Digital PDFs

AA-3407V-TC

January 1984

9 pages

Original

0.7MB

Document:	RSX-11M Software Product Description Version 4.1
Order Number:	AA-3407V-TC
Revision:	0
Pages:	9
Original Filename:	http://bitsavers.org/pdf/dec/pdp11/rsx11m_s/RSX11M_V4.1_Apr83/1_Introduction/AA-3407V-TC_RSX-11M_4.1spd_198401.pdf

OCR Text

Software
Product
Description
PRODUCT NAME: RSX-11 M, VERSION 4.1

SPD 14.35.21

REAL TIME OPERATING SYSTEM
DESCRIPTION
RSX-11 M is a disk based, reai-time operating system
that runs on any UNIBUS PDP-11 processor, the PDP11/23, the PDP-11/23-PLUS, and the PDP-11/70. It
provides an enviroment for the development and execution of multiple real-time tasks (program images)
using a priority structured, event-driven scheduler.
System generation allows the user to continue the
software for systems ranging in size from small 32K
byte systems to large 3B40K byte systems.
Program development and real-time tasks can execute
concurrently in systems with at least 4BK bytes of
memory. The system's software priority levels enable
the user to compile/assemble, debug, install and execute tasks without affecting real-time task response.
A multiuser, program development facility is available
for systems with a recommended minimum of 64K
bytes of memory. LOGIN/LOGOUT, password protection, device access protection, a round robin scheduler
(running under the real-time executive), and concurrent execution of equal priority tasks via executive level
swapping are provided. All systems have the MCA
command interface. Mapped systems can select the
easier-to-use Digital Command Language (DCL), with
MCA or DCL selectable on a per terminal basis.
Tasks can be written in MACR0-11 assembly language, or in optionally available FORTRAN-77,
COBOL-B1, CORAL 66, and BASIC-PLUS-2. Shareable libraries and system support for user-created libraries are provided. The EDI and EDT editors, utilities,
symbol cross-reference, interactive debugger, and
task memory dump facilities are provided to assist task
development and checkout.
The RSX-11 M file system provides automatic space
allocation and file structures for all block-structured
devices. Features include file protection, device independence and logical device assignment.
During system generation the user can select a minimum 4K byte version of the resident file system to
conserve space. Multiheader file support is provided,
which enables file size to be limited only by the capacity of the volume on which it resides.

r ~o~oomo
1

sorrware

In addition, two record access mechanisms are provided (FCS and RMS), Sequential, random, and rea!itive (RMS-11) file organizations are provided. Multikeyed Indexed Sequential Access Method (ISAM) files
are supported with the supplied RMS-11 routines. The
use of the File Control Services (FCS) will increase the
user task size by approximately 2K to BK bytes,
depending on the number of open files and the services
desired. The Record Management System (RMS)
requires at least BK bytes per task.
Indirect command file support provides extremely
powerful batch-like facilities. A terminal user can
create a file containing system commands. The system
can then be instructed to execute the commands in the
files without operator invention. The indirect file processor can be executing command files concurrent
with real-time task execution.
Most PDP-11 processors have Memory Management
available that provides logical to physical memory
mapping. If the configuration does not include hardware memory management, the system can support
between 32K and 56K bytes of memory. If the configuration includes hardware memory management, RSX11 M can support between 56K and 3B40K bytes of
memory. RSX-11 M provides the same primary services
in mapped and unmapped systems; however, some
supplied optional features and separately licensed
software options require hardware configuration larger
than the minimum supported systems.
Memory is logically divided into partitions in which
tasks are loaded and executed. Activity in a partition
can either be user-controlled or system-controlled; the
user determines the placement of tasks in the former,
and the system controls the placement of tasks in the
latter. Automatic memory compaction minimizes
fragmentation of a system-controlled partition.
Unmapped systems support only user-controlled partitions. Mapped systems support both user-controlled
and system-controlled partitions.
Real-time interrupt response is provided by the system's task scheduler that recognizes 250 software
priority levels. The user-specified task priority determines the task's eligibility to execute. A task can be
fixed in a partition to ensure immediate execution

January 1984
AE-3407V-TC

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

SPD 14.35.21

when it is activated, or it can reside on disk while it is
dormant to make memory available to other tasks. Task
checkpointing enables tasks to be displaced from a
partition to enable a higher priority, nonresident task to
execute.

