Digital PDFs

EK-DS10V-UR-A01

2000

4 pages

Original

0.1MB

Document:	AlphaServer for OpenVMS VS10 User Reference Card
Order Number:	EK-DS10V-UR
Revision:	A01
Pages:	4
Original Filename:

OCR Text

EK–DS10V–UR. A01

ALPHASERVER FOR OPENVMS VS10
USER REFERENCE CARD
This document is intended as a quick reference for
the user. Additional information can be found in the
AlphaServer DS10 / AlphaStation VS10 Console
Reference guide,
EK-DS10S-CR.
Overview
• Environmental Specifications
• Mechanical Specifications
• Electrical Specifications
• Front Buttons and LEDs
• Ethernet LEDs

•
•

Memory Configuration
SRM Console Commands

•

Remote Management Console (RMC)
Commands

•

Acoustics

Environmental Specifications
Storage
temperature range

–40º C to 66º C
(–40º F to 151º F)

Operating
temperature range

10º C to 40º C
(50º F to 104º F)

Max. rate of change

11º C (20º F) per hour

Storage
humidity range
(noncondensing)

10% to 90% relative humidity;
maximum wet bulb 65º C (149º F)

Operating
humidity range
(noncondensing)

10% to 90% relative humidity
(without removable media) or 20%
to 80% relative humidity (with
removable media); maximum wet
bulb 2º C (36º F)
Nonoperating–4867 m (16,000 ft.);
Operating—2400 m (8,000 ft.)

Max. altitude
Nonoperating shock

PK1015

Height

13 cm (5 in.)

Width

43 cm (17 in.)

Depth

46 cm (18 in.)

Weight

14.5 kg (32 lb)

Electrical Specifications
• Check your power supply setting.
•

Secure the power cord by turning the safety latch
clockwise over the power cord. Secure the latch
by tightening it with a screwdriver.
115V

Beep Codes
PCI Slots

Mechanical Specifications
Leave ventilation room around the system.

230V

•
•

To reduce the risk of electrical shock or damage
to the equipment: Do not disable the power cord
grounding plug. The grounding plug is an
important safety feature. Plug the power cord into
a grounded (earthed) electrical outlet that is
easily accessible at all times. Disconnect power
by unplugging the power cord from the electrical
outlet or the workstation.

30 G, 25 ms halfsine

WARNING: To prevent injury, access is limited
to persons who have appropriate technical
training and experience. Such persons are
expected to understand the hazards of working
within this equipment and take measures to
minimize danger to themselves or others.
CPU modules and memory modules have parts
that operate at high temperatures. Wait 2 minutes
after power is removed before touching any
module. Wear an antistatic wrist strap when
working on this system.

PK1047a

Front Buttons and LEDs
The LEDs are located in the lower right corner on the
front of the system.

Ethernet LEDs
The Ethernet LEDs are on the back of the system,
lower right corner.

PCI Slots
The SRM console command show config displays
PCI information.

Link
PK1043a

Symbol

Function
Halt button. Suspends the operating
system and returns control to the SRM
console.
Environmental amber LED. On
indicates Temperature or Fan LEDs are
on. Flashes when operating system
invokes it as an alert.
Temperature amber LED. On
indicates internal temperature exceeds
operating conditions. The system shuts
down 30 seconds after this LED lights.
Fan amber LED. On indicates at least
one of the three fans in the system has
failed. The system shuts down 30
seconds after this LED lights.
Disk Activity green LED. Flashes
when internal system disks are accessed.

Power Present green LED. On when
power is present in the system.

Speed/Activity

PCI Slot 4

64 Bit

PCI Slot 3

64 Bit

PCI Slot 2

64 Bit

PCI Slot 1

PK1050-99

LED
Link
Speed
Activity

Meaning
Steady green indicates Ethernet connection
Green for Ethernet speed of 100
Amber for Ethernet speed of 10
LED blinks with Ethernet activity

32 Bit

PK1045-99

Memory Configuration
The SRM console command show memory displays
the memory configuration.
DIMM
BANKS

Beep Codes
The speaker in the front of the system reports errors
using a series of beeps.
Beeps
1-2-3
4
6
7

Meaning
Valid firmware image not found
Valid ROM header not found
Memory error (or bad checksum) detected
DIMMs in a memory bank do not match

Power button. Push in to start the
system and connect power. Push again
to remove power and stop the system.

