

CPU
1 Hex slot,
1 Quad slot
SU 4-5:
none
SU6:
1 SU
SU 1-3:

none
none
15

6.5

LA120

none
16

BA11-P

BA11-P
SU 1-2:
SU 3-4:
SU 5-6:

none
1 Hex slot,
2 Quad slots
1 SU
2SUs

none
20.7
15

IAS Operating System
MOS Memory
SA-60UVC-LA
SA-60UVC-LD

256Kb

RM02
TE16

CPU
1 Hex slot,
1 Quad slot
SU 4-5:
none
SU6:
1SU
SU 1-3:

S.5
none
16

BA11-P
SU 1-2:
SU 3-4:
SU 5-6:

none
none
2SU

-36-

none
none
15

LA36

BA11-P

PDP· 11 /60 PROCESSOR OPTIONS
FP11-EA
FP11-EB

High-speed floating point processor for PDP-11 /60. 17 digits of precision. 46 instruction set similar
to integral floating point instruction set. Performs hardware operations on 32-bit and 64-bit floating
point numbers. 3.74 microsecond register-to-register double precision multiply.
Mounting
Code

Reserved
PDP-11 /60 slots
KU116-AB

KU116-AE

KU116-AT

KU116-AV

KU116-BB

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

Dedicated

N/A

RSX-11M, IAS

Extended Control Store option. Inch.ides control circuitry and sockets for up to 1.5K x 48-bits of
PROM or ROM (PROM and ROM memories are not supplied by DIGITAL).
Mounting
Code

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

Hexslot#1t

Dedicated

N/A

RSX-11M, IAS

User Control Store option. Includes 1Kx48-bits (plus parity) of RAM (WCS module), software tools
(micro-assembler, micro-loader, manual, and micro-debugger for use with RSX-11 M), documentation, RKOS media.
PREREQUISITE: Minimum system configuration of 128K bytes of memory.
Mounting
Code

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

Hex slot#1t

Dedicated

N/A

RSX-11M, IAS

User Control Store option. Includes 1Kx48-bits (plus parity) of RAM (WCS module), software tools
(micro-assembler, micro-loader, manual, and micro-debugger for use with RSX-11M), documentation, RK06 media.
PREREQUISITE: Minimum system configuration of 128K bytes of memory.
Mounting
Code

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

Hexslot#1t

Dedicated

N/A

RSX-11M, IAS

User Control Store option. Includes 1Kx48-bits (plus parity) of RAM (WCS module), software tools
(micro-assembler, micro-loader, manual, and micro-debugger for use with RSX-11 M), documentation, RK07 media.
PREREQUISITE: Minimum system configuration of 128K bytes of memory.
Mounting
Code

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

Hex slot#1t

Dedicated

N/A

RSX-11 M, IAS

Diagnostic Control Store option (Fault Isolator). Self-contained CPU diagnostics in ROM, and fault
directory.
Mounting
Code

Power Drawn
Amps@+5V

Bus Loads
Drawn

System Software

Hex slot#1t

Dedicated

N/A

Only one KU116 option can be mounted in Hex slot #1 at any given time.

EXPANSION HARDWARE
M9202

Unibus jumper module (mounts on DD11)

-37-

PDP-11/60 MEMORY
MS11-KE

64K bytes ECC MOS memory.
PREREQUISITE: MOS PDP-11 /60 system.
Mounting
Code

Reserved PDP-11 /60
slot
MS11-KF

Reserved PDP-11 /60
slot

Dedicated

N/A

Power Drawn
Amps@+SV

Bus Loads
Drawn

Dedicated

N/A

192K bytes ECC MOS memory (3 MS11-KE).
PREREQUISITE: MOS PDP-11/60 system.
Mounting
Code

Reserved PDP-11 /60
slot
MF11-WP

Bus Loads
Drawn

128K bytes ECC MOS memory (2 MS11-KE).
PREREQUISITE: MOS PDP-11 /60 system. ·
Mounting
Code

MS11-KG

Power Drawn
Amps@+SV

Bus Loads
Drawn

Dedicated

N/A

64K bytes parity core memory with expansion capability up to 128K bytes (by addition of MM11WP).
PREREQUISITE: Core PDP-11 /60 system.
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

7.3

2SUs
MM11-WP

64K bytes parity core memory. One per MF11-WP.
PREREQUISITE: Core PDP-11/60 system.
Mounting
Code

Power Drawn
Amps@+SV

MF11-WP
(with 64K bytes available)

Bus Loads
Drawn

6.1

CABINETS
H9600-AA
H9600-AB

Double width, high-boy expansion cabinet 47"W x 60"H x 30"D (119.4cm x 152.4cm x 76.2cm).
Includes three phase power control. Accomodates BA 11-P expansion box.
PREREQUISITE: PDP-11 system.

H9601-AA
H9601-AB

Double width, low-boy expansion cabinet 47"W x 50"H x 30"D (119.4cm x 127.0cm x 76.2cm).
Includes three phase power control. Accomodates BA 11-P expansion box.
PREREQUISITE: PDP-11 /60 system.

H9602-BA
H9602-BB

Single width, high-boy expansion cabinet 28"W x 60"H x 30"D (71.1cm x 152.4cm x 76.2cm).
Includes single phase power control. Accomodates BA 11-P expansion box.
PREREQUISITE: PDP-11/60 system.

H9603-BA
H9603-BB

Single width, low-boy expansion cabinet 28"W x 50"H x 30"D (71.1cm x 127.0cm x 76.2cm).
Includes single phase power control.
PREREQUISITE: PDP-11 /60 system.

H9603-CA

Single width, low-boy expansion cabinet 28"W x 50"H x 30"D (71.1cm x 127.0cm x 76.2cm).
without power control.
PREREQUISITE: PDP-11 /60 system.

-38-

PDP-11no PRODUCT OFFERINGS
All PDP-11 /70 processors feature:
• Sixteen general-purpose registers
• Extended Instruction Set (EIS)
• Power fail/auto-restart
• Variable stack overflow
• 4-level vectored priority interrupts
• Hardware memory management
• Multifunction ROM Bootstrap loader
• Direct memory access (OMA)
• Terminal controller
• Set of over 400 instructions
• Integral 2048 byte bipolar-cache memory buffer
• Up to 4Mb of memory
PDP-11 /70s are packaged two ways:
• Cabinet mounted hardware only systems
These 11 /70s include CPU, ECC MOS or parity core memory, serial line unit and line frequency clock and choice of
console terminal. It is packaged in two H960 cabinets.
• Packaged systems
These systems include CPU, ECC MOS memory, serial line unit and line frequency clock, operating system, disk,
dedicated magtape and console terminal.

Advanced software optionally available includes the RSX-11 M, RSX-11 M-PLUS, RSTS/E and IAS/RSX-110 operating systems,
FORTRAN, FORTRAN IV PLUS, BASIC, COBOL and APL programming languages, DECnet, and DIGITAL's RMS and DBMS Data
Management Products System. There is a wide range of compatible options such as the FP11-C floating point processor,
expansion ECC MOS memory, and communications hardware.

PDP-11/70 MINICOMPUTERS
MODEL

MEMORY

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+5V

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

128Kb

3 Hex slots
1 Quad slot

3.2

2 H960s

512Kb

3 Hex slots
1 Quad slot

3.2

2 H960s

128Kb

3 Hex slot
1 Quad slot

3.2

2 H960s

MOS Memory

11/70-VK
11170-VL

11170-AA
11170-AB

Core Memory

11170-VA
11170-VB

-39-

PDP-11/70 PACKAGED SYSTEMS
Note: After the first fully supported system is purchased, PDP-11 /70 packaged systems are also available at unsupported and
license only software support levels. Shown here are the 120/60 and 240/50 fully supported systems. The other available power
variations appear in the Price List.
IAS Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

EXPANSION
SPACE

SA-70TVC-CA
SA-70TVC-CD

512Kb

RWM03
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SA-70CVC-CA
SA-70CVC-CD

1024Kb

RWP06
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

OTHER
OPTIONS
INCLUDED

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

3.2

LA120

3.2

LA120

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

3.2

LA120

3.2

LA120

MOS Memory

RSTS/E Operating Systems
MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

SE-70TVB-CA
SE-70TVB-CD

512Kb

RWM03
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SE-70CVB-CA
SE-70CVB-CD

1024Kb

RWP06
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

MODEL

EXPANSION
SPACE

OTHER
OPTIONS
INCLUDED

MOS Memory

-40-

RSX-11 M Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

EXPANSION
SPACE

SM-70TAA-CA
SM-70TAA-CD

512Kb

RWM03
TS11

CPU
2 Hex slots,
1 Quad slot
3 MASSBUS PORTS

SM-70TVB-CA
SM-70TVB-CD

512Kb

RWM03
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SM-70TVC-CA
SM-70TVC-CD

512Kb

RWM03
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SM-70TBA-CA
SM-70TBA-CD

512Kb

RWM03
TWU77

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SM-70CAA-CA
SM-70CAA-CD

512Kb

RWP06
TS11

CPU
2 Hex slots,
1 Quad slot
3 MASSBUS PORTS

SM-70CVA-LA
SM-70CVA-LD

256Kb

RWP06
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SM-70CVB-CA
SM-70CVB-CD

1024Kb

RWP06
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SM-70CVC-CA
SM-70CVC-CD

1024Kb

RWP06
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SM-70CBA-CA
SM-70CBA-CD

1024Kb

RWP06
TWU77

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

1.7

1 DWHB
1 SWHB

LA120

3.2

3 H960s

LA120

3.2

1 DWHB
1 SWHB

LA120

3.2

1 DWHB
1 SWHB

LA120

1.7

1 DWHB
1SWHB

LA120

3.2

3 H960s

LA36

3.2

3 H960s

LA120

3.2

1 DWHB
1 SWHB

LA120

3.2

1 DWHB
1 SWHB

LA120

OTHER
OPTIONS
INCLUDED

MOS Memory

Note: TU77 will ship 208-240v Single Phase 50/60Hz

-41-

RSX-11 M·PLUS Operating Systems
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

EXPANSION
SPACE

SN-70TAA-CA
SN-70TAA-CD

512Kb

RWM03
TS11

CPU
2 Hex slots,
1 Quad slot
3 MASSBUS PORTS

SN-70TVA-CA
SN-70TVA-CD

512Kb

RWM03
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SN-70TBA-CA
SN-70TBA-CD

512Kb

RWM03
TWU77

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SN-70CAA-CA
SN-70CAA-CD

512Kb

RWP06
TS11

CPU
2 Hex slots,
1 Quad slot
3 MASSBUS PORTS

SN-70CVA-CA
SN-70CVA-CD

1024Kb

RWP06
TWE16

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

SN-70CBA-CA
SN-70CBA-CD

1024Kb

RWP06
TWU77

CPU
3 Hex slots,
1 Quad slot
2 MASSBUS PORTS

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

1.7

fDWHB
1 SWHB

LA120

3.2

1 DWHB
1 SWHB

LA120

3.2

1 DWHB
1 SWHB

LA120

1.7

1 DWHB
1 SWHB

LA120

3.2

1 DWHB
1 SWHB

LA120

3.2

1 DWHB
1 SWHB

LA120

OTHER
OPTIONS
INCLUDED

MOS Memory

Note: TU77 will ship 208-240v Single Phase 50/60Hz

PDP-11/70 PROCESSOR OPTION
FP11-C

High performance floating point processor for PDP-11 /70. Performs hardware operations on 32-bit
and 64-bit floating point numbers as well as Integer to floating point conversions.
PREREQUISITE: PDP-11 /70 systems.
Mounting
Code
Reserved
PDP-11 /70 slots

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

Dedicated

N/A

RSX-11 M, RSX-11 M-PLUS,
RSTS/E, IAS

-42-

PDP-11/70 MEMORY
Note: MK11-B and MK11-E options utilize 4K ECC MOS RAM memory arrays and MK11-C and MK11-F options utilize 16K ECC
MOS RAM memory arrays. MK11-B and MK11-C memory arrays can be mixed in the same memory box.
Expansion ECC MOS memory for ECC MOS systems

MK11-BA
MK11-BB

128K byte ECC MOS memory including box, power supplies, control, and battery back-up. Expandable to a total of 1024K bytes per box by addition of 7 MK11-BEs; or 1 MK11-BF and 3 MK11BEs. Mounts in memory cab.
PREREQUISTE: PDP-11/70 system.

MK11-BC
MK11-BD

MK11-BA(BB) mounted in a H960 cabinet.
PREREQUISTE: PDP-11170 system.

MK11-BE

128K byte ECC MOS expansion memory. Mounts in MK11-BA(BB).
PREREQUISITE: PDP-11 /70 system with MK11-BA(BB).

MK11-BF

512K byte ECC MOS expansion memory. (4 MK11-BE)
PREREQUISITE: PDP-11/70 system with MK11-BA(BB).

MK11-BG
MK11-BH

1Mb ECC MOS memory including box, power supplies, control, and battery back-up. Mounts in
memory cab.
PREREQUISTE: PDP-11 /70 system.

MK11-BJ

1Mb ECC MOS expansion memory.
PREREQUISITE: PDP-11170 system.

MK11-CA
MK11-CB

512K byte ECC MOS memory including box, power supplies, control, and battery backup. Expandable to a total of 3.5 megabytes by addition of 6 MK11-CEs. Mounts in memory cab.
PREREQUISITE: PDP-11170.

MK11-CC
MK11-CD

MK11-CA (CB) mounted in a H960 cabinet.
PREREQUISTE: PDP-11/70 system.

MK11-CE

512K byte ECC MOS expansion memory. Mounts in MK11-CA(CB).
PREREQUISITE: MK11-CA(CB)

MK11-CF

1024K byte ECC MOS expansion memory (2 MK11-CEs). Mounts in MK11-CA(CB).
PREREQUISITE: MK11-CA(CB)

MK11-CG
MK11-CH

1Mb ECC MOS memory including box, power supplies, control, and battery back-up. Mounts in
memory cab.
PREREQUISTE: PDP-11/70 system.

-43-

Core to ECC MOS RECONFIGURATION KIT

MK11-UA

This option includes all the necessary hardware for H960 cabinet conversion from Core to ECC
MOS. Note that no memory comes with this kit. ECC MOS memory boxes replace Core memory
boxes in the cabinet. Either MK11-B or MK11-C memory boxes are required for complete conversion.

Expansion ECC MOS memory for Core systems
Note: MK11-E and MK11-F expansion memory includes the hardware necessary to mix ECC MOS
and Core memory boxes in Core cabinets. An MK11-UA is not required.

MK11-EA
MK11-EB

128K byte ECC MOS memory unit, includes box, power supplies, and control. Also includes battery
back-up in the memory cabinet. Expandable to a total of 1024K bytes per box by addition of 7
MK11-BE; or 1 MK11-BF and 3 MK11-BE. Mounts in memory cab.
PREREQUISTE: Core PDP-11170 system.

MK11-EC
MK11-ED

MK11-EA(EB) mounted in a H960 cabinet.
PREREQUISTE: Core PDP-11170 system.

MK11-FA
MK11-FB

512K byte ECC MOS memory including box, power supplies, control, and battery backup. Expandable to a total of 3.5 megabytes by addition of 6 MK11-CEs. Mounts in memory cab.
PREREQUISITE: Core PDP-11170.

Expansion Core memory for Core systems

MJ11-BA
MJ11-BB

12BK byte parity Core memory unit, includes box, power supplies, and control. Expandable to a
total of 512K bytes by addition of 3 MJ11-BE. Mounts in memory cab.
PREREQUISITE: PDP-11 /70 system.

MJ11-BE

128K byte parity expander Core memory. Mounts in MJ11-BA(BB).
PREREQUISITE: PDP-11170 system with MJ11-BA(BB).

MJ11-BC
MJ11-BD

512K byte parity Core memory system. Includes cabinet, power supplies, and control. Expansion
space in box for a total of 1024K bytes by addition of 1 MJ11-BG (or MJ11-BA and 3 MJ11-BE's).
PREREQUISITE: PDP-11170 system.

M9301-YC

ROM bootstrap and basic CPU, cache and memory diagnostic tests.
Mounting
Code

Power Drawn
Amps@+5V

1 Double slot

-44-

Bus Loads
Drawn

VAX-11/780 PRODUCT OFFERINGS
All VAX-11/780 processors feature:
• Virtual memory management
• Standard instructions for packed decimal
• Floating and fixed point arithmetic
• Character and string manipulations
• 8K byte parity bipolar cache memory
• High precision programmable real-time clock
• Time-of-year clock (with battery backup)
• Integral diagnostic console subsystem consisting of: LSl-11 with 16K bytes read/write memory and 8K bytes
read only memory to which an RX01 floppy disk and the hardcopy terminal are connected
• 12Kb Writable Diagnostic Control Store
VAX-111780s are packaged two ways:
• Cabinet mounted hardware only system
These 11 /780s include CPU, ECC MOS memory, UNIBUS adapter and the diagnostic console subsystem. It
is packaged in a Double-width high-boy cabinet.
• Packaged systems
These systems include VMS Operating System, CPU, ECC MOS memory, one UNIBUS expansion cab, disk
and diagnostic console subsystem.

Optional hardware is available such as the FP780 floating point accelerator, WCS, battery back-up for memory,
expansion ECC MOS memory, multiport memory, additional UNIBUS adapters, communications hardware and peripheral devices. Also a full complement of languages and communications software is optionally available.

VAX-11/780 HARDWARE SYSTEM
MODEL

11 /780-CP
111780-CT

MOS
MEMORY

256Kb

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+SV

UNIBUS
LOADS
AVAILABLE

CABINETS
INCLUDED

CONSOLE
TERMINAL

N/A

H9600
(High-Boy)

LA120

CPU
Reserved space for:
FP780-AA(AB)
KU780
3,840K bytes memory
2 MBAs or 2 UBAs,
or 1 of each
H7112-A(B)

-45-

\IAX-11 /180

VAX-11/780 PACKAGED SYSTEMS
Note: The following packaged systems include DIGITAL installation and support for VMS operating system. Customer's with a
DIGITAL supported VMS system may purchase additional VMS systems without DIGITAL installation and support. Unsupported
systems appear in the price list.
MODEL

MEMORY

SYSTEM
BACKUP
&LOAD
DEVICES

512KB

RK07
RK07

EXPANSION
SPACE

POWER
AVAILABLE
Amps@+SV

BUS
LOADS
AVAILABLE

CABINETS
INCLUDED

OTHER
OPTIONS
INCLUDED

MOS Memory
SV-AXHHB-CA
SV-AXHHB-CD

CPU
Reserved space for:
FP780-AA(AB)
KU780
3,584K bytes memory
2 MBAs or 2 UBAs,
or 1 of each
H7112-A(B)
BA11-K
SU 1-2:2 Hex slots,
Quad slot
SU 3-5:6 Hex slots, 2
Quad slots
1 SU

SV-AXTVB-CA
SV-AXTVB-CD

512KB

SV-AXTBA-CA
SV-AXTBA-CD

RM03
TE16
RM03
TU77

CPU
Reserved space for:
FP780-AA(AB)
KU780
3,584K bytes memory,
H7112-A(B)
BA11-K
SU 1-2:6 Hex slots, 2
Quad slot
SU 3-5:3 SUs

SV-AXCVB-CA
SV-AXCVB-CD
SV-AXCBA-CA
SV-AXCBA-CD

1 MB

RP06
TE16
RP06
TU77

CPU:
Reserved space for:
FP780-AA(AB)
KU780
3,072K bytes memory
H7112-A(B)

SU 1-2:

BA11-K:
6 Hex slots
2 Quad slots

SU 3-5:3 SUs

DZ11-A
D011-DK
BA11-K

13
21.5

-46-

LA120

N/A
DZ11-A
D011-DK
BA11-K
21.5
25.0

LA120

N/A
OZ11-A
DD11-DK
BA11-K
21.5

25.0

Note: TU77 will ship 208-240v Single Phase 50/60Hz

LA120

N/A

VAX-11/780 PROCESSOR OPTIONS
FP780-AA
FP780-AB

High-performance floating-point accelerator for single- and double-precision floating-point instructions plus POLY, EMOD and MULL. Power supply included.
PREREQUISITE: VAX-11/780 system.
Mounting
Code

Prewired CPU slots

KU780-YY

Prewired CPU slots

System Software

N/A

VAX/VMS

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

N/A

None

UNIBUS Adapter for connecting additional UNIBUSes to the VAX-111780 backplane (SBI). A maximum of four UNIBUSes may be configured in a system. The DW780 requires one Option Panel
Space within the CPU or CPU expansion cabinet (H9602-HA/HB). UNIBUS options are cofigured in
BA 11-K boxes within UNIBUS expansion cabinets (H9602-DF(DH)), which are not included with the
DW780.
PREREQUISITE: VAX-11/780 system.
Mounting
Code

H9602-HA(HB)

DR780-AA
DR780-AB

Bus Loads
Drawn

12K byte writable control store. Includes MICR0-2 assembler, loader, define file, data path description, and microcode source listing on microfiche.
PREREQUISITE: VAX-11/780 system.
Mounting
Code

DW780-AA
DW780·AB

Power Drawn
Amps@+SV

Power Available
Amps@+SV

Bus Loads
Available

N/A

High performance 32-bit parallel general purpose interface for the VAX-11/780. The DR780 requires one Option Panel Space within the CPU or CPU expansion cabinet (H9602-HA/HB).
PREREQUISITE: VAX-111780 system.
Mounting
Code

H9602-HA(HB)

Power Available
Amps@+SV

Bus Loads
Available

N/A

EXPANSION MEMORY FOR VAX-11/780 SYSTEMS
MS780-CC
MS780-CD

512K byte ECC MOS, 16K chip memory with controller. Expandable to a total of four million bytes
with the addition of MS780-Ds. This option can be ordered for expansion beyond four million bytes
of CPU cabinet-mounted memory to a VAX-11/780 system total of eight million bytes. Two MS780
memory controllers, with equal amounts of memory can be interleaved to improve 1/0 throughput.
One MS780-CC(CD) is included with each VAX-111780 packaged system to accommodate the first
four million bytes of memory. The second MS780-C requires two Option Panel Spaces in the CPU
Expansion Cabinet (H9602-HA(HB)).
Mounting
Code

H9602-HA/HB

NOTE:

MS780-D

Power Drawn
Amps@+SV

Bus Loads
Drawn

N/A

memory expansion units cannot be mixed with MS780-B units on the same controller.

-47-

VAX.-11 /780 OPTIONS

MS780-DA

256K byte ECC MOS expansion memory for MS780-CC(CD).

MS780-DB

512K byte ECC MOS expansion memory for MS780-CC(CD).

MS780-DC

1,024K byte ECC MOS expansion memory for MS780-CC(CD).

MS780-DD

2,048K byte ECC MOS expansion memory for MS780-CC(CD).

H7112-A
H7112-B

MOS memory battery backup. Powers up to four million bytes of MS780-D memory for at least 10
minutes, or less memory for longer than 1O minutes.

NOTE:

MS780-AA(AB) memory and controller has been replaced by MS780-CC(CD).

VAX-11/780 MULTIPORT MEMORY OPTIONS
The MA780 Multiport Memory is a bank of ECC MOS memory which can be shared by up to four VAX-11/780 systems for highthroughput and high-availability in real-time applications. Each system can randomly access all shared memory in exactly the
same way that a single CPU system accesses its local memory. Any information stored in the Multiport Memory is also
immediately accessible to the other VAX-11 /780 systems.
Each MA780 can be expanded from a minimum of 256K bytes to a maximum of 2 megabytes of shared memory. This is in
addition to the 8 megabyte maximum of local memory for each VAX-11 /780 system. There can be two MA 780s connected to
each CPU. Therefore, a single VAX-11/780 can directly address up to 12 megabytes of physical memory.
MA780-AA
MA780-AB

256K byte multiport ECC MOS memory subsystem. Includes controller, two port interfaces, cabinet, power supply, expansion space for up to 2 megabytes ECC MOS memory, and an MA780BA(BB) subsystem.

MA780-BA
MA780-BB

Additional MA780 Multiport Memory subsystem. Includes controller, 256K bytes ECC MOS memory, two port interfaces, power supply and expansion space for up to 2 megabytes ECC MOS
memory.
PREREQUISITE:MA780-AA(AB)

MA780-C

MA780 Multiport memory port interface. One required for third or fourth VAX-11/780 CPU connected to either MA780-A or MA780-B.
PREREQUISITE: MA780-AA(AB) or MA780-BA(BB)

NOTE: The MS780-AA or MS780-BA can be expanded up to 2 MBytes of memory by the addition
of MS780-D array modules.

VAX-11/780 CPU EXPANSION CABINET
H9602-HA
H9602-HB

Single-width, high-boy expansion cabinet. 60"(H) x 28"(W) x 30"(0) (152.4cm x 71.2cm x 76.2cm).
Provides four Option Panel Spaces for additional memory, UBAs, and MBAs. The MS780 memory
controller requires two Option Panel Spaces. Each MBA or UBA requires one Option Panel Space.
The CPU Expansion Cabinet also includes space for one H7112-A(B) memory battery backup
option. A maximum of two H9602-HA(HB) CPU expansion cabinets on a system.

VAX-11/780 UNIBUS EXPANSION CABINET
H9602-DF
H9602-DH

Single-width high-boy UNIBUS expansion cabinet with single phase power control. 60" H x 28" W x
30" D (152.4cm H x 71.2cm W x 76.2cm D). Provides space for two BA 11-K boxes and three DZ11
distribution panels.

-48-

INTRODUCTION TO OEM COMMON HARDWARE
The following section is a summary of processor options, mass storage devices and other peripherals available
from DIGITAL which are fully supported by each PDP-11 ~ystem and VAX systems as indicated.
Each option described in the summary contains the following information:

Option Number
The first entry is the order number for the option, with 120 Vac, 60 cycle power. If a different option number is used
for 240 Vac, 50 cycle power, it is shown immediately below in italics.
The basic features and specifications of each option are included in the description. More complete hardware and
software descriptions can be found in option bulletins, handbooks, and Software Product Descriptions.

Mounting Code
The mounting code indicates how the option mounts into the system.
CAB
Cabinet mounted.
FS
Free standing unit.
TT
Table top unit.

PDP-11 /03 PAN
PAN
SM PAN

Panel mounted. Front panel height is 3112 inches (8.89cm).
Panel mounted. Front panel height is 10112 inches (26.7cm).
Small panel. Front panel height is 5114 inches (13.3cm).