Memory-32K bytes without RA60/80/81 support, 128K
bytes with RA60/80/81 support
Console - DL 11, DLV11 or compatible interface
Clock - May be KW11-L, KW11-P or DL 11-W if not
provided by processor or bootstrap Hard disk from
optional hardware list and appropriate backup device

Sottware-supported Rel/ability Features
• Processor error logging (PDP-11/44, 11/45, 11/50,
11/55, 11/60, 11/70)
• Disk and magnetic tape error logging
• Power fai I restart
• On-line device exercisor (IOX) to verify correct
operation of disks and tapes

The basic 32K byte RSX-11 M system provides approximately 16K bytes of memory for user tasks and 16K
bytes of memory for system space. Additional executive services and device drivers can be selectively
inco_rporated into the system at increased memory
space usage. The following are contained in the basic
system memory space:

Optional RSX-11M Features
• Logical device assignments
• Magnetic tape character set translation
• Line printer spooling
• Loadable device drivers
• Post-mortem and snapshot dump facility
• Crash dump analyzer facility
• Host for RSX-11 S systems
• Optional full-duplex terminal driver that supports
OMA output (with DH11 interface) and the DL 11-E
with modem control
• RMS sequential, indexed sequential, and relative
file access
• Direct connect of user task to hardware interrupts
• Memory management facilities

• Executive
• File System Primitives (4K version)
• Operator interface task (MCA)
• Task Loader
• Space for three device drivers
One system disk driver
A small terminal driver supporting a single DL 11 line
One other driver (excluding ICS11/ICR11)
A minimum of 56K bytes is required for mapped systems or where it is desired to perform concurrent program development and application execution.
Although magnetic tape drives are supported in a 32K
byte system, the recommended memory for tape support is 56K bytes.

SOURCE CODE INFORMATION

OPTIONAL HARDWARE

Source code modules for the RSX-11 M Executive and
privileged code are provided with binary, single-use
license options on all available distribution media in
order to generate an RSX-11M system customized for
the user via sysgen.

NOTE: In some cases not all hardware features of the
following options are supported. Hardware
and software restrictions can limit the number
of devices that a given system can support.
• Additional memory to a system total of 56K bytes on
systems that do not include the hardware memory
management unit, or 3840K bytes on systems that
inciude the hardware memoiy management unit.
• KT11 Memory Management Unit (requires a minimum of 56K bytes of memory)
• KT24 PAX Module (required on 1%4forgreaterthan
248K bytes memory support)
• KE11-A,B Extended Arithmetic Element (supported
only on systems that do not include a memory management unit)
• KE11-E Extended Instruction Set
• KE11-F Floating Instruction Set
• FP11 Floating Point Processor
• KEF11-AA Floating Point Processor
• FPF11 Floating Point Processor
• KW11-Y Watch-dog Timer Clock

This source code is provided on an "AS IS" basis without any warranty of any kind either express or implied.

MINIMUM HARDWARE REQUIRED
For System Generation
Processor - Any UNIBUS PDP-11 processor, PDP11/23, PDP-11/23-PLUS, MICRO/PDP-11, PDP-11/23S,
or PDP-11/70
Memory - 128K bytes
Console - DL 11, DLV11, or compatible interface
Clock - Can be KW11-L, KW11-P, or DL 11-W if not
provided by processor or bootstrap
Disk - Dual RL01/02, dual RK06/07, RA60/80/81
RM02/03/05/80, or RP04/05/06.
Tape - For all RA60/80/81, RM02/03/05/80 and
RP04/05/06 systems, a 9-track (except TS03) tape from
the optional hardware list is required.

110 Peripherals
• PR11 paper tape reader or PC11 paper tape reader/
punch
• CR11 or CM11 card reader
• VT11/VS60 Graphics Display processor and scope
except on PDP-11/24, 11/44, or 11/70 when 22-bit
addressing in the first 56K bytes of physical
memory.

