Digital PDFs

AA-2593G-TC

April 1983

354 pages

Original

16MB

Document:	RSX-11M/RSX-11S Information Directory and Master Index
Order Number:	AA-2593G-TC
Revision:	0
Pages:	354
Original Filename:	http://bitsavers.org/pdf/dec/pdp11/rsx11m_s/RSX11M_V4.1_Apr83/1_Introduction/AA-2593G-TC_masterIdx_198304.pdf

OCR Text

RSX-11 M/RSX-11 S
Information Directory and Master Index
Order No. AA-2593G-TC

READ THIS FIRST

RSX-11 M Version 4.1
RSX-11 S Version 4.1

digital equipment corporation · maynard, massachusetts

First Printing, December 1977
Revised, May 1979
Revised, January 1982
Revised, April 1983
The information in this document is subject to change without notice
and should not be construed as a commitment by Digital Equipment
Corporation. Digital Equipment Corporation assumes no responsibility
for any errors that may appear in this document.
The software described in this document is furnished under a license
and may be used or copied only in accordance with the terms of such
license.
No responsibility is assumed for the use or reliability of software on
equipment that is not supplied by Digital Equipment Corporation or its
affiliated companies.

The postpaid READER'S COMMENTS form on the last page of this document
requests the user's critical evaluation to assist in preparing future
documentation.
The following are trademarks of Digital Equipment Corporation:
DIBOL
EduSystem
IAS
MASS BUS
PDP
PDT
RSTS

DEC
DEC/CMS
DEC/MMS
DECnet
DECsystem-lo
DECSYSTEM-20
DEC US
DECwriter

RSX
UNIBUS
VAX
VMS
VT

mamama
ZK2252

HOW TO ORDER ADDITIONAL DOCUMENTATION
In Continental USA and Puerto Rico call

800-258-1710

In New Hampshire, Alaska, and Hawaii call
In Canada call

603-884-6660

613-234-7726 (Ottawa-Hull)
800-267-6146 (all other Canadian)

DIRECT MAIL ORDERS (USA & PUERTO RICO)*
Digital Equipment Corporation
P.O. Box CS2008
Nashua, New Hampshire 03061

DIRECT MAIL ORDERS (CANADA)
Digital Equipment of Canada Ltd.
940 Belfast Road
Ottawa, Ontario K1G 4C2
Attn: A&SG Business Manager

DIRECT MAIL ORDERS (INTERNATIONAL)
Digital Equipment Corporation
A&SG Business Manager
c/o Digital's local subsidiary or
approved distributor

*Any prepaid order from Puerto Rico must be placed
with the local Digital subsidiary (809-754-7575)
Internal orders should be placed through the Software Distribution Center (SOC). Digital Equipment
Corporation, Northboro, Massachusetts 01532

CONTENTS

Page
PREFACE

1.0
2.0
3e0

4.0
4.1

4 .1.1
4 .1. 2
4 .1. 3
4 .1. 4
4.2
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.3
4.3.1
4.3.2
4.3.3
4.4
4.4.1
4.4.2
4.4.3
4.4.4

4.4.5
4.4.6
4.4.7
4.5

4.5.1
4.5.2

4.5.3
4.6
4.6.1

4.6.2
4.6.3
4.6.4

GETTING STARTED • • • • • • • • • • • • • • •
• 1
HOW THE MANUALS ARE ORGANIZED • • • • • • • •
• 1
INTENDED READING AUDIENCES FOR RSX-llM/RSX-llS
MANUALS • • • • • • • • • • •
• • • •
• 3
RSX-llM DOCUMENTATION DESCRIPTIONS • • • •
• • 6
Volume 1: Introduction • • • • • • • • •
• 6
RSX-llM Software Product Description • •
• 6
RSX-llM/RSX-llS Information Directory and Master
Index . . . . . . . . . . . . . . . . . . . . . 6
RSX-llM/RMS-11/RSX-llS Release Notes • • • • • • 7
Introduction
to
RSX-llM
and
RSX-llM-PLUS 7
Volume 2: Operation • • • • • • • • • • • •
7
RSX-llM System Generation and Installation Guide 7
RSX-llM/M-PLUS MCR Operations Manual • • • • • • 7
RSX-llM/M-PLUS MCR Operations Manual Update
Notice No. 1 • • • • • • • • • • • • • • • • • • 7
RSX-llM/M-PLUS Command Language Manual • • • • • 8
RSX-llM/M-PLUS Batch and Queue Operations Manual 8
Volume 3: Utilities
•••••••••••• 8
RSX-llM/M-PLUS Utilities Manual
••••• 8
RSX-llM/M-PLUS Utilities Manual Update Notice
No. 1 • • . . . • • • •
• • • • • . • 9
EDT Editor Manual
• • • • • • •
9
Volume 4: Program Development • • • • • • • • • • 9
RSX-llM/M-PLUS Guide to Program Development • • 9
PDP-11
MACR0-11
Language
Reference
Manual • • •
10
Operations
IAS/RSX-11
I/O
Reference
Manual • •
10
IAS/RSX-11 System Library Routines Reference
Manual • •
10
IAS/RSX-11 ODT Reference Manual
10
RSX-llM/M-PLUS Task Builder Manual
10
RSX-llM/M-PLUS
Executive
Reference
Manual • • • • • • • • • • • • • • • • • • • • 11
11
Volume 5: I/O Drivers Development and Reference
RSX-llM Guide to Writing an I/O Driver • • • • 11
RSX-llM/M-PLUS
I/O
Drivers Reference
11
Manual • • • • • • • • • • • • • • •
RSX-llM/M-PLUS I/O Drivers Reference Manual
Update Notice No. 1 • • • • • • • • • • • • • 11
Volume 6: System Management and Maintenance
12
RSX-llM/M-PLUS System Management Guide • • • • 12
RSX-llM/M-PLUS System Management Guide Update
Notice No. 1 • • • • • • • • • • • • • • • • • 12
RSX-llM/M-PLUS Error Logging Manual
13
RSX-llM/M-PLUS Crash Dump Analyzer
Reference Manual
• • • • • • • • • •
13

iii

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX

4.7
4.7.1
4.7.2
4.7.3
4.7.4
4.8
4.9
4.10
5.0
5.1
5.2
5.2.1
5.2.2
5.2.3
5.3
6.0
6.1
6.2

Page

Volume 7: PDP-11 Record Management Services
13
RSX-llM/M-PLUS RMS-11: An Introduction • •
13
RSX-llM/M-PLUS RMS-11 User's Guide • ~ • •
13
RSX-llM/M-PLUS RMS-11 Utilities • • • • • • • 14
RSX-llM/M-PLUS RMS-11 Macro Programmmer's Guide 14
RSX-llM Mini-Reference • •
15
EDT Editor Reference Card • • • • • •
15
PDP-11 Programming Card • • • • • • • • • • • • 15
RSX-llS DOCUMENTATION
• • • • • • • • • • • 15
How the RSX-llS Manuals Are Organized
16
RSX-llS-Specific Manuals • • • • • • • •
• • 16
RSX-llS Software Product Description '{Order No.
AE-3427N-TC) • • • • • • • • • • • • • • • • • 16
RSX-llS System Generation and Installation
16
Guide {Order No. AA-2874E-TC)
• • • • • •
RSX-llS System Generation and Installation
Guide Update Notice No. 1 {Order No.
17
AD-2874E-51) • • • • • • • • •
• •••
17
Host System Manuals • • • • • • • • •
INTRODUCTION TO THE MASTER INDEX • • • • • • • • • 18
Format of the Master Index • • • • • • • • • • 18
Manuals Included in the Master Index
19

MASTER INDEX

FIGURES
FIGURE

Suggested Sequence for Reading RSX-llM/RSX-llS
Manuals • • • • •
• • • • • • • • • • • • • • • 2

TABLES
TABLE

RSX-llM Documentation Set

••••••••.•••• 3

PREFACE

MANUAL OBJECTIVES
The RSX-llM/RSX-llS Information Directory and Master Index introduces
the RSX-llM and RSX-llS documentation sets. It includes an overview
of all the manuals and a Master Index that will be useful for
referring to topics throughout the documentation. The descriptions of
the manuals are intentionally brief;
refer to the prefaces of
individual manuals for additional information. Read the Information
Directory before you read other manuals in the documentation set or
use the system.

INTENDED AUDIENCE
The RSX-llM/RSX-llS Information Directory and Master ~ is intended
for all users of the RSX-llM and RSX-llS operating systems. No
previous knowledge of the systems is required.

STRUCTURE OF THIS DOCUMENT
The first part of the manual briefly describes the documents in the
set.
It tells which kinds of users are likely to be interested in
which documents, and suggests a sequence for reading them. The second
part of the manual is a Master Index to all the documents.

ASSOCIATED DOCUMENTS
The next manual you should read in this documentation set is the
RSX-llM/RMS-11/RSX-llS Release Notes, which will give you important
information on the RSX-llM and RSX-llS software and documentation.

RSX-llM/RSX-llS IRFORMATION DIRECTORY AND fLtASTER INDEX

1.0

GETTING STARTED

Your kit contains an RSX-llM/RSX-llS baseline system that is ready to
run on your PDP-11 processor. You will use this baseline system to
generate an operating system tailored to your own particular hardware
and software requirements.
Before beginning system generation, you should become familiar with
your hardware configuration and with this documentation set;
and you
should thoroughly read the RSX-llM/RMS-11/RSX-llS Release Notes and
the appropriate System Generation and Installation Guide (RSX=llM or
RSX-llS). Then you will be prepared to choose among the options
offered during system generation.
Figure 1 outlines a suggested sequence for reading the manuals in your
documentation set. The sequence is from introductory and more general
manuals to advanced manuals that assume a greater understanding of the
system.

2.0

HOW THE MANUALS ARE ORGANIZED

The RSX-llM manuals are organized into seven volumes:
1.

Introduction

Operation

Utilities

Program Development

I/O Drivers Development and Reference

System Management and Maintenance

PDP-11 Record Management Services

RSX-llS users should refer to Section 5.0 for the organization of
RSX-llS documentation set.

the

Each volume consists of one or more ring binders, and each binder
contains two or more manuals. Refer to Table 1 for a complete list of
the manuals.
The EDT Editor Reference Card and the PDP-11 Programming Card are
packaged separately;
t~RSX-llM
Mini-Reference is also separate,
coming with its own small binder.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX

RSX-11M/RSX-11S INFORMATION
DIRECTORY AND MASTER INDEX
RSX-11M/RMS-11/RSX-11S RELEASE NOTES

I
INTRODUCTION
TO RSX-11 M AND RSX-11 M-PLUS

RSX-11M/M-PLUS
COMMAND LANGUAGE MANUAL

RSX-11 M/M-PLUS
MCR OPERATIONS MANUAL

l
RSX-11 M/M-PLUS
UTILITIES MANUAL

RSX-11 M/M-PLUS
BATCH AND QUEUE OPERATIONS MANUAL
EDT EDITOR
MANUAL

l
RSX-11 M/M-PLUS
GUIDE TO PROGRAM DEVELOPMENT
PDP-11 MACR0-11 LANGUAGE
REFERENCE MANUAL
RSX-11M/M-PLUS TASK BUILDER MANUAL
IAS/RSX-11 ODT REFERENCE MANUAL

I
IAS/RSX-11
SYSTEM LIBRARY ROUTINES
REFERENCE MANUAL

RSX-11 M/M-PLUS
ERROR LOGGING MANUAL

RSX-11 MIM-PLUS
EXECUTIVE REFERENCE MANUAL

1
r

IASIRSX-11
i/O OPERATIONS REFERENCE MANUAL
RSX-11 M/M-PLUS
110 DRIVERS REFERENCE MANUAL
RSX-11M
GUIDE TO WRITING AN 1/0 DRIVER

RSX-11 M/M-PLUS
CRASH DUMP ANALYZER REFERENCE
MANUAL

RMS-11: AN INTRODUCT!ON

RMS-11 USER'S GUIDE
RMS-11 UTILITIES
RMS-11 MACRO PROGRAMMER'S GUIDE

I
RSX-11M
SYSTEM GENERATION AND INSTALLATION GUIDE
RSX-11 M/M-PLUS
SYSTEM MANAGEMENT GUIDE

ZK-169-81

Figure 1

Suggested Sequence for Reading RSX-llM/RSX-llS Manuals

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
3.0

INTENDED READING AUDIENCES FOR RSX-llM/RSX-llS MANUALS

Table 1 lists the intended reading audience for each document in your
set.
The audience is divided into the loosely defined groups listed
as follows (and indicated in Table 1 by an X in one or more of the
columns):
US

The user: anyone who types at a terminal on an
RSX-llS operating system.

RSX-llM

The applications programmer: anyone who uses the MACR0-11
assembly language or a high-level language to develop
programs for user applications.

The system programmer:
anyone who uses
maintain,
modify,
and
develop software
applications programmer or the user.

The system manager:
the
person
familiar
with
and
responsible for overall operation of an RSX-llM or RSX-llS
system and its associated hardware.

MACR0-11
used by

to
the

Table 1 lists the manuals that are RSX-llM-specific and also those
that are common to RSX-llM and RSX-llS. RSX-llS users should refer to
section 5.0 for a descriptive list of the manuals included in the
RSX-llS documentation set.
Table 1
RSX-llM Documentation Set
Kit Number QJ628-GZ

Volume

Title and Order Number

Suggested Audience
SP
SM
us
AP

Bandy Reference Materials
RSX-llM Mini-Reference
AV-5570E-TC

EDT Editor Reference Card
AV-J756A-TC

RSX-llM Software Product Description x
AE-3407U-TC

RSX-llM/RMS-11/RSX-llS Release Notes x
AA-2573H-TC

PDP-11 Programming Card
EH-Sl046-78
1

Introduction

RSX-llM/RSX-llS Information
Directory and Master Index
AA-2593G-TC

Introduction to RSX-llM and
RSX-llM-PLUS
AA-L763A-TC

(continued on next page)

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
Table 1 (Cont.)
RSX-llM Documentation Set
Kit Number QJ628-GZ

Volume
2

Suggested Audience
AP
SM
SP

Title and Order Number
Operation
RSX-llM System Generation and
Installation Guide
AA-H625C-TC

RSX-llM/M-PLUS Command Language
Manual
AA-L672B-TC

RSX-llM/M-PLUS Batch and Queue
Operations Manual
AA-L671A-TC

RSX-llM/M-PLUS MCR Operations
Manual
AA-L678A-TC

RSX-llM/M-PLUS MCR Operations
Manual
Update Notice Number 1
AD-L678A-Tl

I
I

Utilities

I
I

I x

, PDP-11 MACR0-11 Language
Reference Manual
AA-V027A-TC

IAS/RSX-11 I/O Operations
Reference Manual
AA-Ml76A-TC

RSX-llM I M-PLUS Utilities Manual
AA-L681A-TC

I
I

RSX-llM/M-PLUS Utilities Manual
Update Notice Number l
AD-L681A-Tl

IIx

EDT Editor Manual
AA-J726A-TC
4

Program Development
RSX-llM/M-PLUS Guide to Program
Development
AA-L676A-TC

IAS/RSX-11 System Library Routines
Reference Manual
AA-55808-TC

I x I x

(continued on next page)

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
Table 1 {Cont.)
RSX-llM Documentation Set
Kit Number QJ628-GZ

Volume

Suggested Audience
SM
AP
SP

Title and Order Number
IAS/RSX-11 ODT Reference Manual
AA-M507A-TC

RSX-llM/M-PLUS Task Builder Manual
AA-L680B-TC

I RSX-llM/M-PLUS Executive Reference
I Manual

AA-L675A-TC

I
I

I/O Drivers Development and Reference

RSX-llM Guide to Writing an I/O
Driver
AA-2600E-TC

RSX-llM/M-PLUS I/0 Drivers
Reference Manual
Update Notice Number 1
AD-L677A-Tl

System Management and Maintenance

RSX-llM/M-PLUS I/O Drivers
Reference Manual
AA-L677A-TC

RSX-llM/M-PLUS Error Logging
Manual
AA-L674B-TC

RSX-llM/M-PLUS Crash Dump Analyzer
Reference Manual
AA-L673B-TC

RSX-llM/M-PLUS System
Management Guide
AA-L679B-TC
RSX-llM/M-PLUS System Management
Guide
Update Notice Number 1
AD-L679B-Tl

PDP-11 Record Management Services
RSX-llM/M-PLUS RMS-11: An
Introduction
AA-L682A-TC

(continued on next page)

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
Table 1 (Cont.)
RSX-llM Documentation Set
Kit Number QJ628-GZ

Title and Order Number

Volume

Suggested Audience
SM
AP
SP

RSX-llM/M-PLUS RMS-11
Utilities
AA-L670A-TC
RSX-llM/M-PLUS RMS-11 Macro
Programmer's Guide
AA-L668A-TC

4.0

RSX-llM/M-PLUS RMS-11
User's Guide
AA-L669A-TC

RSX-llM DOCUMENTATION DESCRIPTIONS

Following are brief descriptions of the volumes and the individual
manuals in the RSX-llM documentation set.
For a complete description
of any manual, read its preface.
RSX-llS users should now refer to Section 5.0 for a list of the
documents included in their RSX-llS set (most of which are common to
RSX-llS and RSX-llM), and then return to Section 4.0 for descriptions.
{The two RSX-llS-specific documents are described in Section 5.0
only.)

4.1

Volume 1:

Introduction

This volume includes manuals that introduce the RSX-llM
set and operating system.

documentation

4.1.1 RSX-llM Software Product Description - The Software Product
Description
(SPD)
concisely describes the functional characteristics
and system environment of RSX-llM.
It identifies the required and
optional hardware and software along with the available training
credits and additional services.
It
includes
information
on
installation requirements and software product support, and gives
ordering information.

4.1.2 RSX-llM/RSX-llS Information Directory and Master Index - This
manual orients the reader to the RSX-llM/RSX-llS documentation set.
It includes descriptions of the manuals, a suggested sequence for
reading them, their intended audiences, and a Master Index to the
documentation set. The Master Index should prove very useful:
It
comprises all the topics in the individual manuals' indexes, without
abridgement, and will tell you which manual(s) and page number(s) have
the information you need on a topic.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
4.1.3 RSX-llM/RMS-11/RSX-llS Release Notes - This manual is crucial,
as it summarizes the new software features for RSX-llM Version 4.1 and
RSX-llS Version 4.1, as well as RMS-11 version 2.0.
It tells you
which manuals to go to for complete information on these new features.
Incompatibilities between the current and previous versions are
discussed;
and procedures are described for applying corrections to
files on the source disk and reporting any problems of the new
software.
Be sure to read the Release Notes before generating and
using your system.

4.1.4 Introduction
to
RSX-llM
and
RSX-llM-PLUS - This
tutorial manual is a simple, step-by-step introduction for new users
of the RSX-llM and RSX-ilM-PLUS operating systems.
In an interactive
terminal session,
using prepared demonstration files, new users can
log in and learn by practicing. The DIGITAL Command Language, the
interactive text editor EDT, and the program development facilities
are demonstrated.
After guiding the user through the practice
session, the manual discusses some general system concepts and
features.
It has a useful glossary that defines system terms in some
detail=

4.2

Volume 2:

Operation

The operation volume explains how to generate and install your RSX-llM
Version 4.1 system.
It also· documents the Monitor Console Routine
(MCR) , the DIGITAL Command Language
(DCL) , and batch and queue
operations.

4.2.1 RSX-llM System Generation and Installation Guide - This manual
is a step-by-step guide to the system generation procedure.
It
outlines procedures for bootstrap-loading a baseline system, and
explains the SYSGEN questions and the results that occur from your
responses. Annotated examples of system generations are given.

4.2.2 RSX-llM/M-PLUS MCR Operations Manual - This manual describes
the Monitor Console Routine {MCR) and the Indirect Command Processor
(Indirect).
MCR is a command line interpreter, an interface for communication
between you and the RSX-llM system.
This manual describes MCR
commands and their formats and tells you how to use MCR.
File
ownership and file protection are explained. An alphabetical list of
MCR and TKTN (Task Termination Notification program) messages is given
in an appendix.
Indirect allows you to process files that contain Indirect, MCR, DCL,
or utility commands. These commands are executed as though they had
been entered from a terminal.
The Indirect chapter describes the
Indirect
commands, symbols, and functions,
and presents actual
examples.

4.2.3 RSX-llM/M-PLUS MCR Operations Manual Update Notice No.
1 This uodate corrects errors in the manual and documents new features
and devices.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
4.2.4 RSX-llM/M-PLUS Command Language Manual - You may prefer to use
the DIGITAL Command Language (DCL}, rather than MCR, to communicate
with the RSX-llM system. DCL provides direct, transparent access to
most common MCR and utility functions. This manual is organized by
system functions;
it gives full descriptions of all DCL commands,
with examples and notes on their usage.

4.2.5 RSX-llM/M-PLUS Batch and Queue Operations Manual - This manual
explains the use of the Queue Manager (QMG) to control print queue
functions, and describes in detail the QMG commands that control these
functions. Error messages are explained in the appendix, and there is
a glossary of terms.

4.3

Volume 3:

Utilities

This volume contains two manuals, the RSX-llM/M-PLUS Utilities Manual
and the EDT Editor Manual.
The RSX-llM/M-PLUS Utilities Manual
describes utilities that allow you to manipulate different kinds of
files and their contents and perform operations on supported media.
The EDT Editor Manual describes the function and operation of the
interactive text editor EDT.

4.3.1 RSX-llM/M-PLUS Utilities Manual - This
functions and operations of the following
programs:

manual describes the
RSX-llM/M-PLUS utility

•

EDI - Line Text Editor. EDI is a line-oriented, interactive
editor used to create and maintain text and source files.

•

PIP - Peripheral Interchange Program.
performs file control functions.

•

FLX - File Transfer Utility Program. FLX is a file transfer
and format conversion program that transfers files among
DOS-11, RT-11, and Files-11 volumes.

•

FMT - Disk Volume Formatter Utility.
several types of Files-11 disks~

•

BAD - Bad Block Locator Utility. BAD determines
and location of bad blocks on a volume.

•

BRU - Backup and Restore Utility.
Backing up files both
compresses the files and safeguards them against loss. BRU
backs up files from a Files-11 volume to one or more backup
volumes, and retrieves them as needed.

•

DSC - Disk Save and Compress Utility Program.
DSC copies
Files-11 disk files to tape or disk, and from DSC-created tape
back to disk.
(DSC's functions are largely similar to BRU's.}

•

VFY - File Structure Verification Utility. VFY verifies the
consistency and validity of the file structure on a Files-11
volume.

•

LBR - Librarian Utility Program. LBR is a library maintenance
program that creates and modifies library files.

PIP

copies

files

and

FMT formats and verifies
the

number

RSX-llM/RSX-115 INFORMATION DIRECTORY AND MASTER INDEX
•

DMP - File Dump Utility Program.
DMP is a file listing
program that allows you to examine the contents of a single
file or a volume of files.

•

CMP - File Compare Utility.
CMP compares two text files,
record by record, and lists the differences between them.

- Source Language Input Program. SLP is a noninteractive
• SLP
editing program that is used to maintain and edit source
files.
•

PAT - Object Module Patch Utility.
relocatable binary object modules.

PAT updates,

patches,

ZAP - Task/File Patch Program.
ZAP is a patch utility that
examines and directly modifies locations in a task image file
or data file.

For each utility in turn, this manual explains the utility's use,
describes its commands and switches, and gives detailed command
formats and syntax rules.

4.3.2 RSX-llM/M-PLUS Utilities Manual Update Notice No.
1 - This
update concerns two utilities, BRU and ZAP.
It documents BRU's new
multivolume disk operations, lists new BRU error messages, and gives
new examples.
For ZAP, it adds a description of the /LI switch and rand D-space tasks and gives new examples.

4.3.3 EDT Editor Manual - This manual explains how to use the
interactive text editor EDT to create and update ASCII text files.
It
explains the command line, keypad editing, line editing, nokeypad
editing, and the redefining of keys.
It also presents sample editing
sessions.

4.4

Volume 4:

Program Development

The first manual in this volume gives an overview of the program
development process.
The remaining manuals further explain the
process by describing the MACR0-11 assembly language, I/O operations,
system library routines, the On-Line Debugging Tool, the Task Builder,
and the Executive.

4.4.1 RSX-llM/M-PLUS Guide to Program Development - This manual is a
step-by-step guide to program development for the beginning MACR0-11
programmer. The manual describes the hardware and software necessary
for
program development and explains how to create, assemble,
task-build, debug, and maintain MACR0-11 programs.
It also introduces
the use of the Librarian Utility Program (LBR) for creating and
maintaining user, macro, and object libraries. A brief description of
FORTRAN program development is included,
to orient the FORTRAN
programmer.
Examples are given for all steps in the
program
development process.
This guide is intended to be used together with other, more advanced
this manual can
manuals until you become familiar with the process;
then serve as a refresher.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
4.4.2 PDP-11
MACR0-11
Language
Reference Manual - This manual
describes how to use the MACR0-11 Assembler to code MACR0-11 programs.
It includes descriptions of MACR0-11 features,
directives
for
conditional assembly and program sectioning, and user-defined and
system macro libraries.
It also
documents
RSX-llM
operating
procedures and error messages.
Before reading the MACR0-11 Language
Reference Manual, you should be familiar with your PDP-11 processor
and the related terminology, as presented in the PDP-11 Processor
Handbook.

4.4.3 IAS/RSX-11
I/O
Operations
Reference Manual - This manual
provides reference material on RSX-llM File Control Services (FCS) •
It explains how to use FCS to create, use, and delete files under
program control.
You should be familiar with MACR0-11 or FORTRAN
program development procedures before using FCS.
The manual also describes the following:
•

The Get Command Line subroutine
(GCML) - GCML provides a
device-independent interface for user programs retrieving
command lines from either a terminal or a disk file.

•

The Command String Interpreter
(CS!) - CS! parses
lines containing file specifications and switches.

•

The Table-Driven Parser (TPARS) - TPARS parses command lines
at two levels, a syntactical level and a semantic level.
It
is generated by user-generated parse tables.

command

Descriptions of ANSI magtape support, unlabeled tape support, and
MAG SET command are included.

the

4.4.4 IAS/RSX-11 System Library Routines Reference Manual - This
manual describes register handling and arithmetic routines, input and
output data conversion routines, output formatting
routines, and
dynamic memory management and virtual memory management routines.
For
the more experienced programmer, a
list of summary procedures is
included~

4.4.S IAS/RSX-11 ODT Reference Manual - This manual describes the use
of the On-Line Debugging Tool (ODT) for debugging a task. Actual ODT
command sequences are given, followed by explanatory text.
Before
reading this manual, you should be familiar with the MACR0-11 assembly
language and the Task Builder.

4.4.6 RSX-llM/M-PLUS Task Builder Manual - This manual describes the
concepts and capabilities of the RSX-llM/M-PLUS Task Builder (TKB),
the linker that produces executable task images
(programs that are
ready to be installed and run}.
It contains both programmer reference
and operating information, including Task Builder allocation of
virtual address space,
resolution of global symbols, overlaying
capability, and the building of shared regions.
Before reading this manual, you should be familiar with the procedures
described
in the RSX-llM/M-PLUS MCR Operations Manual and the
RSX-llM/M-PLUS Command Language Manual, as well as the programming
concepts discussed in the RSX-llM/M-PLUS Guide to Program Development.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
4.4.7 RSX-llM/M-PLUS
Executive
Reference
Manual - This manual
describes the RSX-llM/M-PLUS Executive services available for user
tasks and the Executive (system) directives you need to obtain them.
You must know how to develop user programs in MACR0-11 or FORTRAN to
be able to use the Executive services.

4.5

Volume 5:

I/O Drivers Development and Reference

This volume consists of manuals that describe
function of I/O drivers on an RSX-llM system.

the

writing

and

the

4.5.1 RSX-llM Guide to Writing an I/O Driver - This guide is an aid
in writing an I/O driver to service a peripheral device for which
DIGITAL does not supply a driver.
It includes information on
incorporating a user-written driver in a system, and on debugging a
driver with the Executive Debugging Tool
{XDT).
A summary of
Executive routines that a driver can call is provided.
The manual assumes that you fully understand the operation of the
device for which you require a driver. You must also be familiar with
your PDP-11 processor, its peripheral devices, and the software
supplied with the RSX-llM system.

4.5.2 RSX-llM/M-PLUS
I/O
Drivers Reference Manual - This manual
describes the functions of all DIGITAL-supplied I/O drivers.
It
provides the data needed by the experienced programmer who wants the
advantages in space and time of directly interfacing with I/O drivers.
This manual describes the Files-11 Ancillary Control
Processor
(FllACP)
and the Magtape Ancillary Control Processor (MTAACP) and
documents the QIOs performed by these processors.

4.5.3 RSX-llM/M-PLUS I/O Drivers Reference Manual Update Notice No.
1 - This update corrects errors in the manual and includes the
following new device support:
•

Terminal driver support has been added for the DHVll
interface and the LQP02 and LASO terminals.

terminal

Disk driver support has been added for the following new disk
• devices:
UDA50/RA81
UDA50/RA60
RC25
RD51
RXSO
tape driver support has been added for the
• Magnetic
TSVOS.
•

TU80

Line printer driver support has been added for the LNOl
printer.

and
laser

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
4.6

Volume 6:

System Management and Maintenance

This volume consists of a set of manuals that tell you how to ensure
that your system operates correctly and effectively. The manuals
describe system management programs and the RSX-llM/M-PLUS Error
Logging System, and explain how to use diagnostic software and how to
retrieve information to determine the causes of system crashes.

4.6.1 RSX-llM/M-PLUS System Management Guide - This manual documents
the following programs that the system manager can use to test,
monitor, maintain, and customize an RSX-llM operating system:
- Account File Maintenance Program: You use this program
• ACNT
to create and maintain accounts on multiuser protection
systems.
•

CODRV and COT - Console Logger: This program handles I/O to
the console output device and records system messages at a
terminal and/or in a log file.

•

IOX - I/O Exerciser: This program detects and
problems on tape and disk units.

diagnoses

I/O

- Bad Block Replacement Control Task: This task performs
• RCT
bad block handling and recovery on Mass Storage Control
Protocol devices.
•

RMD - Resource Monitoring Display:
This program displays
information about your system's active tasks and available
resources,

•

SHUTUP - System shutdown task:
system in an orderly fashion.

•

UETP - user Environment Test Package:
You can run this
program after system generation, to verify that you have
generated a working operating system, or at any other time, to
validate the proper functioning of the operating system.

•

VMR - Virtual Monitor Console Routine:
VMR consists of a
subset of MCR commands that you can use to alter a system
image file.

SHF - Shuffler:
system-controlled
occurs.

This

task

shuts

down

the

This
task
compresses
space
in
partitions when a memory allocation failure

The manual includes information on pool monitoring support and the PMT
program;
how to set up and run the Queue Manager; how to extend and
alter DCL; and how to write command line interpreters (CLis).
The
serial despooler is described in an appendix.

4.6.2 RSX-llM/M-PLUS System Management Guide Update Notice No.
1 This update primarily concerns VMR.
It corrects errors in the manual
and documents new features and devices.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
4.6.3 RSX-llM/M-PLUS Error Logging Manual - This manual explains the
RSX-llM/M-PLUS Error Logging System, a combination of tasks that
collect and report information about hardware-related events on an
RSX-llM system. The Error Logging System allows you to generate event
reports in brief or full format, including information on the state of
the system or hardware at the time the event occurred.
The manual includes chapters on:
•

Using the Error Log Task (ERRLOG) and the Error Log Interface
(ELI).
ERRLOG gets error information from the Executive and
drivers and writes the information into the Error Log File,
and ELI sends user commands to ERRLOG.

•

Using the Report Generator (RPT) to generate Error Log Reports
from the Error Log File.

•

Using the Control File Language compiler (CFL)
procedures to
update and modify DIGITAL-supplied control file modules, or to
add error-logging support for non-DIGITAL devices.

4.6.4 RSX-llM/M-PLUS Crash Dump Analyzer Reference Manual - This
manual explains how to use the Crash Dump Analyzer (CDA) to determine
the causes of system crashes.
It contains operating instructions,
descriptions of CDA switches and error messages, examples of CDA
output listings, and an explanation of how to interpret the- output
listings. The manual also includes system symbolic and data structure
macro definitions.

4.7

Volume 7:

PDP-11 Record Management Services

This volume is composed of a set of manuals that describe the Record
Management Services (RMS-11).
For information on where the RMS-11
files and utilities can be found on the RSX-llM distribution kit, see
the RSX-llM System Generation and Installation Guide.

4.7.1 RSX-llM/M-PLUS
RMS-11:
An
Introduction - This
manual
introduces the major concepts of RMS-11:
record formats, file
organizations, and record access modes.
It introduces the RMS-11
operations and utility programs, and defines the key terms necessary
to understand RMS-11 capabilities and functions.
The manual is intended for all users of RMS-11,
including both
MACR0-11 and high-level language programmers. Nonprogramming users,
programming users who are new to RSX-llM/M-PLUS, and RSX-llM/M-PLUS
programmers who are new to RMS-11 should find this document especially
useful.
The manual does not provide reference or usage information, but should
be read before the other RMS-11 documents.

4.7.2 RSX-llM/M-PLUS RMS-11 User's Guide - This manual is a guide to
using RMS-11 in file and task design for application programs written
in either MACR0-11 or high-level languages.
It is intended for
"'!!ll""'""'i.;,,...~~.;,..."'"'

Qt'.t'.L..1.VQ'-..1.Ull

-nr,..,,..,,.~"'""~,,.~

t'.&.V':J.LQILUU'C;;',L,a;;J

T...,hn
'ft.L.&V

t..7:tn+-

"""'"""""

'-"'

!=t,..h;.a..:7o

""''-"".&..&•YY'W

nn~;m.:::.1

VJ:"W ... UI._...._

norFnrm.:::rin,...o
l:'.._ ..... ..., ..... H .... .a.I""""""

with a new application they are writing or with
application that no longer performs satisfactorily.

oit-hor
--._,...,_..,

existing

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
The manual first presents general design considerations to help users
select the appropriate file organization for their applications. Then
the details of file structure, design, and processing are discussed
for
each of the three RMS-11
file organizations:
sequential,
relative, and indexed. Finally, the manual describes techniques that
can be used to optimize application program performance, regardless of
file organization.
Note that only MACR0-11 programmers can use the full
set of RMS-11
capabilities.
Subsets
of those capabilities are available to
high-level language programmers.
Programmers
who
are
writing
applications in high-level languages should consult their language
documentation for details on RMS-11 support.

4.7.3 RSX-llM/M-PLUS
RMS-11
Utilities - This
reference
manual
describes the utility programs supported by RMS-11.
It is intended
for users such as high-level language programmers and nonprogramming
users
(system managers and operators, for example) who either do not
require or do not have access to the full set of RMS-11 capabilities.
The RMS-11 utility programs are the following:
•

RMS-11 File Design Utility (RMSDES) - An interactive utility
for designing and creating sequential, relative, and indexed
files.

•

RMS-11 Indexed File Load Utility (RMSIFL) - Reads records from
an RMS-11 file of any kind of organization and loads them into
an indexed file, optimizing all
indexes, both primary and
alternates (if any).

•

RMS-11 File Conversion Utility (RMSCNV) - Reads records from
an RMS-11 file of any organization and loads them into another
RMS-11 file of any organization.
Note that RMSCNV, unlike
RMSIFL, optimizes only the primary index when it loads an
indexed file.

•

RMS-11 File Display Utility (RMSDSP) - Produces a concise
description of any RMS-11 file, including backup files.

•

RMS-11 File Back-Up Utility (RMSBCK) - Transfers the contents
of an RMS-11 file to another file, en another device, to
preserve it should the original file be lost or damaged.

•

RMS-11 File Restoration Utility (RMSRST) - Restores files that
were backed up by RMSBCK, so that they can be accessed by user
programs.

The manual also documents RMSDEF, which has been superseded by RMSDESe

4.7.4 RSX-llM/M-PLUS RMS-11 Macro Programmmer's Guide - This document
is a
reference manual describing the macros and symbols that make up
the interface between a MACR0-11 program and the RMS-11 operation
routines.
It is intended for both MACR0-11 programmers and for
high-level language programmers who want to use the full set of RMS-11
capabilities in a MACR0-11 subprogram.
The manual presents such programming considerations as how to use
RMS-11 macros and symbols in a MACR0-11 program, how to use the
directory and file operations to process directories and files. and
how to use the stream operations and record or block operations to
process records or blocks.
14

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
Detailed reference information is provided on each RMS-11 operation
macro, the control blocks it uses, the options that can be specified
in each control block field: and the values returned in control block
fields.
A summary of each control block, field, value, and mask is
also provided.
In addition, the manual documents the RMS-11 completion
error codes, and assembly-time messages.

4.8

codes,

fatal

RSX-llM Mini-Reference

This small manual is a convenient reference for all system users.
It
includes sections on the Monitor Console Routine (MCR), the DIGITAL
Command Language (DCL) , the Task Builder
{TKB) ,
the RSX-llM/M-PLUS
utilities, the On-Line Debugging Tool {ODT), the Error Logging System,
the Queue Manager (QMG), the I/O error codes, the directive error
codes, the Executive directive summary, the RMS-11 utilities, and the
RMS-11 error codes. The manual also includes Radix-SO conversion
tables and the ASCII character set.

4.9

EDT Editor Reference Card

This reference card describes keypad editing for the DIGITAL VT52 and
VTlOO video terminals.
It presents common keyboard functions and
gives instructions for beginning and ending an editing session.
Keypad diagrams for the VT52 and VTlOO terminals are included.

4.10

PDP-11 Programming Card

This card includes programming
topics:

5.0

information

the

following

•

PDP-11 addressing modes

•

Single operand instructions

•

Double operand instructions

•

Processor register addresses

•

Device register addresses

7-bit ASCII code

•

Bootstrap loader starting addresses and device vectors

major

RSX-llS DOCUMENTATION

Included with the RSX-118 software is the R8X-118 documentation set.
This set of manuals describes the host operating system as well as the
R8X-118 operating system. It is important that you read thoroughly
the R8X-11M/RM8-ll/R8X-118 Release Notes before reading other manuals
in the documentation set and generating your system.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
This section briefly describes the RSX-llS manuals.
See Table 1 for
the manuals'
order numbers and intended audiences, and see Section 4
for fuller descriptions of their contents.
(Two documents, however,
are found exclusively in the RSX-llS set and hence are not included
with the RSX-llM/RSX-115 documents in Table 1 and Section 4:
the
RSX-llS Software Product Description and the RSX-llS System Generation
and Installation Guide.
Information on these two documents is given
TrlSection 5.2.) ~~The Kit Number for the RSX-llS documentation set is QJ642-GZ.

5.1

Bow the RSX-118 Manuals Are Organized

The RSX-115 manuals are organized into five volumes:

5.2

Introduction

Operation

Program Development

I/O Drivers Development and Reference

System Management and Maintenance

RSX-llS-Specific Manuals

The RSX-llS Software Product Description and the RSX-llS System
Generation and Installation Guide are found exclusively in the RSX-115
documentation set and therefore have not been previously described
in
this manual.

5.2.1

RSX-llS Software Product Description (Order No.

AE-3427N-TC) -

The
Software Product Description
(SPD)
concisely describes the
functional characteristics and system environment of RSX-llS.
It
identifies the required and optional hardware and software, along with
the available training credits and additional services.
It includes

information on installation requirements and software product support,
and gives ordering information.
This document is intended for all RSX-118 users.

5.2.2 RSX-llS System Generation

and

Installation

Guide

(Order

No.

AA-2874E-TC)
- This manual describes the RSX-llS operating system and
explains how to use a host system for generating an RSX-llS operating
system.
It
also describes RSX-llS supplied software and the
distribution kit.
Error messages are included in an appendix. Before
reading this manual, you should be familiar with the introductory
manuals in the documentation set and, in particular, with the system
generation procedures for the host system.
This manual is intended for
managers.

use

system

programmers

and

system

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
5.2.3 RSX-llS System Generation and Installation Guide Update Notice
No.
1
(Order No.
AD-2874E-Tl)
This update reflects software
changes and additions made in VAX/VMS Version 3.0.