LSl-11 Double slot Space in pre-wired backplane which will accept a 5.2185 inch (13.255cm)
high module for PDP-11 /03 systems.
LSl-11 Quad slot
Space in a pre-wired backplane which will accept a 10.437 inch (26.510cm)
high module for PDP-11 /03 systems.
DBL Slot
Space in a pre-wired backplane which will accept a 5.2185 inch (13.255cm)
high module.
Quad slot
Space in pre-wired backplane which will aceept a 10.437 inch (26.510cm)
high module for UNIBUS system.
Hex slot
Space in pre-wired backplane which will accept a 15.604 inch (39.634cm)
high module for UNIBUS system.

QUAD
MODULE

HE;X

8.5"
(21.59 cm)

MODULE

8.5"
(21.59 cm)

-49-

INTRODUCTION

System Unit. Unit of space in chassis for mounting pre-wired backplane(s)
which can accept Hex- or Quad-sized modules.

BACKPLANE: DD11·D

BACKPLANE: DD11-C

II I

1 V7Lil".,; 7LZ2Lj

QUAD

2
3

HEX
HEX
HEX
HEX
HEX

5
6
7
8
9

MASSBUS Port

HEX

~ r7ZZZ

QUAD

Unit of expansion space in PDP-11170 processor box reserved for connection of highspeed peripheral options.

MBA

MASSBUS adapter

UBA

UNIBUS adapter

Power Drawn Amps
Current drawn from system @+5Vor@+5V, @+15V, @-15V.

Power Available Amps@+SV
Current available for system expansion @+5V.

Bus Loads Drawn
The number of loads the option puts on the UNIBUS. There can be a total of 20 bus loads or 50 feet (15.2cm) of
UNIBUS cable before a Bus Repeater, DB11, is needed.

System Software
This column refers to the operating system which supports the subsystem as both the system device and/or file
oriented device.

-50-

EXPANSION MOUNTING HARDWARE
SYSTEM UNIT EXPANSION BACKPLANES
0011-CK

Expansion backplane mounting unit for BA11-K or BA11-L. Accommodates 2 Hex and 2 Quad
modules. Mounts in 1 SU.
PREREQUISITE: UNIBUS POP-11 or VAX systems.

0011-CF

Expansion backplane mounting unit for BA11-P, BA11-F, H960-0H. Accommodates 2 Hex and 2
Quad modules. Mounts in 1 SU.
PREREQUISITE: UNIBUS POP-11 system.

0011-0K

Expansion backplane mounting unit for BA11-K, BA11-L. Accommodates 7 Hex and 2 Quad
modules. Mounts in 2 SUs.
PREREQUISITE:UNIBUS POP-11 or VAX systems.

0011-0F

Expansion backplane mounting unit for BA11-p, BA11-F, H960-0H. Accommodates 7 Hex and 2
Quad modules. Mounts in 2 SUs.
PREREQUISITE: UNIBUS POP-11 system.

EXPANSION BOXES
BA 11-KE
BA11-KF

Rack mountable expansion box. 10.50" H x 19" W x 25" 0, (26.67cm H x 48.33cm W x 63.5cm 0)
Provides mounting space for 5 system units. (Compatible with 0011-CK/OK.) Power supply is also
provided.
PREREQUISITE: POP-11 system (except POP-11/60, POP-11/03 and POP-11/23 systems).

Mounting
Code
PAN

Power Available
Amps
@+SV @+15V @-15V
50.0

BA11-KW
BA11-KX

NIA

10.0

Rack mountable expansion box with bezel for use with H9642 or H9602. 10.50" H x 19" W x 25" 0,
(26.67cm H x 48.33cm W x 63.5cm 0) Provides mounting space for 5 system units. (Compatible
with 0011-CK/OK.) Power supply is also provided.
PREREQUISITE: POP-11 system mounted in H9642 or H9602.

Mounting
Code
PAN

Power Available
Amps
@+SV @+15V @-15V
50.0

BA11-LE
BA11-LF

4.0

Bus Loads
Drawn

4.0

Bus Loads
Drawn

N/A

10.0

Rack mountable expansion box. 5.25" H x 19" W x 25" 0, (13.33cm H x 48.33cm W x 63.5cm 0)
Provides mounting space for 2 system units. (Compatible with 0011-CK/OK.) Power supply is also
provided.
PREREQUISITE: POP-11 system (except POP-11/60, POP-11/03 and POP-11 /23 systems).

Mounting
Code

Power Available
Amps@+SV

Bus Loads
Drawn

SM PAN

32.0

N/A

-51-

MOUNTING HARDWARE

BA 11'-PE
BA 11-PF

Rack mountable expansion box. 24.5" H x 15.75" W x12" D, (62.23cm H x 40cm W x 30.78cm D)
Provides mounting space for 6 system units. (Compatible with 0011-CF/DF.) Power supply is also
provided.
PREREQUISITE: PDP-11/60 system.
Mounting
Code

Power Available
Amps@+SV

Bus Loads
Drawn

65.0

N/A

PDP-11 /60 CAB

BA11-FE
BA 11-FF

Rack mountable expansion box. 21" H x 19" W x 25" D, (52.5cm H x 48.33cm W x 63.50cm D)
Provides mounting space for 9 system units. (Compatible with 0011-CF/DF.) Power supply is also
provided.
PREREQUISITE: PDP-11/60 system.
Mounting
Code

Power Available
Amps@+SV

Bus Loads
Drawn

65.0

N/A

PDP-11 /60 CAB

UNIBUS REPEATER
DB11-A

UNIBUS repeater. Allows an additional 19 unit loads and an additional 50 ft. (15.2rn) of UNIBUS
cable to be added.
PREREQUISITE: UNIBUS PDP-11 or VAX systems.
Mounting
Code

Power Available
Amps@+SV

Bus Loads
Drawn

2.2

CABLES
BC11A-XX

The following lengths of cable are available for UNIBUS extension hardware: 2 ft. (0.6m), 5
ft.(1.5m), 8'12ft. (2.6m), 10ft.(3m), 15ft. (4.5m), 25ft. (7.6m).
PREREQUISITE: UNIBUS PDP-11 or VAX systems.

CORPORATE CABINETS
H9602-CC
H9602-CD

Single width, high-boy expansion cabinet 28"W x 60"H x 30"0 (71.1 cm x 152.4cm x 76.2cm).
Includes power control, stabilizers, slide mounts and casters.
PREREQUISITE: PDP-11 system.

H9600-AA
H9600-AB

Double width, high-boy expansion cabinet 47"W x 60"H x 30"0 (119.4cm x 152.4cm x 76.2cm).
Includes three phase power control. Accomodates BA 11-P expansion box.
PREREQUISITE: PDP-11 system.

STANDARD PDP-11 CABINETS
H960-CA
H960-CB

Standard PDP-11 CPU cabinet 72"H x 21"W x 31"0 (182.Scm x 53.3cm x 76.2crn). Includes fans,
power distribution panel, extension feet, front bezel panels, and end panels.

-52-

H960-CF
H960-CG

Standard PDP-11 expansion cabinet without end panels 72"H x 21"W x 31"D (182.8cm x 53.3cm x
76.2cm). Includes fans, power distribution panel, extension feet, and front bezel panels.
PREREQUISITE: H960 based system.

H960-DH
H960-DJ

Cabinet with a single sliding expansion mounting chassis 72"H x 21"W x 31"D (182.8cm x 53.3cmx
76.2cm). Provides BA11-F box with 9 system units of mounting space. Includes fans, power distribution panel, extension feet, and front bezel panels. Also a power supply which provides 3 (+5V)
regulators (75 Amps).
PREREQUISITE: H960 based system.

H952-AA
H952-AB

End panel for H960-CA, CB cabinet.

H961-A

Free-standing equipment mounting cabinet 72"H x 21"W x 30"D (182.8cm x 53.3cm x 76.2cm).
Includes fans and front bezel panels.

H9640 SERIES CABINETS
H9642-BD
H9642-BE

40" (101.6cm) top loading expansion cabinet for RL01/RL02. Provides 24.5" vertical mounting
space beneath RL01 /RL02. Includes power control.

H9642-DB
H9642-DC

40" (101.6cm) expansion cabinet without end panels. Mounts next to PDP-11 /44 CPU cabinet.
Provides 35" vertical mounting space. Includes 872 power control. Accepts BA 11-KW(KX) box.

READ ONL V MEMORY BOOTSTRAP LOADER
MR11-EA

Bootstrap/Diagnostic/Terminator option. The MR11-EA module contains a complete set of UNIBUS termination resistors along with 512K words of read-only-memory for diagnostic routines, the
console emulator routine, and for bootstrap programs. Five sockets on the MR11-EA allow interchange of ROMs, enabling use of the module with any UNIBUS PDP-11, and booting from any
peripheral device by adding or changing ROMs. Includes separate package of 23 ROM chips.
Mounting
Code

Power Drawn
Amps@+SV

DBL

2.0

-53-

Bus Loads
Drawn

MASS STORAGE

NOTE: Average Access Time is defined as the sum of the average seek time plus the average latency.

LSl-11 FLOPPY DISK SUBSYSTEMS
RXV11-BA
RXV11-BD

Single density, dual drive, 512K bytes floppy disk drive (RX01) and controller. 263 milliseconds
average access time. 18 microsecond/byte transfer rate.
PREREQUISITE: PDP-11 /03 or PDP-11 /23 systems.

Mounting
Code
PAN
LSl-11 Double slot
RXV21-BA
RXV21-BD

Bus Loads
Drawn

Power Drawn
Amps@+SV

System Software
RT-11

1.5
(interface)

Double density, dual drive, 1 Mb floppy disk drive (RX02) and controller. 61 K bytes per second
peak transfer rate (includes 2 sector interleaving), 263 millisecond average access time.
PREREQUISITE: PDP-11 /03L, PDP-11 /03 or PDP-11 /23 systems with a BDV11-AA bootstrap
loader.

Mounting
Code

Power Drawn
Amps@+5V

Bus Loads
Drawn

RT-11, RSX-11 M

2.2

PAN
LSl-11 Double slot

System Software

LSl-11 CARTRIDGE DISK SUBSYSTEMS
RLV11-AK

5.0 Mb, RL01 cartridge disk drive and controller.
PREREQUISITE: PDP-11 /03L or PDP-11 /23 systems.

Mounting
Code

System Software
RT-11, RSX-11 M

6.5

PAN
2 LSl-11 Quad slots
RLV21-AK

Bus Loads
Drawn

Power Drawn
Amps@+SV

10.4 Mb RL02 removable cartridge disk drive and controller.
PREREQUISITE: PDP-11 /03L, PDP-11 /23.

Mounting
Code

Bus Loads
Drawn

Power Drawn
Amps@+SV

RT-11, RSX-11M

6.5

2 LSl-11 Quad slots

System Software

UNIBUS FLOPPY DISK SUBSYSTEMS
RX11-BA
RX11-BD

RX211-BA
RX211-BD

Single density, dual drive, 512K bytes floppy disk drive (RX01) and controller. 31 K bytes per
second peak transfer rate (including 2 sector interleaving), 263 millisecond average access time.

Mounting
Code

Power Drawn
Amps@+SV

Quad slot
PAN

1.5

Bus Loads
Drawn

System Software
RT-11, RSX-11 M

Double density, dual drive, 1 Mb floppy disk drive (RX02) and controller. 31 K bytes per second
peak transfer rate (including 2 sector interleaving), 263 millisecond average access time.

Mounting
Code

Power Drawn
Amps@+SV

Quad slot
PAN

1.5

Bus Loads
Drawn

System Software
RT-11, RSX-11M,
RSTS/E

-54-

UNIBUS CARTRIDGE DISK SUBSYSTEMS
RL 11-AK

5.0 megabyte removable cartridge disk drive and controller. Expandable to a total of four single
access RL01 drives. (A maximum of two RL 11-AK controllers per system.)
Mounting
Code
PAN
1 Hex slot

RL211-AK

1 Hex slot
PAN

2SUs
FS Drive

Power Drawn
Amps
@+SV @+15V @-15V
5.0

0.5

Bus Loads
Drawn

System Software
RSX-11 M, RSX-11 M-PLUS,
RSTS/E

0.5

Power Drawn
Amps
@+SV @+15V
@-15V
12.0

0.18.

Bus Loads
Drawn

System Software
RSX-11 M, RSTS/E,
IAS, VAX/VMS

0.4

Power Drawn
Amps
@+SV @+15V @-15V
12.0

0.18

Bus Loads
Drawn

System Software
RSX-11 M, RSTS/E,
IAS

0.4

Dual-access 28 megabyte disk drive and two controllers. Expandable to a total of eight dual access
RK07 drives. One RK07-DC DECpack is Included. Average access time of 49 milliseconds, peak
transfer rate of 538K bytes per second.
Note: Each RK711 controller requires 2 SU's of mounting space in a BA 11-K and has 2 Hex slots
and 1 Quad slot of additional UNIBUS expansion space. Power.and Bus load figures are given per
controller.
Mounting
Code
2SUs
per
controller
FS drive

RK711-C

RT-11, RSX-11M,
RSTS/E, IAS

0.5

28.0 megabyte disk drive and controller. Expandable to a total of eight single access RK07 drives.
One disk cartridge included. 538K bytes per second peak transfer rate, 49.0 milliseconds average
access time. Mounted in one H9642 cabinet. NOTE: The RK711 controller requires 2 SUs of
mounting space and provides 2 hex slots and 1 quad slot of additional UNIBUS expansion space.
PREREQUISITE: PDP-11144.
Mounting
Code

RK711-FA
RK711-FD

0.5

System Software

28.0 megabyte disk drive and controller. Expandable to a total of eight single access RK07 drives.
One disk cartridge included. 538K bytes per second peak transfer rate, 49.0 milliseconds average
access time. NOTE: The RK711 controller requires 2 SUs of mounting space and provides 2 Hex
slots and 1 Quad slot of additional UNIBUS expansion space.
PREREQUISITE: VAX and PDP-11 systems except PDP-11 /03 and PDP-11 /23.
Mounting
Code

RK711-PA
RK711-PD

5.0

Bus Loads
Drawn

10.4 megabyte removable cartridge disk drive and controller. Expandable to a total of four singleaccess RL02 drives. NOTE: There is a maximum of two RL211 controllers per system.
PREREQUISITE: UNIBUS PDP-11.
Mounting
Code

RK711-EA
RK711-ED

Power Drawn
Amps
@+SV @+15V @-15V

Power Drawn
Amps
@+SV @+15V @-15V
12.0

0.18

Bus Loads
Drawn

System Software
RSX-11M, RSTS/E,
IAS

0.4

Dual-access kit containing drive logic and hardware, one controller and cables to convert an
RK711-E to an RK711-F.
PREREQUISITE: RK711-E
Mounting
Code
2 SUsfor
controller

Power Drawn
Amps
@-15V
@+SV @+15V
12.0

0.18

0.4

-55-

Bus Loads
Drawn

System Software

1for
controller

RSX-11 M, RSTS/E,
IAS

MASS STORAGE

ADD-ON CARTRIDGE DISK DRIVES
RL01-AK

5.0 megabyte removable cartridge disk drive. 512K bytes per second peak transfer rate, 67.5
milliseconds average access time. Includes disk cartridge.
PREREQUISITE: RL 11-AK, RLV11-AK, RL211-AK, RLV21-AK
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

N/A

PAN
RL02-AK

10.4 megabyte removable cartridge disk drive. 512K bytes per second peak transfer rate, 67.5
milliseconds average access time. Includes disk cartridge.
PREREQUISITE: RL211-AK, RLV21-AK, RL 11-AK, RLV11-AK.
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

N/A

PAN
RK07-EA
RK07-ED

RK07-PA
RK07-PD

RK07-FA
RK07-!=D

28.0 megabyte cartridge disk drive and disk cartridge. 538K bytes per second peak transfer rate,
49.0 milliseconds average access time.
PREREQUISITE: RK711-E subsystem.
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

FS Drive

N/A

28.0 megabyte cartridge disk drive and disk cartridge. 538K bytes per second transfer rate, 49.0
milliseconds average access time. Includes disk cartridge. Mounted in one H9642 cabinet.
PREREQUISITE: RK711-PA(PD).
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

FS Drive

N/A

Dual-access 28 megabyte disk drive. One RK07K-DC data cartridge is included. Average access
time of 49.0 millisecond, peak transfer rate of 538K bytes per second.
PREREQUISITE: RK711-F subsystem on VAX-11 /780 system
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

N/A

FS
RK07-C

Dual-access kit containing drive logic, hardware and cables to convert an RK07-E to an RK07-F.
PREREQUISITE: RK07-E

CARTRIDGE DISK ACCESSORIES
RL01K-DC

5.0 megabyte disk cartridge for the RL01.

RL02K-DC

10.4 megabyte disk cartridge for the RL02.

RK07K-AC

28.0 megabyte alignment disk cartridge for RK07.

RK07K-EF

Error free 28.0 megabyte disk cartridge for RK07.

RK07K-DC

28.0 megabyte disk cartridge for RK07.

-56-

UNIBUS DISK PACK DRIVE SUBSYSTEMS
RJM02-AA
RJM02-AD

67.0 megabyte disk pack drive and controller. Expandable to a total of eight single access RM02
disk drives. One disk pack included. 806K bytes per second peak transfer rate, 42.5 milliseconds
average access time.
PREREQUISITE: PDP-1134A or PDP-11/60.
Mounting
Code

2SUs
FS Drive

RJP06-AA
RJP06-AB

12.0

0.0

Bus Loads
Drawn

System Software

RSX-11M, RSTS/E,
IAS

0.4

176 megabyte disk drive and controller. Expandable to 8 RP drives (RP06). One RP06-P disk pack
included. 806K bytes per second peak transfer rate, 38.3 millisecond average access time.
PREREQUISITE: PDP-1134A or PDP-11 /60
Mounting
Code

2SUs
FS Drive

RJP06-BA
RJP06-BB

Power Drawn
Amps
@+SV @+15V
@-15V

12.0

0.0

Bus Loads
Drawn

System Software

RSX-11 M, RSTS/E,
IAS

0.4

Dual access 176 megabyte disk drive and two controllers. Expandable to 8 RP drives (RP06). One
RP06-P disk pack included. 806K bytes per second peak transfer rate, 38.3 millisecond average
access time.
PREREQUISITE: PDP-1134A or PDP-11 /60
Mounting
Code

Power Drawn
Amps@+SV

2SUs
FS Drive

12.0

Bus Loads
Drawn

System Software

RSX-11 M, RSTS/E,
IAS

PDP-11/70 DISK PACK DRIVE SUBSYSTEMS
RWM03-AA
RWM03-AD

Single access 67.0 megabyte disk pack drive and controller. Expandable to a total of 8 RM03
drives. One RM03-P disk pack is included. 1.2 megabytes per second peak transfer rate, 38.3
millisecond average access time.
Mounting
Code

MASSBUS PORT
and FS Drive

RWM03-BA
RWM03-BD

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

RSX-11M, RSTS/E,
IAS

Dedicated

Dual access 67.0 megabyte disk pack drive and two controllers. Expandable to a total of 8 RM03
drives. One RM03-P disk pack is included. 1.2 megabyte per second peak transfer rate, 38.3
millisecond average access time.
PREREQUISITE: PDP-11170 system
Mounting
Code

MASSBUS PORT
per11/70
and FS Drive

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

Dedicated

1 per
controller

RSX-11M, RSTS/E,
IAS

-57-

MASS STORAGE

RWM03-C

RM03 dual access kit containing drive logic, cables and second controller to convert RWM03-A to
RWM03-B.
PREREQUISITE: PDP-11/70 system with RWM03-A subsystem.
Power Drawn
Amps@+SV

Mounting
Code

MASSBUS PORT
RWP06-AA
RWP06-AB

MASSBUS PORT
and FS Drive

Bus Loads
Drawn

Power Drawn
Amps@+SV

System Software

RSX-11 M, RSTS/E,
IAS

Dedicated

Dual access 176 megabyte disk drive and 2 PDP-11/70 controllers. Expandable to 8 RP drives
(RP06). One RP06-P disk pack included. 806K bytes per second peak transfer rate, 38.3 millisecond average access time.
PREREQUISITE: Two PDP-11 /70 systems.
Mounting
Code

MASSBUS PORT
and FS Drive

RWP06-C

Dedicated

Single access 176.0 megabyte disk drive and controller. Expandable to 8 RP drives. (RP06). One
RP06-P disk pack included. 806K bytes per second peak transfer rate, 38.3 millisecond average
access time.
PREREQUISITE: PDP-11170
Mounting
Code

RWP06-BA
RWP06-BB

Bus Loads
Drawn

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

Dedicated

1 per
controller

RSX-11 M, RSTS/E,
IAS

Dual access kit containing drive logic, cables and second controller to convert RWP06-A to
RWP06-B.
PREREQUISITE: Two PDP-11 /70 systems with RWP06-A subsystem.
Mounting
Code

Power Drawn
Amps@+SV

MASSBUS PORT

Bus Loads
Drawn

Dedicated

VAX-11/780 DISK PACK DRIVE SUBSYSTEMS
REM03-AA
REM03-AD

Single-access 67-megabyte removable disk pack drive and VAX-11/780 MASSBUS adapter. Expandable to a total of 8 single-access RM03 drives. One RM03-P disk pack is included. 1.2 megabytes/second peak transfer rate, 38.3 msec average access time. (Note: Requires 2 Massbuss
Ports in CPU cab or H9602-HA(HB).)
PREREQUISITE: VAX-11 /780 system.

REM03-BA
REM03-BD

Dual-access 67-megabyte removable disk pack drive and two VAX-11/780 MASSBUS adapters.
Expandable to a total of 8 dual-access RM03 drives. One RM03-P disk pack is included. 1.2
megabytes/second peak transfer rate, 38.3 msec average access time. (Note: Requires 2 Massbuss Ports in CPU cab or H9602-HA(HB).)
PREREQUISITE: VAX-111780 system.

REM03-DA
REM03-DB

RM03 dual access conversion kit. Contains RM03-C, VAX-111780 MASSBUS adapter and power
supply to convert REM03-A to REM03-B.
PREREQUISITE: REM03-A.

REP06-AA
REP06-AB

Single-access 176-megabyte removable disk pack drive and VAX-11/780 MASSBUS adapter.
Expandable to a total of 8 single-access RP drives (RP06). One RP06-P disk pack is included. 806K
bytes/second peak transfer rate, 38.3 msec average access time. (Note: Requires 2 Massbuss
Ports in CPU cab or H9602-HA(HB).)

-58-

REP06-BA
REP06-BB

Dual-access 176-megabyte removable disk pack drive and two VAX-11 /780 MASSBUS adapters.
Expandable to a total of 8 dual-access RP drives (RP06). One RP06-P disk pack is included. 806K
bytes/second peak transfer rate, 38.3 msec average access time. (Note: Requires 2 Massbuss
Ports in CPU cab or H9602-HA(HB).)

REP06-DA
REP06-DB

RP06 dual-access conversion kit. Contains RP06-C, VAX-11/780 MASSBUS adapter and power
supply to convert REP06-A to REP06-B.
PREREQUISITE: REP06-A

ADD-ON DISK PACK DRIVES
RM02-AA
RM02-AD

Single-access 67.0 megabyte top loading free standing disk pack drive. 806K bytes per second
peak transfer rate, 42.5 milliseconds average access time.
PREREQUISITE: RJM02-A disk subsystem.

RM03-AA
RM03-AD

Single-access 67.0 megabyte top loading free standing disk pack drive. 1.2 megabytes per second
peak transfer rate, 38.3 millisecond average access time.
PREREQUISITE: RWM03-A disk subsystem.

RM03-BA
RM03-BD

Dual-access 67.0 megabyte top loading free standing disk pack drive. 1.2 megabytes per second
peak transfer rate, 38.3 millisecond average access time.
PREREQUISITE: RWM03-B disk subsystem.

RP06-AA
RP06-AB

Single-access 176 megabyte free standing disk pack drive. 806K bytes per second peak transfer
rate, 38.3 millisecond average access time.
PREREQUISITE: RJP06-A or RWP06-A disk subsystem.

RP06-BA
RP06-BB

Dual-access 176 megabyte free standing disk pack drive. 806K bytes/second peak transfer rate,
38.3 millisecond average access time.
PREREQUISITE: RJP06-B or RWP06-B disk subsystem.

DISK DRIVE ACCESSORIES
RP06-C

RP06 dual access kitcontaining drive logic, hardware and cables to convert RP06-A to RP06-B.

RP06-P

176 megabyte disk pack for RP06.

RM03-C

RM03 dual access kit containing drive logic and cables to convert RM03-A to RM03-B.

RM03-P

67.0 megabyte disk pack for RM02 or RM03.

-59-

MAGNETIC TAPE

MAGNETIC TAPE SUBSYSTEMS MOUNTED IN H9602 CABINETS
TS11-BA
TS11-BB

9-track, 45 inches per second, 1600 bits per inch, industry compatible magnetic tape transport and
controller. Expandable to a total of 4 TS11 subsystems per CPU. Microprocessor controlled drive
and formatter. Includes H9602, a single width high-boy cabinet.
Mounting
Code

Power Drawn

1 Hex slot
Dedicated CAB

TJE16-AA
TJE16-AD

1.5

2 SUs for controller
Dedicated CAB

MASSBUS PORT
Dedicated CAB

Power Drawn

@+SV

@-15V

12.0

0.0

0.4

System Software

RSX-11M, RSX-11M-PLUS,
RSTS/E, IAS

Power Drawn

Bus Loads
Drawn

Amps@+5V
Dedicated

System Software

RSX-11M, RSX-11M-PLUS,
RSTS/E, IAS

9-track, 125 inches per second, 800 or 1600 bits per inch, TU77 magnetic tape transport and
controller. Expandable to a total of 4 TU77 transports. Includes H9602, a single width high-boy
cabinet.

