Digital PDFs

AE-D354D-TC

September 1978

4 pages

Original

0.3MB

Document:	15.81.03 7809 Fortran Graphics Package 1.1
Order Number:	AE-D354D-TC
Revision:
Pages:	4
Original Filename:	http://bitsavers.org/pdf/dec/spd/15.81.03_7809_Fortran_Graphics_Package_1.1.pdf

OCR Text

mamaomo

Software Product Description
PRODUCT NAME: FORTRAN GRAPHICS PACKAGE, Version 1.1
DESCRIPTION:
The FORTRAN Graphics Package is a collection of
FORTRAN-callable routines for users of FORTRAN on
RT-11, RSX-11M, RSX-11D, lAS, or VAX/VMS operating systems who wish to use the graphics capabilities
of the VT55 terminal (not on VAX/VMS) and the VT11
or VS60 display processors. The package includes
two sets of routines: a PLOT55 routine for the VT55
graphics terminal, and DECgraphic-11 routines for
the VT11 and VS60 display processors.
PLOT55
The PLOT55 routine (not available for VAX systems)
is accessed by a FORTRAN CALL statement. The routine has four arguments that allow the user to construct two graphs, set their mode (histogram or pointplot), add vertical and/or horizontal grid lines and
manipulate graphics cursors (short vertical bars used
for coordinate identification). In multi-user systems,
several VT55 terminals can be in use simultaneously.
DECgraphic-11
The DECgraphic-11 package provides support for the
VT11 or VS60 display processors in either of two
ways:
• As a component of Iii satellite GT 41 or GT43 (for the
VT11), or GT62 (for the VS60) system. This "intelligent terminal" is connected to an RSX-11 M, RSX110, lAS, or VAX/VMS host system by a standard
asynchronous serial line terminal interface. The
number of satellite intelligent terminal subsystems
is limited only by the number of terminals that the
host system supports.
• As a peripheral on the PDP-11 UNIBUS. The package includes a device driver that allows operation
of one VT11 or one VS60 on an RT-11 or RSX-11 M
system configuration.

Over 60 routines are provided in the DECgraphic-11
package. They allow the FORTRAN programmer to
display, modify, and interact with graphic information
at the display console. Through CALL statements, the
user can display pOints, vectors, text, and graph data.
The subpicture feature enables the programmer to
display repeated images. Special graphic routines enable the programmer to display an entire array of
data with one subroutine call. General "attention handling" facilities for the light pen, LK11 push button
box, and LK40 keyboard are also included in the
package. Subroutines are available that enable the
programmer to display menus for light pen selection.

September 1978

SPD 15.81.3

Miscellaneous routines enable the programmer to
move, modify, delete, and otherwise manipulate images.
DECgraphic-11 also provides support for the special
hardware features of the VS60. The user can alter the
scale at which images and text strings are displayed,
"window" the display viewing area over a large "drawing area," and select output on an optional second
display scope of the VS60.
Most of the routines in the DECgraphic-11 package
are available on either the satellite or standard peripheral configurations. In satellite configurations, however, the programmer has the additional capability to
construct user-controlled programs in the satellite
processor. This permits "attention handling" and other simple tasks to be carried out without affecting the
host processor.
MINIMUM HARDWARE REQUIRED:
RT11 SUPPORT
• Any valid RT11 operating system configuration supporting FO RTRAN IV /RT -11 that includes:
1. A UNIBUS PDP-11 processor.
2. At least 32K bytes of memory .
3. An RL 11, RK11, or RK611 disk cartridge drive
with an additional disk drive, or one of the following magnetic tape systems (for software distribution):
TME11 controller with TE10 transport
TMB11 controller with TS03 transport.
FOR VT55 GRAPHICS TERMINAL SUPPORT
4. A VT55 graphics terminal with asynchronous
serial line interface (in place of the console terminal).
FOR VT11 OR VS60 DISPLA Y PROCESSOR SUPPORT AS A UNIBUS PERIPHERAL
5. A VT11 or VS60 display processor.

RSX-11M, RSX-11D, lAS SUPPORT
• Any valid RSX-11M, RSX-11D, or lAS operating
system configuration supporting either FORTRAN
IVIIAS-RSX or FORTRAN IV-PLUS that includes:
1. A UNIBUS PDP-11 processor.
2. At least 48K bytes of memory.

AE-D354D-TC

SPD 15.81.3

FORTRAN GRAPHICS PACKAGE, Version 1.1
-2-

3. An RL 11, RK11, or RK611 disk cartridge drive
and controller with an additional disk drive on
one of the controllers, or one of the following
magnetic tape systems (for software distribution):
TME11 controller with TE10 transport
TMB11 controller with TS03 transport
TJE16 (TUE16 for POP-11/70) controller with
TE16 transport.
FOR VT55 GRAPHICS TERMINAL SUPPORT
4. A VT55 graphics terminal with any asynchronous
serial line interface supported by the operating
system.
FOR VT11 OR VT60 DISPLA Y PROCESSOR SUPPORT AS A UNIBUS PERIPHERAL (RSX-11 M only)
5. A VT11 display processor (display file must reside in the lowest 56K bytes of memory), or
VS60 display processor.
6. Not more than 248K bytes of memory.
FOR VT11 or VS60 DISPLA Y PROCESSOR SUPPORT
AS A SA TELLITE SYSTEM
7. A DL 11 single-line asynchronous serial interface
or one line of a OZ11 or DH11 multiplexer for
each satellite system.

