Digital PDFs

EK-BA350-CG-E01

April 1994

150 pages

Original

0.8MB

Document:	StorageWorks Solutions Configuration Guide
Order Number:	EK-BA350-CG
Revision:	E01
Pages:	150
Original Filename:	https://manx-docs.org/collections/mds-199909/cd3/storage/ba350cge.pdf

OCR Text

StorageWorks™ Solutions
Configuration Guide
Order Number: EK–BA350–CG. E01
This manual describes the StorageWorks shelf building block subsystem,
StorageWorks products, compatible Digital systems, identifies the
related products, lists the rules for configuring a system, and provides
examples of the system configuration process.

Digital Equipment Corporation
Maynard, Massachusetts

April 1994
While Digital believes the information included in this publication is correct as of the date of
publication, it is subject to change without notice.
Digital Equipment Corporation makes no representations that the interconnection of its products
in the manner described in this document will not infringe existing or future patent rights, nor
do the descriptions contained in this document imply the granting of licenses to make, use, or sell
equipment or software in accordance with the description.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications.
FCC ID: A09–BA350
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

Reorient or relocate the receiving antenna
 Increase the separation between the equipment and receiver
 Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected

Consult the dealer or an experienced radio/TV technician for help
© Digital Equipment Corporation 1992, 1993, 1994.
Printed in the United States of America.
All rights reserved.
applicationDEC, AXP, CI, DEC, DECpc, DECraid, DECstation, DECsystem, Digital, HSC,
HSC50, HSC95, HSJ, HSJ40, HSR95, InfoServer, MicroVAX, MicroVAX 3100, OpenVMS, RX,
RZ, StorageWorks, TZ, ULTRIX, VAX, VAX 4000, VAXstation, VAXstation 4000, and the DIGITAL
logo are trademarks of Digital Equipment Corporation.
Hewlett-Packard is a registered trademark of Hewlett-Packard Company.
OSF and OSF/1 are trademarks of the Open Software Foundation, Inc.
Sun Microsystems is a registered trademark of Sun Microsystems, Inc.
UNIX is a registered trademark of X/Open Co. Ltd., Inc.
All other trademarks and registered trademarks are the property of their respective holders.
The postpaid READER’S COMMENTS card requests the user’s critical evaluation to assist in
preparing future documentation.

This document was prepared using VAX DOCUMENT Version 2.1.

Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 Introducing the StorageWorks Family
How to Use this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Building Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1
1.2
1.3
1.4
1.5
1.6

Part I

1–1
1–2
1–4
1–4
1–5
1–6

StorageWorks Products

2 StorageWorks Storage Devices
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10

StorageWorks Building Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5¼-inch SBBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3½-inch SBBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCSI Device Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optical Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cartridge Tape Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD–ROMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solid-State Disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Magazine Tape Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–2
2–3
2–4
2–4
2–4
2–5
2–5
2–6
2–7
2–7

3 StorageWorks Shelves
3.1
3.2
3.3

Shelves and Shelf Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shelf Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Cords—Desktop and Deskside Expansion Units . . . . . . . . . . . . . . .

3–3
3–4
3–5

4 StorageWorks Controllers, Converters, and Adapters
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8

HSJ-Series Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSZ40-Series SCSI Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSD05 DSSI Storage Array Controller . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSD30 Array Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCSI Bus Signal Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSZ1x-Series Disk Array Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSC Controller SCSI Channel Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
InfoServer Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–2
4–2
4–3
4–3
4–4
4–6
4–7
4–8

iii

5 StorageWorks Enclosures and Subsystems
SW800 Data Center Cabinet Subsystems . . . . . . . . . . . . . . . . . . . . . . . . .
SW500 Departmental Server Subsystems . . . . . . . . . . . . . . . . . . . . . . . . .
BA350–Kx Series Deskside Expansion Units . . . . . . . . . . . . . . . . . . . . . .
BA353-Ax Series Desktop Expansion Unit . . . . . . . . . . . . . . . . . . . . . . . .

5.1
5.2
5.3
5.4

5–3
5–8
5–13
5–15

6 StorageWorks Accessories
Part II

Digital StorageWorks Compatible Systems

7 Alpha AXP System StorageWorks Configurations
8 Digital VAX System StorageWorks Configurations
9 DECsystem StorageWorks Configurations
10 Personal Computer System StorageWorks Configurations
Part III StorageWorks Subsystem Planning
11 General Configuration Rules
11.1
11.2
11.3
11.4
11.5
11.6
11.6.1
11.6.2
11.7
11.7.1
11.7.2
11.7.3
11.8
11.9
11.10
11.11
11.12
11.13

Device Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SBB Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCSI Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSZ-Series Disk Array Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSZ40 SCSI Disk Array Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSJ Array Controller Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSJ Single Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSJ Single and Dual-Redundant Controllers . . . . . . . . . . . . . . . . . . .
HSC SCSI Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSC Controller SBB Shelf—Single SCSI Bus . . . . . . . . . . . . . . . . . . .
HSC Controller SBB Shelf—Dual SCSI Buses . . . . . . . . . . . . . . . . . .
HSC Controller Multiple SBB Shelves . . . . . . . . . . . . . . . . . . . . . . . .
HSD30 Array Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SW800 Data Center Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SW500 Data Center Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deskside Expansion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Desktop Expansion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11–2
11–3
11–4
11–5
11–5
11–6
11–6
11–7
11–8
11–8
11–8
11–9
11–10
11–11
11–12
11–12
11–13
11–14

12 StorageWorks SCSI Buses
12.1
StorageWorks Data Bus Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2
Terminating SCSI Buses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3
Computing SCSI Bus Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3.1
Single StorageWorks Shelf SCSI Bus Lengths . . . . . . . . . . . . . . . . . .
12.3.2
Multiple StorageWorks Shelves SCSI Bus Lengths . . . . . . . . . . . . . . .

12–1
12–2
12–2
12–2
12–4

13 StorageWorks SCSI Cables
13.1
13.2
13.3
13.4
13.4.1
13.4.2
13.4.3
13.4.4
13.4.5
13.4.6
13.4.7
13.5
13.5.1
13.5.2
13.6
13.7

SCSI Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Shelf SCSI Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommendations for StorageWorks Shelves . . . . . . . . . . . . . . . . . . . . . .
SCSI ‘‘A’’ Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21H-Series SCSI ‘‘A’’ Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21R-Series SCSI ‘‘A’’ Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BC09D-Series Cables SCSI ‘‘A’’ Cables . . . . . . . . . . . . . . . . . . . . . . . .
BC10U-Series Cables SCSI ‘‘A’’ Cables . . . . . . . . . . . . . . . . . . . . . . . .
BN31A-Series Cables HSC Controller ‘‘A’’ Cables . . . . . . . . . . . . . . . .
BN31B–02 Series HSC Controller ‘‘A’’ Cable . . . . . . . . . . . . . . . . . . . .
BN31B–03 HSC Controller ‘‘A’’ Cable . . . . . . . . . . . . . . . . . . . . . . . . .
SCSI ‘‘P’’ Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21K-Series SCSI ‘‘P’’ Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21L-Series StorageWorks SCSI ‘‘P’’ Cables . . . . . . . . . . . . . . . . . . .
Special SCSI Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H885–AA Trilink Connector Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13–2
13–2
13–2
13–3
13–4
13–4
13–4
13–5
13–5
13–6
13–6
13–7
13–7
13–8
13–8
13–12

14 StorageWorks DSSI Cables
15 Designing a StorageWorks Subsystem
15.1
15.2
15.3

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Controller and SBB Shelf . . . . . . . . . . . . . . . . . . . . . . . . . .
Combination BA350–Ex and BA350–Sx StorageWorks Subsystem . . . . . .

15–1
15–2
15–4

A StorageWorks Product Specifications
A.1
A.2
A.3
A.4

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environmental Stabilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A–1
A–2
A–3
A–4

StorageWorks Glossary
Index
Figures
1–1
1–2
1–3
1–4
1–5
1–6
1–7
2–1
2–2
3–1
3–2

StorageWorks Subsystem Components . . . . . . . . . . . . . . . . . . . . . . . .
Typical 5¼-Inch and 3½-Inch SBBs . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical SBB Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical Controller Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BA353–Ax Desktop Expansion Unit . . . . . . . . . . . . . . . . . . . . . . . . . .
RAID Array Subsystem with Two Deskside Expansion Units . . . . . . .
Typical SW500-Series and SW800-Series Cabinets . . . . . . . . . . . . . . .
Typical Full-Height 5¼-inch Storage Device SBB . . . . . . . . . . . . . . . .
Typical 3½-inch Storage Device SBB . . . . . . . . . . . . . . . . . . . . . . . . .
Typical SBB Shelf (3½-inch SBBs ) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical SBB Shelf (3½-inch and 5¼-inch) SBBs . . . . . . . . . . . . . . . . .

1–3
1–4
1–5
1–5
1–6
1–7
1–7
2–3
2–4
3–1
3–2

4–1
4–2
4–3
4–4
4–5
4–6
5–1
5–2
5–3
5–4
11–1
11–2
11–3
11–4
12–1
12–2
13–1
13–2
13–3
13–4
13–5
13–6
13–7
13–8
13–9
13–10
13–11
13–12
13–13
13–14
13–15
13–16
13–17
13–18
14–1
15–1
15–2

Typical HSJ-Series Controller Shelf Installation . . . . . . . . . . . . . . . . .
HSD05 DSSI Storage Array Controller . . . . . . . . . . . . . . . . . . . . . . . .
Typical Host–SBB Shelf SCSI Bus Cabling . . . . . . . . . . . . . . . . . . . . .
Typical StorageWorks RAID Array Subsystem Expansion Unit . . . . .
HSS9X–Ax ‘‘K.scsi’’ Controller Card . . . . . . . . . . . . . . . . . . . . . . . . . .
InfoServer Controller SWDCI–AA . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical SW800 Data Center Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical SW500 Departmental Server . . . . . . . . . . . . . . . . . . . . . . . . .
RAID Array Subsystem Dual BA350–KB Deskside Expansion
Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical BA353-Ax Deskside Expansion Unit . . . . . . . . . . . . . . . . . . . .
Typical SBB Shelf—Device Addresses . . . . . . . . . . . . . . . . . . . . . . . . .
Typical 5¼-Inch SBB Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BA350–SA SBB Shelf (Redundant AC Power Supplies) . . . . . . . . . . .
BA353–AA Desktop Expansion Unit . . . . . . . . . . . . . . . . . . . . . . . . . .
SCSI Bus Segments—Single SBB Shelf . . . . . . . . . . . . . . . . . . . . . . .
SCSI Bus Segments—Multiple SBB Shelf . . . . . . . . . . . . . . . . . . . . . .
BN21H-Series Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21R-Series Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BC09D-Series Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BC10U-Series Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN31A-Series Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN31B–02 50-Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN31B–03 50-Pin, High-Density HSC Controller Connector . . . . . . .
BN21K-Series Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21L-Series Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical ‘‘Y’’ Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21P–0B ‘‘Y’’ Cable Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21V–0B ‘‘Y’’ Cable Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21W–0B ‘‘Y’’ Cable Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21X–0B ‘‘Y’’ Cable Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .
BN21Y–0B ‘‘Y’’ Cable Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .
H885–A Trilink Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSZ-Series Controller—End-Bus Position . . . . . . . . . . . . . . . . . . . . . .
HSZ Controller—Mid-Bus Position . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSD05 DSSI Trilink Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical StorageWorks Controller and SBB Shelf . . . . . . . . . . . . . . . . .
Typical Combination BA350–Ex and BA350–Sx StorageWorks
Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–2
4–3
4–5
4–6
4–7
4–8
5–3
5–8
5–13
5–15
11–2
11–3
11–11
11–14
12–3
12–5
13–4
13–4
13–5
13–5
13–6
13–6
13–7
13–8
13–8
13–10
13–10
13–11
13–11
13–12
13–12
13–13
13–14
13–14
14–4
15–2
15–4

Tables
1
2–1
2–2
2–3
2–4
2–5
2–6
2–7
3–1
3–2
3–3
3–4
4–1
5–1
5–2
5–3
5–4
5–5
5–6
5–7
6–1
7–1
7–2
7–3
7–4
7–5
7–6
7–7
8–1
8–2
8–3
9–1
9–2
10–1
11–1
12–1
12–2
12–3
13–1

StorageWorks Related Documentation . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Devices—General Description . . . . . . . . . . . . . . . . . . .
StorageWorks Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Optical Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Cartridge Tape Drives . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks CD–ROM Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Solid State Disks (SSDs) . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks DLT Magazine Tape Subsystems . . . . . . . . . . . . . . . . .
SBB Shelf Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Shelves and Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Country-Specific Power Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks SCSI Bus Converters Description . . . . . . . . . . . . . . . . .
StorageWorks Enclosure System Configurations Categories . . . . . . . .
SW800-Series Data Center Cabinets—Configure-to-Order Subsystems
.......................................................
SW800-Series Data Center Cabinets—Factory-Configured Subsystems
.......................................................
SW500-Series Departmental Cabinets—Configure-to-Order
Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SW500-Series Departmental Cabinets—Factory-Configured
Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deskside Expansion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Desktop Expansion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Accessories, Kits, and Components . . . . . . . . . . . . . . .
DEC 3000 AXP Deskside StorageWorks Configurations . . . . . . . . . . .
DEC 3000 AXP Desktop StorageWorks Configurations . . . . . . . . . . . .
DEC 2000 AXP Server StorageWorks Configurations . . . . . . . . . . . . .
DEC 7000 AXP Data Center Servers StorageWorks Configurations
.......................................................
DEC 4000 AXP Servers StorageWorks Configurations . . . . . . . . . . . .
DEC 10000 AXP Mainframe Class Servers StorageWorks
Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DEC Personal Computer AXP (DECpc™AXP) StorageWorks
Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MicroVAX 3100 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VAXstation 4000 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VAX 4000 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Personal DECstation 5000 Workstations – UNIX®-Based RISC . . . . .
DECstation 5000 Workstations—UNIX®-Based RISC . . . . . . . . . . . .
applicationDEC 400xMP Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Raid Array Subsystem 110 Configuration Rules . . . . . .
SCSI Bus Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single SBB Shelf SCSI Bus Lengths . . . . . . . . . . . . . . . . . . . . . . . . . .
Multiple SBB Shelves SCSI Bus Lengths . . . . . . . . . . . . . . . . . . . . . .
SCSI ‘‘A’’ Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

xi
2–1
2–5
2–5
2–6
2–7
2–7
2–7
3–2
3–3
3–4
3–5
4–4
5–2
5–4
5–6
5–9
5–11
5–13
5–15
6–1
7–3
7–4
7–5
7–6
7–7
7–8
7–9
8–3
8–4
8–6
9–3
9–4
10–2
11–5
12–2
12–3
12–4
13–3

vii

13–2
13–3
13–4
14–1
14–2
A–1
A–2
A–3
A–4

viii

SCSI ‘‘P’’ Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a ‘‘Y’’ SCSI Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Trilink Connectors and SCSI Terminator Blocks . . . . .
Host System to StorageWorks DSSI Cables . . . . . . . . . . . . . . . . . . . .
HSD05 Interconnecting DSSI Cables . . . . . . . . . . . . . . . . . . . . . . . . .
StorageWorks Power Supply Specifications . . . . . . . . . . . . . . . . . . . . .
StorageWorks Products Physical Specifications . . . . . . . . . . . . . . . . . .
StorageWorks Environmental Specifications . . . . . . . . . . . . . . . . . . . .
Thermal Stabilization Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .

13–7
13–9
13–12
14–2
14–3
A–1
A–2
A–3
A–4

Preface
The StorageWorks Solutions Configuration Guide describes the StorageWorks™
shelf building block subsystem, StorageWorks products, compatible Digital™
systems, identifies the related products, lists the rules for configuring a system,
and provides examples of the system configuration process.
Note
The configurations defined in this manual are for guidance only. They are
current and correct as of the date of publication but are subject to change
without notice.

Intended Audience
This manual is for use by personnel responsible for designing and configuring a
StorageWorks subsystem.

Structure
This manual is organized as follows:

Chapter 1
Introducing the StorageWorks Family

This chapter is an overview of the StorageWorks product line,
to include SBBs, shelves, enclosures, and related products.

Part I – StorageWorks Products
Chapter 2
StorageWorks Storage Devices

Describes the StorageWorks storage devices to include disks,
tapes, CD–ROMs, solid state disks, and magazine tape
subsystems.

Chapter 3
StorageWorks Shelves

Describes the StorageWorks shelves, their functions, and use.

Chapter 4
StorageWorks Controllers, Converters,
and Adapters

Describes the StorageWorks controllers, converters, and
adapters that can integrate the StorageWorks 8-bit, singleended SCSI bus with a different host computer bus.

Chapter 5
StorageWorks Enclosures and
Subsystems

Describes the StorageWorks enclosures including SW500,
SW800, deskside, and desktop enclosures. Configure-to-order
and factory-configured subsystems are described to include
storage capacity, controllers, devices, shelves, and so forth.

Chapter 6
StorageWorks Accessories

Describes the various StorageWorks components such as
shelves, upgrade kits, and so forth.

Part II – Digital StorageWorks Compatible Systems
Chapter 7
Alpha AXP System StorageWorks
Configurations

Describes Alpha AXP™ StorageWorks configurations to include
shelves, SCSI cables, enclosures, and SBBs.

Chapter 8
Digital VAX System StorageWorks
Configurations

Describes VAX™ StorageWorks configurations to include
shelves, SCSI cables, enclosures, and SBBs.

Chapter 9
DECsystem StorageWorks Configurations

Describes DEC™ StorageWorks configurations to include
shelves, SCSI cables, enclosures, and SBBs.

Chapter 10
Personal Computer System
StorageWorks Configurations

Describes Digital personal computer (PC) StorageWorks
configurations to include shelves, SCSI cables, enclosures,
and SBBs.
Part III – StorageWorks Subsystem Planning

Chapter 11
General Configuration Rules

Describes the general configuration rules for StorageWorks
subsystem.

Chapter 12
StorageWorks SCSI Buses

Describes the StorageWorks SCSI bus, termination, cabling,
and interconnections.

Chapter 13
StorageWorks SCSI Cables

A comprehensive description of the StorageWorks SCSI cables
to include lengths, connectors, special cables, and use.

Chapter 14
StorageWorks DSSI Cables

A comprehensive description of the StorageWorks DSSI cables
to include lengths, connectors, special cables, and use.

Chapter 15
Designing a StorageWorks Subsystem

Describes the procedures for designing a typical StorageWorks
subsystem.

Appendix A
StorageWorks Product Specifications

Describes the physical, environmental, and performance
specifications of the StorageWorks subsystem components.

Glossary

Contains the definitions of StorageWorks subsystem terms.

Index

A cross-reference to major topics.

Documentation Conventions
The following conventions are used in this manual:

boldface type

Boldface type indicates the first instance of terms being defined in text,
in the glossary, or both.

italic type

Italic type indicates emphasis and complete manual titles. In the
glossary, italic type is also used to indicate cross-references.

Related Documents
Table 1 lists the StorageWorks-related user documents organized by use, system,
or product.
Table 1 StorageWorks Related Documentation
Document Title

Order Number
StorageWorks Primary Publications

StorageWorks Solutions Configuration Guide

EK–BA350–CG

StorageWorks Solutions Shelf and SBB User’s Guide

EK–BA350–UG

StorageWorks RAID Array 110 Subsystem
DEC RAID Utilities User’s Guide

EK–DECRA–UG

HSZ10–AA Controller Site Preparation Guide

EK–HSZ10–IN

StorageWorks Expansion Storage Pedestal User’s Guide

EK-SMCPA-UG

StorageWorks RAID Array 110 Subsystem User’s Guide

EK–SM2CA–UG

StorageWorks RAID Array 110 Utility for MS–DOS User’s Guide

AA–Q0N5A–TE

StorageWorks RAID Array 110 Utility for Novell NetWare User’s Guide

AA–Q0N4A–TE

StorageWorks RAID Array 110 Utility for SCO UNIX User’s Guide

AA–Q0N6A–TE

StorageWorks Array Controller 140-Series
StorageWorks Array Controller HS Family of Array Controllers User’s Guide

EK–HSFAM–UG

StorageWorks BA350–MA Controller Shelf User’s Guide

EK–350MA–UG

DECraid™+ Rackmount Storage Subsystem and HSC™ Intelligent I/O Servers
HSC Controller User’s Guide
HSC Controller Installation Manual

AA–PFSQA–TK
EK–HSCMN–IN
(continued on next page)

Table 1 (Cont.) StorageWorks Related Documentation
Document Title

Order Number
StorageWorks Enclosures

BA35X–VA Vertical Mounting Kit User’s Guide

EK–350SV–UG

InfoServer 1000 Installation and Owner’s Guide

EK–INFLC–OM

StorageWorks Solutions Desktop Expansion Unit User’s Guide

EK–BA353–UG

StorageWorks Solutions SW500 and SW800 Cabinet Metric Shelf Bracket Kit
Installation Guide

EK–35XRD–IG

StorageWorks Solutions HSR95-Series Cabinet Metric Shelf Bracket Kit Installation
Guide

EK–35XRC–IG

StorageWorks RETMA Shelf Rail Kit Installation Guide

EK–35XRB–IG

StorageWorks Solutions SW500-Series Cabinet Installation and User’s Guide

EK–SW500–IG

StorageWorks Solutions SW500-Series Cabinet Cable Distribution Unit Installation
Guide

EK–SW5CU–IG

StorageWorks Solutions SW800-Series Data Center Cabinet Cable Distribution Unit
Installation Guide

EK–SWCDU–IS

StorageWorks Solutions SW800-Series Data Center Cabinet Installation and User’s
Guide

EK–SW800–IG

Instructions for Installation of the Tape Bezel Kit on SF400 Series Cabinets‡

EK–SFTBK–IS

Storage Devices
SCSI Signal Converter DWZZA–AA

EK–DWZZA–SV

SCSI Signal Converter DWZZA–MA

EK–DWZZM–SV

SCSI Signal Converter DWZZA–VA

EK–DWZAA–SV

StorageWorks Building Blocks User’s Guide

EK–SBB35–UG

StorageWorks Solutions 3½-Inch Storage Device Installation Guide

EK–MC350–IG

StorageWorks Solutions 5¼-Inch Storage Device Installation Guide

EK–MC525–IG

TZ86–VA Cartridge Tape Drive Device Addresses

EK–TZ86A–UG

TZ87–VA Cartridge Tape Drive Device Addresses

EK–TZ87A–DA

StorageWorks Solutions TZ8x7-Series Tape Drive SCSI Bus Configuration and
Installation Guide

EK–TZ8X7–IG

General Reference Publications
Digital Systems and Options Catalog

†

Small Computer System Interface, An Overview

EK–SCSIS–OV

Small Computer System Interface, A Developer’s Guide

EK–SCSIS–DK

† Available from your Digital account representative.
‡ Applies also to StorageWorks cabinets.

xii

1
Introducing the StorageWorks Family
The StorageWorks family of products is a low-cost, extremely flexible mass
storage solution, that permits the user to design a StorageWorks subsystem to
meet system-specific needs. This chapter is an introduction to the StorageWorks
product line and includes a general description of the products, components, and
features.
Note
The configurations defined in this manual are for guidance only. They are
current and correct as of the date of publication but are subject to change
without notice.