For System Execution
Processor - Any UNIBUS PDP;:-11, PDP-11/23, PDPUlf"Or'\/On0_11 n~DnD.11/7n
'"'-r0111~
L-V"'"1, 1v11v1'"""""'1 .....,,
• • , .,. • ...,.
• ., •

111,.,,,
1 11

-2-

SPD 14.35.21

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

no ESCAPE sequence support on VTSO, VT52,
VTSS.) These terminals are supported when connected to DH11 (with or without DM11-BB), DZ11,
DJ11, DL11-A,B,C,D,E, orW, DLV11, DLV11-E,F,J,
or DZV11.
• The PC100 is supported as a terminal in VT102
mode
• The PC278 (DECmate-11) is supported as a terminal
in VT102 mode
• The PRO 350 is supported as a VT102/VT125 in
emulation mode

• LA35, LA180, LS11, LP11, or LV11 line printer (no
• plotter support)
• KMC11-A Auxiliary processor as a line printer OMA
interface
• LP27 with LP11 interface

9- Track Magnetic Tape Drives
• TU10, TS03, TU10W, TE10 800 BPI tape drives
• TU16, TE16, TU45, TU77 800/1600 BPI tape drives
• TS111600 BPI tape drive
• TUBO
• TSVOS

NOTE:A maximum of 64 terminals is supported.

Other Magnetic Tape Devices

• RT02 Alphanumeric Display
• RT02-C Alphanumeric Display and Badge Reader

• TA 11 dual drive cassette tape system
• TU58 DECtape II Cartridge with DL-11 or DLV-11
controller*
• TC11 DECtape controller and dual transport

Communications
•
•
•
•
•
•
•
•
•
•

* Note: The TUSB should be used only in a standalone, lightly loaded enviroment. If used as a
file device on a heavily loaded system, it can
degrade system performance.

Hard Disk Devices
• AK 11 disk cartridge control Ier with A KOSJ or A KOSF
disk drives
• ALV11, ALV122, or AL11 disk cartridge controller
with AL01 or AL02 drives
• AK611 disk cartridge controller with AK06 or AKO?
disk drives
• AK711 disk cartridge controller with AK06 or AKO?
disk drives
• RPA02/AP02 disk pack drives (with AP11 controller)
• AP03 disk pack drives (with AP11 controller)
• AP04, APOS, or AP06, disk pack drives (with appropriate controller)
• AS03 or AS04 fixed-head disks (with appropriate
controller)
• AM02, AM03, or AMOS disR pack drives (with
appropriate controller)
• AM80 disk drive (with AH70 controller)
• ML 11 semiconductor disk emulator (with appropriate controller)
• AA60/80/81 disk drives (with UDA50 controller,
128K bytes memory minimum)
• AQDX1/AD51 drive

DL 11-E and DLV11-E single line interfaces
DP11 synchronous line interface
DU11 synchronous line interface
DUP11 synchronous line interface
0011 OMA synchronous line interface
DA11-B OMA UNIBUS link
DMC11 interprocessor link
DMR11 interprocessor link
DUV11 synchronous line interface
DZS11 statistical multiplexer

Laboratory/Industrial Control
• AD01-D A/D converter
• AFC11 A/D converter
• DRS/DSS11 Industrial Control System Modules
• UDC11 Universal Digital Controller
• ICS11/ICR11 Industrial Control Subsystem
• IP11 and IPV11 Process Control subsystems

Data Acquisition
One or more of the following subsystems
• LPS11 Laboratory Peripheral Systems
• AR11 Analog Real-Time Systems, Options: DR11-K
16-bit digital 1/0 option, one per subsystem (bit
interrupt capability not supported)
• LPA 11-K Laboratory Peripheral Accelerator
• Laboratory 1/0 Subsystem configured using the following options
ADK11-KT 12-bit A/D converter with 16-channel
multiplexer; one per subsystem
AD 11-K 12-bit A/D converter with 16-chan nel mu 1ti plexer, 16 per subsystem (15 if ADK11 is part of
same subsystem)
KW11-K Dual real-time clock with Schmitt triggers;
one per subsystem (clock already included in
ADK11-KT, no KW11-K required if one is present)
AM11-K 48-channel A/D multiplexer with gain ranging; one per AD11-K or ADK11-KT
DR11-K 16-bit digital 1/0 option; 16 per subsystem
AA 11-K 4-chan nel 12-bit D/A converter with scope
control; 16 per subsystem
AAV11-A, ADV11-A, KW11-A, and DRV11 real time
options

Note: With this software product, serious data corruption and/or performance degradation can
occur if, in a disk drive with the dual port
option, the port select switch is placed in the
programmable position.