5.3

Host System Manuals

The manuals and reference card included in the following list are
shipped with your software. Although they are also shipped with other
operating systems, they include important information applicable to
RSX-llS.
Refer to the preceding sections of this manual and to the
prefaces of individual manuals for complete descriptions.
•

RSX-llM Mini-Reference. This small
reference for all system users.

•

PDP-11 Programming Card.
programming information.

Volume 1:

manual

convenient

This reference card gives

important

Introduction

•

RSX-llM/RSX-llS Information Directory and Master Index.
manual introduces the RSX-llS documentation set.

•

RSX-llM/RMS-11/RSX-llS Release Notes. This manual summarizes
new software features for RSX-llS Version 4.1 and should be
read before the system is generated.

Volume 2:

This

Operation

•

RSX-llM System Generation and Installation Guide.
RSX-llS
SYSGEN Phase I
is a subs~of RSX-llM SYSGEN Phase I.
This
manual includes a description of the Phase I questions.

•

RSX-llM/M-PLUS MCR Operations Manual. RSX-llS uses a subset
of MCR called Basic MCR.
This manual gives descriptions of
the MCR commands;
the RSX-llS
System
Generation
and
Installation Guide includes summary descriptions.

RSX-llM/M-PLUS MCR Operations Manual Update Notice No.
1.
This update corrects errors in the manual and documents new
features and devices.

Volume 3:
•

Program Development

RSX-llM/M-PLUS Guide to Program Development.
step-by-step guide to program development.

This manual is a

PDP-11 MACR0-11 Language Reference Manual.
This
manual
• describes
how to use the MACR0-11 Assembler to code MACR0-11
programs.
•

IAS/RSX-11 I/O Operations Reference Manual.
RSX-llS uses a
subset of FCS and its macro calls.
This manual fully
describes FCS.

•

IAS/RSX-11 System Library Routines Reference Manual.
This
manual describes the system library routines available for
inclusion in programs written in MACR0-11 assembly language.

•

IAS/RSX-11 ODT Reference Manual.
This manual describes how to
use the On-Line Debugging Tool to debug programs.

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
•

RSX-llM/M-PLUS Task Builder Manual.
This manual describes the
concepts and capabilities of the Task Builder.

•

RSX-llM/M-PLUS Executive Reference Manual.
This
manual
describes the Executive services available for user tasks.

Volume 4:
•

RSX-llM Guide to Writing an I/O Driver.
in writing an I/O driver.

•

RSX-llM/M-PLUS I/O Drivers Reference Manual.
This manual
describes the functions of all DIGITAL-supplied I/0 drivers.

•

RSX-llM/M-PLUS I/O Drivers Reference Manual Update Notice No.
1.
The update-COrrects errors in the manual and includes new
device support.

Volume 5:

6.0

I/O Drivers Development and Reference
This guide is an

aid

System Management and Maintenance

•

RSX-llM/M-PLUS System Management Guide. This manual includes
a description of VMR, which is used during RSX-llS system
generation and installation.

•

RSX-llM/M-PLUS System Management Guide Update Notice No.
1.
This update corrects errors in the manual and documents new
features and devices.

•

RSX-llM/M-PLUS Crash Dump Analyzer Reference Manual.
This
manual
tells you how to use the Crash Dump Analyzer to
determine the causes of system crashes.

INTRODUCTION TO THE MASTER INDEX

The Master Index is a large and comprehensive index to the entire
documentation set.
The indexes of the individual manuals have been
compiled into the Master Index without abridgement.
The Master Index will be valuable to new users who are not sure which
manual contains the information they need.
It will continue to be
valuable as an index to topics that are discussed (or might logically
be discussed) in more than one manual~

6.1

Format of the Master Index

Each page of the Master Index has two columns.
Look in the first
column for your topic. When you find it, look across to the second
column for the manual(s) and page number(s).
The titles of the manuals are shortened in the Master Index.
For
example, the long title RSX-llM/M-PLUS Batch and Queue Operations
Manual is shortened to "Batch and Queue." See Section 6.2 for a list
of the shortened titles.
Here is an example of the way a topic discussed in two or more manuals
appears in the Master Index:
, Despooler,
definition,
error message,

Batch and Queue, Gloss-3
System Management, A-2

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX
This entry indicates that you will find the definition for "despooler•
in the RSX-llM/M-PLUS Batch and Queue Operations Manual's Glossary on
page 3.
In the RSX-llM/M=PLUS SysteiilManaqement Guide, you can find a
discussion of the despooler error messages on page-2(;f Appendix A.
Most Master Index entries refer to a single manual only.

6.2

Manuals Included in the Master Index

Following is a list of all the manuals included in this index.
The
Index Title column gives the shortened titles that appear in the
Master Index, with the full manual titles listed in the Manual Title
column.
Index Title

Manual Title

Batch and Queue

RSX-llM/M-PLUS Batch and Queue
Operations Man~ ~-

Command Language

RSX-llM/M-PLUS Command Language
Manual

Crash Dump Analyzer

RSX-llM/M-PLUS Crash Dump Analyzer
Reference Manuar--

EDT Editor

EDT Editor Manual

Error Logging

RSX-llM/M-PLUS Error Logging Manual

Executive

RSX-llM/M-PLUS Executive
Reference Manual

Introduction

Introduction to RSX-llM
and RSX-llM-PLUS

I/O Drivers

RSX-llM/M-PLUS I/O Drivers
Reference Manuar-

I/O Operations

IAS/RSX-11 I/O Operations
Reference Manual

MCR Operations

RSX-llM/M-PLUS MCR Operations Manual

ODT

IAS/RSX-11 ODT Reference Manual

PDP-11 MACRO-ll

PDP-11 MACR0-11 Language
Reference Manual

Program Development

RSX-llM/M-PLUS Guide to Program
Development

Release Notes

RSX-llM/RMS-11/RSX-llS Release Notes

RMS-11 Introduction

RSX-llM/M-PLUS RMS-11:
An Introduction

RMS-11 User's Guide

RSX-llM/M-PLUS RMS-11
User's Guide

RMS-11 Utilities

RSX-llM/M-PLUS RMS-11
Utilities

RSX-llM/RSX-llS INFORMATION DIRECTORY AND MASTER INDEX

Index Title

Manual Title

RMS-11 Macros

RSX-llM/M-PLUS RMS-11 Macro
Programmer's Guide
---

System Generation (llM)

RSX-llM System Generation
and Installation Guide

System Generation (llS)

RSX-118 System Generation
and Installation Guide

System Library

IAS/RSX-11 System tibrary Routines
Reference Manual

System Management

RSX-llM/M-PLUS System Management
Guide

Task Builder

RSX-llM/M-PLUS Task Builder Manual

Utilities

RSX-llM/M-PLUS Utilities Manual

Writing I/O Driver

RSX-llM Guide to Writing
an I/O DrIVer-

MASTER INDEX

A
A error

macro definition
summary
A register
a symbol
A/D converter
ADOl-D
AFCll
device-specific QIO
FORTRAN interface
standard QIO
status return
AAll-K
AAVll-K

$AB
predefined syntax element in
MML
/AB switch
ZAP utility
/ABAUD keyword
SET command
VMR
Abbreviating
command
Abbreviation
DCL
Abbreviations of line editing
command
ABO command
ABODF$
Abort
task execution
TKB
during input
ABORT command

Basic MCR
command line format
error message
example
!OX

keyword
/PMD
ABORT option
Abort Task directive
Aborting
command
task
ABRT$
ABS symbolic argument
Absolute
address
location

PDP-11 MACR0-11 3-10, 3-13, 3-16,
5-10, 6-25 to 6-26, 6-28 to
6-29, 6-32 to 6-33, 6-38,
6-40, 6-42, 6-44, 6-47, 6-51,
6-56, 7-12 to 7-14, 7-19
PDP-11 MACR0-11 7-2
PDP-11 MACR0-11 D-1 to D-3
ODT 2-6, 5-3
ODT 2-1 to 2-2
I/O Drivers 14-1
I/O Drivers 14-1
I/O Drivers 14-1
I/O Drivers 14-2 to 14-3
I/O Drivers 14-3 to 14-7
I/O Drivers 14-2
I/O Drivers 14-8 to 14-9
I/O Drivers 22-2
I/O Drivers 22-2
System Management 12-45
Utilities 15-2
MCR Operations 3-171
System Management 10-46
Introduction 1-12, 2-4
Command Language 1-7 to 1-8, 9-1
EDT Editor 7-1
MCR Operations 3-3
Crash Dump Analyzer B-3
ODT 1-5
Task Builder 11-4
ODT 1-5
Introduction 1-21, 4-15
Command Language 7-16 to 7-21,
9-2
MCR Operations 3-3
System Generation (llS) 2-2
MCR Operations 3-3
MCR Operations 3-4
MCR Operations 3-4
System Management 4-23
MCR Operations 3-4
Task Builder 11-4
Executive 5-8
Introduction 1-21
Introduction 4-15
Executive 5-8
PDP-11 MACR0-11 6-19; 6-42
ODT 2-2
ODT 2-5, 4-4
Index-1

MASTER INDEX
Absolute address mode
assembled from relative
ABSOLUTE argument
Absolute binary output,
controlling
Absolute expression
Absolute loader
Absolute program section
See also .ASECT directive
Absolute region
See Region
ABSPAT option
/AC switch
Access
See also Access mode
See also Shared access
block
direct
modes
random
to indexed files
requested
See FAC field in FAB
sequential
to indexed files
shared
See also Access sharing
See also SHR field in FAB
stream
Access code
Access control
Access declaration
indexed files
read-only
read/write
relative files
sequential files
/ACCESS keyword
INI command
Access mode
See also Random access
See also Sequential access
and file organization
block
See also BKT field in RAB
sequential
VBN
FIND operation
indexed files
relative files
sequential files
GET operation
indexed files
relative files
sequential files
PUT operation
indexed files
relative files
sequential files
random

PDP-11 MACR0-11 5-7
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 8-8
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 3-17
System Generation (llS) 2-17
PDP-11 MACR0-11 6-42, 6-44 to
6-45

Task Builder 11-5
Task Builder 10-5
RMS-11 Introduction 1-1
RMS-11 User's Guide 1-7
RMS-11 Introduction 4-7
RMS-11 User's Guide 1-20, 3-6
RMS-11 Introduction 2-4
RMS-11 Introduction 3-11
RMS-11 Introduction 2-4
RMS-11 User's Guide 1-7, 1-9
RMS-11 User's Guide 5-7, 5-9
RMS-11 Introduction 2-4 to 2-5
RMS-11 User's Guide 1-7 to 1-8
RMS-11 User's Guide 5-16
RMS-11 Introduction 2-4, 4-3
RMS-11 Introduction 4-3
MCR Operations 2-3
RMS-11 User's Guide 1-9
RMS-11 User's Guide 2-6
RMS-11 User's Guide 7-1
RMS-11 User's Guide 2-6
RMS-11 User's Guide 2-6
RMS-11 User's Guide 4-6
RMS-11 User's Guide 3-6
MCR Operations 3-77
RMS-11 Introduction 3-1, 3-11
RMS-11 Introduction 3-13
RMS-11 Introduction 3-11 to 3-12,
3-14, 4-7
RMS-11 User's Guide 1-20, 3-6
RMS-11 Introduction 3-12
RMS-11 Introduction 3-12
RMS-11 User's Guide 7-3
RMS-11 User's Guide 4-8
RMS-11 User's Guide 3-7
RMS-11 User's Guide 7-5
RMS-11 User's Guide 4-10
RMS-11 User's Guide 3-9
RMS-11 User's Guide 7-6
RMS-11 User's Guide 4-11
RMS-11 User's Guide 3-10
Index-2

MASTER INDEX
Access mode
random {Cont.)
by key
by RFA
by VBN
to indexed files
to relative files
to sequential files
record

RMS-11 User's Guide 1-12
RMS-11 User's Guide 1-12
RMS-11 User's Guide 1-20
RMS-11 Introduction 3-15
RMS-11 Introduction 3-15
RMS-11 Introduction 3-14
RMS-11 Introduction 3-11, 3-13,
4-5
RMS-11 User's Guide 1-12

See also RAC field in RAB
FIND operations
GET operations
key
PUT operations
RFA
sequential

RMS-11 Introduction 4-6
RMS-11 Introduction 4-6
RMS-11 Introduction 3-12
RMS-11 Introduction 4-6
RMS-11 Introduction 3-11
RMS-11 Introduction 3-11

sequential
blocks
records
to indexed files
to relative files
to sequential files
switching
Access sharing
See also Shared access
read
write
Access stream
multiple
and shared access
indexed files
relative files
sequential files
Access-code
grouping program section by
Account
Account entry
adding to account file
contents
deleting
entering information in
examining
listing
modifying
Account file
adding entry to
copying
creating
extending
maximum number of entries
protection
sorting
Account File Maintenance Program
See ACNT
$ACHCK routine
$ACHKB routine
ACNT
account file
coovina
ext~nding
changing password
copying account file
ESCAPE key

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 1-20
User's Guide 1-12
Introduction 3-14
Introduction 3-14
Introduction 3-14
Introduction 3-13
Introduction 2-4, 4-3

RMS-11 Introduction 3-5 to 3-6
RMS-11 Introduction 3-6
RMS-11 User's Guide 1-15
RMS-11 User's Guide 2-17
RMS-11 User's Guide 2-9 to 2-10
RMS-11 User's Guide 7-10
RMS-11 User's Guide 4-15
RMS-11 User's Guide 3-15
Task Builder 2-4 to 2-5
Task Builder 10-36
Introduction 1-13, Gloss-1
System Management
System Management
System Management
System Management
System Management
System Management
System Management

2-3
2-1
2-7
2-3
2-4
2-6
2-5

System Management
System Management
System Management
System Management
System Management
System Management
System Management

2-3
2-2
2-2
2-2
2-2
2-2
2-8

Writing I/O Driver 5-2
Writing I/O Driver 5-2
Command Language 3-4, 4-2, 5-8,
5-72
MCR Operations 2-24
System Management
System Management
System Management
System Management
System Management

Index-3

2-2
2-2
2-2
2-2
2-3

MASTER INDEX
ACNT (Cont.)
example
invoking
option
Add
create
Delete
Examine
Exit
List
Modify
Sort
protection
restoring
ACP

MCR Operations 2-25
System Management 2-1
System Management 2-3
System Management 2-2
System Management 2-7
System Management 2-4
System Management 2-8
System Management 2-6
System Management 2-5
System Management 2-8

ANSI magtape
as extension of Executive
as task
attributes
default
definition
enabling and disabling capacity
example
for class of devices
foreign
passing parameter
I/O function mask
I/O request flow
processing
QIO interface
role of
in I/O processing
shareabil i ty
specifying
specifying APR
specifying task as
type
/ACP keyword
MOUNT command
Acronym
ACS command
command line format
error message
example
keyword
/BLKS
/ACT
ACT command
MCR
ACTFIL command
ACTFIL-option
Action routine
ACTION statement
ACTIVE command
command line format
example
keyword
/ALL
/TERM
Active job
definition
Active Page Register
See APR

System Management 2-2
Writing I/O Driver D-1
Command Language 5-26, 5-28 to
5-42, 6-67
System Generation {llM) 4-26
Writing 1/0 Driver D-5
Writing I/O Driver D-4
Writing 1/0 Driver D-4
MCR Operations 3-114
System Generation (llM) 1-4
Writing I/O Driver D-5
Writing I/O Driver D-11
Writing I/O Driver D-4
MCR Operations 3-123
Writing I/O Driver 4-12
Writing 1/0 Driver D-5
Writing I/O Driver D-6
I/O Drivers C-1
Writing I/O Driver 2-3
Writing I/O Driver D-5
MCR Operations 3-118
Task Builder 10-5
Task Builder 10-5
Writing I/O Driver D-2 to D-3
MCR Operations 3-118
Introduction Gloss-1
MCR Operations 3-8
MCR Operations 3-8
MCR Operations 3-9
MCR Operations 3-9
MCR Operations 3-8
Crash Dump Analyzer 2-1
MCR Operations 3-11
Command Language 3-2
I/O Operations 2-41
Task Builder 11-6
I/O Operations 7-6
Error Logging 5-30
MCR Operations 3-11
MCR Operations 3-11
MCR Operations 3-11
MCR Operations 3-11
MCR Operations 3-11
Batch and Queue Gloss-!

Index-4

MASTER INDEX
Introduction 1-20 to 1-21, 4-13,
5-7, Gloss-2, Gloss-33
Command Language 7-1! 7-55 to
7-57
Crash Dump Analyzer 3-23
Crash Dump Analyzer 3-22
Crash Dump Analyzer 3-21
Crash Dump Analyzer 3-26
Crash Dump Analyzer 3-24
Crash Dump Analyzer 3-24
Crash Dump Analyzer 3-23
Crash Dump Analyzer 3-22
Crash Dump Analyzer 3-21
Crash Dump Analyzer 3-21
Crash Dump Analyzer 3-21
Crash Dump Analyzer 3-21
Crash Dump Analyzer 3-21

Active task

AST queue
attribute bits
blocking bits
MCR
offspring control block
receive by reference queue
receive queue
state bits
Active task dump
AST queue
offspring control block
receive by reference queue
receive queue
Active Task List
See ATL
ACTIVE TASK LIST command
Activity report
!OX

MCR Operations 3-19

ADOl-D
ADll-K
ADD & PRINT command
EDI editor
ADD command
EDI editor
Add option
ACNT
Adding commands
DCL
Addition operator
Address
See also RFA
assigning
concepts
logical
mapped system
physical
mapped system
record
relocatable
space
virtual
virtual and logical
coincidence
space translation
transfer
virtual
mapped system
virtual and logical
relationship
virtual space
co-tree and main tree
disk-resident overlay
division
division by memory management
in overlay tree
memory-resident overlay
overlaid task
overlay
reducing usage of
virtual space allocation
diagram
creating ODL file

System Management 4-19 to 4-21,
4-41
I/O Drivers 14-1
I/O Drivers 22-2
Utilities 2-12, 2-28
Utilities 2-11, 2-27
System Management 2-3 to 2-4
System Management 12-9 to 12-11
PDP-11 MACR0-11 3-2, 3-5
Task Builder 2-1
Task Builder 2-13
Task Builder 2-14
Task Builder 2-18
Task Builder 2-13
Task Builder 2-17
RMS-11 User's Guide 1-9
Introduction 4-6, 4-9, Gloss-28
Task Builder 2-14
Task Builder 2-14
Task Builder 2-15
Task Builder 2-23
Task Builder A-5
Task Builder 2-13
Task Builder 2-17 to 2-18
Task Builder 2-17, 2-21
Task Builder 3-39
Task Builder 3-1 to 3-4
Task Builder 2-18
Task Builder 2-18
Task Builder 3-23
Task Builder 3-6
Task Builder 3-10, 3-14
Task Builder 'l-~._,I 'l_ 'l ') to
Task Builder 3-1
.J

Task Builder 3-35

Index-5

.J "'-

'l-'l11
.J-.:

MASTER INDEX
Address (Cont.)
virtual space and memory
overlaid task
Address boundary
See ZAP utility
Address checking
Address doubleword
Address expression
See Expression
Address mapping
Address mode
absolute
autodecrement
autodecrement deferred
auto increment
autoincrement deferred
immediate
index
index deferred
register
register deferred
relative
relative deferred
summary
Address space
logical
MSCP disks
relevant to RCT
physical
virtual
Address window
virtual
Addressing
PDP-11
/ADV
ADV command
ADVll-K
ADVANCE function
/AF job switch
QUE /MOD command
/AF switch
PRI command
AFCll
/AFTER job qualifier
SET QUEUE command
/AFTER qualifier
PRINT command
AID field in ALL block
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
/AL switch
$ALBLK (Allocate block)
$$ALER
reserved PSECT name
ALERR module

Task Builder 3-11 to 3-14
System Generation (llM) 4-25
Writing I/O Driver A-1
Executive 3-2
PDP-11 MACR0-11 5-1 to 5-10
PDP-11 MACR0-11 5-7
PDP-11 MACR0-11 5-5
PDP-11 MACR0-11 5-5
PDP-11 MACR0-11 5-3
PDP-11 MACR0-11 5-4
PDP-11 MACR0-11 5-6 to 5-7
PDP-11 MACR0-11 5-5
PDP-11 MACR0-11 5-6
PDP-11 MACR0-11 5-2
PDP-11 MACR0-11 5-3
PDP-11 MACR0-11 5-8
PDP-11 MACR0-11 5-9
PDP-11 MACR0-11 B-2
Executive 3-2 to 3-3
System Management 5-2
Executive 3-2
Executive 3-2 to 3-3
Executive 3-2
Introduction 5-3, Gloss-3
Executive 3-1
Crash Dump Analyzer 2-1
EDT Editor 2-43, 8-5
I/O Drivers 22-2
EDT Editor 2-8, 5-15
Batch and Queue 2-20
Batch and Queue 2-6
I/O Drivers 14-1
Batch and Queue 2-20
Batch and Queue 2-6
RMS-11 Macros 2-12
RMS-11 Macros 5-3
RMS-11 Macros 5-9, 5-16
RMS-11 Macros 5-30
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 5-46 to 5-47
RMS-11 Macros 6-2
RMS-11 Macros 5-73
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-3
Task Builder 10-6
System Library 8-9
Task Builder E-2
Task Builder 5-53
Index-6

MASTER INDEX
$ALF
predefined syntax element in
MML
$ALFN
predefined syntax element in
MML
Alignment
See also ALN field in ALL block
RMSDEF utility
$ALL
predefined syntax element in
MML
/ALL
ALL
range specification
ALL block
chaining to FAB
declaring
initializing
summary
ALL command
/ALL keyword
ACTIVE command
/ALLOC keyword
UFO command
ALLOCATE CHECKPOINT SPACE command
ALLOCATE command

command line format
error message
example
keyword
/TERM
/TYPE
/ALLOCATE switch
BAD utility
ALLOCATION
RMSDES utility
area section
file sect ion
Allocation
See also ALQ field in ALL block
See also ALQ field in FAB
generic
indexed files
DEQ
initial
relative files
DEQ
initial
RMS DEF utility
data
file
RMSDES utility
areas
RMSDSP utility
displaying
sequential files
DEQ
initial
XAB
See also ALL block
Allocation failure
pool
Allocation-code

System Management 12-40
System Management 12-40
RMS-11 Utilities A-14
System Management 12-43
Crash Dump Analyzer 2-1
EDT Editor 6-11
RMS-11 Introduction 4-8
RMS-11 Macros 2-12
RMS-11 Macros 2-8
RMS-11 Macros 2-9
RMS-11 Macros 6-2
MCR Operations 3-12
MCR Operations 3-11
MCR Operations 3-219
MCR Operations 3-8
Introduction 3-12
Command Language 5-4, 5-9, 5-22
to 5-24, 9-2
MCR Operations 3-12
MCR Operations 3-12
MCR Operations 3-13
MCR Operations 3-13
MCR Operations 3-12
MCR Operations 3-12
Utilities 6-5
RMS-11 Utilities 2-44
RMS-11 Utilities 2-31
RMS-11 user's Guide 1-19
MCR Operations 3-12
RMS-11 User's Guide 6-22
RMS-11 User's Guide 6-26
RMS-11 User's Guide 6-22
RMS-11 User's Guide 4-3
RMS-11 User's Guide 4-4
RMS-11 user's Guide 4-3
RMS-11 Utilities A-16
RMS-11 Utilities A-14
RMS-11 Utilities 2-10, 2-25
RMS-11 Utilities 5-4
RMS-11 User's Guide 3-4
RMS-11 User's Guide 3-4
RMS-11 User's Guide 3-4

System Management 13-2
Task Builder 2-4 to 2-5

Index-7

MASTER INDEX
ALN field in ALL block
CREATE operation
DISPLAY operation
EXTEND operation
off set
OPEN operation
RSTS/E
summary
$ALOCB routine
<ALPHAN> symbol
ALQ field in ALL block
CREATE operation
DISPLAY operation
EXTEND operation
offset
OPEN operation
RSTS/E
summary
ALQ field in FAB
CREATE operation
EXTEND operation
off set
OPEN operation
summary
ALQO field in ALL block
9f f set
ALQl field in ALL block
offset
ALSCT FORTRAN subroutine
$ALSVB (Allocate small virtual
block)
ALT command
ALT MODE key
ALTER command
command line format
example
keyword
/PRI
/RPR!
VMR
Alter Priority directive
Altering
contents of location
Alternate CLI
Alternate CLI support
UCB field
Alternate index
See also Index
RMSIFL utility
Alternate key
RMSDEF utility
defining
RMSIFL utility
allocating file space
sorting
Alternate key files (RMSIFL)
device allocation
<ALTMOD> symbol
ALTP$
ALUN$

RMS-11 Macros 5-17
RMS-11 Macros 5-30
RMS-11 Macros 5-47
RMS-11 Macros 6-2
RMS-11 Macros 5-79
RMS-11 Macros D-4
RMS-11 Macros 6-4
Writing I/O Driver 5-3
MCR Operations 4-8
RMS-11 Macros 5-16, 5-21
RMS-11 Macros 5-30
RMS-11 Macros 5-47
RMS-11 Macros 6-2
RMS-11 Macros 5-79
RMS-11 Macros D-4
RMS-11 Macros 6-5
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-16, 5-21
5-46 to 5-47
6-22
5-78
6-25

RMS-11 Macros 6-2
RMS-11 Macros 6-2
Task Builder 5-56 to 5-58
System Library 8-18
MCR Operations 3-15
Command Language 3-12
MCR Operations 3-15
MCR Operations 3-15
MCR Operations 3-15
MCR Operations 3-15
MCR Operations 3-15
System Management 10-8
Executive 5-10
ODT 4-1
System Management 12=2
Writing I/O Driver 4-25
RMS-11 Utilities 3-11 to 3-12
RMS-11 Introduction 3-7
RMS-11 User's Guide 1-7, 1-11
RMS-11 Utilities A-11
RMS-11 Utilities 3-13
RMS-11 Utilities 3-11
RMS-11 Utilities 3-7
MCR Operations 4-8
Executive 5-10
Executive 5-12

$$ALVC

reserved PSECT name
$$ALVD
reserved PSECT name

Task Builder E-2
Task Builder E-2

$$ALVI

reserved PSECT name

Task Builder E-2
Index-8

MASTER INDEX
$ALVRT (Allocate virtual
memory)
AMll-K
AMA symbolic argument
American National Standards
Institute
See ANSI
Analog-to-digital converter
See A/D converter
Analysis routines switch
Ancillary Control Processor
See ACP
AND
range specification
AND macro
MML
Angle bracket
ANSI
file specification
quotation marks in
ANSI file name
DCL
ANSI file name block format
ANSI magtape

creating volume
end-of-tape
end-of-volume label
file header block
file header format
file header labels
file name conversion
file structure
file trailer labels
FNB offset definitions
opening file by file ID
override block size
rewinding file
RMSBCK ut il it y
RMSDSP utility
set default block size
user file labels
user volume labels
volume label format
ANSI magtape file name
conversion to RADIX-50
dataset descriptor
.FIND operation on
.PARSE
restriction on NMBLK$
ANSLIB.OLB
linking tasks to
rebuilding user-written tasks
ANSLIB.OLB (ANSI Magnetic Tape
1 ibrary)
AOP field in ALL block
CREATE operation
DISPLAY operation
EXTEND operation
off set

System Library 8-16
I/O Drivers 22-2
PDP-11 MACR0-11 6-19

Crash Dump Analyzer 2-3

EDT Editor 6-11
System Management 12-25 to 12-26
Command Language 3-15
MCR Operations 1-2
Command Language 1-10
I/O Operations B-5
I/O Operations 5-4, G-1, G-10
Command Language 5-12
RMS-11 Macros 3-2, 5-20, 5-37,
5-43, 5-77, 5-88, 5-104,
5-111, 5-118
I/O Operations G-11
I/O Operations G-9
I/O Operations G-7
I/O Operations G-9
I/O Operations G-5 to G-6
I/O Operations G-3 to G-4
I/O Operations G-6
I/O Operations G-8
I/O Operations G-7
I/O Operations B-4
I/O Operations 3-14
I/O Operations 2-18
I/O Operations 4-18
RMS-11 Utilities 6-1, 6-8
RMS-11 Utilities 5-3
I/O Operations G-10
I/O Operations G-8
I/O Operations G-3
I/O Operations G-1 to G-4
I/O Operations 6-13
I/O Operations 4-15
I/O Operations 2-29
I/O Operations 4-15
I/O Operations 4-8
I/O Operations 2-33
System Generation (llM) 4-56
System Generation (llM) 7-4
System Generation (llM) 6-7
Program Development 1-11
RMS-11 Macros 5-17 to 5-18
RMS-11 Macros 5-30
RMS-11 Macros 5-47
RMS-11 Macros 6-2

Index-9

MASTER INDEX
AOP field in ALL block (Cont.)
OPEN operation
RSTS/E
summary
XB$CTG mask
XB$HRD mask
AP command
EDI editor

RMS-11 Macros 5-79
RMS-11 Macros D-4
RMS-11 Macros 6-6
RMS-11 Macros 6-7

/AP switch
PIP utility
RMSCNV utility
Apostrophe (') operator
APPEND command
APPEND function
/APPEND qualifier
BRU utility
/APPEND switch
DSC utility
Append switch
Delete subswitch
Application
See also Designing applications
optimization
Application task
Applications Processor
definition
See also QMG
special applications
APR
and memory-resident overlays
relocatable region
specifying for
resident common
system-owned
resident library
system-owned
specifying for ACP
supervisor mode
ARll

Program Development 2-17
Utilities 2-12, 2-28
Error Logging 2-3, 2-8
Utilities 3-14
RMS-11 Utilities 4-5, 4-7, 4-13,
4-15
ODT 2-7, 4-6
EDT Editor 8-5
Command Language 4-61 to 4-63,
9-2
EDT Editor 5-38 to 5-40
Utiiities 7-12
Utilities 8-9
Error Logging 2-3, 2-8
Error Logging 2-3, 2-8
RMS-11 User's Guide 1-13
RMS-11 User's Guide 2-11
Introduction 5-2, Gloss-3
Batch and Queue Gloss-1
Task Builder 2-16
RMS-11 User's Guide 8-3
RMS-11 User's Guide 8-6
Task Builder 5-6
Task Builder 11-11
Task Builder 11-11
Task Builder 10-5
RMS-11 User's Guide 8-7
!/O Drivers 16-1 to 16-2

Architecture
control file module
Error Logging 4-1
Error Logging 4-1
error log control file
RMS-11 User's Guide 6-10, 8-13
Area
See also ALL block
alignment
See ALN field in ALL block
allocation
See ALQ field in ALL block
bucket size
See BKZ field in ALL block
contiguity
RMS-11 User's Guide 6-13
See also XB$CTG mask in AOP field
count
See NOA field in SUM block
default extension size
See DEQ field in ALL block
RMS-11 User's Guide 5-2
definition
description, obtaining
See DISPLAY ooeration
extending alloc~tion
See EXTEND operation
identifier
Index-10

MASTER INDEX
Area
identifier (Cont.)
See AID field in ALL block
location
See LOC field in ALL block
multiarea indexed files
RMSDEF utility
defining
RMSDES utility
defining
and BUCKET SIZE attribute
and DATA AREA attribute
and INDEX AREA attribute
and LEVELl INDEX AREA
and SIZE attribute
by default
explicitly
defining by default
CREATE command
SET ALL command
defining explicitly
numbering
single-area indexed files
Area information (RMSDSP)
displaying
Area number (RMSDEF}
Argument
macro call
macro definition
dummy
passing in macro definition
register
separator
Arithmetic element
extended
specifying
Arithmetic operator
See Operator
Array declaration
mapped
Arrow key
See Cursor-control key
/AS switch
DMP utility
ASC command
ASCII
displaying
operator
ASCII character
ASCII character set
ASCII conversion
See ASCII number conversion
ASCII conversion characters
.ASCII directive
ASCII number conversion
ASCII to Radix-50 ($CATS)
ASCII with blanks to Radix-50
($CAT5B)
decimal to binary ($CDTB)
decimal to binary double-word
( .DD2CT)
octal to binary ($COTB)
octal to binary double-word
(.OD2CT)
ASCII stream file
RMSCNV utility

RMS-11 User's Guide 6-12
RMS-11 Utilities A-13
RMS-11 Utilities 2-10, 2-25
RMS-11 Utilities 2-1, 2-42
RMS-11 Utilities 2-32
RMS-11 Utilities 2-40
RMS-11 Utilities 2-41
RMS-11 Utilities 2-41
RMS-11 Utilities 2-36
RMS-11 Utilities 2-43
RMS-11 Utilities 2-43
RMS-11 Utilities 2-17, 2-38
RMS-11 Utilities 2-8, 2-28
RMS-11 Utilities 2-14
RMS-11 Utilities 2-17
RMS-11 Utilities 2-8, 2-28, 2-43
RMS-11 User;s Guide 6-11
RMS-11 Utilities 5-4
RMS-11 Utilities A-16
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
ODT 2-6, 5-3
ODT 2-5

7-4 to 7-5
7-4 to 7-6
7-2
7-7

Task Builder 10-16

Task Builder A-10
EDT Editor 2-10, 5-13
Utilities 11-3EDT Editor 8-5
Introduction 4-4, 4-6, 4-8,
Gloss-3
ODT 4-6
ODT 2-7
EDT Editor 5-20, 8-5, B-1
PDP-11 MACR0-11 A-1 to A-3
PDP-11 MACR0-11 6-25 to 6-26
PDP-11 MACR0-11 6-26 to 6-28
System Library 4-6
System Library 4-8
System Library 4-4
System Library 4-1
System Library 4-5
System Library 4-2
RMS-11 Utilities 4-3, 4-8
Index-11

MASTER INDEX
ASCII stream file (Cont.)
RMSIFL utility
RMS-11 Utilities 3-1
.ASCIZ directive
PDP-11 MACR0-11 6-28
I/O Operations 4-7
.ASCPP
.ASECT directive
PDP-11 MACR0-11 3-11, 6-46
ASG directive
task builder
I/O Operations 6-13
ASG option
Task Builder 11-7
.ASK directive
MCR Operations 4-23
example
MCR Operations 4-24
MCR Operations 4-23
format
MCR Operations 4-24
.ASKN directive
example
MCR Operations 4-26
format
MCR Operations 4-24
.ASKS directive
MCR Operations 4-26
example
MCR Operations 4-27
format
MCR Operations 4-27
.ASL UN
I/O Operations 4-12
ASN command
MCR Operations 3-16
System Management 10-9
VMR
I/O Drivers 2-3, 3-2
ASR-33
I/O Drivers 2-3, 3-2
ASR-35
Assemble
Command Language 6-1
Assembler
See also MACR0-11 Assembly Language
address mode summary
PDP-11 MACR0-11 B-2
character set
PDP-11 MACR0-11 3-1 to 3-3
coding standard
PDP-11 MACR0-11 E-1 to E-16
directive summary
PDP-11 MACR0-11 B-3 to B-8
directive, general
PDP-11 MACR0-11 6-1 to 6-3
summary table
PDP-11 MACR0-11 6-1 to 6-3
error
See A error
error code summary
PDP-11 MACR0-11 D-1 to D-5
error message
PDP-11 MACR0-11 8-19 to 8-21
file specification
PDP-11 MACR0-11 8-3 to 8-5
switch
PDP-11 MACR0-11 8-6
listing symbols
PDP-11 MACR0-11 4-1
Command Language 6-2 to 6-11
MACR0-11
obsolete functions
PDP-11 MACR0-11 I-1
operating hints
PDP-11 MACR0-11 F-1
operating procedures
PDP-11 MACR0-11 8-1
pass 1
PDP-11 MACR0-11 1-1 to 1-2
pass 2
PDP-11 MACR0-11 1-2
position independent code
PDP-11 MACR0-11 G-1
special character summary
PDP-11 MACR0-11 B-1
statement format
PDP-11 MACR0-11 2-1
version number
PDP-11 MACR0-11 6-4
work file
PDP-11 MACR0-11 F-1
Assembly
RMS-11 Macros 2-20
language
Program Development 1-4 to 1-5
See also MACR0-11
listing
examining at a terminal
Program Development 3-6
formatting
Program Development 2-6
generating
Program Development 3-4 to 3-6
page break
Program Development 2-6
printing
Program Development 3-8 to 3-9
spooling
Program Development 3-8 to 3-9
table of contents
Program Development 2-6
terminal format
Program Development 2-6

Index-12

MASTER INDEX
ASSIGN command

Command Language 4-77 to 4-78,
5-7 to 5-8, 5-13 to 5-15,
5-72 to 5-73, 9-3
MCR Operations 3-16

command line format
nonpr iv i l eg ed
privileged
error message
example
keyword
/GBL
/LOGIN
/TERM
VMR
command iine format
example
keyword
/GBL
Assign Logical Unit Number
Assign LUN
Assign LUN directive
Assign table dump
ASSIGN/LOGIN command
ASSIGN/QUEUE command
DCL
ASSIGN/REDIRECT command

MCR Operations 3-17
MCR Operations 3-17
MCR Operations 3-18
MCR Operations 3-18
MCR Operations 3-17
MCR Operations 3-17
MCR Operations 3-17
System Management 10-9
System Management 10-9
System Management 10-10
System Management 10-9
I/O Operations 4-12
Executive 5-12
Crash Dump Analyzer 3-1, 3-17
Command Language 5-8
Command Language 9-3
System Management 7-8, 7-12, 7-22
Command Language 5-16 to 5-18,
9-3
Command Language 5-7, 5-18 to
5-19, 9-4

ASSIGN/TASK command
Assignment
global
local
logical device
logical unit number
changing

MCR Operations 2-12
MCR Operations 2-12
System Management 10-9
MCR Operations 3-143
System Management 10-32
MCR Operations 3-113
System Management 10-29

displaying
logical-device
deleting
displaying
global
local
login
specifying
login
Assignment operator
See Direct assignment operator
Assignment statement
See Direct assignment statement
AST
block I/O completion
command arrival
definition
exit
floating point processor
exception
general characteristics
power recovery
purpose
receive data
receive-by-reference
service routine
task's stack format
terminating service
trap-dependent parameters

MCR Operations 3-16
MCR Operations 3-16
MCR Operations 3-16
MCR Operations 3-16
MCR Operations 3-16
MCR Operations 3-16
MCR Operations 2-12

System Generation (llM) 4-28
I/O Operations 2-44
Executive 5-145
Executive 2-4
Executive 5-184
Executive 5-160
Executive 2-7
Executive 5-170
Executive 2-6
Executive 5-182
Executive 5-191
Executive 2-7
I/O Drivers 1-11, 1-13
Executive 2-8 to 2-11
I/O Drivers 1-24
Executive 2-8

Index-13

MASTER INDEX
AST (Cont.)
unsolicited-input-character
AST recognition
AST routine
FORTRAN callable
AST Service Exit directive
AST service routine
restrictions
specifying address
Asterisk (*)
See also Autoload indicator
See also Wildcard
cross-reference
of overlaid task
cross-reference listing
EDI editor
PIP
wildcard
Asterisk prompt
ASTX$S
$ASUMR routine
ASYN argument to RAB$B macro
RSTS/E
Asynchconous operation

I/O Drivers 3-32 to 3-33
Executive 5-53 to 5-54
Executive 1-8
Executive 5-14
I/O Operations 2-45
I/O Operations 2-44
ODT 2-5
Command Language 3-16, 4-6 to 4-8

Task Builder 4-13
Task Builder 10-12
Program Development 2-10
Program Development 3-10
MCR Operations 2-6
EDT Editor 2-20, 7-1
Executive 5-14
I/O Drivers 1-24
Writing I/O Driver 5-4, B-3
RMS-11 Macros 2-8
RMS-11 Macros D-4
RMS-11 Introduction 4-4
RMS-11 User's Guide 8-2, 8-4, 8-7
to 8-8