1.1 How to Use this Guide
Use this configuration guide as the starting point for developing a StorageWorks
subsystem. This guide addresses the major considerations for designing a
StorageWorks subsystem. Consider the following factors when designing your
subsystem:
•

Host Computer System
The host computer system to include the operating system and revision level;
the SCSI (small computer system interface) controller or adapter used;
the SCSI bus speed (fast or slow); and the SCSI connector type (high- or
low-density, single-ended or differential, 50- or 68-pin). Each of these are
discussed in the detail required for planning and configuring a system. Refer
to the host or controller documentation for detailed information.

•

StorageWorks Subsystem Use
A subsystem used for expansion storage does not require as much planning as
as a RAID 5 (random array of independent disks level 5) subsystem.

•

Storage Devices
When selecting a storage device you must consider the media type, storage
capacity, reliability, and, when using multiple media types, the media must be
compatible with the SCSI controller.

•

FCC Operating Environment
All StorageWorks components can be used in a Class A environment. Some
of the components can be used in a Class B (home) environment. All the
components selected for a home environment must be certified as being FCC
Class B compliant.

Introducing the StorageWorks Family 1–1

This guide is organized into three major sections:
For Information About

See

StorageWorks products including
storage devices, controllers,
shelves, and enclosures

Part I—StorageWorks Products

Digital systems that use
StorageWorks subsystems

Part II—Digital StorageWorks Compatible Systems

Considerations for designing
a StorageWorks SCSI bus
to include cables and the
general rules for configuring
a StorageWorks subsystem

Part III—StorageWorks Subsystem Planning

1.2 Product Features
The StorageWorks subsystem shown in Figure 1–1 has the following features:
•

Low-cost SCSI device storage subsystems

•

Snap-in devices for instant installation and removal

•

The ability to mix 3½-inch and 5¼-inch storage devices

•

The freedom to design your own system

•

A redundant power option

•

Redundant cooling

•

Vertical or horizontal shelf orientation

•

Locking cabinets for security of high-dollar value, portable storage devices

•

Visual indication of shelf status, power supply status, storage device activity,
and storage device status

•

Automatic reporting of shelf status to host

•

The capability to swap power supplies and storage devices without powering
down the system

1–2 Introducing the StorageWorks Family

Figure 1–1 StorageWorks Subsystem Components

STORAGEWORKS
BUILDING BLOCKS
(SBBs)

STORAGEWORKS
ENCLOSURES

SHELVES

DESKTOP EXPANSION
3 1/2" SBBs
DISKS
TAPES

5 1/4" SBBs
DISKS
TAPES
CD-ROMS

HALF HEIGHT
DESKSIDE EXPANSION
SBB
FULL HEIGHT

SIGNAL
CONVERTERS
CONTROLLER
AND SBB

POWER
AC
DC
BACKUP

DATA CENTER CABINET

CONTROLLERS

CONTROLLER

CXO-3816A-MC

Introducing the StorageWorks Family 1–3

1.3 StorageWorks Building Blocks
The StorageWorks building blocks (SBBs), shown in Figure 1–2, are the basic
building blocks of the StorageWorks subsystem. They are available for both 3½inch and 5¼-inch form factor devices. You can order SBBs with storage devices
installed or you can install third-party devices in a StorageWorks modular
carrier to create an SBB. SCSI bus converters, adapters, and power supplies can
also be mounted in SBBs.
Figure 1–2 Typical 5¼-Inch and 3½-Inch SBBs

CXO-4198A-PH

1.4 StorageWorks Shelves
The StorageWorks shelves (refer to Figure 1–1) fit into any enclosure that can
accommodate a 445 millimeter (17.5 inch) device in either the horizontal or
vertical position. The mounting bracket kits permit installing a shelf in either a
data center cabinet with a metric mounting hole pattern or an HSC™ controller
cabinet with a Radio-Electronics-Television Manufacturer’s Association (RETMA)
mounting hole pattern. The shelf types include the following:
•

The basic SBB shelf, shown in Figure 1–3, contains SBBs and power
supplies.

1–4 Introducing the StorageWorks Family

Figure 1–3 Typical SBB Shelf

(7)
POWER

SCSI
CONNECTORS

CXO-3617B-PH

•

The controller shelf, shown in Figure 1–4, contains SCSI bus controllers,
cache memories, and power supplies.

Figure 1–4 Typical Controller Shelf

CXO-3660A-PH

•

A controller and SBB shelf contains SCSI bus controllers, SBBs, and power
supplies.

All of these shelves require either an ac or dc input power supply mounted in an
SBB. The BA350–JA SBB shelf kit includes an ac power supply and the mounting
hardware. See the individual shelf user’s guide for a detailed description of a
particular shelf.

1.5 StorageWorks Controllers
The controllers (refer to Figure 1–1) are the interface between the host computer
and the SCSI–2 devices. These controllers are not interchangeable and can be
used only with a specific type host.
The function and purpose of the StorageWorks controllers are model specific. The
controllers are mounted in special shelves such as the one shown in Figure 1–4.

Introducing the StorageWorks Family 1–5

1.6 StorageWorks Enclosures
StorageWorks enclosures (SW500-series and SW800-series cabinets, and
BA350–Kx deskside expansion units) are used for mounting shelves. Desktop
expansion units (BA353–Ax) are used for mounting SBBs. Each enclosure
has a switch-controlled ac or dc power distribution unit. SW500-series and
SW800-series cabinet shelf mounting brackets are available in either the RETMA
or the metric mounting hole pattern.
The following enclosures can be used for StorageWorks products:
•

BA353–Ax series desktop expansion unit1 for mounting SBBs for use with
workstations and PCs as shown in Figure 1–5.

Figure 1–5 BA353–Ax Desktop Expansion Unit

CXO-3679A_PH

•

Deskside expansion unit for mounting shelves such as the BA350–Kx series
similar to the one shown in Figure 1–6.

•

Cabinets for mounting multiple SBB shelves and controller SBB shelves such
the SW500-series departmental servers and the SW800-series data center
cabinets, shown in Figure 1–7.

The desktop storage expansion unit includes an internal power supply and does not
require an SBB power supply.

1–6 Introducing the StorageWorks Family

Figure 1–6 RAID Array Subsystem with Two Deskside Expansion Units

SHR-XR3000-VIF

Figure 1–7 Typical SW500-Series and SW800-Series Cabinets

CXO-4201A-PH

Introducing the StorageWorks Family 1–7

Part I
StorageWorks Products
Part I contains descriptions of the StorageWorks products organized by product
type, as follows:
For information about

See

Accessories

Chapter 6, StorageWorks Accessories

Adapters

Chapter 4, StorageWorks Controllers, Converters, and Adapters

BA350–JA Shelf Kit

Chapter 3, StorageWorks Shelves

BA350–Ex/Mx/Sx Shelves

Chapter 3, StorageWorks Shelves

BA353–Ax Desktop Expansion Units

Chapter 5, StorageWorks Enclosures and Subsystems

BA35x–Kx Deskside Expansion Units

Chapter 5, StorageWorks Enclosures and Subsystems

BA655–Ax Plug-In Unit

Chapter 5, StorageWorks Enclosures and Subsystems

Cartridge Tape Drives

Chapter 2, StorageWorks Storage Devices

CD–ROMs

Chapter 2, StorageWorks Storage Devices

Controller Shelves

Chapter 3, StorageWorks Shelves

SBB Shelves

Chapter 3, StorageWorks Shelves

Controllers

Chapter 4, StorageWorks Controllers, Converters, and Adapters

Disk Drives

Chapter 2, StorageWorks Storage Devices

HSC/HSD/HSJ/HSZ-Series Controllers

Chapter 4, StorageWorks Controllers, Converters, and Adapters

InfoServer Controller

Chapter 4, StorageWorks Controllers, Converters, and Adapters

Magazine Tape Subsystems

Chapter 2, StorageWorks Storage Devices

Power Supplies and Power Cords

Chapter 3, StorageWorks Shelves

Signal Converters

Chapter 4, StorageWorks Controllers, Converters, and Adapters

Solid State Disks

Chapter 2, StorageWorks Storage Devices

SW500/SW800-Series Enclosures

Chapter 5, StorageWorks Enclosures and Subsystems

SW1000 Controller

Chapter 4, StorageWorks Controllers, Converters, and Adapters

Tape Drives

Chapter 2, StorageWorks Storage Devices

2
StorageWorks Storage Devices
This chapter contains descriptions of the StorageWorks storage devices. Check
with your Digital account representative for availability of additional devices.
Note
No attempt has been made to define StorageWorks compatible third-party
storage devices.
Devices that meet the basic criteria defined in Table 2–1 may be installed
in a modular carrier to create an SBB (StorageWorks building block).

Table 2–1 lists the general specifications for all StorageWorks devices.
Table 2–1 StorageWorks Devices—General Description
Criteria

Definition

Interface

The StorageWorks SCSI bus is SCSI–3 compliant. However,
the shelves only support single-ended SCSI–2 devices.

Device size (form factor)

3½-inch full-height or low-profile, fixed or removable media
devices.
5¼-inch half-height or full-height, fixed or removable media
devices.

Power

The total power requirements for the devices in one shelf
cannot exceed 131 watts. To make sure this requirement is
met, devices must spin up sequentially at 4-second intervals.

Heat dissipation

The SBB shelf blowers provide sufficient air flow to cool devices
mounted in an SBB.

SBB qualification

All Digital devices have been tested in an approved
StorageWorks configuration (that is, shelf, enclosure, power
supply, cabling, sequential device spin-up at 4-second intervals,
and so forth) and are in complete compliance with countryspecific standards (for example, FCC, TUV, CSA, and so forth)
and with Digital standards.
Customers are responsible for testing third-party devices for
compliance with country-specific standards.

FCC certification

All StorageWorks storage devices have been certified as being
FCC Class A compliant. Some devices have been certified as
being Class B compliant. FCC Class B installations require
that all components, specifically the shelf, power supply, and
storage devices, must all be Class B compliant. Use of a single
Class A component in a subsystem requires that the subsystem
be used only in a Class A environment. All SW500-series
departmental servers and SW800-series data center cabinets
can be used only in a Class A environment.

StorageWorks Storage Devices

2–1

For information about a specific type device, see the following sections:
Cartridge tape drives—Section 2.7
CD–ROMs—Section 2.8
Disk drives—Section 2.5
Magazine tape subsystems—Section 2.10
Solid-state disks—Section 2.9
Optical disk drives—Section 2.6
Information is presented in a tabular form and is organized by form factor, either
3½-inch or 5¼-inch, with their basic specifications (for example, capacity, media,
transfer rate, rotational speed, and so forth). Detailed specifications are listed in
the Digital Systems and Options Catalog.

2.1 StorageWorks Building Blocks
The primary StorageWorks building block (SBB) is a SCSI–2 storage device
mounted in either a 3½-inch or 5¼-inch carrier. The first step in designing a
system is selecting storage devices with the following features:
•

Compatible media

•

Required storage capacity
Note
The SBB connectors are 96-pin female DIN connectors that provide
positive mating with the SBB shelf male connectors. The connector design
ensures that dc power is present until after the SCSI bus connection is
broken and that dc power is applied before the SCSI bus connection is
made. This feature protects the integrity of the SCSI data bus and avoids
introducing noise on the bus that could either distort data or cause the
bus to ‘‘hang.’’
The SBB connector is a simple, highly reliable mechanism that can
support 200 SBB replacement cycles. Removing and replacing an SBB
constitutes one replacement cycle. Over the projected StorageWorks
active product life of 5 years, this equates to 40 replacement cycles per
year, or approximately 1 cycle every 9 days. Excessive replacement cycles
wear away the gold contact coating and thus destroys the integrity of
the connection. The replacement cycle limit applies equally to shelf
connectors and device connectors.
Environments requiring a greater number of replacement cycles are not
supported and are considered as improper treatment or use (paragraph
9.4b of U.S. Standard Terms and Conditions). Products or connectors
damaged because of a higher number of replacement cycles are not
eligible for return under warranty and standard service plans.
Digital Equipment Corporation markets a distinct family of removable
storage elements for higher replacement cycle environments. Contact
your Digital Account Representative for more information.

2–2 StorageWorks Storage Devices

2.2 5¼-inch SBBs
The 5¼-inch SBB shown in Figure 2–1 can accommodate the following 5¼-inch
form factor devices:
•

Fixed media devices

•

Removable media devices

•

One full-height (82.6 mm [3.25 inch]) device

•

Two half-height (43.2 mm [1.7 inch]) devices

•

Three one-third height devices (_ _._ mm [_._ inch]) devices

Figure 2–1 Typical Full-Height 5¼-inch Storage Device SBB

CXO-4197A-PH

The following are the general rules for mounting half-height and one-third height
devices in one 5¼-inch carrier:
•

Different device types can be mounted in the same carrier, for example, a
tape drive and a CD–ROM.

•

The first device is normally mounted in the lower part of the carrier.1

•

The second device is normally mounted in the upper part of the carrier.
Unless specifically stated otherwise, the second device can be installed by the
user.

The InfoServer SWDCI–AA is an exception. It is always mounted in the upper part of
the carrier even when it is the only device in the carrier.

StorageWorks Storage Devices

2–3

2.3 3½-inch SBBs
The 3½-inch SBB shown in Figure 2–2 can accommodate either a full-height (40.7
mm [1.6 inch]) or a low-profile (less than 25.4 mm [1-inch]) fixed or removable
media 3½-inch form factor storage device.
Figure 2–2 Typical 3½-inch Storage Device SBB

CXO-4196A-PH

2.4 SCSI Device Addresses
The SBB device addresses can be assigned either automatically by the SBB
shelf connectors or manually with the device address switches on the rear of the
SBB. See the StorageWorks Solutions Shelf and SBB User’s Guide for detailed
information on setting SBB device addresses.
Note
Not all 3½-inch SBBs have a device address switch. In these cases, the
device address is always assigned by the SBB shelf connector.

2.5 Disk Drives
Table 2–2 describes the Digital StorageWorks disk drives.
CAUTION
Do not operate 5¼-inch disk drives in the inverted position or the media
may be damaged.

2–4 StorageWorks Storage Devices

Table 2–2 StorageWorks Disk Drives
3½-Inch SBB
Device

Type

Capacity

Rotational
Speed

SCSI Transfer

FCC

RZ25–VA
RZ25L–VA†
RZ26–VA
RZ26L–VA†
RZ28–VA
RZ28B–VA

Fixed
Fixed
Fixed
Fixed
Fixed
Fixed

426.00 MB
525.00 MB
1.05 GB
1.05 GB
2.10 GB
2.10 GB

4412 r/min
5400 r/min
5400 r/min
5400 r/min
5400 r/min
5400 r/min

5 MB/s
5 MB/s
5 MB/s
5 MB/s
10 MB/s
10 MB/s

Class A
Class B
Class A
Class B
Class A
Class A

Rotational
Speed

SCSI Transfer

FCC

3600 r/min
5400 r/min

10 MB/s
10 MB/s

Class A
Class A

5¼-Inch Full-Height SBB
Device

Type

RZ73–VA
RZ74–VA

Fixed
Fixed

Capacity
2.00 GB
3.50 GB

† Low-profile device.

2.6 Optical Disk Drives
Table 2–3 describes the StorageWorks removable, rewritable optical disk drives.
Table 2–3 StorageWorks Optical Disk Drives
5¼-Inch Full-Height SBB
Maximum Transfer Rates
Device

Capacity

Read

Write

SCSI

FCC

RWZ52–VA

1.3 GB

1.6 MB/s

0.8 MB/s

5 MB/s

Class A

2.7 Cartridge Tape Drives
Table 2–4 describes the StorageWorks cartridge tape drives.
CAUTION
Do not operate cartridge tape drives in the inverted position or the media
may be damaged.

StorageWorks Storage Devices

2–5

Table 2–4 StorageWorks Cartridge Tape Drives
3½-Inch SBB
Device

Tape Type

Capacity

Data Transfer

SCSI Transfer

FCC

TLZ06–VA

4 mm DAT

4 GB

366 KB/s

4 MB/s

Class A

5¼-Inch SBB—Full-Height Devices
Device

Tape Type

Capacity

Data Transfer

SCSI Transfer

FCC

TKZ09–VA
TLZ6L–VA††
TZ86–VA
TZ87–VA
TZ87N–VA

Helical scan
RDAT
DLT
DLT
DLT

5 GB
48 GB
6 GB
20 GB
20 GB

500 KB/s
500 KB/s
800 KB/s
800 KB/s
800 KB/s

5 MB/s
5 MB/s
5 MB/s
5 MB/s
5 MB/s

Class A
Class A
Class A
Class A
Class A

4-Inch SBB—Half-Height Devices
Device

Tape Type

Capacity

Data Transfer

SCSI Transfer

FCC

SWXTE–AA
SWXTE–AB†
SWXTE–AC‡
TZ30–VE‡
TZK10–VA
TZK10–VU†
TZK11–VA
TZK11–VE‡
TZK11–VU†

Helical Scan
Helical Scan
Helical Scan
DLT
QIC
QIC
QIC
QIC
QIC

10 GB
10 GB
10 GB
95 MB
525 MB
525 MB
2 GB
2 GB
2 GB

1 MB/s
1 MB/s
1 MB/s
62.5 KB/s
200 KB/s
200 KB/s
300 KB/s
300 KB/s
300 KB/s

5 MB/s
5 MB/s
5 MB/s
5 MB/s
3 MB/s
3 MB/s
3 MB/s
3 MB/s
3 MB/s

Class A
Class A
Class A
Class A
Class A
Class A
Class B
Class A
Class A

† Second device; does not include SBB.
‡ Only used with desktop expansion unit.
†† Cartridge tape drive loader, capacity of 1–12 cartridges.

2.8 CD–ROMs
Table 2–5 describes the Digital StorageWorks CD–ROM drives.
CAUTION
Do not operate CD–ROM drives in the inverted position or the media may
be damaged.

2–6 StorageWorks Storage Devices

Table 2–5 StorageWorks CD–ROM Drives
5¼-Inch SBB—Half-Height Devices
Device

Capacity

Format

Data Transfer

SCSI Transfer

FCC

RRD42–VB
RRD42–VE‡
RRD42–VU†

600 MB
600 MB
600 MB

CD–ROM standard
CD–ROM standard
CD–ROM standard

150 KB/s
150 KB/s
150 KB/s

10 MB/s
5 MB/s
10 MB/s

Class B
Class A
Class A

RRD43–AA
RRD43–VC††
RRD43–VE‡
RRD43–VU†

600 MB
600 MB
600 MB
600 MB

CD–ROM standard
CD–ROM standard
CD–ROM standard
CD–ROM standard

150 KB/s
150 KB/s
150 KB/s
150 KB/s

10 MB/s
10 MB/s
5 MB/s
10 MB/s

Class B
Class A
Class A
Class B

RRD44–AA
RRD44–VE‡
RRD44–VU†

600 MB
600 MB
600 MB

CD–ROM standard
CD–ROM standard
CD–ROM standard

150 KB/s
150 KB/s
150 KB/s

10 MB/s
5 MB/s
10 MB/s

Class B
Class A
Class B

† Second device; does not include SBB.
‡ Only used with desktop expansion unit.
†† Three devices in single SBB. Only available as a factory-configured device. CANNOT be installed in the field.

2.9 Solid-State Disks
Table 2–6 describes the StorageWorks solid state disks.
Table 2–6 StorageWorks Solid State Disks (SSDs)
5¼-Inch SBB
Device

Sectors

Capacity

SCSI Transfer

FCC

EZ51R–VA
EZ54R–VA
EZ58R–VA

209 k blocks
835 k blocks
568 k blocks

107 MB
428 MB
856 MB

10 MB/s
10 MB/s
10 MB/s

Class B
Class B
Class A

2.10 Magazine Tape Subsystems
Both DIGITAL Linear Tape (DLT) half–rack magazine tape subsystems and
StorageWorks devices can be installed in either a StorageWorks SW500-series or
a SW800-series cabinet. Table 2–7 lists the Digital magazine tape subsystems.
Table 2–7 StorageWorks DLT Magazine Tape Subsystems

Device

Number of
Cartridges—Total
Capacity

Number of
Subsystems per
Cabinet

TZ867–VA

7—42 GB

TZ877–VA

7—140 GB

SW500—3
SW800—4
SW500—3
SW800—4

SCSI Transfer

FCC

5 MB/s

Class A

5 MB/s

Class A

These devices are always installed in the top of the cabinet and extend the full
depth of the cabinet. Installing one of these devices reduces the cabinet SBB

StorageWorks Storage Devices

2–7

shelf capacity by four shelves (two front; two rear). When the first device is
installed, you must also modify the cabinet door for access to tapes by ordering
and installing a tape loader door bezel (order number CK–SF400–TE).

2–8 StorageWorks Storage Devices

3
StorageWorks Shelves
The following basic StorageWorks shelf types are described in this chapter:
•

The StorageWorks building block (SBB) shelf in which 3½-inch and 5¼-inch
form factor storage devices, controllers, and adapters are installed

•

The controller shelf in which controllers and the associated cache memory are
installed

•

The special purpose controller and SBB shelf in which controllers, the
associated cache memory, and 3½-inch and 5¼-inch form factor storage
devices, controllers, and adapters are installed1

The BA350–SB2 is the basic StorageWorks shelf. It can have a maximum of two
buses—a four-device bus and a three-device bus. A single, seven-device bus can
be created using the bus jumper board supplied with each SBB shelf. A dual-bus
storage devices SCSI terminator board is furnished with each SBB shelf. Each
SBB shelf can accommodate a maximum of eight 3½-inch SBBs as shown in
Figure 3–1. The 3½-inch SBB shelf power supply is always installed in Slot 7.
The shelf can have a combination of 3½-inch and 5¼-inch, SBBs as shown in
Figure 3–2. Remember, a 5¼-inch SBB occupies three shelf slots. Table 3–1 lists
some of the possible configurations.
Figure 3–1 Typical SBB Shelf (3½-inch SBBs )

(7)
POWER

SCSI
CONNECTORS

CXO-3617B-PH

1
2

The BA350–EA controller and SBB shelf is used only in RAID Array Subsystems.
Direct replacement for the BA350–SA SBB shelf; it can be used in either an FCC Class
A or Class B environment.

StorageWorks Shelves

3–1

Figure 3–2 Typical SBB Shelf (3½-inch and 5¼-inch) SBBs

CXO-3608A-PH

Table 3–1 SBB Shelf Capacities
Storage SBBs
Power Supplies

3½-Inch SBBs

5¼-Inch SBBs

Total Storage Devices

5† or 6

3†, 4, 5

2† or 4

4† or 5

† No half-height 5¼-inch devices

In addition, you can connect multiple storage shelves in series (daisy-chaining)
provided you do not exceed the maximum SCSI bus length or the maximum of
seven devices per single bus.