1
0
1
0
DIMM CONFIGURATION RULES:
• Always fill at least one bank (0 or 1).
• Use the same two DIMMs within a bank (size and vendor).
PK1046a

SRM Console Commands
alphabios

Loads and starts the AlphaBIOS console.

boot

Loads and starts the operating system.

clear envar

Resets an environment variable to its
default value.

clear password
continue
crash
deposit
edit

examine
help

Sets the password to zero.
Resumes program execution.
Forces a crash dump at the operating
system level.

Invokes the console line editor on a RAM
file or on the nvram file (power-up
script).
Displays the contents of a memory
location, register, or device.
Displays information about the specified
console command.
Resets the system to a known state.

lfu

Runs the Loadable Firmware Update
Utility.

more
prcache

set host

Turns off secure mode, enabling access
to all SRM console commands during the
current session.

Connects to an MSCP DUP server on a
DSSI device.
Sets the console password for the first
time or changes an existing password.

set secure

Enables secure mode without requiring a
restart of the console.

show envar

Displays the state of the specified
environment variable.

alert_clr

Clears alert flag, stopping dial-out alert
cycle.

alert_dis

Disables the dial-out alert function.

alert_ena

Enables the dial-out alert function.

disable

Disables remote access to the modem port.

enable

Enables remote access to the modem port.

halt

Halts the server.

haltin

Causes a halt assertion.

show config

Displays the configuration at the last
system initialization.

haltout

Terminates a halt assertion created with
haltin.

show cpu

Displays the state of each processor in
the system.

hangup

Terminates the modem connection.

help or ?

Displays the list of commands.

show device

Displays a list of controllers and their
devices in the system.

poweroff

Turns off power.

show memory

Displays memory module information.

poweron

Turns on power.

show pal

Displays the version of the privileged
architecture library code (PALcode).

quit

Exits console mode and returns to system
console port.

show power

Displays information about the power
supplies, system fans, CPU fans, and
temperature.

reset

Resets the server. Emulates pressing the
Reset button.

setesc

Displays the version of the console
program.

Changes the escape sequence for invoking
command mode.

setpass

Changes the modem access password.

status

Displays system status and sensors.

show version

Displays a file one screen at a time.
Utility that initializes and displays status
of the optional PCI NVRAM device.

Sets or modifies the value of an
environment variable.

set password

Writes data to the specified address.

initialize

set envar

Remote Management Console (RMC)
Commands

stop

Halts the specified processor. (Same as
halt.)

test

Runs firmware diagnostics for the
system.

Acoustics
Preliminary declared values per ISO 9296 and ISO 7779:
LWAd, B

LpAm, dBA
(bystander positions)

with 0xHDD
with RZ1DF

Idle

Operate

Idle

Operate

5.3
5.4

5.3
5.5

45
46

45
48

Current values for specific configurations are available from Compaq
representatives. 1 B = 10 dBA.

Schallemissionswerte — Vorläufige Werteangaben nach
ISO 9296 und ISO 7779/DIN EN27779:

mit 0xHDD
mit RZ1DF

Schalleistungspegel
LWad, B

Schalldruckpege
LpAm, dBA
(Zuschauerpositionen)

Leerlauf

Betrieb

Leerlauf

Betrieb

5,3
5,4

5,3
5,5

45
46

45
48

Aktuelle Werte für speziele Ausrüstungsstufen sind uber die Compaq
Computer Vertretungen erhältelich. 1 B = 10 dBA.

For More Information
• AlphaServer DS10 / AlphaStation VS10 Console
Reference (EK-DS10S-CR)
•

AlphaStation VS10 Quick Setup (EK-DS10VCP)

•

Using a Web browser, follow links to the
appropriate documentation from the URL:
http://www.compaq.com/showroom/