Digital PDFs

AE-D007D-TC

May 1980

2 pages

Original

74.7kB

Document:	12.04.03 8006 RT2
Order Number:	AE-D007D-TC
Revision:
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/12.04.03_8006_RT2.pdf

OCR Text

~DmDD~D

Software Product Description
PRODUCT NAME: RT2, Version 4.0
RT -11 Run-Time System

SPD 12.4.3

DESCRIPTION:

MINIMUM HARDWARE REQUIRED:

RP is a license to use a subset of the RT -11, Version 4.0
software on an LSI-11 based system with an RL01,
RL02 or RK05 cartridge disk or RX01 or RX02 floppy
disk as the systems device. RT2 software provides a
single job (SJ) or foreground/background (FB)
execute-only environment for applications developed
on an RT-11 system. It is the user's responsibility to
transport the RP software and the user-developed
software from the RT -11 system to the target RT2
system.

Any valid LSI-11 based system with:

RP includes license to copy only the following RT-11,
Version 4.0 modules as received in an RT-11 kit from
DIGITAL and to copy RT-11, Version 4.0 monitors sysgened for use on the LSI-11.
• RT11 BL.SYS baseline SJ monitor
• RT11 SJ.SYS RT-11 SJ monitor
• RT11 FB.SYS RT-11 FB monitor
• DD.SYS TU58 handler
• DY.SYS RX02 handler
• DL.SYS RL01/RL02 handler
• RK.SYS RK05 handler
• DX.SYS RX01 handler
• TT.SYS terminal handler
• LP.SYS line printer handler
• LS.SYS serial line printer handler
• DUP.SAV Device Utility Program
• KED.SAV Keypad Editor
• K52.SAV
• PIP.SAV Peripheral Interchange Program
• DIR.SAV Directory Listing Program
Single-use licenses are available to operate the BASIC
and APL run-time systems as optional software under
RT2.
Applications developed under FORTRAN IV/RT-11
may be copied under the RT2 license, along with the
FORTRAN IV OTS. The FORTRAN IV Compiler may
not be used on RT2.

June 1980

• at least 24K bytes of memory for the SJ monitor
• at least 32K bytes of memory for the FB RL01, RL02,
or RX02 monitor
• an RKV11, RLV11, or RLV21 cartridge disk system
or an RXV11 or RXV21 floppy disk system
• an LA36, LA38, VT52 or VT100 console terminal
An RT -11, Version 4.0 system is required for developing applications software and building an RP system.

OPTIONAL HARDWARE:
• System total of 256K words of memory
• LAV11-P line printer

PREREQUISITE SOFTWARE:
RT -11, Version 4.0 Operating System

OPTIONAL SOFTWARE:
BASIC-11/RT-11
APL-11

TRAINING CREDITS:
None

SUPPORT CATEGORY:
CUSTOMER SUPPORTED
RT2 is provided on an "as is" basis without warranty
expressed or implied. Any software services, if available, will be provided at the then current charges.
ORDERING INFORMATION:
All binary licensed software, including any subsequent
updates, is furnished under the licensing provisions of
DIGITAL's Standard Terms and Conditions of Sale,
which provide in part that the software and any part
thereof may be used on only the single CPU on which
the software is first installed, and may be copied, in
whole or in part (with the proper inclusion of the

AE-D007D-TC

RT2, Version 4.0

SPD 12.4.3

-2-

DIGITAL copyright notice andany DIGITAL proprietary notices on the software) only for use on such CPU.
All source licensed software is furnished only under
the terms and conditions of a separate Software Program Sources License Agreement between Purchaser
and DIGITAL.
A single-use license only option is a license to copy the
software previously obtained under license.

The following key (Z) represents the distribution media
for the product and must be specified at the end of the
order number, e.g., OJV13-DZ = single-use license
only.
Z

= No hardware dependency

OJV13

-0- Single-use license only.
Minimum quantity: 50.

ADDITIONAL SERVICES:
None