3–2 StorageWorks Shelves

3.1 Shelves and Shelf Upgrade Kits
The following lists various kit options that you may wish to add to your current
configuration. See Table 3–2 for a complete description of the kits listed.
If you Wish to Add

Order

An SBB shelf to an SW500-series or SW800series cabinet

BA350–JA

An SBB shelf to an HSC-type cabinet (RETMA
mounting rails)

BA350–SB
BA35X–Hx power supply
BA35X–RB bracket kit

Two SBB shelves to an Alpha AXP DEC 7000 or
DEC 10000

BA655–AA

A controller shelf to an SW500-series or SW800series series cabinet

BA350–MB

Table 3–2 lists the basic StorageWorks shelves and the shelf upgrade kits. When
ordering shelves you must either order mounting brackets (see Chapter 6), and
power supplies, or order an upgrade kit.
Table 3–2 StorageWorks Shelves and Upgrade Kits
Order Number

Description
SBB Shelves

BA350–SB†

This basic, single-height SBB shelf can be configured for either one
or two SCSI–2 buses. Its maximum capacity is seven 3½-inch SBBs,
or two 5¼-inch SBBs and one 3½-inch SBB, and one power supply. A
redundant power supply (ac, dc, or BBU) can be installed in slot 6.

BA350–JA

An SW500-series and SW800-series cabinet compatible SBB shelf
upgrade kit containing the following:
1 BA350–SB SBB shelf with the following components:
2 BA35X–MA blowers
1 BA35X–MB terminator board
1 BA35X–MC jumper board
1 BA35X–RD metric mounting bracket kit
1 BA35X–HA ac input power supply

BA655–AA‡

A DEC 7000 or DEC 1000 AXP compatible upgrade kit containing the
following:
2 BA350–LA SBB shelves with the following components:
1 BA35X–MB terminator board
1 BA35X–MC jumper board
1 PIU mounting bracket kit
1 BA35X–HB dc input power supply (BA35X–HB)

† The BA350–SB shelf is FCC Class B certified and can be installed in either a Class A or Class B
environment. It is a direct replacement for the BA350–SA SBB shelf.
‡ The BA350–LA SBB shelf does not have any blowers. The system cabinet fans provide cooling.

StorageWorks Shelves

3–3

Controller Shelves
BA350–MA

This special purpose, single-height shelf has a maximum capacity
of two controllers, two cache memories, two power supplies, and six
SCSI–2 buses. Storage SBBs cannot be used in this shelf.

BA350–MB

An SW500-series and SW800-series cabinet compatible controller shelf
upgrade kit containing the following:
1 BA350–MA controller shelf with the following components:
2 BA35X–MA blowers
1 BA35X–MB terminator board
1 BA35X–MC jumper board
1 BA35X–RD metric mounting bracket kit
1 BA35X–HA ac input power supply
Controller and SBB Shelves

BA350–EA

This special purpose, double-height shelf is part of the StorageWorks
RAID Array Subsystem. It has a maximum capacity of two controllers,
two cache memories, and two power supplies in the controller portion of
the shelf. The SBB portion of the shelf has one power supply and up to
seven 3½-inch SBBs which can be storage devices, signal converters, or
a redundant power supply, in any combination. It has five SCSI buses
or channels.

3.2 Shelf Power Supplies
Each StorageWorks shelf requires an ac or dc input power supply. The power
supply type is determined by the internal enclosure power system, either ac or dc.
Any shelf can have a redundant power supply to preclude a single power supply
failure from disabling the shelf. In most cases, battery backup units (BBUs)
can be combined with the shelf power supply to provide extended system data
integrity. See Table 3–3 and the StorageWorks Solutions Shelf and SBB User’s
Guide for more information about the power supplies.
Table 3–3 contains the specifications for the BA35X–HA, the BA35X–HB, and the
BA35X–HC StorageWorks power supplies.
Table 3–3 StorageWorks Power Supplies
Specifications

BA35X–HA

BA35X–HB

BA35X–HC

Power supply type
Input voltage range
Nominal input voltage
Autoranging feature
Output voltages

AC input
90–264 V ac
110 V ac
Yes
12 V dc
5 V dc

DC input
36–72 V dc
48 V dc
Yes
12 V dc
5 V dc

Battery backup
N/A
12 V dc‡
No
12 V dc
5 V dc

‡ Charging voltage

(continued on next page)

3–4 StorageWorks Shelves

Table 3–3 (Cont.) StorageWorks Power Supplies
Specifications

BA35X–HA

BA35X–HB

BA35X–HC

Output power†

131 W

200 W peak power for 16, 32, or 64
seconds

† Sequential device spin-up at 4-second interval mandatory

3.3 Power Cords—Desktop and Deskside Expansion Units
The StorageWorks shelf power cords are enclosure-specific and are supplied with
the StorageWorks SW500-series and and SW800-series cabinets. The deskside
expansion unit and desktop expansion unit are different in that you must order a
country-specific 10 amp input power cord, as listed in Table 3–4.
Table 3–4 Country-Specific Power Cords
Country

Voltage

Plug

Meters (Feet)

Order No.

Australia
Central Europe
Denmark
Europe—Central
India
Ireland
Israel
Italy
Japan
New Zealand
South Africa
Switzerland
United Kingdom
United States

250 V ac
250 V ac
250 V ac
250 V ac
250 V ac
250 V ac
250 V ac
250 V ac
125 V ac
250 V ac
250 V ac
250 V ac
250 V ac
125 V ac

AS 3112 - 1981
CEE 7/7 (Schuko)
Afsnit 107
CEE 7/7 (Schuko)
BS 546
BS 1363
SI 32
CEI 213–16/VII
NEMA 5–15
AS 3112 - 1981
BS 546
SEV 1011
BS 1363
NEMA 5–15

2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
3.0 (9.8)
2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
2.5 (8.2)
3.0 (9.8)

BN19H–2E
BN19W–2E
BN19K–2E
BN19W–2E
BN19S–2E
BN19A–2E
BN18L–2E
BN19M–2E
BN27S–03†
BN19H–2E
BN19S–2E
BN19E–2E
BN19A–2E
BN27S–03†

† This power cord is rated at 15 amps.

StorageWorks Shelves

3–5

4
StorageWorks Controllers,
Converters, and Adapters
The StorageWorks controllers, converters, and adapters are the interface between
the host computer and the StorageWorks SCSI–2 devices. The controllers,
converters, and adapters are not interchangeable and can be user only with a
specific type host. For general information about these devices, see the following
sections in this chapter:
Model

Description

See

DWZZA–xx

A SCSI bus converter for connecting a 16-bit differential
SCSI host operating in the 8-bit mode to a StorageWorks
shelf operating the single-ended, 8-bit, SCSI–2 mode.

Section 4.5

HSD05™–AA

A storage array controller for connecting a DSSI
(DIGITAL standard system interconnect) host to
a StorageWorks shelf SCSI bus.

Section 4.3

HSJ™40–AD

A CI™ (computer interface) compatible SCSI controller
that supports up to 36 SCSI–2 disks, tapes, or optical
devices. This controller includes a 16 MByte read cache
and supports RAID 0 (random array of independent disks,
level 0).

Section 4.1

HSJ42–AD

A CI (computer interface) compatible SCSI controller
with two HSJ40–AD controllers. It is used for redundant
systems.

Section 4.1

HSD30™–Ax

A controller for connecting an 8-bit wide DSSI host
computer to 3 SCSI–2 single-ended buses.

Section 4.4

HSS9X–Ax

The HSC controller seven device SCSI channel controller
(K.scsi) for use with the HSC95 or HSR95 controller. This
controller is part of the HSR95-series HSC rackmount
servers.

Section 4.7

HSZ™10–Ax
HSZ15–Ax

A RAID array subsystem SCSI controller that can support
up to 30 SCSI–2 devices on six SCSI buses or channels.
These subsystems (SZ200–Ax series) are installed in
deskside expansion units.

Section 4.6

HSZ40–Ax

A controller for connecting a wide (16-bit), differential
SCSI bus to narrow (8-bit), single-ended SCSI bus.
This controller requires using a DWZZA-series signal
converter.

Section 4.2

SWCDI–Ax

The InfoServer controller is a dedicated SCSI storage
server mounted in the upper half of a 5¼-inch SBB
(StorageWorks building block). It quickly and efficiently
transfers data between the StorageWorks SCSI devices
and remote network client systems.

Section 4.8

StorageWorks Controllers, Converters, and Adapters

4–1

4.1 HSJ-Series Controllers
The HSJ controller series (the HSJ40 [6 SCSI ports] and HSJ30 [3 SCSI ports]
controllers), shown in Figure 4–1, connect a CI bus to a SCSI bus. These
controllers, their cache memories, and the power supplies are mounted in a
BA350–MA controller shelf. The SBBs are mounted in SBB shelves. Both the
controller and the SBB shelves can be installed in either an SW500-series or
SW800-series cabinet.1 There is no provision for installing these controllers in a
deskside expansion unit.
CAUTION
Installing CD–ROM devices and other storage devices on the same
HSJ-series controller SCSI bus can cause time-out problems. Do not
install any other storage device on a SCSI bus with a CD–ROM when
using an HSJ-series controller.

Figure 4–1 Typical HSJ-Series Controller Shelf Installation

CXO-3660A-PH

4.2 HSZ40-Series SCSI Controllers
The HSZ40 SCSI disk controller is a member of the Digital HSZ family of storage
array controllers and is installed in BA350–Mx series controller shelf. The HSZ40
controller connects a 16-bit wide, differential host computer SCSI port to six 8-bit,
single-ended SCSI device ports. A DWZZA SCSI signal converter is required.
The HSZ40 controller can be connected to a Digital host SCSI ports when the host
is running Digital OSF/1® software. Support for non-Digital hosts is provided for
the original equipment manufacturer (OEM) environment.

SW500-series and SW800-series cabinets can be only installed in an FCC Class A
environment regardless of the SBB shelf type.

4–2 StorageWorks Controllers, Converters, and Adapters

4.3 HSD05 DSSI Storage Array Controller
The HSD05 array controller, shown in Figure 4–2, connects a DSSI host to a
StorageWorks SCSI bus. This 3½-inch SBB connects to the DSSI bus with a
50-pin micro-ribbon cable attached to the connector on the front. Switches on the
back of the SBB define the DSSI node identification (node ID), the SCSI ID,
and the DSSI bus termination. The DSSI trilink connector and DSSI terminator
block provided with each HSD05 array controller are used to either position the
controller in the mid-bus position, or to permit its removal without interrupting
the bus.
The HSD05 has two connectors: a 68-pin high-density DSSI connector to which
the DSSI cable is attached, and a 96-pin DIN connector that connects to the SBB
shelf backplane connector. The single-ended terminators are mounted internally
and the converter can be used in either the end-bus or mid-bus position with an
HSD trilink connector.
Figure 4–2 HSD05 DSSI Storage Array Controller

CXO-4052A-PH_R

The HSD05 storage array controller is connected to the host with one of the DSSI
cables listed in Chapter 14. The 96-pin connector connects the controller to the
8-bit wide, single-ended SBB shelf SCSI bus.

4.4 HSD30 Array Controller
The HSD30 array controller can be configured either as a single controller, or
with another HSD30 in a dual-redundant configuration (failover support). The
HSD30 has three SCSI–2 device ports.
•

In the dual-redundant configuration, each port can support six devices.

•

In the single controller configuration, each port can support seven devices.

StorageWorks Controllers, Converters, and Adapters

4–3

4.5 SCSI Bus Signal Converters
The SBB shelf SCSI buses are 8-bit, single-ended, SCSI–2 buses. Some
controllers and hosts, or their SCSI adapters, use a 16-bit, differential SCSI
bus. Singled-ended and differential buses are incompatible and the SCSI protocol
will disable both buses when they are connected together.
As shown in Figure 4–3, SCSI bus signal converters permit connecting singleended and differential buses together without modifying the SCSI devices. For
an SBB shelf, the DWZZA-series SCSI bus signal converters are used perform the
following:
•

Establish compatibility between the host SCSI bus and the SBB bus

•

Extend the length of the SCSI bus

Two SCSI bus signal converters are used with StorageWorks products—the
DWZZA–Ax and the DWZZA–VA. Electrically and operationally, these models are
identical. The primary differences are as follow:
•

The DWZZA–Ax is a desktop model with a self-contained power supply
that can be connected to an SBB shelf or a DWZZA–VA converter. The
DWZZA–Ax has two female cable connectors—a 68-pin, high-density and a
50-pin, low-density.

•

The DWZZA–VA is always installed in slot 0 of an SBB shelf. It has a single
female cable connector—a 68-pin, high-density.
Note
The DWZZA–VA input connector is a 68-pin, differential connector. There
is no provision for connecting a 50-pin, single-ended connector to the
DWZZA–VA.

Both the DWZZA–Ax and DWZZA–VA models have internal differential SCSI
and single-ended SCSI terminators. These converters can be installed in either
the end-bus or the mid-bus position. The mid-bus position requires using the
H885–Ax trilink connector block.
The primary differences between the –Ax and the –VA convertors exist in
the enclosures (the –VA is mounted in a 3½-inch SBB; the –Ax is mounted
in a desktop enclosure) and the connectors. All of the cable connectors are
high-density (HD). Table 4–1 describes the major differences between these
converters.
Table 4–1 StorageWorks SCSI Bus Converters Description
Connectors
Converter Type
DWZZA–Ax
DWZZA–VA

68-pin HD

50-pin HD

96-pin DIN

1
1

1
0

0
1

4–4 StorageWorks Controllers, Converters, and Adapters

DC Power Source
Internal
SBB shelf

Figure 4–3 Typical Host–SBB Shelf SCSI Bus Cabling

SINGLEENDED
SCSI
CONTROLLER

SBB
SHELF

SINGLEENDED
CABLE

JA-1

DIFFERENTIAL
SCSI
CONTROLLER

SBB
SHELF
DWZZA-VA
DIFFERENTIAL
CABLE
SLOT 0

SINGLEENDED
SCSI
CONTROLLER

SBB
SHELF
DWZZA-VA

DWZZA-AA
SINGLEENDED
CABLE

DIFFERENTIAL
CABLE
SLOT 0
CXO-3837A-MC

StorageWorks Controllers, Converters, and Adapters

4–5

4.6 HSZ1x-Series Disk Array Controllers
The HSZ1x-series SCSI disk array controller supports RAID levels 0, 1, 3, and
5. The controller is only used with RAID array subsystems and is mounted in
a controller and SBB shelf. This shelf has 5 SCSI buses, or channels, with one
3½-inch per bus (a one rank\ BOLD)2 bus) that can be expanded by adding SBB
shelves and 3½-inch SBBs up to a maximum of 30 SBBs (5 buses of 6 SBBs each,
a 5x6 configuration). All the StorageWorks RAID Array Subsystem shelves are
installed in deskside expansion units. The controller and SBB shelf is mounted
in two deskside expansion units, as shown in Figure 4–4.
The host SCSI channel is a synchronous/asynchronous, 10 MB/s (fast), 8-bit/16-bit
differential channel, and supports the SCSI–2 protocol. The host connector is a
68-pin, high-density, female connector. The second connector is a SCSI output
connector for connecting another controller or shelf in series.
There are five 8-bit, single-ended, synchronous/asynchronous, SCSI–2 channels
or interfaces. The controller provides active SCSI termination and terminator
power. For additional details, see the StorageWorks RAID Array 110 Subsystem
User’s Guide.
Figure 4–4 Typical StorageWorks RAID Array Subsystem Expansion Unit

HSZ10-AA
Controller
BA350-EA
Shelf
Disk Drive
SBB
Drive LEDs

BA35X Vertical
Mounting Kit

Power SBBs

SHR-XR3001-VIF

A rank is the number of SBB devices in a RAID set.

4–6 StorageWorks Controllers, Converters, and Adapters

4.7 HSC Controller SCSI Channel Card
The HSC controller SCSI channel card HSS9X–Ax, shown in Figure 4–5
(commonly referred to as ‘‘K.scsi’’) expands the capabilities of the HSC-series
controllers3 to include SCSI devices. These controllers can operate with either
a single-ended host or a differential host operating in the 8-bit mode and can
be installed in either an HSC controller cabinet, such as the HSC95™ or in an
HSR95-series data center cabinet.
Figure 4–5 HSS9X–Ax ‘‘K.scsi’’ Controller Card

CXO-4202A-PH

Bus control is provided by the host adapter. The HSC-series controller uses
OpenVMS preferred pathing for dual pathing so two controllers can share the
SCSI bus and control a maximum of six SCSI devices. Only one adapter has
access at a time. In the event of a problem that does not involve the SCSI bus,
the other controller can assume control of the devices.

Except for the HSC50™ controller

StorageWorks Controllers, Converters, and Adapters

4–7

4.8 InfoServer Controller
The InfoServer SW1000 controller SWDCI–AA, shown in Figure 4–6, is
an inexpensive means of connecting a remote network client system to a
StorageWorks SCSI bus. The SWDCI–AA is always installed in the upper half of
a 5¼-inch SBB. The client system is connected to the SBB front panel connector
with a thin-wire Ethernet cable. The SBB is always mounted in the the first
three SBB shelf slots (slots 0, 1, and 2). The InfoServer SW1000 connector mates
with the SBB shelf backplane connector in slot 0. The InfoServer SW1000 SBB
device address switch is set to 7, the host controller address, thereby overriding
the SBB backplane connector address.
A half-height storage device, such as a CD–ROM, can be mounted in the lower
portion of the SBB and its connector mates with SBB shelf backplane connector
in slot 2. This device also has a SCSI device address switch.
Figure 4–6 InfoServer Controller SWDCI–AA

CXO-4142A-PH

4–8 StorageWorks Controllers, Converters, and Adapters

5
StorageWorks Enclosures and Subsystems
The following StorageWorks enclosures are described in this chapter:
•

SW800-series data center cabinets and subsystems (see Section 5.1)

•

SW500-series departmental servers and subsystems (see Section 5.2)

•

BA350–Kx-series deskside expansion units (see Section 5.3)

•

BA353–Ax-series desktop expansion units (see Section 5.4)

StorageWorks shelves can be mounted in a variety of Digital enclosures.
This chapter describes the various type enclosures, the configure-to-order
subsystems, and the factory-configured subsystems to include the following:

Dimensions
Input power
StorageWorks shelf capacity
Controllers provided or required
Type and quantity of StorageWorks shelves
AC power supplies
AC power cords
Storage devices
Cable distribution units

You can configure StorageWorks enclosures and subsystems in the following
ways:
Configure-to-Order Systems:
The customer–specified options are installed at the factory.
Factory-Configured Systems:
These systems are configured at the factory and shipped to the customer
‘‘as is.’’ Customer-specified options are shipped with the system for on-site
installation.
Field Configured Systems
Customer-specified options are installed on-site. The options can be ordered
at any time for field upgrades.

StorageWorks Enclosures and Subsystems

5–1

As shown in Table 5–1, the system configuration category is model dependent.
Unless specifically stated otherwise, all systems can be configured at the cusomter
site providing the proposed upgrade does not create any configuration conflicts
(see Part III, StorageWorks Subsystem Planning). For detailed information
about compatible upgrades and possible conflicts, contact your Digital account
representative.
Table 5–1 StorageWorks Enclosure System Configurations Categories
SW500-Series Departmental Cabinets
Configure-to-Order Systems
SW500–AC
SW500–AD

SW510–AC
SW510–AD

SW511–AC
SW511–AD

Factory-Configured Systems
SW512–AC
SW512–AD

SW510–BC
SW510–BD

SW510–CC
SW510–CD

SW512–BC
SW512–BD

SW512–CC
SW512–CD

SW800-Series Data Center Cabinets
Configure-to-Order Systems
SW800–AA
SW800–AB

SW810–AA
SW810–AB

SW811–AA
SW811–AB

Factory-Configured Systems
SW812–AA
SW812–AB

SW810–BA
SW810–BB

SW810–CA
SW810–CB

SW812–BA
SW812–BB

SW812–CA
SW812–CB

Deskside Expansion Units
Configure-to-Order Systems

Factory-Configured Systems

BA350–KB

BA350–KC

BA350–KE

Desktop Expansion Units
Configure-to-Order Systems
BA353–AA
BA353–AD

BA353–AE
BA353–AF

BA353–AH
BA353–AJ

Factory-Configured Systems
BA353–AP

5–2 StorageWorks Enclosures and Subsystems

5.1 SW800 Data Center Cabinet Subsystems
Tables 5–2 and 5–3 describe SW800 data center cabinets and subsystems
configurations similar to the one shown in Figure 5–1.
Figure 5–1 Typical SW800 Data Center Cabinet

CXO-4199A-PH

StorageWorks Enclosures and Subsystems

5–3

Table 5–2 SW800-Series Data Center Cabinets—Configure-to-Order Subsystems
Note
The second letter in the model-suffix denotes the cabinet input ac power as
follows:
xA—60 Hz, 120/208 V ac, three-phase
xB—50 Hz, 240/416 V ac, three-phase
Enclosure

Description

SW800–AA
SW800–AB

SW800 Data Center Cabinet
No controller shelves or controllers
No SBB shelves or storage devices
A 1700 mm (66.9 in) high, configure-to-order SW800 cabinet available in either 60 Hz,
120/208 V ac, three-phase configuration (–AA) or 50 Hz, 240/416 V ac, three-phase
configuration (–AB).
This cabinet includes the following components:

Outer panels
 Blank doors
 Power entry units
 Internal power cords
 Cooling systems
It does not include:

Shelf mounting hardware
 SCSI cables
 StorageWorks components
 Storage devices
It can accommodate a maximum of 24 StorageWorks shelves.
SW810–AA
SW810–AB

SW810 Data Center Subsystem
Controller shelf without a controller
6.3 GB disk storage
Customer-specified options can be installed at the factory or on site.
This configure-to-order SW800 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 BA35X–HA ac power supply
1 ac power cord
3 BA350–SB SBB shelves with:
6 RZ26L–VA 3½-inch disk drives (2 per shelf)
6 BN21H–01 SCSI cables (2 per shelf)
3 BA35X–HA ac power supplies (1 per shelf)
3 ac power cords (1 per shelf)
(continued on next page)

5–4 StorageWorks Enclosures and Subsystems

Table 5–2 (Cont.) SW800-Series Data Center Cabinets—Configure-to-Order Subsystems
Enclosure

Description

SW811–AA
SW811–AB

SW811 Data Center Subsystem
Controller shelf without a controller
21 GB disk storage
Customer-specified options can be installed at the factory or on site.
This configure-to-order SW800 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 BA35X–HA ac power supply
1 ac power cord
6 BA350–SB SBB shelves with:
6 RZ74–VA 5¼-inch disk drives (1 per shelf)
6 BN21H–01 SCSI cables (1 per shelf)
6 BA35X–HA ac power supplies (1 per shelf)
6 ac power cords (1 per shelf)

