Digital PDFs

AE-H171A-TC

October 1978

2 pages

Original

0.1MB

Document:	15.49.00 7810 RT-11 Fortran MINC Upgrade
Order Number:	AE-H171A-TC
Revision:
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/15.49.00_7810_RT-11_Fortran_MINC_Upgrade.pdf

OCR Text

momoomo

Software Product Description
PRODUCT NAME: RT-11/FORTRAN Upgrade Package for MINC-11,
Version 1

SPD 15.49.0

DESCRIPTION:
The RT-11/FORTRAN Upgrade Package for MINC-11
is a complete FORTRAN software package.

NOTE:
The maximum number of MNC-series
modules in use at anyone time is eight.

It consists of three standard software kits:
• RT -11, Single-User Operating System, Version 03B
• FORTRAN-IV, Version 2.1
• FEP-11, FORTRAN Enhancement Package, Version
1

Miscellaneous:
Seven additional IBV11-A options (subject to slot
availability)

The FEP-11 kit consists of six components:
1. (SSP-11) Scientific Subroutine Package
2. (LSP-11) Laboratory Subroutine Package
3. (FDT) FORTRAN Debugging Technique
4. (PLOT 55) Video graphics control subroutine
5. IBV11-A support library for the control of IEEE488 bus instruments
6. Real-Time control library for MNC-series modules (REAL-11 /MNC)
MINIMUM HARDWARE REQUIRED:
MNC11-B or MNC11-C
The MNC11-B or MNC11-C represents the total minimum configuration that is a prerequisite for the RT -11
FORTRAN package.
OPTIONAL HARDWARE:
• 60K Bytes
• Any disks su p ported by RT -11, Version 03B
• Any line printer supported by RT-11 Version 03B or
MINC/BASIC

Terminals
• Any terminal type supported by RT -11 Version 03B
or MINC/BASIC
Communication Device
• Any Q-Bus devices supported by RT -11 Version
03B
MAXIMUM NUMBER
MODULE DESCRIPTION
MNCKW programmable
2
real-time clock
4
A/D Converter
MNCAD
7 per MNCAD
MNCAM dual multiplexer
2 per MNCAM
preamplifier
MNCAG
1 per MNCAD
8
0/ A converter
MNCAA
8
digital input
MNCDI
8
digital output
MNCDO

October 1978

PREREQUISITE SOFTWARE:
MINC/BASIC, Version 1 (for support of the LA3S line
printer)
OPTIONAL SOFTWARE:
Any software which utilizes the RT-11 Version 03B
Operating System.
TRAINING CREDITS:
None
SUPPORT CATEGORY:
A - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge (includes no installation). After the first year, updates, if
any, will be made available according to then prevailing DIGITAL policies.
ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licenSing provisions of DIGITAL's Standard Terms and Conditions of
Sale, which provide in part that the software and any
part thereof may be used on only the single CPU on
which the software is first installed,. and may be
copied, in whole or in part (with the proper inclusion
of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.

AE-H171 A-TC

RT-11/FORTRAN Upgrade Package for MINC-11, Version 1

SPD 15.49.0

-2-

Standard Options
The following option is available as an upgrade kit
from MINC/BASIC Version 1, etc.
QJV32 AX Single-use license, binaries, documentation, support service
ADDITIONAL SERVICES:
None

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or e in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a'designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or e, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (Te) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORye
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.