2SUs
Dedicated CAB

Power Drawn

Bus Loads
Drawn

@+SV

Amps
@+15V

@-15V

12.0

0.0

0.4

System Software

RSX-11M, RSX-11M-PLUS,
RSTS/E, IAS

9-track, 125 inches per second, 800 or 1600 bits per inch, TU77 magnetic tape transport and
controller unit. Expandable to a total of 4 TU77 transports. Includes H9602, a single width high-boy
cabinet.
PREREQUISITE: PDP-11170 system.
Mounting
Code

MASSBUS PORT
Dedicated CAB

TME11-AA
TME11-AD

Bus Loads
Drawn

Amps
@+15V

Mounting
Code

TWU77-AB
TWU77-AD

RSX-11M, RSX-11M-PLUS
RSTS/E

9-track, 45 inches per second, 800 or 1600 bits per inch, TE16 magnetic tape transport and
controller. Expandable to a total of 8 TE16 transports. Includes H9602, a single width high-boy
cabinet.
PREREQUISITE: PDP-11170 system.
Mounting
Code

TJU77-AB
TJU77-AD

System Software

9-track, 45 inches per second, 800 or 1600 bits per Inch, TE16 magnetic tape transport and
controller. Expandable to a total of 8 TE16 transport~. Includes H9602, a single width high-boy
cabinet.
Mounting
Code

TWE16-AA
TWE16-AB

Bus Loads
Drawn

Amps@+SV

Power Drawn

Bus Loads
Drawn

Amps@+ SY
Dedicated

System Software

RSX-11 M, RSX-11 M-PLUS

Free-standing, nine-track magnetic tape transport with control unit, capable of handling up to eight
TE10W tape transports. 17M character/reel, 45 inches per seconds R/W speed. 800 bits per inches
tape density. Includes H9602, a single width high-boy cabinet.
Mounting
Code

1 SU
Dedicated CAB

Power Drawn

Bus Loads
Drawn

Amps@+ SY
5.0

System Software

RSX-11M, RSTS/E,
IAS
-60-

MAGNETIC TAPE SUBSYSTEMS MOUNTED IN H960 CABINETS
TME11-EA
TME11-ED

9-track, 45 inches per second, 800 bits per Inch, TE10W magnetic tape transport and controller.
Expandable to a total of 8 TE1 OW transports. Includes H960 cabinet.
Mounting
Code

Power Drawn
Amps@+5V

1 SU
Dedicated CAB

TS11-DA
TS11-DB

5.0

RSX-11M,
RSTS/E, IAS

Power Drawn
Amps@+5V

1 Hex slot
Dedicated CAB

Bus Loads
Drawn

1.5

System Software

RSX-11M, RSX-11M-PLUS,
RSTS/E

9-track, 45 Inches per second, 800 or 1600 bits per inch, TE16 program selectable magnetic tape
transport and controller. Expandable to a total of 8 TE16 transports. Includes H960 cabinet.
Mounting
Code

2SUs
Dedicated CAB

TWE16-EA
TWE16-ED

System Software

9-track, 45 Inches per second, 1600 bits per inch, industry compatible magnetic tape transport and
controller. Expandable to a total of 4 TS11 subsystems per CPU. Microprocessor controlled drive
and formatter. Includes H960 cabinet.
Mounting
Code

TJE16-EA
TJE16-ED

Bus Loads
Drawn

Power Drawn
Amps
@+5V @+15V
@-15V

12.0

0.0

Bus Loads
Drawn

0.4

System Software

RSX-11M, RSX-11M-PLUS,
RSTS/E, IAS

MASSBUS PORT
Dedicated CAB

Power Drawn
Amps@+5V

Bus Loads
Drawn

Dedicated

System Software

RSX-11M, RSX-11M-PLUS,
RSTS/E, IAS

MAGNETIC TAPE SUBSYSTEM MOUNTED IN H9646 CABINET
TS11-CA
TS11-CB

9-track, 45 Inches per second, 1600 bits per inch, industry compatible magnetic tape transport and
controller. Expandable to a total of 4 TS11 subsystems per CPU. Microprocessor- controlled drive
and formatter. Includes H9646 cabinet.
Mounting
Code

Power Drawn
Amps@+5V

1 Hexslot
Dedicated CAB

Bus Loads
Drawn

1.5

System Software

RSX-11M, RSX-11M-PLUS,
RSTS/E

MOUNTED IN VAX-11/780 CABINETS
TEE16-AE
TEE16-AJ

9-track, 45 inches per second, 800 or 1600 bits per inch, TE16 magnetic tape transport and VAX111780 MASSBUS adapter. Industry compatible. Expandable to total of eight TE16 transports.
(Note: requires Massbus port in CPU or H9602-HA(HB).)

-61-

MAGNETIC TAPE

TEU45-KA
TEU45-KB

9-track, 75 Inches per second, 800 or 1600 bits per Inch, TU45 magnetic tape transport and VAX111780 MASSBUS adapter. Industry compatible. Expandable to total of eight TU45 transports.
(Note: requires Massbus port in CPU or H9602-HA(HB).)

TEU77-AB
TEU77-AD

9-track, 125 inches per second, 800 or 1600 bits per inch, TU77 magnetic tape transport and VAX11/780 MASSBUS adapter. Expandable to a total of 4 TU77 transports. (Note: requires Massbus
port in CPU or H9602-HA(HB).)

ADD-ON MAGNETIC TAPE TRANSPORTS MOUNTED IN H9602 CABINETS
TE16-AE
TE16-AJ

9-track, 45 inches per second, 800 or 1600 bits per inch, industry compatible half-inch magtape
transport. Includes H9602, a single width high-boy cabinet.
PREREQUISITE: TJE16-A, TWE16-A or TEE16 subsystem.

TU77-AF
TU77-AJ

9-track, 125 inches per second, 800 or 1600 bits per inch, industry compatible half-inch magtape
transport. 200,000 bytes per second peak transfer rate. Includes H9602, a single width high-boy
cabinet.
PREREQUISITE: TJU77-A, TWU77-A or TEU77 subsystem.

TE10W-AE
TE10W-AJ

Free-standing, nine-track magnetic tape transport. 17M character/reel, 45 inches per seconds
R/W speed. 800 bits per inches tape density. Includes H9602, a single width high-boy cabinet.
PREREQUISITE: TME11-A subsystem.

ADD-ON MAGNETIC TAPE TRANSPORTS MOUNTED IN H960 CABINETS
TE16-EE
TE16-EJ

9-track, 45 inches per second, 800 or 1600 bits per inch, industry compatible half-inch magtape
transport. Includes H960 cabinet.
PREREQUISITE: TJE16-E or TWE16-E subsystem, (except PDP-11 /60).

TE10W-EE
TE10W-EJ

9-track, 45 inches per second, 800 bits per inch, industry compatible half-inch magtape transport.
Includes H960 cabinet.
PREREQUISITE: TME11-E subsystem.

VAX-11/780 ADD-ON MAGNETIC TAPE TRANSPORTS
TU45-KE
TU45-KF

Program-selectable 800 or 1600 bits per inch, 9-track, 75 inches per second magnetic tape transport unit. Industry compatible.
PREREQUISITE: TEU45 magnetic tape subsystem.

-62-

INPUT/OUTPUT

HARDCOPY TERMINALS
LA36-HE
LA36-HF

EIA/CCITT version Free-standing DECwriter II hardcopy terminal with numeric keypad. 30 characters per second, 96 characters.
PREREQUISITE: DL 11-WB or equivalent.

LA36-CE
LA36-CJ

20mA version Free-standing DECwriter II hardcopy terminal. 30 characters per second, 96 characters.
PREREQUISITE: DL 11-WA or equivalent.

LA35-CE
LA35-CJ

20mA version of the LA36 Free-standing DECwriter printer with no keyboard. (Receive only)
PREREQUISITE: DL 11-WA or equivalent.

LA37-PE
LA37-PJ

EIA version Free-standing DECwriter II hardcopy terminal, plus special character set for APL-11
software.
PREREQUISITE: DL 11-WB or equivalent.

LA37-CE
LA37-CJ

20mA version Free-standing DECwriter II hardcopy terminal, plus special character set for APL-11
software.
PREREQUISITE: DL 11-WA or equivalent.

LA38-GA

LA38-HA

Free-standing DECwriter IV printing terminal. Includes stand, universal power supply, standard EIA
interface and EIA null modem cable. Variable horizontal tabs and margins, four character sizes, six
line spacings and printhead adjustment. 18-button numeric keypad, 30-character per second print
speed and baud rates up to 300 bits per second.
PREREQUISITE: DL 11-WB or equivalent.

LA120-DA

EIA version high speed interactive hardcopy free-standing terminal. Includes universal power
supply. 180 characters per second. Up to 9600 baud. 7x7 dot matrix. Contoured typewriter-styled
keyboard with N-key rollover.

NOTE: Communication cables are not provided with the LA120 terminal and must be ordered
separately. The recommended cables are: 1) BC03M for local connection of the LA 120 to a line
unit, and 2) BC05D for connection of the LA 120 to a modem.

LA12X-AL

20mA conversion kit for LA 120.

LAXX-KG

EIA/CCITT adapter, allows an LA36 to connect to an EIA/CCITT interface.

-63-

INPUT/OUTPUT DEVICES

LSl-11 LINE PRINTERS
LPV11-PA
LPV11-PD

Free-standing, 180 cps printer with serial line interface. 3 inch to 132 column width. 96 character
ASCII set.
Mounting
Code

Power Drawn
Amps@+SV

LSl-11 Double slot
FS
LPV11-VA
LPV11-VD

1.0

Free-standing 300 LPM, 64 character line printer.
Mounting
Code

Power Drawn
Amps@+SV

LSl-11 Double slot
FS
LPV11-WA
LPV11-WD

Bus Loads
Drawn

1.0

Free-standing 240 LPM, 64 character line printer.
Mounting
Code

Power Drawn
Amps@+SV

LS 1-11 Double slot
FS

Bus Loads
Drawn

1.0

UNIBUS LINE PRINTERS
LP11-CA
LP11-CD

LP11-DA
LP11-DD

LP11-YA
LP11-YD

LP11-ZA
LP11-ZD

900 lines per minute. 132 column, 64 character high speed line printer and control unit.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot
FS

1.5

Bus Loads
Drawn

660 lines per minute. 132 column, 96 character high speed line printer and controJ unit.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot
FS

1.5

Bus Loads
Drawn

600 lines per minute. 132 column, 64 character line printer and control unit.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot
FS

1.5

Bus Loads
Drawn

600 lines per minute when using 64 ASCII character set and 436 lines per minute when using 96
ASCII character set. 132 column, 96 character line printer and control unit.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot
FS

1.5

-64-

Bus Loads
Drawn

LP11-VA
LP11-VD

300 lines per minute. 132 column, 64 character line printer and control unit.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot

1.5

Bus Loads
Drawn

FS
LP11-AA

285 lines per minute, 64 ASCII character set, 132 column band line printer and control unit with
cable.
Mounting
Code

Power Drawn
Amps@+SV

1 Quad slot

1.5

Bus Loads
Drawn

FS
LP11-BA

285 lines per minute when using 64 ASCII character set and 204 lines per minute using 96 ASCII
character set. 132 column band line printer and control unit with cable.
Mounting
Code

Power Drawn
Amps@+SV

1 Quad slot

1.5

Bus Loads
Drawn

FS
LP11-WA
LP11-WD

240 lines per minute. 132 column, 96 character line printer and control unit.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot

1.5

Bus Loads
Drawn

FS
LA11-PA
LA11-PD

180 characters per second. 132 column, 96 character line printer (LA 180 Line Printer) and control
unit.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot

1.5

Bus Loads
Drawn

FS
LP05K-LL

Long line interface for the LP11-V/W or the LP11-Y /Z printer systems. Allows for up to 2,000 feet
(608m) between computer and printer.
PREREQUISITE: LP11-V/Wor LP11-Y/Z.

-65-

INPUT/OUTPUT DEVICES

VIDEO TERMINALS
VT100-AA
VT100-AB

High performance video display terminal. (Table-top) Features include double-width/double-size
characters, SO columns x 24 lines or 132 columns x 14 lines, detached keyboard, line-drawing
graphic characters, smooth scrolling, split screen, reverse video or underline character attribute
and composite video input/output. The VT100 operates on full-duplex asynchronous communication lines, and is supplied with a standard EIA interface.
PREREQUISITE: DZ11-A, DL 11-WB, DZ11-E, DLV11 or equivalent.)
NOTE: Communication cables are not provided with the VT100 terminal and must be ordered
separately. The recommended cables are: 1) BC03M for local connection of the VT100 to a line
unit, and 2) BC05D for connection of the VT100 to a modem.

VT1XX-AB

VT1XX-AA

20mA current loop adapter for VT100. Allows a VT100 terminal to connect to a 20mA current loop
interface. Includes BCOSF-15 cable.

VT61-AA
VT61-AB

Table-top intelligent text processing video display terminal. LSl-11, 20mA current loop.
PREREQUISITE: DL 11-WA, DLV11

VT61-AE
VT61-AF

Table-top intelligent text processing video display terminal. LSl-11, 20mA current loop, limited
modem control. PREREQUISITE: DL 11-WA, DLV11

VT62-AA
VT62-AB

Table-top alphanumeric video display terminal for transaction processing applications. Form fill for
user entry, function keys, reverse video, automatic cursor positioning, local error detection capability, left and right justification. 24 X SO-character upper/lower case display.
PREREQUISITE: PDP-1134A, PDP-11/60 or PDP-11/70 with DZ11-C, DZ11-F, or equivalent.)
NOTE: Communication cables are not provided with the VT62 terminal and must be ordered
separately. The recommended cables are: 1) BC03Z for local connection of the VT62 to a line unit,
and 2) BC05D for connection of the VT62 to a modem.

VT62-AC
VT62-AD

NOTES:
1.
Local terminals are designed for direct connection to the computer and may have either an
EIA or 20mA interface. The computer must have the same type of interface. Local connection of EIA terminals require a BC03M null modem cable or an H312-A null modem.

Remote terminals connect to computers via telephone lines to EIA/CCITT standard
interfaces.

Remote terminal and data set characteristics (baud rate, etc.) must be matched by the data
set and interface at the computer site.

-66-

UNIBUS COMMUNICATIONS OPTIONS
AUXILIARY PROCESSOR OPTIONS
KMC11-A

High speed general purpose MSI microprocessor that interfaces to PDP-11 UNIBUS. It uses a 72bit microcode and operates on 8-bit data paths. Storage: 1024 16-bit word writable control memory, and 1024 16-bit data memory. NPR UNIBUS interface provides 8- or 16-bit direct memory
access to data buffers or control blocks located in PDP-11 memory under microprogram control.
External connector furnished to allow direct connection to high-speed peripheral such as DMC11
synchronous line unit.
Mounting
Code

Power Drawn
Amps@+SV

Hex slot

5.0

Bus loads
Drawn

System Software
RSX-11M, IAS

SINGLE LINE ASYNCHRONOUS INTERFACES
DL11-WB

EIA/CCITT serial line interface and line frequency real-time clock. Switch selectable character size,
parity, stop bits and speed of operation. The line frequency clock is used when this option is the
console interface on an PDP-11 /04 or PDP-1134A. The DL 11-WB requires a null modem with local
devices; in private communication modems are also required. Includes 25 ft. (7.6m) cable for
connection to modem.
Mounting
Code
Quad slot

Power Drawn
Amps
@+SV @+15V @-15V
2.0

DL11-WA

System Software
RT-11, RSX-11M, RSTS/E
RSX-11 M-PLUS, IAS

0.15

20mA serial line interface and line frequency real-time clock. Switch selectable character size,
parity, stop bit, and speed of operation. Switch selectable active or passive transmitter and receiver. The line frequency clock is used when this option is the console interface on an PDP-11 /04 or
PDP-1134A. Includes cable.
Mounting
Code
Quad slot

Power Drawn
Amps
@+SV @+15V @-15V
2.0

DL11-E

0.05

Bus loads
Drawn

0.05

Bus loads
Drawn

System Software
RT-11, RSX-11M, RSTS/E
RSX-11M-PLUS, IAS

0.15

Modem controlling EIA/CCITT serial line interface with a feature which allows a customer to specify
speed, character size, parity, and stop bit size. Includes 25 ft. (7.6 m) of cable for connection to
modem.
Mounting
Code
Quad slot

Power Drawn
Amps
@+SV @+15V @-15V
1.8

0.05

0.15

-67-

Bus loads
Drawn

System Software
RT-11, RSX-11M, RSTS/E,
RSX-11M-PLUS, IAS

COMMUNICATIONS OPTIONS

ASYNCHRONOUS MULTIPLEXERS (PROGRAMMED 1/0)
DZ11-A

Asynchronous 8-line multiplexer for EIA/CCITT terminals or lines. Features programmable speeds
(up to 9600 bits per second) and formats on a per-line basis. Can expand to 16 lines with an
addition of a DZ11-B. Includes data set control for use with Bell 103 or 113 modems or equivalent.
For modems, BC05D cables are needed. For local connect of EIA/CCITT terminals, use BC03M-XX
series of cables.
Power Drawn
Amps

Mounting
Code

Hex slot and
DISTRIBUTION PAN

DZ11-B

Bus Loads
Drawn

@+SV

@+15V

@-15V

2.2

0.1

0.13

System Software

RT-11, RSX-11M,
RSX-11M-PLUS,RSTS/E
IAS, VAX/VMS

Eight-line EIA/CCITT expansion multiplexer for the DZ11-A.
PREREQUISITE: DZ11-A.
Power Drawn
Amps

Mounting
Code

Hex slot

DZ11-C

@+SV

@+15V

@-15V

2.2

0.1

0.13

System Software

RT-11, RSX-11M,
RSX-11M-PLUS,RSTS/E
IAS, VAX/VMS

Asynchronous 8-line multiplexer for 20mA current loop t.erminals. Features programmable speeds
(up to 9600 bits per second) and formats on a per-line basis. Use BC04R-12 cable for DIGITAL
20mA terminals. Includes distribution panel with (16) 4-screw terminal strips. Can expand to 16
lines.
Mounting
Code

Hex slot and
DISTRIBUTION PAN

DZ11-D

Bus Loads
Drawn

Power Drawn
Amps

@+SV

@+15V

@-15V

2.1

0.12

0.4

System Software

RT-11, RSX-11M
RSX-11M-PLUS,RSTS/E
IAS, VAX/VMS

Eight-line 20mA current loop expansion multiplexer for the DZ11-C.
PREREQUISITE: DZ11-C.

Hex slot

DZ11-E

Bus Loads
Drawn

Power Drawn
Amps

Mounting
Code

@+SV

@+15V

@-15V

2.1

0.12

0.4

System Software

RT-11 , RSX-11 M
RSX-11M-PLUS,RSTS/E
IAS, VAX/VMS

Asynchronous 16-line multiplexer for EIA/CCITT terminals or lines. Features programmable
speeds (up to 9600 bits per second) and formats on a per-line basis. Includes data set control for
use with Bell 103 and 113 modems or equivalent. For modems, BC05D cables are needed. For local
connect of EIA/CCITT terminals, use BC03M-xx series of cables.
Power Drawn
Amps

Mounting
Code

2 Hex slots and
DISTRIBUTION PAN

@+SV

@+15V

@-15V

4.4

0.2

0.26

-68-

Bus Loads
Drawn

System Software

RT-11, RSX-11M,
RSX-11M-PLUS,RSTS/E
IAS, VAX/VMS

DZ11-F

Asynchronous 16 line multiplexer for 20mA current loop terminals. Features programmable
speeds (up to 9600 bits per second) and formats on a per-line basis. Use BC04R-12 cables for
DIGITAL 20mA terminals.

Mounting
Code
2 Hex slots and
DISTRIBUTION PAN

Power Drawn
Amps
@+5V @+15V
@-15V
4.2

0.24

Bus Loads
Drawn

System Software

RT-11, RSX-11M
RSX-11M-PLUS,RSTS/E
IAS, VAX/VMS

0.8

ASYNCHRONOUS MULTIPLEXERS (NPR OUTPUT)
DH11-AA
DH11-AC

Programmable asynchronous 16-line multiplexer and mounting panel. Includes space for up to 4
DM11 line adapters. Character length, parity, stop bits and baud rates (up to 9600) are programmable on an individual line basis. EIA/CCITT and 20mA lines may be mixed (in 4-line groups). Output
transfers are NPR, input transfers silo buffered programmed 1/0.

Mounting
Code
2 SUS and
SM PAN

DH11-AD

2 SUsand
DISTRIBUTION PAN

0.0

System Software

RSX-11 M, RSTS/E,
RSX-11 M-PLUS, IAS

0.24

Power Drawn
Amps
@+5V @+15V
@-15V
10.8

0.4

Bus Loads
Drawn

System Software

RSX-11 M, RSTS/E,
RSX-11 M-PLUS, IAS

0.65

Complete programmable asynchronous 16-line multiplexer. EIA/CCITT. Does not include modem
control. Does not include cables. For local connect of EIA/CCITT terminals use BC03M-XX series
cables.

Mounting
Code
2 SUS and
DISTRIBUTION PAN

DM11-BB

8.4

Bus Loads
Drawn

Complete programmable asynchronous 16-line multiplexer. EIA/CCITT only. Includes modem
control. Does not include cables. For modems BC05D-25 cables are needed. For local connect of
EIA/CCITT terminals, use BC03M-XX series cables.

Mounting
Code

DH11-AE

Power Drawn
Amps
@+5V @+15V
@-15V

Power Drawn
Amps
@+5V @+15V
@-15V
8.6

0.1

Bus Loads
Drawn

System Software

RSX-11 M, RSTS/E,
RSX-11M-PLUS, IAS

0.34

16-line modem control multiplexer for program operation of control leads for 103, 202, or equivalent data sets.

Mounting
Code

Power Drawn
Amps@+SV

DH11-AA

2.4

-69-

Bus Loads
Drawn

COMMUNICATIONS OPTIONS

LINE ADAPTERS
DM11-DA

Line adapter for four 20mA terminals.
PREREQUISITE:DH11-AA

DM11-DB

Line adapter for four EIA (data only). Includes four 25 foot (7.6m) modem cables.
PREREQUISITE:DH11-AA

DM11-DC

Line adapter for four EIA/CCITT compatible lines which, when used with a DM11-BB, provides
modem control. Includes four 25 foot (7 .6m) modem cables.
PREREQUISITE:DH11-AA and DM11-BB

SINGLE LINE SYNCHRONOUS INTERFACES
DUP11-DA

Full/half-duplex synchronous interface. Can be programmed to handle 8 bit character-oriented
protocols such as DDCMP and BISYNC and bit-oriented protocols such as SDLC and HDLC.
Hardware calculates CRC-16 when using DDCMP protocol (not BISYNC) and CRC/CCITT when
using bit-oriented protocols. Interfaces to Bell 200 series modems or equivalent at speeds up to
9600 bits per second. Includes 25 ft. (7.6m) modem cable and data set control.
Mounting
Code

Hex slot

Power Drawn
Amps
@+SV @+15V
@-15V

DU11-DA

KG11-A

0.08

3.6

System Software

Bus Loads
Drawn

DECnet-RT, RSX-11M,
RSX-11 M-PLUS, DECnet-11 M,
DECnet-IAS

Full/half-duplex synchronous interface. Programmable sync character, character size, and format
(5 to 8 data bits, plus odd, even, or no parity). Transmission speeds up to 9600 bps. Interfaces to
Bell 200 Series modems or equivalent. 25 foot (7.6m) modem cable provided. Data set control
included. Cannot be used with bit-oriented protocols such as SDLC and HDLC.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot

2.0

Bus Loads
Drawn

System Software

DECnet-RT, RSX-11 M,
DECnet-11 M,
DECnet-IAS

Communications arithmetic option. Computes cyclic redundancy check (CRC), longitudinal redundancy check (LRC), and block check characters (BCC).
PREREQUISITE: DUP11, or DQ11.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot

1.5

Bus Loads
Drawn

LOCAL NETWORK LINK MODULES
DMC11-AL

Network link DDCMP microprocessor module (local). DDCMP protocol is implemented in hardware for high speed NPR input and output transfers. One DMC11-AL operates at 1,000,000 bits per
second in full-duplex mode. Two DMC11-ALs operate 1,000,000 bits per second in half-duplex
mode. (Requires DMC11-MA or DMC11-MD line units.)
Mounting
Code

Power Drawn
Amps@+SV

Hex slot

5.0

Bus Loads
Drawn

System Software

DECnet-RT, RSX-11 M,
RSX-11 M-PLUS, DECnet-11 M
DECnet/E, DECnet-IAS
VAX/VMS

-70-

DMC11-MA

Network Link line unit module (local), with data transmissions of 1,000,000 bits per second.
Provides high speed connection to another local DMC11 using coaxial cable up to 6000 ft. (1829m)
long. (Includes built-in modem). Operates full-duplex with two cables and half-duplex with a single
cable. Cables not included. BC03N is recommended.
PREREQUISITE: DMC11-AL.
Mounting
Code

Hex slot
(next to DMC11-AL)

DMC11-MD

Power Drawn
Amps

@+5V

@+15V

@-15V

3.0

0.18

0.46

Bus Loads
Drawn

System Software

NIA

DECnet-RT, RSX-11M,
RSX-11 M-PLUS, DECnet-11M,
DECnetlE, DECnet-IAS,
VAX/VMS

Network Link line unit module (local), with data transmissions of 56,000 bits per second. Provides
high speed connection to another local DMC11 using coaxial cable up to 18,000 ft. (5,487m) long.
(Includes built-in modem). Operates full-duplex with two cables and half-duplex with a single cable.
Cables not included. BC03N is recommended.
PREREQUISITE: DMC11-AL.
Mounting
Code

Hex slot
(next to DMC11-AL)

Power Drawn
Amps

@+5V

@+15V

@-15V

3.0

0.18

0.46

-71-

Bus Loads
Drawn

System Software

NIA

DECnet-RT, RSX-11M,
RSX-11 M-PLUS, DECnet-11M,
DECnet/E, DECnet-IAS,
VAX/VMS

COMMUNICATIONS OPTIONS

REMOTE NETWORK LINK MODULES
DMC11-AR

DMC11-DA

Network link DDCMP microprocessor module (remote). DDCMP protocol implemented in hardware for remote operation. Operates full or half-duplex. NPR input and output transfers. Includes
firmware for unattended operation (remote load detect). Requires DMC11-DA or DMC11-FA line
unit.
Mounting
Code

Power Drawn
Amps@+SV

Hex slot

5.0

Hex slot
(next to DMC11-AR)

0.03

3.0

Bus Loads
Drawn

System Software

N/A

DECnet-RT, RSX-11 M,
RSX-11 M-PLUS, DECnet-11 M,
DECnet/E, DECnet-IAS,
VAX/VMS

0.31

Power Drawn
Amps
@+SV @+15V
@-15V

3.0

0.03

Bus Loads
Drawn

System Software

N/A

DECnet-RT, DECnet/E,
RSX-11M, DECnet-11M,
RSX-11 M-PLUS, IAS,
DECnet-IAS, VAX/VMS