SW812–AA
SW812–AB

SW812 Data Center Subsystem
Controller shelf without a controller
12.6 GB disk storage
Customer-specified options can be installed at the factory or on site.
This configure-to-order SW800 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 BA35X–HA ac power supply
1 ac power cord
3 BA350–SB SBB shelves with:
6 RZ28–VA 3½-inch disk drives (2 per shelf)
6 BN21H–01 SCSI cables (2 per shelf)
3 BA35X–HA ac power supplies (1 per shelf)
3 ac power cords (1 per shelf)

StorageWorks Enclosures and Subsystems

5–5

Table 5–3 SW800-Series Data Center Cabinets—Factory-Configured Subsystems
Note
The second letter in the suffix denotes the cabinet or tape drive input ac
power as follows:
xA—60 Hz, 120/208 V ac, three-phase
xB—50 Hz, 240/416 V ac, three-phase
xE—60 Hz, 120 V ac, single-phase
xF—50 Hz, 240 V ac, single-phase
Enclosure

Description

SW810–BA
SW810–BB

Data Center Subsystem
HSJ42–AD Controller
18.9 GB Disk Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW800 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 HSJ42–AD controller
2 BA35X–HA ac power supply
2 ac power cord
6 BA350–SB SBB shelves with:
18 RZ26L–VA 3½-inch disk drives (3 per shelf)
6 BN21H–01 SCSI cables (1 per shelf)
12 BA35X–HA ac power supplies (2 per shelf)
12 ac power cord (2 per shelf)
2 cable distribution units with:
10 ac power cords (future expansion)

SW810–CA
SW810–CB

SW810 Data Center Subsystem
HSJ42–AD Controller
18.9 GB Disk Storage
42 GB Tape Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW800 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 HSJ42–AD controller
2 BA35X–HA ac power supply
2 ac power cord
5 BA350–SB SBB shelves with:
18 RZ26L–VA 3½-inch disk drives (3 shelves: 4 drives each;
2 shelves: 3 drives each)
5 BN21H–01 SCSI cables (1 per shelf)
10 BA35X–HA ac power supplies (2 per shelf)
10 ac power cord (2 per shelf)
1 TZ867–AE/AF Tape Drive Loader with:
1 CK–SF400–TE Tape Drive Door Bezel Kit
1 ac power cord
2 BN21H–02 SCSI cable
2 cable distribution units with:
12 ac power cords (future expansion)
(continued on next page)

5–6 StorageWorks Enclosures and Subsystems

Table 5–3 (Cont.) SW800-Series Data Center Cabinets—Factory-Configured Subsystems
Enclosure

Description

SW812–BA
SW812–BB

SW812 Data Center Subsystem
HSJ42–AD Controller
37.8 GB Disk Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW800 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 HSJ42–AD controller
2 BA35X–HA ac power supply
2 ac power cord
6 BA350–SB SBB shelves with:
18 RZ28B–VA 3½-inch disk drives (3 per shelf)
6 BN21H–01 SCSI cables (1 per shelf)
12 BA35X–HA ac power supplies (2 per shelf)
12 ac power cords (2 per shelf)
2 cable distribution units with:
10 ac power cords (future expansion)

SW812–CA
SW812–CB

SW812 Data Center Subsystem
HSJ42–AD Controller
37.8 GB Disk Storage
42 GB Tape Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW800 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 HSJ42–AD controller
2 BA35X–HA ac power supply
2 ac power cord
5 BA350–SB SBB shelves with:
18 RZ28B–VA 3½-inch disk drives (3 shelves: 4 drives each;
2 shelves: 3 drives each)
5 BN21H–01 SCSI cables (1 per shelf)
10 BA35X–HA ac power supplies (2 per shelf)
10 ac power cords (2 per shelf)
1 TZ867–AE/AF Tape Drive Loader with:
1 CK–SF400–TE Tape Drive Door Bezel Kit
1 ac power cord
2 BN21H–02 SCSI cable
2 cable distribution units with:
10 ac power cords (future expansion)

StorageWorks Enclosures and Subsystems

5–7

5.2 SW500 Departmental Server Subsystems
Tables 5–4 and 5–5 describe the SW500 departmental server subsystems cabinets
and subsystems similar to the one shown in Figure 5–2 configurations.
Figure 5–2 Typical SW500 Departmental Server

CXO-4200A-PH

5–8 StorageWorks Enclosures and Subsystems

Table 5–4 SW500-Series Departmental Cabinets—Configure-to-Order Subsystems
Note
The second letter in the model-suffix denotes the cabinet input ac power as
follows:
xA—60 Hz, 120 V ac, single-phase
xB—50 Hz, 240 V ac, single-phase
Enclosure

Description

SW500–AC
SW500–AD

SW500 Departmental Server Subsystem
No controller shelves or controllers
No SBB shelves or storage devices
An 1100 mm (42.1 in) high, configure-to-order SW500 cabinet available in either 60 HZ,
120 V ac, single-phase configuration (–AC) or 50 Hz, 240 V ac, single-phase configuration
(–AD).
This cabinet includes the following components:

Outer panels
 Blank doors
 Power entry units
 Internal power cords
 Cooling systems
It does not include:

Shelf mounting hardware
 SCSI cables
 StorageWorks components
 Storage devices
It can accommodate a maximum of 10 StorageWorks shelves.
SW510–AC
SW510–AD

SW500 Departmental Server Subsystem
No Controller
6.3 GB Disk Storage
Customer-specified options can be installed at the factory or on site.
This configure-to-order SW500 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 BA35X–HA ac power supply
1 ac power cord
3 BA350–SB SBB shelves with:
6 RZ26L–VA 3½-inch disk drives (2 per shelf)
6 BN21H–01 SCSI cables (2 per shelf)
3 BA35X–HA ac power supplies (1 per shelf)
3 ac power cords (1 per shelf)
(continued on next page)

StorageWorks Enclosures and Subsystems

5–9

Table 5–4 (Cont.) SW500-Series Departmental Cabinets—Configure-to-Order Subsystems
Enclosure

Description

SW511–AC
SW511–AD

SW500 Departmental Server Subsystem
No Controller
21 GB Disk Storage
Customer-specified options can be installed at the factory or on site.
This configure-to-order SW500 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 BA35X–HA ac power supply
1 ac power cord
6 BA350–SB SBB shelves with:
6 RZ74–VA 5¼-inch disk drives (1 per shelf)
6 BN21H–01 SCSI cables (1 per shelf)
6 BA35X–HA ac power supplies (1 per shelf)
6 ac power cords (1 per shelf)

SW512–AC
SW512–AD

SW500 Departmental Server Subsystem
No Controller
12.6 GB Disk Storage
Customer-specified options can be installed at the factory or on site.
This configure-to-order SW500 subsystem contains the following components:
1 BA350–MA controller shelf with:
1 BA35X–HA ac power supply
1 ac power cord
3 BA350–SB SBB shelves with:
6 RZ28–VA 3½-inch disk drives (2 per shelf)
6 BN21H–01 SCSI cables (2 per shelf)
3 BA35X–HA ac power supplies (1 per shelf)
3 ac power cords (1 per shelf)

5–10 StorageWorks Enclosures and Subsystems

Table 5–5 SW500-Series Departmental Cabinets—Factory-Configured Subsystems
Note
The second letter in the model-suffix denotes the cabinet input ac power as
follows:
xA—60 Hz, 120 V ac, single-phase
xB—50 Hz, 240 V ac, single-phase
Enclosure

Description

SW510–BC
SW510–BD

SW500 Departmental Server Subsystem
HSJ40–AD Controller
6.3 GB Disk Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW500 subsystem containing the following components:
1 BA350–MA controller shelf with:
1 HSJ40–AD controller
1 BA35X–HA ac power supply
1 ac power cord
3 BA350–SB SBB shelves with:
6 RZ26L–VA 3½-inch disk drives (2 per shelf)
6 BN21H–01 SCSI cables (2 per shelf)
3 BA35X–HA ac power supplies (1 per shelf)
3 ac power cord (1 per shelf)
1 cable distribution unit with:
6 ac power cords (future expansion)

SW510–CC
SW510–CD

SW500 Departmental Server Subsystem
HSJ40–AD Controller
6.3 GB Disk Storage
42 GB Tape Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW500 subsystem containing the following components:
1 BA350–MA controller shelf with:
1 HSJ40–AD controller
1 BA35X–HA ac power supply
1 ac power cord
6 BA350–SB SBB shelves with:
6 RZ26L–VA 3½-inch disk drives (1 per shelf)
6 BN21H–01 SCSI cables (1 per shelf)
6 BA35X–HA ac power supplies (1 per shelf)
6 ac power cord (1 per shelf)
1 TZ867–AE/AF Tape Drive Loader with:
1 CK–SF400–TE Tape Drive Door Bezel Kit
1 ac power cord
1 BN21H–02 SCSI cable
1 cable distribution unit with:
2 ac power cords (future expansion)
(continued on next page)

StorageWorks Enclosures and Subsystems

5–11

Table 5–5 (Cont.) SW500-Series Departmental Cabinets—Factory-Configured Subsystems
Enclosure

Description

SW512–BC
SW512–BD

SW500 Departmental Server Subsystem
HSJ40–AD Controller
12.6 GB Disk Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW500 subsystem containing the following components:
1 BA350–MA controller shelf with:
1 HSJ40–AD controller
1 BA35X–HA ac power supply
1 ac power cord
6 BA350–SB SBB shelves with:
6 RZ26L–VA 3½-inch disk drives (1 per shelf)
6 BN21H–01 SCSI cables (1 per shelf)
6 BA35X–HA ac power supplies (1 per shelf)
6 ac power cords (1 per shelf)
1 cable distribution unit with:
3 ac power cords (future expansion)

SW512–CC
SW512–CD

SW500 Departmental Server Subsystem
HSJ40–AD Controller
12.6 GB Disk Storage
42 GB Tape Storage
This factory-configured subsystem is shipped with only the listed components installed prior
to shipment. Customer-specified options are installed on site.
A factory-configured SW500 subsystem containing the following components:
1 BA350–MA controller shelf with:
1 HSJ40–AD controller
1 BA35X–HA ac power supply
1 ac power cord
6 BA350–SB SBB shelves with:
6 RZ26L–VA 3½-inch disk drives (1 per shelf)
6 BN21H–01 SCSI cables (1 per shelf)
6 BA35X–HA ac power supplies (1 per shelf)
6 ac power cords (1 per shelf)
1 TZ867–AE/AF Tape Drive Loader with:
1 CK–SF400–TE Tape Drive Door Bezel Kit
1 ac power cord
1 BN21H–02 SCSI cable
1 cable distribution unit with:
2 ac power cords (future expansion)

5–12 StorageWorks Enclosures and Subsystems

5.3 BA350–Kx Series Deskside Expansion Units
Table 5–6 describes the BA350–Kx series deskside expansion units and
subsystems configurations similar to the one shown in Figure 5–3.
Figure 5–3 RAID Array Subsystem Dual BA350–KB Deskside Expansion Unit

SHR-XR3000-VIF

Table 5–6 Deskside Expansion Units
Enclosure

Description

BA350–KB

Deskside Expansion Unit
No controller
No storage devices
This configure-to-order deskside expansion unit is certified for operation in an FCC Class B
environment when all the installed storage devices are also Class B certified. It can also be
used in an FCC Class A environment with any approved storage device installed.
Customer-specified options can be installed either at the factory or on site.
1 BA35X–VA Pedestal Mounting Kit with the following components:
1 ac distribution unit
2 ac power cords (internal)
1 BA350–SB SBB shelf with the following components:
1 BA35X–HA ac input power supply
1 ac power cord
(continued on next page)

StorageWorks Enclosures and Subsystems

5–13

Table 5–6 (Cont.) Deskside Expansion Units
Enclosure

Description

BA350–KC

BA350 Deskside Expansion Unit
HSD05 DSSI Controller
3.15 GB Disk Storage
This factory-configured deskside expansion unit is certified for operation in an FCC Class B
environment when all the installed storage devices are also Class B certified. It can also be
used in an FCC Class A environment with any approved storage device installed.
Customer-specified options are installed on site.
1 BA35X–VA Pedestal Mounting Kit with the following components:
1 ac distribution unit
2 ac power cords (internal)
1 BA350–SB SBB shelf with the following components:
1 HSD05–AA DSSI Controller
3 RZ26L–VA 3½-inch disk drives
1 BA35X–HA ac input power supply
1 ac power cord

BA350–KE

BA350 Deskside Expansion Unit
HSD05 DSSI Controller
6.3 GB Disk Storage
This factory-configured deskside expansion unit is certified for operation in an FCC Class B
environment when all the installed storage devices are also Class B certified. It can also be
used in an FCC Class A environment with any approved storage device installed.
Customer-specified options are installed on site.
1 BA35X–VA Pedestal Mounting Kit with the following components:
1 ac distribution unit
2 ac power cords (internal)
1 BA350–SB SBB shelf with the following components:
1 HSD05–AA DSSI Controller
3 RZ28B–VA 3½-inch disk drives
1 BA35X–HA ac input power supply
1 ac power cord

5–14 StorageWorks Enclosures and Subsystems

5.4 BA353-Ax Series Desktop Expansion Unit
Table 5–7 describes the BA353-Ax desktop expansion unit and subsystem
configurations similar to the one shown in Figure 5–4.
Figure 5–4 Typical BA353-Ax Deskside Expansion Unit

CXO-3679A_PH

Table 5–7 Desktop Expansion Units
Enclosure

Description

BA353–AA

Desktop Expansion Unit
No storage devices
A configure-to-order desktop expansion unit with the following:
1 universal ac input power supply
1 internal blower
1 one 5¼-inch half-height or 3½-inch SBB slot
2 3½-inch SBB slots

BA353–AE

Desktop Expansion Unit
600 MB CD–ROM
A factory-configured desktop expansion unit with the following:
1 universal ac input power supply
1 internal blower
1 RRD43–VE CD–ROM
2 3½-inch SBB slots
(continued on next page)

StorageWorks Enclosures and Subsystems

5–15

Table 5–7 (Cont.) Desktop Expansion Units
Enclosure

Description

BA353–AF

Desktop Expansion Unit
600 MB CD–ROM
A factory-configured desktop expansion unit with the following:
1 universal ac input power supply
1 internal blower
1 RRD42–VE CD–ROM
2 3½-inch SBB slots

BA353–AH

Desktop Expansion Unit
95 MB Tape Drive
A factory-configured desktop expansion unit with the following:
1 universal ac input power supply
1 internal blower
1 TZ30–VE cartridge tape drive
2 3½-inch SBB slots

BA353–AJ

Desktop Expansion Unit
2 GB Tape Drive
A factory-configured desktop expansion unit with the following:
1 universal ac input power supply
1 internal blower
1 TZK11–VE cartridge tape drive
2 3½-inch SBB slots

BA353–AP

Desktop Expansion Unit
10 GB Tape Drive
A factory-configured desktop expansion unit with the following:
1 universal ac input power supply
1 internal blower
1 SWXTE–VE cartridge tape drive
2 3½-inch SBB slots

5–16 StorageWorks Enclosures and Subsystems

6
StorageWorks Accessories
The StorageWorks accessories listed in Table 6–1 expand the capabilities of
a StorageWorks system. Most of the accessories are included in the basic
StorageWorks subsystems.
Table 6–1 StorageWorks Accessories, Kits, and Components
Order No.

Description
Shelf Accessories

BA35X–PA

Filler panel kit consisting of six 3½-inch bezels for covering blank slots.

BA35X–MA

Blower assembly for StorageWorks shelf.

BA35X–MB

An active terminator board for two 8-bit single-ended SCSI–2 buses.

BA35X–MC

A jumper board for two 8-bit single-ended SCSI–2 buses.

BA35X–RB

Radio-Electronics-Television Manufacturer’s Association (RETMA) rack
mounting kit for mounting StorageWorks shelves in cabinets with the
RETMA mounting pattern, such as HSC controller cabinets. One kit is
required for each StorageWorks shelf ordered separately.

BA35X–RC

Metric rack mounting kit for mounting StorageWorks shelves in
HSR95-series cabinets. One kit is required for each StorageWorks
shelf ordered separately.

BA35X–RD

Metric rack mounting kit for mounting StorageWorks shelves in an
SW500-series or SW800-series cabinet. One kit is required for each
StorageWorks shelf ordered separately. These brackets are part of the
BA350–JA SBB shelf upgrade kit.
Cabinet Accessories

SW8xP–AA†

60 Hz, 120/208 V ac, three-phase cable distribution unit kit.
Required when more than 12 StorageWorks shelves installed in cabinet.

SW8xP–AB†

50 Hz, 240/416 V ac, three-phase cable distribution unit kit.
Required when more than 12 StorageWorks shelves installed in cabinet.

† Cable distribution units are installed by Digital Multivendor Customer Services engineers.

(continued on next page)

StorageWorks Accessories

6–1

Table 6–1 (Cont.) StorageWorks Accessories, Kits, and Components
Order No.

Description
Cabinet Accessories

SWX01–AA

This external SCSI storage kit for DEC 7000 AXP or DEC 10000
AXP systems is mounted in an SW800 cabinet. This kit contains the
following items:
1 BA350–JA SW500/SW800 data cabinet SBB shelf kit
1 DWZZA–VA SBB SCSI signal converter
1 DWZZA–AA desktop SCSI signal converter
1 BN21H–02 SCSI single-ended cable
1 BN21K–10 SCSI differential cable

HSS9X–RA

This HSC-compatible external SCSI storage kit is mounted in an
SW800 cabinet. This kit contains the following items:
1 HSC9X–SX SCSI data channel card
1 BA350–JA SW500/SW800 data cabinet SBB shelf kit
1 DWZZA–VA SBB SCSI signal converter
1 BN21K–10 SCSI differential cable

SW500- and SW800-Series Cabinet Magazine Tape Door Bezel
CK–SF400–TE

TZ8x7–VA Tape Loader Door Bezel
This door bezel is required to provide clearance for two TZ8xxx–VA
tape drive subsystems.
Order one kit for every two tape drive subsystems.
Storage Device Accessories and Kits

SWDDB–BA

Twelve 1.05 GB RZ26–VA 3½-inch disk drives in a single shipping
container.
StorageWorks Generic Device Carrier Kits

SWXBA–BA

3½-Inch Fixed Media SBB Kit
A device carrier kit for mounting customer–supplied 3½-inch form
factor fixed media devices. This kit contains the following items:

Integrated EMI/RFI/ESD shield
 Universal SCSI interface and power connector
 SCSI device address selection switch
 Bezel mounted green device status LED
 Bezel mounted amber device activity LED
 Mounting hardware
 Installation guide
(continued on next page)

6–2 StorageWorks Accessories

Table 6–1 (Cont.) StorageWorks Accessories, Kits, and Components
Order No.

Description
StorageWorks Generic Device Carrier Kits

SWXBA–BB

3½-Inch Removable Media SBB Kit
A device carrier kit for mounting customer–supplied 3½-inch form
factor removable media devices. This kit contains the following items:

Integrated EMI/RFI/ESD shield
 Universal SCSI interface and power connector
 SCSI device address selection switch
 Bezel
 Mounting hardware
 Installation guide
SWXBB–BA

5¼-Inch Fixed or Removable Media SBB Kit
A device carrier kit for mounting either full-height or half-height
customer–supplied 5¼-inch form factor fixed and removable media
devices. This kit contains the following items:

Integrated EMI/RFI/ESD shield
 Universal SCSI interface and power connector
 SCSI device address selection switch
 Bezels for both fixed and removable media devices
 Bezel mounted green device status LED—fixed media device
 Bezel mounted amber device activity LED—fixed media device
 Half-height device bezel panel
 Half-height device mounting bracket
 Mounting hardware
 Bezel extraction tool
 Installation guide

Differential SCSI Bus Accessories
H885–AA

H879–AA

A 68-pin, differential SCSI bus, trilink connector block used in
conjunction with a differential terminator block to accomplish the
following:
•

Removing a controller or bus converter without interrupting the
bus

•

Placing a controller or bus converter in the mid-bus position

A 68-pin, differential SCSI, terminator block used in conjunction with
the SCSI trilink connector block to permit removal of controller without
interrupting the bus.

StorageWorks Accessories

6–3

Part II
Digital StorageWorks Compatible Systems
This part contains descriptions of the StorageWorks compatible Digital systems
to include models, SCSI (small computer system interface) controllers/adapters,
SCSI bus type, SCSI cables, and the StorageWorks enclosures, shelves, and
devices. These descriptions are organized as follows:
For Information About

See

Alpha AXP Systems

Chapter 7, Alpha AXP System StorageWorks Configurations

applicationDEC™ 400xMP Systems

Chapter 10, Personal Computer System StorageWorks
Configurations

DEC™ 2000 AXP Servers

Chapter 7, Alpha AXP System StorageWorks Configurations

DEC 3000 AXP Systems

Chapter 7, Alpha AXP System StorageWorks Configurations

DEC 4000 Model 600/700 AXP
Distributed/Departmental Servers

Chapter 7, Alpha AXP System StorageWorks Configurations

DEC 7000 Model 600 AXP
Data Center Servers

Chapter 7, Alpha AXP System StorageWorks Configurations

DEC 10000 Model 600 AXP
Mainframe Class Servers

Chapter 7, Alpha AXP System StorageWorks Configurations

DECpc™ AXP 150 Deskside PC

Chapter 7, Alpha AXP System StorageWorks Configurations

DECstation™ 5000 Systems

Chapter 9, DECsystem StorageWorks Configurations

DECsystem™

Chapter 9, DECsystem StorageWorks Configurations

DECsystem 5000 Systems and Servers

Chapter 9, DECsystem StorageWorks Configurations

MicroVAX 3100™ Systems and Servers

Chapter 8, Digital VAX System StorageWorks Configurations

Personal Computers

Chapter 10, Personal Computer System StorageWorks
Configurations

VAX 4000™ Systems

Chapter 8, Digital VAX System StorageWorks Configurations

VAX 4000 Systems and Servers

Chapter 8, Digital VAX System StorageWorks Configurations

VAX 7000 Systems and Servers

Chapter 8, Digital VAX System StorageWorks Configurations

VAX 10000 Systems and Servers

Chapter 8, Digital VAX System StorageWorks Configurations

7
Alpha AXP System
StorageWorks Configurations
This chapter lists the basic data required for configuring Digital Alpha AXP
computer systems for operation with StorageWorks subsystems. A supported
system has been evaluated in the specified configuration (that is, the host
computer and SCSI adapter, and the StorageWorks controller, shelf, enclosure,
SCSI cable, and supported StorageWorks building blocks (SBBs) and complies
with country-specific standards (for example, FCC, TUV, and so forth) and Digital
standards.
Note
The information in this chapter is general in nature and is for guidance
only. See the Digital Systems and Options Catalog as well as Alpha
AXP system, controller, shelf, and enclosure publications for detailed
information about each element of the configuration. See Part III for
information about configuration rules and SCSI buses.

