Digital PDFs

AE-E442A-TK

May 1978

3 pages

Original

0.2MB

Document:	08.56.00 7806 DECsystem-10 Maintenance Product
Order Number:	AE-E442A-TK
Revision:
Pages:	3
Original Filename:	http://bitsavers.org/pdf/dec/spd/08.56.00_7806_DECsystem-10_Maintenance_Product.pdf

OCR Text

momoomD

Software Product Description
PRODUCT NAME: DECsystem-10/20 Maintenance Product, Version 1.0
DESCRIPTION:
The DECsystem-10/20 Maintenance Product (DM P) is
provided for customers choosing to maintain their
own KL 10 based DECsystems-10 and DECSYSTEMs20. The maintenance package supports the following
equipment.
MAIN FRAME
• KL 10 Central Processor and Console Front End
Processor
• MA20/MB20 Internal Memory
• MF/MG, MH10 External Memory
• RH20 MASSBUS Controller
DISK STORAGE SYSTEMS
• RH P04/6 Disk Subsystem
• RTP04/6 Disk Subsystem
• RHS04/6 Disk Subsystem
MAGNETIC TAPE STORAGE
• TM10B, TU10, TU40
• TTU 16/45 Tape Subsystem
• TX01, 2/TU70, 71, 72
COMMUNICATION SUBSYSTEMS
• DC20/DN20 Synchronousl Asynchronous Front End
• DN87/87S Synchronousl Asynchronous Front End
• DN61/62/64 IBM 2780/3780 Synchronous Front
End
UNIT RECORD EQUIPMENT
• CD20 Card Reader
• CR20 Card Reader
• LP100 Line Printer
• LP20 Line Printer
• LP200
• LP10
• CP10
• CR10
• XY10
• XY20
The DM P maintenance product consists of:
1. A PRINT SET LIBRARY - This library includes
logic and electrical diagrams for ,the MAINFRAME equipment. Other required logic and
electrical print sets may be purchased separately.

June 1978

SPD 8.56.0

2. A MICROFICHE LIBRARY - The microfiche library consolidates all the required hardware and
software maintenance documents into one microfiche file box.
Included also is a one year update service subscription for the documentation on the MDSKL 10. This service provides all information on
changes, additions and deletions to the product.
Follow-on subscriptions may be purchased separately from DIGITAL.
3. A MAINTENANCE PROGRAM LIBRARY - The
program library contains the utility, monitor and
fault detection/isolation diagnostics necessary to
maintain the above listed equipment. The programs are distributed in object format, on DEC
Tape or floppy disks (as required for the specific
Model KL 10) and magtape. The diagnostics provide all the necessary programs to detect and
isolate hardware malfu nctions.
Included in the Maintenance Program Library is a Diagnostic Program Library with diagnostic programs
that can:
• isolate a failure to the function or operation causing
the failure.
• run in both user and executive mode (unless
specified otherwise).

MINIMUM HARDWARE REQUIRED:
• KL 10 Central Processor
• 128K words of core memory (stand alone diagnostics typically require a minimum of 32K words of
memory)
• LP10, LP20, LP100, LP200 series Line Printer
• RP04/5/6 Disk System (with one dual port drive)
• 9-track 800 bpi magnetiC tape system (with two
drives)
OPTIONAL HARDWARE:
None
PREREQUISITE SOFTWARE:
TOPS-10 Operating System, Version 6.03 or later
TOPS-20 Operating System, Version 2 or later
OPTIONAL SOFTWARE:
None

AE-E442A-TK

DECsystem-10/20 Maintenance Product, Version 1.0

SPD 8.56.0
-2-

TRAINING CREDITS:
None
SUPPORT CATEGORY:
C - Software Support will be provided as stated in
the Software Support Categories Addendum to this
SPD.
UPDATE POLICY:
Software Updates, if any, released by DIGITAL during
the one (1) year period following installation, will be
provided to the customer for a media charge (includes no installation). After the first year, updates, if
any, will be made available according to then prevailing DIGITAL policies.
ORDERING INFORMATION:
All binary licensed software, including any subsequent updates, is furnished under the licensing provisions of DIGITAL's Standard Terms and Conditions of
Sale, which provide in part that the software and any
part thereof may be used on only the single CPU on
which the software is first installed, and may be
copied, in whole or in part (with the proper inclusion
of the DIGITAL copyright notice and any DIGITAL
proprietary notices on the software) only for use on
such CPU. All source licensed software is furnished
only under the terms and conditions of a separate
Software Program Sources Agreement between Purchaser and DIGITAL.
The following key (M, P, R) represents the distribution
media for the product and must be specified at the
end of the order number, e.g., ZH009-CM = binaries
on 9-track magnetic tape.
M
P
R

