Digital PDFs

AE-5677B-TC

May 1978

2 pages

Original

0.1MB

Document:	15.89.01 7806 PDP-1160 Microprogramming Tools
Order Number:	AE-5677B-TC
Revision:
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/15.89.01_7806_PDP-1160_Microprogramming_Tools.pdf

OCR Text

mamaomo

Software Product Description
PRODUCT NAME: PDP-11/60 Microprogramming Tools, Version 1

SPD 15.89.1

DESCRIPTION:
The PDP-11 160 Microprogramming Tools Software Kit
provides basic microcode development software including a microcode assembler and a microcode
loader for use with the user control store (UCS) option of the PDP-11/60 under the RSX-11 M operating
system.

ied, in whole or in part (with the proper inclusion of
the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.

The microcode assembler accepts micro instructions
and DIGITAL-supplied MACRO commands, which define the 11/60 microword. The micro assembler produces an absolute object module and a user listing.

The following key (E, T, V, Z) represents the distribution media for the product and must be specified at
the end of the order number, e.g., KU116-AE = binaries and sources on RK05 disk.

The microcode loader accepts an object module (created by the micro assembler) and a DIGITAL-supplied
object module (to provide a dispatch table and error
handling). It loads the writable control store of the
PDP-11/60.

E
T
V
Z

Sources are also included: They are written in
MACRO-11 and FORTRAN IV-PLUS for the micro assembler and loader.
MINIMUM HARDWARE REQUIRED:
Any valid RSX-11 M configuration with the PDP-11 /60
UCS option and a 64K byte partition for microcode
development.
OPTIONAL HARDWARE:
None
PREREQUISITE SOFTWARE:
RSX-11 M Real-time Operating System, Version 3 or
later.
TRAINING CREDITS:
None
SUPPORT CATEGORY:
C - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
No updates are planned for this product.

RK05 Disk Cartridge
RK06 Disk Cartridge
RK07 Disk Cartridge
No hardware dependency

Standard Options
KU116 -AEUser control store, single-use license,
binaries and sources, documentation,
no support services, distributed on
RK05 disk.
KU116 -ATUser control store, single-use license,
binaries and sources, documentation,
no support services, distributed on
RK06 disk.
KU116 -AVUser control store, single-use license,
binaries, and sources, documentation,
no support services, distributed on
RK07 disk
Miscellaneous Options
QR444 -GZDocumentation only

ADDITIONAL SERVICES:
QR444 -SZUCS Consulting Services (one week)

ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licensing provisions of DIGITAL's Standard Terms and Conditions of
Sale, which provide in part that the software and any
part thereof may be used on only the single CPU on
which the software is first installed, and may be cop-

June 1978

AE-5677B-TC

SPD 15.89.1

PDP-11/60 Microprogramming Tools, Version 1
-2-

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code correcti'ons, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.