See also RB$ASY mask in ROP field
I/O techniques
RMS-11 User's Guide 2-17
indexed files
RMS-11 User's Guide 7-8
RAB declaration
RMS-11 Macros 2-8
relative files
RMS-11 User's Guide 4-14
sequential files
RMS-11 User's Guide 3-14
waiting for
See WAIT operation
Asynchronous serial line
interface
I/O Drivers 2-40, 3-30
DLll
I/O Drivers 12-2
DLll-E
Asynchronous serial line
multiplexer
I/O Drivers 2-40, 3-29
DHll
DHVll
!/O Drivers 2-40
I/O Drivers 2-40, 3-30
DJll
I/O Drivers 2-40, 3-30
DZll
Asynchronous System Trap
See AST
Asynchronous transfer
I/O Operations 3-37
Command Language 3-16
At sign {@)
MCR Operations 4-1
cross-reference
of overlaid task
Task Builder 4-13
cross-reference listing
Task Builder 10-12 to 10-13
indirect file
Task Builder 1-5
CDT
Program Development 5-8
At sign (@) command
ODT 2-5, 4-4
AT.
Command Language 1-17
/ATL
Crash Dump Analyzer 2-1
ATL
Command Language 7-46 to 7-50,
7-55 to 7-57

Index-14

MASTER INDEX
ATL command
Basic MCR
command line format
example
ATRG$
Attach mode
Attach Region directive
Attached terminal
Attachment descriptor
Attribute

block spanning
bucket size
contiguity
DCL syntax element
file allocation
file organization
file specification
in .NAME djrective
DSK
GBL
NODSK
NOGBL
keys
medium
MRN
placement control
program section
restriction
protection
record format
record size
record-output handling
RMS DES utility
ALLOCATION (area section)
ALLOCATION (file section)
BLOCK SPAN
BUCKET SIZE (area section)
BUCKET-SIZE (file section)
CARRIAGE CONTROL
CHANGES
clearing
individual values
sections
CLUSTER SIZE
CONTIGUOUS (area section)
CONTIGUOUS (file section)
CONTROL FIELD SIZE
DATA AREA
DATA-FILL
displaying
individual values
sections
DUPLICATES
EXACT POSITIONING
EXTENSION (area section)
EXTENSION (file section)
FILE PLACEMENT (system
section)
FORMAT
INDEX AREA
INDEX-FILL
informational
LEVELl INDEX AREA
MAGTAPE BLOCK SIZE

MCR Operations 3-19
System Generation (llS) 2-3
MCR Operations 3-21
MCR Operations 3-21
Executive 5-16
MCR Operations 4-32
Executive 5-16
Command Language 3-2
Executive 3-8
RMS-11 Introduction 3-15, 4-3,
5-1
RMS-11 User's Guide 1-2, 1-18
RMS-11 Utilities 2-1
RMS-11 user's Guide 1-19
RMS-11 Useres Guide 1-19
RMS-11 user's Guide 1-19
System Management 12-25
RMS-11 user's Guide 1-19
RMS-11 User's Guide 1-18
RMS-11 User's Guide 1-18
Task Builder 3-27
Task Builder 3-27
Task Builder 3-27
Task Builder 3-27
RMS-11 User's Guide 1-19
RMS-11 User's Guide 1-18
RMS-11 User's Guide 1-19
RMS-11 User's Guide 1-19
Task Builder 2-3
RMS-11 User's Guide 1-18
RMS-11 user's Guide 1-18
RMS-11 User's Guide 1-18
RMS-11 user's Guide 1-19
RMS-11 Utilities 2-29
RMS-11 Utilities 2-44
RMS-11 Utilities 2-31
RMS-11 Utilities 2-37
RMS-11 Utilities 2-43, 2-45
RMS-11 Utilities 2-32
RMS-11 Utilities 2-37
RMS-11 Utilities 2-40
RMS-11 Utilities 2-6, 2-22, 2-25
RMS-11 Utilities 2-26
RMS-11 Utilities 2-26
RMS-11 Utilities 2-31
RMS-11 Utilities 2-46
RMS-11 Utilities 2-35
RMS-11 Utilities 2-37
RMS-11 Utilities 2-40
RMS-11 Utilities 2-40
RMS-11 Utilities 2-15, 2-26
RMS-11 Utilities 2-26
RMS-11 Utilities 2-27
RMS-11 Utilities 2-40, 2-42, 2-44
RMS-11 Utilities 2-47
RMS-11 Utilities 2-45
RMS-11 Utilities 2-32
RMS-11 Utilities 2-30
RMS-11 Utilities 2-36
RMS-11 Utilities 2-41
RMS-11 Utilities 2-41
RMS-11 Utilities 2-1, 2-17, 2-29
RMS-11 Utilities 2-41
RMS-11 Utilities 2-34
Index-15

MASTER INDEX
Attribute
RMSDES utility (Cont.)
MAX RECORD NUMBER
NAME (file-section)
NAME (key section)
NULL KEY
NULL-VALUE
ORGANIZATION
OWNER
POSITION
PROTECTION
resetting
REWIND MAGTAPE
RMS-11SEGO POSITION
SEGn-LENGTH
SEGn-POSITION
settTng
from a data file
from a description file
individual values
setting sections
SIZE
SOURCE
SUPERSEDE
TARGET
TYPE
RMSDSP utility
save
/AU switch
SLP utility
Audit trail
See SLP utility
$$AUTO
PSECT
reserved PSECT name
AUTO module
Autobaud detection option
Autobaud speed detection
Autoconf ig ure
adding devices
description
device support
failure
overriding results
exception
question
restrictions
sample output
supported hardware
use
with saved answer files
Autodecrement address mode
Autodecrement deferred address
mode
Autodecrement indicator
Autoincrement address mode
Autoincrement deferred address
mode
Autoincrement indicator
AUTOL module
Autoload
applying indicator
co-tree root
.FCTR label name
file name

RMS-11 Utilities 2-34
RMS-11 Utilities 2-31
RMS-11 Utilities 2-38
RMS-11 Utilities 2-39
RMS-11 Utilities 2-39
RMS-11 Utilities 2-31
RMS-11 Utilities 2-34
RMS-11 Utilities 2-46
RMS-11 Utilities 2-33
RMS-11 Utilities 2-21
RMS-11 Utilities 2-34
RMS-11 Utilities 2-1, 2-17, 2-29
RMS-11 Utilities 2-42
RMS-11 Utilities 2-42
RMS-11 Utilities 2-42
RMS-11 Utilities 2-13
RMS-11 Utilities 2-25
RMS-11 Utilities 2-24
RMS-11 Utilities 2-21
RMS-11 Utilities 2-21
RMS-11 Utilities 2-36
RMS-11 Utilities 2-30
RMS-11 Utilities 2-35
RMS-11 Utilities 2-30
RMS-11 Utilitie~ 2-38
RMS-11 Utilities 5-1
Task Builder 2-4
Utilities 13-15

Task Builder 5-52 to 5-53
Task Builder E-2
Task Builder 5-52
MCR Operations 3-171
System Management 10-46
I/O Drivers 2-42
System Generation (UM) 1-2
System Generation (llM) 4-4
System Generation (UM) 3-16
Syste• Generation (llM) E-1
System Generation (UM) 3-17
System Generation (llM) 3-18, 4-3
System Generation (UM) 3-19
System Generation (llM) 4-3
System Generation (UM) 3-16
System Generation (llM) 3-17
System Generation (llM) 3-19
System Generation (llM) 3-16
System Generation (llM) 3-17
PDP-11 MACR0-11 5-5
PDP-11 MACR0-11 5-5
PDP-11 MACR0-11 3-2
PDP-11 MACR0-11 5-3
PDP-11 MACR0-11 5-4
PDP-11 MACR0-11 3-2
Task Builder 5-52
Task Builder 4-1
Task Builder 4-2
Task Builder 4-3
Task Builder 4-2
Index-16

MASTER INDEX
Autoload
applying indicator (Cont.)
portions of ODL tree
program section name
segment name
code sequence
conventional task
error handling
indicator
efficiently placed
overhead in region
path loading
specifying
vector
eliminating unnecessary
overlay
vector format
conventional task
I- and D-space
Autoloadable
data segment
making file
using file name
making program section
Automatic carriage return
Automatic file truncation
disabling
enabling
AUTOMCALL argument
AVERAGE.FTN source code

Task Builder 4-2
Task Builder 4-3
Task Builder 4-3
Task Builder 4-5
Task Builder 4-11 to 4-12
Task Builder 4-2
Task Builder 4-6
Task Builder 5-13
Task Builder 4-3 to 4-4
Task Builder 4-1
Task Builder 4-4
Task Builder 4-6
Task Builder 3-20
Task Builder 4-4
Task Builder 4-4 to 4-5
Task Builder 4-7
Task Builder 4-2
Task Builder 4-3
I/O Drivers 2-34, 3-27 to 3-28
I/O Operations 4-22
I/O Operations 4-22
I/O Operations 4-22
PDP-11 MACR0-11 8-9
Program Development 7-3

B
B command
ODT
B condition test argument
B error
summary
"'B operator
B register
$BA
predefined syntax element in
MML
/BA switch
DMP utility
BACK command
BACK SPACE function
BACK SPACE key
Back-up date
RMSRST utility
Backing up files
Backing up volume
See BRU utility
See DSC utility
Backslash (\)
ODT
Backslash operator {\)
Backup and Restore Utility
See BRU utility
BACKUP command
BACKUP function
Backup switch

ODT 2-8, 3-1 to 3-2
Program Development 5-6
PDP-11 MACR0-11 6-52
PDP-11 MACR0-11 6-37
PDP-11 MACR0-11 D-3
PDP-11 MACR0-11 3-5, 6-32
ODT 2-6, 5-4
System Management 12-45
Error Logging 2-3, 2-9
Utilities 11-3
EDT Editor 2-43, 8-6
EDT Editor 5-19
Introduction 1-8 to 1-10, Gloss-4
Command Language 3-13
RMS-11 Utilities 7-8, 7-10
RMS-11 User's Guide 1-10, 1-12

Program Development 5-5
ODT 2-7, 4-2 to 4-3
Command Language 5-11, 5-60 to
5-71, 9-4 to 9-5
EDT Editor 5-15
Error Logging 2-3, 2-9

Index-17

MASTER INDEX
/BACKUP SET qualifier
BRU utility
Backwards deletion option
Bad block
detection
RCT
handling on MSCP disks
RCT
information
DSC utility
listing
!OX

locating
BAD utility
FMT utility
VFY utility
notification
RCT
processing
BAD utility
BRU utility
recovery
RCT
removing from testing
!OX

replacement
RCT
replacement completion
RCT
revector ing
RCT
specifying
!OX

steps to replace
RCT
Bad Block File Header
Bad Block Locator Utility
See BAD utility
Bad Block Replacement Control
Task
See RCT
/BAD keyword
IN! command
/BAD qualifier
BRU utility
options
/BAD switch
DSC utility
FMT utility
BAD utility
bad block descriptor entry
bad block processing
command line
device support
device verifying
error message
indirect command file
INI command
programming consideration
switch
stand-alone
summary
task
BADBLK.SYS file

Utilities 7-13
MCR Operations 3-174
System Management 10-48
System Management 5-3
System Management 5-3
Utilities 8-9
System Management 4-25
Utilities 6-1
Utilities 5-1
Utilities 9-7
System Management 5-3
Utilities 6-3
Utilities 7-24
System Management 5-1
System Management 4-24
System Management 5-1, 5-3
System Management 5-4
System Management 5-4
System Management 4-24
System Management 5-3
I/O Operations E-2

MCR Operations 3-77
Utilities 7-13, 7-24
Utilities 7-25
Utilities 8-9
Utilities 5-7
Command Language 5-10 to 5-12,
5-64 to 5-65
Utilities 6-4
Utilities 6-3
Utilities 6-1
Utilities 6-9
Utilities 6-3
Utilities 6-10
Utilities 6-2
Utilities 6-4
Utilities 6-5
Utilities 6-5
Utilities 6-8
Utilities 6-1
Utilities 6-5
Command Language 5-11, 5-65
Index-18

MASTER INDEX
BADBLOCKS
display command
IOX command
parameter command
Badge reader
BADSYS
deleted from kits
Base number
in DCL
Base-10
Base-8
Baseline system
definition
BASIC
BASIC command
Basic MCR
ABORT command
ATL command
BRK command
building
CANCEL command
command
initialization
system maintenance
task control
error message
initiating
OPEN command
REDIRECT command
RESUME command
RUN command
size
TAL command
TIME command
BASIC-11/IAS-RSX
BASIC-PLUS-2/IAS-RSX
<BASLIN> symbol
Batch processing
Batch processor prototype task
Baud rate
autobaud detection option
remote terminal
specifying
specifying
BC macro
MML
BCT macro
MML
/BD switch
RMSRST utility
BOB pool
BEFORE
range specification
BEGIN
ranqe specification
BEGIN-command
EDI editor
EDI editor

System Management 4-25
System Management 4-24
System Management 4-24
I/O Drivers 2-4A, 3-3
Release Notes 1-23
Introduction 3-2
Command Language 1-8
Introduction 3-2
Introduction 3-2
System Generation (llM) 1-5
Introduction 4-12
Introduction 4-13
Command Language 6-2, 6-11 to
6-13, 9-5
System Generation (llS) 1-1, 2-1
System Generation (llS) 2-2
System Generation (llS) 2-3
System Generation {llS) 2-3
System Generation (llS) 4-6
System Generation (llS) 2-2
System Generation (llS) 2-2
System Generation (llS) 2-3
System Generation {llS) 2-2
System Generation (llS) 2-4
System Generation (llS) 2-1
System Generation (llS) 2-3
System Generation (llS) 2-2
System Generation (llS) 2-2
System Generation (llS) 2-2
System Generation (llS) 1-3
System Generation (llS) 2-4
System Generation (llS) 2-2
Command Language 6-11 to 6-13,
9-5
Command Language 6-11 to 6-13,
9-5
MCR Operations 4-8
Executive 4-1
System Management 7-1, 7-9 to
7-10
System Management 7-1
EDT Editor C-1
MCR Operations 3-171
MCR Operations 3-193
System Management 10-57
MCR Operations 3-198
System Management 10-59
System Management 12-26
System Management 12-27 to 12-28
RMS-11 Utilities 7-8, 7-10
RMS-11 Macros 2-8
EDT Editor 6-10
EDT Editor 6-8
Program Development 2-14
Utilities 2-28
Index-19

MASTER INDEX
.BEGIN directive
format
Begin-End block
beginning
creating
ending
BEGIN-END statement
BEX symbolic argument
/BF switch
SLP utility
Bias value
Trace program
BID field in FAB
offset
summary
FB$BID code
BID field in RAB
offset
summary
RB$BID code
Big buffer
choosing size for
using
Big buffering
Big disk tape kit
copying
on-line
stand-alone
Big-buffering support
BIN symbolic argument
BINARY argument
Binary conversion
binary byte to octal ($CBTMG)
binary date to decimal ($CDBAT)
binary to signed decimal
($CBDSG)
binary to signed octal ($CBOSG)
binary to unsigned decimal
($CBDMG)
binary to unsigned octal
($CBOMG)
double-precision binary to
decimal ($CDDMG)
qeneral purpose binarv to ASCII
($CBTA)Binary key
See also XB$BN2 mask in DTP field
See also XB$BN4 mask in DTP field
2-byte unsigned
4-byte unsigned
Binary machine code
Binary operator
See also Operator, logical
evaluation of multiple
precedence with unary
Binary output
controlling absolute
enabling and disabling
Binary output file size switch
Bit
8-bit character option
BITMAP.SYS file
BKS field in FAB
CREATE operation
off set

MCR Operations 4-28
MCR Operations 4-28
MCR Operations 4-3
MCR Operations 4-28
MCR Operations 4-3
MCR Operations 4-35
Error Logging 5-36
PDP-11 MACR0-11 6-11
Utilities 13-15
ODT 2-3, 5-6
ODT 8-2
RMS-11 Macros 6-22
RMS-11 Macros 6-26
RMS-11 Macros 6-115
RMS-11

Macros 6-116

I/O Operations 1-8
I/O Operations 1-8
I/O Operations 1-7, 3-21, 3-27
System Generation {11M) 2-32
System Generation (llM) 2-6
System Generation (llM) 4-56
PDP-11 MACR0-11 6-11
PDP-11 MACR0-11 8-9, 8-11
System Library 5-9
System Library 5-2
System Library 5-4
System Library 5-8
System Library 5-3
System Library 5-7
System Library 5-5
System Library 5-10

RMS-11 User's Guide 6-5
RMS-11 User's Guide 6-5
Introduction 4-5 to 4-6, 4-12,
Gloss-4
PDP-11 MACR0-11 3-5 to 3-6
PDP-11 MACR0-11 3-6
PDP-11 MACR0-11 3-16
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 6-20
Crash Dump Analyzer 2-8
RMS-11 Introduction 2-1
MCR Operations 3-176
Command Language 5-11, 5-65
RMS-11 Macros 5-17
RMS-11 Macros 6-24

Index-20

MASTER INDEX
BKS field in FAB (Cont.)
OPEN operation
RSTS/E
summary

BKT field in RAB
FIND operation
GET operation
offset
PUT operation
READ operation
SPACE operation
summary
WRITE operation
BKZ field in ALL block
CREATE operation
DISPLAY operation
offset
OPEN operation
RSTS/E
summary
/BL
/BL switch
CMP utility
DMP utility
DSC utility
FLX utility
PIP utility
RMSCNV utility
Blank line
BLDLAINIT.CMD
.BLK
See Program section
BLK command
.BLKB directive
/BLKS keyword
ACS command
.BLKW directive
BLN field in ALL block
offset
summary
XB$LAL code
BLN field in DAT block
offset
summary
XB$DTL code
BLN field in FAB
offset
summary
FB$BLN code
BLN field in KEY block
offset
summary
XB$KYL code
BLN field in PRO block
offset
summary
XB$PRL code
BLN field in RAB
offset
summary
BLN field in SUM block
offset
summary
XB$SML code

RMS-11 Macros 5-78
RMS-11 Macros D-3
i::;:_').,
RMS=ll
v
"''
4-6,
4-12 to 4-13
Macros
RMS-11
RMS-11 Macros 5-50, 5-52, 5-55
RMS-11 Macros 5-61, 5-65, 5-68
RMS-11 Macros 6-115
RMS-11 Macros 5-93, 5-96
RMS-11 Macros 5-98, 5-100
RMS-11 Macros 5-120
RMS-11 Macros 6-117
RMS-11 Macros 5-127, 5-129
RMS-11 Macros 5-17
RMS-11 Macros 5-30
RMS-11 Macros 6-2
RMS-11 Macros 5-79
RMS-11 Macros D-3 to D-4
RMS-11 Macros 6-8
Crash D'ump Analyzer 2-6
Utilities 12-2
Utilities 11-4
Utilities 8-12
Utilities 4-6
Utilities 3-11
RMS-11 Utilities 4-8
PDP-11 MACR0-11 2-1
System Generation (llM) 3-5
MCR Operations 3-22
PDP-11 MACR0-11 6-38
MCR Operations 3-8
PDP-11 MACR0-11 6-38
RMS-11 Macros 6-2
RMS-11 Macros 6-9
RMS-11 Macros 6-14
RMS-11 Macros 6-15
RMS-11 Macros 6-22
RMS-11 Macros 6-28
RMS-11 Macros 6-67
RMS-11 Macros 6-69
RMS-11 Macros 6-108
RMS-11 Macros 6-109
RMS-11 Macros 6-115
RMS-11 Macros 6-118
RMS-11 Macros 6-145
RMS-11 Macros 6-146

Index-21

MASTER INDEX
Block

Introduction 3-2, Gloss-5
RMS-11 Introduction 2-3
RMS-11 User's Guide 1-16

See also Control block
access mode

RMS-11 Introduction 3-11 to 3-12,
3-14 I 4-7
RMS-11 User's Guide 1-20, 3-6

see also Shared access
See also BKT field in RAB
remote
RMSCNV utility
sequential

RMS-11 User's Guide B-3
RMS-11 Utilities 4-1
RMS-11 Introduction 3-12
RMS-11 Introduction 3-12

VBN

allocating
VFY utility
bad
detection
RCT
handling on MSCP disks
RCT
listing

Utilities 9-8
System Management 5-3
System Management 5-3
System Management 4-25

IOX

notification
RCT
recovery
RCT
removing from testing

System Management 5-3
System Management 5-1
System Management 4-24

IOX

replacement
RCT
replacement completion
RCT
revector ing
RCT
specifying

System Management 5-1, 5-3
System Management 5-4
System Management 5-4

IOX

steps to replace
RCT
context
readable block
writable block
incomplete replacement checking
RCT
label
locating
See SPACE operation
logical
RCT
magnetic tape
user definable
operations
processing
reading
See READ operation
recovering lost
VFY utility
replacement
RCT
replacement functions listed
RCT
size, magtape
See BLS field in FAB
spanning

System Management 4-24
System Management 5-3
RMS-11 Introduction 4-7
RMS-11 Introduction 4-7
RMS~ll Introduction 4-7
System Management 5-1
Task Builder 2-8
RMS-11 Introduction 2-3
System Management 5-2
RMS-11 Introduction 2-4
RMS-11 Introduction 4-7
RMS-11 Introduction 4-i, 4-7

Utilities 9-7
System Management 5-2
System Management 5-1
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-16, 1-19,
3-1

variable-length records
verifying

RMS-11 User's Guide 2-16
Index-22

MASTER INDEX
Block
verifying (Cont.)
VFY utility
virtual
writing
See WRITE operation
Block boundary
RMSDEF utility
Block buffer size
BLOCK command
command line format
example
Block context
Block I/O
Block I/O completion
Block locking
enabling
Block mode
EDI editor
Block number switch
BLOCK ON/OFF command
EDI editor
Block operation
Block operation macro
declaring
$READ
$SPACE
$WRITE
Block processing
Block size
magnetic tape
parameter to FDBK$A
Block stream
Block-declaration macro
BLOCK SPAN
RMSDES utility
Blocked record
See FB$BLK mask in RAT field
Blocked task
BLS field in FAB
CREATE operation
off set
OPEN operation
summary
$BMSET
$BNUM
predefined syntax element in
MML
Boot
Boot block
hardware
writing on system device
BOOT command
command line format
error message
example
/BOOT keyword
SAVE command
VMR
Bootstrap
hardware
mapped baseline system
procedure
software

Utilities 9-7

RMS-11 Utilities A-9
I/O Operations 3-21, 3-27
MCR Operations 3-22
MCR Operations 3-22
MCR Operations 3-22
RMS-11 Macros 4-12
I/O Operations 3-30, 3-35
I/O Operations 2-44 1 3-35
I/O Operations 2-15
Program Development 1-3
Crash Dump Analyzer 2-7
Utilities 2-28
RMS-11 Macros 4-14
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

C-3
5-98, 5-100
5-120
5-127, 5-129
4-11

I/O Drivers 8-14
I/O Operations 2-11
RMS-11 Macros 4-11
RMS-11 Macros 2-8 to 2-9
RMS-11 Utilities 2-37
Introduction 5-7, Gloss-5,
Gloss-33
Command Language 7-23 to 7-26
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
Error Logging

5-15
6-24
5-79
6-29
4-20

System Management 12-40
Introduction Gloss-5
MCR Operations
MCR Operations
MCR Operations
MCR Operations
MCR Operations

3-159
3-23
3-23
3-25
3-25

System Management 10-40
System Generation
System Generation
System Generation
System Generation
Index-23

(llM) 1-5, B-1
(HM)

4-2

(llM) B-1
(llM) 1-5

MASTER INDEX
Bootstrap (Cont.)
summary of addresses
virgin system
nonstandard unmapped
Bootstrap block
Bootstrapping
system
DB-based
DM-based
DR-based
/BOT keyword
SET command
VMR
BOttom command
EDI editor
BOTTOM function
/BP switch
RMSDSP utility
BPA field in FAB
CLOSE operation
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
BPS field in FAB
CLOSE operation
CREATE operation
ENTER operation
ERASE operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
/BR switch
PIP utility
QUE /LI command
Branch
location
off set
Branch instruction, address
calculation
Break-through write
Breakpoint
address register
clear
set
definition
EOS
EOX
instruction
proceed count
purpose
removing
set
setting in a task
Breakpoint register
BREAKPOINT TO XDT command
Brief format report

System Generation (llM) B-2
System Generation (llM) 6-2
System Generation (llM) 6-13
I/O Operations E-1
Release Notes 1-34
Release Notes 1-34
Release Notes 1-34
System Management 10-47
Utilities 2-12, 2-29
EDT Editor 2-9, 5-21
RMS-11 Utilities 5-3 to 5-4
RMS-11 Macros 2-7, 3-5
RMS-11 Macros 5-4
RMS-11 Macros 5-13
RMS-11 Macros 5-36
RMS-11 Macros 5-42
RMS-11 Macros 6-24
RMS-11 Macros 5-74
RMS-11 Macros 5-87
RMS-11 Macros 5-104
RMS-11 Macros 5-110
RMS-11 Macros 5-117
RMS-11 Macros 6-30
RMS-11 Macros 2-7, 3-5
RMS-11 Macros 5-4
RMS-11 Macros 5-13
RMS-11 Macros 5-36
RMS-11 Macros 5-42
RMS-11 Macros 6-24
RMS-11 Macros 5-74
RMS-11 Macros 5-87
RMS-11 Macros 5-104
RMS-11 Macros 5-110
RMS-11 Macros 5-117
RMS-11 Macros 6-31
Utilities 3-25
Batch and Queue 2-15
ODT 2-6, 4-5
ODT 7-2
PDP-11 MACR0-11 5-10
I/O Drivers 2-22
ODT 3-1 to 3-3, 5-1
ODT 2-6, 3-2, 5-4
ODT 3-2
ODT 3-1
System Generation (llM) 3-8
System Generation (llM) 3-8
system Generation (llM) 3-9
ODT 2-7, 5-4
ODT 2-7, 3-3, 5-4
System Generation (llM) 3-8
ODT 2-8, 3-2
ODT 3-1
Program Development 5-6
Program Development 5-6
MCR Operations 3-26
Error Logging 3-11
Index-24

MASTER INDEX
/BRIEF qualifier
SHOW QUEUE command
BRIEF qualifier
BRK command
Basic MCR
command line format
example
BRO command
/BRO keyword
SET command
VMR
BROADCAST command

command line format
display format
error message
example
option
ALL
LOG
Broadcast option
BRU utility
See also BACKUP command
bad block processing
command line
parameter
command qualifier
description
function
summary
data transfer
device information
device support
disk initialization
error message
example
file creation date
file revision date
file treatment
file header
file synonyn
lost file
restriction
backup tapes
stand-alone
booting
CNF and
locating
system image copying
task build
using
backup target system disk
recovering disk space
BRU64K
CNF
altering CSRs using
altering vectors using
restriction
/BS keyword
MOUNT command
BS macro
MML

Batch and Queue 2-15
EDT Editor 7-17
MCR Operations 3-26
System Generation (llS) 2-3
MCR Operations 3-26
MCR Operations 3-26
MCR Operations 3-27
MCR Operations 3-172
System Management 10-48
Introduction 6-1
Command Language 3-29 to 3-31,
9-6
MCR Operations 3-27
MCR Operations 3-27
MCR Operations 3-29
MCR Operations 3-30
MCR Operations 3-29
MCR Operations 3-28
MCR Operations 3-28
MCR Operations 3-172
System Management 10-48
Command Language 5-12, 5-60 to
5-71
Utilities 7-24
Utilities 7-5
Utilities 7-6
Utilities 7-12
Utilities 7-11
Utilities 7-8
Utilities 7-26
Utilities 7-1
Utilities 7-5
Utilities 7-17
Utilities 7-34
Utilities 7-28
Utilities 7-27
Utilities 7-27
Utilities 7-26
Utilities 7-27
Utilities 7-27
Utilities 7-27
Release Notes 1-35
Utilities 7-22
Utilities 7-23
Utilities 7-22
Utilities 7-23
Utilities 7-26
System Generation (llM) 6-3
System Generation (llM) 6-9
System Generation (llM) 6-3
System Generation (llM) 2-4
System Generation (llM) 2-4
System Generation (llM) 2-4
Release Notes 1-23
MCR Operations 3-119
System Management 12-26
Index-25

MASTER INDEX
/BS switch
FLX utility
PIP utility
BST macro
MML
Bucket
continuation
fill number
populating indexed files
fill number, data
See DFL field in KEY block
fill number, honoring
See RB$LOA mask in ROP field
fill number, index
See IFL field in KEY block
high-key value
I/O units
index
locking
and shared access
FIND operation
GET operation
relative files
RMSCNV utility
size
See BKS field in FAB
See BKZ field in ALL block
Bucket format
indexed files
Bucket size
calculation
alternate indexes
primary index
indexed files
prologue
relative files
RMSDEF utility
Bucket splitting
RRV
BUCKET SIZE
RMSDES utility
area section
file section
/BUF keyword
SET command
VMR
Buffer
cache
current
EDT
I/O
size
MAIN
multiple
PASTE
record
See RBF field in RAB
rules for naming
SHOW BUFFER command
special
string search
text
type-ahead

Utilities 4-6
Utilities 3-15
System Management 12-27 to 12-28
RMS-11 Introduction 4-2
RMS-11 User's Guide 5-5
RMS-11 Introduction 4-2
RMS-11 User's Guide 6-28

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 5-5 to 5-6
User's Guide 1-16
User's Guide 5-6
Introduction 4-3
User's Guide 2-8
User's Guide 2-8
User's Guide 2-8
User's Guide 4-1
Utilities 4-10

RMS-11 User's Guide 5-2
RMS-11 User's Guide 1-19
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 6-19
User's Guide 6-16
User's Guide 6-15
User's Guide 5-2
User's Guide 4-2
Utilities A-15
User's Guide 5-11
User's Guide 5-12

RMS-11 Utilities 2-43, 2-45
RMS-11 Utilities 2-32
MCR Operations 3-173
System Management 10-48
Introduction Gloss-5
RMS-11 User's Guide 4-15
EDT Editor 2-35
Introduction 2-4, 2-17
RMS-11 User's Guide 1-14
RMS-11 User's Guide 2-5
EDT Editor 1-2, 2-1, 6-5
EDT Editor 1-8, 2-32
RMS-11 User's Guide 2-18, 3-14,
4-15
EDT Editor 1-2, 2-1, 6-5
EDT Editor 6-6
EDT Editor 9-15
Writing I/O Driver 6-9
EDT Editor 5-23
EDT Editor 1-2, 2-1
Program Development 1-3
I/O Drivers 2-37

Index-26

MASTER INDEX
Buff er
type-ahead (Cont.)
clearing
user
See also UBF field in RAB
Buffer address
parameter to FDBK$A
Buffer format
for GTIM$ directive
for GTSK$ directive
Buff er pool
Buffer record
maximum size
Buffer space
statistics
shown with PARAMETERLIST
Buffering
variable-length
/BUFFERS qualifier
BRU utility
BUFFERSIZE command

MCR Operations 2-18
RMS-11 User's Guide 1-14
I/O Operations 2-11
Executive 5-95
Executive 5-97
RMS-11 Macros 3-5
Task Builder 11-23
System Management 4-42
I/O Drivers 3-28
Utilities 7-14
System Management 4-26

IOX

Build file
modifying
to improve performance
Building tasks
See also Task builder
Built-in variables
Bundled
/BY switch
DMP utility
BYE command
command line format
error message
example
keyword
/HOLD
task
aborting
nonprivileged
privileged
Byte
.BYTE directive
Byte location
displaying
opening
Byte mode
opera tor
ASCII
octal

Task Builder F-1, F-5
RMS-11 User's Guide 1-13
I/O Operations 7-5
Introduction 4-12, Gloss-5
Utilities 11-5
MCR Operations 3-31
MCR Operations 3-32
MCR Operations 3-32
MCR Operations 3-32
MCR Operations 3-31
MCR Operations 3-31
MCR Operations 3-32
RMS-11 Introduction 2-1
PDP-11 MACR0-11 6-23 to 6-24
ODT 4-2 to 4-6
ODT 4-2 to 4-6
ODT 2-7, 4-6
ODT 2-7, 4-2 to 4-3

c
AC operator
C register
indicator
$C5TA (Radix-50 to ASCII)
/CA switch
RMSCNV utility
••• CA.
Cache
indexed files
Cache corruption
write-back
checking by RCT
Cache data
write-back

PDP-11 MACR0-11 3-5, 6-35 to 6-36
ODT 2-6, 5-3, 7-3
ODT 2-3, 2-8, 7-3
System Library 5-11
RMS-11 Utilities 4-8
System Management 12-3
RMS-11 User's Guide 4-15
RMS-11 User's Guide 7-9
System Management 5-1

Index-27

MASTER INDEX
Cache data
write-back (Cont.)
preventing loss of
Calculated location
return from
Calculating file work space
(RMS I FL)
Calculation
off set
relocatable
address
CALL
macro
Call
operation routine
arguments in memory
macro argument
CALL ABORT
CALL ALTPRI
CALL ASNLUN
CALL ATRG
CALL CANALL
CALL CANMT
CALL CLREF
CALL CNCT
CALL CRAW
CALL CRGF
CALL CRRG
CALL DECLAR
CALL DISCKP
CALL DSASTR
CALL DTRG
CALL ELAW
CALL ELGF
CALL EMST
CALL ENACKP
CALL ENASTR
CALL EXIT
CALL EXITIF
CALL EXST
CALL EXTTSK
CALL GETCII
CALL GETLUN
CALL GETMCR
CALL GETPAR
CALL GETREG
CALL GETTIM
CALL GETTSK
CALL GMCX
CALL GTCMCI
CALL INASTR
CALL MAP
CALL MARK
CALL PWRUP
CALL QIO
CALL RCST
CALL READEF
CALL RECEIV
CALL RECOEX
CALL RESUME
CALL RPO!
CALL RREF
CALL RUN
CALL SDRC
CALL SDRP
CALL SEND
CALL SETCLI

System Management 5-5
ODT 2-6, 4-6
RMS-11 Utilities 3-12
ODT 7-1
ODT 7-1
ODT 7-1
I/O Operations 4-1
RMS-11 Macros 2-13
RMS-11 Macros 2-14
RMS-11 Macros 2-13
Executive 5-8
Executive 5-10
Executive 5-12
Executive 5-16
Executive 5-51
Executive 5-29
Executive 5-28
Executive 5-31
Executive 5-37
Executive 5-40
Executive 5-42
Executive 5-52
Executive 5-55
Executive 5-53
Executive 5-56
Executive 5-58
Executive 5-60
Executive 5-64
Executive 5-66
Executive 5-65
Executive 5-70
Executive 5-67
Executive 5-71
Executive 5-73
Executive 5-79
Executive 5-81
Executive 5-84
Executive 5-89
Executive 5-91
Executive 5-95
Executive 5-97
Executive 5-86
Executive 5-75
Executive 5-53
Executive 5-100
Executive 5-103
Executive 5-170
Executive 5-112
Executive 5-118
Executive 5-125, 5-127
Executive 5-120
Executive 5-122
Executive 5-139
Executive 5-129
Executive 5-136
Executive 5-140
Executive 5-152
Executive 5-155
Executive 5-150
Executive 5-148
Index-28

MASTER INDEX
CALL SETEF
CALL SETT IM
CALL SMSG
CALL SPAWN
CALL SREA
CALL SREF
CALL SREX
CALL statement
CALL STLOR
CALL STOP
CALL STOP FR
CALL SUSPND
CALL ULGF
CALL UN MAP
CALL USTP
CALL WAIT
CALL WAITFR
CALL WFSNE
CALL WTQIO
$CALLOV
predefined syntax element in
MML
CALLS argument
CAN command
VMR
CANCEL command
Basic MCR
command line format
example
VMR
command line format
example
Cancel I/O entry point
DDT conditions
Cancel Mark Time Requests
directive
Cancel Selective Marktime
directive
Cancel Time Based Initiation
Requests directive
CAPS LOCK key
Card input error
error recovery
Card reader
binary format
control character
data format
data format translation
device-specific QIO
format translation
indicator light
1 ist of
'
standard QIO
switch
list of
Card reader check
recovery
Card reader format, sequence
number as comment
CARD FORMAT arqument
CarrTage control
See also RAT field in FAB
RMSDEF utility
specifying

Executive 5-159
Executive 5-195
Executive 5-162
Executive 5-172
Executive 5-184
Executive 5-188
Executive 5-184
Error Logging 5-33
Executive 5-198
Executive 5-200
Executive 5-201
Executive 5-169
Executive 5-206
Executive 5-207
Executive 5-209
Executive 5-103
Executive 5-225
Executive 5-221
Executive 5-116
System Management 12-45
PDP-11 MACR0-11 8-11
MCR Operations 3-33
System Management 10-11
Command Language 7-22 to 7-23,
9-6
MCR Operations 3-33
System Generation (llS) 2-2
MCR Operations 3-33
MCR Operations 3-33
System Management 10-11
System Management 10-11
System Management 10-11
Writing I/O Driver 2-4
Writing I/O Driver 4-10
Executive 5-29
System Generation (llM) 4-28
Executive 5-51
Introduction 1-9
Command Language 3-14
I/O Drivers 11-3
I/O Drivers 11-1
I/O Drivers 11-9
I/O Drivers 11-8
I/O Drivers 11-9
I/O Drivers 11-9
I/O Drivers 11-3
I/0 Drivers 11-10
I/O Drivers 11-5 to 11-6
I/O Drivers 11-2
I/O Drivers 11-5 to 11-6
I/O Drivers 11-4
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 8-9
RMS-11 Utilities A-9
Index-29

MASTER INDEX
Carriage control
specifying (Cont.)
for unlabeled tape
Carriage return
See also RETURN key
automatic
Carriage-control device
See FB$CCL mask in DEV field
Carriage-return carriage control
See FB$CR mask in RAT field
CARRIAGE CONTROL
RMSDES-utility
Case control
CASE statement
CASE MATCH argument
cassette

block length
device-specific QIO
space functions
standard QIO
status return
structure
$CATS (ASCII to Radix-50)
$CAT5B (ASCII with Blanks to
Radix-50)
Catch-All Task
see also TDX
restriction for DCL
Catchall task
/CB switch
CMP utility
CBD
$CBDAT (Binary date to decimal)
$CBDMG (Binary to unsigned
decimal)
$CBDSG (Binary to signed decimal)
CBM macro
MML
$CBOMG (Binary to unsigned octal)
$CBOSG (Binary to signed octal)
$CBTA (General purpose binary to
ASCII)

$CBTMG (Binary byte to octal)
CC command
EDI editor
/CC keyword
MOUNT command
/CC switch
CCBM macro
MML
CCML$
CD command
EDI editor
/CD switch
PIP utility
RMSBCK utility
CDA
See also Crash dump
debugging driver code
installed
invoking from indirect command
file
running
uninstalled

I/O Operations G-11
I/O Drivers 2-34, 3-27 to 3-28

RMS-11 Utilities 2-37
PDP-11 MACR0-11 6-19
Error Logging 5-34
PDP-11 MACR0-11 8-9
I/O Drivers 9-1
RMS-11 Macros 3-2, 5-20, 5-37,
5-43, 5-77, 5-88, 5-104,
5-111, 5-118
I/O Drivers 9-8
I/O Drivers 9-3
I/O Drivers 9-7
I/O Drivers 9-2
I/O Drivers 9-3 to 9-5
I/O Drivers 9-6
System Library 4-6
System Library 4-8
Release Notes 1-28
System Management 12-3
Utilities 12-2
Executive 5-42
System Library 5-2
System Library 5-3
System Library 5-4
System Management 12-28
System Library 5-7
System Library 5-8
System Library 5-10
System Library 5-9
Utilities 2-30
MCR Operations 3-119
Task Builder 10-7
System Management 12-28
I/O Operations 6-9, 6-12
Utilities 2-30
Utilities 3-16
RMS-11 Utilities 6-8 to 6-9
Error Logging 1-1
Writing I/O Driver 3-20
Crash Dump Analyzer 1-3
Crash Dump Analyzer 1-5
Crash Dump Analyzer 1-3
Crash Dump Analyzer 1-3

Index-30

MASTER INDEX
CDA command line
binary file
crash input file
default list file
symbol file
CDA message
analysis
example of
fatal
example of
$CDDMG (Double-precision binary
to decimal)
CDR symbolic argument
CDT field in DAT block
DISPLAY operation
off set
OPEN operation
RSTS/E
summary
$CDTB {Decimal to binary)
Cell
relative files
sequential files
Central buffer pool
Central processing unit
See CPU
CFL
declaration
conditional
data i tern
definition
scope
variable
definition
expression
conditionals in
list handling
intermediate form modules
lexical conditionals
signalling
spaces and tabs in text
statement
ACTION
BEGIN-END
CALL
CASE
CONTROL
CRASH
DECLARE
DECODE
DECREMENT
DYNAMIC TABLE
ENABLE
FILE
FIND
IF-THEN-ELSE
INCREMENT
LEAVE
LIST
LITERAL
MESSAGE
MODULE