For Information About This System

See

DEC 2000 AXP Server

Table 7–3

DEC 3000™ AXP Desktop Workstations and Desktop Servers

Table 7–2

DEC 3000 AXP Deskside Workstations and Deskside Servers

Table 7–1

DEC 4000™ AXP Distributed/Departmental Servers

Table 7–5

DEC 7000™ AXP Data Centers Servers

Table 7–4

DEC 10000™ AXP Mainframe Class Servers

Table 7–6

DEC Personal Computer AXP

Table 7–7

Alpha AXP System StorageWorks Configurations

7–1

These tables include the following information:
Column

Information
Host System

Models

Self-explanatory

SCSI Adapter—
Model and
Speed

The host SCSI adapter, or controller, used with the StorageWorks shelves and
the adapter’s bus speed , either fast (10 MB/s) or slow (5 MB/s). Some systems
have an embedded SCSI adapter in the host that can be used both for the internal
and the external SCSI–2 buses. In many cases, the external SCSI bus requires
another adapter, such as the KZMSA–AB, for the SBB SCSI bus.
The rate at which the adapter can transmit data over the SCSI–2 bus, either
fast (10 MB/s) or slow (5 MB/s), is independent of the other elements in the
configuration. However, the devices on the bus, such as an RZ25–VA, may not be
able to process data at a fast rate. The adapter identifies the maximum rate at
which individual devices can process data and uses this rate for that device.

Note
When the adapter can transmit at the fast rate and there is at least
one fast device on the bus, the SCSI bus must be designed as a fast bus
(maximum length 3.0 meters [9.8 feet]). This bus cannot function as a
slow bus.

StorageWorks—
SCSI Cable
StorageWorks—
Component
StorageWorks—
Devices

The SCSI cable recommended for connecting the host system to the controller,
shelf, or enclosure. The cable length is a function of the physical configuration and
the bus speed. SCSI cables are described in detail in Chapter 12.
The information in this column defines the following:

The shelves used for the controllers or the SBBs
 The enclosures containing the shelves

The devices that are supported in a specific configuration. Other devices may be
compatible, but have not been evaluated in this configuration.

Note
Unless specifically stated otherwise, all buses are assumed to operate
as a single-ended, slow SCSI bus with a transfer rate of 5 MB/s and a
maximum cable length of 6.0 meters (19.7 feet).

7–2 Alpha AXP System StorageWorks Configurations

Table 7–1 DEC 3000 AXP Deskside StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

500 AXP
500S AXP

Embedded

Slow

BC09D–06†

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06

500 AXP
500S AXP
500X AXP

(BA350–Sx SBB shelf)

PMAZ–AA
PMAZ–AB

Slow
Fast

BN21H

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
SWXTE–VE
TLZ06
TZ30–VE
TZK11–VE

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06

(BA350–Sx SBB shelf)

BA353–Ax desktop expansion unit

†

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
SWXTE–VE
TLZ06
TZ30–VE
TZK11–VE

Minimum cable length.

Alpha AXP System StorageWorks Configurations

7–3

Table 7–2 DEC 3000 AXP Desktop StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

300 AXP
300L AXP

Embedded
PMAZ–AA
PMAZ–AB

Slow
Slow
Fast

BN21H

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

400 AXP
400S AXP

Embedded

Slow

BC09D–06†

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
TLZ06

400 AXP
400S AXP

†

(BA350–Sx SBB shelf)

PMAZ–AA
PMAZ–AB

Slow
Fast

BN21H

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06

(BA350–Sx SBB shelf)

Minimum cable length.

(continued on next page)

7–4 Alpha AXP System StorageWorks Configurations

Table 7–2 (Cont.) DEC 3000 AXP Desktop StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

400 AXP
400S AXP

PMAZ–AA
PMAZ–AB

Slow
Fast

BN21H

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

†

Minimum cable length.

Table 7–3 DEC 2000 AXP Server StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

300 AXP

PCTAZ–AB

Fast

BN21H

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TZK10

Alpha AXP System StorageWorks Configurations

7–5

Table 7–4 DEC 7000 AXP Data Center Servers StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

600

KZMSA–AB

Fast

BN21H

BA350–Kx deskside expansion unit

EZ51R
EZ54R
EZ58R
RRD42
RRD43
RRD44
RZ26
RZ26L
RZ28
RZ28B
RZ73
RZ74
TLZ06
TZ86
TZ87

(BA350–Sx SBB shelf)

BC10U

BA655–AA building block dual shelf
(BA350–LA SBB shelf)

BN21H–02
BN21K–10†

†

SW500 cabinet expansion unit
(BA350–JA SBB shelf kit)
 SW800 cabinet expansion unit
(BA350–JA SBB shelf kit)

Components required for DWZZA SCSI signal converter operations.

7–6 Alpha AXP System StorageWorks Configurations

EZ51R
EZ54R
EZ58R
RRD42
RRD43
RRD44
RZ26
RZ26L
RZ28
RZ28B
RZ73
RZ74
TKZ09
TLZ06

DWZZA–VA
DWZZA–AA
EZ51R
EZ54R
EZ58R
RRD42
RRD43
RRD44
RZ26
RZ26L
RZ28
RZ28B
RZ73
RZ74
TKZ09
TLZ06
TZ86
TZ87
TZ867
TZ877

Table 7–5 DEC 4000 AXP Servers StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

600

Embedded

Slow

BN21R

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ26
RZ26L
RZ28
RZ28B
RZ73
RZ74
TLZ06
TZ86
TZ87
TZ867
TZ877
TZK10
TZL6L

(BA350–Sx SBB shelf)

Alpha AXP System StorageWorks Configurations

7–7

Table 7–6 DEC 10000 AXP Mainframe Class Servers StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

600

KZMSA–AB

Fast

BN21H

BA350–Kx deskside expansion unit

EZ51R
EZ54R
EZ58R
RRD42
RRD43
RRD44
RZ26
RZ26L
RZ28
RZ28B
RZ73
RZ74
TLZ06
TZ86
TZ87

(BA350–Sx SBB shelf)

BC10U

BA655–AA building block dual shelf
(BA350–LA SBB shelf)

BN21H–02
BN21K–10†

†

SW500 cabinet expansion unit
(BA350–JA SBB shelf kit)
 SW800 cabinet expansion unit
(BA350–JA SBB shelf kit)

Components required for DWZZA SCSI signal converter operations.

7–8 Alpha AXP System StorageWorks Configurations

EZ51R
EZ54R
EZ58R
RRD42
RRD43
RRD44
RZ26
RZ26L
RZ28
RZ28B
RZ73
RZ74
TLZ06
TZ86
TZ87

DWZZA–VA
DWZZA–AA
EZ51R
EZ54R
EZ58R
RRD42
RRD43
RRD44
RZ26
RZ26L
RZ28
RZ28B
RZ73
RZ74
TLZ06
TZ86
TZ87
TZ867
TZ877

Table 7–7 DEC Personal Computer AXP (DECpc™AXP) StorageWorks Configurations
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

150

—

BN21H

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
TLZ6L
TZK10
TZK11

(BA350–Sx SBB shelf)

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
SWXTE–VE
TLZ06
TZ30–VE
TZK11–VE

Alpha AXP System StorageWorks Configurations

7–9

8
Digital VAX System
StorageWorks Configurations
This chapter lists the basic data required for configuring Digital VAX computer
systems for operation with StorageWorks subsystems. A supported system
has been evaluated in the specified configuration (that is, the host computer
and SCSI adapter, and the StorageWorks controller, shelf, enclosure, SCSI
cable, and supported StorageWorks building blocks (SBBs), and complies with
country-specific standards (for example, FCC, TUV, and so forth) and Digital
standards.
Note
The information in this chapter is general in nature and is for guidance
only. See the Digital Systems and Options Catalog as well as VAX system,
controller, shelf, and enclosure publications for detailed information about
each element of the configuration. See Part III for detailed information
about configuration rules and SCSI buses.

For Information About This System

See

VAX 4000 Systems and Servers

Table 8–3

VAXstation™ 4000 Systems

Table 8–2

MicroVAX 3100™ Systems

Table 8–1

Digital VAX System StorageWorks Configurations

8–1

These tables include the following information:
Column

Information
Host System

Models

Self-explanatory

SCSI Adapter—
Model and
Speed

StorageWorks—
SCSI Cable
StorageWorks—
Component
StorageWorks—
Devices

The shelves used for the controllers or the SBBs
 The enclosures containing the shelves

The devices that are supported in a specific configuration. Other devices may be
compatible, but have not been evaluated in this configuration.

Note
Unless specifically stated otherwise, all buses are assumed to operate
as a single-ended, slow SCSI bus with a transfer rate of 5 MB/s and a
maximum cable length of 6.0 meters (19.7 feet).

8–2 Digital VAX System StorageWorks Configurations

Table 8–1 MicroVAX 3100 Systems
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

30
40
80
90

Embedded†

Slow

BC09D–06‡

BA350–Kx deskside expansion unit

RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
RZ74
TLZ06
TLZ6L
TZK10
TZK11

(BA350–Sx SBB shelf)

90‡‡

Embedded†

Slow

BC09D–06‡
BN21L–0E††

StorageWorks RAID array 110

BN21H

BA350–Kx deskside expansion unit

subsystem
(BA350–Ex controller shelf
and SBB shelf)

(BA350–Sx SBB shelf)

90‡‡

†
‡
††
‡‡

Embedded†

Slow

BN21H
BN21L–0E††

StorageWorks RAID array 110
subsystem
(BA350–Ex controller shelf
and SBB shelf)

DWZZA–VA
DWZZA–AA
RZ25
RZ25L
RZ26
RZ26L

RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
RZ74
TLZ06
TLZ6L
TZK10
TZK11

DWZZA–VA
DWZZA–AA
RZ25
RZ25L
RZ26
RZ26L

Permanently set to device address 6.
Do not insert a 3½-inch disk SBB in slot 6. Maximum of six 3½-inch disk SBBs per shelf.
Do not set any SBB device address switch to 6.
Minimum length cable that can be used for this configuration.
Components required for DWZZA SCSI signal converter operation.
With KZDDA–AF upgrade kit installed.

Digital VAX System StorageWorks Configurations

8–3

Table 8–2 VAXstation 4000 Systems
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

VLC

Embedded

Slow

BC09D–06†

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

60
90

Embedded

Slow

BC09D–06†

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
TZK10

(BA350–Sx SBB shelf)

60
90

Embedded

†
‡

Slow

BN21K‡
BN21P–0B‡
H879–AA‡

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

StorageWorks RAID array 110

DWZZA–VA
DWZZA–AA
RZ25
RZ25L
RZ26
RZ26L

subsystem
(BA350–Ex controller and SBB shelf)

Minimum length cable that can be used for this configuration.
Components required for DWZZA SCSI signal converter operation.

(continued on next page)

8–4 Digital VAX System StorageWorks Configurations

Table 8–2 (Cont.) VAXstation 4000 Systems
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

60
90

PMAZ–AB

Slow

BN21H

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
TZK10

(BA350–Sx SBB shelf)

PMAZ–AB

†
‡

Slow

BN21K‡
BN21P–0B‡

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD44–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

StorageWorks RAID array 110

DWZZA–VA
DWZZA–AA
RZ25
RZ25L
RZ26
RZ26L

subsystem
(BA350–Ex controller and SBB shelf)

Minimum length cable that can be used for this configuration.
Components required for DWZZA SCSI signal converter operation.

Digital VAX System StorageWorks Configurations

8–5

Table 8–3 VAX 4000 Systems
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

100
100A

Embedded

Slow

BC09D–06†

BA350–KB deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
RZ74
TLZ06L
TLZ6L
TZK10
TZK11

†

(BA350–Sx SBB shelf)

Minimum length cable that can be used for this configuration.

8–6 Digital VAX System StorageWorks Configurations

9
DECsystem StorageWorks Configurations
This chapter lists the basic data required for configuring Digital DECsystem
computer systems for operation with StorageWorks subsystems. A supported
system has been evaluated in the specified configuration (that is, the host
computer and SCSI adapter, and the StorageWorks controller, shelf, enclosure,
SCSI cable, and supported StorageWorks building blocks (SBBs), and complies
with country-specific standards (for example, FCC, TUV, and so forth) and Digital
standards.
Note
The information in this chapter is general in nature and is for guidance
only. See the Digital Systems and Options Catalog as well as DECsystem
system, controller, shelf, and enclosure publications for detailed
information about each element of the configuration. See Part III for
detailed information about configuration rules and SCSI buses.

For Information About This System

See

PersonalDECstation 5000 Workstations

Table 9–1

DECstation 5000 Workstations

Table 9–2

DECsystem StorageWorks Configurations

9–1

These tables include the following information:
Column

Information
Host System

Models

Self-explanatory

SCSI Adapter—
Model and
Speed

StorageWorks—
SCSI Cable
StorageWorks—
Component
StorageWorks—
Devices

The shelves used for the controllers or the SBBs
 The enclosures containing the shelves

The devices that are supported in a specific configuration. Other devices may be
compatible, but have not been evaluated in this configuration.

Note
Unless specifically stated otherwise, all buses are assumed to operate
as a single-ended, slow SCSI bus with a transfer rate of 5 MB/s and a
maximum cable length of 6.0 meters (19.7 feet).

9–2 DECsystem StorageWorks Configurations

Table 9–1 Personal DECstation 5000 Workstations – UNIX®-Based RISC
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

20
25
33

Embedded

Slow

BC09D–06†

BA350–Kx deskside expansion unit

RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06

(BA350–Sx SBB shelf)

20
25
33

PMAZ–AA
PMAZ–AB

Slow
Slow

BN21H

20
25
33

PMAZ–AA
PMAZ–AB

Slow
Slow

BN21H

†

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD42–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06

(BA350–Sx SBB shelf)

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD42–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

Minimum length cable that can be used for this configuration.

DECsystem StorageWorks Configurations

9–3

Table 9–2 DECstation 5000 Workstations—UNIX®-Based RISC
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

125
133

Embedded

Slow

BC09D–06†

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TKZ09
TLZ06
TZK10

(BA350–Sx SBB shelf)

125
133

PMAZ–AA
PMAZ–AB

†

Slow
Slow

BN21H

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD42–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TKZ09
TLZ06
TZK10

(BA350–Sx SBB shelf)

Minimum length cable that can be used for this configuration.

(continued on next page)

9–4 DECsystem StorageWorks Configurations

Table 9–2 (Cont.) DECstation 5000 Workstations—UNIX®-Based RISC
SCSI Adapter
Models

240

Model

Embedded

Speed

Slow

StorageWorks
Cable

BC09D–06†

Component

Devices

BA353–Ax desktop expansion unit

RRD42–VE
RRD43–VE
RRD42–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TKZ09
TLZ06

(BA350–Sx SBB shelf)

BA353–Ax desktop expansion unit

†

RRD42–VE
RRD43–VE
RRD42–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

Minimum length cable that can be used for this configuration.

(continued on next page)

DECsystem StorageWorks Configurations

9–5

Table 9–2 (Cont.) DECstation 5000 Workstations—UNIX®-Based RISC
SCSI Adapter

StorageWorks

Models

Model

Speed

Cable

Component

Devices

240

PMAZ–AA
PMAZ–AB

Slow
Slow

BN21H

BA350–Kx deskside expansion unit

RRD42
RRD43
RRD44
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TKZ09
TLZ06
TZK10
TZK11

PMAZ–AA
PMAZ–AB

Slow
Slow

BN21H

240

†

(BA350–Sx SBB shelf)

BA353–Ax desktop expansion unit

Minimum length cable that can be used for this configuration.

9–6 DECsystem StorageWorks Configurations

RRD42–VE
RRD43–VE
RRD42–VE
RZ25
RZ25L
RZ26
RZ26L
RZ28
RZ28B
TLZ06
SWXTE–VE
TZ30–VE
TZK11–VE

10
Personal Computer System
StorageWorks Configurations
This chapter lists the basic data required for configuring Digital PC (personal
computer) systems for operation with StorageWorks subsystems. A supported
system has been evaluated in the specified configuration (that is, the host
computer and SCSI adapter, and the StorageWorks controller, shelf, enclosure,
SCSI cable, and supported StorageWorks building blocks (SBBs), and complies
with country-specific standards (for example, FCC, TUV, and so forth) and Digital
standards.
Note
The information in this chapter is general in nature and is for guidance
only. See the Digital Systems and Options Catalog as well as PC system,
controller, shelf, and enclosure publications for detailed information about
each element of the configuration. See Part III for detailed information
about configuration rules and SCSI buses.

See Table 10–1 for applicationDEC 400xMP Systems configurations that support
StorageWorks products.
These tables include the following information:
Column

Information
Host System

Models

Self-explanatory

SCSI Adapter—
Model and
Speed

Personal Computer System StorageWorks Configurations

10–1

StorageWorks—
SCSI Cable
StorageWorks—
Component
StorageWorks—
Devices

The shelves used for the controllers or the SBBs
 The enclosures containing the shelves

The devices that are supported in a specific configuration. Other devices may be
compatible, but have not been evaluated in this configuration.

Note
Unless specifically stated otherwise, all buses are assumed to operate
as a single-ended, slow SCSI bus with a transfer rate of 5 MB/s and a
maximum cable length of 6.0 meters (19.7 feet).

Table 10–1 applicationDEC 400xMP Systems
SCSI Adapter

StorageWorks

Model

Speed

Cable

Component

Devices

433MP

KZESA

Slow

BN21K
BN21P-0B†
H879–AA†

StorageWorks RAID array 110
subsystem
(BA350–Ex controller and SBB shelf)

DWZZA–VA
DWZZA–AA
RZ25
RZ25L
RZ26
RZ26L

†

Components required for DWZZA SCSI signal converter operations.

10–2 Personal Computer System StorageWorks Configurations

Part III
StorageWorks Subsystem Planning
This part contains descriptions of the basic instructions and considerations for
planning a StorageWorks subsystem. This information is organized as follows:
For Information About

See

Configuration rules

Chapter 11, General Configuration Rules

Designing a StorageWorks subsystem

Chapter 15, Designing a StorageWorks Subsystem

DSSI cables

Chapter 14, StorageWorks DSSI Cables

SCSI buses

Chapter 12, StorageWorks SCSI Buses

SCSI cables

Chapter 13, StorageWorks SCSI Cables

11
General Configuration Rules
This chapter describes the general configuration rules for StorageWorks products.
These rules may appear multiple times in this chapter because some rules apply
to multiple products.
There are two types of configurations rules—logical and physical.
•

Logical rules describe items such as selecting a device address.

•

Physical rules define capacities, cable lengths, and so forth.

The following sections are organized by general subject and include both the
logical and physical configuration rules.
Note
Configuration rules for a specific StorageWorks product have precedence
over the general configuration rules listed in this chapter.

General Configuration Rules 11–1

11.1 Device Addresses
The following general configuration rules apply to StorageWorks device addresses:
•

Either the physical location of the storage device in the shelf or the device
address switch setting determines the SCSI device address (small computer
system interface) or ID of the following devices:
–

3½-inch devices 1

–

All 5¼-inch devices

The physical location device addresses are assigned from right to left as
viewed from the front, as shown in Figure 11–1.
Figure 11–1 Typical SBB Shelf—Device Addresses

(7)
POWER

SCSI
CONNECTORS

CXO-3617B-PH

•

The available device addresses for each shelf are 0 through 6.

•

The shelf slot numbers and the device addresses for 3½-inch SBBs
(StorageWorks building blocks) are the same.

•

The device addresses for most SBBs can be set either manually using the
address switch on the rear of the SBB or automatically by the shelf connector.
The default address is ‘‘automatic’’ to activate the shelf connector device
address. (For detailed information on setting device addresses with the
switches, see the StorageWorks Solutions Shelf and SBB User’s Guide.)

•

The shelf power slot is always slot 7 and does not have a device address.

Some 3½-inch disk drives do not have a device address switch.

11–2 General Configuration Rules

11.2 SBB Shelves
The following general configuration rules apply to SBB shelves:
•

Shelf capacity is measured by the number of 3½-inch SBBs in the shelf (refer
to Figure 11–1).

•

Each 3½-inch SBB occupies one slot in a shelf.

•

All shelf power supplies and battery backup units (BBUs) are mounted in
3½-inch modular carriers.

•

Shelf power requirements are based on a maximum of seven 3½-inch SBBs.

•

All devices in a shelf must spin up sequentially under software control at a
4-second or greater intervals.

•

A 5¼-inch SBB requires three slots for mounting, as shown in Figure 11–2.

Figure 11–2 Typical 5¼-Inch SBB Installation

CXO-3608A-PH

•

The 5¼-inch SBB can hold either one full-height (FH), two half-height (HH)
devices, or three one-third height devices.
–

A 5¼-inch SBB with an FH device has one connector mounted in the
center position.

–

A 5¼-inch SBB with two HH or one-third height devices has two
connectors. The connector in the center position is for the lower HH
device; the other connector is for the HH device.

–

A 5¼-inch SBB with three one-third devices has three connectors. The
connector in the center position is for the lower device; the connector on
the left rear is for the upper device, and the connector on the right rear is
for the middle device.

General Configuration Rules 11–3

11.3 SCSI Bus
The following general configuration rules apply to StorageWorks SCSI buses:
•

The maximum number of storage devices on a single SCSI–2 bus is seven.

•

The total length of an 8-bit, single-ended, SCSI bus is the distance between
the two bus terminators.

•

The total length of an 8-bit, single-ended, SCSI bus operating at 10 MB/s
cannot exceed 3.0 meters (9.8 feet).

•

The total length of an 8-bit, single-ended, SCSI bus operating at 5 MB/s
cannot exceed 6.0 meters (19.7 feet).

•

The rate at which data is transferred over an 8-bit, single-ended, SCSI
bus is primarily determined by the capabilities of the host SCSI adapter or
controller. A controller is rated as either fast or slow based on the maximum
rate at which it can transfer data. Prior to transferring the data, the
controller determines the maximum rate at which each device can accept
data. If this rate is lower than the controller’s maximum rate, the controller
uses the lower rate for the transfer.
This capability enables the reliable transfer of data to both slow and fast
devices on the same bus, provided the bus is designed as a fast bus with a
maximum bus length of 3.0 meters (9.8 feet).
Note
When the adapter can transmit at the fast rate and there is at least
one fast device on the bus, the SCSI bus must be designed as a fast bus
(maximum length 3.0 meters [9.8 feet]).

•

The total length of a fast-wide, 16-bit, differential SCSI bus cannot exceed 25
meters (82 feet).

•

Both a single-ended and a differential SCSI bus can be extended using SCSI
signal converters. A maximum of two SCSI signal converters, including one
installed in the shelf, such as a DWZZA–VA, can be used on any one bus.

•

A single, fast SCSI bus cannot be used for more than two shelves.

•

All SCSI buses require termination at both ends of the bus.

•

The single-ended SCSI buses are terminated on the last shelf on the bus.
Note
SCSI buses must be terminated at both ends for proper operation. SBBs
do not terminate a bus; a BA35X–MB terminator board must be installed
on the shelf backplane.

•

The rules for installing SCSI bus terminators and jumpers are shelf specific.

