Digital PDFs

AE-34171-TC

August 1978

3 pages

Original

0.2MB

Document:	12.40.09 7808 PDP-11 COBOL
Order Number:	AE-34171-TC
Revision:
Pages:	3
Original Filename:	http://bitsavers.org/pdf/dec/spd/12.40.09_7808_PDP-11_COBOL.pdf

OCR Text

momoomo

Software Product Description
PRODUCT NAME: PDP-11

COBOL, Version 3.1

SPD 12.40.9

DESCRIPTION:
COBOL is a precise, well-defined language for business data processing. PDP-11 COBOL conforms to
the specifications published by the American National
Standards Institute (ANSI) in the document "American
National Standard COBOL," X3.23-1974. PDP-11
COBOL operates under control of the RSX-11 M,
RSTS/E, CTS-500, or lAS operating systems.

1. One TJU16 (TWU16 for 11170) magnetic tape
controller and TU16 transport
2. One TMA 11 magnetic tape controller and TU10
or TS03 transport
3. One RX11 flexible diskette system (on CTS-500
systems only), or
4. One additional RK05 disk drive, for a system total of three RK05 drives

PDP-11 COBOL is properly defined as a subset of full
ANS COBOL and meets the ANS-74 low-level specifications with the following additions (+) and omissions
(-):

+ Full Level 2 Nucleus Module
+ Full Level 2 Table Handling Module
+ Full Level 2 Sequential 1/0 Module
+ Full Level 2 Relative 1/0 Module
+ Full Level 2 Indexed 1/0 Module
+ Full Level 2 Segmentation Module
+ Full Level 1 Library Module, with partial Level 2
REPLACING facility
+ Full Level 1 Interprogram Communication Module
+ Cross Reference Compilation Listing
+ DISPLAY with NO ADVANCING
- RERUN option in I/O-CONTROL paragraph not implemented
The PDP-11 COBOL product includes:
• COBOL compiler and run-time system
• COBRG report program generation utility
• RFRMT source program reformat utility
• CBLMRG COBOL ODL merge utility
MINIMUM HARDWARE REQUIRED:
One of the following operating system configurations:
• Any valid lAS operating system configuration.
• Any valid RSX-11 M operating system configuration
that includes the extended instruction set and a
system total of at least 128K bytes of memory. If the
system device is an RK05 disk, one additional RK05
disk drive beyond the system minimum configuration is required. This is a total of three RK05 disk
drives on an RK05-only configuration.
• Any valid RSTS/E or CTS-500 operating system
configuration that includes the extended instruction
set and a system total of at least 128K bytes of
memory. On dual RK05 configurations, one of the
following is also required:

August 1978

Any configuration must include the following:
• A user area of at least 48K bytes of memory.
• At least 3000 free blocks of on-line disk storage on
the public disk structure.
• An LP11 line printer.
OPTIONAL HARDWARE:
Supports any mass storage, unit record or terminal
device supported by the prerequisite software with
the following exception: DECtape.
PREREQUISITE SOFTWARE:
One of the following operating systems that includes
RMS-11 :
• RSTS/E, Version 6C or later
• CTS-500, Level 3A or 38
• RSX-11M, Version 3 or later
• lAS, Version 2 or later
OPTIONAL SOFTWARE:
• RMS-11 K for multikey ISAM support
• SORT-11, Version 2
TRAINING CREDITS:
None
SUPPORT CATEGORY:
A - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge (includes no installation). After the first year, updates, if
any, will be made available according to then prevailing DIGITAL policies.

AE-34171-TC

SPO 12.40.9

PDP-11 COBOL, Version 3.1
-2ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licensing provisions of DIGITAL's Standard Terms and Conditions of
Sale, which provide in part that the software and any
part thereof may be used on only the single CPU on
which the software is first installed, and may be
copied, in whole or in part (with the proper inclusion
of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and OIGITAL.