PACKET
POINTER
PRINT FORMATTING
PROCEDURE

Crash Dump Analyzer 1-3
Crash Dump Analyzer 1-3
Crash Dump Analyzer 1-4
Crash Dump Analyzer 1-4
Crash Dump Analyzer 1-3
Crash Dump Analyzer 1-4
Crash Dump Analyzer A-1
Crash Dump Analyzer A-1
System Library 5-5
PDP-11 MACR0-11 6-19
RMS-11 Macros 5-32
RMS-11 Macros 6-14
RMS-11 Macros 5-81
RMS-11 Macros D-4
RMS-11 Macros 6-16
System Library 4-4
RMS-11 Introduction 3-5
RMS-11 User's Guide 4-1
RMS-11 User's Guide 3-2
RMS-11 Macros 3-5
Error Logging 1-1, 1-3, 1-5, 5-1
Error Logging 5-29 to 5-30
Error Logging 5-26
Error Logging 5-3
Error Logging 5-26
Error Logging 5-26
Error Logging 5-2
Error Logging 5-2
Error Logging 5-39
Error Logging 5-1
Error Logging 5-36
Error Logging 5-40
Error Logging 5-2
Error Logging 5-30
Error Logging 5-36
Error Logging 5-33
Error Logging 5-34
Error Logging 5-32
Error Logging 5-41
Error Logging 5-27
Error Logging 5-32
Error Logging 5-31
Error Logging 5-37
Error Logging 5-40
Error Logging 5-37 to 5-38
Error Logging 5-39
Error Logging 5-34
Error Logging 5-31
Error Logging 5-35
Error Logging 5-39
Error Logging 5-33
Error Logging 5-41
Logging 5=32
Error Logging 5-28
Error Logging 5-38 to 5-39
Error Logging 5-41
Error Logging 5-33 to 5-34
Index-31

MASTER INDEX
CFL
statement (Cont.)
PUT
RETURN
SEARCH
SELECT
SET
SIGNAL
SIGNAL STOP
SUB PACKET
TABLE
WHILE/UNTIL/DO
WRITE
WRITE GROUP
table structure
user interface
command mode
option mode
CFL command line
DEVSMl
CFL command mode
CFL comments
CFL data type
ASCII
automatic conversion
binary byte
bit
expression
logical
numeric
attribute option
byte
default
longword
quadword
radix option
value
word
numeric field
numeric literal
pointer
RSXTIME
string
numeric value
VMS TIME
CFL expression
definition
logical operators
numeric operators
relational operators
string operators
CFL file
command
error
input
report
user
CFL function
%CND
%CNV
%CNV$RSXTIME
%CNV$STRING
%CNV$VMSTIME
%COD
%COM
%CTL
format

Error Logging 5-39
Error Logging 5-33
Error Logging 5-40
Error Logging 5-34 to 5-35
Error Logging 5-31
Error Logging 5-40 to 5-41
Error Logging 5-41
Error Logging 5-29
Error Logging 5-37
Error Logging 5-35
Error Logging 5-31
Error Lo99ing 5-31
Error Logging 5-36
Error Logging 5-43
Error Logging 5-43
Error Logging 4-36
Error Logging 5-43
Error Logging 5-3
Error Logging 5-5
Error Logging 5-4
Error Logging 5-4
Error Logging 5-4, 5-7
Error Logging 5-4
Error Logging 5-4
Error Logging 5-5
Error Logging 5-5
Error Logging 5-5
Error Logging 5-5
Error Logging 5-5
Error Logging 5-5
Error Logging 5 ... 5
Error Logging 5-5
Error Logging 5-5
Error Logging 5-7
Error Logging 5-6
Error Logging 5-7
Error Logging 5-7
Error Logging 5-4
Error Logging 5-4
Error Logging 5-7
Error Logging 5-9
Error Logging 5-3
Error Logging 5-10
Error Logging 5-13 to 5-15
Error Logging 5-11 to 5-13
Error Logging 5-9
Error Logging 5-3
Error Logging 5-4
Error Logging 5-3
Error Logging 5-3
Error Logging 5-3
Error Logging 5-17
Error Logging 5-17 to 5-18
Error Logging 5-19
Error Logging 5-19
Error Logging 5-19
Error Logging 5-19
Error Logging 5-20
Error Logging 5-21
Error Logging 5-16
Index-32

MASTER INDEX
CFL function (Cont.)
%LOK
%PKT
%RPT
%STR
%TIM
%USR
CFL literals
CFL named variable
CONTEXT
COUNT
LENGTH
POINTER
CFL operands
literais
variables
CFL operator precedence
CFL option mode
CFL primitives
CFL statement
definition
.CHAIN directive
example
format
Chaining

Error Logging 5-21
Error Logging 5-22
Error Logging 5-22
Error Logging 5-23 to 5-24
Error Logging 5-25
Error Logging 5-25
Error Logging 5-9
Error Logging 5-8
Error Logging 5-8
Error Logging 5-9
Error Logging 5-8
Error Logging 5-8
Error Logging 5-9
Error Logging 5-9
Error Logging 5-15
Etror Logging 5-43
Error Logging 5-1
Error Logging 5-3
MCR Operations 4-28
MCR Operations 4-29
MCR Operations 4-28
System Generation (llM) 4-9
Executive 4-1, 5-129, 5-155

See also Saved answer file
See also Standard Function
System
definition
restriction
CHANGE command
EDI editor

System Generation (llM) 3-9
System Generation (llM) 3-9
EDT Editor 2-5, 2-36, 7-1
Program Development 2-16, 7-5
Utilities 2-12, 2-29
EDT Editor 5-2
EDT Editor 8-1

for keypad editing
for nokeypad editing
Change mode
EDT
Changeable key

Introduction 2-3, 2-17, Gloss-6
RMS-11 Introduction 3-10
RMS-11 User's Guide 6-9

See also XB$CHG mask in FLG field
CHANGES
RMSDES utility
Changing
See also Displaying
contents of location
display mode
Changing case
keypad editing
nokeypad editing
showing current case setting
CHAR function
Character
control
OPEN command
conversion to 16-bit value
correcting transposition of
delimiting
flagging uppercase or lowercase
generating printable
illegal
legal label
lowercase
converting

RMS-11 Utilities 2-40
ODT 4-1
ODT 4-3
EDT Editor 2-18, 5-48
EDT Editor 8-6
EDT Editor 9-15
EDT Editor 5-16
ODT 2-3 to 2-4
I/O Drivers 2-27, 2-33
MCR Operations 2-14
MCR Operations 3-135
PDP-11 MACR0-11 6-25
EDT Editor 10-6
PDP-11 MACR0-11 3-3
EDT Editor 9-2
PDP-11 MACR0-11 6-26 to 6-28
ODT 2-8
PDP-11 MACRO=ll 3~3
PDP-11 MACR0-11 2-3
MCR Operations 3-184
System Management 10-51

Index-33

MASTER INDEX
Character (Cont.)
separating
special
string packing
task-buffering of received
translating
mag tape
vertical format control
Character editing
See CHANGE command
Character set
ASCII
legal
Radix-SO
Checkpoint
area
in task image
file
allocating
number of blocks
discontinuing
example
freeing
space
allocating

PDP-11 MACR0-11 3-3
PDP-11 MACR0-11 3-1 to 3-3
PDP-11 MACR0-11 6-29 to 6-30
I/O Drivers 2-36
MCR Operations 3-124
I/O Drivers 2-34, 10-6

PDP-11 MACR0-11 A-1 to A-3
PDP-11 MACR0-11 3-1 to 3-3
PDP-11 MACR0-11 A-4 to A-5
Task Builder B-9
MCR Operations 3-8
MCR Operations 3-8
MCR Operations 3-8
MCR Operations 3-8
MCR Operations 3-9
MCR Operations 3-8
Task Builder 10-6, 10-10
Command Language 5-11, 5-65, 5-74,
6-68
I/O Operations E-2

Checkpoint file
Checkpoint File Header
Checkpointable task
specifying a
Checkpointing

Task Builder 10-6, 10-10
Introduction. 5-6 to 5-7, 5-9,
Gloss-2, Gloss-6
System Generation (llM) 4-43
Command Language 5-11, 6-68
Executive 2-11
I/O Drivers 3-31
System Management 14-3
System Management 14-3
System Management 14-3
System Generation (llM) 4-43

during buffered I/O
during terminal input
dynamic common regions
static common regions
tasks
with system checkpoint file
Checksum
calculating
SLP utility
file content validating
PAT utility
CHGC command
CHNGCASE function
. select range
CINT$
CINT$ directive
Circumflex ( "")

Utilities 13-3

cross-reference listing
global cross-reference
of an overlaid task
Circumflex ("") and error message
Circumflex (""} command
CIS
See Commercial Instruction Set
/CKP keyword
INSTALL command
VMR
RUN command
CL command
EDI editor

Utilities 14-6
EDT Editor 8-6
EDT Editor 2-18, 5-48
EDT Editor 2-18
Executive 5-18 to 5-19
Writing I/O Driver 3-1
Introduction 1-4, Gloss-6
Command Language 3-15, 3-18
Task Builder 10-12 to 10-13
Task Builder 4-13
EDT Editor A-1
EDT Editor 8-25
ODT 2-5, 4-4

MCR Operations 3-94
System Management 10-21
MCR Operations 3-152
Utilities 2-29

Index-34

MASTER INDEX
CL:
pseudo device
CLEAR command
RMSDES utility
defining areas by default
in indirect command file
PROTECTION attribute
with CREATE
with SAVE
Clear Event Flag directive
Clear relocation register
Clearing attributes (RMSDES)
See Attribute, clearing
Clearing screen with CTRL/W
Clearing terminal end of file
CLEF$
/CLI
keyword
HELP command
INSTALL command
VMR
SET command
switch
Indirect
CLI

See also DCL
adding to account entry
alternate
changing
contained in account entry
continuation lines
data structures
initializing
removing
DCL
default
resetting
specifying
definition
disabling
displaying
command line
eliminating
enabling
example
FORTRAN
MACR0-11
Executive directives
information
displaying
installing
interaction with system
MCR
multi-CLI support
prompting
removinq
serial command processing
setting up
status bit
list

Command Language 5-6
EDT Editor 7-2
RMS-11 Utilities 2-6, 2-18, 2-25
to 2-26
RMS-11 Utilities 2-44
RMS-11 Utilities 2-4
RMS-11 Utilities 2-33
RMS-11 Utilities 2-8, 2-28
RMS-11 Utilities 2-27
Executive 5-28
ODT 2-10
EDT Editor 5-8
I/O Operations 4-25
Executive 5-28
Crash Dump Analyzer 2-1
MCR Operations 3-65
MCR Operations 3-95
System Management 10-22
MCR Operations 3-174
MCR Operations 4-19
EDT Editor 2-2
Introduction 1-5, 1-8, Gloss-6
Command Language 1-1
System Management 11-1, 11-3 to
11-4
System Management 2-3
System Management 12-2
System Management 2-5
System Management 2-1
System Management 11-8
MCR Operations 3-36
MCR Operations 3-35
Program Development 1-1 to 1-3
MCR Operations 3-31
MCR Operations 3-174
Batch and Queue Gloss-2
MCR Operations 3-35, 3-37
System Management 2-4
MCR Operations 4-3
MCR Operations 3-35
MCR Operations 3-36
System Management 11-10 to 11-20
System Management 11-15 to 11-20
System Management 11-10 to 11-15
System Management 11-3
MCR Operations 3-39
MCR Operations 3-95
System Management 10-22
System Management 11-3 to 11-4
Program Development 1-1 to 1-3
System Management 2-3
System Management 2-1, 2-3, 2-5
System Management 11-7 to 11-9
Svstem Manaaement 10-35
System Managem~~t 11-9
MCR Operations 3-35
MCR Operations 3-39
Index-35

MASTER INDEX
CL! (Cont.)
system messages to
task names
user-written
writing
CL! command
command line format
error message
example
keyword
/DISABLE
/ELIM
/ENABLE
/!NIT
/MESSAGE
/SHOW
/UNOVR
subkeyword
/CPR
/DISABLE
/DPR
/LGO
/MESSAGE
/NULL
/PRIV
/PROMPT
/QUIET
/RESTRICT
/TASK
CL! Parser Block
See CPB
CL! parser block dump
<CLI> symbol
$CLINS routine
CLKDF$
Clock
system
watchdog timer
Clock queue
information
displaying
CLOCK QUEUE command
Clock queue dump
Clock queue switch
CLOSE & DELETE command
EDI editor
CLOSE command
EDI editor
.CLOSE directive
format
$CLOSE macro
CLOSE operation
BDB requirement
$CLOSE macro
I/O buffer requirement
wildcard loop
CLOSE SECONDARY command
EDI editor
CLOSE$
automatic file truncation
effect of on F.CNTG
format
macro call

System Management 11-5 to 11-7
System Management 11-4
System Generation (llM) 4-61
System Management 11-3
MCR Operations 3-35
MCR Operations 3-35
MCR Operations 3-40
MCR Operations 3-40
MCR Operations 3-35
MCR Operations 3-35
MCR Operations 3-36
MCR Operations 3-36
MCR Operations 3-39
MCR Operations 3-39
MCR Operations 3-40
MCR Operations 3-36
MCR Operations 3-37
MCR Operations 3-37
MCR Operations 3-37
MCR Operations 3-38
MCR Operations 3-38
MCR Operations 3-38
MCR Operations 3-38
MCR Operations 3-38
MCR Operations 3-39
MCR Operations 3-39
Crash Dump Analyzer 3-2, 3-31
MCR Operations 4-13
Writing I/O Driver 5-5
Crash Dump Analyzer B-4
System Generation (llM) 4-14
System Generation (llM) 4-15
Command Language 7-12 to 7-15,
7-23, 7-60, 9-37
MCR Operations 3-42
MCR Operations 3-42
Crash Dump Analyzer 3-50
Crash Dump Analyzer 2-3
Utilities 2-30
Utilities 2-27, 2-29
MCR Operations 4-29
MCR Operations 4-29
RMS-11 Macros 5-3
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Macros 3-8
RMS-11 Macros 2-8
RMS-11 Macros 5-3
RMS-11 Macros 2-7
RMS-11 Macros 3-10
Utilities 2-30
I/O Operations 4-22
I/O Operations 2-7
I/O Operations 3-18
I/O Operations 3-18
Index-36

MASTER INDEX
CLOSES command
EDI editor
Closing
location
definition
open location
/CLQ
CLQ command
command line format
example
CLSTR option
Cluster library
See also Library
Cluster size
See RTV field in FAB
CLUSTER SIZE
RMSDES utility
/CM switch
SLP utility
/CMD keyword
RUN command
CMKT$
/CMP switch
DSC utility
CMP utility

Utilities 2-30
ODT 4-2
ODT 4-1
ODT 2-5, 4-2
Crash Dump Analyzer 2-1
MCR Operations 3-42
MCR Operations 3-42
MCR Operations 3-42
Task Builder 11-8 to 11-9
Task Builder 5-44
RMS-11 User's Guide 8-7 to 8-9

RMS-11 Utilities 2-31
Task Builder i0-8
Utilities 13-15
MCR Operations 3-152
Executive 5-29
Utilities 8-14
Command Language 4-69 to 4-75,
9-13

See also DIFFERENCES command
command line
error message
output file format
switch
default
CNCT$
%CND function
CND symbolic argument
CNF
DSC64K.SYS and
See DSC utility
stand-alone BRU and
See BRU utility
.CNF module
%CNV function
%CNV$RSXTIME
%CNV$STRING
%CNV$VMSTIME
/CO file switch
PRI command
QUE /MOD command
/CO job switch
PRI command
QUE /MOD command
/CO switch
CMP utility
FLX utility
LBR utility
PIP utility
CO:
pseudo device
COBOL
COBOL command

Utilities 12-1
Utilities 12-6
Utilities 12-4
Utilities 12-2
Utilities 12-4
Executive 5-31
Error Logging 5-17
PDP-11 MACR0-11 6-12

Error Logging 4-1
Error Logging 5-17 to 5-18
Error Logging 5-19
Error Logging 5-19
Error Logging 5-19
Batch and Queue 2-6
Batch and Queue 2-21
Batch and Queue 2-4
Batch and Queue 2-20
Task Builder 10-9
Utilities 12-2
Utilities· 4-6
Utilities 10-10
Utilities 3-11
Command Language 5-6
Introduction 4-12
Introduction 4-13
Command Language 6-2, 6-21 to
e:_'l'l
v

COBOL-81
compiler
building
%COD

.JL.

o_t:::
:7-v

\..V

n_.,
:7- I

Release Notes 1-37
Error Logging 5-19
Index-37

MASTER INDEX
COD field in ALL block
offset
summary
XB$ALL code
COD field in DAT block
off set
summary
XB$DAT code
COD field in KEY block
off set
summary
XB$KEY code
COD field in PRO block
offset
summary
XB$PRO code
COD field in SUM block
offset
summary
XB$SUM code
Code
access
allocation
relocation
scope
type
Code and mask symbol
declaring
ALL block
DAT block
FAB
KEY block
NAM block
PRO block
RAB
SUM block
XAB
value
ALL block
DAT block
FAB
KEY block
NAM block
PRO block
RAB
SUM block
Code sharing
Code symbol
See Code and mask symbol
Coding standard
CO LOG
stopping
using SHUTUP
/COLOG keyword
SET command
Colon (:)
DCL
%COM
COM symbolic argument
Comma (,)
See also ODL operator
COMMAN symbol
Command

RMS-11 Macros 6-2
RMS-11 Macros 6-10
RMS-11 Macros 6-14
RMS-11 Macros 6-17
RMS-11 Macros 6-67
RMS-11 Macros 6-70
RMS-11 Macros 6-108
RMS-11 Macros 6-110
RMS-11 Macros 6-145
RMS-11 Macros 6-147
Task Builder 2-4 to 2-5
Task Builder 2-4 to 2-5
Task Builder 2-4
Task Builder 2-4, 2-7
Task Builder 2-5, 2-7
RMS-11 Macros C-3
RMS-11 Macros C-3
RMS-11 Macros C-1
RMS-11 Macros C-3
RMS-11 Macros C-2
RMS-11 Macros C-3
RMS-11 Macros C-2
RMS-11 Macros C-3
RMS-11 Macros C-4

to C-4
to C-4
to C-4
to C-4
to C-4

RMS-11 Macros 6-2
RMS-11 Macros 6-14
RMS-11 Macros 6-22
RMS-11 Macros 6-67
RMS-11 Macros 6-94
RMS-11 Macros 6-108
RMS-11 Macros 6-115
RMS-11 Macros 6-145
PDP-11 MACR0-11 6-45
PDP-11 MACR0-11 E-1 to E-16
System Management 8-4
MCR Operations 3-174
Command Language 3-16
Command Language 1-9
Error Logging 5-20
PDP-11 MACR0-11 6-11
ODT 2-4
MCR Operations 4-17
Introduction 1-1, 1-4, 2-4,
Gloss-7

See also individual command
entries
See also RMSDES
Index-38

MASTER INDEX
Command (Cont.)
correcting mistake
DCL
adding to
definition
deleting from
modifying
tables
file
indirect
interaction with indirect
level of indirection
with ODL
keypad editing
See also Function
library
default file type for
line
CLI
displaying
comment in
compressing
form
format
Indirect
interpreter
See CL!
multi-line input
option input
output file interpretation
parsing
passing
processing
from another file
parallel
quotation marks in
substitution in
controlling format of
terminating
terminating character
to build a task
UFD convention
VMR
comment in
line editing
MCR
summary
testing in UETP
multiple
for Console Logger
name
VMR
nokeypad editing
ODT
at sign (@)
B

cancel
circumflex ( "')

, .... ..,
System Management .i."'--1, 12-9 to
12-11
System Management 12-7, 12-9 to
12-11
System Management 12-12
System Management 12-12
System Management 12-6 to 12-12,
12-17 to 12-20, 12-46 to
12-47

Task Builder 1-5
Task Builder 1-5 to 1-6
Task Builder 1-7
Task Builder 3-29
EDT Editor 1-9
MCR Operations 4-19
MCR Operations 4-20
MCR Operations 1-1
MCR Operations 4-3
MCR Operations 1-4
Task Builder 1-8
MCR Operations 1-2
Task Builder 1-2
MCR Operations 2-3
MCR Operations 4-21
Task Builder 1-3
Task Builder 1-3
Task Builder 1-3
MCR Operations 1-2, 1-5, 4-46
MCR Operations 3-152
MCR Operations 4-28
MCR Operations 3-197
MCR Operations 1-2
MCR Operations 4-17
MCR Operations 4-18
MCR Operations 1-2
Task Builder 1-3, 1-5 to 1-6
Task Builder 1-2
Task Builder 1-9
System Management 10-4
System Management 10-5
EDT Editor 1-9, 2-20, 7-1
MCR Operations 1-5
System Management 9-3
System Management 3-6
System Management 10-4
EDT Editor 1-10, 2-36, 8-1, 8-5
ODT 2-4
ODT 2-5, 4-4
ODT 2-8, 3-1 to 3-2
ODT 2-8
ODT 2-5, 4-4
ODT 2-8

D
E

equal sign

EDT Editor 5-47

(=)

ODT 2-8, 6-3
ODT 2-8, 7-2
ODT 2-9, 6-4
Index-39

MASTER INDEX
Command
ODT (Cont.)
G
I

K
L

line feed
N

0
p
R

relative branch location (>)
return from calculated
location (<)
return key

s
u

underscore ( )

w
x

parameter
VMR
procedure
DIGITAL-supplied
invoking
universal library of
processing
range specification
RMSDES utility
sequence
comments in
simple
structure of nokeypad
truncating
use of
VMR
summary
Command dispatcher
Command file
creating
default
EDTINI.EDT
startup
Command file qualifier
DCL
MCR
Command format
MAC task
Command function
Command language
kinds of
Command Language Manual
technical changes
Command level
list of prompts
returning to
Command line
DCL format
DCL qualifier
EDT
example
format
ignoring 01anks and tabs
MCR format
MCR qualifier

ODT 2-9, 3-2
ODT 2-9
ODT 2-9, 7-1
ODT 2-9, 6-4
ODT 2-5, 4-4
ODT 2-10, 6-3
ODT 2-10, 7-1
ODT 2-10, 3-2 to 3-3
ODT 2-10
ODT 2-6
ODT 2-6
ODT 2-5, 4-2
ODT 2-10, 3-3
ODT 2-11
ODT 2-5, 4-5
ODT 2-11
ODT 2-11, 6-3
ODT 1-4, 2-11
ODT 2-11
MCR Operations 1-2
System Management 10-4
MCR Operations 4-20
MCR Operations 4-21
MCR Operations 4-19
MCR Operations 1-5
EDT Editor 6-7
RMS-11 Utilities 2-1, 2-4
Task Builder 1-8
Task Builder 1-2
EDT Editor 8-4
Introduction 1-12
EDT Editor 1-9
System Management 10-5
Introduction Gloss-7
EDT Editor 4-9
EDT Editor 4-9
EDT Editor 4-9
EDT Editor 1-5, 4-1
EDT Editor 1-5, 4-1
EDT Editor 4-2
EDT Editor 4-5
PDP-11 MACR0-11 8-4 to 8-7
EDT Editor 2-20, 5-47
EDT Editor 2-2
Release Notes 1-7
EDT Editor 2-3
EDT Editor 5-54
EDT Editor 2-2, 4-1
EDT Editor 4-2
EDT Editor 4-2 to 4-3
EDT Editor 2-2
EDT Editor 4-7
Utilities 1-4
IiO Operations 7-8
EDT Editor 4-4
EDT Editor 4-5 to 4-6

Index-40

MASTER INDEX
Command line {Cont.)
RECOVER qualifier
Command Line Interpreter
See CLI
COMMAND LINE INTERPRETER command
Command line interpreter switch
Command line parsing
error
Command line processing
data flow during
COMMAND qualifier
DCL
MCR
Command qualifier
Command semantic parser
Command string
RMSBCK utility
RMSCNV utility
RMSDEF utility
RMSDSP utility
RMSIFL utility
checking
RMSRST utility
Command String Interpreter
See CSI
Command String Syntax Analyzer
Command summary
Command utility
messages
RMSBCK utility
RMSCNV utility
RMSDSP utility
RMS I FL utility
RMSRST utility
Comment
block directive
card reader format
DCL
delimiter
field
in command sequence
in line
indirect command file with
VMR
COMMENTS argument
Commercial instruction set
Commercial-at sign (@)
Common
See also Region
allocation diagram
assigning references
building a linking task
building and linking to
building and linking to a
device
device
See also Device common
establishing offset in
in MACR0-11
building and linking to
building and linking to a
See Region
:

~ -

.LllO':ll..Q.J..J..LlJ';:I

.Lil

'r"\t:"' v

, , ...
l\i:)l\.-.J..J.l'I

EDT Editor 3-1
MCR Operations 3-35
Crash Dump Analyzer 2-3
I/O Operations 6-21
I/O Operations 6-1
I/O Operations 6-2
EDT Editor 4-3
EDT Editor 4-6
Introduction 2-3, Gloss-7,
Gloss-27
I/O Operations 6-19 to 6-20
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Utilities 6-2
Utilities 4-3
Utilities A-5
Utilities 5-2
Utilities 3-2
Utilities 3-9
Utilities 7-2

to 6-3
to 4-4
to 5-3
to 3-3
to 7-3

I/O Operations 6-18 to 6-19
Batch and Queue 4-1
RMS-11 Utilities C-1
RMS-11 Utilities 6-1
RMS-11 Utilities 4-1
RMS-11 Utilities 5-1
RMS-11 Utilities 3-1
RMS-11 Utilities 7-1
MCR Operations 1-4
PDP-11 MACR0-11 6-18
PDP-11 MACR0-11 6-19
Command Language 1-11
PDP-11 MACR0-11 3-2
PDP-11 MACR0-11 2-1, 2-4 to 2-5
Task Builder 1-8
Task Builder 1-8
MCR Operations 4-3
System Management 10-5
PDP-11 MACR0-11 8-11
PDP-11 MACR0-11 C-3 to C-4
Command Language 3-16
Task Builder 5-1, 5-26 to 5-31
Task Builder 5-20
Task Builder 5-23
Task Builder 5-21 to 5-22
Task Builder 5-14, 5-17 to 5-18
Task Builder 5-26 to 5-31
Task Builder 5-26 to 5-31
Task Builder 5-28
Task Builder 5-17 to 5-18
m--L.
.LQl:>I\.

Index-41

n ... : , ....:1.-DU .L .LU'C 1.

c: ....
:.;,-,c.

- c - ")

.....
l..V

J-.,;,,

c _"'.In
..J-,v

MASTER INDEX
Common (Cont.)
installing in RSX-llM-PLUS
linking to region
loading
map
partition
PSECT
building a linking task
region
resident
declaring
name block data
specifying a
typical
Common block
displaying
information
fixing
installing
loading
Common block attached
determining region ID of
Common Block Directory
See CBD
Common block directory dump
Common event flag
reading
COMMON option
Communications products
DECnet
SYSGEN support
$COMPARE macro
example
/COMPARE qualifier
BRU utility
COMPAREDATA YES/NO command
IOX

Compatibility
file specification
Compilation path
RSX-llM
Compile
Compiled program
fixed line number
Compiler
See also High-level language
BASIC-PLUS-2

Task Builder 5-2 to 5-3, 5-20·
Task Builder 5-14
System Management 10-20
Task Builder 5-19
System Management 14-1
Task Builder 5-23
Task Builder 2-19
Task Builder 5-1 to 5-2
Task Builder 11-11, ll-28
Task Builder B-8
Task Builder 10-9
Task Builder 5-2
System Generation
System Generation
System Generation
System Generation

(llS)
(llS)
(llS)
(llS)

2-22
2-9
2-9
2-10

Executive 5-16
Crash Dump Analyzer 3-36
Executive 5-127
Task Builder 11-11 to 11-12
System Generation (llM) 4-33
System Generation (llM) 4-33
RMS-11 Macros 2-16
RMS-11 Macros 7-3, 7-7, 7-11,
7-15
Utilities 7-14
System Management 4-27
RMS-11 User's Guide A-2, A-4
Error Logging 4-11
Command Language 6-1
EDT Editor 6-3
Introduction 4-3, Gloss-7
Command Language 6-2, 6-12 to
6-13

COBOL-81
building
COBOL/Cll
CORAL 66
F4P
F77
FOR
FORTRAN IV
FORTRAN IV-PLUS
FORTRAN-77

Command Language 6-2,
6-27, 9-6
'l "1
Release Notes ..1 -_,I
Command Language 6-2,
6-32, 9-7
Command Language 6-2,
6-39, 9-9
Command Language 6-2,
6-20, 9-16
Command Language 6-2,
6-20, 9-16
Command Language 6-2,
6-20, 9-16
Command Language 6-2,
6-20, 9-16
Command Language 6-2,
6-20, 9-16
Command Language 6-13
Index-42

6-21 to
6-27 to
6-32 to
6-13 to
6-13 to
6-13 to
6-13 to
6-13 to

to 6-20

MASTER INDEX
Compiler (Cont.)
PDP-11 COBOL
Compiler conditional
literal declaration
Complement
See One's or Two's complement
Completion
handler
return macro
declaring
symbol
declaring
Completion status
See STS field in FAB
See STS field in RAB
See STV field in FAB
See STV field in RAB
Complex relocatable expression
Complex relocation

entry
operation codes
Compression
RMSIFL utility
Computational function
CON symbolic argument
Concatenated object module
using to reduce overhead
CONCATENATION CHARACTER command
EDI editor
Concatenation indicator
Concurrent I/O activity
optional logging
Conditional assembly
block
directive
case sensitivity control
nested
immediate
Conditional assembly symbol
LD$xx
Conditional declaration
Conditional function
Conditional routine
CONDITIONALS argument
<CONFIG> symbol
Configuration
See also Autoconf igure
hardware
of devices in !OX
RMS-11 utility
saved host
saved peripheral
software
CONFIGURE command
!OX

Connect directive
$CONNECT macro
CONNECT operation
require.merit
block stream
$CONNECT macro
I/O buffer requirement

BDB

Command Language 6-2, 6-27 to
6-32, 9-7
Error Logging 4-12

RMS-11 Macros 2-17
RMS-11 Macros C-2
RMS-11 Macros C-3

PDP-11 MACR0-11 3-18
PDP-11 MACR0-11 4-1
Task Builder A-22
Task Builder A-23
Task Builder A-22
RMS-11 User's Guide 5-10, 5-16,
6-7, 6-9
RMS-11 Utilities 3-11
Error Logging 5-20
PDP-11 MACR0-11 6-42
Task Builder F-4
Utilities 2-30
PDP-11 MACR0-11 3-3
Error Logging 4-23
PDP-11 MACR0-11 6-50 to 6-54,
6-56
PDP-11 MACR0-11 7-3
PDP-11 MACR0-11 6-50 to 6-56
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 6-52
PDP-11 MACR0-11 6-56
Writing I/O Driver 3-5
Error Logging 5-30
Error Logging 5-17
Writing I/O Driver 5-1
PDP-11 MACR0-11 8-11
MCR Operations 4-13
System Generation (llS)
System Management 4-28
Release Notes 2-20
System Generation (llM)
System Generation (llM)
System Generation {llS)
System Management 4-28
Executive 5-31
RMS-11 Macros 5-6
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 2-8
RMS-11 Macros 4-13
RMS-11 Macros 5-6
RMS-11 Macros 2-7
Index-43

1-2
4-7
4-7
1-2

MASTER INDEX
CONNECT operation (Cont.)
indexed files
!RAB requirement
key buffer requirement
record stream
relative files
sequential files
Connect to Interrupt Vector
directive
Connecting and passing status
Console
driver
loading of
log assignment
displaying
logging
command
descriptions of
general format of
summary of
multiple commands
session
example
starting
stopping
output
device
active Console Logger
as a pseudo device
as affected by REDIRECT
control of I/O
determining
MCR REDIRECT restriction
redirecting
redirecting with MCR
REDIRECT
status of
device I/O
controlled by Console
Logger
task
communication with!
installed by SYSGEN
selecting in SYSGEN
terminal
attaching to
detaching from
disabling
displaying assignment
reading from
reassigning
task communication to
writing to
Console Logger
aborting restriction
communication with
communication with a task
console output device affect on
controlling I/O to CO:
effect when active
error messages from
Console switch register
Constant register
indicator
Container f le
RMSBCK ut lity
RMSDSP ut lity

RMS-11 User's Guide 7-2
RMS-11 Macros 2-5
RMS-11 Macros 2-6
RMS-11 Macros 4-8
RMS-11 User's Guide 4-7
RMS-11 User's Guide 3-7
Executive 5-18
Executive 4-3
System Management 3-2
System Management 3-4
System Management 3-3
System Management 3-4
System Management 3-3
System Management 3-6
System Management 3-9
System Management 3-4
System Management 3-5
System Management 3-1
System Management 3-1
System Management 3-1
System Management 3-1
System Management 3-1
System Management 3-7
System Management 3-8
System Management 3-7
System Management 3-8
System Management 3-7
System Management 3-2
System Management 3-1
System Management 3-2
System Management 3-2
System Management 3-2
System Management 3-3
System Management 3-3
System Management 3-5
System Management 3-4
System Management 3-3
System Management 3-5
System Management 3-2
System Management 3-2
System Management 3-1
System Management 3-5
System Management 3-2
System Management 3-2
System Management 3-1
System Management 3-2
System Management 3-1
System Management 3-11 to 3-13
Executive 5-93
ODT 2-6, 5-3, 7-3
ODT 7-3
RMS-11 Utilities 6-1, 6-3, 6-7
RMS-11 Utilities 5-1, 5-3 to 5-4

Index-44

MASTER INDEX
Container file
RMSDSP utility (Cont.)
detailed display
DMC!DC!IJ'I

..~.,...,,~..,""

n+.; 1 ; +.u
u \. • • • "'""Z

CONTENTS argument
Contents of location
See Location
Context
block
readable block
writable block
block stream
CONNECT operation
current record
DELETE operation
DISCONNECT operiation
FIND operation
FLUSH operation
GET operation
next record
PUT operation
record stream
REWIND operation
TRUNCATE operation
UPDATE operation

RMS-11 Utilities 5-4
RMS-11
PDP-11 MACR0-11 8-11

7-9 to 7-10

RMS-11 Introduction 4-5
RMS-11 User's Guide 1-9, 1-15
RMS-11 Introduction 4-7
RMS-11 Introduction 4-7
RMS-11 Introduction 4-7
RMS-11 Macros 4-12
RMS-11 User's Guide 3-7, 4-7, 7-2
RMS-11 Introduction 4-5
RMS-11 User's Guide 1-9, 1-15
RMS-11 User's Guide 4-7, 7-3
RMS-11 User's Guide 3-7, 4-8
RMS-11 User's Guide 3-8, 4-8, 7-3
RMS-11 User's Guide 3-9, 4-10,
7-5
RMS-11 User's Guide 3-10, 4-11,
7-5
RMS-11 Introduction 4-5
RMS-11 User's Guide 1-9, 1-15
RMS-11 User's Guide 3-11, 4-11,.
7-6
RMS-11 Macros 4-3
RMS-11 Us.er' s Guide 3-11, 4-12,
7-6
RMS-11 User's Guide 3-12
RMS-11 User's Guide 3-13, 4-12,
7-6
RMS-11 User's Guide 1-19, 8-12

Contiguity
See also FB$CTG mask in FOP field
See also XB$CTG mask in AOP field
indexed files
RMS-11 User's Guide 6-13
RMS-11 User's Guide 4-4
relative files
RMSCNV utility
RMS-11 Utilities 4-2
RMS-11 Utilities A-15
RMSDEF utility
RMSIFL utility
RMS-11 Utilities 3-1, 3-6
RMS-11 User's Guide 3-5
sequential files
virtual
RMS-11 Introduction 2-3
CONTIGUOUS
RMSDES utility
area section
RMS-11 Utilities 2-46
file section
RMS-11 Utilities 2-35
Contiguous
Introduction Gloss-7
Contiguous file
Introduction 4-8
Contiguous line range
EDT Editor 6-10
RMS-11 User's Guide 5-5
Continuation bucket
Continuation line
I/O Operations 6-5
See also Line continuation
CLI
System Management 11-8
Command Language 7-21 to 7-22,
CONTINUE command
9-8
CONTINUE/DEBUG command
ODT 1-6
IAS
Continuing
ODT 3-2
program execution
Control
IOX command
System Management 4-3
category
T"'\nm

1'1.... J.