0.31

Full/half-duplex NPR synchronous interface for speeds up to 10,000 bits per second. EIA/CCITT
termination suitable for use with Bell Series 201, 208, or 209 equivalent modems. Data set control
included.
Mounting
Code

D011-EA

Power Drawn
Amps
@+5V @+15V
@-15V

Network link line unit module (remote). Interfaces to CCITT V.35/DDS synchronous modems (Bell
500A L 1/5 or equivalent) at speeds up to 250,000 bits per second. Includes data set control for full
or half-duplex, private wire operation. Can be used to communicate over common carrier facilities
to another DMC11 or to a synchronous interface with software implementation of DDCMP version
3.2. Includes 25 ft. (7.6m) modem cable.
PREREQUISITE: DMC11-AR.
Mounting
Code

D011-DA

DECnet-RT, RSX-11 M,
RSX-11 M-PLUS, DECnet-11 M,
DECnet/E, DECnet-IAS,
VAX/VMS

Network link line unit module (remote). Interfaces to EIA/CCITT synchronous modems (Bell series
200 compatible) at speeds up to 19,200 bits per second. Operates full or half-duplex. Includes data
set control for switched network operations. Can be used to communicate over common carrier
facilities to another DMC11 or to a synchronous interface with software implementation of DDCMP
version 3.2. Includes 25 ft. (7.6m) modem cable.
PREREQUISITE: DMC11-AR.
Mounting
Code

DMC11-FA

System Software

Bus Loads
Drawn

Power Drawn
Amps@+5V

System Software

RSX-11 M, DECnet/IAS,
VAX/VMS

5.7

Full/half-duplex synchronous NPR interface to Bell system 303 or equivalent modems. Transmission speeds up to 1,000,000 bits per second. Data set control included.
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

RSX-11 M, DECnet/IAS,
VAX/VMS

5.7

-72-

MULTIPLE LINE SYNCHRONOUS/ASYNCHRONOUS INTERFACES
DV11-AA

Synchronous/asynchronous communications preprocessor for up to 16 EIA/CCITT lines. NPR
input and output transfers, table driven character processing, CRC calculation. Up to 9600 bits per
second full-duplex transmission for each line. Requires one or two DV11-BA, DV11-BB, or DV11BC line groups. Includes modem control. Power figures are given for a 16 asynchronous line
configuration.
Mounting
Code

2SUs

Power Drawn
Amps
@+SV @+15V
@·15V

20.5

DV11-BA

0.6

DECnet-IAS

1.0

Power Drawn
Amps@+SV

Bus Loads
Drawn

2.6

N/A

DV11-AA and
DISTRIBUTION PAN

8-line asynchronous group for use with DV11-AA. Features programmable speeds and formats on
a per line basis. Does not include cables.
PREREQUISITE: DV11-AA.
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

4.0

N/A

DV11-AA and
DISTRIBUTION PAN
DV11-BC

System Software

8-line synchronous group for use with DV11-AA. Can handle character-oriented protocols with
switch-selectable character size and format (5 to 8 data bits plus odd, even, or no parity). Program
selectable per line choice of two switch-selectable sync characters. Includes internal clock for local
connection using H312-A null modem with switch-selectable speeds. Switch-selectable parameters are on a four-line basis. Does not include cables.
PREREQUISITE: DV11-AA.
Mounting
Code

DV11-BB

Bus Loads
Drawn

8-line synchronous/asynchronous group for use with DV11-AA. Four lines are synchronous (equivalent to DV11-BA lines). Four lines are asynchronous (equivalent to DV11-BB lines). Does not
include cables.
PREREQUISITE: DV11-AA.
Mounting
Code

Power Drawn
Amps@+SV

Bus Loads
Drawn

3.3

N/A

DV11-AA and
DISTRIBUTION PAN

AUTO DIAL INTERFACES
DN11-AA

System unit mounting and control requires up to 4 DN11-DA module sets.
Mounting
Code

1 SU
DN11-DA

Power Drawn
Amps@+SV

Bus Loads
Drawn

N/A

Module set interface to Bell 801 ACU. Includes 25 ft. (7.6m) cable.
PREREQUISITE: DN11-AA.
Mounting
Code

Power Drawn
Amps@+SV

DN11-AA

1.0

-73-

Bus Loads
Drawn

COMMUNICATIONS OPTIONS

COMMUNICATIONS ACCESSORIES
BC03M-XX

Null modem cable allows local connection of asynchronous interfaces or terminals having EIA
interfaces. The following lengths are available: 25 ft. (7.6m), 100 ft. (30.5m), 250 ft. (76.2m), 500 ft.
(152.4m), 1000 ft. (304.8m) cable (3 shielded twisted pair) with two DB25S sockets.

BC04R-12

Four spade lugs to male AMP Mate-N-Lok connector.

BC03N-AO

100 ft. (30.5m) coaxial cable for use with local DMC11 line units. When interconnecting a pair of line
units one cable is required for half-duplex operation and two cables are required for full duplex
operation. DMC11-MA or DMC11-MD. Use Belden cable type 8232 or equivalent for lengths greater than 100 ft.

BC05D-XX

EIA extension cable for use with cinch 08258 socket and DB25P plug. The following lengths are
available: 10 ft. (3.0m) and 25 ft. (7.6m)

BC11S-25

Cable, H856 to H856, 18 twisted pair. For use with LA 180.

H312-A

Null modem allows direct connection of EIA interfaces. When interconnecting two synchronous
devices, an external clock has to be provided. When connecting two interfaces which do not
include cables, BC05D cables should be used.

NOTES:

1. DL 11-E customers must specify data rate from the following speeds: 50, 75, 134.5, 200,
300, 600, 1200, 1800, 2400, 4800, or 9600 bits per second. The following alternatives
must be specified for DL 11 s:
Character size: 5, 6, 7, or 8 data bits.
Parity: even, odd, or none.
Stop bits: 1, 1.5 (5-bit characters only), or 2 (6-8-bit characters only).

2. DL 11-WA and DL 11-WB data rates are switch-selectable and must be specified from the
following speeds: 110, 150, 300, 600, 1200, 2400, 4800, 9600 bits per second. Character formats are switch-selectable.

-74-

REAL-TIME 1/0 OPTIONS
UNIBUS REAL-TIME 1/0 OPTIONS

LPA11-K

The LPA 11-K is an intelligent controller and data mover that transfers 16-bit words between POP11 memory and specified analog-to-digital, digital-to-analog, or digital 1/0 devices.
MOUNTING NOTES: The LPA11-K mounts in one hex slot in a standard UNIBUS backplane.
It also uses the first Quad slot and the first Hex slot in the next 0011-C or 0011-0 backplane for
the LPA 11-K modules. 0011-C(or 0) is not included with this option.
Any additional slots available in the LPA11-K backplane can be used for mounting the AR11, A011K, AA 11-K, OR11-K, AM 11-K, or KW11-K 1/0 interfaces.
Mounting
Code

Bus Loads
Drawn

Power Drawn
Amps@+SV

RSX-11M, RSX-11M-PLUS
VAX/VMS

See mounting notes
5.0
LPA11
backplane:
LPA11-KF

LPA11-KK

AA11-K

8.0

Package of LPA11-K memory access controller, AOK11-KT analog to digital converter package,
and 0011-CF backplane.
Mounting
Code

Power Drawn
Amps@+SV

SU plus 1 adjacent
UNIBUS Hex slot
plus SM pan

UNIBUS:5.0
LPA11: 14.5

Bus Loads
Drawn

System Software

RSX-11M, RSX-11M-PLUS
VAX/VMS

Package of LPA11-K memory access controller, AOK11-KT analog to digital converter package
and 0011-CK backplane.
Mounting
Code

Power Drawn
Amps@+SV

SU plus 1 adjacent
UNIBUS Hex slot
plus SM pan

UNIBUS: 5.0
LPA11: 14.5

Bus loads
Drawn

System Software

RSX-11 M, RSX-11 M-PLUS
VAX/VMS

4-channel 12-bit digital-to-analog converter and scope control.
Mounting
Code

Quad slot
(UNIBUS or
LPA11-K bus)

AA11-KT

System Software

Bus loads
Drawn

Power Drawn
Amps@+SV

System Software

RT-11, RSX-11M, IAS
VAX/VMS

2.5

Package of AA 11-K digital-to-analog converter, H322 distribution panel and BCOSR cable.
Mounting
Code

Quad slot
(UNIBUS or
LPA11-K bus)
DISTRIBUTION PAN

Bus loads
Drawn

Power Drawn
Amps@+SV

System Software

RT-11, RSX-11M, IAS
VAX/VMS

2.5

-75-

UNIBUS REAL-TIME OPTIONS

AD11-K

12-bit 16-channel single-ended/8-channel true differential analog-to-digital converter with self test
and software controlled Vernier offset.
Mounting
Code

Quad slot
(UNIBUS or
LPA11-K bus)

ADK11-KT

Quad slot,
Hex slot,
(UNIBUS or
LPA11-K bus)
DISTRIBUTION PAN

DISTRIBUTION PAN

Hex slot
(UNIBUS or
LPA11-K bus)

Power Drawn
Amps@+ SY

Bus Loads
Drawn

System Software

6.5

RT-11, RSX-11 M, IAS
VAX/VMS

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

N/A

RT-11, RSX-11M, IAS
VAX/VMS

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

3.5

RT-11, RSX-11M, IAS

Package of AR11 analog real-time subsystem, H322 distribution panel and two BC08R cables
Mounting
Code

Hex slot,
(UNIBUS or
LPA 11-K bus)
DISTRIBUTION PAN
DR11-B

RT-11, RSX-11M, IAS
VAX/VMS

Analog real-time subsystem; includes 10-bit analog-to-digital, 16-channel multiplexer, sample and
hold, two 10-bit digital-to-analog converter, scope control, and crystal clock with programmable
frequencies. Normally used with BC08R cables and H322 distribution cable.
Mounting
Code

AR11-KT

3.5

System Software

48-channel single-ended 24 channel differential expander or switch gain multiplexer. 6 gain levels
per 16 channels.
PREREQUISITE: AD11-K or AD11-KT.
Mounting
Code

AR11

Bus Loads
Drawn

Package of AD11-K analog-to-digital converter, KW11-K real-time clock, H322 distribution panel
and two BC08R cables.
Mounting
Code

AM11-K

Power Drawn
Amps@+ SY

Power Drawn
Amps@+SV

Bus Loads
Drawn

System Software

3.5

RT-11, RSX-11M, IAS

Direct memory access interface. Moves data directly between user's device and memory (NPR
operation). Includes word count, current address, and data registers.
Mounting
Code

1 SU

Power Drawn
Amps@+5V

3.3

Bus Loads
Drawn

System Software

RT-11, RSX-11M, IAS
VAX/VMS

-76-

DR11-C

DR11-K

General purpose digital interface. Permits bi-directional 16-bit parallel transfers between the user's
device and the UNIBUS. Includes all necessary interrupt, address, and control signals and all
required cable connectors.
Mounting
Code

Power Drawn
Amps@+SV

Quad slot

1.5

Hex slot
(UNIBUS or
LPA11-K bus)

Hex slot,
(UNIBUS or
LPA 11-K bus)
DISTRIBUTllON PAN

Power Drawn
Amps@+SV

Bus Loads
Drawn

2.5

System Software

RT-11, RSX-11M, IAS
VAX/VMS

Power Drawn
Amps@+SV

Bus Loads
Drawn

2.5

System Software

RT-11, RSX-11M, IAS
VAX/VMS

Dual programmable real-time clock. One 16-bit clock and one 8-bit clock, 5 crystal controlled
frequencies, 1 external, 1 line frequency, and 1 special frequency, 3 Schmitt triggers and 4 modes
of operation.
Mounting
Code

Hex slot
(UNIBUS or
LPA11-Kbus)

KW11-P

RT-11, RSX-11M, IAS

Package of DR11-K general purpose digital interface, H322 distribution panel and two BCOBR
cables.
Mounting
Code

KW11-K

System Software

General purpose digital interface. Permits bi-directional 16-bit parallel transfers between the user's
device and the UNIBUS. Each input line can generate an interrupt. Includes all necessary interrupt,
address, and control signals.
Mounting
Code

DR11-KT

Bus Loads
Drawn

Power Drawn
Amps@+SV

Bus Loads
Drawn

3.0

System Software

RT-11,RSX-11M, IAS
VAX/VMS

Programmable real-time clock. Program-selectable interrupts of 100 kHz, 1O kHz, line frequency or
external signal.
Mounting
Code

Power Drawn
Amps@+SV

1 Quad slot

1.0

Bus Loads
Drawn

System Software

RT-11, RSX-11M, IAS
VAX/VMS

-77-

UNIBUS REAL-TIME OPTIONS

1/0 ACCESSORIES
H322

Distribution panel. Distributes signals from two 40-pin Berg connectors to nine 10-screw terminal
strips. Normally used with BCOBR cables.

H323-B

Table-top Analog Panel. Four channel analog potentiometer panel used in conjunction with AID
options such as the AR11 or AD11-K for the purpose of providing a variable voltage input.
PREREQUISITE: H322 distribution panel.

BCOBR-XX

Cable, berg to berg, round twisted. The following lengths are available; 20 ft. (6.1m), 25 ft. (7.6m),
50 ft. (15.2), 60 ft. (18.3m), or 100 ft. (30.5m). May be used with DR11 or AR11.

M105

Address selector module - four addresses. Power required: 0.3 Amps at +5V.

M783

Unibus transmitter module -12 drives. Power required: 0.2 Amps at +5V.

M784

Unibus receiver module - 16 receivers. Power required: 0.2 Amps at +5V.

M785

Unibus transceiver module - eight drivers, eight receivers. Power required: 0.3 Amps at +5V.

M786

General purpose interface module - 16 flip-flop register with bus receivers and transmitters.

M920

Unibus connector module - interconnects system units.

M7821

Interrupt control module - two interrupts.

-78-

INDUSTRIAL PRODUCTS

INDUSTRIAL CONTROL MICROCOMPUTERS
IP302-A
IP302-D

Industrial process 1/0 system, includes; H960 cabinet with power supply and 1/0 control (master
chassis will house up to eight process 1/0 modules), LSl-11 CPU with 56Kb MOS memory and
KEV11 extended instuction set, Boot and terminator, dual drive floppy disk (512Kb) and LA36
DECwriter II terminal. This system comes with the RSX-11S operating system.
PREREQUISITE:RSX-11 M system with floppy disk.

IP302-VA
IP302-VD

Same as IP302-A(D) except console terminal is VT100-AA.
PREREQUISITE:RSX-11 M system with floppy disk.

IP302-E
IP302-J

Same as IP302-A(D) except unsupported RSX-11 S.

IP302-VE
/P302-VJ

Same as IP302-E(J) except console terminal is VT100-AA.

UNPACKAGED INDUSTRIAL CONTROL MICROCOMPUTERS
IP302-XK
IP302-XN

Industrial process 1/0 system, includes; 1/0 control (master chassis will house up to eight process
1/0 modules), LSl-11 CPU with 56Kb MOS memory and Boot and terminator. This system comes
with the RSX-11 S Category D license.
PREREQUISITE:RSX-11 Son IP300/IP302 subsystem or on RSX-11 M development system.

LSI-BUS INDUSTRIAL 1/0 SUBSYSTEM
IPV12-AA
IPV12-AD

Industrial process 1/0 system, includes; H960 cabinet with power supply and 1/0 control (master
chassis will house up to ten process 1/0 modules). Software documentation is included.
PREREQUISITE:RSX-11 M Operating System V 3.2 or RSX-11 S Operating System V 2.2

UNIBUS INDUSTRIAL 1/0 SUBSYSTEM
IP112-AA
IP112-AD

Industrial process 1/0 system, includes; H960 cabinet with power supply and 1/0 control (master
chassis will house up to eight process 1/0 modules). Software documentation is included.
PREREQUISITE:RSX-11 M Operating System V 3.2

IP113-AA
IP113-AD

-79-

INDUSTRIAL PRODUCTS

1/0 SUBSYSTEM CABINET
H9646-AC
H9646-AD

60in H Cabinet includes power supply and fans

DISTRIBUTED PLANT MANAGEMENT SYSTEMS (DPM)
DPM HOST SYSTEM KITS

DPM 2M-AD

DPM system kit for RSX-11 M host with full software support.
Distribution media: BOObpi magtape.
PREREQUISITE:RSX-11 M Operating System

DPM 2M-AH

DPM system kit for RSX-11 M host with full software support.
Distribution media: RL02 disk.
PREREQUISITE:RSX-11 M Operating System

DPM 2M-AM

DPM system kit for RSX-11 M host with full software support.
Distribution media: 1600bpi magtape.
PREREQUISITE:RSX-11 M Operating System

DPM2M-DZ

DPM system kit for RSX-11 M host (license only).
Distribution media: BOObpi magtape (diagnostics only).
PREREQUISITE:RSX-11 M Operating System

DPM 2M-DH

DPM system kit for RSX-11 M host (license only).
Distribution media: RL02 disk (diagnostics only).
PREREQUISITE:RSX-11M Operating System

DPM 2M-DM

DPM system kit for RSX-11 M host (license only).
Distribution media: 1600bpi magtape (diagnostics only).
PREREQUISITE:RSX-11 M Operating System

DPM 2N-AM

DPM system kit for RSX-11 M-PLUS host with full software support.
Distribution media: 1600bpi magtape.
PREREQUISITE:RSX-11 M-PLUS Operating System

DPM 2N-DM

DPM system kit for RSX-11 M-PLUS host (license only).
Distribution media: 1600bpi magtape (diagnostics only).
PREREQUISITE:RSX-11 M-PLUS Operating System

DPM4X

Factory upgrade from two to four DECdataways for PDP-11 /70 hosts.
PREREQUISITE:DPM 2M-AD/DZ

-80-

DATAWAY CONNECTOR SETS

DPMXX-A

DPM installation kit with tool.

DPMXX-B

DPM installation kit without tool.

DPM TERMINALS

RT801-AA
RT801-AB

Time and attendance terminal.

RT803-AA
RT803-AB

Basic work station.

RT805-AA
RTBOS-AB

Area work station.

RT805-XC

20 mA current loop and cable for RT805.

RT805-XD

Digital 110 and cable for RT805.

MULTIPLEXERS

DPM01-AA
DPM01-AB

Four line dataway Mux.

VT110-AA
VT110-AB

VT100-AA video display terminal with DPM01-MS module set.

1/0 SUBSYSTEMS

DPM23-A
DPM23-D

Programmable Dataway subsystem with full software support (RXS-11S). 11/23 CPU with 64Kb
MOS memory.

DPM23-K
DPM23-N

Programmable Dataway subsystem (license only). (RXS-11S). 11/23 CPU with 64Kb MOS memory.

DPM23-CA
DPM23-CD

Programmable Dataway subsystem with full software support (RXS-11 S) mounted in H9646 cabinet. 11 /23 CPU with 64Kb MOS memory.

DPM23-CK
DPM23-CN

Programmable Dataway subsystem (license only). (RXS-11S) mounted in H9646 cabinet. 11/23
CPU with 64Kb MOS memory.

-81-

INDUSTRIAL PRODUCTS

DPM50-AA
DPM50-AB

LSl-11 based intelligent 1/0 subsystem license only.

DPM50-CA
DPM50-CB

LSl-11 based intelligent 1/0 subsystem with full software support.

DPM50-FA
DPM50-FB

11 /23 based distributed 1/0 subsystem license only.

DPM50-HA
DPM50-HB

11 /23 based distributed 1/0 subsystem with full software support.

1/0 SUBSYSTEMS MODULES AND OPTIONS

A014

Analog to Digital Converter with 16 single-ended or 8 differential input channels.

A020

Analog to Digital Converter with 16 single-ended or 8 differential input channels.

A156

MUX for 32 single-ended or 16 differential channels for A014.

A157

Programmable gain MUX for 16 differential channels for A014.

A630

Four channel digital to analog output.

ATR16

16 channel thermocouple temperature reference panel.

BC40-A

Screw terminal strips and cable for all modules except M5013, M6012, M6013.

BC40-B

Screw terminal strips and cable for M5013, M6012, M6013.

BC40-L

Screw terminal strips and cable for customer use.

G7272

LSl-11 bus continuity module.

H332

1Oslot screw terminal mounting rack.

H334-E
H334-J

1/0 expansion chassis with power.

M5010

32-bit non-isolated DC sense input module.

M5011

16-bit non-isolated DC interrupt input module.

M5012

16-bit isolated DC sense input module.

-82-

M5012-YA

16-bit isolated DC sense with TTL compatible inputs.

M5013

8-bit isolated AC sense input module.

M5014

16-bit dual input counter.

M5016

16-bit quad input counter.

M5031

16-bit isolated DC input module.

M6010

32-bit non-isolated DC output module.

M6010-YA

32-bit non-isolated DC with TTL compatible outputs.

M6011

16-bit single shot DC output module.

M6012

8-bit isolated DC output module.

M6013

8-bit isolated AC output module.

M6014

16-bit dual output generator.

M6015

16-bit isolated retentive DC output module (also operates as a isolated DC output module).

-83-

INDUSTRIAL PRODUCTS

THIS PAGE LEFT INTENTIONALLY BLANK

-84-

RT-11 SYSTEM SOFTWARE
(QJ013} RT-11 OPERATING SYSTEM
DESCRIPTION: RT-11 is a disk based, single-user real time operating system designed for interactive program development and
on-line processing of application programs on the PDP-11 or PDT-11.
RT-11 supports both single job and foreground/background modes of processing. In addition to a variety of system and program
development utilities, RT-11 offers optional support of a number of high-level language processors, including FORTRAN IV,
BASIC, MU BASIC, APL, MACRO, and FOCAL.
The operating system is designed for the single interactive user, with English language commands that are consistent in format
and easy to understand. System messages are clear and concise.
Other features include: contiguous file structure providing fast and efficient file manipulation, device-independent 110 programming, flexible real-time 1/0, memory management support, limited multi-terminal support, low system overhead and ease of
expansion. RT-11 also supports industry compatible magnetic tape, and batch processing.

Support
Category

Option
Number

Distribution
Medium

QJ013-AC
QJ013-AD
QJ013-AE
QJ013-AQ
QJ013-AT
QJ013-AY
QJ013-AX

DECtape
Magtape (800 bpi 9-tr)
DECpack (RK05)
DECpack (R(01)
DECpack (RK06)
Floppy Disk (RX01)
Floppy Disk (RX02)

A
A
A
A
A
A

Additional Software for RT-11 Systems
(QJV13} RT 2
DESCRIPTION: RT 2 is a license to use a subset of the RT-11 Version 03B software on a LSl-11 based system with an RK05,
RL01, RX01 or RX02 floppy disk as the system device. RT 2 software provides a single job or foreground/background executeonly environment for applications developed on an RT-11 Version 03B system. It is the user's responsibility to transport the RT 2
software and the user developed software from the RT-11 Version 03B system to the target RT 2 system.

Option
Number

Distribution
Medium

Support
Category

QJV13-DZ

No Hardware Dependency

(QJV41} PDT-11 2780/3780 Protocol Emulator
DESCRIPTION: The PDT-11 2780/3780 Protocol Emulator provides a PDT-11/130 or PDT-11/150 system with communications capabilities similar to IBM 2780 and 3780 remote batch terminals. The Emulator runs as a background program under the
RT-11, Version 03B Foreground/Background monitor with PDT-11 support. No other programs may be run concurrently. The
Emulator accepts commands interactively or from indirect command files with special operator commands provided for operation in unattended environments. The Emulator supports operation of a single full- or half-duplex synchronous line at transmission speeds up to 4800 bits per second. Support for automatic answer to incoming calls is also available for use with modem
packages providing this capability.
MINIMUM HARDWARE REQUIRED: PDT-11/150 with dual floppies and 32K bytes of memory or a PDT-11/130with dual TU58s
and 32K bytes of memory. If the PDT is also to be used to generate the 2780/3780, then 60K bytes are required.
A PDP-11 System with 32K bytes of memory running RT-11 Version 03B with PDT Compatible media for generating the PDT-11
2780/3780, if the 2780/3780 is not to be generated on the run-time PDT.
PREREQUISITE SOFTWARE: RT-11 Version 03B operating system with PDT-11 support running on the PDT-11/130 or PDT11 /150
RT-11 Version 03B operating system running on a PDP-11 for generation of the PDT-11 2780/3780.

Option
Number

Distribution
Medium

Support
Category

QJV41-AG
QJV41-AY

Magtape Cassette (TU58)
Floppy Disk (RX01)

-85-

A
A

SOFTWARE
RT-11
(QJD58) RT-11/LSl-11 2780
DESCRIPTION: RT-11/LSl-11 2780 provides emulation of an IBM 2780 remote batch terminal. It runs under the RT-11
Foreground/Background monitor on a suitably equipped RT-11 (Version 2C or later) system. Any disk device supported by RT11 for the LSl-11 can be used as a source of transmission files. Any disk or line printer supported by RT-11 for the LSl-11 can be
used to receive files.
RT-11 /LSl-11 2780 will run at modem speeds up to 2400 bits per second, in either foreground or background. No other tasks
may run concurrently with the 2780 emulator.
MINIMUM HARDWARE REQUIRED: Any valid LSl-11 based RT-11 Foreground/Background system configuration which includes: at least 32K bytes of memory for 2780 operation in the background, at least 48K bytes of memory for 2780 operation in
the foreground, a disk device, DUV11 Synchronous Line Interface, REV11-A or -B bootstrap with memory refresh terminator and
a Terminal (LA32, VT52).
PREREQUISITE SOFTWARE: RT-11 operating system, Version 2C or later.

Option
Number

Distribution
Medium

QJD58-AE
QJD58-AQ
QJD58-AY

DECpack (RK05)
DECpack (RL01)
Floppy Disk (RX01)

Support
Category
A
A
A

(QJ813) FORTRAN IV/RT-11
DESCRIPTION: FORTRAN IV /RT-11 is an extended superset of the ANSI standard FORTRAN IV language. Its features include:
fast compile time, optimized output for fast execution, very efficient code generation, and direct access 1/0. The compiler and
run time system can be effectively utilized in 16K bytes of memory.