And one of the following display processor subsystems (satellite system must include FORTRAN IV
(QP230) if FORTRAN IV-PLUS is run on the host system):
8. For VT11 support, one of the following:
A GT41 or GT43 display processor subsystem.
A UNIBUS PDP-11 processor, 32K bytes of
memory, an asynchronouS' serial line interface
compatible with a DZ11, OL 11, or DH11, a programmer's processor console, an LA36 or LK40
terminal keyboard, and a VT11 display processor.
9. For VS60 support:
The GT62 display terminal system or equivalent.
VAX SUPPORT
• Any valid VAX/VMS operating system configuration
supporting VAX-11 FORTRAN IV-PLUS

For VT11 or VS60 Display Processor Support as a
Satellite System:
1. One line of a DZ11 asynchronous multiplexer for
each satellite system and one of the following
display processor subsystems:
2. For VT11 support, one of the following
A GT41 or GT43 display processor subsystem

A UNIBUS PDP-11 processor, 32K bytes of main
memory, an asynchronous serial line interface
compatible with a DZ11, OL 11 or DH11, a programmer's processor console, and LA36 or
LK40 terminal keyboard and a VT11 display processor.
For VS60 Support
The GT62 display terminal system or equivalent.

OPTIONAL HARDWARE:
VT11 or VS60 based satellite display processor subsystems support the RX11 floppy disk system for local storage and loading of display files.
PREREQUISITE SOFTWARE:
One of the following operating systems is required:
• RSX-11 M, Version 3.1, and either FORTRAN
IV IIAS-RSX, Version 2, or FORTRAN IV-PLUS, Version 2.5
• lAS, Version 2, and either FORTRAN IVIIAS-RSX,
Version 2, or FORTRAN IV-PLUS, Version 2.5
• RSX-11 D, Version 6.2, and either FORTRAN IVIIASRSX, Version 2, or FORTRAN IV-PLUS, Version 2.5

Note that if FORTRAN IV-PLUS is selected for RSX11 M, RSX-11 D, or lAS based host systems that
FORTRAN IV will also be required for the graphic satellite.
• RT -11, Version 3B, SJ or FB monitors, and
FORTRAN IV /RT -11, Version 2 or later
• VAX/VMS operating system, Version 1, and VAX-11
FORTRAN IV-PLUS, Version 1, and PDP-11
FORTRAN IV/VAX to RSX Cross Compiler.
OPTIONAL SOFTWARE:
None
TRAINING CREDITS:
None
SUPPORT CATEGORY:
B - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPO.
UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge (includes no installation). After the first year, updates, if
any, will be made available according to then prevailing DIGITAL policies.
ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licensing provisions of DIGITAL's Standard Terms and Conditions of
Sale, which provide in part that the software and any
part thereof may be used on only the single CPU on
which the software is first installed, and may be
copied, in whole or in part (with the proper inclusion
of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.

The following key (D, E, Q, T, V) represents the distribution media for the product and must be specified at
the end of the order number, e.g., QJ647-XD =
sources on 9-track magnetic tape.

FORTRAN GRAPHICS PACKAGE, Version 1.1

SPD 15.81.3
-3-

D
E
Q
T
V

9-track Magnetic Tape
RK05 Disk Cartridge
RL01 Disk Cartridge
RK06 Disk Cartridge
RK07 Disk Cartridge

Standard Options
For RT -11 Systems:
QJ647 -X- Single-use license, source license,
sources, documentation, support services (media: D, E, Q, T)

For RSX-11 M, RSX-11 D, or lAS systems:
QJ747 -X- Single-use license, source license,
sources, documentation, support services (media: D, E, Q, T)
For VAX systems:
QE747 -X- Single-use license, source license,
sources, documentation, support services (media: D, V)
Upgrade Options

For RSX-11M, RSX-11D, or lAS systems:
QJ748 -X- Single-use license, source license,
sources, documentation, support services (media: D, E, Q, T)
QJ748 -Y- Single-use license, source license,
sources, documentation, no support
services (media: D, E, Q, T)
Update Options:
Users of FORTRAN Graphics Package, Version 1,
whose specified Support Category warranty has expired may order under license the following software
update at the then current charge for such update.
The update is distributed in source or binary form on
the appropriate medium and includes no installation
or other services unless specifically stated otherwise.

For RT -11 Systems:
QJ647 -N- Sources update (media: D, E, Q, T)
For RSX-11M, RSX-11D, or lAS Systems:
QJ747 -N- Sources update (media: D, E, Q, T)

The following option is available as an upgrade kit
from RSX-11 M Graphics Extensions, Version 2, for
use on the same single CPU on which RSX-11 M
Graphics Extensions, Version 2, is licensed. The license previously granted for RSX-11 M Graphics Extensions, Version 2, shall be extended to cover this
upgrade.

Users of FORTRAN Graphics Package, Version 1,
whose specified Support Category warranty has not
expired may order under license the following software update for the then current media charge. The
update is distributed in source form on the appropriate medium and includes no installation or other services unless specifically stated otherwise.

This option is also available as an upgrade kit from
FORTRAN/RT -11 Extensions for use on the same single CPU on which FORTRAN/RT -11 Extension is licensed.
The
license
previously granted for
FORTRAN/RT -11 Extensions shall be extended to
cover this upgrade.

For RT -11 Systems:
QJ647 -V- Sources update (media: D, E, Q, T)

For RT -11 Systems:
QJ648 -X- Single-use license, source license,
sources, documentation, support services (media: D, E, Q, T)
QJ648 -Y- Single-use license, source license,
sources, documentation, no support
services (media: D, E, Q, T)

For RSX-11M, RSX-11D, or lAS System:
QJ747 -V- Sources update (media: D, E, Q, T)
ADDITIONAL SERVICES:
None

FORTRAN GRAPHICS PACKAGE, Version 1.1

SPD 15.81.3
-4-

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicat,es is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. &oftware Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.