.a...-L, -

l.dU.1.~

revector status code
Control and Status Register
See CSR

System Management 5-2

Index-45

MASTER INDEX
Control block
ALL
chaining
DAT
declaring
examining
FAB
field
See Field
initializing
KEY
NAM
PRO
RAB
setting up
SUM
Control character
card reader
list of
OPEN command
terminal
Control command
Control file
universal library
Control File Language
definition
See also CFL
Control File Language compiler
See CFL
Control file module
architecture
compilation path
CPU level module
data subpacket
definition
device ID subpacket
device operation subpacket
DEVSMl
DE VU DA
Dispatch
dispatching
DMPALL
DSPlMl
DSP2Ml
DSP4Ml
DSP5Ml
DSP6Ml
DSP7Ml
Ell34
Ell44
Ell60
Ell 7X
Ell XX
ERR ORM
EUNKWN
FINLMl
FMlNMl
FMlWMl
FM2CM1
FM3CM1
FM4NM1
FM4WM1

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Introduction 4-7
User's Guide 1-14, 2-2
Macros 1-2
Introduction 4-8
Macros 2-12
Introduction 4-8
Macros 2-8
Macros 2-15
Introduction 4-8

RMS-11 Macros 2-8
RMS-11 Introduction 4-8
RMS-11 Introduction 4-8
RMS-11 Introduction 4-8
RMS-11 Introduction 4-8
RMS-11 Macros 2-10
RMS-11 Introduction 4-8
MCR Operations 2-14
I/O Drivers 11-8
I/O Drivers 11-9
MCR Operations 3-135
I/O Drivers 2-27, 2-33, 3-20,
3-25
Introduction 1-4, 1-17
Error Logging 5-1
Error Logging 4-2
Error Logging 1-3
Error Logging 4-1 to 4-2
Error Logging 4-11
Error Logging 4-7
Error Logging 4-3
Error Logging 4-1
Error Logging 4-3
Error Logging 4-3
Error Logging 4-7
Error Logging 4-7
Error Logging 4-3
Error Logging 4-1
Error Logging 4-8
Error Logging 4-4
Error Logging 4-5
Error Logging 4-5
Error Logging 4-5
Error Logging 4-6
Error Logging 4-6
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-7
Error Logging 4-8
Error Logging 4-6
Error Logging 4-6
Error Logging 4-6
Error Logging 4-6
Error Logging 4-6
Error Logging 4-6
Error Logging <:t-o
II

Index-46

MASTER INDEX
Control file module (Cont.)
FM TN Pl
format
header subpacket
INITMl
interaction of interface
literal declaration
naming conventions
Non-DIGITAL device module
options
PARSlM
PARS2M
PARS 3M
PARS EM
program control flow
PRS2AM
PRS2BM
recompilation
SELTMl
task subpacket
Control function
redefining
using
Control I/O function mask
Control information
parameter to FDOP$A
Control key
See CTRL key
Control section
name
name entry
CONTROL statement
CONTROL-C
See CTRL/C
CONTROL-0
See CTRL/O
CONTROL-Q
See CTRL/Q
CONTROL-R
See CTRL/R
CONTROL-S
See CTRL/S
CONTROL-U
See CTRL/U
CONTROL-Z
See CTRL/Z
Control-Z mode
CONTROL C command

Error Logging 4-7
Error Logging 5-1
Error Logging 4-3
Error Logging 4-7
Error Logging 4-13
Error Logging 4-12
Error Logging 4-1
Error Logging 4-1
Error Logging 4-12
Error Logging 4-4
Error Logging 4-4
Error Logging 4-4
Error Logging 4-4
Error Logging 4-iO
Error Logging 4-4
Error Logging 4-4
Error Logging 4-13
Error Logging 4-4
Error Logging 4-3
EDT Editor 5-5
EDT Editor 10-1
EDT Editor 1-7
Writing I/O Driver 4-12
I/O Operations 2-15

Task Builder A-5
Task Builder A-5
Error Logging 5-32

MCR Operations 4-32

IOX

effect on CTRL/C
CONTROL C YES/NO command
IOX

CONTROL FIELD SIZE
RMSDES utility
Controller
DECtape
device
disk
UDA50
Controller number
Convention
for using system directives
macro name
CONVERT command
Converting files

System Management 4-31
System Management 4-31
RMS-11 Utilities 2-37
I/O Drivers 6-1
Introduction 5-12, Gloss-10
I/O Drivers 5-4
Writing I/O Driver 2-14
Executive 5-5
Executive 1-5
.Command Language 4-43 to 4-49,
9-8
RMS-11 User's Guide 1-10, 1-12
Index-47

MASTER INDEX
$COP
predefined syntax element in
MML
COP macro
MML
/COPIES file qualifier
PRINT command
SET QUEUE command
Copy
big disk tape kit
on-line
stand-alone
RA60/80/81, RC25 tape kit
on-line
stand-alone
RC25 disk kit
on-line
stand-alone
RK06/07 kit
1600 bpi tape kit
on-line
stand-alone
800 bpi tape kit
on-line
stand-alone
disk kit
on-line
stand-alone
RLOl/02 kit
1600 bpi tape kit
on-1 ine
stand-alone
800 bpi tape kit
on-line
stand-alone
disk kit
on-line
stand-alone
RM02/03/05/80, RP07 tape kit
on-line
stand-alone
RP04/05/06 tape kit
on-1 ine
stand-alone
target system disk
mapped
unmapped
COPY command

DCL
EDT
COPY key
Copying
text
EDT
CORAL 66 command
CORAL command
CORIMG.SYS file
$COSEP
predefined syntax element in
MML
$COTB (Octal to binary)
Co tree
and main tree
virtual address space

System Management 12-43
System Management 12-29
Batch and Queue 2-6
Batch and Queue 2-21
System Generation (llM) 2-32
System Generation (llM) 2-6
System Generation (llM) 2-32
System Generation (llM) 2-6
System Generation (llM) 2-34
System Generation (llM) 2-9
System Generation (llM) 2-35
System Generation (llM) 2-11
System Generation (llM) 2-37
System Generation (llM) 2-14
System Generation (llM) 2-39
System Generation (llM) 2-17
System Generation (llM) 2-41
System Generation (llM) 2-20
System Generation (llM) 2-43
System Generation (llM) 2-24
System Generation (llM) 2-45
System Generation (llM) 2-28
System Generation (llM) 2-32
System Generation (llM) 2-6
System Generation (llM) 2-32
(llM) 2-6

System Generation

System Generation (llM) 6-9
System Generation (llM) 6-19
EDT Editor 2-35, 7-3
Introduction 3-7
Command Language 4-37 to 4-41,
9-8
Program Development 4-3
Introduction 2-10 to 2-11
Command Language 3-14
Introduction 2-10 to 2-11
Command Language 9-9
Command Language 6-32 to 6-39
Command Language 5-11, 5-65, 5-74
System Management 12-44
System Library 4-5
Task Builder 3-30
Task Builder 3-39
Index-48

MASTER INDEX
Cotree (Cont.)
global symbol resolution
null root
ODL statement
from allocation diagram
overlay
segment
affecting symbol search on
segment loading
Counter
location
definition
modification
COUNTER a rg um en t
/CP switch
/CPB
CPB
address in UCB
/CPR subkeyword
CLI command
CPU
CPU-level
dispatching module
DSP5Ml
/CR switch
CRF utility
LBR utility
CRll
Crash
Crash causes
halt instruction
infinite loop
processor trap
restart procedure
Crash dump
analysis
CDA support
device
PANIC
device
Crash dump analysis
See Crash dump
Crash Dump Analyzer
See CDA
Crash dump device
Crash Dump Routine
Crash notification device
CRASH statement
$CRAVL
$CRAVL symbol
use of
in fault tracing
CRAW$
CRE argument to ORG$ macro
/CRE keyword
FLA command
Create Address Window directive
CREATE command
R.MSDES utility
defining areas by default
defining areas explicitly
INDEX AREA attribute

Task Builder 3-17
Task Builder 3-30
Task Builder 3-38 to 3-39
Task Builder 3-33 to 3-34
Task Builder 10-19
Task Builder 4-2
Task Builder A-17
Task Builder A-18
PDP-11 MACR0-11 8-11
Task Builder 10-10
Crash Dump Analyzer 2-1
Writing I/O Driver 4-25
MCR Operations 3-36
Introduction 5-2, 5-4, 5-6 to 5-8,
5-10, Gloss-8
Error Logging 4-11
Error Logging 4-19
PDP-11 MACR0-11 8-7
Task Builder 10-11 to 10-13
Utilities B-1
Utilities 10-12
I/O Drivers ll-1
Introduction 1-22, Gloss-8
Crash Dump Analyzer 1-2
Crash Dump Analyzer 1-2
Crash Dump Analyzer 1-2
Crash Dump Analyzer 1-2
System Generation
System Generation
System Generation
System Generation
System Generation

(llM)
(llM)
(llM)
(llM)
(llM)

4-44
4-44
4-44
4-44
4-45

Crash Dump Analyzer 1-1
Crash Dump Analyzer 1-1
Crash Dump Analyzer 1-1
Error Logging 5-41
Crash Dump Analyzer 3-15
Writing I/O Driver 3-28
Executive 5-36 to 5-39
RMS-11 Macros 2-3
MCR Operations 3-55
Executive 5-36
Introduction 2-2, 2-5, 2-16
Command Language 4-10 to 4-11,
9-10
RMS-11 Utilities 2-7: 2-18~ 2-28~
2-31
RMS-11 Utilities 2-44
RMS-11 Utilities 2-43
RMS-11 Utilities 2-41
Index-49

MASTER INDEX
CREATE command
RMSDES utility (Cont.)
key numbering
LEVELl INDEX AREA attribute
setting attributes
with GET
Create Group Global Event Flags
$CREATE macro
CREATE operation

RMS-11 Utilities 2-38
RMS-11 Utilities 2-41
RMS-11 Utilities 2-21
RMS-11 Utilities 2-10, 2-25
Executive 5-40
RMS-11 Macros 5-9
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Macros 3-7
RMS-11 User's Guide 2-6
RMS-11 Macros 2-8
RMS-11 Macros 5-9
RMS-11 Macros 2-3
RMS-11 User's Guide A-3•
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 User's Guide B-2 to B-3
RMS-11 Macros 3-10

and shared access
BOB requirement
$CREATE macro
declaring with ORG$ macro
file versions
I/O buffer requirement
IFAB requirement
remote access
wildcard loop
Create option
ACNT
Create Region directive
CREATE/DIRECTORY command

System Management 2-2
Executive 5-42
Command Language 4-11 to 4-13,
9-10

/CREATED qualifier
BRU utility
Creating
file
macro library
object library
object module
FORTRAN IV
MACR0-11
source file
FORTRAN IV
MACR0-11
skeleton
task image

Utilities 7-14
Introduction 2-1, 2-16
Program Development 6-1 to 6-3
Program Development 6-4 to 6-6
Program Development 7-5
Program Development 3-4 to 3-6
Program Development 7-2 to 7-3
Program Development 2-12
Program Development 2-12
Program Development 1-6, 4-1 to
4-2, 7-5 to 7-6
I/O Operations 3-4, 3-7
EDT Editor 2-20, 4-1
RMS-11 User's Guide 1-10, 1-12

Creating files
See also Data file (RMSDES}
RMSDEF utility
Creation date
See also CDT field in DAT block
RMSBCK utility
CREF processor
CRF symbolic argument
CRF task
CRF utility
assembly cross-reference
data processing
error message
global cross-reference
MACR0-11/Task Builder
SEND packet
switch
symbol table file
CRGF$
.CROSS directive
Cross-reference
global
of over la id task
listing

RMS-11 Utilities A-19
RMS-11 Utilities 6-8
POP-11 MACR0-11 8-16
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 8-16
Program Development 1-8
Program Development 3-7 to 3-8
Utilities B-1
Utilities B-5
Program Development 4-5 to 4-6
Utilities B-1
Utilities B-4
Utilities B-1
Ut i1 i ties B-3
Executive 5-40
PDP-11 MACR0-11 6-21 to 6-22
Task Builder 4-12 to 4-14

Index-SO

MASTER INDEX
Cross-reference
listing {Cont.)
specifying a
Cross-reference directive
Cross-reference listing
assembly
asterisk in
controlling output in
equal sign in
generating
global
number sign in
Cross-Reference Processor
See CRF utility
/CROSS REFERENCE qualifier
$CRPKTCRRG $
/CRT keyword
SET command
VMR
/CS switch
PAT utility
SLP utility
.CSECT directive
$CSEP
predefined syntax element in
MML
CS!
changes to
numeric conversion
CSI Control block
CSI Run-time macro call
CSI$
CSI$1
CSI$2
CSR
address in SCB
altering using CNF
definition
floating
/CSR switch
BAD utility
DSC utility
CSRQ$
%CTL
/CTL
.CTRL
CTRL key
CTRL/A
CTRL/C

MCR
ODT
CTRL/C command
!OX

CTRL/D
CTRL/E
CTRL/G
CTRL/I
MCR
CTRL/J

Task Builder 10-11
PDP-11 MACR0-11 6-21 to 6-22
PDP-11 MACR0-11 3-12
Program Development 3-7 to 3-8
PDP-11 MACR0-11 8-17
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 8-17
PDP-11 MACR0-11 8-16 to 8-17
Program Development 4-5 to 4-6
PDP-11 MACR0-11 8-17
PDP=ll ~ACR0-11 8-8
Error Logging 4-23
Executive 5-42

MCR Operations 3-174
System Management 10-48
Utilities 14-6
Utilities 13-15
PDP-11 MACR0-11 3-11, 6-46
System Management 12-44
I/O Operations 6-1, 6-13 to 6-14,
6-18, 6-20 to 6-27, 6-29
Release Notes 1-34
I/O Operations 6-28
I/O Operations 6-14 to 6-17
I/O Operations 6-18
I/O Operations 6-14
I/O Operations 6-18 to 6-19
I/O Operations 6-18 to 6-21
Writing I/O Driver 4-22
System Generation (llM) 2-4
System Generation (llM) 1-4
System Generation (llM) E-3
Utilities 6-8
Utilities 8-21
Executive 5-51
Error Logging 5-21
Crash Dump Analyzer 2-2
I/O Operations 4-25, 5-6
Command Language 3-18
EDT Editor 5-53
EDT Editor 5-54
Introduction 1-3 to 1-4, 1-7 to
1-8, 1-21
Command Language 3-2, 3-12, 3-18
I/O Drivers 3-20
MCR Operations 1-3, 2-16
ODT 1-5
Program Development 1-2
System Management 4-30
EDT Editor 5-53
EDT Editor 5-53
CoJDJDand Language 3-22
Command Language 3-22
I/O Drivers 3-20
MCR Operations 2-16
I/O Drivers 3-20
Index-51

MASTER INDEX
CTRL/K
canceling operation of
description
example
MCR
CTRL/L
MCR
CTRL/M
CTRL/O
MCR
CTRL/O comm.and
CTRL/Q

MCR
CTRL/Q command
CTRL/R
MCR
CTRL/S

MCR
CTRL/S command
CTRL/T
CTRL/U

MCR
ODT
CTRL/U command
CTRL/W
CTRL/X
MCR
CTRL/Z

effect on Task Builder
MCR
RMSBCK utility
RMSCNV utility
file terminator
RMSDEF utility
RMSDES utility
RMSDSP utility
RMSIFL utility
RMSRST utility
CTX field in FAB
offset
summary
CTX field in RAB
off set
summary

EDT Editor 5-54, 10-1
Command Language 3-22
I/O Drivers 3-20
EDT Editor 10-5
EDT Editor 10-5
EDT Editor 10-6
MCR Operations 2-16
Command Language 3-22
I/O Drivers 3-20
MCR Operations 2-16
Command Language 3-22
I/O Drivers 3-20
Introduction 1-16 to 1-17
Command Language 3-18, 3-20
I/O Drivers 2-13, 3-21
MCR Operations 2-16
Program Development 3-7
EDT Editor 2-28
Introduction 1-16
Command Language 3-14, 3-19
I/O Drivers 3-21
MCR Operations 2-17
Program Development 3-7
Introduction 1-10, 2-2
Command Language 3-21
I/O Drivers 3-21
MCR Operations 2-17
EDT Editor 2-28
Introduction 1-16
Command Language 3-14, 3-19
I/O Drivers 3-21
MCR Operations 2-17
Program Development 3-7
EDT Editor 5-53
EDT Editor 5-30, 5-48
Introduction 1-10, 2-2
Command Language 3-20 to 3-21
I/O Drivers 3-21
MCR Operations 2-17
ODT 2-8
Program Development 5-3
EDT Editor 5-8
Command Language 3-21
MCR Operations 2-18
EDT Editor 2-19, 2-22, 5-8, 8-13
Introduction 1-4, 1-11, 2-2, 2-4
to 2-5, 2-9, 2-16, 5-10
Command Language 3-12, 3-18, 3-20
I/O Drivers 3-21
Task Builder 11-4
MCR Operations 2-18
RMS-11 Utilities 6-2
RMS-11 Utilities 4-4
RMS-11 Utilities 4-8
RMS-11 Utilities A-5
RMS-11 Utilities 2-2, 2-9, 2-18
RMS-11 Utilities 5-2
RMS-11 Utilities 3-2
RMS-11 Utilities 7-2
RMS-11 Macros 2-18
RMS-11 Macros 6-22
RMS-11 Macros 6-32
RMS-11 Macros 2-18
RMS-11 Macros 6-115
RMS-11 Macros 6-119

Index-52

MASTER INDEX
$CUIC
predefined syntax element in
MML
Current location
indicator (.)
Current location counter
example usage
indicator for
Current task
priority
Current-record context
See also Context
Cursor
movement in keypad editing
movement in nokeypad editing
ODT
setting range of
showing range of
using arrow keys and
Cursor control
Cursor-control key
Customizing EDT
by redefining key
CTRL/K
DEFINE KEY command
DEFINE MACRO command
SET and SHOW command
startup command file
CUT command
CUT function
example with SELECT and PASTE
reverse
CUTSEN command
$CVLOK (Page lock)
$CVRL (Virtual to real address)
$CVTUC (Upper case text)
Cylinder
See also Placement control

System Management 12-45
ODT 2-3, 2-5, 7-3
PDP-11 MACR0-11 2-2, 3-12 to 3-13,
3-15, 3-17, 6-11, 6-37, 6-43
PDP-11 MACR0-11 3-14
PDP-11 MACR0-11 3-2
Crash Dump Analyzer 3-20
RMS-11 Macros 4-3
Introduction 1-4, 2-5, Gloss-8
EDT Editor 2-9, 5-12 to 5-21
EDT Editor 2-37, 8-13
ODT 4-1
EDT Editor 9-3
EDT Editor 9-16
EDT Editor 2-12
I/O Drivers 2-39, 3-33
Command Language 3-17
EDT Editor 10-1
EDT Editor 5-54
EDT Editor 7-4
EDT Editor 7-4
EDT Editor 9-1
EDT Editor 1-5, 4-9
EDT Editor 8-7
EDT Editor 2-12, 5-33
EDT Editor 5-35
EDT Editor 5-37
EDT Editor 2-43
System Library 8-22
System Library 8-24
System Library 6-1
RMS-11 Introduction 2-1

D
D command
D error
summary
""D operator
D register
D symbolic argument
D$$BUG label
/DA switch
DAN field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
OAP (data access protocol)
See DECnet
DAPRES
remote access code
remote access support
$DAT (Date conversionj
DAT block
chaining to FAB
declaring

EDT Editor 2-40, 8-9
ODT 2-8
PDP-11 MACR0-11 2-3
PDP-11 MACR0-11 D-3
PDP-11 MACR0-11 3-5, 6-32
ODT 2-7, 5-4, 6-2
PDP-11 MACR0-11 6-41
Writing I/O Driver 3-19
Error Logging 3-5, 3-8
Task Builder 10-14
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros 5-19
Macros 5-31
Macros 6-67
Macros 5-80
Macros 6-71

RMS-11 User's Guide B-1
RMS-11 User•s Guide 8-7
System Library 6-2
RMS-11 Introduction 4-8
RMS-11 Macros 2-12 to 2-13
RMS-11 Macros 2-8
Index-53

MASTER INDEX
DAT block (Cont.)
initializing
summary
Data
segment
auto loadable
structure
building a
overlay of a
Data access protocol (DAP)
See DECnet
Data area number
See DAN field in KEY block
Data base
driver
accessing shared
changing
controlling access to shared
example
loadable
See Loadable data base
overview
resident
See Resident data base
overlay
I- and D-space task
Data block
local
.DATA directive
example
format
Data file
RMSDES utility
creating
GET command
Data format
card reader
input
Task Builder
Data integrity checking
RMSBCK utility
RMSRST utility
Data mode
Data record
Data sharing
Data space
command
access
enable
Data storage
and file organization
control in assembly language
directive
MACR0-11 definition
program section
Data storage directive
Data structure
macro definition
See also System data structure
macro definition
ACP interface
DHll terminal multiplexer
figure
interaction with driver
interrelationship
overview

RMS-11 Macros 2-9
RMS-11 Macros 6-14
Introduction 4-9, Gloss-8
Task Builder 4-7
Task Builder 2-1
Task Builder 3-19

Introduction 5-2
Writing I/O Driver 2-9
Writing I/O Driver 3-3
Writing I/O Driver 2-10
Writing I/O Driver 6-2 to 6-4
Writing I/O Driver 3-5
Task Builder B-15
Task Builder B-16
Program Development 2-8
MCR Operations 4-29
MCR Operations 4-30
MCR Operations 4-30
RMS-11 Utilities 2-3, 2-17, 2-24
RMS-11 Utilities 2-3, 2-7, 2-28
RMS-11 Utilities 2-10
I/O Drivers 11-9
Task Builder A-1
RMS-11 Utilities 6-6 to 6-7, 6-9
RMS-11 Utilities 7-6, 7-8, 7-11
MCR Operations 4-32
RMS-11 Introduction 3-7
RMS-11 User's Guide 5-2
PDP-11 MACR0-11 6-45
ODT 7-2
ODT 2-8
ODT 2-8
ODT 1-3
RMS-11 Introduction 2-1
RMS-11 User's Guide 2-5
Program Development 1-4 to 1-5
Program Development 1-4 to 1-5
Program Development 2-8
Program Development 2-8
PDP-11 MACR0-11 6-23 to 6-39
Writing I/O Driver 2-7

Writing I/O Driver D-7
Writing I/O Driver 2-7
Writing I/O Driver 2-19
Writing IiO Driver 2-5
Writing I/O Driver 2-18
Writing I/O Driver 4-1

Index-54

MASTER INDEX
Data structure (Cont.)
RLll disk
summary
user
Data transfer
BRU utility
DSC utility
FLX utility
Data type
key values
keys
and segmenting
4-byte signed integer
2-byte unsigned binary
4-byts unsigned binary
2-byte-signed integer
packed decimal
string
DATA AREA
RMSDES utility
DATA FILL
RMSDES utility
Dataset descriptor
definition of
parameter to FDOP$A
Dataset-descriptor pointer
definition of
$DATE
predefined syntax element in
MML
Date
See also DAT block
displaying
setting
system
XAB
See DAT block
Date conversion
date ($DAT)
Date format
DCL
Date switch
$DATE1
predefined syntax element in
MML
<DATE> symbol
/DB switch
SLP utility
DBMS-11
DBS field in KEY block
DISPLAY operation
off set
OPEN operation
summary
$$DBTS
reserved PSECT name
/DC switch
DMP utility
/DCB
DCB
description
relationship of
with I/O control blocks

Writing I/O Driver 2-8
Writing I/O Driver 2-20
Executive 3-10
Utilities 7-26
Utilities 8-24
Utilities 4-1
RMS-11 Introduction 3-7
RMS-11 User's Guide 6-3
RMS-11 User's Guide 6-7
RMS-11 User's Guide 6-4
RMS-11 User's Guide 6-5
RMS=ll User's Guide 6-5
RMS-11 User's Guide 6-4
RMS-11 User's Guide 6-6
RMS-11 User's Guide 6-3
RMS-11 Utilities 2-40
RMS-11 Utilities 2-40
I/O Operations 1-10, 2-27 to 2-28,
3-15
I/O Operations 1-11
I/O Operations 2-13
I/O Operations 1-11
System Management 12-42
MCR Operations 3-217
System Management 10-72
MCR Operations 3-217
System Management 10-72
Command Language 2-1, 8-1 to 8-2,
9-31, 9-37

System Library 6-2
Command Language 1-8
Error Logging 3-5, 3-8
System Management 12-42
MCR Operations 4-13
Utilities 13-15
System Generation (llM) 4-22
RMS-11 Macros 5-31
RMS-11 Macros 6-68
RMS-11 Macros 5-80
RMS-11 Macros 6-72
Task Builder E-2
Utilities 11-5
Crash Dump Analyzer 2-2
Writing I/O Driver 4-7
Writing I/O Driver 2-6
Index-55

MASTER INDEX
DCB (Cont.)
required field
role of
in I/O data structure
with ACP
DCB field
D.DSP
D.LNK
D.MSK
D.NAM
D.PCB
D.UCB
D.UCBL
D.UNIT
DCBDF$
DCL

adding commands
ANSI file name
colon (:)
command
definition
issuing
tables
command line
comments
dates
DECnet
definition
deleting commands
equal sign (=)
errors
installation
line continuation
linking
debugger
ODT
ODTID
supervisor libraries
mapping to MCR
master command table
modifying commands
number
decimal
octal
operations
parameter
parser table
qualifier
Restriction as Catch-All Task
RSX-llM/M-PLUS

Writing I/O Driver 3-6
Writing I/O Driver 2-20
Writing I/O Driver D-9
Writing I/O Driver 3-6, 4-10,
4-14
Writing I/O Driver 3-6, 3-8, 4-8
Writing I/O Driver 3-6, 4-11
Writing I/O Driver 3-6, 4-9
Writing I/O Driver 3-6, 4-14
Writing I/O Driver 3-6, 3-8, 4-8
Writing I/O Driver 3-6, 4-9
Writing I/O Driver 3-6, 4-9
Crash Dump Analyzer B-6
EDT Editor 2-2, 4-2
Introduction 1-5, 1-8, 4-1, 5-11,
Gloss-8
System Generation (llM) 4-60
Command Language 1-1 to 1-2, B-1
Program Development 1-1 to 1-3
System Management 7-1, 7-12 to
7-13, 11-2, 11-5, 11-8, 12-1
RMS-11 User's Guide B-2
System Management 12-7, 12-9 to
12-11
Command Language 1-10
Command Language 1-9
System Management 12-9
MCR Operations 3-43
System Management 12-6, 12-46 to
12-47
EDT Editor 4-2 to 4-4
Command Language 1-2
Command Language 1-11
Command Language 1-8
Command Language 1-10
Batch and Queue Gloss-2
System Management 12-12
Command Language 1-9
Command Language 1-13
System Management 12-1 to 12-3
Command Language 1-11, 3-12
ODT 8-1
ODT 1-3
ODT 1-4
ODT 1-4
System Management 12-20 to 12-25,
12-34
System Management 12-6 to 12-12,
12-17 to 12-20, 12-46 to
12-47
System Management 12-12
Command Language 1-8
Command Language 1-8
System Management 12-4 to 12-5
Command Language 1-8
System Management 12-6 to 12-12,
12-17 to 12-20, 12-46 to
12-47
Command Language 1-3 to 1-5
Release Notes 1-28
Command Language 1-19
Index-56

MASTER INDEX
DCL (Cont.)
short forms
source module
updating
SYSGEN
taskbuilding
terminal
specifying
translator table

Command Language 1-7 to 1-8, 9-1
Release Notes 1-46
System Management 12-2
System Management 12-4
MCR Operations 3-175
System Management 12-6 to 12-12,
12-17 to 12-20, 12-46 to
12-47
Command Language 1-9

underscore ( )
using
suppress messages from QMG
VAXiVMS
DCL command
command line format
example
/DCL keyword
HELP command
SET command
/DD switch
PIP utility
.DD2CT (Decimal to binary
double-word)
$DDIV (Double-precision divide)
$DDR
predefined syntax element in
MML
DDT
See also Driver Dispatch Table
address
role of
in I/O data structure
/DE switch
FLX utility
Indirect
LBR utility
PIP utility
PRI command
RMSIFL utility
VFY utility
DEA command
$DEACB routine
DEALLOCATE command
command line format
example
DEASSIGN command
DEASSIGN/QUEUE command
DCL
DEBUG command
RSX-llM-PLUS
Debug routine
Debugger
specifying to Task Builder
Debugging
CDA
Executive stack and register
dump routine
fault code
fault isolation
fault tracing

Release Notes 1-36
Command Language 1-19
Command Language 1-7
MCR Operations 3-43
MCR Operations 3-43
MCR Operations 3-43
MCR Operations 3-65
MCR Operations 3-175
Utilities 3-16
System Library 4-1
System Library 3-3
System Management 12-43
Writing I/O Driver 3-5
Writing I/O Driver 2-20
Error Logging 3-5, 3-8
Utilities 4-7
MCR Operations 4-19
Utilities 10-13
Utilities 3-17
Batch and Queue 2-6
RMS-11 Utilities 3-7, 3-10, 3-14
Utilities 9-4
MCR Operations 3-44
Writing I/O Driver 5-6
Command Language 5-24 to 5-25,
9-10
MCR Operations 3-44
MCR Operations 3-44
MCR Operations 3-44
Command Language 5-19 to 5-21,
9-ll
Command Language 9-11
System Management 7-22
Command Language 9-11
ODT 1-5
I/O Operations 7-6 to 7-7, 7-11
ODT 8-1
Writing I/O Driver 3-20
Writing !/O Driver 3-16
Writing I/0 Driver 3-26
Writing I/O Driver 3-20 to 3-23
Writing I/O Driver 3-23 to 3-28

Index-57

MASTER INDEX
Debugging (Cont.)
introduction
MACR0-11 source file
Panic Dump routine
privileged task
session
abort
begin
end
interrupting of
resuming
supervisor mode
task
tool
See ODT
using map
XDT
Debugging aid
including a
.DEC directive
example
format
DEC Standard Editor
See EDT editor
Decimal conversion
decimal to binary ($CDTB)
decimal to binary double-word
( .DD2CT)
Decimal mode
Decimal number
packing
DECL$S
Declaration flag byte
symbol
Declare Significant Event
directive
DECLARE statement
DECnet
See also Communications
products
and CREATE operations
and ENTER operations
and ERASE operations
and file organization
and OPEN operations
and PARSE operations
and REMOVE operations
and RENAME operations
and SEARCH operations
block access
DAPRES resident library
DCL
disk-resident overlaid code
FA Ls
on different systems
file specification
default
node
quoted string
I/0 buffers
indexed files
relative files
sequential files

Program Development 1-6 to 1-7
Program Development 3-3 to 3-4
Writing I/O Driver 3-19 to 3-20
ODT 1-4
ODT 1-5
ODT 1-4, 3-1
ODT 1-4
ODT 1-5, 3-2
ODT 1-5 to 1-6
ODT 1-4
Program Development 4-9, 5-1 to
5-2, 7-7 to 7-9
Program Development 5-2, 5-8
Writing I/O Driver 3-15, 3-17 to
3-18
Writing I/O Driver 3-16
Task Builder 10-14
MCR Operations 4-30
MCR Operations 4-30
MCR Operations 4-30

System Library 4-4
System Library 4-1
MCR Operations 4-32
Introduction 3-2, Gloss-9
PDP-11 MACR0-11 6-31
Executive 5-52
Task Builder A-7
Executive 5-52
Error Logging 5-26 to 5-27
Introduction 5-3, Gloss-9
RMS-11 User's Guide 8-6 to 8-8,
B-1
RMS-11 User's Guide B-2 to B-3
RMS-11 User's Guide B-1
RMS-11 User's Guide B-2
RMS-11 User's Guide B-3
RMS-11 User's Guide B-2 to B-3
RMS-11 User's Guide B-1
RMS-11 User's Guide B-1
RMS-11 User's Guide B-1
RMS-11 User's Guide B-1
RMS-11 User's Guide B-3
RMS-11 User's Guide B-1
CollBland Language 1-10
RMS-11 User's Guide B-1
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
Index-58

User's Guide B-3
User's Guide B-2
User's Guide B-2
User's Guide B-2
User's Guide B-2
User's Guide B-3
User's Guide B-3
User's Guide B-3
User's Guide B-3

MASTER INDEX
DECnet (Cont.)
limitations on functions
node name
displayed by SHUTUP
SYSGEN support
UIC
specifying

RMS-11 User's Guide B-1
System Management 8-2
System Generation (llM) 4-33
MCR Operations 3-189
System Management 10-53

DECnet Remote Terminal Facility
See RMT
DECnet-11
down-line loading system image
installing task
DECODE statement
DECprinter
LA180
DECREMENT statement
DECscope
See VT52, VTlOO
DECtape

device-specific QIO
exercising
IOX

Files-11
initializing
recovery procedure
reversing direction
select recovery
standard QIO
status return
DECTAPE II
See TU58
DECwriter
See LA36
DECwriter II
DEF$SZ argument
<DEFAUL> symbol
Default
compilers
DEQ
device
file specification
file type
MACR0-11
TKB

operating system
DEQ
RMS-11
RMSDES utility
system library search
MACR0-11
TKB

transfer (starting) address
Default buffer
changing
Default buffer size
overriding

System Generation (llS) 4-14
System Generation (llS) 4-14
Error Logging 5-32
I/O Drivers 2-4
I/O Drivers 10-2
Error Logging 5-31
Command Language 3-1
Command Language 5-4
I/O Drivers 6-1
RMS-11 Macros 3-1, 5-20, 5-37,
5-42, 5-77, 5-88, 5-104,
5-111, 5-11 7
I/O Drivers 6-3
System Management 4-3
MCR Operations 3-76
I/O Drivers 6-6
I/O Drivers 6-7
I/O Drivers 6-7
I/O Drivers 6-2
I/O Drivers 6-4 to 6-6
RMS-11 Macros 3-1, 5-20, 5-37,
5-42, 5-77, 5-88, 5-104,
5-111, 5-117

Command Language 3-1
RMS-11 Macros C-1
MCR Operations 4-8
Introduction 1-15 to 1-16, 2-2,
3-11 to 3-12, Gloss-9
RMS-11 User's Guide 2-2
RMS-11 User's Guide 2-2
RMS-11 User's Guide 4-4
Introduction 1-15
RMS-11 User's Guide A-6, B-2
Program Development 3-5
Program Development 4-1
RMS-11 User's Guide 2-2
RMS-11 User's Guide 3-5
RMS-11 User's Guide 2-2
RMS-11 Utilities 2-21
Program Development 1-5, 1-10,
2-7
Program Development 1-11, 4-2
Program Development 4-8
1/0 Operations 2-20
1/0 Operations 2-41
I/O Operations 1-8
Index-59

MASTER INDEX
Default device
Default directory
inserting
Default extend size
establishing
volume
Default extension quan~ity
See also DEQ
RMSDEF utility
Default extension size
See DEQ field in ALL block
See DEQ field in FAB
Default file name
parameter to NMBLK$
Default file name block
definition of
initializing directly
parameter to FDOP$A
Default file name block label
parameter to NMBLK$
Default file protection
reading
word format ·
writing
Default file type
parameter to NMBLK$
Default file version number
parameter to NMBLK$
Default fill character
Default name of device
parameter to NMBLK$
Default of switch
modifying
Default print field width
Default radix
Default register definition
Default response
examples
Default string
See DNA field in FAB
Default UFD

Command Language 2-4, 4-2 to 4-3,
4-77 to 4-79, 5-72 to 5-73,
9-31
I/O Operations 4-17
I/O Operations 2-19
I/O Operations 2-8.
I/O Operations 2-8
RMS-11 Utilities A-15

I/O Operations 2-31
I/O Operations 1-10, 2-27, 2-30,
3-4, 3-15
I/O Operations 1-11
I/O Operations 2-32
I/O Operations 2-14
I/O Operations 2-31
I/O Operations 4-4 to 4-5
I/O Operations 4-5
I/O Operations 4-5
I/O Operations 4-5
I/O Operations 2-31
I/O Operations 2-31
Error Logging 5-6
I/O Operations 2-31
Task Builder F-7 to F-11
Error Logging 5-6
Error Logging 5-6
PDP-11 MACR0-11 3-14
PDP-11 MACR0-11 3-10
System Generation {llM) 3=6
Command Language 4-3, 4-77 to
4-79, 5-72, 9-31
I/O Operations 4-4
I/O Operations 4-4
I/O Operations 4-4

Default UIC
reading
writing
Deferred address mode
autodecrement
PDP-11 MACR0-11 5-5
auto increment
PDP-11 MACR0-11 5-4
index
PDP-11 MACR0-11 5-6
register
PDP-11 MACR0-11 5-3
relative
PDP-11 MACR0-11 5-9
Deferred addressing indicator
PDP-11 MACR0-11 3-2
Deferred write
RMS-11 User's Guide 2-17, 6-27
See also FB$DFW mask in FOP field
and mass insertion
RMS-11 User's Guide 6-29
indexed files
RMS-11 User's Guide 7-8
relative f il.r:?s
RMS-11 User's Guide 4-14
RMS-11 User's Guide 3-14
sequential files
DEFINE command
EDT
Introduction 2-17f Gloss-9
EDT Editor 8-10
Define key (DEFK) command
DEFINE KEY command
EDT Editor 7-4, 10-2
definition
EDT Editor 1-9, 10-1
Index-60

MASTER INDEX
DEFINE KEY command (Cont.)
example
DEFINE MACRO command
Defined report string
DIGITAL
user
Defining key
description of feature
keypad editing
line editing
nokeypad editing
DEFINITIONS argument
DEFK command
DEL argument to ORG$ macro
DEL C function
DEL EOL function
/DEL file switch
QUE /MOD command
DEL L function
DEL W function
.DELAY directive
example
format
Delaying
output
DELET$
format
parameters
Delete
access
mode
DELETE & PRINT command
EDI editor
DELETE command

EDI editor
EDT
example
format
Delete Directory Entry
/DELETE file qualifier
PRINT command
SET QUEUE command
DELETE function
DELETE key
$DELETE macro
DELETE operation
and key position
and shared access
compressing records
declaring with ORG$ macro
deferred write
$DELETE macro
duplicate keys
indexed files
optimizing
relative files
Delete option
ACNT

EDT Editor 10-4
EDT Editor 7-4
Error Logging 3-20
Error Logging 3-21
EDT Editor 1-9
EDT Editor 5-54, 10-5
EDT Editor 7-4, 10-2
EDT Editor 8-10, 10-1
PDP-11 MACR0-11 8-11
EDT Editor 8-10, 10-1
RMS-11 Macros 2-3
EDT Editor 5-26
EDT Editor 2-17, 5-30
Batch and Queue 2-21
EDT Editor 2-15, 5-32
EDT Editor 2-15, 5-28
MCR Operations 4-30
MCR Operations 4-31
MCR Operations 4-31
Introduction 1-16
I/O Operations 3-38
I/O Operations 3-38
I/O Operations 3-38
MCR Operations 2-3
MCR Operations 4-32
Utilities 2-14, 2-31
EDT Editor 2-30, 7-6
Introduction 3-9 to 3-11
Command Language 4-31 to 4-34,
9-12
Utilities 2-13, 2-31
Introduction 2-12, 2-14
Batch and Queue 2-11
Batch and Queue 2-10
I/O Operations 4-16
Batch and Queue 2-6
Batch and Queue 2-21
EDT Editor 2-14, 5-25
Introduction 1-8 to 1-10, 2-2
Command Language 3-13
MCR Operations 2-15
RMS-11 Macros 5-25
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-11
RMS-11 User's Guide ·6-7
RMS-11 User's Guide 2-6
RMS-11 User's Guide 5-10, 5-16,
6-7 I 6-9
RMS-11 Macros 2-3
RMS-11 User's Guide 7-9
RMS-11 Macros 5-25
RMS-11 User's Guide 6-9
RMS-11 User's Guide 5-15, 7-3,
7-9
RMS-11 User's Guide 6-7
RMS-11 User's Guide 4-7
System Management 2-7
Index-61

MASTER INDEX
DELETE/ENTRY command
DELETE/JOB command
DELETE/PROCESSOR command
DCL
DELETE/QUEUE command
DCL
Deleting
all edits
character
line
text
EDT
word
Deletion, file marked for
See FB$MKD mask in FOP field
Delimiter
defining delimiters of entity
mixed
string
symbols used as
Delimiting character
/DENS
/DENS keyword
HOME command
INI command
MOUNT command
SAVE command
VMR
/DENS switch
DMP utility
DSC utility
Density
tape
in IOX
DENSITY command
IOX
/DENSITY qualifier
BRU utility
Density selection
magnetic tape
/DENSITY switch
FMT utility
Density s1.,vi tch
Depth
indexed files
DEQ
default
indexed files
relative files
sequential files
indexed files
relative files
sequential files
DEQ field in ALL block
CREATE operation
DISPLAY operation
off set
OPEN operation
RSTS/E
summary
DEQ field in FAB
CREATE operation

Command Language 9-12
Command Language 9-12
Command Language 9-13
System Management 7-20 to 7-22
Command Language 9-13
System Management 7-19 to 7-20
EDT Editor 5-9, 7-14, 8-15
EDT Editor 2-14, 5-26, 8-9
EDT Editor 2-15, 5-30, 7-6, 8-9
Introduction 2-12
EDT Editor 2-15, 5-28, 8-9
Introduction 2-12
Program Development 2-16
EDT Editor 9-4
EDT Editor 7-17
EDT Editor 2-30, 7-17
EDT Editor 2-30
PDP-11 MACR0-11 3-3
Crash Dump Analyzer 2-6
MCR Operations 3-71
MCR Operations 3-79
MCR Operations 3-119
System Management 10-40
Utilities 11-5
Utilities 8-14
System Management 4-32
System Management 4-32
Utilities 7-14
I/O Drivers 8-15
Utilities 5-8

Crash Dump Analyzer 2-7
RMS-11 User's Guide 5-5
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 6-26
User's Guide 4-4
User's Guide 3-5
User's Guide 6-26
User's Guide 4-4
User's Guide 3-4

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros
Macros
Macros
Macros
Macros
Macros

5-17
5-30
6-2
5-79
D-4
6-11

RMS-11 Macros 5-17

off set

RMS-11 Macros 6-22

OPEN operation
summary

RMS-11 Macros 5-74, 5-78
RMS-11 Macros 6-33
Index-62

MASTER INDEX
Description file
RMSDES utility
t;A.LT command
GET command
SAVE command
Descriptor
region
segment
window
DESELECT command

!OX

Design buff er
RMSDES utility

using
Design buffer sections (RMSDES)
See Section
Design session
RMSDES utility
resuming
Designing applications
considerations
ease of design
shared access
space
speed
when to design
Designing files
See also Indexed file
organization
See also Relative file
organization
See also Sequential file
organization
indexed
relative
sequential
Despool prototype task
Despooler
definition
Detach mode
Detach Region
$DEUMR routine
$DEV
predefined syntax element in
MML
/DEV
DEV command
VMR
DEV field in FAB
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
/DEV keyword
DISMOUNT command
TAS command
$DEVE
predefined syntax element in
MML

RMS-11 Utilities
2-24
RMS-11 Utilities
RMS-11 Utilities
RMS-11 Utilities

2-3, 2-13, 2-17,
2-10
2-10
2-27

Task Builder B-21
Task Builder B-18
Task Builder B-20 to B-21
System Management 4-34
RMS-11 Utilities 2-1
RMS-11 Utilities 2-16

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Utilities 2-1
Utilities 2-22
User's Guide 2-1
User's Guide 2-3
User's Guide 2-10
User's Guide 2-5
User's Guide 2-4' 8-1
User's Guide 2-3, 8-1
User's Guide 2-2
Introduction 3-15
User's Guide 1-10, 1-12