Soft Disk Devices
• AX11, AX211, and AXV21 floppy disk systems
• AQDX1/AX50 floppy disk system

Terminals
• LA30, LA34, LA36, LA38, ~A 120, LA 180S, L T33,
L T35, VT05, VT50, VT52, VT100, VT101, VT102,
VT220, VT240 terminals, and VT55, VT105, and
VT125 graphics display terminals. (MCA provides

-3-

SPD 14.35.21

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

PREREQUISITE SOFTWARE

INSTALLATION

None

Only experienced customers should attempt installation of this product. DIGITAL recommends that all
other customers purchase DIGITAL's Installation Services. These services provide for installation of the
software product by an experienced DIGITAL Software Specialist.

OPTIONAL SOFTWARE
Refer to the RSX-11 M Optional Software Cross Reference Table (20.98.xx) for all available optional software.
SOFTWARE WARRANTY

DIGITAL's Installation Services can be purchased as
part of a Packaged Service Option or bought separately.

Warranty for this software product is provided by
DIGIT AL with the purchase of a license for the product.
There is no additional charge. This software product is
warranted to conform to the Software Product Description
(SPD). This means that DIGITAL will remedy any nonconformance when it is reported to DIGIT AL by the customer
during the warranty period.

ORDERING INFORMATION
DIGITAL provides a wide range of material and service
options supporting this software product. Each option
is described below. IF YOU ARE ALREADY FAMILIAR
WITH THESE OPTIONS YOU MAY OBTAIN THE
ORDERING INFORMATION DIRECTLY FROM THE
SOFTWARE OPTIONS CHART. In most cases you will
want to review the following descriptions to determine
what options you require.

The warranty period is ninety (90) days. It begins when
the software is installed or thirty (30) days after delivery
to the end user, whichever occurs first and expires
ninety (90) days later or one hundred eighty (180) days
after release of a subsequent version of the software.

You will need a separate license for each CPU on which
you will be using the software product (except as otherwise specified by DIGITAL). Then you will select the
materials and service options you need to utilize the
product effectively. You can order the materials and
service options individually. But, to ensure that you get
the set of services you need and to simplify the ordering process, DIGITAL offers.Packaged Service Options
designed for your environment and experience level.
We recommend that you review these packages based
on your individual needs. Not only are they comprehensive but they are economical, since the cost of each
package is less than the total cost of the individual
service options.

Warranty Service
DIGITAL provides software warranty service worldwide. Service is provided in the country of purchase
and is not transferable between countries.
DIGITAL will provide a service location which will
accept reporting (in a format prescribed by DIGITAL)
of a nonconformance problem caused when using the
licensed software under normal conditions as defined
by the SPD. DIGITAL will respond to a nonconformance problem in the current unaltered release of the
licensed software by issuing correction information
such as: correction documentation, corrected code, or
notice of availability of corrected code; or a restriction
or a bypass. The customer will be responsible for the
preparation and submission of the problem report to
the service location.

You order the license, materials and services using
order numbers of the form: Qxxxx-X?. "Qxxxx" refers
to the specific software product, "X" is the license code
or material service option and "?" is the selectable
media code for machin'e readable materials.

Warranty Exclusion
DIGITAL DOES NOT WARRANT THAT THE SOFTWARE LICENSED TO CUSTOMER SHALL BE ERROR
FREE, THAT THE SOFTWARE SHALL OPERATE
WITH ANY HARDWARE AND SOFTWARE OTHER
THAN AS SPECIFIED IN THIS SPD, THAT THE
SOFTWARE SHALL SATISFY CUSTOMER'S OWN
SPECIFIC REQUIREMENTS, OR THAT COPIES OF
THE SOFTWARE OTHER THAN THOSE PROVIDED
OR AUTHORIZED BY DIGITAL SHALL CONFORM
TO THE SPD.

