Digital PDFs

AE-3404C-TC

May 1978

2 pages

Original

0.1MB

Document:	14.15.02 7807 COGO-11
Order Number:	AE-3404C-TC
Revision:
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/14.15.02_7807_COGO-11.pdf

OCR Text

mamaomo

Software Product Description
PRODUCT NAME: COGO-11, Version 1A, Coordinate Geometry Program
DESCRIPTION:
COGO is a tool for solving problems in plane coordinate geometry through the use of a computer program with a geometrically oriented language. COGO11 executes an RSX-11M, RSX-11D, or lAS operating
system. It uses many subprograms to operate on the
coordinate table, a common set of up to 9999 pOints.
The COGO language is the part of the tool that the
user works with directly. Most of the COGO-11 command names and command codes are identical with
those of SELLS COGO and include:
• Control commands - to start and end a COGO
job, and chang.e the I/O devices
• 'Commands for maintaining tables (lists of related
points such as road alignments or property lines)
• Commands for intersecting existing lines or figures
to calculate a new point
• Commands that calculate and/or store one or more
points
• "Locate" commands for traverse work
• Alignment commands
• Spiral commands
• Commands to maintain compatibility with the previous COGO so that existing input may be rerun
• Commands for outputting generated information
from COGO
It is therefore suited to applications such as:
• land surveying
• highway design
• right-of-way surveys
• bridge geometry
• subdivision work
The language consists of common engineering terms,
and no computer experience is required. Problem
definitions can be stored in a file of commands and
executed at a later time, or can be entered using a
terminal keyboard in interactive mode. The commands are identical for both methods.
MINIMUM HARDWARE REQUIRED:
Any valid RSX-11 M, RSX-11 0, or lAS operating system configuration with a 64K byte minimum user
partition.

July 1978

SPD 14.15.2

OPTIONAL HARDWARE:
None
PREREQUISITE SOFTWARE:
One of the following operating systems:
• RSX-11 M, Version 2 or later
• RSX-11D, Version 68 or later
• lAS, Version 1 or later
With one of the following language processors:
• FORTRAN IV/IAS-RSX, Version 1C or later
• FORTRAN IV-PLUS, Version 2.S or later
OPTIONAL SOFTWARE:
None
TRAINING CREDITS:
None
SUPPORT CATEGORY:
C - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
No updates are planned for this product.
ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licensing
provisions of DIGITAL's Standard Terms and Conditions of Sale, which provide in part that the software
and any part thereof may be used on only the single
CPU on which the software is first installed, and may
be copied, in whole or in part (with the proper inclusion of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.
The following key (0, E) represents the distribution
media for the product and must be specified at the
end of the order number, e.g., QPA03-YD = sources
on 9-track magnetic tape.

o 9-track MagnetiC Tape
E = RKOS Disk Cartridge

AE-3404C-TC

COGO-11, Version 1A

SPD 14.15.2

-2Standard Options
QPA03 -Y- Single-use license, source license,
sources, documentation, no support
services (media: D, E)
ADDITIONAL SERVICES:
None

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.