•

Multiple SCSI buses on a shelf can be connected together using a jumper
board (BA35X–MC). For example, two buses can be connected into one; three
buses can be connected into two, and so on.

11–4 General Configuration Rules

•

The target ID addresses for hosts and controllers are normally as follow:
–

First (single) host or controller: slot 7

–

Second (dual) host or controller: slot 6

For a detailed description of the StorageWorks shelf SCSI buses, including
lengths, see Chapter 12.

11.4 HSZ-Series Disk Array Controllers
The basic rules for configuring the HSZ10–AA and HSZ15–AA disk array
controllers (part of the StorageWorks Redundant Array of Independent Disks
[RAID] subsystem) are primarily concerned with the disk drives. These rules,
listed in Table 11–1, are dependent upon the RAID level (0, 1, 3, or 5). For
detailed configuration rules, see the DEC RAID Subsystem User’s Guide.
Table 11–1 StorageWorks Raid Array Subsystem 110 Configuration Rules
RAID Level

Drives per
LU1

0, 1, 3, 5

N/A

All drives within a RAID level must be of the same vendor
type and capacity.

1 to 5

None

2 to 4

Must specify an even number of drives
 The mirrored pairs are created by grouping the first
and second drive you enter as the first pair; the
third and fourth drives as the second pair; and so forth
 Mirrored pair drives cannot be on the same channel

3 or 5

None

3 to 5

Each drive must be on a separate channel

Comments

An LU (logical unit) is a grouping of drives that has its own device SCSI ID and number.
For most purposes, a logical unit is equivalent to an array.

11.5 HSZ40 SCSI Disk Array Controller
You must observe the following rules when configuring an HSZ40 SCSI disk array
controller:
•

The HSZ40 supports only disk storage devices.

•

There is no provision for dual-redundant (two controller) HSZ40
configurations.

•

An HSZ40 SCSI controller supports the following host adapters:
If Your System Is a

The Controller Supported Is:

DEC 3000

KZTSA

Alpha AXP DEC 7000

KSMSA†

Alpha AXP DEC 10000

KSMSA†

†Requires a SCSI bus converter DWZZA.

General Configuration Rules 11–5

11.6 HSJ Array Controller Family
The hierarchical storage controller (HSC) CI configuration rules for supporting
from 1 to 31 host nodes also apply to the HSJ array controller family. See the
Software Product Descriptions (SPDs) and release notes for specific configuration
rules for the following host adapters:
If Your System Is a

The Controller Supported Is:

SBO-based system

CI780

BI-based system

CIBCA–B

XMI-based system

CIXCD

CAUTION
Installing CD–ROM devices and other storage devices on the same
HSJ-series controller SCSI bus can cause time-out problems. Do not
install any other storage device on a SCSI bus with a CD–ROM when
using an HSJ-series controller.

There are two types of HSJ array controllers—the HSJ40-series and the
HSJ30-series. The HSJ40-series has six SCSI ports (buses) and the HSJ30-series
has three SCSI ports (buses). The basic difference between these two types of
controllers is the total number of devices supported. The HSJ40-series supports
twice as many devices as does the the HSJ30-series.
A single controller shelf, such as the BA350–MA, can contain two controllers and
cache memories. Therefore, there are two sets of configuration rules:
•

Rules that apply to only the single controller configuration—see
Section 11.6.1.

•

Rules that apply to both configurations—see Section 11.6.2.

See the HS Family of Array Controllers User’s Guide for detailed information
about the HS family of array controllers.

11.6.1 HSJ Single Controller
The following general rules apply only to the single-controller configuration:
•

Install the controller either in the top slot or the right-hand slot.

•

A single controller port can support a maximum of two 5¼-inch, full-height
(FH) SBBs in a single SBB shelf.

•

A single controller port can support a maximum of four 5¼-inch, FH SBBs in
two adjacent SBB shelves.

•

A single controller port can support a maximum of six devices, using a
combination of 3½-inch and 5¼-inch SBBs.

•

A single controller port can support a maximum of seven 3½-inch storage
devices.

11–6 General Configuration Rules

11.6.2 HSJ Single and Dual-Redundant Controllers
The following configuration rules apply to both the single- and dual-controller
configurations:
•

The minimum number of power supplies per controller shelf and SBB shelf is
one.

•

The preferred number of power supplies per controller shelf and SBB shelf is
two.

•

The maximum number of SBBs supported by a single HJSJ40 controller is 42
(that is, seven devices per SCSI channel).

•

The preferred number of devices supported by a single HSJ40 controller is 36
(that is, six devices per SCSI channel).

•

The maximum number of SBBs supported by a single HJSJ30 controller is 21
(that is, seven devices per SCSI channel).

•

The preferred number of devices supported by a single HSJ30 controller is 18
(that is, six devices per SCSI channel).

•

CD–ROMs must be on a dedicated bus. No other storage devices, such as
disks or tapes, can be on the same bus.

•

A maximum of two adjacent SBB shelves3 can be connected to a single
controller port.

•

Half-rack or full-depth devices, such as the TZ867 tape drives, must have a
dedicated controller port. No more than two devices can be connected to a
single port.

The second shelf is mounted directly below the first shelf with no space between them.

General Configuration Rules 11–7

11.7 HSC SCSI Controller
This section describes the general rules for configuring the HSC SCSI controller,
commonly referred to as a ‘‘K.scsi controller.’’ For detailed configuration rules, see
the HSC Controller User’s Guide.

11.7.1 HSC Controller SBB Shelf—Single SCSI Bus
The following configuration rules apply when there is only one SBB shelf SCSI
bus and a maximum of seven SBBs:
•

Install the terminator board (BA35X–MB) in the backplane connector
adjacent to slot 1.

•

Install the jumper board (BA35X–MC) connector adjacent to slot 5.

•

The SCSI bus is a slow bus with a maximum bus length of 6.0 meters (19.7
feet).

•

Place the HSC controller in the end bus position for differential SCSI bus
operations with a maximum bus length of 25 meters (82 feet).

•

Install the DWZZA–VA SCSI signal converter in slot 0.

•

Disable the DWZZA–VA SCSI signal converter, single-ended terminator when
a SCSI ‘‘A’’ cable is connected to the upper (JA1) shelf connector.

•

Disable the DWZZA–VA SCSI signal converter, differential terminators when
using a trilink connector block (H885–AA).

11.7.2 HSC Controller SBB Shelf—Dual SCSI Buses
The following configuration rules apply when using both SCSI–2 buses on a shelf:
•

Install the terminator board (BA35X–MB) in the backplane connector
adjacent to slot 5.

•

Install the jumper board (BA35X–MC) in the backplane connector adjacent to
slot 1 for safekeeping. This board has no function in this configuration and
installing it here does not affect the SCSI bus operations.

•

The SCSI bus is a slow bus with a maximum bus length of 6.0 meters (19.7
feet).

•

Place the HSC controller in the end bus position for differential SCSI bus
operations with a maximum bus length of 25 meters (82 feet).

•

Install the DWZZA–VA SCSI signal converter in slot 0 or slot 1.

•

Disable the slot 0, DWZZA–VA SCSI signal converter, single-ended terminator
when a SCSI ‘‘A’’ cable is connected to the upper (JA1) shelf connector.

•

Disable the slot 1, DWZZA–VA SCSI signal converter, single-ended terminator
when a SCSI ‘‘A’’ cable is connected to the lower (JB1) shelf connector.

•

Disable the DWZZA–VA SCSI signal converter, differential terminators when
using a trilink connector block (H885–AA).

•

Only the HSC controller connected to the upper SCSI connector (JA1) can
monitor the SHELF_OK signal.

11–8 General Configuration Rules

11.7.3 HSC Controller Multiple SBB Shelves
Multiple SBB shelves can be used with an HSC controller, and they can be
configured as either a single- or dual-bus shelf using the following rules:
•

The single-bus or dual-bus configuration rules apply to each individual singleor dual-bus shelf.

•

Use the following rules to configure the first shelf:
–

Connect the HSC controller to the upper connector (JA1).

–

Install the jumper board (BA35X–MC) in the backplane connector
adjacent to slot 5.

–

Connect the lower connector (JB1), the output connector, to the upper
connector (JA1), the input connector, of the second shelf.
Note

Installing a terminator board in the first shelf will terminate the bus. No
devices in the second shelf will be on the bus.

•

Configure the second shelf as either a single- or dual-bus shelf.

•

Use the following rules to configure the second shelf when adding five or more
3½-inch SBBs:

•

–

Install the jumper behind slot 5.

–

Install the terminator behind slot 1.

–

Use the upper connector (JA1) as the input connector.

Use the following rules to configure the second shelf when adding three or
fewer 3½-inch SBBs:
–

Connect the lower connector (JB1) of the first shelf to the upper connector
(JA1) of the second shelf.

–

Install the terminator board behind slot 5.

–

Install the jumper board behind slot 1 for safekeeping.

Use the following rules to configure the second shelf when adding four
3½-inch SBBs:
–

Connect the lower connector (JB1) of the first shelf to lower connector
(JB1) of the second shelf.

–

Install the terminator board behind slot 5.

–

Install the jumper board behind slot 1 for safekeeping.

General Configuration Rules 11–9

11.8 HSD30 Array Controller
The following rules apply to to the HSD30 array controller:
•

Each DSSI bus supports a maximum of eight nodes.

•

Disk and tape storage devices may be installed on the same DSSI controller
port (SCSI) bus.

•

All systems connected to a single DSSI bus must have common power and
ground circuits.

•

All DSSI buses must be terminated at both ends at all times.
CAUTION
Disconnecting the DSSI host port cable removes one of the bus
terminations. Disconnecting the DSSI hosts port cable on an active
bus (one to which power is applied) can cause data corruption.

•

An HSD30 DSSI controller with V1.4 or a subsequent firmware release
supports the following host adapters:
If Your System Is a

The Controller Supported Is a

DEC system

SHAC

VAX system

SHAC

DEC 4000 system

D4000

XMI-based system

KFMSA

11–10 General Configuration Rules

11.9 Power Supplies
The following general configuration rules apply to StorageWorks power supplies:
•

Each shelf requires either an ac or dc input primary power supply.

•

Each StorageWorks enclosure usually provides switch-controlled input
voltages to the shelf power supplies.

•

Each power supply can support a maximum of seven 3½-inch SBBs or one
3½-inch and two 5¼-inch SBBs.

•

The shelf power supply must be mounted in slot 7 (power slot) of the shelf, as
shown in Figure 11–3.

•

An optional redundant power supply or an optional battery backup unit
(BBU) can be mounted in slot 6.

Figure 11–3 BA350–SA SBB Shelf (Redundant AC Power Supplies)

(7)

(6)

CXO-3610B-PH

General Configuration Rules 11–11

11.10 SW800 Data Center Cabinet
The SW800 data center cabinet is the largest StorageWorks storage enclosure and
has a capacity of 24 SBB shelves. The following general configuration rules apply
to this cabinet:
•

Capacities are measured by the number of shelves that can be installed.

•

Shelves are installed in cabinets in a specific sequence to maintain stability.
The installation sequence is model specific.

•

Unless specifically stated otherwise, the shelf configuration rules apply to all
cabinets.

•

Front and rear service areas of approximately 0.9 meters (3.0 feet) are
required.

•

The SW800-series data center cabinets have a three-phase ac distribution
unit rated for either 380–416 V ac, 50 Hz, or 120/208 V ac, 60 Hz.

•

A second cable distribution unit is required when more than 12 shelves are
installed.

11.11 SW500 Data Center Cabinet
The SW500 data center cabinet has a maximum capacity of 10 SBB shelves. The
following general configuration rules apply to this cabinet:
•

Capacities are measured by the number of shelves that can be installed.

•

Shelves are installed in cabinets in a specific sequence to maintain stability.
The installation sequence is model specific.

•

Unless specifically stated otherwise, the shelf configuration rules apply to all
cabinets.

•

Front and rear service areas of approximately 0.9 meters (3.0 feet) are
required.

•

The SW500-series data center cabinets have a single-phase ac distribution
unit rated for either 240 V ac, 50 Hz, or 120 V ac, 60 Hz.

11–12 General Configuration Rules

11.12 Deskside Expansion Units
All of the deskside expansion units (BA350–Kx) use the BA35X–VA pedestal
mounting kit. A single kit is used to mount an SBB shelf or a controller shelf.
Two kits are used to mount a controller and SBB shelf (that is, a StorageWorks
RAID array subsystem).
The following general configuration rules apply to the StorageWorks deskside
expansion units:
•

Unless specifically stated otherwise, the shelf configuration rules apply to all
deskside expansion units.

•

Each unit has an ac distribution unit that provides switch-controlled input
voltages to the shelf power supplies.

•

Each unit has a switched ac outlet for connecting a maximum of two units to
the same wall receptacle.

•

Because the unit is portable, it can be installed without a front or rear service
area.

•

Slot 6 is normally reserved for either a redundant power supply or a BBU.

General Configuration Rules 11–13

11.13 Desktop Expansion Units
Each StorageWorks desktop expansion unit contains a maximum of three 3½-inch
SBBs or two 3½-inch SBBs and one 5¼-inch half-height (HH) device. An ac input
power supply is integral to this unit. The following general configuration rules
apply to the desktop expansion unit:
•

The unit can be installed either beneath the monitor as shown in Figure 11–4
or beneath the central processor unit (CPU). It can also be installed in the
vertical position on the desktop.

•

No service area is required.

Figure 11–4 BA353–AA Desktop Expansion Unit

DESKTOP
EXPANSION
UNIT

CXO-3692A-PH

11–14 General Configuration Rules

12
StorageWorks SCSI Buses
This chapter describes the basic StorageWorks data bus.

12.1 StorageWorks Data Bus Description
The StorageWorks data bus is an 8-bit, single-ended, small computer system
interface (SCSI). This bus has eight device addresses (0 through 7) that identify
devices on the bus.
•

Device address 7 is normally reserved for the host computer address.

•

The remaining seven addresses (0 through 6) are used for the individual
storage device addresses.

StorageWorks shelves use a SCSI bus that can transfer data either at a slow
rate (5 MB/s [Megabytes per second]) or the fast rate (10 MB/s). The rate at
which data is transferred is affected by many things. However, the two primary
concerns are as follow:
•

The maximum rate at which the controller or initiator can transmit data

•

The maximum rate at which the target device can process data

The rate at which data is transferred over an 8-bit, single-ended, SCSI bus is
primarily determined by the capabilities of the host SCSI adapter or controller.
A controller is rated as either fast or slow based on the maximum rate at which
it can transfer data. Prior to transferring the data, the controller determines the
maximum rate at which each device can accept data. If this rate is lower than
the controller’s maximum rate, the controller uses the lower rate for the transfer.
This capability enables the reliable transfer of data to both slow and fast devices
on the same bus provided the bus is designed as a fast bus with a maximum bus
length of 3.0 meters (9.8 feet).
CAUTION
When the adapter can transmit at the fast rate and there is at least
one fast device on the bus, the SCSI bus must be designed as a fast bus
(maximum length 3.0 meters [9.8 feet]).

StorageWorks SCSI Buses

12–1

The maximum length of the fast and slow buses, including all cables and shelf
buses, is shown in Table 12–1. All bus lengths are rounded off to the nearest
tenth of a unit.
Table 12–1 SCSI Bus Parameters
Bus Type

Transfer Rate

Meters

Feet

8-bit, single-ended

5 MB/s

6.0

19.7

8-bit, single-ended

10 MB/s

3.0

9.8

16-bit, differential

20 MB/s

25.0

82.0

12.2 Terminating SCSI Buses
The shelf end of the SCSI bus is terminated with a terminator board mounted on
the shelf backplane. See the individual controller documentation for termination
options.
Note
All StorageWorks SBB shelf SCSI buses are terminated on the shelf
backplane. There is no SCSI bus termination on any SBB device.

12.3 Computing SCSI Bus Lengths
Operation of an 8-bit, single-ended, SCSI bus is affected by the total bus
length (that is, the total distance between the two bus terminators). Failure to
accurately determine the total SCSI bus length can cause signal degradation
to the point where the bus is non-operational. Practical experience, especially
when dealing with a fast SCSI bus (10 MB/s transfer rate), has shown that the
limitations stated in Section 12.1 are applicable for most bus operations.
Use the procedures in the following sections to determine the SCSI bus lengths
for either single or multiple SBB shelves.

12.3.1 Single StorageWorks Shelf SCSI Bus Lengths
As shown in Figure 12–1, the SCSI bus for a single shelf is composed of the
following segments:
•

Segment A—The distance from the controller terminator (T1) to the SCSI
bus connector (BC).

•

Segment B—The length of the SCSI cable from the controller shelf to the
SBB shelf (either 1 meter [3.3 feet] or 2 meters [6.5 feet]).

•

Segment C—For a single SBB shelf this is the distance from the SBB shelf
input connector (IC) to the shelf SCSI terminator (T2).

Use the information in Table 12–2 and the following formula to calculate the
length of a SCSI bus:

Total Bus Length = A + B + C

12–2 StorageWorks SCSI Buses

Figure 12–1 SCSI Bus Segments—Single SBB Shelf

CONTROLLER

SBB SHELF

OC
SEGMENT A

SEGMENT B

SEGMENT C
CXO-3941A-MC

Table 12–2 Single SBB Shelf SCSI Bus Lengths
Shelf

Bus

Input

Slot 1

Slot 5

Meters

Feet

0.9

2.9

Single Shelf—Single Bus
1

JA1

Terminator

Jumper

JA1

POWER

7-DEVICE BUS INPUT
BUS LENGTH: 0.9 m (34.7 in)

(7)

JB1
CXO-3596B-MC

Single Shelf—Two Buses
1

JA1

Jumper †

Terminator

0.4

1.4

JB1

Jumper †

Terminator

0.6

2.0

JA1

POWER

3-DEVICE BUS INPUT
BUS LENGTH: 0.4 m (16.4 in)

(7)

JB1

4-DEVICE BUS INPUT
BUS LENGTH: 0.6 m (23.6 in)
CXO-3597B-MC

† The jumper is placed here for safekeeping and has no effect on the SCSI bus.

StorageWorks SCSI Buses

12–3

12.3.2 Multiple StorageWorks Shelves SCSI Bus Lengths
As shown in Figure 12–2, the SCSI bus for multiple SBB shelves on a single SCSI
bus is composed of the following segments:
•

Segment A—The distance from the controller terminator to the shelf
backplane connector (port) and from there to the SCSI bus connector

•

Segment B—The length of the BN21H-series cable from the controller shelf
to the SBB shelf (either 1 meter [3.3 feet] or 2 meters [6.5 feet])

•

Segment C—The distance from the first or second SBB shelf input connector
through the jumper (J) to the shelf output connector

•

Segment D—The length of the SCSI cable (0.5 meters or 1.6 feet) that
connects the SBB shelves

•

Segment E—The distance from the last shelf input connector to the bus
terminator on the same shelf.

Use the information in Table 12–3 and the following formula to calculate the
length of a SCSI bus:

Total Bus Length = A + B + C + D + E

Table 12–3 Multiple SBB Shelves SCSI Bus Lengths
Shelf

Bus

Input

Slot 1

Slot 5

Meters

Feet

Two Adjacent Shelves—Single Bus
1

JA1

None †

Jumper

0.9 ‡

2.9 ‡

JA1

Terminator

Jumper

0.9

2.9

BN21H–0E Cable

0.5

1.6

Total Bus Length

2.3

7.4
JA1

J
POWER

SHELF 1

(7)

J
POWER

SHELF 2

0
T

(7)

7-DEVICE BUS INPUT
BUS LENGTHS:
SHELF 1: 0.9 m (35.7 in)
JB1
SHELF 2: 0.9 m (34.7 in)
OUT
CABLE: 0.5 m (19.7 in)
TOTAL:
2.3 m (90.1 in)
IN
JA1

JB1
CXO-3598B-MC

† Do not install a terminator here.
‡ From input connector (JA1) to output connector (JB1)

12–4 StorageWorks SCSI Buses

Figure 12–2 SCSI Bus Segments—Multiple SBB Shelf
CONTROLLER
T1

FIRST SBB SHELF
BC

SEGMENT C*
OC

SEGMENT B

SEGMENT D*

SEGMENT A

LAST SBB SHELF
T2

OC
*WHEN THERE ARE MORE THAN TWO SHELVES,
REPEAT SEGMENTS C AND D FOR ALL BUT THE
LAST SHELF.

SEGMENT E
CXO-3942A-MC

StorageWorks SCSI Buses

12–5

13
StorageWorks SCSI Cables
The process for selecting SCSI cables is basically the same whether or not the
host system is a Digital system. Part II lists the Digital systems StorageWorks
configurations to include the compatible SCSI cables. All you have to do is
determine the cable length.
For a non-Digital system, you must refer to the host system and controller
documentation and determine the following:
•

The SCSI adapter or controller type

•

The SCSI connector pin configuration (50-pin or 68-pin)

•

The connector configuration (straight, right-angle) and latching mechanism
(thumb latches, thumb screws, bale locks, and so forth)

•

The controller bus speed (fast [10 MB/s] or slow [5 MB/s]).

For all host systems you must then calculate the maximum SCSI bus cable
length. This is the difference between the maximum SCSI bus length, which is
determined by the bus speed, and the total of the following:
•

The SCSI bus length between the controller terminator and the controller
cable connector

•

The SCSI bus length between the shelf input connector and either the shelf
terminator or shelf output connector

•

The special cables

•

The cables connecting the SBB shelves

It is recommended that you select the shortest cable possible to connect the host
to the StorageWorks subsystem.

StorageWorks SCSI Cables

13–1

13.1 SCSI Cable Connectors
All BA350–SB SBB shelves have two SCSI, 50-pin, high-density, female
connectors. Only cables, such as the BN21H-series, with a SCSI 50-pin,
high-density, male, straight connector can be attached to the SBB shelves. The
BN-series StorageWorks SCSI cables are built to SCSI–3 specifications and
operate reliably as part of either a fast or slow bus.
Controllers can have both 50-pin, high-density, female connectors and 68-pin,
high density, female connectors. Only connectors with a 50-pin, high-density,
male, straight connector or a 68-pin, high-density, right-angle connector can be
attached to the StorageWorks controller shelves. The following sections contain a
general description of the StorageWorks-compatible SCSI cables for use with the
following components:
•

Shelves

•

Controllers

•

Host computers or adapters

All of the StorageWorks BN-series SCSI cables conform to SCSI–3 standards.

13.2 StorageWorks Shelf SCSI Cables
All the StorageWorks shelves and expansion units, such as the BA350–KB
deskside expansion unit and the BA353–Ax desktop expansion unit, have
SCSI ‘‘A’’ type 50-pin, high-density, female, straight connectors. Only cables
with a 50-pin, high-density, male, straight connectors, such as found on the
BN21H-series cables, can be used.
The following sections contain detailed descriptions of the compatible SCSI
cables, to include connectors, typical use, and lengths:
•

SCSI–2, 50-conductor, single-ended ‘‘A’’ cables—Section 13.4

•

SCSI–3, 68-conductor, differential ‘‘P’’ cables—Section 13.5

•

SCSI–2 and SCSI–3 special purpose cables, such as ‘‘Y’’ cables, trilink
connectors, and terminator blocks—Section 13.6

13.3 Recommendations for StorageWorks Shelves
Digital strongly recommends that the same length cables be used to connect all
the SBB shelves to the controller shelves in a cabinet or deskside expansion unit.
The following advantages can be realized:
•

The cables between shelves will not be under any strain.