Option
Number

Distribution
Medium

Support
Category

QJ813-AC
QJ813-AD
QJ813-AE
QJ813-AG
QJ813-AQ
QJ813-AT
QJ813-AY

DECtape
Magtape (800 bpi 9-tr)
DECpack (RK05)
DECtape II (TU58)
DECpack (RL01)
DECpack (RK06)
Floppy Disk (RX01)

B
B
B
B
B
B
B

(QJ913) BASIC-11/RT-11
DESCRIPTION: BASIC-11/RT-11 is a software language which offers the user upward compatibility with BASIC-PLUS-2.
Features include integer data type and double precision data type for more efficient code and computational precision, new
functional commands and statements, longer string lengths, FORTRAN IV-compatible call interface, and greater speed through
FIS support. BASIC-11 /RT-11 also offers support of lower case, especially in strings, and offers easier program development.

Option
Number

Distribution
Medium

Support
Category

QJ913-AC
QJ913-AD
QJ913-AE
QJ913-AG
QJ913-AQ
QJ913-AT
QJ913-AY

DECtape
Magtape (800 bpi 9-tr)
DECpack (RK05)
DECtape II (TU58)
DECpack (RL01)
DECpack (RK06)
Floppy Disk (RX01)

B
B
B
B
B
B
B

(QJ830) BASIC-11/RT-11 EXTENSIONS
DESCRIPTION: This software includes RT-11 BASIC and BASIC calls to support AID and DI A converters, digital 1/0, graphics
processors and terminals.
This package can be supported by any RT-11 system with an appropriate graphics or real-time device.

Option
Number

Distribution
Medium

Support
Category

QJ830-CD
QJ830-CE
QJ830-CY

Magtape(9-tr)
Disk Cartridge(RK05)
Floppy Disk (RX01)

-86-

c
c

(QJ921) MU BASIC/RT-11
DESCRIPTION: MU BASIC/RT-11 is a multi-user Dartmouth standard BASIC language processor implemented as an incremental compiler.
It can be supported by any RT-11 system with at least 56K bytes of memory.

Option
Number

Distribution
Medium

Support
Category

QJ921-AE
QJ921-AG
QJ921-AQ
QJ921-AY

DECpack(RK05)
DECtape II (TU58)
DECpack (RL01)
Floppy Disk (RX01)

B
A
A

(QJ922) FOCAL/RT-11
DESCRIPTION: FOCAL/RT-11 is simple, yet powerful interactive programming language which provides a complete set of
statements to perform arithmetic operations, program control and 1/0 operations. FOCAL gives the user access to the RT-11 file
system for program and data storage/retrieval. Included in FOCAL are support for: double precision (17 decimal digits), calls to
drive A/D and DI A converters, digital 1/0, graphics processors and terminals. FOCAL/RT-11 can be supported by any RT-11
system with at least 16K bytes of memory (32K bytes of memory for double-precision).

Option
Number

Distribution
Medium

Support
Category

QJ922-AC
QJ922-AE
QJ922-AY

DECtape
Disk Cartridge(RK05)
Floppy Disk (RX01)

B
B

(QJ907) APL-11 with RT-11
DESCRIPTION: APL (A Programming Language) is a mathematically-structured programming language used extensively in
science, engineering, education, and business. Using APL-11, variables can be examined and changed; statements can be
altered without recompilation; and program action can be readily traced. Features of APL-11 include dynamically variable user's
workspace size, chaining of APL programs to previously prepared run-time programs, multiple statement lines, standard PDP11 file naming formats, and extended single operators which allow the user to fully evaluate character strings and write userdefined functions to perform output formatting and function editing.
APL-11 supports any mass storage, unit record, or terminal device supported by RT-11.

Support
Category

Option
Number

Distribution
Medium

QJ907-CC
QJ907-CD
QJ907-CE
QJ907-CQ
QJ907-CT
QJ907-CY

DECtape
Magtape (9-tr)
Disk Cartridge (RKOS)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Floppy Disk (RX01)

c
c
c

(QJ647) FORTRAN Graphics Package
DESCRIPTION: The FORTRAN Graphics Package is a collection of FORTRAN-callable routines for users of FORTRAN on RT11 operating systems who wish to use the graphics capabilities of the VT11 or VS60 display processors. The package includes
DECgraphic-11 routines for the VT11 and VS60 display processors.
The FORTRAN Graphics Package can be supported by any valid RT-11 operating system configuration supporting FORTRAN
IV /RT-11 and which includes at least 32K bytes of memory.
The user must have RT-11 and FORTRAN IV /RT-11.

Option
Number

Distribution
Medium

Support
Category

QJ647-XD
QJ647-XE
QJ647-XQ
QJ647-XT

Magtape (9-tr)
DECpack (RK05)
DECpack (RL01)
DECpack (RK06)

-87-

B
B
B
B

SOFTWARE
RT-11
(QJ960) SSP-11 SCIENTIFIC SUBROUTINE PACKAGE
DESCRIPTION: The Scientific Subroutine Package is a collection of one hundred or more FORTRAN subroutines which
provide the user with a large cross-section of those mathematical and statistical routines commonly required in scientific
programming.
Software components include FORTRAN-callable subroutines supplied in source form.
The Scientific Subroutine Package can be supported by any RT-11 plus FORTRAN IV or RSX-11 M plus FORTRAN IV or RSX-11 M
plus FORTRAN IV-PLUS configurations with peripherals matching one of the distribution media listed below.

Option
Number

Distribution
Medium

Support
Category

QJ960-AD
QJ960-AE
QJ960-AQ
QJ960-AT
QJ960-AY

Magtape (9-tr)
DECpack (RKOS)
DECpack (RL01)
DECpack (RK06)
Floppy Disk (RX01)

B
B
B
B
B

(QJ015) INSTRUMENT Bus Subroutines
DESCRIPTION: The INSTRUMENT Bus Subroutines (IBS) consist of a library of FORTRAN callable subroutines to support the
IB11 and IBV11-A interface (from an IEEE-488-1975 General-Purpose Instrument Bus) and a special device handler that is called
by routines in the library. IBS allows the user to control the IEEE Bus by sending commands and controlling data transfer on as
many as eight IB boards. It also allows the user to specify a FORTRAN completion routine that will be entered asynchronously
when any device on the IEEE bus asserts the Service Request Bus Line.
PREREQUISITE SOFTWARE: RT-11Version3 or Version 03B and FORTRAN Version 2 or later.

Support
Category

Option
Number

Distribution
Medium

QJ015-CE
QJ015-CQ
QJ015-CY

DECpack (RKOS)
DEC pack (RL01)
Floppy Disk (RX01)

c
r,

(QJ980) FORTRAN IV/RT-11 EXTENSIONS
DESCRIPTION: This software package provides the FORTRAN user with: real-time support for AID and DI A converters, digital
1/0, graphics processors and terminals, and a symbolic debugger. It also includes the RT-11 FORTRAN compiler and run-time
system (QJ813).
RT-11 /FORTRAN & EXTENSIONS can be supported by any RT-11 system with at least 32K bytes of memory.

Option
Number

Distribution
Medium

Support
Category

QJ980-AD
QJ980-AE
QJ980-AQ
QJ980-AT
QJ980-AY

Magtape (9-tr)
DECpack (RKOS)
DECpack (RL01)
DECpack (RK06)
Floppy Disk (RX01)

B
B
B
B
B

(QJ685) DECnet/RT-11
DESCRIPTION: DECnet/RT-11 allows a suitably configured RT-11 system to participate as a phase II DECnet node in point-topoint computer networks. DECnet/RT-11 offers task-to-task communication, network file transfer, and network resource sharing
capabilities using the DIGITAL Network Architicture (DNA) Protocols.
DECnet/RT-11 is avaiable as an enhancement to any valid RT-11 system with 16K bytes of additional avaiable memory and one
or more of the following communication devices: DU11-DA, DUP11-DA, DMC11-AL,-MD, DMC11-AL,-MA, DL11-E, DL11-C, or
DL 11-WA. Note: PDP-11/03 central processors must use the following communication devices: DUV11-DA or DLV11-E.

Support
Category

Option
Number

Distribution
Medium

QJ685-AD
QJ685-AE
QJ685-AG
QJ685-AM
QJ685-AQ
QJ685-AT
QJ685-AV
QJ685-AY

Magtape (800 bpi 9-tr)
DECpack (RKOS)
DECtape II (TU58)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)
Floppy Disk (RX01)
-88-

A
A
A
A
A
A
A
A

(QJD63) RT-11/2780
DESCRIPTION: The RT-11 /2780 Emulator runs under the RT-11 Foreground/Background monitor on a suitably equipped RT11 system, providing emulation of an IBM 2780 Remote Batch Terminal. Any RT-11 supported disk device, card reader, or paper
tape reader can be used as a source of transmission files; any supported disk device or line printer can be used to recieve files.
RT-11/2780 can be supported by any valid RT-11 configuration with at least 32K bytes of memory for 2780 operation in the
background; at least 48K bytes of memory for 2780 operation in the foreground; KW11-L line frequency clock; and suitable disk
device. The user must also have: a DU11 or DUP11 synchronous line interface; and KG11-A Communications Arithmetic
Element.
Option
Number

Distribution
Medium

QJD63-AC
QJD63-AD
QJD63-AE
QJD63-AQ
QJD63-AV
QJD63-AY

DECtape
Magtape (9-tr)
DECpack (RK05)
DECpack (RL01)
DECpack (RK07)
Floppy Disk (RX01)

Support
Category

A
A
A

(QJ713) FMS-11
DESCRIPTION: FMS-11 is a set of utilities and subroutines that provides a multi-terminal video forms capability for programs
written in MACR0-11, BASIC-11 or FORTRAN IV under the RT-11 operating system. Forms defined using FMS-11 can use the
following features of DIGITAL's VT100 terminal: reverse video, bold, underline, blink, 132-column lines, jump and smooth
scrolling, split screen and reverse screen. FMS-11 applications may be developed under RT-11 operating system and executed
under the control of either RT-11 or its execute-only subsets, RT2 or RT2 /PDT.
The FMS-11 system can be used as a front end in traditional source data entry applications, and also as a general purpose
manager of formatted operator 110 to programs written in any of the supported languages.
Option
Number

Distribution
Medium

QJ713-AE
QJ713-AG
QJ713-AQ
QJ713-AY

DECpack (RK05)
Magtape Cassette (TU58)
Disk Cartridge (RL01)
Floppy Disk (RX01)

Support
Category

-89-

A
A
A
A

SOFTWARE
RSX-11 M
RSX-11M SYSTEM SOFTWARE
(QJ738) RSX-11M OPERATING SYSTEM
DESCRIPTION: RSX-11 M is a highly responsive, event driven, multiprogramming operating system designed for real-time
process control, communications, and information management systems. The functionality, and thus the size of the executive
software may be tailored to the application's needs; from a small, dedicated laboratory controller to a large, complex multi-user
data acquisition, control, and retrieval system.
FEATURES: RSX-11M is an extremely flexible operating system. It imposes no requirements for division of memory into
partitions when memory management hardware is present. The system dynamically schedules the execution of program units
(tasks) according to a set of application defined priorities using all available memory. The association of specific tasks with
predefined memory partitions is possible for optional use in highly time-critical applications.
A round-robin scheduler can be selectively used for multi-user program development and real-time operations. The checkpointing feature insures the effective use of main memory.
Tasks can be written in MACR0-11, FORTRAN IV, FORTRAN-IV-PLUS, COBOL-11, BASIC-11, BASIC-PLUS-2, or CORAL-66. A
comprehensive library of multi-language interfaces to executive functions is provided, giving the high-level language and
assembly language programmer easy access to powerful system functions.

Option
Number

Distribution
Medium

Support
Category

System Disk Type

QJ738-AD
QJ738-AQ

Magtape (9-tr)
DECpack (RL01)

A
A

RL01
RL01

QJ629-AD
QJ629-AT

Magtape (9-tr)
DECpack (RK06)

A
A

RK06
RK06

QJ739-AD
QJ739-AV

Magtape (9-tr)
DECpack (RK07)

A
A

RK07
RK07

QJ737-AD

Magtape (9-tr)

RM02, RM03

Additional Software for RSX-11 M Systems
(QP230) FORTRAN IV
DESCRIPTION: FORTRAN IV is a superset of the ANSI FORTRAN IV language. Some of its features are: fast compile time,
optimized output for fast execution, very efficient code generation, and direct access 1/0. Also: in-line code generation, memorysupported multiple virtual arrays, additional compiler optimization algorithms, and FORTRAN-IV-PLUS language extensions.

Option
Number

Distribution
Medium

Support
Category

QP230-AD
QP230-AE
QP230-AM
QP230-AQ
QP230-AT
QP230-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

B
B
B
B
B
B

(QP100) FORTRAN IV-PLUS
DESCRIPTION: The FORTRAN IV-PLUS compiler produces direct PDP-11 machine code optimized for execution time efficiency on a PDP-11 with floating point processor. It is a superset of ANSI standard FORTRAN and features a virtual memory
compilation technique that allows large FORTRAN programs to be compiled in a relatively small user partition.
This language can be supported by any RSX-11 M system running on a hardware configuration with a floating point unit or a
parallel floating point processor.

Support
Category

Option
Number

Distribution
Medium

QP100-AD
QP100-AE
QP100-AM
QP100-AQ
QP100-AT
QP100-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)
-90-

A
A
A
A
A
A

(QJD68) RSX-11 M/2780
DESCRIPTION: RSX-11 M/2780 runs as a privileged task under a suitably equipped RSX-11 M system, providing emulation of an
IBM 2780 remote batch terminal. It will support transmission and reception from/to card reader and line printer, and/or mass
storage devices. RSX-11 M/2780 will transmit files stored on any input medium and store files on any output medium accessible
through RSX-11 M Files Control System (FCS) except DECtape.

Option
Number

Distribution
Medium

Support
Category

QJD68-AD
QJD68-AE
QJD68-AM
QJD68-AQ
QJD68-AT
QJD68-AV

Magtape (9-tr)
Disk Cartridge (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
Disk Cartridge (RK06)
DECpack (RK07)

A
A
A
A
A
A

(QP376) DBMS-11/RSX-11M
DESCRIPTION: DBMS-11 /RSX-11 M is an implementation of CODASYL Specified Data Base facility. It provides data base
management facilities for PDP-11 COBOL and FORTRAN programs and any other host language which supports a CALL
statement such as BASIC-11/IAS-RSX, and MACR0-11. DBMS-11 provides separate language facilities for the description of
data and the manipulation of data. This separation of data description provides for data independance and the integration of all
data and data relations into a data base which is common to all applications programs sharing the data.
This software can be supported by any RSX-11 M system with at least 256K bytes of memory, line printer, magnetic tape
subsystem, and sufficient mass storage for the data base.

Option
Number

Distribution
Medium

Support
Category

QP376-AD
QP376-AM
QP376-AT

Magtape (9-tr)
Magtape (1600 bpi 9-tr)
Disk Cartridge (RK06)

A
A
A

(QP240) BASIC-11/IAS-RSX
DESCRIPTION: BASIC 11 /IAS-RSX is an incremental, interactive, interpretive compiler. Its features include strings, chaining,
overlay support, virtual memory (direct access) files, real-time support and a "CALL" statement for assembly language routine
interfacing.

Option
Number

Distribution
Medium

Support
Category

QP240-AD
QP240-AE
QP240-AM
QP240-AQ
QP240-AT
QP240-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

B
B

B
B
B
B

(QJ918) PDP-11 BASIC-PLUS-2
DESCRIPTION: BASIC-PLUS-2 is an outgrowth of the Dartmouth BASIC language. In addition to the elementary BASIC
statements, BASIC-PLUS-2 features a number of powerful enhancements which allows the user to create programs which are
more complex and more efficient than those written with BASIC.

Option
Number

Distribution
Medium

Support
Category

QJ918-AD
QJ918-AE
QJ918-AM
QJ918-AQ
QJ918-AT
QJ918-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

-91-

A
A

A
A
A
A

SOFTWARE
RSX-11 M
(QP012) PDP-11 COBOL
DESCRIPTION: PDP-11 COBOL-11 is a precise, well-defined language processor for business data processing. It is a mature
compiler that conforms to the 1974 ANSI specification.

Option
Number

Distribution
Medium

QP012-AD
QP012-AE
QP012-AM
QP012-AQ
QP012-AT
QP012-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DEC pack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category
A
A
A
A
A
A

(QP066) CORAL 66
DESCRIPTION: CORAL 66 is a high-level block-structured programming language. It is the standard general purpose language prescribed by the British Government for real-time and process control applications. This language is designed to replace
assembly level programming in modern industrial and commercial applications. It is generally used for long-life products where
ease of maintenance and flexibility are required.
The PDP-11 CORAL 66 compiler operates under the RSX-11 M operating system. It features: BYTE, LONG (32-bit integer) and
DOUBLE (64-bit floating point) numeric types; re-entrant code at the procedure level; executable code generation; switchable
option to select target PDP-11 computer instruction sets, optimized code generation; bounds-checking array-type variables; and
conditional compilation of defined parts of the source code.

Option
Number

Distribution
Medium

QP066-AD
QP066-AE
QP066-AM
QP066-AQ
QP066-AT
QP066-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category
A
A
A
A
A
A

(QJ747) FORTRAN Graphics Package
DESCRIPTION: The FORTRAN Graphics Package is a collection of FORTRAN-callable routines for users of FORTRAN on RSX11 M operating systems who wish to use the graphics capabilities of the VT11 or VS60 display processors. The package includes
DECgraphic-11 routines for the VT11 and VS60 display processors.
The FORTRAN Graphics Package can be supported by any valid RSX-11 M operating system configuration supporting either
FORTRAN IV /I AS-RSX or FORTRAN IV-PLUS and which includes 32K bytes of memory.
The user must have RSX-11M, and either FORTRAN IV/IAS-RSX or FORTRAN IV-PLUS.

Option
Number

Distribution
Medium

QJ747-XD
QJ747-XE
QJ747-XM
QJ747-XQ
QJ747-XT

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DEC pack (RL01)
DECpack (RK06)

Support
Category
B
B
B
B
B

(QJ962) SSP-11 SCIENTIFIC SUBROUTINE PACKAGE
DESCRIPTION: The Scientific Subroutine Package is a collection of over one hundred FORTRAN subroutines which provide
the user with a large cross-section of those mathematical and statistical routines commonly required in scientific programming.
Software components include FORTRAN-callable subroutines supplied in source form.
The Scientific Subroutine Package can be supported by any RSX-11M configuration with FORTRAN IV or FORTRAN IV-PLUS
and peripherals matching one of the distribution media listed below.

Option
Number

Distribution
Medium

QJ962-AD
QJ962-AE
QJ962-AM
QJ962-AQ
QJ962-AT
QJ962-AY

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
Floppy Disk (RX01)

Support
Category

-92-

B
B
B
B
B
B

(QP901) RMS-11 K
DESCRIPTION: RMS-11 K provides keyed access record management services for the RSX-11 M operating system. RMS-11 K
comprises a set of run-time service routines and utility programs that enable keyed access data files to be defined, populated,
updated, and maintained on direct access storage devices. The RMS-11 K run-time service routines provide an interface between
PDP-11 multi-programming operating systems and user developed applications programs.

Support
Category

Option
Number

Distribution
Medium

QP901-AD
QP901-AE
QP901-AM
QP901-AQ
QP901-AT
QP901-AV

Magtape (9-tr)
DECpack (RKOS)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

A
A
A
A
A
A

(QP301) DATATRIEVE-11/RSX-11M
DESCRIPTION: DATATRIEVE-11 is an interactive query, report, and data maintenance system designed for unsophisticated
computer users. DATATRIEVE-11 includes the RMS-11K software and utilizes the RMS-11K record management services to
access data contained in files of sequential, indexed, or relative organization. It also provides facilities for selective data retrieval,
sorting, formatting, updating, and report generation without programming overhead.

Option
Number

Distribution
Medium

Support
Category

QP301-AD
QP301-AE
QP301-AM
QP301-AQ
QP301-AT
QP301-AV

Magtape (9-tr)
DECpack (RKOS)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

A
A
A
A
A
A

(QP602) SORT-11
DESCRIPTION: SORT-11 is an independent utility that can be run under the control of the RSX-11 M operating system. SORT
provides four different efficient sorting procedures which are selectable by user commands. Any RMS file can be used as an
input file and may be processed with a maximum of 10 sort keys.
To run SORT-11, the user must have RMS-11 or RMS-11K installed in RSX-11M.

Support
Category

Option
Number

Distribution
Medium

QP602-AD
QP602-AE
QP602-AM
QP602-AQ
QP602-AT
QP602-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

A
A
A
A

A
A

(QJ684) DECnet-11 M
DESCRIPTION: DECnet-11 M, allows a suitably configured RSX-11 M system to participate as a Phase Ill DECnet node in point-topoint and multipoint computer networks. DECnet-11 M offers task-to-task communications, network file transfer, and network
resource-sharing capabilities, using the DIGITAL Network Architecture (DNA) protocols. Adaptive routing provides the ability to
transfer information efficiently between non-adjacent nodes. Access to DECnet-11 M is supported for RSX-11 M user programs
written in MACR0-11 and FORTRAN.

Support
Category

Option
Number

Distribution
Medium

QJ684-AD
QJ684-AE
QJ684-AH
QJ684-AM
QJ684-AQ
QJ684-AT
QJ684-AV

Magtape (800 bpi 9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL02)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

-93-

A
A
A
A
A
A
A

SOFTWARE
RSX-11 M

(QJD69) RSX-11M/SNA PE
DESCRIPTION: RSX-11 M/SNA Protocol Emulator provides the SNA (Systems Network Architecture) protocol emulation
required for DIGITAL systems to participate in an IBM SNA environment.
Option
Number

Distribution
Medium

Support
Category

QJD69-AD
QJD69-AE
QJD69-AH
QJD69-AM
QJD69-AQ
QJD69-AT
QJD69-AV

Magtape (800 bpi 9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL02)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

A
A
A
A
A
A
A

(QJ070) MUX200/RSX
DESCRIPTION: MUX200/RSX is a PDP-11 based software package which provides communication with a host Control Data
Corporation (CDC) 6000 or CYBER series computer system. MUX200/RSX greatly facilitates communications to/from the host
computer system and includes the following features: enables output recieved from the host to be spooled to a line printer; allows
up to 8 datasets to transmit to the host at a single command; reduces host and/or line costs by utilizing local processing power;
replaces terminal with user-written tasks; and allows terminals to be detached while the software package is operating.
MUX200/RSX can be supported by any valid RSX-11M operating system which includes: at least 32K bytes of memory for a
single-terminal configuration; and at least 4K bytes of memory for each additional terminal. A DU11 synchronous line interface
and appropriate modem is also required.
Support
Category

Option
Number

Distribution
Medium

QJ070-AD
QJ070-AE
QJ070-AM
QJ070-AT

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RK06)

A
A
A
A

(QJD76) RSX-11 M/3271 Protocol Emulator (PE)
DESCRIPTION: The RSX-11 M/3271 Protocol Emulator (PE) permits applications tasks running under RSX-11 M to communicate interactively with tasks in an IBM 360 or 370 system. It is a tool to aid In implementing complex applications requiring on-line
information entry and retrieval, file transfer and intertask communications capabilities between IBM 360 or 370 and RSX-11 M
systems.
The user task in RSX-11M presents itself to the IBM system as an IBM 3277 display unit attached to an IBM 3271 control unit
operating in slave mode.
The emulator operates as a device driver under RSX-11 M, maintaining the synchronous line discipline on one side and interfacing with the user tasks on the other. The PE module supports up to six synchronous lines, each of which can be viewed by the 360
or 370 as a 3271 controller. The theoretical maximum number of RSX-11 M user tasks that can be supported by each pseudo
controller is 32. The maximum number of supported lines and user tasks is a function of application requirements and buffer
constraints.
PREREQUISITE SOFTWARE: RSX-11 M operating system, Version 3.1 or later.
A master/host system running one of the following operating systems and applications task interfaces or equivalent: OS,
CICS/OS Standard Version 2, OS/VS1 or OS/VS2 or DOS/VS, CICS/VS, IMS/VS, Version 1.1.
Support
Category

Option
Number

Distribution
Medium

QJD76-AD
QJD76-AE
QJD76-AM
QJD76-AQ
QJD76-AT
QJD76-AV

Magtape (800 bpi 9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

-94-

A
A
A
A
A
A

(QJ170) UN1004/RSX
DESCRIPTION: The UN1004/RSX product is a PDP-11 based software communication emulator to a UNIVAC 1100 Series
Computer System. The software operates under the RSX-11M operating system and provides remote batch terminal or remote
batch entry terminal emulation capability using the UNIVAC 1004 communications protocol and the XS-3 code. This product
provides support for: one synchronous line to a UNIVAC 1100 Series Computer System; line communication over switched or
unswitched common carrier line interfaces; up to 4800 baud on the synchronous line interface; and one (1) on-line full duplex
terminal over a single two wire or four wire synchronous line.
UN1004/RSX can be supported by any valid RSX-11 M configuration with: 16K byte and 6K byte task partition space; and a DU11
synchronous line interface.

Support
Category

Option
Number

Distribution
Medium

QJ170-AD
QJ170-AE
QJ170-AM
QJ170-AT

Magtape (9-tr)
DECpack (RKOS)
Magtape (1600 bpi 9-tr)
DECpack (RK06

A
A
A

{QJ733) COMM IOP-DZ for RSX-11 M
DESCRIPTION: The COMM IOP-DZ is an intelligent direct memory access (OMA) controller for asynchronous terminal communications lines. The COMM IOP-DZ performs OMA message assembly on reception and disassembly on transmission. The
COMM IOP-DZ relieves the PDP-11 central processor of many of the tasks associated with handling asynchronous terminal lines.
The COMM IOP-DZ software consists of a KMC11-A microprogram and a microprogram loader. The loader runs as a privileged
task under the RSX-11 M operating system.
In addition to the buffer descriptor lists, COMM IOP-DZ also uses 128-byte Functional Mode Control Tables defined by the driver
in main memory space. These tables enable the driver to control how the COMM IOP-DZ processes any given input character. As
many as eight Functional Mode Control Tables can be assigned to a given line, enabling the COMM IOP-DZ to recognize and
process multiple-character sequences. Tables can be shared by multiple lines.
MINIMUM HARDWARE REQUIRED: Any PDP-11 UNIBUS processor with: sufficient available main memory for the user-written
driver and buffers during system operation, and for the COMM IOP-DZ microprogram loader at system startup, a KMC11-A
auxiliary processor, a DZ11 asynchronous line multiplexer.A valid RSX-11 M operating system configuration is required for
executing the COMM IOP-DZ microprogram loader.