Single-Use licensed software is furnished under the
licensing provisions of DIGITAL's Standard Terms and
Conditions of Saie, which provide in part that the software and any part thereof may be used on only the
single CPU on which the software is first installed, and
may be copied, in whole or in part (with the proper
inclusion of DIGITAL's copyright notice and any proprietary notices on the software) for use on such CPU.
LICENSE OPTIONS
Single-Use License Option

DIGITAL MAKES NO WARRANTIES WITH RESPECT
TO THE FITNESS AND OPERABILITY OF MODIFICATIONS NOT MADE BY DIGITAL.

The Single-Use License is your right to use the software product on a single CPU and it includes your 90
day warranty.

IF THE SOFTWARE FAILS TO FUNCTION FOR REASONS STATED ABOVE, THE CUSTOMER'S WARRANTY WILL BE INVALIDATED AND ALL SERVICE
CALLS WILL BE BILLABLE AT THE PREVAILING PER
CALL RATES.

For your first installation of this software product you
must purchase as a minimum:
• Single-Use License option, and
• Distribution and Documentation option

-4-

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

SPD 14.35.21

The license gives you the right to use the software on a
single CPU and the Distribution and Documentation
option provides the machine readable software and
related documentation.

• Migration Option, and
• Distribution and Documentation option
To use this software product on additional CPUs currently licensed for RT-1 t, RSX-11 D, and IAS, you must
purchase as a minimum:

To use this software product on additional CPUs, you
must purchase as a minimum:

• Migration option

• Single-Use License option

MATERIALS AND SERVICE OPTIONS

In addition to the right to use, the license gives you the
right to copy the software from your original CPU
installation to the additional CPU. Therefore, the Distribution and Documentation option is not required,
but optional.

PACKAGED SERVICE OPTIONS
System Start-Up Service Packages (SSSP) are comprehensive sets of services tailored to satisfy your first
year startup needs for software service and training.
Each package includes, for a fixed price, the Distribution and Documentation and a one year Software Product Service Agreement for this product as well as
most dependent software products purchased concurrently. Other service components are included at various SSSP levels. DIGITAL offers three packages for
this product:

PDP-11 Operating System General License Option
The PDP-11 Operating System General License option
is a package of single-use iicenses which are your
right-to-use all of the following operating systems on a
single CPU:
RT-11, RSX-11 M, RSX-11S, RSX-11 M-PLUS, DSM11, RSTS/E, CTS 300

SSSP Level Ill is the most comprehensive package
designed to support new users, more complex system
configurations, and users whose system availability is
critical. In addition to a one year Software Product
Service Agreement and the Distribution and Documentation materials, this package includes Installation,
Orientation and a level of Training services to provide
an indepth product understanding.

The General License option provides all the SingleUse License rights described above for each software
product except it includes a 90 day warranty only for
the first software product to be installed.
You purchase a General License option according to
the category to which your CPU belongs. The categories are listed below.
QJB36-UZ
QJB39-UZ
QJB43-UZ
QJB46-UZ
QJB51-UZ
QJB56-UZ
QJB66-UZ
QJB76-UZ

SSSP Level II is designed for customers with some
system experience who want DIGITAL to install their
software and assist them in initial system use. In addition to a one year Software Product Service Agreement
and the Distribution and Documentation materials, this
package includes Installation, Orientation and a level
of Training services to expand on existing software
product expertise.

DCT11 Microprocessor Chip
DCF11 Microprocessor Chip
DCJ11 Microprocessor Chip
KD11, KDF11 CPU Modules
11 C23 MICRO/PDP-11 Models and
Systems
11/03 through 11/23-Plus Models and
Systems
11/24 through 11/40 Models and
Systems
11/44 through 11/70 Models and
Systems

SSSP Level I is designed for more experienced customers who want to maintain their own software. This
package includes a one year Software Product Service
Agreement and the Distribution and Documentation
materials. In addition, this package includes a minimal
level of Training services necessary to provide required
product information.

For the first installation of this software product you
must as a minimum:
• have, or purchase a General License option, and

For more information concerning SSSP, please contact your local DIGITAL sales office.

