Digital PDFs

AE-3413C-TC

August 1978

4 pages

Original

0.2MB

Document:	15.45.04 7808 SSP-11 1.1
Order Number:	AE-3413C-TC
Revision:
Pages:	4
Original Filename:	http://bitsavers.org/pdf/dec/spd/15.45.04_7808_SSP-11_1.1.pdf

OCR Text

~DmDDmD

Software Product Description
PRODUCT NAME: SSP-11, Version 1.1, PDP-11 Scientific Subroutine Package
DESCRIPTION:
The Scientific Subroutine Package is a collection of
over 100 mathematical and statistical routines commonly required in scientific programming. The subroutines are written in FORTRAN and contain no I/O
statements.
The algorithm used in each routine was selected on
the basis of (1) minimum storage, (2) accuracy of the
implementation (which was determined by its past
history, among other factors), and (3) speed of execution. In certain cases, these criteria were conflicting
and speed of execution was considered important.
Many of the larger statistical routines are provided as
a collection of several smaller routines. This enables
easier incorporation in larger programs requiring
overlays.
Among the SSP-11 subroutines are the following:
ABSNT
ARRAY
AUTO
AVCAL
AVDAT
BESI
BESJ
BESK
BESY
BOUND
CADD
CANOR
CCPY
CCUT
CEL1
CEL2
CHISQ
CINT
CORRE
CROSS
CS
CSRT

August 1978

detection of missing data
vector storage double dimensioned
storage conversion
autocovariances
AN D operation
data storage aliocaUon
I Bessel function
J Bessel function
K Bessel function
Y Bessel function
selections of observations within
bounds
add column of one matrix to column
of another matrix
canonical correlation
copy column of matrix into vector
partition column-wise
elliptic integrals of the first kind
elliptic integrals of the second kind
CHI square test for a contingency table
interchange two columns
means, standard deviations, and
correlations
cross covariances
Fresnel integrals
sort matrix columns

CSUM
CTAB
CTIE
DCLA
DCPY
DISCR
DMATX
EIGEN
EXPI
EXSMO
FORIF
FORIT
GAMMA
GAUSS
GDATA
GMADD
GMPRD
GMSUB
GMTRA
GTPRD
KRANK
LEP
LOAD
LOC
MADD
MATA
MCPY
MEANQ
MFUN
MOMEN
MPRD
MSTR
MSUB
MTRA
MULTR
NROOT

SPD 15.45.4

sum the columns of a matrix
tabulate the columns of a matrix
adjoin two matrices column-wise
replace diagonal with scalar
copy diagonal of matrix into vector
discriminant functions
means and dispersion matrix
eigenvalues and eigenvectors of a
real, symmetric matrix
exponential integral
triple exponential smoothing
Fourier analysis of a given function
Fourier analysis of a tabulated function
gamma function
normal random numbers
data generation
add two general matrices
product of two general matrices
subtract two general matrices
transpose of a general matrix
transpose product of two general
matrices
Kendall rank correlation
Legendre polynomial
factor loading
location in compressed-stored matrix
add two matrices
transpose product of matrix by itself
matrix copy
mean square operation
matrix transformation by function
first four moments
matrix product (row into column)
storage conversion
su btract two matrices
transpose a matrix
multiple regression and correlation
eigenvalues and eigenvectors of a
special nonsymmetric matrix

AE-3413C-TC

SPD 15.45.4

SSP-11, Version 1.1
-2-

ORDER
PADD
PADDM
PCLA
PLCD
PDER
PDIV
PILD
PINT
PGCD
PMPY
PNORM
POLRT
PSUB
PQSD
PVAL
PVSUB
QATR

QSF
QTEST
RADD
RCPY
RANK
RECP
RCUT
RKGS

RINT
RK2

RK1
RSUM
RTAB
RSRT
RTMI
RTIE
RTWI

rearrangement of integer correlations
add two polynomials
multiply polynomial by constant and
add to another polynomial
replace one polynomial by another
complete linear synthetic division
derivative of a polynomial
divide one polynomial by another
evaluate polynomial and its first derivative
integral of a polynomial
greatest common divisor of two polynomials
multiply two polynomials
normalize coefficient vector of polynomial
real and complex roots of a real
polynomial
subtract one polynomial from another
quadratic synthetic division of a polynomial
value of a polynomial
substitute variable of polynomial by
another polynomial
integral of a given function by trapezoidal rule using Romberg's extrapolation method
integral of equidistantly tabulated
function by Simpson's Rule
Cochran Q-test
add row of one matrix to row of
another matrix
copy row of matrix into vector
rank observations
reciprocal function for MFUN
partition by row
solution of a system of first order
differential equations with given initial values by the Runge-Kutta
method
interchanges two rows
tabulated integral of first order differential equation by Runge-Kutta
method
integral of first-order differential
equation by Runge-Kutta method
sum the rows of a matrix
tabulate the rows of a matrix
sort matrix rows
determine root within a range by
Mueller's iteration
adjoin two matrices row-wise
refine estimate of root by Wegstein's
iteration