Support
Category

Option
Number

Distribution
Medium

QJ733-CD
QJ733-CE
QJ733-CT
QJ733-CY

Magtape (9-tr)
DECpack (RKOS)
DECpack (RK06)
Floppy (RX01)

c
c
c
c

(QJ734) COMM IOP-DUP for RSX-11 M
DESCRIPTION: The COMM IOP-DUP is an intelligent direct memory access (OMA) controller for synchronous communications
lines. The COMM IOP-DUP software consists of a KMC11-A microprogram and a microprogram loader. The loader runs as a
privileged task under the RSX-11 M operating system.
Under the direction of a user-written driver executing in the PDP-11 processor, the KMC11 microprogram can control multiple
DUP11 synchronous communication lines connected to the PDP-11 UNIBUS. When the system starts up, the COMM IOP-DUP
loader transfers the microprogram to the KMC11. It is then the driver's responsibility to initialize the microprogram and identify
the line addresses, line characteristics, and the 1/0 buffers that the microprogram is to use.
The driver is responsible for half-duplex and multidrop line control, as well as header formatting and message sequencing,
acknowledgement, and retransmission.
MINIMUM HARDWARE REQUIRED: A valid RSX-11 M operating system configuration is required for executing the COMM IOPDUP microprogram loader.

Option
Number

Distribution
Medium

Support
Category

QJ734-CD
QJ734-CE
QJ734-CT
QJ734-CY

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)
Floppy (RX01)

-95-

c
c
c
c

SOFTWARE
RSX-11 M

(QJS&O) RJE/HASP
DESCRIPTION: RJE/HASP operates as a privileged non-check pointable task performing standard IBM HASP Remote Job
Entry Work-station functions under the RSX-11M, RSX-11D, and IAS operating systems. RJE/HASP functions are executed
concurrently with all other RSX-11 /IAS operations.
Communications line control is performed directly by the RJE/HASP task. Concurrent use of the communications device by
other RSX-11 /IAS tasks is precluded. Any device accessible through the standard file control system or through input/output
requests can be used as a source or destination for a file on an input or output data stream. The RJE/HASP task controls these
devices through the use of file system calls and input/output requests. A common area is used for passing data to and from the
disk. Any non-file structured device (i.e., card reader, punch, line printer) is attached by the RJE/HASP task during its use.
PREREQUISITE SOFTWARE: One of the following operating systems: RSX-11M, Version 2 or later, RSX-110, Version 68 or
later, IAS, Version 1.1 or later.
Option
Number

Distribution
Medium

QJS60-XC
QJS60-XD
QJS60-XE
QJS60-XT
QJS60-XY

DECtape
Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)
Floppy Disk (RX01)

Support
Category
A
A
A
A
A

(QJ633) KMC11 TOOLS
DESCRIPTION: KMC11 TOOLS enables a programmer to assemble, load, and debug microprograms for the KMC11-A auxiliary processor. The KMC11 TOOLS software operates under the RSX-11M, RSX-11D and IAS operating systems.
MINIMUM HARDWARE REQUIRED: Any valid RSX-11M, RSX-11D, or IAS operating system configuration that includes a
KMC11-A. A console switch register is required, so the KY11-LB programmers' console is required with the 11 /04 or 11 /34 CPU.
PREREQUISITE SOFTWARE: RSX-11M Version 3.0 or later, RSX-11D Version 6.2 or later, IAS Version 1.1 or later.
Option
Number

Distribution
Medium

QJ633-YD
QJ633-YE
QJ633-YM
QJ633-YY

Magtape (BOO bpi 9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
Floppy (RX01)

Support
Category

-96-

c
c
c
c

RSX-11 M-PLUS SYSTEM SOFTWARE

(QR501) RSX-11M-PLUS OPERATING SYSTEM
DESCRIPTION: RSX-11 M-PLUS is a disk-based, priority-structured, event-driven operating system. It is an extension to the
RSX-11M operating system specially designed to maximize performance on PDP-11/44 and PDP-11170 processors. Memory
sizes from 256K bytes up to 3840K bytes are supported. Memory is logically divided into partitions in which tasks are loaded and
executed. The system controls the placement of tasks within a partition and automatic memory compaction minimizes memory
fragmentation within a partition. Real-time interrupt response is provided by the system's task scheduling m"echanism, which
recognizes 250 software priority levels. The user-specified task priority determines the task's eligibility to execute. A task may be
fixed in a partition to ensure immediate execution when activated, or it can reside on disk while it is dormant, making memory
available to other tasks. Task checkpointing enables tasks to be displaced from memory to enable higher priority, non-resident
tasks to execute. RSX-11 M-PLUS offers complete program development facilities as well as a real-time response run-time
system. Program development, real-time tasks, and batch streams can execute concurrently. The system's software priority
levels enable the user to compile/assemble, debug, install and execute tasks, and run batch streams without significantly
affecting real-time response. A multi-user program development facility is provided. Both the traditional MCR command interface and the easy-to-use Digital Command Language (DCL) are supported. LOGIN/LOGOUT with passwords, device access
protection, a round-robin scheduler (running under the real-time executive), and concurrent execution of equal priority tasks via
executive level swapping provide a timesharing environment. In addition, accounting information is logged to a disk file,
recording per user connect time, CPU time, and pages printed.
Support
Category

System Disk Type

Option
Number

Distribution
Medium

QR501-AD
QR501-AM

Magtape (800 bpi 9-tr)
Magtape (1600 bpi 9-tr)

A
A

RM03
RM03

QR502-AD
QR502-AM

Magtape (800 bpi 9-tr)
Magtape (1600 bpi 9-tr)

A
A

RP04/05/06
RP04/05/06

UPGRADE OPTIONS
QR511-AD

Magtape (800 bpi 9-tr)

RM03

QR512-AD
QR500-DZ
QR520-FR

Magtape (800 bpi 9-tr)
A
RP04/05/06
Single-use license only. (Available only after the purchase of at least one supported license.)
Utilities listings on Microfiche.

Additional Software for RSX-11 M-PLUS Systems

Option
Number

Distribution
Medium

QP301-AD
QP301-AE
QP301-AM
QP301-AQ
QP301-AT
QP301-AV

Magtape (9-tr)
DECpack (RKOS)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

-97-

A
A
A
A
A
A

SOFTWARE
RSX-11 M-PLUS
(QP240) BASIC-11/IAS-RSX
DESCRIPTION: BASIC 11 /IAS-RSX Is an incremental, interactive, interpretive compiler. Its features include strings, chaining,
overlay support, virtual memory (direct access) files, real-time support and a "CALL" statement for assembly language routine
interfacing.

Option
Number

Distribution
Medium

QP240-AD
QP240-AE
QP240-AM
QP240-AQ
QP240-AT
QP240-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category
B
B

B
B
B
B

(QP230) FORTRAN IV
DESCRIPTION: FORTRAN IV is a superset of the ANSI FORTRAN IV language. Some of its features are: fast compile time,
optimized output for fast execution, very efficient code generation, and direct access 1/0. Also: in-line code generation, memorysupported multiple virtual arrays, additional compiler optimization algorithms, and FORTRAN-IV-PLUS language extensions.

Option
Number

Distribution
Medium

Support
Category

QP230-AD
QP230-AE
QP230-AM
QP230-AQ
QP230-AT
QP230-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DEC pack (RL01)
DECpack (RK06)
DECpack (RK07)

B
B
B
B
B
B

(QP100) FORTRAN IV-PLUS
DESCRIPTION: The FORTRAN IV-PLUS compiler produces direct PDP-11 machine code optimized for execution time efficiency on a PDP-11 with floating point processor. It is a superset of ANSI standard FORTRAN and features a virtual memory
compilation technique that allows large FORTRAN programs to be compiled in a relatively small user partition.
This language can be supported by any RSX-11 M-PLUS system running on a hardware configuration with a floating point unit or
a parallel floating point processor.

Option
Number

Distribution
Medium

QP100-AD
QP100-AE
QP100-AM
QP100-AQ
QP100-AT
QP100-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category
A
A

A
A
A
A

(QP012) PDP-11 COBOL
DESCRIPTION: PDP-11 COBOL-11 is a precise, well-defined language processor for business data processing. It is a mature
compiler that conforms to the 1974 ANSI specification.

Option
Number

Distribution
Medium

QP012-AD
QP012-AE
QP012-AM
QP012-AQ
QP012-AT
QP012-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
pECpack (RK06)
pEcpack (RK07)

Support
Category

-98-

A
A
A
A
A

(QP602) SORT-11
DESCRIPTION: SORT-11 is an independent utility that can be run under the control of the RSX-11 M operating system. SORT
provides four different efficient sorting procedures which are selectable by user commands. Any RMS file can be used as an
input file and may be processed with a maximum of 1Osort keys.
To run SORT-11, the user must have RMS-11 or RMS-11 K installed in RSX-11 M-PLUS.
Support
Category

Option
Number

Distribution
Medium

QP602-AD
QP602-AE
QP602-AM
QP602-AQ
QP602-AT
QP602-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

A
A
A
A
A
A

(QR58~DECne~11M-PLUS

DESCRIPTION: DECnet-11 M-PLUS, allows a suitably configured RSX-11 M-PLUS system to participate as a Phase Ill DECnet
node in point-to-point computer networks. DECnet-11 M-PLUS offers task-to-task communications, network file transfer, and
network resource-sharing capabilities, using the DIGITAL Network Architecture (DNA) protocols. Adaptive routing provides the
ability to transfer information efficiently between non-adjacent nodes. Access to DECnet-11 M-PLUS is supported for RSX-11 MPLUS user programs written in MACR0-11 and FORTRAN.
Support
Category

Option
Number

Distribution
Medium

QR580-AD
QR580-AM

Magtape (800 bpi 9-tr)
Magtape (1600 bpi 9-tr)

A
A

Distribution
Medium

QJ918-AD
QJ918-AE
QJ918-AM
QJ918-AQ
QJ918-AT
QJ918-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category

-99-

A
A
A
A
A
A

SOFTWARE
RSX-115
(QJ642) RSX-11S OPERATING SYSTEM
DESCRIPTION: RSX-11 S is a memory based real-time operating system designed to operate in all PDP-11 processors. The
system is not dependent upon any mass storage media for execution. It is a subset of the RSX-11 M disk based operating system
and is fully compatible with it. The 110 driver interface is identical so that any device driver written for one system executes on the
other. Any application program that executes under RSX-11S will execute under RSX-11 M without change following a relink of
the object program.
FEATURES: As a memory based system, RSX-11S provides a run time environmemt for execution of tasks on a memory based
processor. RSX-11S supports all of the peripheral devices that are supported under RSX-11M including such hardware as
floating point processors, parity memory, and memory management. The software components contained in the RSX-11S
distribution kit include the Monitor Console Routine (RSX-11M Subset), on-line task loader, System Image Preservation Program, and File Control Services (FCS) for record devices directory support is not included. Transportability of tasks between the
RSX-11 M host and the RSX-11 S target is provided via the File Exchange Utility (FLX) on the host system and the On-Line Task
Loader (OTL) on the target system.
Option
Number

Distribution
Medium

QJ642-AD
QJ642-AE
QJ642-AG
QJ642-AM
QJ642-AQ
QJ642-AT
QJ642-AV
QJ642-AY

Magtape (9-tr)
DECpack (RK05)
DECtape II (TU58)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)
Floppy Disk (RX01)

Support
Category

A
A
A
A
A
A
A
A

Additional Software for RSX-11 S Systems

(QJ691) DECnet-11S
DESCRIPTION: DECnet-11S extends the capabilities of the RSX-11S operating system by enabling RSX-11S systems the be
interconnected with other DECnet systems. DECnet-11 S can be used as a component of distributed networks, resource sharing
networks, and communications networks.
FEATURES: The DECnet-11S implementation of Digital Network Architecture (DNA) allows tasks written in FORTRAN and
MACRO languages to exchange data with other tasks executing in the DECnet environmemt and execute programs in other
systems in the network. With DECnet-11S, a local operator can send messages through the network to operators at remote
terminals in the network and can request that a description of current network status, including connected nodes and their state,
be printed at a local terminal. DECnet-11 S also allows for down-line loading as well as sequential file access.
The features of Digital Network Architecture (DNA) which are implemented in DECnet-11 S include: support of the DIGITAL Data
Communications Message Protocol (DDCMP) for full and half duplex transmission in point-to-point mode, using parallel, serial
asynchronous, and serial synchronous facilities; support of the Network Services Protocol (NSP) for point-to-point and multipoint network connections; and support of the Data Access Protocol (OAP) for file transfers and sequential record-level access to
files and peripheral devices attached to other systems in the network. Adaptive routing provides the ability to transfer information
efficiently between non-adjacent nodes.
Option
Number

Distribution
Medium

QJ691-AD
QJ691-AE
QJ691-AM
QJ691-AQ
QJ691-AT
QJ691-AV

Magtape (800 bpi 9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DEC pack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category

-100-

A
A
A
A
A
A

RSTS/E SYSTEM SOFTWARE
(QR430) RSTS/E OPERATING SYSTEM
DESCRIPTION: RSTS/E (Resource Sharing Timesharing System/Extended) is a multiprogramming timesharing operating system that allows multiple users to process data simultaneously in either interactive or batch mode using any of several language
processors. It dynamically allocates processor time, file space, and peripherals on a best fit/best throughput basis.
BASIC-PLUS, RSTS/E's implementation of the interactive BASIC language, and MACR0-11 assembly language are standard
with all RSTS/E systems. RMS (Record Management Services) software is also included with RSTS/E systems and supports the
relative, sequential, and single and multi-keyed indexed file organizations. RSTS/E also includes the SORT-11 file sort utility.
Optional software includes the APL-11, PDP-11 COBOL, PDP-11 BASIC-PLUS-2, FORTRAN IV, FORTRAN IV-PLUS programming languages, DATATRIEVE-11 and DECnet/E utilities, and the RSTS/E-2780 protocol emulator.

Option
Number

Distribution
Medium

QR430-AD
QR430-AE
QR430-AM
QR430-AQ
QR430-AT
QR430-AV

Magtape (800 bpi 9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DEC pack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category
A
A
A
A
A
A

Additional Software for RSTS/E Systems
(QP300) DATATRIEVE-11/RSTS/E
DESCRIPTION: DATATRIEVE-11 is an interactive query, report, and data maintenance system designed for unsophisticated
computer users. The DATATRIEVE-11 package includes the RMS-11K software and utilizes the RMS-11K record management
services to access data contained in files of sequential, indexed, or relative organization. It also provides facilities for selective
data retrieval, sorting, formatting, updating, and report generation without programming overhead.

Option
Number

Distribution
Medium

QP300-AD
QP300-AE
QP300-AQ
QP300-AT
QP300-AV

Magtape (9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)

Support
Category
A

A
A

(QP310) DATATRIEVE-11 /RSTS/E UPGRADE
DESCRIPTION:This option is available as an upgrade kit for RSTS/E users who already have RMS-11 K.

Option
Number

Distribution
Medium

QP310-AD
QP310-AE
QP310-AQ
QP310-AT
QP310-AV

Magtape (9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)

Support
Category
A
A
A

A
A

(QJ916) PDP-11 BASIC-PLUS-2
DESCRIPTION: BASIC-PLUS-2 is an outgrowth of the Dartmouth BASIC language. In addition to the elementary BASIC statements, BASIC-PLUS-2 features a number of powerful enhancements which allows the user to create programs which are more
complex and more efficient than those written with BASIC.

Option
Number

Distribution
Medium

QJ916-AD
QJ916-AE
QJ916-AM
QJ916-AQ
QJ916-AT
QJ916-AV

Magtape (800 bpi 9-tr)
Disk Cartridge (RK05)
Magtape (1600 bpi 9-tr)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)
-101-

Support
Category
A
A
A
A
A
A

SOFTWARE
RSTS/E
(QP011) PDP-11 COBOL
DESCRIPTION: PDP-11 COBOL is a precise, well-defined language processor for business data processing. It is a mature
compiler that conforms to the 1974 ANSI specification.

Option
Number

Distribution
Medium

QP011-AD
QP011-AE
QP011-AQ
QP011-AT
QP011-AV

Magtape (9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)

Support
Category
A
A
A
A
A

(QJ906) APL-11
DESCRIPTION: APL (A Programming Language) is a mathematically-structured programming language used in science,
engineering, education, and business. Using APL-11, variables can be examined and changed; statements can b~ altered
without recompilation; and program action can be readily traced. Features of APL-11 include: dynamically variable user's
workspace size; chaining of APL programs to previously prepared run-time programs; multiple statement lines; standard PDP11 file naming formats; and extended single operators which allow the user to fully evaluate character strings and write userdefined functions to perform output formatting and function editing.

Option
Number

Distribution
Medium

QJ906-CD
QJ906-CE
QJ906-CQ
QJ906-CT
QJ906-CV

Magtape (9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)

Support
Category

c
c

c
c
c

(QR435) FORTRAN IV/RSTS/E
DESCRIPTION: FORTRAN IV/RSTS/E is an extended FORTRAN implementation based on the 1966 ANSI standard. It is a fast
one pass optimizing compiler with features that include: common subexpression elimination; "peephole" local code tailoring;
away vectoring; and in-line code generation for integer and logical operations.

Option
Number

Distribution
Medium

QR435-AD
QR435-AE
QR435-AQ
QR435-AT
QR435-AV

Magtape (9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)

Support
Category

B
B
B
B
B

(QPD10) RSTS/E-2780
DESCRIPTION: RSTS/E-2780 Emulator runs as a user job under a suitably equipped RSTS/E or CTS-500 system, providing
emulation of an IBM 2780 Remote Batch Terminal. RSTS/E-2780 will support transmission and reception from/to car.d reader
and line printer, and/or mass storage devices. RSTS/E-2780 transmits files stored on any medium supported by the host
operating system. It stores files on any output medium supported by RSTS/E except DECtape.

Option
Number

Distribution
Medium

QPD10-AD
QPD10-AE
QPD10-AQ
QPD10-AT
QPD10-AV
QPD10-AY

Magtape (9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)
Floppy Disk (RX01)

Support
Category

-102-

A
A
A
A
A
A

(QP690) DECnet/E
DESCRIPTION: DECnet/E allows a suitably configured RSTS/E system to participate as a Phase II DECnet node in point-to-point
computer networks. DECnet/E offers task-to-task communications and network file transfer capabilities using the DIGITAL
Network Architecture Protocols. DECnet/E communicates with adjacent nodes over synchronous communnication lines interfaced only with DMC11 microprogrammed controllers.
Support
Category

Option
Number

Distribution
Medium

QP690-AD
QP690-AE
QP690-AQ
QP690-AT
QP690-AV

Magtape (9-tr)
Disk Cartridge (RK05)
Disk Cartridge (RL01)
Disk Cartridge (RK06)
Disk Cartridge (RK07)

-103-

A
A
A
A
A

SOFTWARE
IAS
IAS SYSTEM SOFTWARE
(QR330) IAS OPERATING SYSTEM
DESCRIPTION: IAS is a complete, general-purpose operating system for the PDP-11 /34 thru PDP-11 /70 computers. IAS
provides a multi-function processing environment which enables real-time applications to execute concurrently with timeshared
multi-user interactive and batch processing applications.
FEATURES: The major components of the IAS operating system are the multiprogramming executive with real-time and timesharing scheduling, the Files-11 comprehensive file system, interactive application program development, extensive system
management facilities, and dynamic memory allocation.
The recommended CPU and amount of memory required is dependent on the operating mode selected (See SPD.)
As options, the system can support FORTRAN IV, FORTRAN IV-PLUS, BASIC, BASIC-PLUS-2, CORAL, and COBOL language
processors, 2780, MUX200, and UN1004 RJE.

Option
Number

Distribution
Medium

QR330-AD
QR330-AE
QR330-AT
QR330-AQ

Magtape (9-tr)
DECpack (RKOS)
DECpack (RK06)
DEC pack (RL01)

Support
Category
A
A
A

Additional Software for IAS Systems

(QP230) FORTRAN IV
DESCRIPTION: FORTRAN IV is an extended superset of the ANSI FORTRAN IV language. Its features include: fast compile
time, optimized output for fast execution, very efficient code generation, and direct access 1/0. Other features include in-line
code generation, memory-supported multiple virtual arrays, additional compiler optimization algorithms, and FORTRAN-IVPLUS language extensions.

Option
Number

Distribution
Medium

QP230-AD
QP230-AE
QP230-AM
QP230-AQ
QP230-AT
QP230-AV

Magtape (9-tr)
DECpack (RKOS)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category
B

B
B
B

B
B

Option
Number

Distribution
Medium

QP100-AD
QP100-AE
QP100-AM
QP100-AQ
QP100-AT
QP100-AV

Magtape (9-tr)
DECpack (RKOS)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

Support
Category

-104-

A
A
A
A
A
A

(QP240) BASIC-11 /I AS-RSX
DESCRIPTION: BASIC 11 is a timeshared BASIC implemented as an incremental compiler. Features include strings, chaining,
overlay support, virtual memory (direct access) files, real-time support and a "CALL" statement for assembly language routine
interfacing.
This language can be supported by any IAS system with an additional 30K byte partition.

Option
Number

Distribution
Medium

Support
Category

QP240-AD
QP240-AE
QP240-AM
QP240-AQ
QP240-AT
QP240-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

B
B
B
B
B
B

(QJ919) PDP-11 BASIC-PLUS-2
DESCRIPTION: BASIC-PLUS-2 is a superset of the RSTS/E BASIC-PLUS, BASIC-11 /I AS-RSX, and Dartmouth BASIC languages. It includes CALL statements, COM or COMMON statements, record 1/0, and interactive debugging.
This language can be supported by any valid IAS configuration with at least 48K bytes of memory in addition to the minimum
required by the operating system.

Option
Number

Distribution
Medium

QJ919-AD
QJ919-AE
QJ919-AT

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)

Support
Category
A
A
A

(QP013) PDP-11 COBOL
DESCRIPTION: PDP-11 COBOL-11 is a precise, well-defined language processor for business data processing. It is a mature
compiler that conforms to the 1974 ANSI specification.
This language can be supported by any IAS system that includes an LP11 series line printer and which is capable of supporting a
minimum COBOL partition of 56K bytes. Also at least 3,000 free blocks of on line disk storage on the public disk structure.

Option
Number

Distribution
Medium

Support
Category

QP013-AD
QP013-AE
QP013-AT

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)

A
A

(QP066) CORAL 66
DESCRIPTION: CORAL 66 is a high-level block-structured programming language. It is the standard general purpose language prescribed by the British Government for real-time and process control applications. This language is designed to replace
assembly level programming in modern industrial and commercial applications. It is used for long-life products where ease of
maintenance and flexibility are required.
The PDP-11 CORAL 66 compiler operates under the IAS operating system and provides: BYTE, LONG (32 bit integer) and
DOUBLE (64 bit floating point) numeric types; re-entrant code at the procedure level; executable generated code; switchable
option to select target PDP-11 computer instruction sets, optimize generated code, and check the bounds of array-type
variables; and conditional compilation of defined parts of source code.
CORAL 66 can be supported by any valid IAS operating system configuration which includes: KT11 Memory Management or
equivalent; KE11-E Extended Instruction Set or equivalent; a 9-track magnetic tape system, an RK11 disk cartridge system, or an
RK611 disk cartridge system; a 48K byte main memory partition; and FP11 Floating Point Processor.

Option
Number

Distribution
Medium

Support
Category

QP066-AD
QP066-AE
QP066-AM
QP066-AQ
QP066-AT
QP066-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RL01)
DECpack (RK06)
DECpack (RK07)

-105-

A
A
A
A
A
A

SOFTWARE
IAS

(QJ747) FORTRAN Graphics Package
DESCRIPTION: The FORTRAN Graphics Package is a collection of FORTRAN-callable routines for users of FORTRAN on RT11, RSX-11 M, or IAS operating systems who wish to use the graphics capabilities of the VT55 terminal and the VT11 or VS60
display processors. The package includes two sets of routines: a PLOT55 routine for the VT55 graphics terminal, and DECgraphic-11 routines for the VT11 and VS60 display processors.
The FORTRAN Graphics Package can be supported by any valid RSX-11M operating system configuration supporting either
FORTRAN IV/IAS-RSX or FORTRAN IV-PLUS and which includes 32K bytes of memory.
The user must have RSX-11 M, and either FORTRAN IV /IAS-RSX or FORTRAN IV-PLUS.

Option
Number

Distribution
Medium

QJ747-XD
QJ747-XE
QJ747-XQ
QJ747-XT

Magtape (9-tr)
DECpack (RK05)
DECpack (RL01)
DECpack (RK06)

Support
Category
B
B
B
B

(QP902) RMS-11 K
DESCRIPTION: RMS-11K provides keyed access record management services for IAS. RMS-11K is comprised of a set of runtime service routines and utility programs that enable keyed access data files to be defined, populated and maintained on direct
access storage devices. The RMS-11 K run-time service routines provide an interface between PDP-11 multi-programmed
operating system and user developed applications programs.
RMS-11 K can be supported by any IAS system with memory management that meets the minimum memory requirements for the
operating system and optional language processors (BASIC-PLUS-2, COBOL, or MACR0-11 ), plus an additional BK bytes
(overlaid) or 24K bytes (not overlaid).

Option
Number

Distribution
Medium

QP902-AD
QP902-AE
QP902-AT

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)

Support
Category
A
A

(QP302) DATATRIEVE-11/IAS
DESCRIPTION: DATATRIEVE-11 is an interactive query, report, and data maintenance system designed for unsophisticated
computer users. The DATATRIEVE-11 package includes RMS-11K software. DATATRIEVE-11 utilizes the RMS-11K record
management services to access data contained in files of sequential, indexed, or relative organization. It also provides facilities
for selective data retrieval, sorting, formatting, updating, and report generation without the need for programming overhead.

Option
Number

Distribution
Medium

QP302-AD
QP302-AE
QP302-AT

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)

Support
Category
A
A
A

(QP375) DBMS-11
DESCRIPTION: DBMS-11 is an implementation of the CODASYL Specified Data Base facility. It is designed to provide data
base management facilities for PDP-11 COBOL programs and any other host language which supports a CALL statement such
as FORTRAN IV, FORTRAN IV-PLUS, IAS-RSX and BASIC-11 /IAS-RSX, and MACR0-11. DBMS-11 provides separate language
facilities for the description of data and the manipulation of data. This separation of data description provides for the integration
of all data and data relations into a data base which is common to all applications programs sharing the data.
DBMS-11 can be supported by any IAS system with at least 256K bytes of memory, line printer, magnetic tape subsystem, and
sufficient mass storage for the user data base.