Standard options with no support services are only
available after the purchase of one supported license.
When a software license is ordered without support
services, the category of support applicable to such
software is Categ-ory C.
A single-use license only option is a license to copy
the software previously obtained under license, and
use such software in accordance with DIGITAL's
Standard Terms and Conditions of Sale. The category
of support applicable to such copied software is Category C.
The following key (D, E, F, Q, T, V, Z) represents the
distribution media for the product and must be specified at the end of the order number, e.g., QPOll-AD
= binaries on 9-track magnetic tape.
D
E
F
Q
T
V
Z

9-track Magnetic Tape
RK05 Disk Cartridge
7-track Magnetic Tape
RLOl Disk Cartridge
RK06 Disk Cartridge
RK07 Disk Cartridge
No hardware dependency

Standard Options
For RSTSIE or CTS-500 Systems:
QPOll -A- Single-use license, binaries, documentation, support services (media: D, E, F,
Q, T, V)
QPOll -C- Single-use license, binaries, documentation, no support services (media: D,
E, F, Q, T, V)
QPOll -D- Single-use license only, no binaries, no
documentation, no support services
(media: Z)
For RSX-11M Systems:
QP012 -A- Single-use license, binaries, documentation, support services (media: D, E, F,
Q, T, V)
QP012 -C- Single-use license, binaries, documentation, no support services (media: D,
E, F, Q, T, V)
QP012 -D- Single-use license only, no binaries, no
documentation, no support services
(media: Z)

For lAS Systems:
QP013 -A- Single-use license, binaries, documentation, support services (media: D, E, F,

T)
QP013

QP013

-C- Single-use license, binaries, documentation, no support services (media: D,
E, F, T)
-D- Single-use license only, no binaries, no
documentation, no support services
(media: Z)

Update Options
Users of PDP-ll COBOL, Version 3, whose specified
Support Category warranty has expired may order the
following software update at the then current charge
for such update, for use under the existing license.
Except where the medium is designated as Z, the update is distributed in source or binary form on the
appropriate medium. A software update where the
medium is designated as Z grants the user of PDP-ll
COBOL, Version 3, the right to copy the previously
ordered QPOll-H, QP012-H, QP013-H, QPOll-W,
QP012-W, or QP013-W software update for use on an
additional single CPU for which a PDP-l1 COBOL license has been obtained. No installation or other services are included unless specifically stated otherwise.
For RSTSIE or CTS-500 Systems:
QPOll -H- Binaries, documentation (media: D, E,
F, T)
QP01l -H- Right to copy for single use (under existing
license),
no
binaries,
no
documentation, no support services
(media: Z)
For RSX-11 M or lAS Systems:
QP012 -H- Binaries, documentation (media: D, E,
F, T)
QP012 -H- Right to copy for single use (under existing license), no binaries, no documentation, no support services (media:

Z)
For lAS Systems:
QP013 -H- Binaries, documentation (media: D, E,
F, T)
QP013 -H- Right to copy for single-use (under existing license), no binaries, no documentation, no support services (media:

Z)
Users of PDP-ll COBOL, Version 3, whose specified
Support Category warranty has not expired may
order under license the following software update for
the then current media charge. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services
unless specifically stated otherwise.
For RSTSIE or CTS-500 Systems:
QPOll -W- Binaries, documentation (media: D, E,
F, T)

SPD 12.40.9

PDP-11 COBOL, Version 3.1
-3For RSX-11M Systems:
QP012 -W- Binaries, documentation (media: D, E,
F, T)
For lAS Systems:
QP013 -W- Binaries, documentation (media: D, E,
F, T)

For RSX-11 M Systems:
QP012 -G- Pre-delivery kit (media: Z)
For lAS. Systems:
QP013 -G- Pre-delivery kit (media: Z)
ADDITIONAL SERVICES:
None

Miscellaneous Options
For RSTSIE or CTS-500 Systems:
QP011 -G- Pre-delivery kit (media: Z)

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or S in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or S, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY S
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.