Digital PDFs

AE-3438B-TC

January 1978

2 pages

Original

0.1MB

Document:	09.02.01 7801 PTSP
Order Number:	AE-3438B-TC
Revision:	000
Pages:	2
Original Filename:	http://bitsavers.org/pdf/dec/spd/09.02.01_7801_PTSP.pdf

OCR Text

mDmDDmo

Software Product Description
PRODUCT NAME:

PTSP, Version 1, PDP·11/03 Paper Tape Support Package

DESCRIPTION:
PTSP is a collection of stand-alone programs for developing PDP-11/03 software using paper tape I/O.
Specific PTSP system components are:
ED-11 An editor for creating and modifying ASCII
source tapes.
PAL-11S A relocatable assembler that converts ASCII
source tapes into relocatable binary modules. The
PAL-11S user can prepare a program in small, modular segments, and use conditional assembly directives.
LlNK-11S A linker editor that creates executable load
modules from relocatable modules produced by PAL11S.

Absolute Loader A program that loads absolute binary tapes into memory. Absolute loader enables the
user to relocate PIC (position independent code) programs at load-time and start programs automatically.
ODT-11X A debugging tool that enables the user to
modify programs on-line and control program
execution.

SPD 9.2.1

TRAINING CREDITS:
None
SUPPORT CATEGORY:
C - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
No updates are planned for this product.
ORDERING INFORMATION:
This software is furnished under a license for use on
a single CPU and can be copied and modified (with
inclusion of DIGITAL's copyright notice) only for use
on such CPU, except as may otherwise be provided
in writing by DIGITAL.
The following key ( 8) represents the distribution
media for the product and must be specified at the
end of the "a" number, Le., aJV10-C8 = binaries on
paper tape.

lOX A device-independent I/O executive that enables
the user to interface software to devices supported by
PTSP.

8 = Paper Tape
Standard Options
aJV10 -C- Single-use license, binaries, documentation, no support services (media: 8)

DUMP-AS A dump routine that produces an absolute
load module from a memory image.

ADDITIONAL SERVICES:
None

MINIMUM HARDWARE REQUIRED:
PDP-11/03 with 8K words of memory
DLV11 serial line interface
LT33 terminal with low-speed paper tape reader/punch
OPTIONAL HARDWARE:
Additional memory up to 28K words system total
PREREQUISITE SOFTWARE:
None
OPTIONAL SOFTWARE SUPPORTED:
None

January 1978

AE·3438B·TC

SPD 9.2.1

PTSP, Version 1
-2-

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
d"iagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGITAL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.