• Distribution and Documentation option

Distribution and Documentation Option

To use this software product on additional CPUs, you
must as a minimum:

The Distribution and Documentation option provides
the software object code in binary form and the basic
documentation. You must have, or order, a Single-Use
License to obtain this option. You will need this option
to install the software for the first time. You will also
need this option to obtain revised versions of the software product when they become available.

• have, or purchase a General License option
Migration Option
Current licensed users of RT-11, RSX-11 D, and IAS are
eligible for the migration option. This is a Single-Use
License offered at a reduced price and provides all of
the License rights described above.

If you prefer to receive automatic distribution of
revised versions for this product, you must purchase a
Software Product Service Agreement.

For your first installation of this software product you
must purchase as a minimum:

-5-

SPD 14.35.21

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

Self-Maintenance Service is designed for customers
who require only minimal support but wish to rec~ive
revised versions of the software and documentation
information from DIGITAL. In addition, the service
provides newsletters or dispatches.

Software Revision Right:-To-Copy Option
The Right-To-Copy option allows a customer with multiple CPU's to copy a revised version of a software
product from one CPU to another. Each CPU must be
1tcensed for that product. You first install the revised
software on one CPU; then you can make copies for
additional CPU's by purchasing the Right-To-Copy
option for each additional CPU.

All agreements are available to licensed DIGITAL customers on an annual, contractual basis.
A variety of service options may be added to an existing
Software Product Service Agreement as follows:

If you prefer to automatically obtain the right-to-copy,
you must purchase a Service Right-to-Copy for each
additional CPU; this is a service added to a Software
Product Service Agreement.

• Customers who want to copy the revised software
received under their Software Product Service
Agreement onto additional CPUs running that same
product may order a Service Right-to-Copy for each
CPU, Qxxxx-3Z

Documentation-Only Option
You can obtain one copy of the basic documentation
by purchasing the Documentation-Only option.
Installation Service Option
Installation Service includes those services provided by a
DIGIT AL Software Specialist to successfully install a
software product. Digital's Installation Service accelerates
your productive use of this product.
Software Product Service Agreements
DIGITAL offers you a choice of three Software Product
Service Agreements to support your software. These
agreements provide a set of the following services
depending on the agreement selected: remedial and
maintenance service, revised versions of the software
and documentation, telephone support and newsletters or dispatches containing suggested fixes for
known problems.

• Customers who have a Software Product Service
Agreement can obtain an additional copy of the
documentation supplied under the Agreement by
ordering the Documentation Update Service,
Qxxxx-KZ.
• Customers who have a Software Product Service
Agreement can obtain an additional copy of the
dispatches supplied under the Agreement by ordering the Additional Dispatch Subscription Service,
Qxxxx-1Z.
• Customers who have a Basic Service or DECsupport Service Agreement can add additional names
to the three who, under the Agreement, may call the
Telephone Support Center by ordering the Additional Telephone Support Center Contact Service,
Qxxxx-6Z.

The level of service you need depends primarily on
three factors: (1) your available manpow~r. (2) your
staff's level of expertise, and (3) the importance to you
of having your system current and operating at peak
efficiency. Our DIGITAL representative can help you
select the service best suited to your needs. The
agreement types are listed below.

TRAINING FROM EDUCATIONAL SERVICES
DIGITAL's Educational Services sells a full spectrum
of training products and services to support the installation, maintenance and/or management of DIGITAL
software. Course formats vary from seminars to packaged training materials (self-paced instruction and
computer-based instruction) to traditional classroom
instiuction at DIGITAL's 27 \•1or!d~11ide Training Centers. Training is included in most System Start-Up Service Packages (SSSP) and is available for your ongoing training needs for this software product and related
products. Course recommendations are listed below
and are grouped according to the SSSP available for
this product.

DECsupport Service is designed for people requiring
high availability of their system and for customers who
need regular access to DIGITAL's technical expertise.
It is the most comprehensive support service, offering
on-site preventative maintenance and remedial support for critical problems. In addition, it also provides
revised versions of the software and documentation,
fast response; telephone support and newsletters or
dispatches.

The recommended courses for SSSP Level Ill are:

BASIC Service is ideal for customers who have their
own technical staff but need fast answers to operational questions. The telephone support provided in
this service gives you timely answers and solves most
software problems. In addition, you get revised versions of the software and documentation, and newsletters or dispatches.