RMS-11 User's Guide 6-1
RMS-11 User's Guide 4-2
RMS-11 User's Guide 3-3
System Management 7-1
Batch and Queue Gloss-3
MCR Operations 4-32
Executive 5-56
Writing I/O Driver 5-7, B-3
System Management 12-42
Crash Dump Analyzer 2-2
MCR Operations 3-46
System Management 10-16
RMS-11 Macros 3-1 to 3-2
RMS-11 Macros 5-20
RMS-11 Macros 5-37
RMS-11 Macros 5-42 to 5-43
RMS-11 Macros 6-24
RMS-11 Macros 5-77
RMS-11 Macros 5-88
RMS-11 Macros 5-104
RMS-11 Macros 5-111
RMS-11 Macros 5-117 to 5-118
RMS-11 Macros 6-34
MCR Operations 3-50
MCR Operations 3-215
System Management 12-42
Index-63

MASTER INDEX
Development step
program
$DEVHD word
role of
in I/O data structure
Device

See also Medium
allocating
generic
valid device
and record formats
assignment
attaching to
attribute
list of
boo table
buffer size
specifying
characteristics
See DEV field in FAB
common
building and linking to a
controller
AD

AF
AR
CR
CT
DB
DD
OF
DK

DL
OM
DP
DR
OS
OT
DU
DX
DY
EM
GR
LA
LP
LS
MF
MM
MS
MT
pp

UD
XB
XL
XM
XP
XQ
XU

YH
YJ

Task Builder 1-1
Writing I/O Driver 2-19
Writing I/O Driver 2-20
Introduction 1-6, 1-14, 5-10 to
5-11, Gloss-10
CollDland Language 5-1, 5-4
MCR Operations 2-9
RMS-11 Introduction 2-1
MCR Operations 3-12
MCR Operations 3-12
MCR Operations 3-13
RMS-11 User's Guide 2-15
Task Builder 11-7
I/O Drivers 1-26
MCR Operations 4-52
MCR Operations 4-53
MCR Operations 3-23
MCR Operations 3-173
System Management 10-48
Task Builder 5-29
Task Builder 5-26 to 5-31
Introduction 5-12, Gloss-10
System Generation (UM) 4-66
System Generation (UM) 4-66
System Generation (UM) 4-66
System Generation (llM) 4-67
System Generation (llM) 4-67
System Generation (llM) 4-68
System Generation (llM) 4-69
System Generation (llM) 4-69
System Generation (llM) 4-69
System Generation (llM) 4-70
System Generation (UM) 4-70
System Generation (llM) 4-71
System Generation (llM) 4-72
System Generation (llM) 4-73
System Generation (UM) 4-73
System Generation (llM) 4-74
System Generation (llMj 4-76
System Generation (llM) 4-76
System Generation (llM} 4-77
System Generation (llM} 4-77
System Generation (UM) 4-78
System Generation (llM} 4-78
System Generation (llM} 4-80
System Generation (llM) 4-81
System Generation (llM) 4-82
System Generation (llM) 4-83
System Generation (llM) 4-83
System Generation (llM) 4-83
System Generation (llM} 4-84
System Generation (llM) 4-84
System Generation (llM) 4-85
System Generation (llM} 4-85
System Generation (llM} 4-86
System Generation (llM} 4-86
System Generation (llM} 4-87
System Generation (llM} 4-87
System Generation \J.J.rlJ 4-88
System Generation (llM} 4-88
System Generation (llM) 4-90
I

Index-64

._. \

MASTER INDEX
Device
controller (Cont.)
YL
YZ
deallocating
default

detaching
disk
dismounting
driver
loaded
testing
loading
pool requirements
unloading
drivers and user tasks
example
file specification
file-structured
Files-11
I/O request
redirecting
identifier
See DVI field in NAM block
information
acquiring
for command file
displaying
IOX
adding
to be tested
displaying
those tested
exercising
steps
status
during exercise
testing
removing
time of
load
OTL
logical
magnetic tape
mass-storage
name
logical
assigning
syntax
symbolic
displaying
non-file-structured
null

System Generation (llM) 4-91
system Generation (llM) 4-91
MCR Operations 3-44
Introduction 1-15
Command Language 2-4, 4-2 to 4-3,
4-77 to 4-79, 5-72 to 5-73,
9-31
I/O Drivers 1-27
RMS-11 Introduction 2-1
RMS-11 User's Guide 1-12
System Management 8-4
Introduction 5-4, Gloss-10
RMS-11 Introduction 2-1
MCR Operations 4-41
MCR Operations 3-105
MCR Operations 3-107
MCR Operations 3-223
Release Notes 1-31
System Generation (llM) 4-64
RMS-11 User's Guide A-1, A-4
Introduction 5-10 to 5-12,
Gloss-13
MCR Operations 3-114
MCR Operations 2-1
MCR Operations 3-144
System Management 10-33

MCR Operations 4-52
MCR Operations 3-46
System Management 10-16
System Management 4-28
System Management 4-28
System Management 4-2
System Management 4-58
System Management 4-34
System Management 4-55
System Generation {llS) 2-6
System Generation {llM) 4-30
I/O Drivers 1-18
RMS-11 Introduction 2-4
RMS-11 User's Guide 1-12
Introduction 1-13, 3-2, 3-8, 5-6,
5-11, Gloss-21
Introduction 1-14, 1-19, 3-5
MCR Operations 2-9
MCR Operations 2-11
MCR Operations 2-12, 3-16
MCR Operations 3-16
MCR Operations 3-46
MCR Operations 3-114
I/O Drivers 19-1
MCR Operations 2-11
Index-65

MASTER INDEX
Dev ice {Cont.)
paging
peripheral
physical
private

releasing
specifying
pseudo

console output
list
public
specifying
random access
record-oriented
redirecting
redirection
restrictions
sequential
shareable
shared
specifying
specifying parameters
status message
support on RSX-llM
supported
BAD utility
BRU utility
DSC utility
FLX utility
FMT utility
SIP
system
default
writing hardware boot block
system default
adding to account entry
changing
contained in account entry
displaying
unit- re co rd
unowned
specifying
verifying
BAD utility
write checking
specifying
Device and unit
parsing
Device attributes

System Management 10-51
Introduction 5-1, 5-5, 5-10,
Gloss-24
ColDIDand Language 5-1
CoBllland Language 5-1 to 5-3, 5-5,
5-8
Introduction 3-12
Command Language 5-9, 5-13, 5-22
to 5-25
MCR Operations 2-12
MCR Operations 3-44
MCR Operations 2-13, 3-12
Introduction 3-8, Gloss-26
System Generation (llM) C-2
Command Language 5-1 to 5-8
MCR Operations 2-10
System Management 3-1
MCR Operations 2-10
Command Language 5-9, 5-13, 5-75
MCR Operations 2-12
MCR Operations 2-13, 3-192
System Management 10-57
Command Language 5-3
Introduction 5-10 to 5-11,
Gloss-28
Command Language 5-3
MCR Operations 2-10
Command Language 5-16 to 5-18
Release Notes 1-16, 1-35
MCR Operations 3-114
Command Language 5-9, 5-13
Command Language 5-13
System Generation (llM) 4-16
System Generation (llM) 4-64
System Generation (llS) 2-18
System Generation (llM) 4-16, C-1
Utilities 6-9
Utilities 7-5
Utilities 8-4
Utilities 4-2
Utilities 5-5
System Generation (llS) 2-15
MCR Operations 2-2
MCR Operations 3-159
System Management 2-3
System Management 2-5
System Management 2-1
System Management 2-4
Command Language 5-3
RMS-11 Introduction 3-5
RMS-11 User's Guide 1-18, A-1
Command Language 5-9, 5-13
MCR Operations 2-12
MCR Operations 2-13
Utilities 6-3
MCR Operations 3-207
System Management 10-65
Tinn--·~~~-~~

.I./ V

V.t"o;;;&.Q\,.,&.\.IU'"'

A_a I

-:i;

A-1~
..,.
.., ...

Command Language 5-77 to 5-80
Index-66

MASTER INDEX
DEVICE command
RMD
Device common
loading
Device control
LUN register
Device Control Block
See DCB
Device controller dump
common interrupt address
controller request block
controller status words
controller table
Device controller switch
Device driver
displaying
information
inserting
into Executive object library
loading
unloading
without error logging
Device error logging
Device errors
error logging
hardware register contents
Device handler
See Device driver
Device I/O activity
Device independence
Device information dump
control processing flags
device characteristics word
I/O request packet
terminal status word
UCB extension
Device information table
ALTPRINTNAME field
DISPNAME field
DRIVETYPE field
MASSBUSFLAG field
MNEMONIC field
PRINTNAME field
SIZE field
Device interrupt entry point
Device interrupt vector
definition
Device module
EMLll
ERK05
ERK67
ERL12
ERM05
ERM23
ERM80
ERP07
ERP23
ERP456
ERSll
ERS34
ERXOl
ERX02
ET03i0

ET1645
ETAll

System Management 6-12
System Generation (llS) 4-13
ODT 2-7, 5-4, 6-2
Crash Dump Analyzer 3-52
Crash Dump Analyzer 3-52
Crash Dump Analyzer 3-52
Crash Dump Analyzer 3-52
Crash Dump Analyzer 3-52
Crash Dump Analyzer 2-4
System Generation (llS) 2-22
System Generation (llS) 4-5
System Generation (llS) 4-10
System Management 10-27
System Management 10-75
Error Logging 1-3
Error Logging 4-21
Error Logging 1-6
Error Logging 1-6
Error Logging 1-1
Command Language 5-8
Crash Dump Analyzer 3-39
Crash Dump Analyzer 3-39
Crash Dump Analyzer 3-38, 3-42
Crash Dump Analyzer 3-38
Crash Dump Analyzer 3-38
Error Logging 4-34
Error Logging 4-35
Error Logging 4-35
Error Logging 4-36
Error Logging 4-36
Error Logging 4-35
Error Logging 4-35
Error Logging 4-36
Writing I/O Driver 2-4
Writing I/O Driver 4-33
Writing I/O Driver 2-10
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9

Index-67

MASTER INDEX
Device module (Cont.)
ETCll
ETSll
ETSV05
ETU58
ETU77
MSCP60
MSCP80
MSCPAT
MSC PE
MSC PEN
MSCPSD
MSC PTO
Device name
logical
assigning
physical
symbolic
displaying
/DEVICE qualifier
PRINT command
SHOW QUEUE command
Device switch
Device time-out entry point
DDT conditions
Device timeout
Device-level module
adding to system
addition to device information
table
bit-to-text translation
coroutine
device data declaration
device name
error type
EUNKWN
exit
* flag
intermodule variable
local work variable
MASS BUS
module statement
Non-MASSBUS
notes
procedure statement
register definitions
subpacket statement
Devices
error logging
control file module
DEVICES command
command line format
example
keyword
/LOG
VMR
command line format
example
DEVSMl
SLP
$$DEVT
reserved PSECT name
DE VU DA
DF condition test argument
/OF switch
LBR utility

Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Command Language 5-1
System Management 10-9
I/O Drivers 1-18 to 1-20
System Management 10-16
Batch and Queue 2-6
Batch and Queue 2-15
Error Logging 3-5, 3-8
Writing I/O Driver 2-4
Writing I/O Driver 4-11
Error Logging 4-20
Error Logging 4-11
Error Logging 4-25
Error Logging 4-34
Error Logging 4-30
Error Logging 4-30
Error Logging 4-26
Error Logging 4-26
Error Logging 4-30
Error Logging 4-37
Error Logging 4-31
Error Logging 4-28
Error Logging 4-29
Error Logging 4-29
Error Logging 4-33 to 4-34
Error Logging 4-26
Error Logging 4-33 to 4-34
Error Logging 4-31
Error Logging 4-26
Error Logging 4-27
Error Logging 4-26
Error Logging 2-4
Error Logging 2-4 to 2-5
MCR Operations 3-46
MCR Operations 3-46
MCR Operations 3-46
MCR Operations 3-46
System Management 10-16
System Management 10-16
System Management 10-16
Error Logging 4-7, 4-18, 4-34,
4-36
Error Logging 4-36
Task Builder E-2
Error Logging 4-7

.... "'T"'t.