Option
Number

Distribution
Medium

Support
Category

QP375-AO

Magtape (9-tr)

-106-

(QP602) SORT-11
DESCRIPTION: SORT-11 is an independent utility that can be run under the control of the IAS operating system. SORT
provides four different efficient sorting procedures, which are selectable by user commands. Any RMS file can be taken as input
and will be produced as a reordered output file. Files stored in RMS-11 format may be processed with up to 1Osort keys.
Option
Number

Distribution
Medium

Support
category

QP602-AD
QP602-AE
QP602-AM
QP602-AQ
QP602-AT
QP602-AV

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack {RL01)
DECpack (RK06)
DECpack (RK07)

A
A
A
A
A
A

(QR680) DECnet-IAS
DESCRIPTION: DECnet-IAS, allows a suitably configured IAS system to participate as a Phase II DECnet node in point-to-point
computer networks. DECnet-IAS offers task-to-task communications, network file transfer and network resource-sharing capabilities, using the DIGITAL Network Architecture (DNA) protocols. DECnet-IAS communicates with adjacent nodes over synchronous communication lines interfaced with microprogrammed controllers. Access to DECnet-IAS is supported for IAS user
programs written in MACR0-11 and FORTRAN. This option includes single-use license, binaries, documentation, and full
support.
Option
Number

Distribution
Medium

QR680-AD
QR680-AE
QP680-AQ
QR680-AT

Magtape (9-tr)
Disk cartridge (RK05)
DECpack (RL01)
Disk Cartridge (RK06)

Support
Category

A
A
A
A

(QJ170) UN1004/IAS
DESCRIPTION: The UN1004/IAS product is a PDP-11 based software communication emulator to a UNIVAC 1100 Series
Computer System. The software operates under the IAS operating system and provides remote batch terminal or remote batch
entry terminal emulation capability using the UNIVAC 1004 communications protocol (RMS - 1) and the XS-3 code. This
product provides support for: one synchronous line to a UNIVAC 1100 Series Computer System; line communication over
switched or unswitched common carrier line interfaces; up to 4800 baud on the synchronous line interface; and one (1) on-line
full duplex terminal over a single two wire or four wire synchronous line.
UN1004/IAS can be supported by any valid IAS configuration with: 16K byte Real-Time partition plus 6K byte usuage of
timesharing partition; and a DU11 synchronous line interface.
Option
Number

Distribution
Medium

QJ170-AD
QJ170-AE
QJ170-AM
QJ170-AT

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RK06)

Support
category

-107-

A
A
A
A

SOFTWARE
IAS

(QJ070) MUX200/IAS
DESCRIPTION: MUX200/IAS is a PDP-11 based software package which provides communication with a host Control Data
Corporation (CDC) 6000 or CYBER series computer system. MUX200/IAS communications to/from the host computer system
and includes the following features: enables output recieved from the host to be spooled to a line printer; allows up to 8 datasets
to transmit to the host at a single command; reduces host and/or line costs by utilizing local processing power; replaces terminal
with user-written tasks; and allows terminals to be detached while the software package is operating.
MUX200/IAS can be supported by any valid IAS operating system which includes: at least 32K bytes of memory for a singleterminal configuration; and at least 4K bytes of memory for each additional terminal. A DU11-D synchronous line interface and
appropriate modem is also required.

Option
Number

Distribution
Medium

QJ070-AD
QJ070-AE
QJ070-AM
QJ070-AT

Magtape (9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
DECpack (RK06)

Support
Category
A
A
A
A

(QJ733) COMM IOP-DZ for IAS
DESCRIPTION: The COMM IOP-DZ is an intelligent direct memory access (OMA) controller for asynchronous terminal communications lines. The COMM IOP-DZ performs OMA message assembly on reception and disassembly on transmission. The
COMM IOP-DZ relieves the PDP-11 central processor of many of the tasks associated with handling asynchronous terminal lines.
The COMM IOP-DZ software consists of a KMC11-A microprogram and a microprogram loader. The loader runs as a privileged
task under the IAS operating system.
In addition to the buffer descriptor lists, COMM IOP-DZ also uses 128-byte Functional Mode Control Tables defined by the driver
in main memory space. These tables enable the driver to control how the COMM IOP-DZ processes any given input character. As
many as eight Functional Mode Control Tables can be assigned to a given line, enabling the COMM IOP-DZ to recognize and
process multiple-character sequences. Tables can be shared by multiple lines.
MINIMUM HARDWARE REQUIRED: Any PDP-11 UNIBUS processor with: sufficient available main memory for the user-written
driver and buffers during system operation, and for the COMM IOP-DZ microprogram loader at system startup, a KMC11-A
auxiliary processor, a DZ11 asynchronous line multiplexer.A valid IAS operating system configuration is required for executing
the COMM IOP-DZ microprogram loader.

Option
Number

Distribution
Medium

QJ733-CD
QJ733-CE
QJ733-CT
QJ733-AY

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)
Floppy (RX01)

Support
Category

c
c
c

(QJ734) COMM IOP-DUP for IAS
DESCRIPTION: The COMM IOP-DUP is an intelligent direct memory access (OMA) controller for synchronous communications
lines. The COMM IOP-DUP software consists of a KMC11-A microprogram and a microprogram loader. The loader runs as a
privileged task under the IAS operating system.
Under the direction of a user-written driver executing in the PDP-11 processor, the KMC11 microprogram can control multiple
DUP11 synchronous communication lines connected to the PDP-11 UNIBUS. When the system starts up, the COMM IOP-DUP
loader transfers the microprogram to the KMC11. It is then the driver's responsibility to initialize the microprogram and identify
the line addresses, line characteristics, and the 1/0 buffers that the microprogram is to use.
The driver is responsible for half-duplex and multidrop line control, as well as header formatting and message sequencing,
acknowledgement, and retransmission.
MINIMUM HARDWARE REQUIRED: A valid IAS operating system configuration is required for executing the COMM IOP-DUP
microprogram loader.

Option
Number

Distribution
Medium

QJ734-CD
QJ734-CE
QJ734-CT
QJ734-AY

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)
Floppy (RX01)

Support
Category

-108-

c
c

(QJS60) RJE/HASP
DESCRIPTION: RJE/HASP operates as a privileged non-check pointable task performing standard IBM HASP Remote Job
Entry Work-station functions under the RSX-11 M, RSX-110, and IAS operating systems. RJE/HASP functions are executed
concurrently with all other RSX-11 /IAS operations.
Communications line control Is performed directly by the RJE/HASP task. Concurrent use of the communications device by
other RSX-11 /IAS tasks is precluded. Any device accessible through the standard file control system or through input/output
requests can be used as a source or destination for a file on an Input or output data stream. The RJE/HASP task controls these
devices through the use of file system calls and input/output requests. A common area is used for passing data to and from the
disk. Any non-file structured device (i.e., card reader, punch, line printer) is attached by the RJE/HASP task during its use.
PREREQUISITE SOFTWARE: One of the following operating systems: RSX-11M, Version 2 or later, RSX-110, Version 6B or
later, IAS, Version 1.1 or later.

Option
Number
QJS60-XD
QJS60-XE
QJS60-XT

Distribution
Medium
Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)

Support
Category
A
A
A

(QJ633) KMC11 TOOLS
DESCRIPTION: KMC11 TOOLS enables a programmer to assemble, load, and debug microprograms for the KMC11-A auxiliary processor. The KMC11 TOOLS software operates under the RSX-11 M, RSX-11 D and IAS operating systems.
MINIMUM HARDWARE REQUIRED: Any valid RSX-11M, RSX-11D, or IAS operating system configuration that includes a
KMC11-A. A console switch register is required, so the KY11-LB programmers' console is required with the 11/04 or 11/34 CPU.
PREREQUISITE SOFTWARE: RSX-11M Version 3.0 or later, RSX-110 Version 6.2 or later, IAS Version 1.1 or later.

Option
Number

Distribution
Medium

Support
Category

QJ633-YD
QJ633-YE
QJ633-YM
QJ633-YY

Magtape (800 bpi 9-tr)
DECpack (RK05)
Magtape (1600 bpi 9-tr)
Floppy (RX01)

C
C
C
C

(QPD71) IAS/3271, Protocol Emulator (PE)
DESCRIPTION: The IAS/3271 Protocol Emulator (PE) permits applications tasks running under IAS to communicate interactively with tasks in an IBM 360 or 370 system. It is a tool to aid in implementing complex applications requiring on-line information
entry and retrieval, file transfer and inter-task communications capabilities between IBM 360 or 370 and PDP-11 IAS systems.
The user task in IAS presents itself to the IBM system as an IBM 3277 display unit attached to an IBM 3271 control unit operating
in slave mode.
The emulator operates as a device driver under IAS, maintaining the synchronous line discipline on one side and interfacing with
the user tasks on the other. The PE module supports up to six synchronous lines, each of which can be viewed by the 360 or 370
as a 3271 controller. The theoretical maximum number of IAS user tasks that can be supported by each pseudo controller is 32.
The maximum number of supported lines and user tasks is a function of application requirements and buffer constraints.
PREREQUISITE SOFTWARE: IAS Operating System, Version 1.1 or later.

Option
Number

Distribution
Medium

QPD71-AD
QPD71-AE
QPD71-AT

Magtape (9-tr)
DECpack (RK05)
DECpack (RK06)

Support
Category
A
A

(QRD03) IAS/2780
DESCRIPTION: The IAS/2780 runs as a privileged task under a suitably equipped IAS system (Version 2 or later), providing
emulation of an IBM 2780 remote batch terminal. It will support transmission to and reception from mass storage devices such as
disk and magnetic tape, transmission to line printer, and reception from card reader.
PREREQUISITE SOFTWARE: IAS Version 2.0 or later.

Option
Number

Distribution
Medium

Support
Category

QRD03-AD
QRD03-AE
QR003-AT

Magtape (800 bpi 9-tr)
DECpack (RK05)
DECpack (RKOS)

-109-

A
A

SOFTWARE
VAX/VMS

VAX-111780 SYSTEM SOFTWARE

(QE001) VAXNMS OPERATING SYSTEM
DESCRIPTION: VAX/VMS is the general-purpose operating system for the VAX-11 /780 series of systems. It provides a reliable,
high-performance environment for the concurrent execution of multi-user timesharing, batch, and real-time applications written
in BASIC, BLISS, COBOL, FORTRAN, PASCAL, CORAL and assembly language.
The system features virtual memory management, event-driven priority scheduling, shared memory, interprocess communication, data protection based on ownership and application groups, user privilege and resource allocation control, and an easy-touse, easily extended command language.
Other system features include multi-job and multi-stream batch processing, tools for developing native and compatibility mode
programs, extensive file and record management services, programmed system services for process and subprocess control
and interprocess communication, Common Run-Time Procedure Library, and system maintenance utilities.
SOFTWARE COMPONENTS: The VAX/VMS product includes the following facilities: Operating system nucleus, including
virtual memory manager, swapper, system services, and input/output device drivers, user authorization control program, job
initiator and symbiont manager, account manager, and Operator Communications Manager.
Other components include error logging and print utility, DCL command interpreter, MCR command interpreter, interactive and
batch editors, macro assembler, linker with cross reference, library maintenance utility, Common Run-Time Procedure Library,
symbolic debugger for native programs, Record Management Services, Files-11, sort utility, and software maintenance release
update utility.

Option
Number

Distribution
Medium

QE001-AM
QE001-AV

Magtape (1600 bpi 9-tr)
DECpack (RK07)

Support
Category
A
A

Additional Software for VAX-11 /780 Systems
(QE100) VAX-11 FORTRAN IV-PLUS
DESCRIPTION: VAX-11 FORTRAN IV-PLUS is an optimizing FORTRAN compiler designed to achieve high execution speed. It
is based on the ANS FORTRAN X3.9-1966 standard. Its generated code takes advantage of the floating point and character
instruction set and the VAX/VMS virtual memory system.
The compiler supports a number of extensions to the ANSI standard, including mixed-mode arithmetic, CHARACTER and BYTE
data types, BLOCK-IF-THEN-ELSE statements, generalized DO loops, ENTRY, OPEN, CLOSE, ENCODE, DECODE, INCLUDE,
PARAMETER, PROGRAM statements, 15 character variable names, upper and lower array bound declarations, alternate RETURNS, and debug statements in the source code. The generated code supports standard calls to the system services, includes
symbols for use by the run-time symbolic debugger, and is shareable.

Support
Category

Option
Number

Distribution
Medium

QE100-AY

Floppy Disk (RX01)

(QE102) PDP-11 BASIC-PLUS-2NAX
DESCRIPTION: PDP-11 BASIC-PLUS-2/VAX is a superset of the RSTS/E BASIC-PLUS, BASIC-11 IAS-RSX, and Dartmouth
BASIC languages. It includes CALL statements, COMMON statements, and RMS record 1/0. Also included is extensive string
support, a full matrix package, support for long variable names, IF, THEN, ELSE constructs, and statement modifiers: IF, WHILE,
UNLESS, FOR. The BASIC-PLUS-2/VAX compiler generates compatibility mode code.
The language is supported by any valid VAX/VMS system.

Support
Category

Option
Number

Distribution
Medium

QE102-AY

Floppy Disk (RX01)

-110-

(QE101) VAX-11 COBOL-74
DESCRIPTION: VAX-11 COBOL-74 is a language processor for business data processing. It is based on the ANS X3.23-1974
standard and is highly compatible with PDP-11 COBOL-74. It produces native mode code and takes advantage of the VAX/VMS
virtual memory syslem, the packed decimal (COMP-3) and character data types.
VAX-11 COBOL-74 includes the following language elements: Level 2 Nucleus module, Level 2 Table Handling module, Level 2
Sequential 1/0 module, Level 2 Relative 1/0 module, Level 2 Indexed 110 module, Level 2 Segmentation module, Level 1 Library
Module, with partial Level 2 REPLACING facility, Level 1 interprogram communication module, Cross refrence compilation
listing, DISPLAY verb WITH NO ADVANCING clause. Conditional variables-Data Division level 88, Nested Conditionals

Option
Number

Distribution
Meclum

Support
Category

QE101-AY

Aoppy Disk (RX01)

(QE106) YAX-11 BLl5S-32

nao.

DESCRIPTION: BLISS-32 is a high level systems implementation language for the V AX-11
BLISS-32 supports development of modular software according to structured programming concepts by providing a rich and advanced set of language
features for the VAX-11n80 to facilitate programming of time-critical and/or hardware-independent applications. BLISS-32 is
especially intended for the development of operating systems, compilers, run-time system components, data base file systems,
communications software, utilities, etc.
The user must have any valid VAX/VMS system, however, at least 512K bytes of memory is recommended.

Option
Number

Distribution
Medium

Support
Category

QE106-AY

Aoppy Disk (RX01}

(QE066) PDP-11 CORAL 66NAX .
DESCRIPTION: PDP-11 CORAL 66/VAX is a high level block-structured programming language. It is the standard, generalpurpose language prescribed by the.British Government for real-time and process control applications.
The POP-11 CORAL 66 Object Time System (OTS) which runs in the compatibility mode under RSX-11 APPLICATION MIGRATION EXECUTIVE is a set of object modules that can be selectively linked with compiler-produced object modules to produce a
task (program) ready for execution.
PREREQUISITE SOFTWARE: VAX/VMS Operating System, Version 1.0

Option
Number

Distribution
Medium

Support
Category

QE066-AY

Floppy (RX01)

(QE070) MUX200NAX
DESCRIPTION: MUX200/VAX is a VAX-11 based software package which provides communication with a CDC 6000, CYBER
series, or other host computer systems capable of using 200 UT mode 4A communications protocol. Any VAX-11 interactive
terminal may be used to control remote job entry or to communicate at command level with the host system. Input files may be
sent from and output files received onto any V AX-11 supported mass storage, unit record, or terminal device.
MUX200NAX enables several users to communicate simultaneously with a host system over a single line. The VAX/VMS system
while using a single physical drop appears to the host as a number of multidrops and terminals on the circuit. The maximum
number of simultaneous users supported by the MUX200/VAX system is 16.
MINIMUM HARDWARE REQUIRED: Any valid VAX/VMS configuration with a DUP11 synchronous communication interface.

Option
Number

Distribution
Medium

Support
Category

QE070-AY

Floppy (RX01)

-111-

SOFTWARE
VAX/VMS

(QE110) VAX-11 PASCAL
DESCRIPTION: VAX-11 PASCAL is an extended implementation of the PASCAL language as defined In the PASCAL User
Manual and Report. It takes full advantage of the VAX-11 hardware floating point and character instruction sets and the virtual
memory capabilities of the VAX/VMS operating system.
VAX-11 PASCAL is a reentrant, native mode compiler particularly suited to instructional use. It is also suitable for systems
programming and research applications.
PASCAL is a structured, high-level programming language that provides a modular systematic approach to computerized
problem solving.
VAX-11 PASCAL has many of the features common to other languages of VAX/VMS including: separate compilation of modules,
standard call interface to routines written in other languages, access to VAX/VMS system services and VAX-11 SORT utility.
PREREQUISITE SOFTWARE:
VAX/VMS operating system, Version 1.6 or later.

Option
Number

Distribution
Medium

Support
Category

QE110-AY

Floppy (RX01)

(QE105) PDP-11 DATATRIEVENAX
DESCRIPTION: DATATRIEVE is an interactive query, report, and data maintenance system designed for unsophisticated
computer users. DATATRIEVE utilizes the RMS record management services to access data contained in files of sequential,
indexed, or relative organization. It also provides facilities for selective data retrieval, sorting, formatting, updating, and report
generation without the need for programming overhead.

Support
Category

Option
Number

Distribution
Medium

QE105-AY

Floppy Disk (RX01)

(QE107) FORTRAN-IVNAX to RSX Cross Compiler
DESCRIPTION: FORTRAN-IV/VAX to RSX is a extended implementation of FORTRAN based on ANS FORTRAN X3.9-1966.
The FORTRAN-IV compiler operates under the VAX/VMS operating system to produce code which executes on a RSX-11 M or
RSX-118 system, or, if properly coded, in the VAX-111780 compatibility mode environment. The FORTRAN-IV/VAX to RSX
language contains a number of extensions to the ANSI standard, including mixed-mode arithmetic, general expressions in DO
loop parameters and subscripts, ENCODE, DECODE, PRINT, TYPE, ACCEPT, DEFINE FILE, and PROGRAM statements, and a
number of FORTRAN IV-PLUS compatible language extensions.

Support
Category

Option
Number

Distribution
Medium

QE107-AY

Floppy Disk (RX01)

(QED01) DECnet-VAX
DESCRIPTION: DECnet-VAX allows a suitably configured VAX/VMS system to participate as a Phase II DECnet node in pointto-point computer networks.
DECnet-VAX offers task-to-task communications, network file transfer, and network resource sharing capabilities using the
DIGITAL Network Architecture (DNA) protocols. DECnet-VAX communicates with adjacent nodes over synchronous communication lines.
DECnet-VAX is avaiable as an enhancement to any valid VAX/VMS system with one of the following communication devices:
DMC11-AR, -DA; DMC11-AL, -MD; or DMC11-AL-MA.

Support
Category

Option
Number

Distribution
Medium

QED01-AY

Floppy Disk (RX01)

-112-

(QE111) VAX-11 2780/3780 Protocol Emulator
DESCRIPTION: This product emulates the synchronous line protocol used by a 2780 or '3780 Remote Batch Terminal. The
emulator provides the VAX/VMS user with a mechanism for transferring files between the VAX/VMS system and another system
equipped to handle 2780 or 3780 communications protocols. The remote system is functionally similar to a sequential unit record
device which is a sink and a source of data.
Several data formats are supported with the use of a particular format selected via user command. Users may select various
forms control translation schemes, records can be padded with spaces to card images before transmission, translation to and
from EBCDIC, and BSC transparency. All file 1/0 is performed through the VAX/VMS record management facility. Print and
punch stream recognition is implemented in such a way that the data manipulation scheme can differ with each stream.
MINIMUM HARDWARE REQUIRED: The VAX-11 2780/3780 Protocol Emulator requires a valid VAX/VMS configuration plus a
DUP-11.
PREREQUISITE SOFTWARE: VAX/VMS, Version 1.5 is required to use this product.

Option
Number
QE111-AY

Distribution
Medium
Floppy Disk (RX01)

Support
Category

(QE707) DX/VMS, WPS-8 to Host Software Utility
DESCRIPTION: DX/VMS is a FORTRAN IV-PLUS software package that executes on a VAX/VMS operating system. It enables
a WPS-8 word processing system running WPS-8, WPS-8/78, or WPS-8/MTS software to communicate with the VAX/VMS host
over an asynchronous terminal interface.
The user must have any valid VAX/VMS system supporting FORTRAN IV-PLUS that has an available local or remote serial
asynchronous terminal line supported by the operating system, and 2) any valid WPS-8 or WPS-8/MTS system configuration
with communication option or one WS78-CA. Each additional WPS-8 system connected to the VAX/VMS system requires its own
line.

Option
Number

Distribution
Medium

Support
Category

QE707-YM

Magtape (9-tr)

(QS051) Pen Plotter Utillty
DESCRIPTION: A library of FORTRAN subroutines to produce graphical output on most of the CALCOMP range of Pen
Plotters. ·included are all the standard CALCOMP calls (LINE, SYMBOL, WHERE, etc.) and a handler for the CALCOMP 906
controller which connects to the VAX-11 /780 via an EIA asynchronous line.
The user must have any valid VAX/VMS system, one line of a DZ11, and from CALCOMP, Model 906 controller PLUS any
supported plotter.

Note: Customer must purchase plotter from CALCOMP and negotiate installation and maintenance directly with them.
Option
Number

Distribution
Medium

Support
Category

QS051-YM
QS051-YY

Magtape(1600bpi9-tr)
Floppy Disk (RX01)

C
C

(QE050) Digitizer Utility
DESCRIPTION: A library of FORTRAN subroutines for acquiring data from the TALOS range of digitizers. Includes such single
calls as fetch AREA, LENGTH, etc. in any scale of units specified by the user, and allows flexible creation of MENU areas on the
Digitizer surface.
Software components include:
"Standard ONE").

Library of Digitizer Subroutines, and handler for TALOS model Digitizers ("Simple ONE" and

This utility is supported by any valid VAX/VMS-system with one line of a DZ11, and any TALOS model Digitizer from their
"Standard ONE" or "Simple ONE" ranges. Must have the RS232-C option installed plus the TALOS/DEC status modification.

Note: Customer must purchase digitizer from TALOS and negotiate installation and maintenance directly with them.
Option
Number

Distribution
Medium

QE050-YY

Floppy Disk (RX01)

Support
Category

-113-

SOFTWARE
VAX/VMS

(QE053) Engineering Drawing Utilities
DESCRIPTION: A library of FORTRAN callable subroutines to provide high level control of Pen Plotters, Electrostatic Plotters
and DECgraphic Display Satellites. Single calls are included to produce complex output with the minimum of applications
programming effort, including routines to create circles, arcs, graph axes with labeling, dimension lines, arrowheads, etc., as well
as a library of over 60 standard mathematical, logic and electronic symbols. Users may define their own symbols within 100 x 100
matrix and reference them with a unique calling number. Also included is a "SNAPSHOT" routine to produce a hard copy output
from a DECgraphic display file.
The user must have any valid VAX/VMS system and any one of the following prerequisites: 1) DECgraphic FORTRAN Package
(QE747), or 2) Pen Plotter Utility (QS051 ), or 3) Electrostatic Utility (QS052).

Option
Number

Distribution
Medium

QE053-YY

Floppy Disk (RX01)

Support
Category

EXTENDED DIAGNOSTICS

(ZE014) VAX-11/780 Diagnostics Extended
DESCRIPTION: For those VAX-111780 customers who have determined that self-maintenance Is cost-effective, DIGIT AL offers
extensions to the standard set normally delivered with VAX/VMS. This expanded set of diagnostics contains CPU microdiagnostics and supervisor scripting, which is the ability to build a sequence of diagnostics that will operate without operator intervention.
The user must have any valid VAX/VMS system with standard diagnostic set.