•

All the SCSI–2 buses are the same length.

•

The possibility of unbalancing a bus by inadvertently exceeding the maximum
bus length is avoided.

13–2 StorageWorks SCSI Cables

13.4 SCSI ‘‘A’’ Cables
The SBB shelf SCSI bus is an 8-bit wide, single-ended bus with two 50-pin,
high-density, female connectors (JA1 and JB1). The compatible cable for these
connectors is a 50-conductor cable with a 50-pin, high-density, shielded male,
straight connector with thumb latches (also known as squeeze-to-release latches).
This combination of conductors and connectors is a SCSI ‘‘A’’ cable.
The primary difference between the ‘‘A’’ cables is the connectors. The following
sections describe the different types of SCSI ‘‘A’’ cables that are compatible with
the SBB shelves. Table 13–1 lists the SCSI ‘‘A’’ cable specifications, to include
connectors, length, and cable order numbers.
Table 13–1 SCSI ‘‘A’’ Cable Specifications
Cable Description

Meters

Feet

Cable Order No.

Standard cable, 50-conductor
 Two 50-pin, high-density, male, straight connectors

0.3
0.5
1.0
1.5
2.0
3.0
5.0
10.0
15.0
20.0

1.0
1.6
3.3
4.8
6.5
9.8
16.4
32.8
49.2
65.6

BN21H–0C
BN21H–0E
BN21H–01
BN21H–1E
BN21H–02
BN21H–03
BN21H–05
BN21H–10
BN21H–15
BN21H–20

HSC controller to HSC controller cable, 50-conductor
 Two 50-pin, high-density, male, straight connectors
with thumbscrews

2.0

6.5

BN31A–02

HSC controller to StorageWorks shelf cable, 50-conductor

2.0
3.0

6.5
9.8

BN31B–02
BN31B–03

One 50-pin, high-density, male, straight connector
 One 50-pin, low-density, male, right-angle connector

2.0
3.0
5.0

6.5
9.8
16.4

BN21R–02
BN21R–03
BN21R–05

Adapter cable, 50-conductor
 One 50-pin, high-density, straight connector
 One 50-pin, low-density, straight connector

0.9
1.8
3.7

3.0
6.0
12.0

BC09D–03
BC09D–06
BC09D–12

Alpha AXP DEC 7000 and DEC 1000 SCSI cable,
50-conductor
 Two 50-pin, high-density, male, straight connectors

2.0
3.0
5.0

6.5
9.8
16.4

BC10U–02
BC10U–03
BC10U–05

One 50-pin, high-density, male, straight connector
with thumb latches

One 50-pin, high-density, male, straight connector
with thumb screws
Adapter cable, 50-conductor

StorageWorks SCSI Cables

13–3

13.4.1 BN21H-Series SCSI ‘‘A’’ Cables
The BN21H-series cables have two male, 50-pin, high-density, straight connectors
with thumb latches, as shown in Figure 13–1. These cables are typically used to
connect SBB shelves to the following:
•

Other SBB shelves

•

SCSI adapters, such as the following:
–

KZMSA, an XMI to SCSI adapter

–

PMAZ–AA and PMAZ–AB

–

K.scsi

Figure 13–1 BN21H-Series Cable

StorageWorks
CONNECTOR

CXO-4165A-MC_R

13.4.2 BN21R-Series SCSI ‘‘A’’ Cables
The BN21R-series ‘‘A’’ cable shown in Figure 13–2 has the following connectors:
•

One male, 50-pin, low-density, right-angle connector

•

One male, 50-pin, high-density, straight connector with thumb latches

The BN21R-series cables cables are typically used to connect a StorageWorks
shelf to a 50-pin, low-density receptacle, such as that used by the DEC 4000
Model 610 AXP Distributed/Departmental Server.
Figure 13–2 BN21R-Series Cable

StorageWorks
CONNECTOR

CXO-4166A-MC_R

13.4.3 BC09D-Series Cables SCSI ‘‘A’’ Cables
The BC09D-series cables shown in Figure 13–3 have the following connectors:
•

One male, 50-pin, low-density, straight connector with bale locks

•

One male, 50-pin, high-density, straight connector with thumb latches

13–4 StorageWorks SCSI Cables

These cables, sometimes referred to as transition cables, allow you to connect
SCSI devices that have different density, 50-pin connectors. The BC09D-series
cables cables are typically used to connect SBB shelves to the following:
•

Devices with embedded SCSI adapters, such as DEC 3000 AXP servers,
MicroVAX 3100 systems, and so forth

•

KZESA, an EISA to SCSI adapter

Figure 13–3 BC09D-Series Cable

StorageWorks
CONNECTOR
CXO-4167A-MC_R

13.4.4 BC10U-Series Cables SCSI ‘‘A’’ Cables
The BC10U-series cables cables are used only with AXP systems with the BA655
SCSI plug-in unit (PIU). Do not use this SCSI cable in any other configuration.
These cables have two male, 50-pin, high-density, straight connectors with thumb
latches, as shown in Figure 13–4. These cables are typically used to connect SBB
shelves to the following:
•

Other SBB shelves

•

KZMSA, an XMI to SCSI adapter

Figure 13–4 BC10U-Series Cable

StorageWorks
CONNECTOR

CXO-4168A-MC_R

13.4.5 BN31A-Series Cables HSC Controller ‘‘A’’ Cables
The BN31A–02 cable, shown in Figure 13–5, has two 50-pin, high-density, male
connectors with thumb-screws. This cable is used with the HSC controllers.

StorageWorks SCSI Cables

13–5

Figure 13–5 BN31A-Series Cable

StorageWorks
CONNECTOR

CXO-4169A-MC_R

13.4.6 BN31B–02 Series HSC Controller ‘‘A’’ Cable
The BN31B–02 cable shown in Figure 13–6 has the following connectors:
•

One 50-pin, high-density, male, straight connector with thumb screws

•

One 50-pin, high-density, male, straight connector with thumb latches

Figure 13–6 BN31B–02 50-Pin

StorageWorks
CONNECTOR

CXO-4170A-MC_R

13.4.7 BN31B–03 HSC Controller ‘‘A’’ Cable
The BN31B–03 cable, shown in Figure 13–7, has two 50-pin, low-density, male
connectors with thumb screws. This cable is used with the HSC controllers.

13–6 StorageWorks SCSI Cables

Figure 13–7 BN31B–03 50-Pin, High-Density HSC Controller Connector

StorageWorks
CONNECTOR

CXO-4169A-MC_R

13.5 SCSI ‘‘P’’ Cables
Many host computers use the 16-bit wide, ‘‘P’’ SCSI bus. The controller or SCSI
signal converters use a 68-conductor cable, a ‘‘P’’ cable.
The primary difference between the cables is the connectors. The following
sections describe the different types of SCSI ‘‘P’’ cables. Table 13–2 lists the SCSI
‘‘P’’ cables, to include their connectors, length, and cable order number.
Table 13–2 SCSI ‘‘P’’ Cable Specifications
Cable Description

Meters

Feet

Cable Order No.

Standard cable, 68-conductor
 One 68-pin, high-density, straight connector
 One 68-pin, high-density, right-angle connector

1.0
2.0
3.0
5.0
8.0
10.0
15.0
20.0
23.0

3.3
6.5
9.8
16.4
26.2
32.8
49.2
65.6
75.5

BN21K–01
BN21K–02
BN21K–03
BN21K–05
BN21K–08
BN21K–10
BN21K–15
BN21K–20
BN21K–23

Standard cable, 68-conductor
 Two 68-pin, high-density, right-angle connectors

0.15
0.5
1.0
2.0
3.0
5.0
10.0
15.0
20.0

0.5
1.6
3.3
6.5
9.8
16.4
32.8
49.2
65.6

BN21L–0B
BN21L–0E
BN21L–01
BN21L–02
BN21L–03
BN21L–05
BN21L–10
BN21L–15
BN21L–20

13.5.1 BN21K-Series SCSI ‘‘P’’ Cables
The BN21K-series cables shown in Figure 13–8 have the following connectors:
•

One male, 68-pin, high-density, straight connector with jackscrew
(thumbscrew) fasteners

•

One male, 68-pin, high-density, right-angle connector with screw fasteners

StorageWorks SCSI Cables

13–7

These cables are typically used to connect a StorageWorks controller shelf to a
host SCSI adapter, such as the KZTSA or a K.scsi.
Figure 13–8 BN21K-Series Cable

CXO-4171A-MC_R

13.5.2 BN21L-Series StorageWorks SCSI ‘‘P’’ Cables
The BN21L-series ‘‘P’’ cables shown in Figure 13–9 have two male, 68-pin, highdensity, right-angle connectors with screw fasteners. The BN21L-series cables
are typically used to connect a StorageWorks controller to another controller or
a controller to a SCSI converter when there is not enough clearance to use a
straight connector.
Figure 13–9 BN21L-Series Cables

CXO-4172A-MC_R

13.6 Special SCSI Cables
There are many compatible SCSI devices that cannot be connected together using
the standard SCSI ‘‘A’’ or ‘‘P’’ cables. In some special cases there is a requirement
to connect a SCSI adapter to multiple controllers, place a device in the middle of
the bus, or other special configurations. Most of these cases can be handled using
a trilink connector block (a ‘‘Y’’ connector) or a ‘‘Y’’ cable.
Table 13–3 lists the StorageWorks-compatible adapter SCSI cables by function
(listed alphabetically).
Note
The length of all ‘‘–0B’’ ‘‘Y’’ adapter cables is 0.15 meters (6 inches).

13–8 StorageWorks SCSI Cables

Table 13–3 Selecting a ‘‘Y’’ SCSI Cable
To do this

Use this cable

Connect a 16-bit bus (operating in the 8-bit mode) ‘‘P’’ cable to a
50-pin low-density connector.

BN21P–0B
See Figure 13–11.

Connect a 16-bit bus (operating in the 8-bit mode) ‘‘P’’ cable
connector to a 50-pin, high-density connector, such as an
HSZ-series 8-bit controller connector.

BN21X–0B
See Figure 13–14.

Use with Sun Microsystems® or Hewlett-Packard® systems.

Connect a high-availability OSF™ configuration host cables, such
as an ULTRIX™ system, to a StorageWorks shelf.

BN21V–0B
See Figure 13–12.

Connect an OSF configuration host cables to a StorageWorks
shelf.

BN21Y–0B
See Figure 13–15.

Connect a second host cables to a KZTSA SCSI host adapter.

BN21W–0B
See Figure 13–13.

Remove an HSZ-series controller from the end-bus position
without interrupting the bus.

BN21P–0B
See Figure 13–11.

You must also use a 68-pin, differential, terminator block
(H879–AA).

As shown in Figure 13–10, you can adapt a 68-pin ‘‘P’’ cable to a 50-pin ‘‘A’’
connector simply by connecting a ‘‘Y’’ cable, 68-pin, female connector to the male
cable connector. By installing the differential terminator block in the other 68-pin
‘‘Y’’ cable connector, you now could disconnect the ‘‘Y’’ cable to the adapter without
interrupting the SCSI bus because the differential terminal block in the ‘‘Y’’ cable
now terminates the bus.

StorageWorks SCSI Cables

13–9

Figure 13–10 Typical ‘‘Y’’ Cable Connection

68-PIN
HIGH-DENSITY
CONNECTOR

50-PIN
CONNECTOR
68 CONDUCTOR
CABLE

"Y" CABLE

HSZ SERIES
CONTROLLER

ADAPTER
68-PIN
CONNECTORS
68-PIN
TERMINATOR

68-PIN
TERMINATOR
CXO-3587B-MC

Figure 13–11 BN21P–0B ‘‘Y’’ Cable Configuration

50-PIN
LOW-DENSITY
MALE

68-PIN
FEMALE
CONNECTORS

CXO-4007A-MC

13–10 StorageWorks SCSI Cables

Figure 13–12 BN21V–0B ‘‘Y’’ Cable Configuration

50-PIN
HIGH-DENSITY
MALE

50-PIN
LOW-DENSITY
FEMALE

CXO-4008A-MC

Figure 13–13 BN21W–0B ‘‘Y’’ Cable Configuration

68-PIN
HIGH-DENSITY
MALE

68-PIN
HIGH-DENSITY
FEMALE

CXO-4009A-MC

StorageWorks SCSI Cables

13–11

Figure 13–14 BN21X–0B ‘‘Y’’ Cable Configuration

50-PIN
HIGH-DENSITY
MALE

68-PIN
HIGH-DENSITY
FEMALE

CXO-4010A-MC

Figure 13–15 BN21Y–0B ‘‘Y’’ Cable Configuration

50-PIN
LOW-DENSITY
MALE

50-PIN
LOW-DENSITY
FEMALE

CXO-4011A-MC

13.7 H885–AA Trilink Connector Block
Table 13–4 lists the StorageWorks-compatible trilink connectors and terminators
and their uses.
Table 13–4 StorageWorks Trilink Connectors and SCSI Terminator Blocks
Order No.

Function

H879–AA

68-pin, SCSI, differential, terminator block for terminating SCSI ‘‘Y’’
cables, trilink connector blocks, and SCSI differential buses. Used to
enable the hot-swap method for replacing a controller without interrupting
the bus.
(continued on next page)

13–12 StorageWorks SCSI Cables

Table 13–4 (Cont.) StorageWorks Trilink Connectors and SCSI Terminator
Blocks
Order No.

Function

H885–AA

Trilink connector block used with the differential terminator block to
enable the hot-swap method for replacing an HSZ-series controller in
either the mid-bus or end-bus position

A trilink connector as shown in Figure 13–16 can be used in conjunction with an
H879–AA differential terminal block to permit replacing an HSZ-series controller
without disabling the bus.
The trilink connector has three 68-pin connectors—two female and one male.
The male connector is attached to the controller and the ‘‘P’’ cables, or a 68-pin,
differential, terminator block is attached to the female connectors.
Figure 13–16 H885–A Trilink Connector

REAR VIEW

FRONT VIEW
CXO-3851A-MC

See Figure 13–17 for a typical end-bus installation using a trilink connector. See
Figure 13–18 for a typical mid-bus installation.

StorageWorks SCSI Cables

13–13

Figure 13–17 HSZ-Series Controller—End-Bus Position

"P" CABLE
TRILINK
CONNECTOR
BLOCK
FEMALE
MALE

HSZ-SERIES
CONTROLLER

FEMALE

68-PIN
TERMINATOR
CXO-3632B-MC

Figure 13–18 HSZ Controller—Mid-Bus Position
"P" CABLE
TRILINK
CONNECTOR
BLOCK
FEMALE

MALE

HSZ-SERIES
CONTROLLER

FEMALE

"P" CABLE
CXO-3631B-MC

13–14 StorageWorks SCSI Cables

14
StorageWorks DSSI Cables
The process for selecting DSSI (DIGITAL standard system interface) cables is
basically the same whether or not the host system is a Digital system. You
must refer to the host system and controller documentation and determine the
following:
•

The DSSI adapter or controller type

•

The connector configuration (straight or right-angle)

For all host systems you must then calculate the maximum DSSI bus cable
length. This is the difference between the maximum DSSI bus length and the
total of the following:
•

The DSSI bus length between the host controller terminator and the host
controller cable connector

•

The DSSI bus length between the HSD-series controller cable connector and
the HSD-series controller DSSI terminator

Digital recommends that you select the shortest cable possible to connect the host
to the StorageWorks subsystem.
The HSD05 storage array controller SBB is connected to the host with one of
the DSSI cables listed in Table 14–1. The SBB 96-pin connector connects the
controller to the 8-bit wide, single-ended SBB shelf DSSI bus.

StorageWorks DSSI Cables

14–1

Table 14–1 Host System to StorageWorks DSSI Cables
Cable Description

Feet

Meters

Order No.

Use one of the following cables to connect an HSD05 storage array controller to:

DEC 4000 AXP Model 600 Distributed/Departmental Servers
 VAX 4000 Systems and Servers
A micro-ribbon cable with:
 One right-angle 50-pin micro-ribbon connector
 One straight 50-pin micro-ribbon connector

6
9
16
30
45
60

1.8
2.7
4.9
9.1
13.7
18.3

BC29R–06
BC29R–09
BC29R–16
BC29R–30
BC29R–45
BC29R–60

Use one of the following cables to connect an HSD05 storage array controller to:

DEC 7000 AXP Model 600 Data Center Servers with a KFMSB adapter.
 DEC 10000 AXP Model 600 Mainframe Class Servers with a KFMSB adapter.
 VAX 6000 Systems and Servers
A micro-ribbon cable with:
 One right-angle 50-pin micro-ribbon connector
 One straight 50-pin TAB connector

6
9
16
30
45
60

1.8
2.7
4.9
9.1
13.7
18.3

BC29S–06
BC29S–09
BC29S–16
BC29S–30
BC29S–45
BC29S–60

Table 14–2 lists the DSSI cables approved for interconnecting (‘‘daisy chaining’’)
HSD05 controllers, including the connectors, length, and order number.
Interconnecting HSD05 controllers requires a trilink connector (as shown in
Figure 14–1) and a terminator block.

14–2 StorageWorks DSSI Cables

Table 14–2 HSD05 Interconnecting DSSI Cables
Cable Description

Feet

Meters

Order No.

1.0
3.0

BC29T–03
BC29T–09

Use the following cable to connect the HSD05 tri-link connectors when:

One shelf is mounted in the front of the cabinet.
 One shelf is mounted in the rear of the cabinet.
 One shelf is mounted in the horizontal position.
 One shelf is mounted in the vertical position.
A micro-ribbon cable with:
 Two right-angle connectors

3
9

Use the following cable to connect the HSD05 tri-link connectors when both shelves are:

Mounted in the front of the cabinet.
or
Mounted in the rear of the cabinet.
 Mounted in the vertical position.
A micro-ribbon cable with:
 Two right-angle connectors

1.0

BC29T–03

1.0

BC29T–03

Use the following cable to connect the HSD05 tri-link connectors when:

Both shelves are mounted in the rear of the cabinet.
 One shelf is mounted in the horizontal position.
 One shelf is mounted in the vertical position.
A micro-ribbon cable with:
 Two right-angle connectors

Use the following cable to connect the HSD05 tri-link connectors when both shelves are:

Mounted in the front cabinet.
or
Mounted in the rear cabinet.
 Mounted horizontally adjacent to each other.
A micro-ribbon cable with:
 Two right-angle 50-pin micro-ribbon connectors
mounted facing opposite directions.

0.7

BC29U–02

StorageWorks DSSI Cables

14–3

Figure 14–1 HSD05 DSSI Trilink Connector

REAR VIEW

FRONT VIEW
CXO-3851A-MC

14–4 StorageWorks DSSI Cables

15
Designing a StorageWorks Subsystem
Designing a StorageWorks subsystem is a complex process that requires you to
consider many factors. This chapter contains examples of the steps involved in
configuring some of the more basic subsystems. To reduce the complexity of the
process, the examples are limited to subsystems that use the following:
•

HSZ10–AA disk array controller

•

BA350–Ex controller and SBB (StorageWorks building block) shelf

•

BA350–Sx SBB shelf

•

BA350–Kx deskside expansion unit with an ac distribution unit

•

120 Vac 60 Hz input power

15.1 Before You Begin
Before designing a StorageWorks subsystem, you should do the following:
1. Determine the storage requirements, to include the media, the storage
capacity, and so forth.
2. Determine the bus type and the device that will control the bus.
3. Select the SBBs, controllers, shelves, and enclosures listed in Part I that meet
your requirements.
4. Familiarize yourself with the configuration rules in Chapter 11 for the
preferred configuration.
5. Determine which SCSI (small computer system interface) cables, listed in
Chapter 12, are compatible with the preferred configuration, taking into
account the shelf bus length, bus speed (fast or slow), and cable length.
6. Study the configuration examples presented in the following sections.

Designing a StorageWorks Subsystem

15–1

15.2 StorageWorks Controller and SBB Shelf
An example of a single controller and SBB shelf with one HSZ10–AA disk array
controller is shown in Figure 15–1.
Figure 15–1 Typical StorageWorks Controller and SBB Shelf
CONTROLLER

BBU
POWER

0
POWER
AC
DISTRIBUTION

CXO-3634A-MC

Assumptions: The following assumptions have been made about this
configuration:
•

The user wants one HSZ10–AA disk array controller.

•

The HSZ10–AA disk array controller is operated from a KZESA adapter.

•

The user wants a battery backup unit (BBU) to maximize data integrity.

•

The user needs 4 GB of storage in a RAID 5 (Redundant Array of Independent
Disks, level 5) configuration.

•

The user wants the SBB shelf in deskside expansion enclosures.

•

The configuration will be used in France.

Storage Capacity: This configuration uses five disk drives. Four RZ26–VA disk
drives are used to meet the user’s storage requirements, providing 4.20 GB of
storage. Because RAID 5 configurations require n+1 disks, an additional (fifth)
disk drive is used to meet RAID requirements.
Enclosure: Two BA350–Kx deskside expansion enclosures.

15–2 Designing a StorageWorks Subsystem

SCSI Connections: In this example, two levels of SCSI connections must be
considered:
•

The first is the SCSI connection from the KZESA adapter to the HSZ10–AA
disk array controller.

•

The second is the SCSI connection from the controller and SBB shelf to the
SBBs.

The SCSI connection from the KZESA adapter to the HSZ10–AA disk array
controller is accomplished with a BN21K cable and a ‘‘Y’’ cable (described in
Chapter 12). A 68-pin terminator is also needed for this arrangement.
The controller and SBB shelf can accommodate up to six SCSI buses. Each
disk drive has its own separate SCSI bus from the HSZ10–AA controller. This
connection is made on the backplane.
Power Cord: A BN19W–2E power cord is used.
Parts Lists: The parts list for the controller and SBB configuration in this
example is as follows:
•

One BA350–Ex controller and SBB shelf

•

Two BA350–Kx deskside expansion enclosures

•

One HSZ10–AA disk array controller

•

Five RZ26–VA disk drives

•

Two BA350–HA ac input power supplies

•

One BA350–HC BBU

•

One BN21K–03 SCSI cable

•

One BN21P–0B ‘‘Y’’ cable

•

One H879–AA 68-pin terminator

•

One BN19W–2E Central Europe 220 V ac power cord (France)

Designing a StorageWorks Subsystem

15–3

15.3 Combination BA350–Ex and BA350–Sx StorageWorks
Subsystem
An example of a configuration that uses a controller and SBB shelf and a SBB
shelf is shown in Figure 15–2.
Figure 15–2 Typical Combination BA350–Ex and BA350–Sx StorageWorks
Subsystem
SCSI BUS
INPUT

CONTROLLER

1
2
3

1
BBU
POWER

POWER

AC
DISTRIBUTION

CXO-3635A-MC

Assumptions: The following assumptions have been made about the
configuration in this example:
•

The user wants one HSZ10–AA disk array controller.

