Digital PDFs

XX-EF50A-A4

March 2000

3 pages

Original

0.2MB

Document:	10.51.02 7803 RJE HASP
Order Number:	XX-EF50A-A4
Revision:
Pages:	3
Original Filename:	http://bitsavers.org/pdf/dec/spd/10.51.02_7803_RJE_HASP.pdf

OCR Text

momoomo

Software Product Description
PRODUCT NAME: RJE/HASP, Version 1,
Remote Communications for RSX-11M, RSX-11D and lAS
DESCRIPTION:
RJE/HASP operates as a privileged non-check pointable task performing standard IBM HASP Remote
Job Entry Work-station functions under the RSX-11 M,
RSX-11D, and lAS operating systems. RJE/HASP
functions are executed concurrently with all other
RSX-11 liAS operations.
Communications line control is performed directly by
the RJE/HASP task. Concurrent use of the communications device by other RSX-11 liAS tasks is precluded. Any device accessible through the standard file
control system or through inputloutput requests can
be used as a source or destination for a file on an
input or output data stream. The RJE/HASP task controls these devices through the use of file system calls
and inputloutput requests. A common area is used
for passing data to and from the disk. Any non-file
structured device (Le., card reader, punch, line printer) is attached by the RJE/HASP task during its use.
Operator control is provided through the MCR
command dispatch feature. One terminal can be used
for both RJE/HASP and RSX-11/IAS console operations or a separate operator's terminal can be dedicated to the RJE/HASP control function.
RJE/HASP provides the standard HASP protocol features of:
• data compression of repeated sequential characters
including blanks
• full EBCDIC transparency
• multileaving
• printer vertical forms control skip to channel 1 (top
of form) is supported. (No other vertical forms control is supported.)
RJE/HASP provides multileaved (pseudo
simultaneous bi-directional) communication of up to 7
input and 7 output data streams. The number of input
and output streams accommodated by a particular
HASP task is fixed at assembly time. The operator
can assign file-structured and non-file structured devices to data streams on a per file or temporarily dedicated basis.
MINIMUM HARDWARE REQUIRED:
Any valid RSX-11 M with at least 32K words of memory and memory management, RSX-11D, or lAS operating system configuration which meets the following
requirements:

March 1978

SPD 10.51.2

Main Memory:
• Without file control support - RSX-11M Only
• at least 9K words of memory allocated tor
RJE/HASP operation with one input and two
output data streams (card reader, card punch,
and line printer).
• 300 words of memory are required for each
additional stream without file control support
• With file control support
• at least 14K words of memory allocated for
RJE/HASP operation with one input and two
output streams
• 600 words of memory are required for each
additional stream with file control support.
Communication Devices:
• One of the following communications line controllers:
1. A DU11, 0011, DUP11, or DP11 communications line controller for operation up to 4800
bps.
2. A 0011 communications line controller for operation up to 9600 bps. (Neither the D011-AB nor
the DQ11-BB are required or supported.)
• Bell system or entirely equivalent modems as follows:
• 201A 2000 bps Dial-up
• 201 B 2400 bps Private Line
• 201 C 2400 bps Dial-up
• 208A 4800 bps Private Line
• 2088 4800 bps Dial-up
• 209A 9600 bps Private Line
Required Hardware:
• A KG11-A communications arithmetic unit
Host System Compatibility
The host system must be an IBM System/360 or System 370 running either:
• HASP II, Version 3.1
• HASP II, Version 4.0
• ASP Versions 2.3 through 3.1
• JES1/RES
• JES2
• JES3
The customer's IBM 3601370 configuration must in-

AE-5248C-TC

SPD 10.51.2

RJE/HASP, Version 1
-2-

6. When communicating with IBM, make availabte
to DIGITAL personnel an IBM 360/370 job
stream to run via RJE/HASP on line to a
360/370 in accordance with the configuration
specifications outlined above.

clude one of the following Transmission Control Units
with appropriate synchronous adaptor:
• 2701
• 2703
• 3704
• 3705
The customer's IBM 360/370 Remote Specification
must include the following:
• Printer width: 132 characters
• Terminal type: System 360/22, 25, 30, 40, or 1130,
or System 3
• Data format: Programmable interface
• Terminal Options: Console support, transparency
OPTIONAL HARDWARE SUPPORTED:
Any mass storage or unit record device supported by
the standard file control system of the prerequisite
software.
NOTE:
Some DIGITAL character-oriented devices
(e.g., card equipment) do not support Hollerith characters that do not have ASCII translations.
PREREQUISITE SOFTWARE:
One of the following operating systems:
RSX-11 M, Version 2 or later
RSX-11 D, Version 6B or later
lAS, Version 1.1 or later
OPTIONAL SOFTWARE SUPPORTED:
None
TRAINING CREDITS:
None
SUPPORT CATEGORY:
A - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
CUSTOMER RESPONSIBILITIES:
Before installation of the SOFTWARE, the customer
must:
1. Obtain, install and demonstrate operational to
DIGITAL'S satisfaction any modems and other
equipment and facilities necessary to interface
to DIGITAL'S communications line interfaces
and terminals.
2. Install or have installed all hardware, including
terminals, to be used on the system.
3. Generate for terminal support any and all IBM
systems that will be communicating with the
RJE/HASP terminal to DIGITAL'S satisfaction.
4. Make available to DIGITAL personnel all hardware, inctuding communications facilities and
terminals, to be used during installation and acceptance testing for a minimum of 16 hours
scheduled at reasonable hours over a period of
two days.
5. Provide access privileges and machine time on
any and all IBM systems on which the installation is to be performed.

Delays caused by a failure to meet these responsibilities will be charged at the then prevailing rate for time
and materials.
UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge (includes no installation). After the first year, updates, if
any, will be made available according to then prevailing DIGITAL policies.
ORDERING INFORMATION:
All binary licensed software, inclucling any subsequent updates, is furnished under the licensing
provisions of DIGITAL's Standard Terms and Conditions of Sale, which provide in part that the software
and any part thereof may be used on only the single
CPU on which the software is first installed, and may
be copied, in whole or in part (with the proper inclusion of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.
Standard options with no support services are only
available after the purchase of one supported license.
When a software license is ordered without support
services, the category of support applicable to such
software is Category C.
The following key (C, D, E, N, T, Y) represents the
distribution media for the product and must be specified at the end of the order number, e.g., QJS60-XC
= sources on DECtape.
C
D
E
N
T
Y

DECtape
9-track Magnetic Tape
RK05 Disk Cartridge
TU60 Cassette
RK06 Disk Cartridge
RX01 Floppy Diskette

Standard Options
QJS60 -X- Single-use license, source license,
sources, documentation, support services (media: C, D, E, N, T, Y)
QJS60 -Y- Single-use license, source license,
sources, documentation, no support
services (media: C, D, E, N, T, Y)
ADDITIONAL SERVICES:
None

SPD 10.51.2

RJE/HASP, Version 1
-3-

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will prdvide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (Te) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.