, , ..... ,,n,.... , ,
rur-ii
~~~nv-ii

Utilities 10-14
Index-68

c "\

u-J~

MASTER INDEX
/DF switch (Cont.)
PIP utility
DFIN$G argument.
DFIN$L argument
DFL field in KEY block
CREATE operation
DISPLAY operation
off set
OPEN operation
summary
/DG switch
LBR utility
DHll
remote
/DI switch
CMP utility
FLX utility
Diagnostic function
user-mode
Diagnostic run
FORTRAN IV source file
MACR0-11 source file
Dial-up line
Dialog
UETP
example
DIC
DID field in NAM block
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
DID field in NAM block field
RSTS/E
DIF condition test argument
DIFFERENCES command

Utilities 3-18
RMS-11 Macros C-1
RMS-11 Macros C-1
RMS-11 Macros 5-20
RMS-11 Macros 5-31
RMS-11 Macros 6-67
RMS-11 Macros 5-80
RMS-11 Macros 6-73
Utilities 10-15
I/O Drivers 2-40, 3-29
I/O Drivers 3-31
Utilities 12-3
Utilities 4-7
I/O Drivers 1-30
Program Development 7-3 to 7-4
Program Development 3-1 to 3-2
I/O Drivers 2-42
System Management 9-7
Executive 1-2
RMS-11 Macros 5-10, 5-21
RMS-11 Macros 5-36 to 5-37
RMS-11 Macros 5-41 to 5-42
RMS-11 Macros 6-94
RMS-11 Macros 5-73, 5-77
RMS-11 Macros 5-87
RMS-11 Macros 5-103, 5-105
RMS-11 Macros 5-109 to 5-111
RMS-11 Macros 5-116, 5-118
RMS-11 Macros 6-95
RMS-11 Macros D-4
PDP-11 MACR0-11 6-52
Command Language 4-69 to 4-75,
9-13

DIGITAL Command Language
See DCL
DIGITAL COMMAND LANGUAGE command
Digital output
bistable
multipoint
multipoint
000000. DIR file
DIR macro
MML
DIR$ macro
Direct access
See Random access
Direct assignment
operator
statement
Direction
See ADVANCE or BACKUP
Directive
assembler
summary

MCR Operations 3-43
I/O Drivers 18-18
I/O Drivers 18-17
Command Language 5-11, 5-65
System Management 12-30
I/O Drivers 1-16

PDP-11 MACR0-11 3-1 to 3-2, 3-9
PDP-11 MACR0-11 3-6 to 3-9, 3-13
Introduction Gloss-11
Program Development 1-5
PDP~ll MACRO-li B-3 to B-8

Index-69

MASTER INDEX
Directive (Cont.)
assembler function
Cancel Selective Marktime
comment block
conditional assembly
cross-reference
data storage
Executive
file control
general assembler
summary table
Get Mapping Context
immediate conditional assembly
listing control
arguments for
macro
memory management
in mapping
memory management (PLAS)
.NAME
attributes for
example of use
ODL
.END
.FCTR
introduction
.ROOT
processing
program identification
program sectioning
.PSECT
rejection
Send/Receive By Reference
symbol control
system
terminating
unconditional assembly
use
use of parentheses
version number
Directive Identification Code
See DIC
Directive Parameter Block
See DPB
Directive status code
Directive Status Word
See DSW
Directive status word
register
Directory
See UFO
default
file specification
listing
purging
wildcard context
See WDI field in NAM block
wildcard operation
See NB$WCH mask in FNB field
DIRECTORY command
DCL
formats

PDP-11 MACR0-11 6-18 to 6-22
System Generation (llM) 4-28
PDP-11 MACR0-11 6-18
PDP-11 MACR0-11 6-50 to 6-56
PDP-11 MACR0-11 6-21 to 6-22
PDP-11 MACR0-11 6-23 to 6-39
Introducf:ion 5-8
PDP-11 MACRC-11 6-57 to 6-58
PDP-11 MACR0-11 6-1 to 6-3
PDP-11 MACR0-11 6-1 to 6-3
System Generation (llM) 4-25
PDP-11 MACR0-11 6-56
PDP-11 MACR0-11 6-3 to 6-18
PDP-11 MACR0-11 6-10 to 6-12
PDP-11 MACR0-11 7-1
Executive 1-4
Task Builder 2-24
System Generation (llM) 4-24
Task Builder 3-26
Task Builder 3-27
Task Builder 3-27
Task Builder 3-22 to 3-23
Task Builder 3-22
Task Builder 3-24
Task Builder 3-22
Task Builder 3-22
Executive 1-2
PDP-11 MACR0-11 6-16 to 6-17
PDP-11 MACR0-11 6-40 to 6-48
Task Builder 3-28
Executive 1-3
System Generation (llM) 4-25
PDP-11 MACR0-11 6-48 to 6-49
System Generation (llM) 4-36
Program Development 1-9 to 1-10
PDP-11 MACR0-11 6-39
PDP-11 MACR0-11 6-53
Program Development 2-3, 2-5 to
2-6
Task Builder 3-23
PDP-11 MACR0-11 6-16 to 6-17

I/O Operations I-1 to I-12

ODT 2-6, 5-3
Introduction 5-5, 5-12, Gloss-11
RMS-11 User's Guide A-6
RMS-11 User's Guide A-1, A-4
Program Development 3-9
Program Development 3-9 to 3-10

Introduction 1-13, 3-1 to 3-3
Command Language 4-22 to 4-31,
9-14
Program Development 3-9
Introduction 3-5

Index-70

MASTER INDEX
Directory entry
creating
See ENTER operation
T

'1"1"~.; ..........

"''"" .... '""'""""':;

See also REMOVE operation
deleting wildcard
inserting
locating
replacing
See RENAME operation
Directory files
Directory Identification
parsing
Directory information
inserting
parsing
Directory operation

n ...... ___ . : ___
'V!-''C~Ql...i.Vlli:I

A_1C

-.z-..i..v

I/O Operations 4-16
I/0 Operations 4-15
I/O Operations 4-13
I/O Operations 5-2
I/0 Operations 4-10
I/0 Operations 4-16
I/O Operations 4-12
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 Macros 3-5

See also Operation
Directory operation macro
declaring
$ENTER
$PARSE
$REMOVE
$RENAME
$SEARCH
Directory processing
/DIRECTORY qualifier
BRU utility
Directory record
declare global symbol
end of global symbol
global symbol
end of
internal symbol
relocation
Directory string
reading
writing
Directory Structure
multiuser volume
single-user volume
DIRSYM.MAC
/DISABLE
keyword
CLI command
subkeyword
CLI command
Disable AST Recognition directive
Disable Checkpointing directive
.DISABLE directive
format
operating mode
$DISCONNECT macro
DISCONNECT operation
block stream
$DISCONNECT macro
indexed files
record stream
relative files
sequential files

,I"\

.i.,V

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros C-2
Macros 5-35
Macros 5-86
Macros 5-102
Macros 5-108
Macros 5-116
Macros 3-1

Utilities 7-15
Task Builder A-2
Task Builder A-11
Task Builder A-11
Task Builder A-24
Task Builder A-12
I/O Operations 4-2
I/O Operations 4-2 to 4-3
I/0 Operations 5-3
I/O Operations 5-2
Executive 4-3
MCR Operations 3-35
MCR Operations 3-37
Executive 5-53
Executive 5-55
MCR Operations 4-31
MCR Operations 4-31
MCR Operations 4-31
RMS-11 Macros 5-27
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-14
RMS-11 Macros 5-27
RMS-11 User's Guide 7-3
RMS-11 Macros 4-9
RMS-11 User's Guide 4-8
RMS-11 User's Guide 3-7

Index-71

MASTER INDEX
Disk

Introduction Gloss-11
RMS-11 Macros 3-1, 5-20, 5-37,
5-42, 5-77, 5-88, 5-104,
5-111, 5-117

address space
RCT
backing up
BRU utility
DSC utility
block
random or sequential

System Management 5-2
Utilities 7-1
Utilities 8-1
System Management 4-49

!OX

testing range display
System Management 4-50

IOX

testing range for NFS volumes
IOX

cartridge
RKOS
RK06
RK07
RL02
comparing
DSC utility
compressing
DSC utility
conventional backup
BRU utility
copying
BRU utility
DSC utility
data transfer
DSC utility
device exercise example
an RL02
IOX

System Management 4-50
I/O Drivers 5-3
I/O Drivers 5-3
I/O Drivers 5-3
I/O Drivers 5-3
Utilities 8-14
Utilities 8-3
Utilities 7-4
Utilities 7-1
Utilities 8-1
Utilities 8-25
System Management 4-9

NFS volume
IOX

displaying free space
PIP utility
VFY utility
emulator
ML-11
examining data
DMP utility
exercising
IOX

Files-11
di rectory
accessing
home block
modifying
initializing
parameter commands for
IOX

protecting
testing for
IOX

fixed
RASO
RA81
RDS!
fixed-head
RFll/RSll
RS03
RS04
fixed/removable
RC25

System Management 4-14
Utilities 3-23
Utilities 9-5
I/O Drivers 5-4
Utilities 11-1
System Management 4-2
MCR Operations 3-72
MCR Operations 3-71
MCR Operations 3-76
System Management 4-8
MCR Operations 3-123
System Management 4-63
I/O Drivers 5-4
I/O Drivers 5-4
I/O Drivers 5-4A
I/O Drivers 5-1
I/0 Drivers 5-1
IiO Drivers 5-1
I/O Drivers 5-4A
Index-72

MASTER INDEX
Di s k {Cont • )
flexible
RXOl
RX02

RX50
floppy
density
checking
formatting
FLX utility
FMT utility
full backup
BRU utility
geometry
image backup
BRU utility
initializing
BRU utility
last-track
locating bad block
BAD utility
mounting
BRU utility
MSCP
bad block handling
RCT
pack
RA60
RM02
RM03
RM05
RM80
RP02
RP03
RP04
RP05
RP06
power-fail recovery
preparation
private
public
recovering
lost block
VFY utility
space
DSC utility
removable/fixed
RC25
restoring
BRU utility
scratch
selective backup
BRU utility
space recovery
status return
swapping interval
priority
testing
selecting random testing
IOX

skipping blocks
IOX

verifying
block
VFY utility
writecheck support

I/O Dr vers 5-4
I/O Dr vers 5-4
I/O Dr vers 5-4A
MCR Operations 3-71
Utilities 4-4
Utilities 5-1
Utilities 7-3
I/O Drivers 5-2
Utilities 7-4
Utilities 7-2, 7-17
I/O Drivers 5-12
Utilities 6-1
Utilities 7-2
System Management 5-3
I/O Drivers 5-4
I/0 Drivers 5-3
I/O Drivers 5-3
I/O Drivers 5-3
I/O Drivers 5-3
I/0 Drivers 5-1
I/0 Drivers 5-1
I/O Drivers 5-3
I/O Drivers 5-3
I/O Drivers 5-3
I/O Drivers 1-39
Command Language 5-10 to 5-11
Program Development 1-12
Program Development 1-12
Utilities 9-7
Utilities 8-3
I/O Drivers 5-4A
Utilities 7-1
Command Language 5-10 to 5-11
Utilities 7-3
System Generation (llM) 6-3, 6-14
I/O Drivers 5-8 to 5-11
System Generation (llM) 4-39
System Generation (llM) 4-41
System Management 4-49
System Management 4-40
Utilities 9-1
Utilities 9-7
System Generation (llM) 4-31
Index-73

MASTER INDEX
Disk controller
UDASO
Disk device
See also Medium
drive
structure
cylinder
platter
sector
track
Disk image
Disk Save and Compress Utility
See DSC utility
Disk versus tape
Disk Volume Formatter Utility
See FMT utility
Disk-resident
overlay
loading
remote access code
overlay structure
DISMOUNT command

command line format
error message
example
keyword
/DEV
/LOCK
/USER
Dispatch module
subpacket definition
Dispatch module path
brief report
full report
no report
register report
Dispatch procedure
Dispatching
event-level
Displaced relocation
internal
Display

I/O Drivers 5-4
RMS-11 Introduction 2-1
RMS-11 Introduction 2-1
RMS-11 Introduction 2-1
RMS-11 Introduction 2-1
RMS-11 Introduction 2-1
RMS-11 Introduction 2-1
Task Builder 2-8 to 2-9
Introduction 5-12

Task Builder 3-1 to 3-2
RMS-11 User's Guide 1-13, 8-3,
8-8 to 8-9
Task Builder 4-1
RMS-11 User's Guide B-1
Task Builder 3-2
Command Language 5-9, 5-11 to
5-12, 5-38, 5-42 to 5-46,
9-14
MCR Operations 3-49
MCR Operations 3-49
MCR Operations 3-51
MCR Operations 3-51
MCR Operations 3-50
MCR Operations 3-50
MCR Operations 3-50
Error Logging 4-3, 4•11
Error Logging 4-69 to 4-71
Error Logging 4-15
Error Logging 4-15
Error Logging 4-15
Error Logging 4-15
Error Logging 4-10
Error Logging 4-16
Task Builder A-15

!OX

bad blocks list
commands as a category
continuing
with PROCEED
mode
Display information (RMSDSP)
allocation information
area information
attributes
examples
key information
$DISPLAY macro
RSTS/E
Display mode

System Management 4-25
System Management 4-3
System Management 4-48
ODT 4-1, 4-3, 4-6, 6-5
RMS-11 Utilities 5-1
RMS-11 Utilities 5-4
RMS-11 Utilities 5-4
RMS-11 Utilities 5-4
RMS-11 Utilities 5-5
RMS-11 Utilities 5-4
RMS-11 Macros 5-29
RMS-11 Macros D-4
MCR Operations 4-32

Index-74

MASTER INDEX
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Macros 3-7

DISPLAY operation
DT'\D

UiJU

R.t.YiS-11

..,.."""',..., .. .; ..,..,...,,""',....,....,_

.i.'llil;;"fU..i.~'li;UU;;,u"'-

u------ 2-8

.l"lCl ..... l.Vi:>

RMS-11 Macros 5-29
RMS-11 Macros 2-7
RMS-11 Macros 3-10
System Generation (llS)
System Generation (llS)
System Generation (llS)
System Generation (llS)
System Generation (llS)
System Generation {llS)

$DISPLAY macro
I/O buffer requirement
wildcard loop
Di splay program
building
format
RSDV05
RSDVlH
size
/DISPLAY qualifier
BRU utility
Displaying
byte location
information

2-1
4-9
2-22
1-1
1-1
1-3

Utilities 7-16

location
text
EDT
word location
Displaying attributes (RMSDES)
See Attribute
Displaying files
Distribution kit
contents
definition
directory listing
big disk
RK06/07
CL IS RC
RSXM35
RlOl/02
EXCPRV
HLPDCL
MCRSRC
RLUTIL
RMSV20
RSXM35
external volume label
guidelines for copying
inventory
media
restriction
RMS-11 V2.0 files
types
$DIV (Integer divide)
Divide routine
divide ($DIV)
double-precision divide ($DDIV)
Division operator
DJll
/DL switch
DLll
receiver interrupt enable
DMAP macro
MML
DMCll
OMO command
/DMP
DMP utility
command iine
error message
example
mode

ODT 4-2 to 4-6
Introduction 1-11, 1-16 to 1-20,
5-9
ODT 4-1
Introduction 2-5, 2-7 to 2-8
ODT 4-2 to 4-6
RMS-11 User's Guide 1-10, 1-12
System Generation (llS) 3-1
System Generation {llM) 2-1
System Generation {llM) F-1
System Generation (llM) F-39
System Generation (llM) F-29
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llS)
System Generation (llM)
Release Notes 2-17
System Generation (llM)
System Library 3-2

F-65
F-82
F-73
F-71
F-91
F-60
2-2
2-3
2-2
3-1
2-2
2-1

System Library 3-2
System Library 3-3
PDP-11 MACR0-11 3-2, 3-5
I/O Drivers 2-40, 3-30
Task Builder 10-15
I/O Drivers 2-40, 3-30
I/0 Drivers 3-33
System Management 12-31 to 12-34
I/O Drivers 12-3
MCR Operations 3-49
Crash Dump Analyzer 2-2
Command Language 5-12
Utilities 11-2
Utilities 11-12
Utilities 11-8

Index-75

MASTER INDEX
DMP utility
mode (Cont.)
device
file
switch
DMPALL
$DMUL (Double-precision multiply)
DNA field in FAB
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
summary
DNS field in FAB
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation .
PARSE operation
REMOVE operation
RENAME operation
summary
/DNS switch
FLX utility
$DNUM
predefined syntax element in

Utilities 4-7
System Management 12-40

MML
/DO switch
FLX utility
Dollar sign ($)
ODT
Dollar sign ($) symbol
$DON UM
predefined syntax element in
MML
Dormant task

Utilities 4-4
MCR Operations 3-151
Program Development 5-6 to 5-8
ODT 2-6
System Management 12-40
Introduction 5-7, Gloss-11,
Gloss-33
Command Language 7-1

DOS-11
device support
FLX utility
file copying
FLX utility
volume
deleting
FLX utility
directory listing
FLX utility
initializing
FLX utility
Dot ( • )
Double ASCII character indicator
Double quote character
Double-precision divide ($DDIV)
Double-precision multiply ($DMUL)
Double-precision routine
DOWN function
DP command
EDI editor
DPll

Utilities 11-2
Utilities 11-1
Utilities 11-3
Error Logging 4-8
System Library 3-3
RMS-11 Macros 3-3
RMS-11 Macros 5-10
RMS-11 Macros 5-36
RMS-11 Macros 5-41
RMS-11 Macros 6-24
RMS-11 Macros 5-73
RMS-11 Macros 5-87
RMS-11 Macros 5-103
RMS-11 Macros 5-109 to 5-110
RMS-11 Macros 6-35
RMS-11 Macros 3-3
RMS-11 Macros 5-10
RMS-11 Macros 5-36
RMS-11 Macros 5-41
RMS-11 Macros 6-24
RMS-11 Macros 5-73
RMS-11 Macros 5-87
RMS-11 Macros 5-103
RMS-11 Macros 5-109 to 5-110
RMS-11 Macros 6-36

Utilities 4-1
Utilities 4-3
Utilities 4-10
Utilities 4-8
Utilities 4-10
ODT 2-5, 7-3
PDP-11 MACR0-11 3-2
PDP-11 MACR0-11 6-25
System Library 3-3
System Library 3-3
System Library 3-2
EDT Editor 2-10, 5-13
Program Development 2-17
Utilities 2-14, 2-31
I/O Drivers 12-3

Index-76

MASTER INDEX
DPB

Writing I/O Driver 2-5
Executive 1-2
I/O Drivers 1-13
Writing I/O Driver 4-6
I/O Drivers 1-31
Executive 1-4
Executive 1-4
I/O Drivers 1-16
I/O Drivers 1-14

n~c::l"'r;
ni-;
nn
- - - - - _£:"
___
.:. ...

diagnostic
on stack
pointer on stack
previously defined
QIO

source of I/O packet
information
/DPR subkeyword
CLI command
DQll

Writing I/O Driver 2-9
MCR Operations 3-37
I/O Drivers 12-3
I/O Drivers 22-2
Executive 1-12
RMS-11 Introduction 2-1

DRll-K

DRGIN.MAC
Drive
Drive serial numbers
significant numbers
Driver
changing code
debugging
See Debugging
definition
device
loaded
testing
loading

Error Logging B-1
Writing I/O Driver 3-3
System Generation (llM) 1-4
Introduction 5-4, Gloss-10

pool requirements
unloading
function
loadable
See also Loadable driver
default to
partition for
task-build
multicontroller
Non-MASSBUS NPR
postinitiation service
preinitiation processing of
process-like characteristic
property
rebuilding and reincorporating
after debugging
resident
See Resident driver
role of
in RSX-llM
Software Performance Report
(SPR) support
SYSGEN support
terminal
type
user-written
debugging
Driver code
changing
example
overview
Driver data base
,., ___

i:>t:t:

T"'\-.L..-

ua '-a

MCR Operations 4-41
MCR Operations 3-105
System Management 10-27
MCR Operations 3-107
MCR Operations 3-223
System Management 10-75
Writing I/O Driver 1-2
System Generation (llM) 4-27
System Generation (llM) 4-28
System Generation (llM) 5-10
System Generation (llM) 5-9
Writing I/O Driver 2-10
Writing I/O Driver B-1
Writing I/O Driver 2-11
Writing I/O Driver 2-11
Writing I/O Driver 2-13
Writing I/O Driver 1-2
Writing I/O Dr ive.r 3-29 to 3-30

Writing I/O Driver 2-5
Writing I/O Driver 3-4
Writing I/O Driver 3-1
Introduction 4-1
System Generation (llM) 4-46
Writing I/O Driver 1-1
System Generation (llM) 4-31
MCR Operations 3-26
Writing I/O Driver 3-3
Writing I/O Driver 6-4 to 6-9
Writing I/O Driver 3-4

'------

ua::>t::

driver
Driver Dispatch Table
See DDT
Index-77

MASTER INDEX
Driver entry point
cancel I/O
device interrupt
device time-out
I/O initiator
power failure
Driver global symbol
$xxINP
$xxINT
$xxOUT
$xxTBL
DRQIO module
service performed in processing
QIO

/DRV keyword
OPEN command
DRVll
/DS switch
.DSABL directive
arguments for
/DSABLE qualifier
DSAR$S
$DSB
predefined syntax element in
MML
DSC utility
bad block information
command line
parameter
stand-alone
data transfer
device support
error message
file label
initiating
operation overview
stand-alone
command line
DSC64K.SYS
CNF and
DSCSYS.SYS
switch
on-1 ine
stand-aione
DSC64K.SYS
DSCSYS.SYS
summary
task build
terminating
using to backup target system
disk
DSC64K
deleted from kits
DSCP$S
DSC SYS
deleted from kits
DSPlMl
subpacket definition
DSPlPl
subpacket definition
DSP2Ml
subpacket definition
DSP2Pl
subpacket definition

Writing I/0 Driver 2-4,
Writing I/O Driver 2-4
Writing I/O Driver 2-4,
Writing I/O Driver 2-4,
4-10
Writing I/O Driver 2-4,
Writing
Writing
Writing
Writing

4-10
4-11
2-12,
4-11

I/0 Driver 3-5
I/O Driver 3-5
I/O Driver 3-5
I/O Driver 3-5

Writing I/O Driver 2-11
MCR Operations 3-136
I/O Drivers 22-2
PDP-11 MACR0-11 8-6
PDP-11 MACR0-11 6-19 to 6-21
PDP-11 MACR0-11 6-19 to 6-21
PDP-11 MACR0-11 8-8
Executive 5-53
System Management 12-43
Command Language 5-12
Utilities 8-9
Utilities 8-5
Utilities 8-5
Utilities 8-21
Utilities 8-24
Utilities 8-4
Utilities 8-28
Utilities 8-8
Utilities 8-5
Utilities 8-19
Utilities 8-21
Utilities 8-23
Utilities 8-24
Utilities 8-19
Utilities 8-6
Utilities 8-9
Utilities 8-24
Utilities 8-20
Utilities 8-7, 8-20
System Generation (llM) 6-14
Utilities 8-5
System Generation (llM) 6-19
Release Notes 1-23
Executive 5-55
Release Notes 1-23
Error Logging 4-4
Error Logging 4-72
Error Logging 4-72
Error Logging 4-5, 4-36, 4-50 to
4-56
Error Logging 4-73
Error Logging 4-73
Index-78

MASTER INDEX
DSP3Ml
subpacket definition
DSP3Pl
subpacket definition
DSP4Ml
subpacket definition
DSP4Pl
subpacket definition
DSP5Ml
subpacket definition
DSP5Pl
subpacket definition
DSP6Ml
subpacket definition
DSP6Pi
subpacket definition
DSP7Ml
subpacket definition
DSP7Pl
subpacket definition
DSPPAT option
DSR (Dynamic Storage Region}
See Pool
DSS/DRS
configuration
DSSll
address assignment
$DSW
DSW
DT07
device-specifc QIO
FORTRAN interface
power-fail recovery
standard QIO
status return
DTP field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
DTRG$
DUll
Dummy argument
/DUMP
Dump
See also PMD
See also Postmortem dump
See also Snapshot dump
memory
Dumping file
DMP utility
DUPll
Duplicate key

Error Logging 4-73
Error Logging 4-73
Error Logging 4-5
Error Logging 4-74
Error Logging 4-74
Error Logging 4-5, 4-19
Error Logging 4-74
Error Logging 4-74
Error Logging 4-6
Error Logging 4-74
Error Logging 4-74
Error Logging 4-6
Error Logging 4-75
Error Logging 4-75
Task Builder ll-13

I/O Drivers 18-7
I/O Drivers 18-1
I/O Drivers 18-2
Executive 1-2
Executive 1-2
I/O Drivers 23-1
I/O Drivers 23-4 to 23-6
I/O Drivers 23-8
I/O Drivers 23-6
I/O Drivers 23-2 to 23-3
I/O Drivers 23-7
RMS-11 Macros 5-18
RMS-11 Macros 5-31
RMS-11 Macros 6-67
RMS-11 Macros 5-80
RMS-11 Macros 6-74
Executive 5-56
I/O Drivers 12-3
PDP-11 MACR0-11 7-2
Crash Dump Analyzer 2-2

Task Builder D-1
Utilities ll-1
I/O Drivers 12-4
RMS-11 Introduction 3-10
RMS-11 User's Guide 6-8

See also XB$DUP mask in FLG field
EDT Editor 7-3
DUPLICATE qualifier
DUPLICATES
RMS-11 Utilities 2-40, 2-42
RMSDES utility
RMS-11 Utilities 2-44
area section
/DV switch
Utilities 9-5
VFY utility
DVB field in KEY block
RMS-11 Macros 5-31
DISPLAY operation
RMS-11 Macros 6-68
off set
RMS-11 Macros 5-80
OPEN operation
RMS-11 Macros 6-75
summary
Index-79

MASTER INDEX
$DVCER
$DVERR
DVI field in NAM block
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
$DVMSG routine
$DVTMO and $DTOER
Dynamic common region
checkpointing
shuffling
Dynamic region
Dynamic Storage Region
See Pool
DYNAMIC TABLE statement
DZll
remote

Error Logging 4-21
Error Logging 4-21
RMS-11 Macros 3-3
RMS-11 Macros 5-10, 5-21
RMS-11 Macros 5-36 to 5-37
RMS-11 Macros 5-41 to 5-42
RMS-11 Macros 6-94
RMS-11 Macros 5-73, 5-77
RMS-11 Macros 5-88
RMS-11 Macros 5-103, 5-105
RMS-11 Macros 5-109 to 5-111
RMS-11 Macros 5-116
RMS-11 Macros 6-96
Writing I/O Driver 5-8
Error Logging 4-20
System Management 14-3
System Management 14-5
Executive 5-42
Task Builder 2-20, 5-40 to 5-43
Error Logging 5-37
I/O Drivers 2-40, 3-30
I/O Drivers 3-31 to 3-32

E
E command
E error
summary
E register
Ell34
El144
El160
Ell 7X
EllXX
/EA switch
EAE
/EBC keyword
SET command
VMR
EBCDIC
Echo
/ECHO keyword
SET command
VMR
Echo option
ED command
EDI editor
EDI editor

abbreviating
strings
altering
text
AP command
asterisk {*}
BEGIN command
block mode

ODT 2-8, 6-3
PDP-11 MACR0-11 6-39
PDP-11 MACR0-11 D-3
ODT 2-7, 5-4
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Task Builder 10-16
System Generation (llM) 4-13
MCR Operations 3-176
System Management 10-48
I/O Operations G-17
Introduction 1-6; Gloss-11
Command Language 3-11
MCR Operations 3-177
System Management 10-49
MCR Operations 3-177
System Management 10-49
Utilities 2-32
Introduction 2-3
Command Language 4-20 to 4-22,
9-16
Program Development 1-3 to 1-4
Program Development 2-16
Program Development 2-16, 7-5
Program Development 2-17
Program Development 2-10
Program Development 2-14
Program Development 1-3

Index-BO

MASTER INDEX
EDI editor {Cont.)
CHANGE command
character erase
command
basic
detailed reference summary
device output
file I/O
function summary
locator
macro
set up
summary
text manipulation
text modification
commands
control mode
convention
command
terminal
correcting
source file error
task error
creating
file
deleting
characters
lines
displaying
text
DP command
ellipsis
END command
error message
command level information
fatal
file access
requiring EDI restart
ESCAPE key
example
EXIT command
closing file
creating new file
file specification
default
format
initiating (invoking)
input
initial
terminating
INSERT command
insert mode
inserting
characters
lines
line erase
LIST command
LOCATE command
locating
text
paging
PLOCATE command
positioning

Program Development 2-16, 7-5
Utilities 2-6
Utilities 2-9
Utilities 2-27
Utilities 2-26
Utilities 2-25
Utilities 2-20
Utilities 2-22
Utilities 2-25
Utilities 2-21
Utilities 2-10
Utilities 2-23 to 2-24
Utilities 2-23 to 2-24
Program Development 2-12 to 2-18
Utilities 2-3
Utilities 2-8
Utilities 2-6

Program Development 7-4 to 7-5
Program Development 4-9, 7-9
Program Development 2-9 to 2-10,
2-12, 7-2 to 7-3
Program Development 2-17
Program Development 2-17
Program Development 2-13
Program Development 2-17
Program Development 2-16
Program Development 2-14
Utilities 2-56
Utilities 2-57
Utilities 2-64
Utilities 2-60
Utilities 2-61
Program Development 2-13
Utilities 2-51
Program Development 2-10, 7-7
Program Development 2-12, 2-18,
7-5
Utilities 2-2
Utilities 2-2
Utilities 2-1
Program Development 2-9, 7-3
Program Development 2-10
Program Development 2-18, 7-7
Program Development 2-18
Program Development 2-17
Program Development 2-9, 2-18
Utilities 2-7
Program Development 2-13
Program Development 2-14, 2-18,
7-4 to 7-5, 7-7
Program Development 2-14 to 2-15,
7-4 to 7-5
Utilities 2-5
Program Development 2-15
Index-81

MASTER INDEX
EDI editor
positioning (Cont.)
line pointer
RENEW command
RETURN key

Program Development 2-14 to 2-15
Program Development 2-15
Program Development 2-9 to 2-10,
2-13, 2-18, 7-7
Utilities 2-7
Program Development 2-16
Utilities 2-3
Utilities 2-4
Utilities 2-4

slash (/)
text access mode
block mode
line-by-line mode
text file
creating
input
output
secondary
TYPE command

Utilities 2-2
Utilities 2-6
Utilities 2-6
Utilities 2-6
Program Development 2-13 to 2-14,
2-17
Utilities 2-50
Introduction 2-3, 4-3
Command Language 4-14, 4-21 to
4-22
Command Language 4-14 to 4-16,
9-15
Command Language 4-17 to 4-19
Introduction 2-2, 2-17, Gloss-12
Command Language 4-20 to 4-22,
9-15
Utilities 2-1
Command Language 4-14 to 4-16
Command Language 4-20 to 4-22,
9-16
Command Language 4-20 to 4-22,
9-16
Command Language 4-17 to 4-19,
9-15
Command Language 4-20 to 4-22,
9-16
Command Language 4-20 to 4-22,
9-16
Program Development 1-3 to 1-4

usage notes
EDIT command
EDIT/EDT command
EDIT/SLP command
Editor
EDI
EDT
K52
KED
SLP

sos
TECO
text
See also EDI editor, EDT
editor
$EDMSG (Edit message)
$EDR
predefined syntax element in
MML
EDT editor

System Library 6-5

buffer
change mode
command line
command line qualifier
controlling characteristics of
COPY command
copying text
DEC Standard Editor
DEFINE command
DELETE command
deleting text
displaying text
ending a keypad session
ending a line editing session
ending a nokeypad session
example of command line

System Management 12-44
Introduction 2-3
Program Development 1-3
Introduction 2-4, 2-17
Introduction 2-3, 2-17, Gloss-6
EDT Editor 2-2, 4-1
EDT Editor 4-1
EDT Editor 9-1
Introduction 2-10 to 2-11
Introduction 2-10 to 2-11
Command Language 4-14 to 4-16,
9-15
Introduction 2-17, Gloss-9
Introduction 2-12, 2-14
Introduction 2-12
Introduction 2-5, 2-7 to 2-8
EDT Editor 2-19, 5-9
EDT Editor 2-24, 7-8, 7-14
EDT Editor 2-44, 8-10
EDT Editor 4-1

Index-82

MASTER INDEX
EDT editor (Cont.)
EXIT command
features
FIND command
HELP command
INSERT command
journaling
line
definition of
length
number
truncation
wrapping
line mode
line nu..mber
line pointer

Introduction 2-15, 3-9
EDT Editor 1-1
Introduction 2-6
Introduction 2-4, 2-9
Introduction 2-17, Gloss-18
Introduction 2-16
Introduction 2-16
Introduction 2-9, Gloss-19
Introduction 2-16
Introduction 2-16
Introduction 2-4, Gloss-19
Introduction 2-4, 2-8
Introduction 2-5, 2-8 to 2-9,
2-13, Gloss-19
Introduction 2-13 to 2-14

minus sign (-) command
mode
change
line
MOVE command
moving text
number
line
plus sign (+) command
prompt
QUIT command
quotation marks
range

Introduction 2-17, Gloss-6
Introduction Gloss-19
Introduction 2-10 to 2-11
Introduction 2-10 to 2-11

replacing text
restriction
RESEQUENCE command
searching
text
show version number of
starting a keypad session
starting a line editing session
starting a nokeypad session
starting an editing session
SUBSTITUTE command
summary
text
displaying
truncation
line
TYPE command
wrapping
line
EDT field in DAT block
DISPLAY operation
offset
OPEN operation
summary
EDT field in NAM block
RSX-11
EDTINI .EDT
Eight-bit character option
EIS
/EL switch
ELAW$
Element
extended arithmetic
specifying
ELGF$

Introduction 2-8 to 2-9
Introduction 2-13 to 2-14
Introduction 2-3
Introduction 2-14 to 2-15
Introduction 2-13 to 2-14
Introduction 2-5 to 2-9, 2-11 to
2-14
Introduction 2-11
Release Notes 1-34
Introduction 2-9 to 2-11
Introduction 2-13
EDT Editor 9-17
EDT Editor 2-5, 5-1
EDT Editor 2-20, 7-1
EDT Editor 2-36, 8-1
EDT Editor 2-3, 4-1
Introduction 2-11 to 2-12
Introduction 2-17
Introduction 2-5, 2-7 to 2-8
Introduction 2-16
Introduction 2-4, 2-8, 2-15
Introduction 2-16
RMS-11 Macros 5-32
RMS-11 Macros 6-14
RMS-11 Macros 5-81
RMS-11 Macros 6-18
RMS-11 Macros D-4
EDT Editor 1-5, 4-9 to 4-10
System Management 10-48
System Generation (llM) 4-14
Task Builder 10-17
Executive 5-58
Task Builder 10-16
Executive 5-60

Index-83

MASTER INDEX
ELI
/AP switch
Append switch
Delete subswitch
/BA switch
Backup switch
error messages
console terminal
user terminal
file naming switch
Hard error limit switch
/HL switch
installing
privileged
startup command file
invoking
privileged
/LIM switch
Limit switch
/LOG switch
Log switch
error limiting and
New version subswitch
No limit subswitch
No limit switch
No log switch
/NOLIM switch
/NOLOG switch
non privileged command
privileged commands
/R switch
/RE switch
Reset switch
/SH switch
Show switch
/SL switch
Soft error limit switch
subswitch summary
/SW switch
switch functions
switch summary
Switch switch
Delete subswitch
New version subswi tch
using ERRLOG defaults
ELI command
reset limit
ELI show switch
QIO count
ELI switches
type
display
file naming
limiting
logging
/ELIM keyword
CLI command
FLA command
Eliminate Address Window
directive
Eliminate Group Global Event
Flags directive
Elli psis
EDI editor
Emit Status
EMLll

Error Logging 1-1
Error Logging 2-3,
Error Logging 2-3,
Error Logging 2-3,
Error Logging 2-3,
Error Logging 2-3,

2-8
2-8
2-8
2-9
2-9

Error Logging 2-11
Error Logging 2-11
Error Logging 2-8
Error Logging 2-3, 2-7
Error Logging 2-3, 2-7
Error Logging 2-1
Error Logging 2-1
Error Logging 2-2
Error Logging 2-1
Error Logging 2-3, 2-6
Error Logging 2-3, 2-6
Error Logging 2-2 to 2-5, 2-8
Error Logging 2-3 to 2-5, 2-8
Error Logging 2-2
Error Logging 2-3, 2-6
Error Logging 2-3, 2-5 to 2-6
Error Logging 2-3, 2-6
Error Logging 2-4
Error Logging 2-3, 2-6
Error Logging 2-4
Error Logging 2-2
Error Logging 2-2
Error Logging 2-4
Error Logging 2-7
Error Logging 2-4, 2-7
Error Logging 2-4, 2-10 to 2-11
Error Logging 2-2, 2-4, 2-10 to
2-11
Error Logging 2-4, 2-7
Error Logging 2-4, 2-7
Error Logging 2-3
Error Logging 2-4, 2-8
Error Logging 2-1
Error Logging 2-3
Error Logging 2-4, 2-8
Error Logging 2-4, 2-9
Error Logging 2-4, 2-9
Error Logging 2-2
Error Logging 1-4
Error Logging 2-11
Error Logging 2-2
Error Logging 2-2
Error Logging 2-2
Error Logging 2-2
MCR Operations 3-35
MCR Operations 3-55
Executive 5-58
Executive 5-60
Program Development 2-16
Executive 5-64
Error Logging 4-8
Index-84

MASTER INDEX
EMST$
/EN switch
PIP utility
QUE /DEL command
QUE /LI command
.ENABL directive
arguments for
Enable AST Recognition directive
Enable Checkpointing directive
.ENABLE directive
example
format
operating mode
/ENABLE keyword
CL! command
/ENABLE qualifier
ENABLE statement
ENAR$S
Encoding function
ENCP$S
END
range specification
END command
EDI editor
EDI editor
.END directive

format
End of global symbol directory
End of module record
End-of-block indicator
sequential files
End-of-file
indicating
sequential files
End-of-tape
logical
paper tape
End-of-volume status
magnetic tape
.ENDC directive
Ending
a keypad session
a line editing session
a nokeypad session
Ending an editing session
• ENDM di rec ti ve
.ENDR directive
.ENTER
ENTER function
correct mistake
example with COMMAND
ENTER key
$ENTER macro
RSTS/E
ENTER operation
BDB requirement
$ENTER macro
f iie versions
I/O buffer requirement
IFAB requirement
remote access

Executive 5-64
PDP-11 MACR0-11 8-6
Utilities 3-19
o .... ~,.\...
.OQ ....... .u

........ ,;,

Qji\..i

n
... f t ... ~
\,! ............

2-10

Batch and Queue 2-16
PDP-11 MACR0-11 6-19 to 6-21
PDP-11 MACR0-11 6-19 to 6-21
Executive 5-65
Executive 5-66
MCR Operations 4-32
MCR Operations 4-34
MCR Operations 4-34
MCR Operations 4-32
MCR Operations 3-36
PDP-11 MACR0-11 8-8
Error Logging 5-40
Executive 5-65
Error Logging 5-19
Executive 5-66
EDT Editor 6-8
Program Development 2-14
Utilities 2-31
PDP-11 MACR0-11 6-39
Program Development 2-7, 3-4, 4-3,
4-8
MCR Operations 4-35
Task Builder 3-22
MCR Operations 4-35
Task Builder A-11
Task Builder A-24
RMS-11 user's Guide 3-2
MCR Operations 2-18
RMS-11 user's Guide 3-2
I/O Drivers 9-8
I/O Drivers 17-5
I/O Drivers 8-15 to 8-16
PDP-11 MACR0-11 6-51
EDT Editor 2-19, 5-9
EDT Editor 2-36, 7-8, 7-14
EDT Editor 2-44, 5-21, 8-10, 8-15
EDT Editor 5-9
PDP-11 MACR0-11 7-2
PDP-11 MACR0-11 7-19
I/O Operations 4-15
EDT Editor 5-46
EDT Editor 5-47
EDT Editor 5-47
Command Language 3-12, 3-17
RMS-11 Macros 5-35
RMS-11 Macros D-4
RMS-11 Introduction 4-1
RMS-11 user's Guide 1-17
RMS-11 Macros 3-5
RMS-11 Macros 2-8
RMS-11 Macros 5-35
RMS-11 user!s Guide A-3
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 User's Guide B-1

Index-85

MASTER INDEX
ENTER operation (Cont.)
wildcard loop
Entity
BL
BPAGE
BPAR
BR
BSEN
BW

EL
[EOB] symbol
EPAGE
EPAR
ER
ESEN
EW
keypad editing
L

NL
no keypad editing
PAGE
PAR
SEN
SR
"string"

Entry point
table
zero entry points
Entry point definition, program
Entry point symbol
Entry procedure
/ENTRY qualifier
DELETE command
SHOW QUEUE command
/EO switch
RMSCNV utility
[EOB] symbol
/EOF switch
PIP utility
<EOF> symbol
$EOL
predefined syntax element in
MML

EOL function
EOS
breakpoint
EOX
breakpoint
/EP switch
LBR utility
EPKDF$
EPKDF.MAC
EQ condition test argument
Equal sign (+) operator
Equal sign (=)
DCL
Equal sign (=) command
Equal sign (=) operator
Equal sign command
~Al:' utility
/ER switch
RMSIFL utility

RMS-11 Macros 3-10
EDT Editor 8-2
EDT Edi tor 8-3
EDT Editor 8-3
EDT Editor 8-3
EDT ·Editor 8-3
EDT Editor 8-2
EDT Editor 8-2
EDT Edi tor 8-2
EDT Editor 2-4
EDT Editor 8-3
EDT Editor 8-3
EDT Edi tor 8-3
EDT Editor 8-3
EDT Editor 8-2
EDT Editor 5-16
EDT Editor 8-2
EDT Editor ,8-3
EDT Edi tor 8-2
EDT Editor 8-3
EDT Edi tor 8-3
EDT Editor 8-3
EDT Editor 8-4
EDT Editor 8-4
EDT Editor 8-3
EDT Editor 8-2
Program Development 6-5 to 6-6
Program Development 6-5, 6-9 to
6-10
Program Development 6-7
PDP-11 MACR0-11 6-39
PDP-11 MACR0-11 6-49
Error Logging 4-10
Batch and Queue 2-10
Batch and Queue 2-16
RMS-11 Utilities 4-8
EDT Editor 2-4
Utilities 3-21
MCR Operations 4-8
System Management 12-43
EDT Editor 5-18
System Generation (llM) 3-8, 4-8
System Generation {llM) 3-9, 4-8,
5-6
Utilities 10-16
Crash Dump Analyzer B-7
Error Logging 4-16
PDP-11 MACR0-11 6-51
ODT 7-2
Command Language 3-16
Command Language 1-9
ODT 2-8, 7-2
ODT 2-8
Utilities 15-17
RMS-11 Utilities 3-5 to 3-6
Index-86

MASTER INDEX
ER$-f amily symbol
declaring
value
ER$ACT
asynchronous operations
ER$CUR
DELETE operation
TRUNCATE operation
UPDATE operation
ER$DEL
FIND operation
GET operation
ER$EOF
FIND operation
GET operation
PUT operation
ER$IOP
UPDATE operation
ER$KEY
FIND operation
GET operation
ER$LIB
and resident libraries
ER$MRN
FIND operation
GET operation
ER$NEF
PUT operation
ER$RAC
PUT operation
ER$REX
PUT operation
ER$RFA
FIND operation
GET operation
ER$RFM
UPDATE operation
ER$RLK
and shared access
ER$RNF
FIND operation
GET operation
ER$RSZ
UPDATE operation
ERASE command
EDI editor
.ERASE directive
example
format
$ERASE macro
example
ERASE operation
BDB requirement
$ERASE macro
I/O buffer requirement
IFAB requirement
remote access
wildcard loop
nonselective
selective

RMS-11 Macros C-3
RMS-11 Macros A-1 to A-18
RMS-11 user's Guide 3-14, 4-14,
7-8
RMS-11 user's Guide 4-7
RMS-11 user's Guide 3-12
RMS-11 user's Guide 3-12, 4-12,
7-6
RMS-11 user's Guide 4-8' 7-3
RMS-11 user's Guide 4-11, 7-5
RMS-11 User's Guide 3-8' 4-8' 7-3
RMS-11 user's Guide 3-10, 4-10,
7-5
RMS-11 user's Guide 3-11
RMS-11 user's Guide 3-12
RMS-11 user's Guide 3-8
RMS-11 user's Guide 3-10
RMS-11 User's Guide 8-8
RMS-11 user's Guide 4-8
RMS-11 User's Guide 4-10
RMS-11 User's Guide 3-10
RMS-11 user's Guide 3-10
RMS-11 user's Guide 4-11
RMS-11 user's Guide 3-8' 7-3
RMS-11 user's Guide 3-10, 7-5
RMS-11 user's Guide 3-12
RMS-11 User's Guide 2-10
RMS-11 user's Guide 4-8, 7-3
RMS-11 user's Guide 4-10 to 4-11,
7-5
RMS-11 User's Guide 3-12
Utilities 2-32
MCR Operations 4-35
MCR Operations 4-36
MCR Operations 4-35
RMS-11 Macros 5-40
RMS-11 Macros 7-11
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Macros 3-7
RMS-11 Macros 2-8
RMS-11 Macros 5-40
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 User's Guide B-2
RMS-11 user's Guide A-4
RMS-11 Macros 3-9 to 3-10
RMS-11 Macros 3-10
RMS-11 Macros 3-11
Index-87

MASTER INDEX
ERK05
ERK67
/ERL switch
FMT utility
ERL12
ERLCFL Report Messages
ERLCNF Report Messages
fatal
information
ERLRPT Report Messages
control file
ERM05
ERM23
ERM23 device-level module
ERM80
ERP07
ERP23
ERP456
ERR macro
MML
<ERRCTL> symbol
ERRDEFINE. CFS
ERR LOG
Backup file
backup file
defaults
ELI commands
installing
privileged
log file
mandatory installation
stopping
using SHUTUP
ERRLOG Messages
ERRLOG.ULB
module addition
tuning
ERRLOGETC.ULG
<ERRNUM> symbol
Error
assembly-time
DCL
detection
exit TKB commands on
fatal
handler
handling
$ALERR entry
for autoload
for manual load
overlay
Indirect
processing
input
log file
inserting text
message
See Message
task image
Error code
ER$ACT
ER$CUR

ER$DEL

Error Logging 4-8
Error Logging 4-8
Utilities 5-8
Error Logging 4-8
Error Logging 5-44
Error Logging 3-22
Error Logging 3-22
Error Logging 3-27
Error Logging 3-28
Error Logging 3-28
Error Logging 4-8
Error Logging 4-8
Error Logging 4-37 to 4-49
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
Error Logging 4-8
System Management 12-30
MCR Operations 4-10
Error Logging 3-20
Error Logging 1-1
Error Logging 2-9
Error Logging 1-4
Error Logging 2-2
Error Logging 1-3 to 1-4
Error Logging 2-1
Error Logging 1-4
Error Logging 2-1
System Management 8-4
Error Logging 2-12
Error Logging 3-2
Error Logging 4-36
Error Logging A-1
Error Logging 4-36
MCR Operations 4-10
Introduction 1-1, 1-8, 1-12, 2-9
RMS-11 Macros 2-20
Command Language 1-13
ODT A-1
Task Builder 11-4
RMS-11 Macros 2-15
RMS-11 Macros 2-17
Task Builder 4-12
Task Builder 4-11 to 4-12
Task Builder 4-12
Task Builder 4-12
MCR Operations 4-43
ODT A-1
MCR Operations 3-212
Task Builder H-1
ODT A-2
RMS-11 User's Guide 3-7, 4-7, 7-2
RMS-11 User's Guide 3-14, 4-14,
7-8
RMS-11 User's Guide 3-12, 4-7,
4-12, 7-6
RMS-11 User~s Guide 4-8, 4-11,
7-3 I 7-5
Index-88

MASTER INDEX
Error code {Cont.)
ER$EOF
ER$IOP
ER$KEY
ER$LIB
ER$MRN
ER$NEF
ER$RAC
ER$REX
ER$RFA
ER$RFM
ER$RLK
ER$RNF
ER$RSZ
RMSIFL utility
sort routine
Error code, assembler
summary
.ERROR directive
Error. handling
.PRINT
PRINT$
Error limit
altering
IOX
device mount
logging and
notification
reset
reset counts
system reboot
Error log
command packet
control file
architecture
definition
devices
file
definition
format
naming
RPT
interface
See ELI
packet
command
creation
definition
ERR SEQ
format
packet number
definition
processing
queue
remove from queue
SMSG$
structure
unsolicited interrupt
packet number
report
context information

RMS-11 User's Guide 3-8, 3-10 to
3-11, 4-8, 4-10, 7-3, 7-5
RMS-11 Useris Guide 3-12
RMS-11 User's Guide 3-8, 3-10
RMS-11 User's Guide 8-8
RMS-11 User's Guide 4-8, 4-10
RMS-11 User's Guide 3-10
RMS-11 User's Guide 3-10
RMS-11 User's Guide 4-11
RMS-11 User's Guide 3-8, 3-10,
7-3, 7-5
RMS-11 User's Guide 3-12
RMS-11 User's Guide 2-10
RMS-11 User's Guide 4-8, 4-10 1..U
4-11, 7-3, 7-5
RMS-11 User's Guide 3-12
~-

RMS-11 Utilities D-1

PDP-11 MACR0-11 D-1 to D-5
PDP-11 MACR0-11 7-15
I/O Operations 8-2
I/O Operations 8-2
Error Logging 1-4
System Management 4-35
Error Logging 2-6
Error Logging 2-6
Error Logging 1-4
Error Logging 1-4, 2-7
Error Logging 2-6
Error Logging 2-6
Error Logging 1-4
Error Logging 4-1
Errpr Logging 4-1
Error Logging 2-4
Error Logging 1-1
Error Logging 4-2
Error Logging 5-1
Error Logging 2-8
Error Logging 1-3
Error Logging 1-1
Error Logging 1-3
Error Logging 4-23
Error Logging 4-2
Error Logging 1-3
Error Logging 1-4, 5-1, C-1
Error Logging 1-3
Error Logging 5-1
Error Logging 4-24
Error Logging 4-25
Error Logging 1-4
Error Logging 4-3
Error Logging 4-23
Error Logging 3-1
Error Logging 1-5

Index-89

MASTER INDEX
Error log (Cont.)
subpacket
definition
system
task interaction
Error log packet dump

Error Logging 4-2
Error Logging 1-2
Crash Dump Analyzer 1-6, 3-2,
3-19

Error Logger
See also ERRLOG
relationship to RCT
Error logging
device
device errors
executive directive support
executive support
device errors
device timeouts
memory errors
unexpected traps or
interrupts
interrupt timeouts
memory errors
modifying driver to incorporate
restriction
SCB field
support on Non-DIGITAL device
device level module
driver
universal library entry
UCB field
Unexpected traps or interrupts
unknown device
See EUNKWN
unused vectors
Error logging devices
control file module
Error logging system
CDA
Control file language compil~r
device I/O activity
Error log interface
Error logger
executive routines
hard error
mass storage device errors
memory errors
operating system failure
Report generator
soft error
Error message
See also Message
BAD utility
BRU utility
CMP utility
Console Logger
CRF utility
DMP utility
DSC utility
EDI editor
FLX utility
FMT utility

System Management 5-5
Executive 5-162
System Generation (llM) 4-30
Error Logging 1-6
Executive 5-162
Error iogging 1-6
Error Logging 1-6
Error Logging 1-6
Error Logging 1-6
Error Logging 1-6
Error Logging 1-6
Error Logging 1-6
Writing I/O Driver 3-5
Release Notes 1-24
Writing I/O Driver 4-20
Error Logging 4-19
Error Logging 4-19
Error Logging 4-19
Error Logging 4-19
Writing I/O Driver 4-24 to 4-25
Error Logging 1-6
Error Logging 1-6
Error Logging 2-4 to 2-5
Error Logging 1-1
Error Logging 1-1
Error Logging 1-1
Error Logging 1-1
Error Logging 1-1
Error Logging 1-1
Error Logging 1-3
Error Logging 1-1
Error Logging 1-1
Error Logging 1-1
Error Logging 1-1
Error Logging 1-3
Introduction 1-1, 2-9, Gloss-12
System Generation (llM) 8-1
Command Language A-1
Utilities 6-10
Utilities 7-34
Utilities 12-6
System Management 3-11 to 3-13
Utilities B-5
Utilities 11-12
Utilities 8-28
Utilities 2-56
Utilities 4-17
Utilities 5-10

Index-90

MASTER INDEX
Error message (Cont.)
FORTRAN IV
IOX
LBR utility
list of
MAC task
MACR0-11
ODT
PAT utility
PIP utility
purpose of
RMD
SLP utility
TKB
TKTN

UETP
VFY utility
VMR
ZAP utility
ERROR module
Error notice
macro definition
Error report
data compare
IOX
directing to device
IOX
disabling
IOX
enabling
IOX
I/O error
IOX
types
IOX
UETP
Error sequence number
See ERRSEQ
Error type definition
ERRORLIMIT command
IOX
ERR ORM
/ERRORS qualifier
BRU utility
ERRSEQ
Append switch
change
RMD use
<ERRSEV> symbol
ERSll
ERS34
<ERSEEN> symbol
ERXOl
ERX02
ESA field in NAM block
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary

Program Development 7-4
System Management 4-66
Utilities 10-33
EDT Editor A-1
PDP-11 MACR0-11 8-19 to 8-21
Program Development 3-5
Program Development 5-3
Utilities 14-7
Utilities 3-43
EDT Editor 3-7
System Management 6-13D
Utilities 13-20
Program Development 4-2
Program Development 4-8
System Management 9-5
Utilities 9-11
System Management 10-76
Utilities 15-23
Error Logging 4-19
PDP-11 MACR0-11 7-15 to 7-16
System Management 4-21
System Management 4-41
System Management 4-52
System Management 4-52
System Management 4-21
System Management 4-52
System Management 9-4
Error Logging 1-5
System Management 4-35
Error Logging 4-7
Utilities 7-16
Error Logging 1-3
Error Logging 1-3
Error Logging 1-3
MCR Operations 4-10
Error Logging 4-9
Error Logging 4-9
MCR Operations 4-8
Error Logging 4-9
Error Logging 4-9
RMS-11 Macros 3-3, 3-9
RMS-11 Macros 5-10
RMS-11 Macros 5-36
RMS-11 Macros 5-42
RMS-11 Macros 6-94
RMS-11 Macros 5-74
RMS-11 Macros 5-87
RMS-11 Macros 5-104
RMS-11 Macros 5-110
RMS-11 Macros 5-116
RMS-11 Macros 6-97

Index-91

MASTER INDEX
$ESB
predefined syntax element in
MML

ESC command
RMSDES utility
ESC key
Escape code
conversion
ESCape command
EDI editor
ESCAPE key
EDI editor
requesting list of options
ACNT
Escape recognition mode
Escape sequence
receiving
syntax exception
syntax violation
VTlOO

ESCAPE sequence from terminal
Escape-sequence recognition
mode
option
<ESCAPE> symbol
/ESCSEQ keyword
SET command
VMR
ESL field in NAM block
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
ESS field in NAM block
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
summary
/EST keyword
RUN command
ET0310
ET1645
ETAll
ETCll
ETSll
ETSV05
ETU58
ETU77
EUNKWN
Evaluating expression
See also Expression
.EVEN assembler directive
control block alignment

System Management 12-43
RMS-11 Utilities 2-9, 2-21
Command Language 3-12
MCR Operations 2-15
I/O Drivers 2-40A, 3-30
Utilities 2-14, 2-32
Command Language 3-12
Program Development 2-13
System Management 2-3
MCR Operations 4-33
I/O Drivers 2-29, 3-22
I/O Drivers 2-32
I/O Drivers 2-33
I/O Drivers 2-32
I/O Drivers 2-31
Command Language 3-17
MCR Operations 4-33
MCR Operations 3-178
