Digital PDFs

AE-D722A-TC

May 1978

2 pages

Original

0.1MB

Document:	14.60.00 7805 TRAX COBOL
Order Number:	AE-D722A-TC
Revision:
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/14.60.00_7805_TRAX_COBOL.pdf

OCR Text

mamaomo

Software Product Description
PRODUCT NAME: TRAX/COBOL, Version 1

SPD 14.60.0

DESCRIPTION:
COBOL is a precise, well defined language for business data processing. TRAX/COBOL is properly defined as a subset of full ANSI COBOL and meets the
ANSI-74 (x3.23-1974) low level specifications with the
following additions (+) and omissions (-):

PREREQU ISITE SOFTWARE:
TRAX Version 1

Full Level 2 Nucleus Module

TRAINING CREDITS:
None

Full Level 2 Table Handling Module

Full Level 2 Sequential 110 Module

Full Level 2 Relative 1/0 Module

Full Level 2 Indexed 1/0 Module

Full Level 2 Segmentation Module

Full Level 2 Library Module, with partial
Level 2 REPLACING facility

Full Level 1 Interprogram Communication
Module
Cross Reference Compilation Listing

DISPLAY with NO ADVANCING
RERUN option in I/O-CONTROL paragraph not implemented

The TRAX/COBOL product includes:
• COBOL compiler and run-time system
• RFRMT source program reformat utility
• CBLMRG COBOL ODL merge utility
• Language extension for record locking

MINIMUM HARDWARE REQUIRED:
Any valid TRAX configuration
An additional 24K bytes is required for concurrent
use with TRAX/BASIC-PLUS-2.
At least 3000 free blocks of on-line disk storage.

OPTIONAL HARDWARE:
Supports any mass storage or terminal device supported by the prerequisite software.

May 1978

OPTIONAL SOFTWARE:
None

SUPPORT CATEGORY:
A - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge
(includes no installation). After the first year, updates,
if any, will be made available according to then prevailing DIGITAL policies.
ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licensing provisions of DIGITAL's Standard Terms and Conditions of
Sale, which provide in part that the software and any
part thereof may be used on only the single CPU on
which the software is first installed, and may be copied, in whole or in part (with the proper inclusion of
the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.
Standard options with no support services are only
available after the purchase of one supported license.
When a software license is ordered without su pport
services, the category of support applicable to such
software is Category C.
A single-use license only option is a license to copy
the software previously obtained under license, and
use such software in accordance with DIGITAL's
Standard Terms and Conditions of Sale. The category
of support applicable to such copied software is Category C.

AE-D722A-TC

SPD 14.60.0

TRAX/COBOL, Version 1
-2The following key (M, Z) represents the distribution
media for the product and must be specified at the
end of the order number, e.g., QP402-AM = binaries
on 9-track magnetic tape 1600 bpi.
M = 1600 bpi 9-track Magnetic Tape
Z = No hardware dependency

Standard Options
QP402 -AMSingle-use license, binaries, documentation, support services

QP402

-CMSingle-use license, binaries, documentation, no support services
-DZSingle-use license only, no binaries, no
documentation, no support services

ADDITIONAL SERVICES:
None

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the currp-nt release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.