1600 bpi 9-track Magnetic Tape
800 bpi 9-track Magnetic Tape
Microfiche

Standard Options

For KL 1OA (1080) or KL1 08 (1090)
ZH009 -C- Single-use license, binaries, documentation, no support services (media: M,
P)
For KL 1OC (2040, 2050)
ZH006 -C- Single-use license, binaries, documentation, no support services (media: M,
P)
For KL 10 D (1090)
ZHOO? -C- Single-use license, binaries, documentation, no support services (media: M,
P)
For KL 1OE (2040, 2050)
ZH008 -C- Single-use license,
binaries,
documentation, no support services
(media: M, P)

The following option is available as an upgrade kit
from DECsystem 1080 DMP, Version 1, for use on the
same single CPU on which DECsystem 1080 DMP,
Version 1, is licensed. The license previously granted
for DECsystem 1080 DMP, Version 1, shall be extended to cover this upgrade.
ZH010 -C- Single-use license, binaries, documentation, no support services (media: P)

ADDITIONAL SERVICES:
MD-KL 10-K: Maintenance
(media: R)

Documentation

Service

SPD 8.56.0

DECsystem-10/20 Maintenance Product, Version 1.0
-3-

ADDENDUM
SOFTWARE SUPPORT CATEGORIES
Each software product (hereinafter 'SOFTWARE') with a designated Support Category A or B in the applicable Software Product
Description (SPD) existing at the time of order will be the current release at the time of delivery and will conform to the SPD.
DIGITAL's sole obligation shall be to correct defects (nonconformance of the SOFTWARE to the SPD) as described below. Any
SOFTWARE with a designated Support Category C will be furnished on an 'as is' basis.
For SOFTWARE with a designated Support Category A or B, DIGITAL will provide the services set forth below without additional
charge.
CATEGORY A
1. Upon notification by customer to the nearest DIGITAL office that the computer system, including all required prerequisite
hardware and software, is ready for the installation of the SOFTWARE, DIGITAL will install such SOFTWARE in any location
within the contiguous forty-eight (48) United States, the District of Columbia, or a, country in which DIGITAL or a subsidiary
of DIGITAL has a software service facility. The notification must be received by DIGITAL and the system must be ready for
installation within thirty (30) days after the delivery of the SOFTWARE to customer or DIGITAL will have no obligation to
install. Installation will consist of: (1) verification that all components of the SOFTWARE have been received by customer, (2)
loading the SOFTWARE, and (3) executing a DIGITAL sample procedure.
2. During the ninety (90) day period after installation, if the customer encounters a problem with the current unaltered release
of the SOFTWARE which DIGITAL determines to be a defect in the SOFTWARE, DIGITAL will provide the following remedial
service (on site where necessary): (1) if the SOFTWARE is inoperable, apply a temporary correction (TC) or make a
reasonable attempt to develop an emergency by-pass, and (2) assist the customer to prepare a Software Performance
Report (SPR) and submit it to DIGITAL.
3. During the one (1) year period following installation, if the customer encounters a problem with the SOFTWARE which his
diagnosis indicates is caused by a SOFTWARE defect, the customer may submit an SPR to DIGITAL. DIGITAL will respond
to problems reported in SPRs which are caused by defects in the current unaltered release of the SOFTWARE via the
Maintenance Periodical for the SOFTWARE, which reports SPRs received, code corrections, temporary corrections, generally
useful emergency by-passes and/or notice of the availability of corrected code. Software Updates, if any, released by
DIGITAL during the one (1) year period, will be provided to the customer on DIGITAL's standard distribution media as
specified in the applicable SPD. The customer will be charged only for the media on which such updates are provided,
unless otherwise stated in the applicable SPD, at DIGITAL's then current media prices.
CATEGORY B
During the one (1) year period following delivery, the services provided to the customer will be the same as set forth in 3 above.
CATEGORY C
SOFTWARE is provided on an 'as is' basis. Any software services, if available, will be provided at the then current charges.
DIGIT AL shall have the right to make additional charges for any additional effort required to provide services resulting from
customer use of other than current unaltered release of the SOFTWARE operated in accordance with the SPD.