RTNI
SCLA
SADD
SDIV
SCMA
SICI
SIMa
SMO
SMPY
SANK
SRMA
SSUB
SUBMX
SUBST
TAB1
TAB2
TALLY
TPRD
TRACE
TTSTT
TWOAV
UTEST
VARMX
WTEST
XCPY

refine estimate of root by Newton's
iteration
matrix clear and add scalar
add scalar to matrix
matrix divided by a scalar
scalar multiply column and add to
another column
sine/cosine integral
solution of simultaneous linear algebraic equations
of filter coefficients
application
(weights)
matrix multiplied by a scalar
Spearman rank correlation
multiply a row by a scalar and add
to another row
subtract scalar from matrix
build subset matrix
subset selection from observation
matrix
tabulation of data (one variable)
tabulation of data (two variables)
totals, means, standard deviations,
minimums, and maximums
transpose product
cumulative percentage of eigenvalues
tests on population means
Friedman 2-way analysis of variance
Mann-Whitney U-test
varimax rotation
Kendall coefficient of concordance
copy submatrix from given matrix

MINIMUM HARDWARE REQUIRED:
• Any valid RT -11 operating system configuration
supporting FORTRAN IV/RT-11
• Any valid RSX-11 M operating system configuration
supporting
either
FORTRAN
IV /IAS-RSX or
FORTRAN IV-PLUS
OPTIONAL HARDWARE:
None
PREREQUISITE SOFTWARE:
• RSX-11M, Version 3.1, and either FORTRAN
IV /IAS-RSX, Version 2, or FORTRAN IV-PLUS, Version 2.5
• RT -11, Version 3 and FORTRAN IV /RT -11, Version
2
OPTIONAL SOFTWARE:
None
TRAINING CREDITS:
None
SUPPORT CATEGORY:
B - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.

SSP-11, Version 1.1

SPD 15.45.4
-3-

UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge (includes no installation). After t~e first year, updates, if
any, will be made available according to then prevailing DIGITAL policies.
ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licensing
provisions of DIGITAL's Standard Terms and Conditions of Sale, which provide in part that the software
and any part thereof may be used on only the single
CPU on which the software is first installed, and may
be copied, in whole or in part (with the proper inclusion of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.
A single-use license only option is a license to copy
the software previously obtained under license, and
use such software in accordance with DIGITAL's
Standard Terms and Conditions of Sale. The category
of support applicable to such copied software is Category C.
The following key (D, E, Q, T, Y, Z) represents the
distribution media for the product and must be specified at the end of the order number, e.g., QJ960-AD
= binaries on 9-track magnetic tape.
D
E
Q
T
Y
Z

9-track Magnetic Tape
RK05 Disk Cartridge
RL01 Disk Cartridge
RK06 Disk Cartridge
RX01 Floppy Diskette
No hardware dependency

Standard Options
For RT-11 Systems:
QJ960 -A- Single-use license, binaries, documentation, support services (media: D, E, Q,
T, Y)
QJ960 -D- Single-use license only, no binaries, no
documentation, no support services
(media: Z)
For RSX-11 M Systems:
QJ962 -A- Single-use license, binaries, documentation, support services (media: D, E, Q,
T, Y)
QJ962 -D- Single-use license only, no binaries, no
documentation, no support services
(media: Z)

Update Options
Users of SSP-11 whose specified Support Category
warranty has expired may order the following software update at the then current charge for such update, for use under the existing license. Except where
the medium is designated as Z, the update is distributed in source or binary form on the appropriate medium. A software update where the medium is
designated as Z grants the user of SSP-11 the right to
copy the previously ordered QJ960-H or QJ960-W
software update for use on an additional single CPU
for which an SSP-11 license has been obtained. No
installation or support services are included unless
specifically stated otherwise.
QJ960 -H- Binaries, documentation (media: D, E,

Y)
QJ960

-H- Right to copy for single use (under existing license), no binaries, no documentation, no support services (media:

Z)
Users of SSP-11 whose specified Support Category
warranty has not expired may order under license the
following software update for the then current media
charge. The update is distributed in binary form on
the ~ppropriate medium and includes no installation
or other services unless specifically stated otherwise.
QJ960 -W- Binaries, documentation (media: D, E,

Y)
ADDITIONAL SERVICES:
None

SSP-11, Version 1.1

SPD 15.45.4

-4ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' baSis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current-unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' baSis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.