Digital PDFs

AE-H171C-TC

June 1980

2 pages

Original

0.1MB

Document:	15.49.02 8006 RT-11 Fortran MINC Enhancement
Order Number:	AE-H171C-TC
Revision:
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/15.49.02_8006_RT-11_Fortran_MINC_Enhancement.pdf

OCR Text

~DmDDmD

Software Product Description
PRODUCT NAME: RT -11/FORTRAN Enhancement Package for MINe,
Version 1.1

DESCRIPTION:
The RT-11/FORTRAN Enhancement Package for
MINC is a complete FORTRAN Systems Software
Package. It consists of seven components:
• RT-11, Version 4.0 Real-Time Operating System
(Refer to SPO No. 12.1 for specifics)
• FORTRAN IV/RT-11, Version 2.5 CompHer and
Run-Time System (Refer to SPO No. 12.10 for
specifics)
• SSP-11, Version 1.2 Scientific Subroutines Package
(Refer to SPO No. 15.45 for specifics)
• LSP-11, Version 1.1 Laboratory Subroutine Package (Refer to SPO No. 15.44 for specifics)
• FDT -

FORTRAN Debugging Technique

• INSTRUMENT Bus Subroutines, Version 1.1 library for the control of IEEE-488 bus instruments.
(Refer to SPO No. 12.14 for specifics) The Extended
Memory (XM) monitor cannot be used while the
instrument bus routines are being used.
• Real-Time control library for MNC-series modules
(REAL-11/MNC)
SSP-11 supplies over 100 subroutines written in FORTRAN IV that provide the user with a large crosssection of those mathematical and statistical routines
commonly required in scientific applications.
LSP-11 Processing Capabilities:
•
•
•
•
•
•
•
•

Peak processing
Envelope processing
Interval histogramming
Interval histogramming with reference points
Fast fourier transform
Phase angle and amplitude spectrum analysis
Power spectrum analysis
Correlation (auto/cross) functions

FOT enables users at the console terminal to "debug"
their FORTRAN programs at the FORTRAN level. FDT
provides step-by-step control of execution of the program and the ability to examine and change the contents of any variable during program execution.
Instrument Bus Subroutines allow the user to control
the IEEE Bus through commands that control data
transfer via the I B11 or IBV11-A.
REAL-11/MNC library provides subroutines that control the following MNC-series modules:

June 1980

SPD 15.49.2

• MNCKW (programmable real-time clock)
• MNCAD (A/O converter)
• MNCAM (analog multiplexer)
• MNCAG (analog preamplifier)
• MNCAA (0/ A converter)
• MNCOI (digital input)
• MNCOO (digital output)
This library provides multiple-buffered input and output sweeps (of analog or digital data) with FORTRAN
completion routine support. Both post-stimulus and
time interval histogram data can be acquired by a subroutine. The library is self-configuring for the particular set of devices in the user's configuration.
The PLOT55 subroutine is included within RT-11 and
supports a VT105 operating in VT55 compatibility
mode. It is capable of plotting two single-valued functions with a resolution of 512 points on the X-axis and
190 points on the V-axis in either point-plot or histogram mode.
MINIMUM HARDWARE REQUIRED:.
Any valid MNC11-B, MNC11-C, MNC11-E, MNC11-J,
MNC11-K, MNC11-L, MOL23-A, MOL23-8, or MDL23C configuration.
OPTIONAL HARDWARE:
• Any Q-Bus disks supported by RT-11, Version 4.0
• Any Q-Bus line printer supported by RT-11, Version
4.0
Terminals
• Any terminal type supported by RT-11, Version 4.0
Communication Device
• Any Q-Bus devices supported by RT -11, Version 4.0
MODULE

DESCRIPTION

MNCKW

Programmable
Real-Time Clock
AID Converter
Dual Multiplexer
Preamplifier
01 A Converter
Digital Input
Digital Output

MNCAD
MNCAM
MNCAG
MNCAA
MNCDI
MNCDO

MAXIMUM NUMBER

7*
5*

8
8
8

*MNCAD required

NOTE: The maximum number of MNC-series modules
in use at anyone time is eight.

AE-H171C-TC

RT-11/FORTRAN Enhancement Package for MINC, Version 1.1

SPD 15.49.2

-2-

Miscellaneous
Seven additional IBV11-A options (subject to slot
availability).
NOTE: The software can communicate through only
one unit at a time.
PREREQUISITE SOFTWARE:
None
OPTIONAL SOFTWARE:
Any software that uti I izes the RT-11 0 perati ng System,
Version 4.0.
TRAINING CREDITS:
None

the terms and conditions of a separate Software Program Sources License Agreement between Purchaser
and DIGITAL.
Options with no support services are only available
after the purchase of one supported license.
A single-use license only option is a-license to copy the
software previously obtained under license.
The following key (H, a, x, Z) represents the distribution media for the product and must be specified at the
end of the order number, e.g., aJV32-Aa = binaries on
RL01 Disk Cartridge.
H =
a =
X =
Z =

RL02 Disk Cartridge
RL01 Disk Cartridge
RX02 Double Density Diskette
No hardware dependency

This is a complete FORTRAN software package and
contains standard software kits but the training credits
for RT -11 IFORTRAN Enhancement Package for M I NC
are determined solely by this SPD.

The following options are available as software enhancement products for MINC systems.
aJV32

SUPPORT CATEGORY:
DIGITAL SUPPORTED
RT-11/FORTRAN Enhancement Package for MINC is
a DIGITAL Supported Software Product.

-A- Single-use license, binaries, documentation, support services (media: H, a, X)

OJV32

-C- Single-use license, binaries, documentation, no support services (media: H, a,

L
SOFTWARE INSTALLATION:
DIGITAL INSTALLED
DIGITAL installation is required for Software Product
Support. There is no charge for installation if per- ,
formed at the time of system installation. DIGITAL
installed software products, except for operating systems, are subject to an add-on installation fee when
purchased subsequent to system installation.

SOFTWARE PRODUCT SUPPORT
RT-11/FORTRAN Enhancement Package for MINC
includes standard warranty services as defined in the
Software Support Categories Addendum of this SPD.
ORDERING INFORMATION:
All binary licensed software, including any subsequent
updates, is furnished under the licensing provisions of
DIGITAL's Standard Terms and Conditions of Sale,
which provide in part that the software and any part
thereof may be used on only the single CPU on which
the software is first installed, and may be copied, in
whole or in part (with the proper inclusion of the
DIGITAL copyright notice and any DIGITAL proprietary notices on the software) only for use on such CPU.
All source licensed software is furnished only under

X)
OJV32

-D- Single-use license only, no binaries, no
documentation, no support services
(media: Z) .

Update Options
Users of RT-11/FORTRAN Upgrade Package for
MINC-11 or users of FEP-11/FORTRAN Enhancement
Package whose specified Support Category warranty
has expired may order under license the following
software update at the then current charge for such
update. The update is distributed in binary form on the
appropriate m~dium and includes no installation or
other services unJess specifically stated.
OJV32

-H- Binaries, documentation (media: H, a,
X)

OJV32

-H- Right to copy for single-use (under existing license), no binaries, no documentation (media: Z)

Miscellaneous Options
OJV32

-G- Documentation only kit (media: Z)

ADDITIONAL SERVICES:
Post-warranty Software Product Services for this software product are available with the prerequisite being
the purchase of the RT-11 Self-Maintenance Service
for Software. Customers should contact their local
DIGITAL office for additional information.