• RSX-11 M/M-PLUS Utilities and Commands
• PDP-11 Assembly Language Programming
• Programming in Macro-11
• Programming RSX-11M in FORTRAN/Macro
• RSX-11 M System Manager
The recommended courses for SSSP Level II are:
• RSX-11 M/M-PLUS Utilities and Commands
• Programming RSX-11 M in FORTRAN/Macro
• RSX-11 M System Manager

-6-

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

SPD 14.35.21

For a complete listing of course schedules and prices,
c:efer to the DIGEST, Education Services' quarterly
publication. For curriculum-specific information, training recommendations and assistance in planning training programs, contact your Educational Services Marketing Representative.
Professional Software Services

DIGITAL Software Specialists are available on a percall or resident contract basis to help in all phases of
software development or implementation. Specialists
are available to serve as technical consultants, decision support consultants or business systems analysts.
Resources are available to:

Most users do not require source materials. They are
used primarily to make modifications to the software
product. Source kits provided by DIGITAL do not
necessarily contain all source files used by DIGITAL to
build binary kits.
Source License and Sources Distribution Option

This option provides you with the machine readable
source code for this software product. It gives you the
right to use the source code on any CPU at the facility/location specified in the agreement which has a
Single-Use License for the object code.
Source License and Sources Listings Option

This option provides you with listings of the source
programs for this software product. It gives you the
right to use the listings for any CPU at the facility/location specified in the agreement which has a Single-Use
License for the object code.

• Supplement your programming staff
• Assume project management responsibility
• Develop software
• Assure successful start-up and performance with
product specific packaged services
Contact your DIGITAL representative for additional
information and ordering details.
SOURCE MATERIALS OPTIONS

You can obtain optional source materials for this software product by signing DIGITAL's Software Program
Sources License Agreement and then purchasing the
source option(s) you want. The agreement entitles you
to use the source materials at one customer facility or
location which is specified in the agreement.

-7-

Sources Distribution Option

This option provides you with the revised version of the
machine readable source code for this software product.
Sources Listings Option

This option provides you with listings of source code
for the revised version of the software product.

SPD 14.35.21

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

Chart
Trie distribution Media Codes used in the Software Options Chart are described below. You specify the desired
Media Code at the end of the Order Number, e.g., QJ738-HD =binaries on D = 9-track 800 BPI Magtape (NAZI).
D = 9-track 800 BPI Magtape (NAZI)
H = AL02 Disk Cartridge
M = 9-track 1600 BPI Magtape (PE)
Q = AL01 Disk Cartridge

A
T
V
Z

Microfiche
AK06 Disk Cartridge
AK07 Disk Cartridge
No hardware dependency

SOFTWARE OPTIONS CHART
NOTE: The availability of these software product options and services may vary by country. Customers should
contact their local DIGITAL office for information on availability.

OPTIONS

LICENSE OPTIONS: A LICENSE IS
REQUIRED FOR EACH CPU.

Single-Use License

ORDER
NUMBER
RL01/RL02
BASED
SYSTEMS

ORDER
NUMBER
RK06/RK07
BASED
SYSTEMS

IM1grat1on Option from
jRT-11, RSX-110 and IAS
PACKAGE SERVICE OPTIONS:

