Digital PDFs

AE-HO35A-TK

May 1978

2 pages

Original

0.1MB

Document:	15.52.00 7808 Electrostatic Plotter Utilities
Order Number:	AE-HO35A-TK
Revision:
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/15.52.00_7808_Electrostatic_Plotter_Utilities.pdf

OCR Text

momoomo

Software Product Description
PRODUCT NAME: ELECTROSTATIC PLOTTING UTILITIES, Version 1.0
DESCRIPTION:
This software product provides the necessary I/O device drivers for the Versatec Electrostatic Printer Plotters to run on either the RSX-11 M or VAX/VMS operating systems. The product permits use of the Versaplot™ software, available from Versatec. The 1/0
device drivers require the Versatec Model 121 DMA
UNIBUS interface.
Versaplot'M is a trademark of the Versatec Corporation.

MINIMUM HARDWARE REQUIRED:
One of the following:
• Any valid RSX-11 M Version 3.1 or later system configuration
• Any valid VAX/VMS Version 1 or later system configuration
Also required:
• 5K blocks of disk storage
• 4K bytes of main memory
The following hardware is also required, and must be
purchased from Versatec Corporation:
• Versatec Model 121 DMA UNIBUS controller
• Any model (8 1/2" to 72" wide) Versatec Printer /Plotter

OPTIONAL HARDWARE:
VRC (Vector-to-Raster Converter) option box. The
VRC, which may be obtained from Versatec, attaches
physically between the model 121 UNIBUS interface
and the printer/plotter, and is transparent to the software utilities described in this SPD.
PREREQUISITE SOFTWARE:
For RSX-11 M systems:
• RSX-11M, Version 3.1 or later operating system,
and one of the following language processors:
1. FORTRAN IV /IAS-RSX, Version 2 or later
2. PDP-11 FORTRAN IV-PLUS, Version 2.5 or later
For VAX/VMS systems:
• VAX/VMS, Version 1 or later
• VAX-11 FORTRAN IV-PLUS, Version 1 or later
Also required, for either system, is the Versaplot™
software, which must be acquired from Versatec Corporation.

August 1978

SPD 15.52.0

OPTIONAL SOFTWARE:
None
TRAINING CREDITS:
None
SUPPORT CATEGORY:
C - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge (includes no installation). After the first year, updates, if
any, will be made available according to then prevailing DIGITAL policies.
ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under· the licensing
provisions of DIGITAL's Standard Terms and Conditions of Sale, which provide in part that the software
and any part thereof may be used on only the single
CPU on which the software is first installed, and may
be copied, in whole or in part (with the proper inclusion of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only. for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.
The following key (D, a, V) represents the distribution
media for the product and must be specified at the
end of the order number, e.g., aS052-YD = sources
on 9-track magnetic tape.
D
9-track Magnetic Tape
a = RL01 Disk Cartridge
V = RK07 Disk Cartridge
Standard Options
aS052 -Y- Single-use license, source license,
sources, documentation, no support
services (media: D, a, V)

ADDITIONAL SERVICES:
None

AE-H035A-TK

ELECTROSTATIC PLOTTING UTILITIES, Version 1.0

SPO 15.52.0

-2ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software servic:;e facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installatlon, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'a~ is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.