Option
Number

Distribution
Medium

ZE014-CY

Floppy Disk (RX01)

Support
Category

-114-

HARDWARE SYSTEMS
System Code ...... Page
11 /03-EA(EB) ............ 9
11/03-FA(FB) ............ 9
11/03-LH(LJ) ............ 10
11/03-LK(LL) ............ 10
11 /03-SC(SD) ............ 9
11 /03-SE(SF) ............ 9
11/04-BC(BD) .......... 21
11/04-DC(DD) .......... 21
11 /04-DH(DJ) .......... 22
11 /04-FC(FD) ............ 21
11/04-HC(HD) .......... 21
11/04-HH(HJ) .......... 22
11 /04-JC(JD) ............ 21
11 /04-JH(JJ) ............ 22
11 /04-LC(LD) ............ 21
11/04-LH(LJ) ............ 22
11 /23-AA(AB)
11 /23-AC(AD)

.......... 11
.......... 11

11/44-CA(CB) .......... 30
11 X44-CA(CB) .......... 30
11 /60-CA(CB) .......... 34
11160-EA(EB) ............ 34
11X60-CA(CB) .......... 34
11X60-EA(EB) .......... 34
11 Y60-CA(CB) .......... 34
11Y60-EA(EB) .......... 34
11 /70-AA(AB) .......... 39
11/70-VA(VB) .......... 39
11 /70-VK(VL) ............ 39
11780-CP(CT) .......... 45
1134A-DC(DD) .......... 23
1134A-DE(DF) .......... 24
1134A-DH(DJ) .......... 24
1134A-HC(HD) .......... 24
1134A-HE(HF) .......... 25
1134A-HH(HJ) .......... 25
1134A-JC(JD) .......... 24
1134A-JE(JF) ............ 25
1134A-JH(JJ) ............ 25
1134A-LC(LD) .......... 23
1134A-LE(LF) ............ 24
1134A-LH(LJ) ............ 24

System Code ...... Page

11110-BC(BD) ............ 6
11110-DC(DD) ............ 6

SE-70CVB-CA(CD) ...... 40
SE-70CVB-CK(CN)

11130-BC(BD) ............ 6
11130-CC(CD) ............ 6
11130-DC(DD) ............ 6

SE-70TVB-CA(CD) ...... 40
SE-70TVB-CK(CN)

SM-70CAA-CA(CD) ...... 41
SM-70CAA-CE(CJ) ...... **
SM-70CAA-CK(CN) ...... **

11151-BE(BF) ............ 7
11151-CE(CF) ............ 7
11151-CH(CJ) ............ 7
11152-BE(BF) ............ 7
11152-CE(CF) ............ 7
11152-CH(CJ) ............ 7
11153-BE(BF) ............ 7
11153-CE(CF) ............ 7
11153-CH(CJ) ............ 7
11155-BE(BF) ............ 8
11155-CE(CF) ............ 8
11155-CH(CJ) ............ 8

PACKAGED SYSTEMS
CM-30HHA-LA(LD) ...... 27
CM-30HHA-LE(LJ) ...... ••
CM-30HHA-LK(LN) ...... **
CM-30LLA-LA(LD) ...... 27
CM-30LLA-LE(LJ) ........ **
CM-30LLA-LK(LN) ........ **
CR-30LLA-LA(LD) ...... 26
CR-30LLA-LE(LJ) ........ **
CR-30LLA-LK(LN) ........ **

SM-30HHB-CA(CD) ...... 26
SM-30HHB-CE(CJ) ...... **
SM-30HHB-CK(CN) ...... **
SM-30LLB-AA(AD) ...... 26
SM-30LLB-AE(AJ) ........ **
SM-30LLB-AK(AN) ...... **
SM-30LLB-BA(BD) ...... 26
SM-30LLB-BE(BJ) ........ **
SM-30LLB-BK(BN) ...... **
SM-30LLB-CA(CD) ...... 26
SM-30LLB-CE(CJ) ........ **
SM-30LLB-CK(CN) ...... **
SM-30M MA-AA(AD) ...... 26
SM-30MMA-AK(AN) ...... **
SM-30MMA-BA(BD) ...... 26
SM-30MMA-BK(BN) ...... **
SM-30MMA-CA(CD) .... 26
SM-30MMA-CK(CN) ...... **
SM-30UAA-CA(CD) ...... 27
SM-30UAA-CE(CJ) ...... **
SM-30UAA-CK(CN) ...... **
SM-30UVB-CA(CD) ...... 26
SM-30UVB-CE(CJ) ...... **
SM-30UVB-CK(CN) ...... **
SM-40MMA-CA(CD) .... 31
SM-40MMA-CK(CN) ...... **

CR-30SSA-LA(LD) ...... 26
CR-30SSA-LE(LJ) ........ **
CR-30SSA-LK(LN) ........ **

SM-40HHA-CA(CD) ...... 31
SM-40HHA-CK(CN) ...... **

SA-70CVC-CA(CD) ...... 40
SA-70CVC-CK(CN) ...... **

SM-40UAA-CA(CD) ...... 31
SM-40UAA-CK(CN) ...... **

SA-70TVC-CA(CD) ...... 40
SA-70TVC-CK(CN) ...... **

SM-40MMB-CA(CD) .... 31
SM-40MMB-CK(CN) ...... **

SE-30HHB-CA(CD) ...... 27
SE-30HHB-CK(CN) ...... **

SM-60HHA-CA(CD) ...... 35
SM-60HHA-CE(CJ) ...... **
SM-60HHA-CK(CN) ...... **

SE-30LLB-CA(CD) ...... 27
SE-30LLB-CK(CN) ........ **
SE-30MMA-CA(CD) ...... 27
SE-30MMA-CK(CN) ...... **
SE-30UVB-CA(CD) ...... 27
SE-30UVB-CK(CN) ...... **

1134A-WC(WD) .......... 23
1134A-WE(WF) .......... 24

SE-40MMA-CA(CD) ...... 32
SE-40MMA-CK(CN) ...... **

1134A-XC(XD) .......... 23
1134A-XE(XF) .......... 24

SE-40HHA-CA(CD) ...... 32
SE-40HHA-CK(CN)

1134A-YC(YD) .......... 23
1134A-YE(YF) .......... 24

SE-40UAA-CA(CD) ...... 32
SE-40UAA-CK(CN)

1134A-ZC(ZD) .......... 23
1134A-ZE(ZF) .......... 24

SE-40UAB-CA(CD) ...... 32
SE-40UAB-CK(CN)

SM-60HHB-CA(CD) ...... 36
SM-60HHB-CE(CJ) ...... **
SM-60HHB-CK(CN) ...... **
SM-60LLA-CA(CD) ...... 35
SM-60LLA-CE(CJ) ........ **
SM-60LLA-CK(CN) ...... **
SM-60MMA-CA(CD) ...... **
SM-60MMA-CK(CN) ...... **
SM-60UAA-CA(CD) ...... 36
SM-60UAA-CE(CJ) ...... **
SM-60UAA-CK(CN) ...... **
SM-60UVB-CA(CD) ...... 36
SM-60UVB-CE(CJ)
SM-60UVB-CK(CN) ...... **

-115-

SM-70CBA-CA(CD) ...... 41
SM-70CBA-CE(CJ) ...... **
SM-70CBA-CK(CN) ...... **
SM-70CVA-LA(LD) ...... 41
SM-70CVA-LE(LJ) ........ **
SM-70CVA-LK(LN) ...... **
SM-70CVB-CA(CD) ...... 41
SM-70CVB-CE(CJ) ...... **
SM-70CVB-CK(CN) ...... **
SM-70CVC-CA(CD) ..... .41
SM-70CVC-CE(CJ) ...... **
SM-70CVC-CK(CN) ...... **
SM-70TAA-CA(CD) ...... 41
SM-70TAA-CE(CJ) ...... **
SM-70TAA-CK(CN) ...... **
SM-70TBA-CA(CD) ...... 41
SM-70TBA-CE(CJ) ...... **
SM-70TBA-CK(CN) ...... **
SM-70TVB-CA(CD) ...... 41
SM-70TVB-CE(CJ) ...... **
SM-70TVB-CK(CN) ...... **
SM-70TVC-CA(CD) ...... 41
SM-70TVC-CE(CJ) ...... **
SM-70TVC-CK(CN) ...... **
SM-WXLLA-AA(AD) ...... 12
SM-WXLLA-AE(AJ) ...... **
SM-WXLLA-AK(AN) ...... **
SM-WXLLA-BA(BD) ...... 12
SM-WXLLA-BE(BJ) ...... **
SM-WXLLA-BK(BN) ...... **
SM-WXLLA-CA(CD) ...... 12
SM-WXLLA-CE(CJ) ...... **
SM-WXLLA-CK(CN) ...... ••
SN-40UAA-CA(CD) ...... 31
SN-40UAA-CK(CN) ...... **
SN-70TAA-CA(CD) ..... .42
SN-70TAA-CK(CN)
SN-70TVA-CA(CD) ...... 42
SN-70TVA-CK(CN)
SN-70TBA-CA(CD) ...... 42
SN-70TBA-CK(CN)
SN-70CAA-CA(CD) ...... 42
SN-70CAA-CK(CN) ...... **
SN-70CVA-CA(CD) ...... 42
SN-70CVA-CK(CN) ...... **
SN-70CBA-CA(CD) ...... 42
SN-70CBA-CK(CN) ...... **
SR-30LLB-AA(AD) ...... 25
SR-30LLB-AE(AJ) ........ ••
SR-30LLB-AK(AN) ........ **

INDEX

System Code ...... Page

Option Number .... Page

SR-30LLB-BA(BO) ...... 25
SR-30LLB-BE(BJ) ........ **
SR-30LLB-BK(BN) ........ **
SR-30LLB-CA(CO) ...... 25
SR-30LLB-CE(CJ) ........ **
SR-30LLB-CK(CN) ...... **

SR-WXLLA-BA(BO) ...... 12
SR-WXLLA-BE(BJ) ...... **
SR-WXLLA-BK(BN) ...... **
SR-WXLLA-CA(CO) ...... 12
SR-WXLLA-CE(CJ) ...... **
SR-WXLLA-CK(CN) ...... **

BC050-25 ............ 18,74
BC05M-2C .............. 18

OPM2M-AO
OPM2M-AH
OPM2M-AM
OPM2M-OH
OPM2M-OM
OPM2M-OZ

SR-30SSB-AA(AO) ...... 25
SR-30SSB-AE(AJ) ........ **
SR-30SSB-AK(AN) ...... **
SR-30SSB-BA(BO) ...... 25
SR-30SSB-BE(BJ) ........ "
SR-30SSB-BK(BN) ...... **
SR-30SSB-CA(CO) ...... 25
SR-30SSB-CE(CJ) ........ **
SR-30SSB-CK(CN) ...... **

SV-AXHHB-CA(CO) ...... 46
SV-AXHHB-CK(CN) ...... **

SR-60LLA-CA(CO) ...... 35
SR-60LLA-CE(CJ) ........ **
SR-60LLA-CK(CN) ...... **

SV-AXCBA-CA(CO) ...... 46
SV-AXCBA-CK(CN) ...... **

SR-VXLLB-AA(AO) ...... 10
SR-VXLLB-AE(AJ) ........ **
SR-VXLLB-AK(AN) ...... **
SR-VXLLB-BA(BO) ...... 10
SR-VXLLB-BE(BJ) ........ **
SR-VXLLB-BK(BN) ...... **
SR-VXLLB-CA(CO) ...... 10
SR-VXLLB-CE(CJ) ........ **
SR-VXLLB-CK(CN) ...... **
SR-VXSSA-AA(AO) ...... 10
SR-VXSSA-AE(AJ) ...... **
SR-VXSSA-AK(AN) ...... **
SR-VXSSA-BA(BO) ...... 10
SR-VXSSA-BE(BJ) ...... **
SR-VXSSA-BK(BN) ...... **
SR-VXSSA-CA(CO) ...... 10
SR-VXSSA-CE(CJ) ...... **
SR-VXSSA-CK(CN) ...... **
SR-VXSSB-AA(AO) ...... 10
SR-VXSSB-AE(AJ) ...... **
SR-VXSSB-AK(AN) ...... **
SR-VXSSB-BA(BO) ...... 10
SR-VXSSB-BE(BJ) ...... **
SR-VXSSB-BK(BN) ...... **
SR-VXSSB-CA(CO) ...... 10
SR-VXSSB-CE(CJ) ...... **
SR-VXSSB-CK(CN) ...... **
SR-WXSSA-AA(AO) ...... 12
SR-WXSSA-AE(A.J) ...... **
SR-WXSSA-AK(AN) ...... **
SR-WXSSA-BA(BO) ...... 12
SR-WXSSA-BE(BJ) ...... **
SR-WXSSA-BK(BN) ...... **
SR-WXSSA-CA(CO) ...... 12
SR-WXSSA-CE(CJ) ...... **
SR-WXSSA-CK(CN) ...... **
SR-WXLLA-AA(AO) ...... 12
SR-WXLLA-AE(AJ)
SR-WXLLA-AK(AN) ...... **

SV-AXTVB-CA(CO) ...... 46
SV-AXTVB-CK(CN) ...... **
SV-AXTBA-CA(CO) ...... 46
SV-AXTBA-CK(CN) ...... **
SV-AXCVB-CA(CO) ...... 46
SV-AXCVB-CK(CN) ...... **

SYSTEM OPTIONS
Option Number

.... Page

AA11-K ................ 75
AA11-KT ................ 75
AAV11-A ................ 19
A011-K ................ 76
AOK11 KT .............. 76
AOV11-A ................ 19
AM11-K ................ 76
AR11 .................. 76
AR11-KT ................ 76
A014 .................... 82
A156 .................... 82
A157 .................... 82
A630 .................... 82
ATR16 .................. 82
BA 11-FE(FF) ............ 52
BA11-KE(KF) ............ 51
BA11-KW(KX) .......... 51
BA 11-LE(LF) ............ 51
BA11-ME(MF) .......... 17
BA11-NE(NF) ............ 17
BA 11-PE(PF) ............ 52
BC01V-25 .............. 18
BC03L-05 .............. 18
BC03M-25 ............ 18,74
BC03M-AO .............. 74
BC03M-B5 .............. 74
BC03M-EO .............. 74
BC03M-LO .............. 74

BC08R-01
BC08R-10
BC08R-20
BC08R-25
BC08R-50
BC08R-60
BC08R-AO

.............. 18
.............. 18
.............. 78
.............. 78
.............. 78
.............. 78
.............. 78

BC11A-02
BC11A-05
BC11A-08
BC11A-10
BC11A-15
BC11A-25

.............. 52
.............. 52
.............. 52
.............. 52
.............. 52
.............. 52

BC11S-25 .............. 74
BC20N-05 .............. 18
BC20M-50 .............. 18
BC21 B-05 .............. 18
BC40A .................. 82
BC40B .................. 82
BC40L .................. 82
BCV1A-10 .............. 18
BCV1 B-06 .............. 18

............ 80
............ 80
............ 80
............ 80
............ 80
............ 80

OPM2N-AM ............ 80
OPM2N-OM ............ 80
OPM4X ................ 80
OPMXX-A .............. 81
OPMXX-B .............. 81
OPM01-AA(AB) .......... 81
OPM23-A(O) ............ 81
OPM23-K(N) ............ 81
OPM23-CA(CO) .......... 81
OPM23-CK(CN) .......... 81
OPM50-AA(AB) .......... 82
OPM50-CA(CB) .......... 82
OPM50-FA(FB) .......... 82
OPM50-HA(HB) .......... 82
0011-0A .............. 72
0011-EA ................ 72

OB11-A ................ 52
0011-CF ................ 51
0011-CK ................ 51
0011-0F ................ 51
0011-0K ................ 51

OR11-B ................ 76
OR11-C ................ 77
OR11-K ................ 77
OR11-KT ................ 77
ORV11 .................. 19
ORV11-B ................ 19
ORV11-J ................ 19
ORV11-P ................ 19

OH11-AA(AC) .......... 69
OH11-AO ................ 69
OH11-AE ................ 69

OU11-0A ................ 70
OUP11-0A .............. 70
OUV11-0A .............. 16

BOV11·AA .............. 13

OL11-E ................ 67
OL11-WA .............. 67
OL11-WB .............. 67
OLV11 .................. 16
OLV11-E ................ 16
OLV11-EB .............. 16
OLV11-F ................ 15
OLV11-FA .............. 15
OLV11-FB .............. 15
OLV11-J ................ 16
OLV11-KA .............. 16

BC03N-AO .............. 74
BC04R-12 .............. 74
BC04Z-10 .............. 18
BC04Z-15 .............. 18
BC04Z-25 .............. 18

OM11-BB .............. 69
OM11-0A .............. 70
OM11-0B .............. 70
OM11-0C .............. 70
OMC11-AL .............. 70
OMC11-AR .............. 72
OMC11-0A .............. 72
OMC11-FA .............. 72
OMC11-MA ............ 71
OMC11-MO ............ 71

BC05C-25 .............. 18
BC050-10 .............. 74

ON11-AA ................ 73
ON11-0A ................ 73

-116-

OV11-AA ................ 73
OV11-BA ................ 73
OV11-BB ................ 73
OV11-BC ................ 73
OR780-AA(AB) .......... 47
OW780-AA(AB) ......... .47
OZ11-A ................ 68
OZ11-B ................ 68
OZ11-C ................ 68
OZ11-0 ................ 68
OZ11-E ................ 68
OZ11-F ................ 69
OZV11-B ................ 17
FP11-A ................ 28
FP11-C ................ 42
FP11-EA(EB) ............ 37
FP11-F .................. 32
FP780-AA(AB) .......... 47
G7272 .................. 82
H312-A ................ 74
H322 .................... 78
H323-B ................ 78
H332 .................... 82

Option Number .... Page

H334-E(J) .............. 82
H7112-A(B) ............. .48
H775-A ................ 29
H775-CA(CB) ............ 29
H7750-BA(BD) .......... 33

LA36-CE(CJ) ............ 63
LA36-HE(HF) ............ 63

MK11-CC(CD) .......... 43
MK11-CE .............. 43
MK11-CF ................ 43
MK11-CG(CH) ......... .43
MK11-UA .............. 44
MK11-EA(EB) .......... 44
MK11-EC(ED) .......... 44
MK11-FA(FB) ............ 44

RK07-EA(ED) ............ 56
RK07-FA(FD) ............ 56
RK07-PA(PD) ............ 56
RK07K-AC .............. 56
RK07K-DC .............. 56
RK07K-EF .............. 56

H952-AA(AB) ............ 53
H960-CA(CB) ............ 52
H960-CF(CG) ............ 53
H960-DH(DJ) ............ 53
H9600-AA(AB) ........ 38,52
H9601-AA(AB) .......... 38
H9602-BA(BB) .......... 38
H9602-CC(CD) .......... 52
H9602-DF(DH) .......... 48
H9602-HA(HB) .......... 48
H9603-BA(BB) .......... 38
H9603-CA .............. 38
H961-A ................ 53
H9610-AA(AB) .......... 17
H9612-AA(AB) .......... 17
H9613-AA(AB) .......... 17
H9616-BB(BC) .......... 17
H9617-BB(BC) .......... 17
H9618-BB(BC) .......... 17
IBV11-A ................ 19
IP112-AD(AD)
IP113-AD(AD)

.......... 79
.......... 79

IP302-A(D) .............. 79
IP302-VA(VD) .......... 79
IP302-E(J) .............. 79
IP302-VE(VJ) ............ 79
IP302-XK(XN) ............ 79
IPV12-AA(AD) .......... 79
KE11-B ................ 28
KE44-A ................ 32
KEF11-AA .............. 13
KEV11 ................ 4,13
KG11-A ................ 70
KK11-A ................ 28
KMC11-A .............. 67
KU116-AB .............. 37
KU116-AE .............. 37
KU116-AT .............. 37
KU116-AV .............. 37
KU116-BB .............. 37
KU780-YY .............. 47
KUV11-UH .............. 13
KW11-K ................ 77
KW11-P ................ 77
KWV11-A .............. 20
KY11-LB ................ 29
LA11-PA(PD) ............ 65
LA120-DA ............ 5,63
LA12X-AL .............. 63
LA34-DA ................ 4
LA35-CE(CJ) ............ 63

LA37-CE(CJ) ............ 63
LA37-PE(PJ) ............ 63
LA38-GA .............. 5,63
LA38-HA .............. 5,63
LAXX-KG .............. 63
LP05K-LL .............. 65
LP11-AA ................ 65
LP11-BA ................ 65
LP11-CA(CD) ............ 64
LP11-DA(DD) ............ 64
LP11-VA(VD) ............ 65
LP11-WA(WD) .......... 65
LP11-YA(YD) ........... 64
LP11-ZA(ZD) ............ 64
LPA11-K ................ 75
LPA11-KF .............. 75
LPA11-KK .............. 75
LPV11-PA(PD) .......... 64
LPV11-VA(VD) .......... 64
LPV11-WA(WD) .......... 64
M105 .................. 78
M5010 .................. 82
M5011 .................. 82
M5012 .................. 82
M5012-YA .............. 83
M5013 .................. 83
M5014 .................. 83
M5016 .................. 83
M6010 .................. 83
M6010-YA .............. 83
M6011 .................. 83
M6012 .................. 83
M6013 .................. 83
M6014 .................. 83
M783 .................. 78
M784 .................. 78
M785 .................. 78
M786 .................. 78
M7821 .................. 78
M7850 .................. 29
M920 .................. 78
M9301-YC ............. .44
MA780-AA(AB) .......... 48
MA780-BA(BB) .......... 48
MA780-C ................ 48
MF11-WP .............. 38
MJ11-BA(BB) ........... .44
MJ11-BC(BD) .......... 44
MJ11-BE ............... .44
MK11-BA(BB) ......... .43
MK11-BC(BD) ......... .43
MK11-BE ............. .43
MK11-BF ................ 43
MK11-BG(BH) .......... 43
MK11-BJ ............... .43
MK11-CA(CB) ......... .43

MM11-DP .............. 29
MM11-WP .............. 38
MM11-YP .............. 29
MMV11-A .............. 13
MR11-EA .............. 53
MRV11-AA .............. 13
MRV11-AC .............. 13
MRV11-BA .............. 13
MRV11-BC .............. 13
MRV11-C .............. 14
MS11-FP ................ 28
MS11-JP ................ 28
MS11-KE ................ 38
MS11-KF ................ 38
MS11-KG .............. 38
MS11-LB ................ 28
MS11-LD ................ 28
MS11-MB .............. 33
MS11-MC .............. 33
MS11-MD .............. 33
MS780-CC(CD) .......... 47
MS780-DA ............. .48
MS780-DB .............. 48
MS780-DC .............. 48
MS780-DD .............. 48
MSV11-B .............. 14
MSV11-DB .............. 14
MSV11-DC .............. 14
MSV11-DD .............. 14
MXV11-A2 .............. 14
MXV11-AA .............. 14
MXV11-AC .............. 14
PB11-AY ................ 14
PB11-AQ ................ 15
PB11K-AA .............. 15
PB11K-AB .............. 15
PB11K-AC .............. 15
PB11K-AD .............. 15
REM03-AA(AD) .......... 58
REM03-BA(BD) .......... 58
REM03-DA(DB) .......... 58
REP06-AA(AB) .......... 58
REP06-BA(BB) .......... 59
REP06-DA(DB) .......... 59
REV11-A ................ 15
REV11-C ................ 15
RJM02-AA(AD) .......... 57
RJP06-AA(AB) .......... 57
RJP06-BA(BB) .......... 57
RK07-C ................ 56

-117-

RK711-C ................ 55
RK711-EA(ED) .......... 55
RK711-FA(FD) .......... 55
RK711-PA(PD) .......... 55
RL01-AK ................ 56
RL01 K-DC .............. 56
RL11-AK ................ 55
RL02-AK ................ 56
RL02K-DC .............. 56
RL211-AK .............. 55
RLV11-AK .............. 54
RLV21-AK .............. 54
RM02-AA(AD) .......... 59
RM03-AA(AD) .......... 59
RM03-BA(BD) .......... 59
RM03-C ................ 59
RM03-P ................ 59
RP06-AA(AB) ............ 59
RP06-BA(BB) ............ 59
RP06-C ................ 59
RP06-P ................ 59
RT801-AA(AB) .......... 81
RT803-AA(AB) .......... 81
RT805-AA(AB) .......... 81
RT805-XC .............. 81
RT805-XD .............. 81
RWM03-AA(AD) ........ 57
RWM03-BA(BD) ........ 57
RWM03-C .............. 58
RWP06-AA(AB) .......... 58
RWP06-BA(BB) .......... 58
RWP06-C .............. 58
RX11-BA(BD) ............ 54
RX211-BA(BD) .......... 54
RXV11-BA(BD) .......... 54
RXV21-BA(BD) .......... 54
TE10W-AE(AJ) .......... 62
TE10W-EE(EJ) .......... 62
TE16-AE(AJ) ............ 62
TE16-EE(EJ) ............ 62
TEE16-AE(AJ) .......... 61
TEU45-KA(KB) .......... 62
TEU77-AB(AD) .......... 62
TEV11 .................. 17
TJE16-AA(AD) .......... 60
T JE16-EA(ED) .......... 61
TJU77-AB(AD) .......... 60
TME11-AA(AD) .......... 60
TME11-EA(ED) .......... 61
TS11-BA(BD) ............ 60
TS11-CA(CB) ............ 61

INDEX

Option Number .... Page

TS11-DA(DB) ............ 61

QJ813 .................. 86

QR511 .................. 97

TU45-KE(KF) ............ 62
TU77-AF(AJ) ............ 62

QJ906

................ 102

QR512 .................. 97

QJ907 .................. 87

QR520 .................. 97

QJ913 .................. 86

QR580 .................. 99

QJ916

................ 101

QR680 ................ 107

QJ918 ................ 91,99

QRD03 ................ 109

QJ919

QS050 ................ 113

TWE16-AA(AB) .......... 60
TWE16-EA(ED) .......... 61
TWU77-AB(AD) .......... 60
VT100-AA(AB) ........ 5,66
VT110-AA(AB) .......... 81
VT1XX-AA .............. 66
VT1XX-AB .......... 5,8,66
VT61-AA(AB) ............ 66
VT61-AE(AF) ............ 66
VT62-AA(AB) ............ 66
VT62-AC(AD) ............ 66

................ 105

QJ921 .................. 87

05051

................ 113

QJ922 .................. 87

ZE014

................ 114

QJ960 .................. 88
QJ962 .................. 92
QJ980 .................. 88

SYSTEM SOFTWARE

QJD58 .................. 86

................ 110

QJD63 .................. 89

QE053 ................ 114

QJD68 .................. 91

QE066 ................ 111

QJD69 .................. 94

QE070 ................ 111

QJD76 .................. 94

QE100 ................ 110

QJS60 .............. 96, 109

QE101

................ 111

QJV13 .................. 85

QE102 ................ 110

QJV41 .................. 85

QE105 ................ 112

QP011

................ 102

QE106 ................ 111

QP012

.............. 92,98

QE001

QE107 ................ 112

QP013 ................ 105

QE110 ................ 112

QP066 .............. 92,105

QE111

................ 113

QP100

.......... 90,98,104

QE707 ................ 113

QP230

.......... 90,98,104

QED01 ................ 112

QP240

.......... 91,98,105

QJ013 .................. 85

QP300 ................ 101

QJ015 .................. 88

QP301

QJ070 .............. 94,108

QP302 ................ 106

QJ170 .............. 95,107

QP310 ................ 101

QJ629 .................. 90

QP375 ................ 106

QJ633 .............. 96, 109

QP376 .................. 91

QJ642

QP602

................ 100

.............. 93,97

.......... 93,99, 107

QJ647 .................. 87

QP690 ................ 103

QJ684 .................. 93

QP901 .................. 93

QJ685 .................. 88

QP902 ................ 106

QJ694

................ 100

QPD10 ................ 102

QJ713 .................. 89

QPD71 ................ 109

QJ733 .............. 95,108

QR330 ...... , ......... 104

QJ734 .............. 95, 108

QR430 ................ 101

QJ737 .................. 90

QR435 ................ 102

QJ738 .................. 90

QR500 .................. 97

QJ739 .................. 90

QR501 .................. 97

QJ747 .............. 92,106

QR502 .................. 97

-118-

~
D

DIGITAL EQUIPMENT CORPORATION
TECHNICAL OEM GROUP

MAYNARD , MASSACHUSETTS 01754