System Start-Up Service Package, Level 11

System Start-Up Service Package, Level I

Distribution and
Documentation Option

ORDER
NUMBER
RASO/
80/81
BASED
SYSTEMS

I
!
QJ628-UZ T QJ628-UZ

1QJ628-UZ

I
I

I QJBxx-UZ*

QJBxx-UZ*

l QJ740-UZ

QJ740-UZ

QJ738-7M
QJ738-7D
QJ738-7H
QJ738-7Q

QJ629-BD
QJ629-BT
QJ629-BM
QJ629-BV

QJ629-7D
QJ629-7T
QJ629-7M
QJ629-7V

QJ738-5M
QJ738-5D
QJ738-5H
QJ738-5Q

QJ629-5D
QJ629-5T
QJ629-5M
QJ629-5V

QJ738-HM
QJ738-HD
QJ738-HH
QJ738-HQ

QJ629-HD
QJ629-HT
QJ629-HM
QJ629-HV

QJBxx-UZ*

I
r QJ628-UZ
QJBxx-UZ* l

I QJ740-uz

QJ637-BD
QJ637-BM

QJ737-BD
QJ737-BM

QJ676-BD
QJ676-BM

+ QJ637-7D I QJ737-7D

I
II QJ676-7D

QJS37-7~,,1

QJ637-5D
QJ637-5M

I
l
I

QJ737-7M

QJ737-5D
QJ737-5M

QJ676-7M

QJ676-5D
QJ676-5M

QJ637-HD
QJ637-HM

QJ737-HD

i QJ737-HM

* For the complete Option Number, refer to the Ordering information description for this option.

-8-

QJBxx-UZ*

QJ740-UZ

J
QJ628-UZ

isystem Start-Up Service Package, Level Ill OJ738-BM
QJ738-BD
j QJ738-BH
I QJ738 BQ

ORDER
NUMBER
RM02/03/
05/80 RP07
BASED
SYSTEMS
I

PDP-11 Operating System
General License*

ORDER
NUMBER
RP04/05/06
BASED
SYSTEMS

QJ676-HD
QJ676-HM

SPD 14.35.21

RSX-11M, Version 4.1
REAL TIME OPERATING SYSTEM

SOFTWARE OPTIONS CHART (Continued)

OPTIONS

ORDER
NUMBER
RL01/RL02
BASED
SYSTEMS

1 ORDER
I

ORDER
NUMBER
RP04/05/06
BASED
SYSTEMS

NUMBER
RK06/RK07
BASED
SYSTEMS

ORDER
NUMBER
RM02/03/
05/80 RP07 .
BASED
SYSTEMS
I

Documentation Only Option

QJ628-GZ

Installation Service
Option

QJ738-IM
QJ738-ID
I QJ738-IH
QJ738-IQ

QJ629-ID
QJ629-IT
QJ629-IM
QJ629-IV

SOFTWARE PRODUCT SERVICE
AGREEMENTS:

:l DE c support Service
.

I
I

Basic Service

l QJ628-GZ

QJ637-ID
QJ637-IM

QJ737-ID
QJ737-IM

'QJ738-9M
· QJ738-9D
i QJ738-9H
QJ738-9Q
QJ738-8M
: QJ738-8D
! QJ738-8H
QJ738-8Q

QJ637-9D
QJ637-9M

I QJ738-3M

QJ629-9M
QJ629-9V

:
I
I

1I
QJ676-9D
QJ676-9M

QJ737-8D
QJ737-8M

QJ676-8D
QJ676-8M

QJ629-8D
QJ629-8T
QJ629-8M
QJ629-8V l
QJ629-3D
QJ629-3T I
QJ629-3M
QJ629-3V

QJ637-8D
QJ637-8M

I
QJ637-3D
QJ637-3M

QJ737-3D
QJ737-3M

l
I

QJ676-3D
QJ676-3M

I
I

Source License and
Sources Distribution for Utilities

QJ638-ED
QJ638-EM

Source License and
Sources Listings for Utilities

' QJ638-FR

QJ638-FR

Source License and Sources
Listings** for Executive and 1/0
Device Driver

QJ628-FR

JSources Distribution for Utilities

QJ638-ND
QJ638-NM

lSources Listings for Utilities

QJ638-NR

Sources Listings for Executive
[and 1/0 Device Driver

QJ628-NR

QJ737-9D
QJ737-9M

l QJ738-3Q

QJ628-GZ

QJ676-ID
QJ676-IM

T QJ629-9D
QJ629-9T

! QJ738-3H

I QJ738-3D

SOURCE CODE AND MATERIALS
OPTIONS:

QJ628-GZ

l
Self-Maintenance Service

ORDER
NUMBER
RA60/
80/81
BASED
SYSTEMS

QJ638-ED
QJ638-EM

T QJ638-FR

QJ628-NR

lT
l

QJ638-ND
QJ638-NM

QJ638-NR

QJ628-NR

T QJ628-FR

l
l
lT

QJ638-ND
QJ638-NM

QJ638-NR
QJ628-NR

J
1

**The combination of Executive and Utilities sources does not necessarily comprise all the sources used by DIGITAL to build the
binary kits.

-9-