•

The HSZ10–AA disk array controller is connected to a KZESA adapter.

•

The user wants a BBU for the RAID controller and redundant power for the
disks.

•

The user needs 9 GB of storage.

•

The user wants the SBB shelf in deskside expansion enclosures.

•

The system will be used in France.

Storage Capacity: The configuration in this example has a total of 10 RZ26–VA
disk drives, 5 in each shelf. These disks provide a total storage capacity of 10.5
GB: 9.45 GB to satisfy the user’s storage requirements, plus an additional disk to
satisfy the RAID 5 requirement of n+1 disks.
Enclosure: Three BA350–Kx deskside expansion enclosures.

15–4 Designing a StorageWorks Subsystem

SCSI Connections: In this example, two levels of SCSI connections must be
considered:
•

The first is the SCSI connection from the KZESA adapter to the HSZ10–AA
disk array controller.

•

The second is the SCSI connection from the controller and SBB shelf to the
SBB shelf.

The SBBs in the controller and SBB shelf are connected to the SCSI buses
internally, on the shelf backplane.

•

The SBB shelf is connected to the controller and SBB shelf with a BN21H–02
SCSI cable.

Power Cord: A BN19W–2E power cord is used. Only two power cords are
needed since the controller and SBB shelf can be powered from one ac distribution
unit.
Parts Lists: The parts list for this combination subsystem is as follows:
•

One BA350–Ex controller and SBB shelf

•

One BA350–Sx SBB shelf

•

Three BA350–Kx deskside expansion enclosures

•

One HSZ10–AA disk array controller

•

Ten RZ26–VA disk drives

•

Five BA350–HA ac input power supplies

•

One BA350–HC BBU

•

One BN21K–03 SCSI cable (for the HSZ10–AA disk array controller)

•

One BN21P–0B ‘‘Y’’ cable

•

One H879–AA 68-pin terminator

•

One BN21H–02 SCSI cable for the BA350–Sx SBB shelf

•

Two BN19W–2E Central Europe 220 V ac power cords (France)

Designing a StorageWorks Subsystem

15–5

A
StorageWorks Product Specifications
This appendix chapter describes the physical and environmental specifications for
the StorageWorks products. See the Digital Systems and Options Catalog for the
operating specifications for storage devices, controllers, and host computers.

A.1 Power
The input power requirements for a StorageWorks enclosure is a function of the
number of shelves, the enclosure power distribution units, the fans, and other
features. To accurately determine the input power requirements for a specific
configuration see the enclosure documentation.
Table A–1 lists the specifications for the StorageWorks power supplies.
Table A–1 StorageWorks Power Supply Specifications
Specifications

BA35X–HA

BA35X–HB

BA35X–HC

Power supply type

AC input

DC input

Battery backup

Input ac voltage range

90–264 V ac

N/A

Input dc voltage range

N/A

36–72 V dc

12 V dc†

AC input frequency
range

47–63 Hz

N/A

Nominal dc voltage
input

N/A

48 V dc

N/A

Auto-ranging feature

Yes

N/A

Output voltages

12 V dc
5 V dc

Output power

131 W

200 W peak for 16,
32, or 64 seconds
(user-selectable)

† Charging power from shelf power bus.

StorageWorks Product Specifications

A–1

A.2 Physical Specifications
Table A–2 lists the physical specifications of the cabinets, StorageWorks shelves,
and StorageWorks building blocks (SBBs).
Note
The depth specifications in Table A–2 do not include the service area
requirements, which are as follows:
•

The SW500-series and SW800-series cabinets require both a front and
a rear service areas of 762 millimeters (30 inches).

•

Deskside expansion enclosures are portable and should be positioned
to provide a front or rear service area of 762 millimeters (30 inches).

•

Desktop expansion enclosures do not require a service area.

Table A–2 StorageWorks Products Physical Specifications
Height
Description

Width
mm

Depth

Total Shelves

23.6
31.5
8.0
17.0

875
875
400
400

34.5
34.5
15.7
15.7

10
24
1
N/A

17.5
17.5
17.5
17.5

350
350
350
350

13.8
13.8
13.8
13.8

N/A
N/A
N/A
N/A

216
267

8.5
10.5

N/A
N/A

647

25.5

N/A

StorageWorks Enclosures
SW500-series data center cabinet
SW800-series data center cabinet
Deskside expansion enclosure
Desktop expansion enclosure

1070
1700
578
60

42.1
66.6
22.8
2.4

600
800
203
432

StorageWorks Shelves
BA350–EA controller and SBB shelf
BA350–LA SBB shelf
BA350–SA SBB shelf
BA350–MA controller shelf

300
150
150
150

11.8
5.9
5.9
5.9

445
445
445
445

StorageWorks Building Blocks
3½-inch SBB
5¼-inch SBB

121
121

4.8
4.8

51
152

2.0
6.0

Magnetic Tape Storage Subsystems
TZ867–VA/TZ877–VA

265

A–2 StorageWorks Product Specifications

10.4

222

8.7

A.3 Environmental Specifications
The StorageWorks product line environmental specifications listed in Table A–3
are the same as for other Digital storage devices.
Table A–3 StorageWorks Environmental Specifications
Condition

Specification
Optimum Operating Environment

Temperature
Rate of change
Step change

+18° to +24°C (+65° to +75°F)
3°C (5.4°F)
3°C (5.4°F)

Relative humidity

40% to 60% (noncondensing) with a step change of 10% or less
(noncondensing)

Altitude

From sea level to 2400 m (8000 ft)

Air quality

Maximum particle count .5 micron or larger, not to exceed 500,000
particles per cubic ft of air

Inlet air volume

.026 cubic m per second (50 cubic ft per minute)
Maximum Operating Environment (Range)

Temperature

+10° to +40°C (+50° to +104°F)
Derate 1.8°C for each 1000 m (1.0°F for each 1000 ft) of altitude
Maximum temperature gradient 11°C/hr (52°F/hr) ±2°C/hr
(36°F/hr)

Relative humidity

10% to 90% (noncondensing)
Maximum wet bulb temperature: 28°C (82°F)
Minimum dew point: 2°C (36°F)
Maximum Nonoperating Environment (Range)

Temperature
Relative humidity
Nonoperating
Altitude

–40° to +66°C (–40° to +151°F)
(During transportation and associated short–term storage)
8% to 95% in original shipping container (noncondensing);
otherwise, 50% (noncondensing)
From –300 m (–1000 ft) to +3600 m (+12,000 ft) MSL

StorageWorks Product Specifications

A–3

A.4 Environmental Stabilization
To make sure of the proper operation of Digital storage devices, the SBB
temperature must be within 18–29°C (65–85°F). Table A–4 specifies the time
required to thermally stabilize SBBs based on the ambient shipping temperature.
CAUTION
Always stabilize storage devices in the operating environment prior to
installation or operation. Otherwise, the media or associated electronics
may be damaged when power is applied to the unit.

If This Condition Exists

Then You Must

Condensation is visible on the outside of the
storage device

Stabilize the device and the SBB in the operating
environment for 6 hours or until the condensation is no
longer visible, whichever is longer. Do not insert the
storage device into the shelf until it is fully stabilized.

Condensation is not visible on the outside of the
storage device

Thermally stabilize the device for the amount of time
specified in Table A–4.

Table A–4 Thermal Stabilization Specifications
Ambient
Temperature
Range °C

Ambient
Temperature
Range °F

Minimum
Stabilization
Time

60 to 66
50 to 59
40 to 49
30 to 39
18 to 29
10 to 17
0 to 9
–10 to –1
–20 to –11
–30 to –21
–40 to –31

140 to 151
122 to 138
104 to 120
86 to 102
64 to 84
50 to 63
32 to 48
14 to 30
–4 to 12
–22 to –6
–40 to –24

3 hours
2 hours
1 hour
30 minutes
None
30 minutes
1 hour
2 hours
3 hours
4 hours
5 hours

A–4 StorageWorks Product Specifications

StorageWorks Glossary
ac distribution
The method of distributing ac power in a cabinet.
ac power supply
A power supply designed to produce dc power from an ac input.
adapter
A device that converts the protocol and hardware interface of one bus type
into that of another without changing the functionality of the bus. See signal
converter.
American National Standards Institute
See ANSI.
ANSI
American National Standards Institute. An organization that develops and
publishes electronic and mechanical standards.
array controller
A hardware/software device that facilitates communications between a host and
one or more devices organized in an array. The HSJ40 controller is an array
controller.
BA350–Mx controller shelf
The StorageWorks controller shelf used for HS-family controller modules, cache
modules, and shelf power units.
BA350–Sx SBB shelf
A StorageWorks shelf used for only power units and SBBs.
battery backup unit
See BBU
BBU
StorageWorks battery backup unit that extends power availability after the loss
of primary ac power or a power supply to protect against the corruption or loss of
data.
blower
An airflow device mounted in a StorageWorks shelf.

Glossary–1

cable distribution unit
See CDU.
carrier
A standard, StorageWorks shelf-compatible, plastic shell into which a device can
be installed. Sometimes called SBB carrier.
CDU
Cable distribution unit. The power entry device for StorageWorks center cabinets.
The unit provides the connections necessary to distribute ac power to cabinet
shelves and fans.
channel
The RAID Array 110 subsystem term for a SCSI bus.
CI bus
Digital’s computer interconnect bus using two serial paths, each with a transfer
rate of 70 Mb/s (8.75 MB/s).
cold swap
A method of device replacement that requires that power be removed from all
shelves in a cabinet. This method is used when conditions preclude the use of the
warm swap or hot swap methods.
configure-to-order
See CTO.
controller
A hardware/software device that facilitates communications between a host and
one or more devices.
controller shelf
A StorageWorks shelf designed to contain controller and cache memory modules.
CTO
Configure-to-order. The customer–specified options are installed at the factory.
DAT
Digital Audio Tape. A format for recording digital data on a cartridge tape.
data center cabinet
A generic reference to the large cabinets, such as the SW800 series, in which
StorageWorks components can be mounted.
data channel
An HSC interface between the disk drive or tape formatters and HSC data and
control memory.
deskside expansion unit
A pedestal enclosure designed to house one or two StorageWorks shelves in a
vertical position.

Glossary–2

DIGITAL Storage System Interconnect
See DSSI
DSSI
Digital’s storage system interconnect bus with an 8-bit data transfer rate of 4-5
MB/s.
dual cabinet power configuration
A cabinet ac power configuration in which two ac sources and two ac power
supplies are used to supply dc power to the cabinet’s SBB shelves.
dual porting (or dual access)
The ability of a disk or tape drive to be accessed by two controllers. All DSA
drives have a standard dual-port feature. DSA drives can be online to only one
controller at a time. However, they are able to disconnect themselves from a
failed controller (or be disconnected by a failing controller) and become available
for continued service through the other controller.
dual-redundant configuration
A controller configuration consisting of a primary and backup controller in one
controller shelf . If the primary controller fails, the backup controller assumes
control over the failing controller’s devices.
dual shelf power configuration
A cabinet ac power configuration in which one ac source and two ac power
supplies are used to supply dc power to the cabinet’s SBB shelves.
electromagnetic interference
See EMI
electrostatic discharge
See ESD
EMI
Electromagnetic interference. The impairment of a signal by an electromagnetic
disturbance.
ESD
Electrostatic discharge. The discharge of a potentially harmful static electric
voltage as a result of improper grounding.
factory-configured
These systems are configured at the factory and shipped to the customer ‘‘as is.’’
Customer–specified options are shipped with the system for on-site installation.
failover
Failover is the software process that takes place when one controller fails in a
dual-redundant configuration and the other controller takes over the devices of
the failed controller and services them to the host until or if the failed controller
comes back or is replaced.

Glossary–3

fan
An airflow device mounted in a StorageWorks cabinet.
fast, differential SCSI
See FD SCSI.
fast, wide, differential SCSI
See FWD SCSI.
FD SCSI
The fast, differential SCSI bus with an 8-bit data transfer rate of 10 MB/s.
See also FWD SCSI and SCSI.
field configured
Customer–specified options are installed on-site. The options can be ordered at
any time for field upgrades.
full-height device
A single device that occupies an entire 5.25 inch SBB carrier. StorageWorks
full-height devices have an order number suffix of ‘‘–VA’’.
FWD SCSI
The fast, wide, differential SCSI bus with a 16-bit data transfer rate of up to 20
MB/s.
See also FD SCSI and SCSI.
half-height device
A device that occupies half of a 5.25 inch SBB carrier. Two half-height devices
can be mounted in a 5.25 inch SBB carrier. The first half-height device is
normally mounted in the lower part of the carrier. The second device is normally
mounted in the upper part of the carrier.
Hierarchical Storage Controller
See HSC.
host
The primary or controlling computer to which a storage subsystem is attached.
hot swap
A method of device replacement whereby the complete system remains on line
and active during device removal and reinstallation. The device being removed or
reinstalled is the only device that cannot perform operations during this process.
HSC
Hierarchical Storage Controller. An intelligent mass storage server used on the
CI bus. Capable of supporting a total of eight disk and/or tape data channels,
the HSC is part of the System Interconnect Architecture and Digital Storage
Architecture. By performing as an I/O manager, the HSC can be classified as an
I/O server, removing the burden of I/O management from the CPU.

Glossary–4

qualified device
A device that has been fully tested in all appropriate StorageWorks hardware
and software configurations, and is in complete compliance with Digital and
country-specific standards (for example, FCC and TÜV).
radio frequency interference
See RFI.
RAID
Redundant array of independent disks. A set of storage techniques devised to
increase the performance and availability of a storage subsystem.
redundant array of independent disks
See RAID.
RFI
Radio frequency interference. The impairment of a signal by an unwanted radio
signal or radio disturbance.
SBB
StorageWorks building block. A device housed in a standard StorageWorks
SBB carrier. An SBB has a standard physical and electrical interface that is
compatible with those of StorageWorks shelves and enclosures.
SBB shelf
A StorageWorks shelf, such as the BA350-Sx, designed to house plug-in SBB
modules.
SCSI
Small Computer System Interface. An ANSI interface defining the physical and
electrical parameters of a parallel I/O bus used to connect hosts to a maximum
of seven devices. The StorageWorks device interface is implemented according to
the SCSI–2 standard, allowing the synchronous transfer of 8-bit data at rates of
up to 10 MB/s.
shelf brackets
Sheet metal components designed to attach and position StorageWorks shelves in
their associated enclosures.
signal converter
A device that converts the protocol and hardware interface of one bus type into
that of another without changing the functionality of the bus. See adapter.
Small Computer System Interface
See SCSI.
StorageWorks
Digital’s family of modular data storage products that allows customers to
design and configure their own storage subsystems. Components include power,
packaging, cabling, devices, controllers, and software. Customers can integrate
devices and array controllers in StorageWorks enclosures to form storage
subsystems.

Glossary–5

StorageWorks building block
See SBB.
supported device
A device tested as functionally compatible with an approved StorageWorks
hardware and software configuration.
warm swap
A controller function that allows devices to be added, removed, or replaced while
the subsystem remains operational. All activity on the device’s SCSI bus must
normally be halted for the duration of the warm swap operation.

Glossary–6

Index
A
‘‘A’’ cable
description, 13–3
ac input power supply
See power supply
AC power
power cords, 3–5
Adapters, 4–1

B
BA355–HA
See power supply
BA355–HB
See power supply
BA355–HC
See power supply
BA35X–HA ac input power supply
specifications, A–1
BA35X–HB dc power supply
specifications, A–1
BA35X–HC battery backup unit
specifications, A–1
Battery backup unit
BA35X–HC, A–1
BBU
See Battery backup unit
BC09D, 13–3
BN21H, 13–3

C
Cables
‘‘A’’ cable, 13–3
BC09D, 13–3, 13–4
BC10U, 13–5
BC29R, 14–2
BC29S, 14–2
BC29T, 14–3
BC29U, 14–3
BN21H, 13–3, 13–4
BN21K, 13–7
BN21L, 13–7
BN31A, 13–5
BN31B, 13–6

Cables (cont’d)
for shelves, 13–2
order numbers, 13–3, 13–7, 13–9, 14–2, 14–3
‘‘P’’ cable, 13–7
single-ended
See ‘‘A’’ cable, 13–3
transition cable
See special cable, 13–8
CD–ROM drives
5¼-inch, 2–7
Configuration
host computer, 7–1, 8–1, 9–1, 10–1
rules for deskside expansion units, 11–13
rules for desktop expansion unit, 11–14
rules for device addresses, 11–2
rules for power, 11–11
rules for SCSI bus, 11–4
rules for shelves, 11–3
rules for SW500 data center cabinets, 11–12
rules for SW800 data center cabinets, 11–12
StorageWorks, 7–1, 8–1, 9–1, 10–1
configurations
examples
BA350–Ex and BA350–Sx shelf
combination, 15–4
Configurations
examples
BA350–Ex single-shelf, 15–2
Controller
HSD30, 4–3
SW1000, 4–8
Controllers, 4–1
HSD05, 4–3
HSJ30, 4–2
HSJ40, 4–2
HSZ10, 4–6
HSZ15, 4–6
HSZ40, 4–2
K.scsi, 13–4
KZSMA, 13–5
PC4XR-series, 13–4
PMAZ-series, 13–4
Converters, 4–1

Index–1

dc input power supply
See power supply
Deskside expansion unit
configuration rules, 11–13
Device addresses, 11–2
Disk drives, 2–5
3½-inch, 2–5
5¼-inch, 2–5
DSSI cables, 14–1
DWZZA, 4–4

Magazine tape subsystems, 2–7
Modular carriers
See SBB kits

E
Environmental specifications, A–3
Environmental stabilization, A–4
EZ51R–VA
See Solid state disks 5¼-inch
EZ54R–VA
See Solid state disks 5¼-inch
EZ58R–VA
See Solid state disks 5¼-inch

F
Features
See StorageWorks
Filler panels
description, 6–1

H
Host computer system
configuration, 7–1, 8–1, 9–1, 10–1
HSC, 4–7
HSC95, 4–7
HSD05, 4–3
HSD30, 4–3
HSJ30, 4–2
HSJ40, 4–2
HSS9x, 4–7
HSZ10, 4–6
configuartion rules, 11–5
HSZ15, 4–6
configuration rules, 11–5
HSZ40, 4–2
configuration rules, 11–5

I
InfoServer SW1000, 4–8

Index–2

O
Optical disk drives
Optical disk drive
RWZ52–VA, 2–5

P
‘‘P’’ cable
description, 13–7
Physical specifications
cabinets, A–2
SBBs, A–2
shelves, A–2
TZ867–VA, A–2
TZ877–VA, A–2
Power, 11–11, A–1
Power supplies, 3–4
BA35X–HA, A–1
BA35X–HB, A–1
BA35X–HC, A–1
specifications, A–1
Power supply, 3–4
ac input, 3–4
dc input, 3–4

R
RAID
sample configurations, 15–2, 15–4
RRD42–VB
See CD–ROM drives 5¼-inch
RRD42–VE
See CD–ROM drives 5¼-inch
RRD42–VU
See CD–ROM drives 5¼-inch
RRD43–AA
See CD–ROM drives 5¼-inch
RRD43–VC
See CD–ROM drives 5¼-inch
RRD43–VE
See CD–ROM drives 5¼-inch
RRD43–VU
See CD–ROM drives 5¼-inch
RRD44–AA
See CD–ROM drives 5¼-inch
RRD44–VE
See CD–ROM drives 5¼-inch
RRD44–VU
See CD–ROM drives 5¼-inch

RWZ52–VA, 2–5
RZ25–VA
See Disk drives 3½-inch
RZ25L–VA
See Disk drives 3½-inch
RZ26–VA
See Disk drives 3½-inch
RZ26L–VA
See Disk drives 3½-inch
RZ28–VA
See Disk drives 3½-inch
RZ28B–VA
See Disk drives 3½-inch
RZ73–VA
See Disk drives 5¼-inch
RZ74–VA
See Disk drives 5¼-inch

S
SBB kits, 6–2
3½-inch Fixed Media, 6–2, 6–3
3½-inch Removable Media, 6–3
SBB shelves
configuration rules, 11–3
SBBs, 2–2
specifications, A–2
SCSI
‘‘A’’ cable, 13–3
configuration of buses, 11–4
end-bus position, 12–2
mid-bus position, 12–2
‘‘P’’ cable, 13–7
special cable, 13–8
terminating buses, 12–2
transition cable
See special cable, 13–8
SCSI bus
length, 12–3, 12–4
multiple SBB shelves, 12–4
single SBB shelf, 12–2
single shelf
single bus, 12–3
two buses, 12–3
two shelves
single bus, 12–4
SCSI bus signal converters, 4–4
Shelves, 3–3
BA350–LA, 3–3
BA350–MA, 3–3
BA350–SB, 3–3
cables for, 13–2
list of types, 1–4
physical specifications, A–2
Solid state disks
5¼-inch, 2–7

Specifications
environmental, A–3
StorageWorks
adapters, 4–1
configuration, 7–1, 8–1, 9–1, 10–1
controllers, 4–1
converters, 4–1
features, 1–2
specifications, A–1
physical, A–2
system components, 1–3
StorageWorks family
introducing, 1–1
StorageWorks products, 2–1, 3–1, 6–1
StorageWorks system
designing, 15–1
SW1000, 4–8
SW500 data center cabinets
configuration rules, 11–12
SW800 data center cabinets
configuration rules, 11–12
SWDCI, 4–8
SWXTE–VA
See Tape drives 3½-inch
System building blocks
See SBBs

T
Tape drives
3½-inch, 2–6
5¼-inch, 2–6
Temperature
ranges, A–4
Terminator block, differential
H879–AA, 13–9, 13–12
Thermal stabilization, A–4
TKZ09–VA
See Tape drives 5¼-inch
TLZ06–VA
See Tape drives 3½-inch
TLZ6L–VA
See Tape drives 3½-inch
See Tape drives 5¼-inch
Transition cables
description, 13–8
Trilink connector
H885–AA, 13–9, 13–12
TZ30–VE
See Tape drives 5¼-inch
TZ86–VA
See Tape drives 5¼-inch
TZ867–VA
See Magazine tape subsystems, 2–7

Index–3

TZ87–VA
See Tape drives 5¼-inch
TZ877–VA
See Magazine tape subsystems, 2–7
TZK10–VA
See Tape drives 3½-inch
TZK10–VU
See Tape drives 3½-inch
TZK11–VA
See Tape drives 5¼-inch
TZK11–VE

Index–4

See Tape drives 5¼-inch

Y
‘‘Y’’ cable
BN21P, 13–9
BN21U, 13–9
BN21V, 13–9
BN21W, 13–9
BN21X, 13–9
BN21Y, 13–9