System Management 10-49
MCR Operations 4-9
MCR Operations 3-178
System Management 10-49
RMS-11 Macros 5-21
RMS-11 Macros 5-37
RMS-11 Macros 5-42
RMS-11 Macros 6-94
RMS-11 Macros 5-77
RMS-11 Macros 5-88
RMS-11 Macros 5-105
RMS-11 Macros 5-111
RMS-11 Macros 5-116
RMS-11 Macros 6-98
RMS-11 Macros 5-10
RMS-11 Macros 5-36
RMS-11 Macros 5-42
RMS-11 Macros 6-94
RMS-11 Macros 5-74
RMS-11 Macros 5-87
RMS-11 Macros 5-104
RMS-11 Macros 5-110
RMS-11 Macros 6-99
MCR Operations 3-152
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-8, 4-19, 4-37

RMS-11 Macros 2-8
Index-92

MASTER INDEX
.EVEN assembler directive (Cont.}
pool alignment
.EVEN directive
Event
definition
flag
pool
affecting pool condition
detecting
extreme fragmentation
general fragmentation
major
significant
Event flag
common
group global

implicitly altering
locking
mask word
parameter to FDBF$A
parameter to FDBK$A
polarity
reporting polarity
setting
stopping for
testing
unlocking
use in IOX
using for I/0 operations
wait for
Event-level dispatching
control information
CPU-detected errors
device control information
device errors
device information
dispatcher module
error log control code
event code
event type
format
system control information
/EX switch
LBR utility
PIP utility
EXACT POSITIONING
RMSDES utility
Examine location
See Displaying
Examine opt ion
ACNT
Example
Brief format report
device information table
DSP2Ml dispatch module
DSP2Ml dispatcher module
ERM23
ERM23 device-level module
ERM23 module

RMS-11 Macros 2-4
PDP-11 MACR0-11 6-37
Error Logging 1-3, 4-2
Executive 2-2
System Management 13-3
System Management 13-1
System Management 13-1 to 13-4,
13-7 to 13-10, 13-12
System Management 13-2 to 13-4
System Management 13-1 to 13-3
Introduction 5-8, Gloss-30
Executive 2-1, 5-52
Executive 2-2
Executive 2-2
Executive 2-2
Executive 5-60, 5-206
System Generation (llM) 4-35
Command Language 6-91 to 6-92,
9-32, 9-38
Executive 2-2
Executive 5-40
Executive 5-105
I/O Operations 2-17
I/O Operations 2-12
Executive 5-28
Executive 5-125, 5-127
Executive 5-159
Executive 5-198, 5-201
Executive 2-3
Executive 5-60, 5-206
System Management 4-64
I/O Operations 2-42
Executive 5-223
I/O Drivers 1-24
Error Logging 4-16
Error Logging 4-17
Error Logging 4-17
Error Logging 4-17
Error Logging 4-17
Error Logging 4-17
Error Logging 4-18
Error Logging 4-17
Error Logging 4-18
Error Logging 4-18
Error Logging 4-18
Error Logging 4-17
Utilities 10-18
Utilities 3-21
RMS-11 Utilities 2-47

System Management 2-4 to 2-5
Error Logging 3-13 to 3-14
Error Logging 4-34
Error Logging 4-14
Error Logging 4-50 to 4~56
Error Logging 4-26
Error Logging 4-37 to 4-49
Error Logging 4-14
Index-93

MASTER INDEX
Example (Cont.)
ERM23 notes file
error log packet format
error log subpacket format
Full format report
notes module
NRM23 notes module
Register report
RM02/03
register printing
RM02/03 module
RM03 module
RMSBCK utility
RMSCNV utility
RMS DES utility
RMSDSP utility
RMSIFL utility
RMSRST utility
Exception code
RMSIFL utility
Exception record
RMSIFL utility
Exclamation point (!)
operator
See ODL operator
/EXCLUDE qualifier
BRU utility
EXECUTE command
IOX
Execution
termination
of task
IOX
Execution mode
entering
IOX
IOX
Executive
building
change to task abort code
code
changes to
commons
conf ig ur ing
using VMR
data structures
changes to
debugging
definition
directive
Large (20K)
library
macro
module
CORAL.MAC
pool monitor
code
interface
routines
$GTWRD
$PTWRD
size
source files disk
source module
updating

Error Logging 4-31
Error Logging 5-2
Error Logging 5-2
Error Logging 3-16 to 3-17
Error Logging 4-67 to 4-68
Error Logging 4-67 to 4-68
Error Logging 3-19
Error Logging 4-27
Error Logging 4-38 to 4-49
Error Logging 4-13
RMS-11 Utilities 6-10
RMS-11 Utilities 4-16
RMS-11 Utilities 2-47
RMS-11 Utilities 5-5
RMS-11 Utilities 3-14
RMS-11 Utilities 7-12
RMS-11 Utilities 3-6
RMS-11 Utilities 3-5 to 3-6, 3-10

Utilities 7-16
System Management 4-36

System Management 4-23
System Management 4-59
System Management 4-18
Introduction 1-21, 4-1, 4-9, 5-6
to 5-8, 5-11, Gloss-12
System Generation (llS) 4-5
Release Notes 1-24
Release Notes 1-32
System Generation {llM) 4-24
System Generation {llS) 4-10
Release Notes 1-32
MCR Operations 3-26
System Generation (llM) 1-3
Introduction 5-8
System Generation (llM) 4-30
Program Development 1-11
Program Development 1-9 to 1-10
System Management 13-2 to 13-3
System Management 13-1, 13-12
System Management 13-2 to 13-3
System Generation
System Generation
System Generation
System Generation
Release Notes 1-40
Index-94

(llM)
(llM)
(llS)
(llM)

4-31
4-31
1-3
4-9

MASTER INDEX
Executive (Cont.)
virgin
booting
Executive Crash Dlliup Routine

MCR Operations 3-24
Crash Dump Analyzer 1-1
Writing I/O Driver 3-20

Executive Debugging Tool
See XDT
Executive directive
summary
Executive error logging support
Executive Reference Manual
note to
Executive routines
error collection

I/O Operations C-1 to C-3
Error Logging 1-6
Release Notes 1-62

device registers

Error Logging 1-3

Executive Send Message directive
See SMSG$
Executive service
driver processing
postinitiation
pre initiation
Executive service calls
Executive stack and register dump
routine
debugging driver code
use of
in fault tracing
Executive Symbol Table
Executive-level dispatching
EXELIB.OLB
EXEMC.MLB

Writing I/O Driver 2-10
Writing I/O Driver 2-11
Writing 1/0 Driver 2-11
Writing I/O Driver 5-1 to 5-28
Writing I/O Driver 3-17
Writing I/O Driver 3-16
Writing I/O Driver 3-25
Crash Dump Analyzer 1-1
Executive 5-5
Program Development 1-11
Command Language 6-40
Command Language 6-41
Crash Dump Analyzer B-1
Program Development 1-9 to 1-10

Exercise
NFS volume
with VERIFY
IOX

System Management 4-14

with VERIFY
!OX

EXIF$
Existing file
opening by file ID
/EXIT
Exit
ODT
task resources freed
EXIT & DELETE command
EDI editor
EXIT command
EDI editor
EDT
IOX

keypad editing
line editing
nokeypad editing
nokeypad editing {EX)
RMSDES utility
Exit command
ODT

System Management 4-14
Executive 5-67
I/O Operations 3-14
Crash Dump Analyzer 2-6
ODT 1-4
Executive 1-3
Utilities 2-32
EDT Editor 2-31, 7-8
Program Development 2-10, 2-12,
2-18, 7-5, 7-7
Utilities 2-14, 2-27, 2-32
Introduction 2-14 to 2-15, 3-9
System Management 4-37
EDT Editor 2-20, 5-9
EDT Editor 2-28, 7-8
EDT Edi tor 8-10
EDT Editor 2-44
RMS-11 Utilities 2-3, 2-9, 2-18,
2-27
ODT 2-11

Index-95

MASTER INDEX
.EXIT directive
example
format
Exit If directive
Exit option
ACNT
Exit status
Indirect
Exit Status Code
definition
Exit switch
Exit With Status directive
EXIT$S directive
EXIT/SEQUENCE
VFC format
Expanded string
See ESA field in NAM block
EXPANSIONS argument
Explicit prompt
Expression
absolute
complex relocatable
evaluating
evaluation of
external
format
numeric
evaluating
signed arithmetic in
Radix-SO
relocatable
string
Expression indicator
immediate
$EXRQP routine
EXST$
<EXSTAT> symbol
<EXSTRI> symbol
EXT command
/EXT keyword
HOME command
INI command
MOUNT command
Extend access
$EXTEND macro
RSTS/E
EXTEND operation
and shared access
BDB requirement
$EXTEND macro
I/O buffer requirement
wildcard loop
/EXTEND qualifier
BRU utility
Extend size
default
volume default
Extend Task directive
to improve performance
Extended arithmetic element

MCR Operations 4-36
MCR Operations 4-36
MCR Operations 4-36
Executive 5-67
System Management 2-8
MCR Operations 4-10, 4-51
Batch and Queue Gloss-4
Crash Dump Analyzer 2-7
Executive 5-71
Executive 5-69
Program Development 2-7
EDT Editor 6-4
PDP-11 MACR0-11 8-11
Introduction 1-5, Gloss-12,
Gloss-25
ODT 2-3
PDP-11 MACR0-11 3-17
PDP-11 MACR0-11 3-18
ODT 2-3, 7-2
PDP-11 MACR0-11 3-16 to 3-18
PDP-11 MACR0-11 3-17
ODT 2-2
MCR Operations 4-14
MCR Operations 4-15
MCR Operations 4-33
ODT 7-4
PDP-11 MACR0-11 3-17
MCR Operations 4-16
PDP-11 MACR0-11 3-2
Writing I/O Driver 5-9
Executive 5-71
MCR Operations 4-10
MCR Operations 4-13
EDT Editor 8-10
MCR Operations 3-72
MCR Operations 3-79
MCR Operations 3-119
MCR Operations 2-3
RMS-11 Macros 5-46
RMS-11 Macros D-4
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Macros 3-8
RMS-11 User's Guide 2-6
RMS-11 Macros 2-8
RMS-11 Macros 5-46
RMS-11 Macros 2-7
RMS-11 Macros 3-10
Utilities 7-16
I/O Operations 2-8
I/O Operations 2-8
Executive 5-73
Task Builder F-2

See EAE

Extended attribute block
See XAB
Index-96

MASTER INDEX
Extended instruction set
See EIS
EXTENSION
RMSDES utility
area section
file section
Extension
file
See File type
Extension header
EXTENSIONS argument
External expression
External file (RMSDES)
See Data file, Description file
External symbol
See Global symbol
EXTK$
.EXTND
control bits for
effect of on F.CNTG
EXTSCT option
EXTSCT Task-build command
to extend FSR size
$EXTSK (Extend task)
EXTTSK option

RMS-11 Utilities 2-45
RMS-11 Utilities 2-32

I/O Operations F-6
PDP-11 MACR0-11 8-11
PDP-11 MACR0-11 3-17

Executive 5-73
I/O Operations 4-21
I/O Operations 4-23 to 4-24
I/O Operations 2-7
Task Builder 11-14
I/O Operations 2-40
System Library 8-13
Task Builder 11-15

F
F command
"'F operator
F register
/F switch
F$-family macro
declaring
example
F.ALOC
See Extend size
F.CNTG
F.DFNB
F .DSPT
F.FACC
F.MBCT
F.RACC
See FDB
F.RATT
FllACP
role of
in I/O data structure
FllDF$
F4POTS.OLB (FORTRAN IV and
FORTRAN IV-PLUS library)
/FA switch
FLX utility
FAB
chaining to RAB
declaring
initializing
summary
FAB field in RAB
chaining FAB to RAB
CONNECT operation
off set
summary

ODT 2-9, 6-4
PDP-11 MACR0-11 3-5, 6-35 to 6-36
ODT 2-6, 5-3
Error Logging 3-5
RMS-11 Macros 2-9
RMS-11 Macros C-1
RMS-11 Macros 7-3, 7-7, 7-11,
7-15
I/O Operations
I/O Operations
I/O Operations
I/O Operations
I/O Operations

2-6 to 2-7
2-14
2-13
2-14
2-18

I/O Operations 2-6
I/O Operations F-6
RMS-11 Introduction 2-1
RMS-11 User's Guide 8-13
Writing I/O Driver 2-19
Crash Dump Analyzer B-15
Program Development 1-11
Utilities 4-5
RMS-11 Introduction 4-8
RMS-11 Macros 2-13
RMS-11 Macros 2-8
RMS-11 Macros 2-9
RMS-11 Macros 6-22
RMS-11 Macros 4-2
RMS-11 Macros 2-13
RMS-11 Macros 5-6
RMS-11 Macros 6-115
RMS-11 Macros 6-120
Index-97

MASTER INDEX
FAB$B macro
example
FAB$BT macro
FAB$E macro
declaring
example
FABOF$ macro
FAC field in FAB
CREATE operation
off set
OPEN operation
summary
Facilities-declaration macro
declaring
Factor
autoloadable
making first component of
FAL
RSTS/E
RSX-llM/M-PLUS
VAX/VMS
<FALSE> symbol
Fast deletion
See RB$FDL mask in ROP field
Fast Task Builder
See also FTB
speed of
supported
features
options
switches
unsupported features
Fatal error
Fault code
Fault isolation
Fault tracing
after unintended loop
Executive stack and register
dump
hints
in new driver
when processor halts without
display
/FB switch
FLX utility
FB$-family symbol
declaring
FB$BID code in BID field
summary
value
FB$BLK mask in RAT field
CREATE operation
OPEN operation
summary
value
FB$BLN code in BLN field
summary
value
FB$CCL mask in DEV field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation

RMS-11 Macros
RMS-11 Macros
7-15
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
7-15
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

2-8, C-1
7-3, 7-7, 7-11,
C-1
2-9
C-1
7-3, 7-7, 7-11,
C-1
5-14
6-22
5-75
6-37
2-2
C-2

Task Builder 4-3
RMS-11 User's Guide B-1
RMS-11 User's Guide B-1, B-3
RMS-11 User's Guide B-3
RMS-11 User's Guide B-3
MCR Operations 4-9
Command Language 6-70 to 6-71
Task Builder G-1
Task Builder G-2
Task Builder G-1 to G-2
Task Builder G-2
Task Builder G-1
Task Builder G-1 to G-2
RMS-11 Macros 2-15
Writing I/O Driver 3-26
Writing I/O Driver 3-20 to 3-23
Writing I/O Driver 3-23 to 3-24
Writing I/O Driver 3-28
Writing I/O Driver 3-25 to 3-27
Writing I/O Driver 3-28 to 3-29
Writing I/O Driver 3-28
Writing I/0 Driver 3-27
Utilities 4-5
RMS-11 Macros C-1
RMS-11 Macros 6-26
RMS-11 Macros 6-22
RMS-11 Macros 5-11
RMS-11 Macros 5-78
RMS-11 Macros 6-60
RMS-11 Macros 6-23
Macros
Macros
Macros
Macros
Macros
RMS-ii Macros
RMS-11 Macros
RMS-11 Macros
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Index-98

6-28
6-22
3-1
5-20
5-37
5-42
5-77
5-88

MASTER INDEX
FB$CCL mask in DEV field (Cont.)
REMOVE operation
RENAME operation
SEARCH operation
value
FB$CR mask in RAT field
CREATE operation
OPEN operation
value
FB$CTG mask in FOP field
CREATE operation
EXTEND operation
OPEN operation
RSTS/E
summary
value
FB$DEL mask in FAC field
CREATE operation
OPEN operation
value
FB$DFW mask in FOP field
CREATE operation
OPEN operation
summary
value
FB$DLK mask in FOP field
CREATE operation
OPEN operation
summary
value
FB$FID mask in FOP field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
REMOVE operation
RENAME operation
summary
value
FB$FIX code in RFM field
CREATE operation
OPEN operation
value
FB$FTN mask in RAT field
CREATE operation.
OPEN operation
value
FB$GET mask in FAC field
CREATE operation
OPEN operation
value
FB$GET mask in SHR field
CREATE operation
OPEN operation
value
FB$IDX code in ORG field
CREATE operation
OPEN operation
value
FB$MDI mask in DEV field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation

RMS-11 Macros 5-104
RMS-11 Macros 5-111
RMS-11 Macros 5-117
RMS-11 Macros 6-24
RMS-11 Macros 5-12
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 5-18
RMS-11 Macros 5-46
RMS-11 Macros 5-78
RMS-11 Macros D-4
RMS=ll Macros 6-40
RMS-11 Macros 6-23
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros 5-15
RMS-11 Macros 5-76
RMS-11 Macros 6-41
RMS-11 Macros 6-23
RMS-11 Macros 5-15
RMS-11 Macros 5-76
RMS-11 Macros 6-42
RMS-11 Macros 6-23
RMS-11 Macros 3-7, 3-9 to 3-11
RMS-11 Macros 5-10
RMS-11 Macros 5-36
RMS-11 Macros 5-41
RMS-11 Macros 5-73 to 5-74
RMS-11 Macros 5-103
RMS-11 Macros 5-109 to 5-110
RMS-11 Macros 6-43
RMS-11 Macros 6-23
RMS-11 Macros 5-11
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 5-12
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

Index-99

5-11
5-78
6-23
3-1
5-20
5-37
5-42
5-77
5-88
5-104
5-111

MASTER INDEX
FB$MDI mask in DEV field {Cont.)
SEARCH operation
value
FB$MKD mask in FOP field
CREATE operation
summary
value
FB$NEF mask in FOP field
OPEN operation
RSTS/E
summary
value
FB$NIL mask in SHR field
CREATE operation
OPEN operation
value
FB$POS mask in FOP field
CREATE operation
summary
value
FB$PRN mask in RAT field
CREATE operation
OPEN operation
value
FB$PUT mask in FAC field
CREATE operation
OPEN operation
value
FB$REA mask in FAC field
CREATE operation
OPEN operation
value
FB$REC mask in DEV field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
value
FB$REL code in ORG field
CREATE operation
OPEN operation
value
FB$RWC mask in FOP field
CLOSE operation
CREATE operation
OPEN operation
SEARCH operation
summary
value
FB$RWO mask in FOP field
CREATE operation
OPEN operation
SEARCH operation
summary
value
FB$SDI mask in DEV field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation

RMS-11 Macros 5-117
RMS-11 Macros 6-24
RMS-11 Macros 5-11
RMS-11 Macros 6-44
RMS-11 Macros 6-23
RMS-11 Macros 5-76
RMS-11 Macros D-4
RMS-11 Macros 6-45
RMS-11 Macros 6-23
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros 5-15
RMS-11 Macros 6-46
RMS-11 Macros 6-23
RMS-11 Macros 5-12
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-14
5-75
6-22
3-1 to 3-2
5-20
5-37
5-42 to 5-43
5-77
5-88
5-104
5-111
5-117 to 5-118
6-24

RMS-11 Macros 5-11
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-4
5-15
5-77
5-117
6-47
6-23

RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-15
5-76
5-117
6-48
6-23
3-2
5-20
5-37
5-43
5-77
5-88
5-104
5-111

Index-100

MASTER INDEX
FB$SDI mask in DEV field (Cont.)
SEARCH operation
value
FB$SEQ code .._U Vri.U field
CREATE operation
OPEN operation
value
FB$SQD mask in DEV field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
value
FB$STM code in RFM field
CREATE operation
OPEN operation
value
FB$SUP mask in FOP field
CREATE operation
summary
value
FB$TMD mask in FOP field
CREATE operation
value
FB$TMP mask in FOP field
CREATE operation
summary
value
FB$TRM mask in DEV field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
value
FB$TRN mask in FAC field
CREATE operation
OPEN operation
value
FB$UDF code in RFM field
CREATE operation
OPEN operation
value
FB$UPD mask in FAC field
CREATE operation
OPEN operation
value
FB$UPI mask in SHR field
CREATE operation
OPEN operation
value
FB$UPI mask in SHR field of FAB
RSX-11
FB$VAR code in RFM field
CREATE operation
OPEN operation
value
FB$VFC code in RFM field
CREATE operation
OPEN operation
.;_

RMS-11 Macros 5-118
RMS-11 Macros 6-24

l"\T"\,...

RMS-11 Macros 5-11
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 3-2
RMS-11 Macros 5-20
RMS-11 Macros 5-37
RMS-11 Macros 5-43
RMS-11 Macros 5-77
RMS-11 Macros 5-88
RMS-11 Macros 5-104
RMS-11 Macros 5=111
RMS-11 Macros 5-118
RMS-11 Macros 6-24
RMS-11 Macros 5-11
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 5-10
RMS-11 Macros 6-49
RMS-11 Macros 6-23
RMS-11 Macros 5-11
RMS-11 Macros 6-23
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-11
6-50
6-23
3-1
5-20
5-37
5-42
5-77
5-88
5-104
5-111
5-117
6-24

RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros 5-11
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros D-4
RMS-11 Macros 5-11
RMS-11 Macros 5-78
RMS-11 Macros 6-23
RMS-11 Macros 5-11
RMS-11 Macros 5-78

Index-101

MASTER INDEX
FB$VFC code in RFM field (Cont.)
value
FB$WRI mask in SHR field
CREATE operation
OPEN operation
value
FB$WRT mask in FAC field
CREATE operation
OPEN operation
value
$ FBCAL macro
/FC switch
FLX utility
FCB
role of
in I/O data structure
FCP
definition
option
role of
in I/O data structure
support
u:::;er-written
FCPLRG
FCPMDL
FCPMIN
FCPSML
FCS
characteristics of
conditional assembly parameters
definition
library descriptions
library options
PLAS resident library
pqsition of
in I/O hierarchy
RSX-llS subset
library
resident
system object
using
tasks that use
FCS impure area
allocating
FCS macro
declaring
FCS routine
error return
list of
FCS-11
sequential file compatibility
FCSMC$
FCSRES
linking tasks to
.FCTR directive
argument
library modules
library to resolve references
named input file
PSECT name
segment name
arguments for
use of label in
.FCTR statement
allocation diagram
creating from

RMS-11 Macros 6-23
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros 5-14
RMS-11 Macros 5-75
RMS-11 Macros 6-22
RMS-11 Macros C-2
Utilities 4-7
RMS-11 User's Guide 8-12
Writing I/O Driver 2-20
System Generation (llM) 1-4
System Generation (llM) 4-57
Writing I/O Driver 2-19
System Generation (llM) 4-22
System Generation (llM) 4-59
System Generation (llM) 4-58
System Generation (llM) 4-58
System Generation (llM) 4-57
System Generation (llM) 4-58
I/O Operations 4-1
Introduction 5-12, Gloss-12
I/O Operations 1-12
I/O Operations K-1 to K-2
System Generation (llM) 1-3
I/O Operations K-1
I/O Operations K-1
System Generation (llM) 4-57
Writing I/O Driver 2-2
System Generation (llS) 2-23
System Generation
System Generation
System Generation
System Generation

(llS)
(llS)
(llS)
(llM)

4-13
4-12
2-26
7-1

I/O Operations 2-37
I/O Operations 2-3
I/O Operations 4-2
I/O Operations 4-2
RMS-11 User's Guide 3-2
I/O Operations 2-3
System Generation (llM) 7-4
Task Builder 3-24
Task Builder 3-25
Task Builder 3-25
Task Builder 3-24
Task Builder 3-25
Task Builder 3-25
Task Builder 3-24
Task Builder 3-24
Task Builder 3-37 to 3-38

Index-102

MASTER INDEX
I/O Operations K-2

.FCTYP values
FD.BLK
See Record attribute
See Record attribute
FD.FTN
See Record attribute
FD.PRN
See Record attribute
FDB
block access section
block buffer section
definition of
file attribute section
file open section
format
GET$
offset definitions
offsets
PUT$
READ$
record access section
record or block access section
WRITE$
FOB information
macro calls
FDB macro
initializing
FDBDF$
FDBF$A
using with big buffer
FDBF$A macro call
format
FDBF$R
using with big buffer
FDBK$A
format
parameters
FDBK$R
compatability with FDBK$A
FDRC$A
format
/FDX keyword
SET command

VMR
$FETCH macro
example
FF command
EDI editor
/FF switch
CMP utility
/FI switch
DMP utility
PIP utility
QUE /DEL command
QUE /MOD command
FID field in NAM block
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
REMOVE operation
RENAME operation

I/O Operations 1-10, A-1
I/O Operations 2-10
I/O Operations A-2
I/O Operations 1-10
I/O Operations A-2
I/O Operations A-2
I/O Operations A-1 to A-2
I/O Operations 3-20
I/O Operations A-3 to A-8
I/O Operations A-5
I/O Operations A-1
I/O Operations 3-26
I/O Operations 3-34
I/O Operations 2-8
I/O Operations A-2
I/O Operations 3-35
I/O Operations 2-2
I/O Operations 2-2
I/O Operations 2-3
I/O Operations 2-5
I/O Operations 1-8
I/O Operations 2-17
I/O Operations
I/O Operations
I/O Operations
I/O Operations

1-8
2-10
2-11
2-11

I/O Operations 2-11
I/O Operations 2-8
MCR Operations 3-179
System Management 10-49
RMS-11 Macros 2-15
RMS-11 Macros 7-3, 7-7, 7-11,
7-15
Utilities 2-34
Utilities 12-3
Utilities 11-5
Utilities 3-22
Batch and Queue 2-11
Batch and Queue 2-21
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Index-103

Macros
Macros
Macros
Macros
Macros
Macros
Macros

5-21
5-36
5-41 to 5-42
6-94
5-73, 5-77
5-105
5-111

MASTER INDEX
FID field in NAM block (Cont.)
SEARCH operation
summary
Field
clearing bits in
comparing value
copying value from
copying value into
examining
file specification
initializing
mnemonic
setting bits in
setting up
testing bits in
Field size symbol
Field terminator
Field-access macro
$COMPARE
declaring
$FETCH
$OFF
$SET
$STORE
$TESTBITS
Field-initialization macro
declaring
ALL block
DAT block
FAB
KEY block
NAM block
PRO block
RAB
SUM block
Field-offset symbol
declaring
ALL block
DAT block
FAB
KEY block
NAM block
PRO block
RAB
SUM block

XAB
value
ALL block
DAT block
FAB
KEY block
NAM block
PRO block
RAB
SUM block
$FIL
predefined syntax element in

MML
/FIL keyword
HELP command
<FILATR> symbol
$FILE
predefined syntax element in

MML

RMS-11 Macros 5-118
RMS-11 Macros 6-100
RMS-11 Macros 1-2
RMS-11 Macros 2-11
RMS-11 Macros 2-16
RMS-11 Macros 2-15
RMS-11 Macros 2-10
RMS-11 Macros 2-15
Introduction 1-14
RMS-11 Macros 2-8
RMS-11 Macros 1-2
RMS-11 Macros 2-11
RMS-11 Macros 2-10
RMS-11 Macros 2-17
I/O Operations J-1
PDP-11 MACR0-11 3-2
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros
Macros
Macros
Macros
Macros
Macros
Macros
Macros

2-16
C-2
2-15
2-11
2-11
2-10
2-17
2-9

RMS-11 Macros C-3
RMS-11 Macros C-3
RMS-11 Macros C-1
RMS-11 Macros C-3
RMS-11 Macros C-2
RMS-11 Macros C-3
RMS-11 Macros C-2
RMS-11 Macros C-3
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros C-3
Macros C-3
Macros C-1
Macros C-3
Macros C-2
Macros C-3
Macros C-2
Macros C-3
Macros C-4

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros
Macros
Macros
Macros
Macros
Macros
Macros
Macros

to C-4
to C-4
to C-4
to C-4
to C-4

6-2
6-14
6-22
6-67
6-94
6-108
6-115
6-145

System Management 12-41
MCR Operations 3-65
MCR Operations 4-13
System Management 12-41

Index-104

MASTER INDEX
Introduction 1-14, 2-1, 2-16, 3-1,
3-12, Gloss-13
Command Language 4-1
MCR Operations 2-1
RMS-11 Introduction 1-1
RMS-11 User's Guide 1-2

File

See also Account file
See also Indexed file
organization
See also Relative file
organization
See also Sequential file
organization
access code
assigning
type
user group
access requested
See FAC field in FAB
access shared
See SHR field in FAB
accessing
account
setting up
alignment
See ALN field in ALL block
allocation
See ALQ field in ALL block
See ALQ field in FAB
appending
PIP utility
area
See ALL block
assembler work
attributes

MCR Operations 2-3
MCR Operations 2-3
MCR Operations 2-3

MCR Operations 2-2
MCR Operations 2-24

Utilities 3-14
PDP-11 MACR0-11 F-1
RMS-11 Introduction 5-1
RMS-11 User's Guide 1-2
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-10, 1-12

backing up
bucket size
See BKS field in FAB
See BKZ field in ALL block
chaining to
checkpoint
allocating
number of blocks
discontinuing
example
freeing
closing
See CLOSE operation
cluster size
See RTV field in FAB
command
level of indirection
comparing
CMP utility
contiguity
See FB$CTG mask in FOP field
See XB$CTG mask in AOP field
contiguous
control directive
converting
copying

BRU utility
DOS-11
DSC utility

MCR Operations 4-28
Command Language 5-11, 5-65, 5-74,
6-68
MCR Operations 3-8
MCR Operations 3-8
MCR Operations 3-8
MCR Operations 3-8
MCR Operations 3-9
I/O Operations 3-17

Task Builder 1-7
Utilities 12-1

Introduction 4-8
PDP-11 MACR0-11 6-57 to 6-58
RMS-11 User's Guide 1-10, 1-12
Introduction 3-7
Utilities 7-1
Utilities 4-3
Utilities 8-1

Index-105

MASTER INDEX
File
copying (Cont.)
Files-11
FLX utility
PIP utility
RT-11
copying text into
creating

See also CREATE operation
EDI editor
source
creation date
See CDT field in DAT block
date
See DAT block
declaring number of active
default extension size
See DEQ field in ALL block
See DEQ field in FAB
deleting
See also ERASE operation
PIP utility
deleting by filename block
deleting wildcard
design
determining existence of
directory listing
displaying
block number
PIP utility
distribution kit
dumping
DMP utility
editing
EDI editor
source
error log
inserting text
exiting from
extending
default size
specifying
extending allocation
See EXTEND operation
FORTRAN direct access
See FLX utility
header
help
calling other files
contents
displaying
default
example
format
level number
qualifier
synonymous
identifier

Utilities 3-8
Utilities 4-3
Utilities 3-8
Utilities 4-3
EDT Editor 7-3, 7-22
I/O Operations 3-4, 3-7
Introduction 2-1, 2-16
RMS-11 Introduction 5-1 to 5-2
RMS-11 User's Guide 1-10, 1-12
Utilities 2-2
Program Development 2-9 to 2-10

Task Builder 11-6

I/O Operations 3-38, 4-23
Introduction 3-9 to 3-10
Utilities 3-17
I/O Operations 4-24
I/O Operations 4-15
RMS-11 Introduction 3-15, 5-1
RMS-11 User's Guide 1-10, 1-12
MCR Operations 4-53
Program Development 3-9
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-10, 1-12
Utilities 3-25
System Generation (llS) 3-2
Utilities 11-1
Utilities 2-1
Program Development 2-9, 2-12 to
2-18
MCR Operations 3-212
MCR Operations 4-42
I/O Operations 4-21
MCR Operations 3-79, 3-119
MCR Operations 3-72

Introduction 3-6, 4-8, Gloss-13
MCR Operations 2-2
MCR Operations 3-67
MCR Operations
MCR Operations
MCR Operations
MCR Operations
MCR Operations

3-65
3-65
3-68
3-66
3-66

MCR Operations 3-67
Index-106

MASTER INDEX
File
identifier (Cont.)
See FID field in NAM block

index
accessing
header
allocating
LBN
specifying
listing contents
VFY utility
multi header
indirect command
See also Indirect command file
input
designating as debugging aid
designating as library file
directing selective symbol
search
including content of in map
processing to reduce overhead
specifying as default library
internal file identifier
See IFI field in FAB
library
declaring a
LBR utility
listing
FLX utility
LBR utility
PIP utility
loading
location
See LOC field in ALL block
locked

ODL

omitting a specific output
open at one time
opening
See OPEN operation

MCR Operations 3-80
MCR Operations 3-80
Utilities 9-6
MCR Operations 3-81
Task Builder 1-5
Introduction 4-5, Gloss-17
Task Builder 10-14
Task Builder 10-23
Task
Task
Task
Task

Builder 10-47 to 10-49
Builder 10-26
Builder F-6
Builder 10-15

Task Builder 10-23
Utilities 10-2
Program Development 3-6
Utilities 4-7
Utilities 10-21
Utilities 3-24
RMS-11 Introduction 5-2
RMS-11 User's Guide 1-10, 1-12
Command Language 4-75 to 4-76,
9-47

locking
See FB$DLK mask in FOP field
login-text
lost
recovering
VFY utility
MACR0-11 default specification
maintaining
making file autoloadable
using name
map
printing
maximum number of
specifying
merging
PIP utility
multiple
name
special character in
name block
See NAM block
non-RMS-11
object

MCR Operations 3-125

MCR Operations 3-60
Utilities 9-6
PDP-11 MACR0-11 8-3 to 8-6
RMS-11 User's Guide 1-10, 1-12
Task Builder 4-2
Task Builder 1-2
MCR Operations 3-73, 3-82
Utilities 3-9
EDT Editor 1-8, 2-32
Introduction 1-14, 3-8, 3-11
MCR Operations 2-4
MCR Operations 2-4
RMS-11 Introduction 3-4
Introduction 4-3, 4-5 to 4-9,
4-11 to 4-12, Gloss-22
RMS-11 User's Guide 8-3, 8-5
Task Builder l-3
Task Builder 11-6

Index-107

MASTER INDEX
Fil e ( Cont • )
opening an existing
opening by filename block
organization
See ORG field in FAB
output
owner
See PRG field in PRO block
owning
PIP utility
positioning
printing
processing
control routine
delaying
macro call
terminating
protecting
Files-11
PIP utility
protection

I/O Operations 3-4, 3-8
I/O Operations 3-14
Introduction 4-6, 4-10, Gloss-23
MCR Operations 2-2
Utilities 3-11
I/O Operations 4-18 to 4-19
Program Development 3-8 to 3-9
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-16
System Generation (llS) 2-25
MCR Operations 4-30
System Generation (115) 2-23
MCR Operations 4-42 to 4-43
MCR Operations 2-2, 3-72, 3-80,
3-120
Utilities 3-29
Introduction 3-6, 5-6, Gloss-25
to Gloss-26
Command Language 4-9

See also PRO field in PRO block
purging
Introduction 3-9 to 3-10
Program Development 3-9 to 3-10
PIP utility
Utilities 3-31
record-output characteristic
See RAT field in FAB
I/O Operations 4-20
renaming
Introduction 3-8
See also RENAME operation
Utilities 3-3 3
PIP utility
restoring
EDT Editor 3-1
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-10, 1-12
revising
EDT Editor 2-28
revision date
See ROT field in DAT block
revision number
See RVN field in DAT block
rewinding
I/O Operations 4-18
saving
BRU utility
Utilities 7-1
DSC utility
Utilities 8-1
secondary
MCR Operations 4-44
appending data to
closing
MCR Operations 4-29
opening
MCR Operations 4-44
for reading
MCR Operations 4-45
outputting text to
MCR Operations 4-29
source
Introduction 2-1, 4-3, 4-5,
Gloss-30
specification
RMS-11 Introduction 4-1
convention for
Task Builder 1-8
default for
Task Builder 1-8
specification string
See FNA field in FAB
default
See DNA field in FAB
parsing
See FNB field in NAM block
Utilities 1-4
specifying
ANSI
MCR Operations 1-2
quotation marks in
Index-108

MASTER INDEX
File
specifying (Cont.)
default
example
format
VMR
wildcard
spooling
PIP utility
string
See FNA field in FAB
structure
supersession
See FB$SUP mask in FOP field
symbol definition
overriding
system
command
requirements
image
determining minimum size
system image
configuring
Executive data space and
task image
text
transferring
FLX utility
truncating
See also TRUNCATE operation
PIP utility
type
standard
list
universal library
See Universal library file
updating
PAT utility
PIP utility
SLP utility
ZAP utility
validating contents
PAT utility
version
wildcard context
See WCC field in NAM block
wildcard operation
See NB$WCH mask in FNB field
wildcard search
See SEARCH operation
window
mapping po inter
allocating
File access
parameter to FDOP$A
File access block
See FAB
File access listener
See FAL
File access privileges
File allocation
See Allocation
File attribute
See also Attribute
RMSDSP utility

MCR Operat ons 2-7
MCR Operat OfiS 2-9
MCR Operat ons 2-4
System Management 10-3
MCR Operations 2-6
Program Development 1-8, 3-8 to
3-9
Utilities 3-38
RMS-11 Introduction 3-1
System Management 10-2
System Management 10-4
MCR Operations 3-57
MCR Operations 3-58
MCR Operations 3-157
System Management 10-1
System Management 10-2
Introduction 2-1, 4-3, 4-8, 4-14,
Gloss-33
Introduction 2-1, Gloss-33
Utilities 4-1
Utilities 3-40
MCR Operations 2-4
MCR Operations 2-7
MCR Operations 2-8

Utilities 14-1
Utilities 3-42
Utilities 13-1
Utilities 15-1
Utilities 14-6
MCR Operations 2-5

MCR Operations 3-74,
I/O Operations 3-16
I/O Operations 2-14

I/O Operations 3-3

Index-109

3~84,

3-127

MASTER INDEX
File attribute
RMSDSP utility {Cont.)
indexed file
detailed display
File back-up date
See Back-up date
FILe command
EDI editor
File Compare Utility
See CMP utility
File contiguity
See Contiguity
File Control Block
See FCB
File Control Processor
See also FCP
retrieval pointers
window turning
File Control Services
See FCS
File creation date
See Creation date
File Descriptor Block
See FDB
File Dump Utility
See DMP utility
File extension
See File type
File header area
characteristics
file number
file owner
file protection
file sequence number
identification area
map area offset
structure level
user file attributes
File header block
file header area
format

identification area
map area
predefined
File ID
opening file by
File identifier
processing by Files-11
File locking
File name
default
file specification
File operation
See also Operation
File operation macro
$CLOSE
$CREATE
declaring
$DISPLAY

RMS-11 Utilities 5-4

Utilities 2-33

RMS-11 Introduction 2-1, 4-3
RMS-11 User's Guide 1-16
RMS-11 User's Guide 8-11
RMS-11 User's Guide 8-12

I/O Operations F-4
I/O Operations F-3
I/O Operations F-4
I/O Operations F-4
I/O Operations F-3
I/O Operations F-3
I/O Operations F-3
I/O Operations F-4
I/O Operations F-4
I/O Operations 5-3
I/O Operations F-3
I/O Operations F-1 to F-2
I/O Operations F-4
I/O Operations F-5
I/O Operations E-2
I/O Operations 2-33 to 2-34, 3-13
I/O Operations G-6
I/O Operations 2-15
Command Language 4-3
RMS-11 User's Guide A-6
RMS-11 User's Guide A-2
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Macros 3-6
RMS-11 Macros 5-3
RMS-11 Macros 5-9
RMS-11 Macros C-2
RMS-11 Macros 5-29

Index-llO

MASTER INDEX
File operation macro {Cont.)
$ERASE
$EXTEND
.... .,. . ,
File organization
~,..,

~vrr:..1'1

See also Indexed file
organization
See also Relative file
organization
See also Sequential file
o rgani za ti on
and data storage
and file design
and optimizations
and record ~ormats
and standard ODL files
indexed
alternate keys
changeable keys
duplicate keys
index
keys
null keys
primary key
segmented keys
random access
to indexed files
to relative files
to sequential files
relative
cell
RRN
RMSDEF utility
selection
sequential
user-provided interlocks
sequential access
to indexed files
to relative files
to sequential files
File owner
nonprivileged user
pr iv il eg ed user
Fi 1 e owner word
format
reading
writing
FILE PLACEMENT
RMSDES utility
File processing
mag tape
File protection
File revision date
See Revision date
File Set Identifier
See also Fileset-ID
overriding

RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 5-72
RMS-11 Introduction 3-1, 3-4
RMS-11 user's Guide 1-11, 1-18

RMS-11 User's Guide 2-5
RMS-11 User's Guide 2-11
RMS-11 user's Guide 8-10
RMS-11 user's Guide 1-20, 2-15
RMS-11 User's Guide 8-5
RMS-11 Introduction 3-6
RMS-11 User's Guide 1-5, 1-11,
5-1, 6-1, 7-1
RMS-11 Introduction 3-7
RMS-11 Introduction 3-10
RMS-11 Introduction 3-10
RMS-11 Introduction 3-7
RMS-11 Introduction 3-6
RMS-11 Introduction 3-10
RMS-11 Introduction 3-7
RMS-11 Introduction 3-10
RMS-11 Introduction 3-15
RMS-11 Introduction 3-15
RMS-11 Introduction 3-14
RMS-11 Introduction 3-5
RMS-11 User's Guide 1-4, 1-11,
4-1
RMS-11 Introduction 3-5
RMS-11 Introduction 3-6
RMS-11 Utilities A-8
RMS-11 User's Guide 2-11
RMS-11 Introduction 3-4
RMS-11 User's Guide 1-3, 1-11,
3-1
RMS-11 User's Guide 2-7
RMS-11 Introduction 3-14
RMS-11 Introduction 3-14
RMS-11 Introduction 3-14
I/O Operations 4-5
I/O Operations 4-6
I/O Operations 4-5
I/O Operations 4-6
I/O Operations 4-6
I/O Operations 4-6
RMS-11 Utilities 2-30
RMS-11 Macros 3-1
I/O Operations 5-4
Command Language 2-6, 4-9, 4-79
to 4-82, 5-28, 5-38, 5-51,
5-58, 9-33
MCR Operations 3-116 to 3-117
MCR Operations 3-122
Index-lll

MASTER INDEX
File sharing
See Shared access
File size
in blocks
specifying
File space (RMSIFL)
calculating
File specification

See also File
See also Infile, Outfile
default
directory
name
node
type
version
default name string
definition of
file name string
fully qualified
mag tape
device
directory
quoted string
version
merged string
NAM block
node
parsing
See PARSE operation
quoted string
remote
RMSBCK utility
RMSDEF utility
RMSRST utility
standard
device
directory
name
type
version
wi ldcard
File specifier
See File specification
FILE statement
File Storage Region
See FSR
File structure
See also Structure
ANSI magtape
user
File Structure Verification
Utility
See VFY utility
File Transfer Utility
See FLX utility

System Management 4-61
RMS-11 Utilities 3-12
I/O Operations 2-27
Introduction 1-14, 2-2, 3-2, 3-4,
3-11 to 3-12, Gloss-13
Command Language 4-2 to 4-3
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-18 to 1-19
Introduction 1-15
RMS-11 User's Guide A-6
RMS-11.User's Guide A-6
RMS-11 User's Guide A-6
RMS-11 User's Guide B-2
RMS-11 User's Guide A-6
RMS-11 User's Guide A-6
RMS-11 User's Guide A-5 to A-6
I/O Operations 1-11
RMS-11 User's Guide A-5
RMS-11 Macros 3-4
RMS-11 User's Guide A-4 to A-5
RMS-11 User's Guide A-4
RMS-11 User's Guide A-4
RMS-11 User's Guide A-5
RMS-11 User's Guide A-5
RMS-11 Macros 3-3
RMS-11 User's Guide A-6
RMS-11 User's Guide B-2
RMS-11 User's Guide B-2
RMS-11 User's Guide B-2
RMS-11 Utilities 6-9
RMS-11 Utilities A-7
RMS-11 Utilities 7-10
RMS-11 User's Guide A-1
RMS-11 User's Guide A-1
RMS-11 User's Guide A-1
RMS-11 User's Guide A-2
RMS-11 User's Guide A-3
RMS-11 User's Guide A-3
RMS-11 Introduction 4-1
RMS-11 User's Guide A-2 to A-3
RMS-11 Macros 3-8
Error Logging 5-37 to 5-38
I/O Operations 5-1
I/O Operations G-8
I/O Operations 5-1

Index-112

MASTER INDEX
File truncation
automatic
PUT$
File type

default
.FTN
.LST
.MAC
.MAP
.MLB
.OBJ
.OLB
parsing
.PMD
.TSK
File version
0

default
parsing
special versions
wildcard
File version number
File-ID number
File-processing macro call
error handling
File-structured device

I/O Operations 4-22
I/O Operations 2-9
Introduction 1-14, 2-1, ~-ii to
3-12, 4-4 to 4-5, 4-7,
Gloss-14 to Gloss-15
Command Language 4-3 to 4-5
RMS-11 User's Guide A-3
RMS-11 User's Guide A-6
Program Development 7-3 to 7-4
Program Development 3-4, 6-11,
7-3 to 7-4
Program Development 3-1
Program Development 4-6
Program Development 6-1
Program Development 3-4, 7-5
Program Development 6-4
I/O Operations 4-11 to 4-12
Program Development 5-10
Program Development 4-1
RMS-11 User's Guide A-3, A-5
I/O Operations 4-16
I/O Operations 4-16
P.MS-11 User's Guide A-6
I/O Operations 4-11 to 4-12
I/O Operations 4-13
I/O Operations 4-16
Command Language 4-3
Introduction 3-6, Gloss-13
I/O Operations 3-1
I/O Operations 3-2
Introduction 5-10 to 5-11,
Gloss-13

exercising
!OX

FILE.MAC source code
/FILE POSITION file qualifier
SET-QUEUE command
/FILE POSITION qualifier
DELETE command
FILEA.MAC source code
FILEB.MAC source code
Filename
parsing
Filename block
ANSI format
default directory
definition of
deleting by
directory information
format
initializing
offset definitions
off sets
offsets for ANSI magtape
opening by
status word
<FILERR> symbol
Files
source
applying corrections to
/FILES qualifier
SHOW QUEUE command

System Management 4-3
Program Development 2-19 to 2-20
Batch and Queue 2-21
Batch and Queue 2-11
Program Development 2-21 to 2-22
Program Development 2-23 to 2-24
I/O Operations 4-8, 4-11 to 4-12
I/O Operations B-5
I/O Operations 4-17
I/O Operations 1-11
I/O Operations 4-24
I/O Operations 4-16
I/O Operations B-1, B-3
I/O Operations 2-35
I/O Operations B-2
I/O Operations B-1
I/O Operations B-4
I/O Operations 3-14
I/O Operations 4-11, B-3 to B-4
MCR Operations 4-11
Release Notes 1-40
Batch and Queue 2-15

Index-113

MASTER INDEX
Files-11

I/O Operations 5-1, E-1, F-5, G-3,
G-6
Introduction 5-12, Gloss-13
Command Language 5-4
MCR Operations 2-1

disk
selecting for testing
System Management 4-38

IOX

disk structure
testing for a
System Management 4-63

IOX

file
copying
FLX utility
PIP utility
protecting
PIP utility
verifying structure
file identifier processing
mag tape
naming convention
valid device
volume
bad block
entering
marking
directory
accessing
home block
modifying
initializing
level
mounting
owner
specifying
preparing
protecting
protecting with TEMPORARYFILE
!OX

Utilities 4-2
Utilities 3-8
Utilities 3-29
Utilities 9-1
I/O Operations G-6
MCR Operations 2-1
I/O Operations G-3
MCR Operations 2-1
MCR Operations 3-78
MCR Operations 3-77
MCR Operations 3-72, 3-82, 3-121
MCR Operations 3-71
MCR Operations 3-76
MCR Operations 3-82
MCR Operations 3-114
MCR Operations 3-83 to 3-84
MCR Operations 2-1
MCR Operations 3-84, 3-123
System Management 4-61

volume exercise
example of
IOX

System Management 4-9

Files-11 ACP
See FCP
FILESll command
!OX

default parameters
Fileset-ID
Filespec
See also File specification
Filespec qualifier
Fill characters option
vertical
Fi 11 command
FILL command (nokeypad)
FILL function (keypad)
Fi 11 memory
Fill number
data bucket
See DFL field in KEY block
index bucket
See !FL field in KEY block
RMSCNV utility
RMSDEF utility

System Management 4-38
Command Language 5-12, 5-28, 5-38
to 5-40
Command Language 4-2 to 4-3
Introduction Gloss-15, Gloss-27
MCR Operations 3-181
System Management 10-50
MCR Operations 3-206
System Management 10-64
ODT 2-9, 6-4
EDT Editor 8-11
EDT Editor 5-49
ODT 6-4

RMS-11 Utilities 4-10
RMS-11 Utilities A-16
Index-114

MASTER INDEX
Fill number (Cont.)
RMSIFL utility
Fill size
See Bucket fill number
<FILSPC> symbol
FIN argument to ORG$ macro
.FIND
effects of NB.ANS
wildcard operations
FIND command
EDI editor
EDT
FIND function {keypad)
$FIND macro
key access
RFA access
sequential access
FIND operation

MCR Operations 4-13
RMS-11 Macros 2-3
I/O Operations 4-13 to 4-14
I/O Operations 4-15
I/O Operations 4-13
EDT Editor 7-8
Utilities 2-33
Introduction 2-13
EDT Editor 5-21

access modes
and bucket locking
and shared access
and stream records
declaring with ORG$ macro
deferred write
$FIND macro
key access
RFA access
sequential access
indexed files
key access
random by key
RFA access
sequential access
key access
relative files
key access
RFA access
sequential access
RFA access
sequential access
sequential files
key access
RFA access
sequential access
FIND statement
Finding text
keypad editing
1 ine editing
nokeypad editing
FINIT$ macro
format
FINLMl

RMS-11 Macros 5-51
RMS-11 Macros 5-54
RMS-11 Macros 5-49
RMS-11 User's Guide 7-3
RMS-11 User's Guide 7-3
RMS-11 User's Guide 5-13
RMS-11 User's Guide 7-3
RMS-11 User's Guide 5-17, 7-3
RMS-11 User's Guide 1-16
RMS-11 User's Guide 4-8
RMS-11 User's Guide 4-8
RMS-11 User's Guide 4-8
RMS-11 User's Guide 4-8
RMS-11 User's Guide 1-16
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-7
RMS-11 User's Guide 3-7
RMS-11 User's Guide 3-7
RMS-11 User's Guide 3-7
Error Logging 5-39

FIS

FIX command
VMR
/FIX keyword
INSTALL command
VMR
FIX-IN-MEMORY command
command line format
error message
example
VMR

RMS-11 Utilities 3-6

Macros 5-51
RMS-11 Macros 5-54
RMS-11 Macros 5-49
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-10
RMS-11 Introduction 4-6
RMS-11 User's Guide 2-8
RMS-11 User's Guide 2-6, 2-10
RMS-11 User's Guide 2-16
RMS-11 Macros 2-3
RMS-11 User's Guide 7-9
R~S-11

EDT Editor 5-21
EDT Edi tor 7-8
EDT Editor 8-4
I/O Operations 2-39
I/O Operations 2-39
Error Logging 4-6
System Generation (llM) 4-13
Command Language 7-35 to 7-37,
9-16
MCR Operations 3-53
System Management 10-18
System Management 10-22
MCR Operations 3-53
MCR Operations 3-53
MCR Operations 3-54
MCR Operations 3-54
System Management 10-18
Index-115

MASTER INDEX
FIX-IN-MEMORY command
VMR (Cont.)
command line format
example
Fixed and removable, single
spindle disk
Fixed control area
RMSDEF utility
Fixed length record
mag tape
Fixed line number
assigning
description
display
example
Fixed task
ODT
Fixed-control-size
See FSZ field in FAB
Fixed-length record format

System Management 10-18
System Management 10-19
I/O Drivers 5-4A
RMS-11 Utilities A-8
I/O Operations 1-4
I/O Operations 1-4
EDT Editor 1-7, 6-3
EDT Editor 6-1
EDT Editor 6-1
EDT Editor 6-4
EDT Editor 6-5
ODT 5-7
RMS-11 Introduction 3-2
RMS-11 User's Guide 1-11, 2-15

See also FB$FIX code in RFM field
/FL switch
PRI command
Batch and Queue 2-5
FLA command
MCR Operations 3-55
command line format
MCR Operations 3-55
error message
MCR Operations 3-56
example
MCR Operations 3-55
keyword
/CRE
MCR Operations 3-55
/ELIM
MCR Operations 3-55
Flag
event
Executive 2-2
group global event
MCR Operations 3-55
creating
MCR Operations 3-55
displaying
MCR Operations 3-55
eliminating
MCR Operations 3-55
status
task
Command Language 7-48
task status
displaying
MCR Operations 3-19
list
MCR Operations 3-20
/FLAG PAGE qualifier
PRINT command
Batch and Queue 2-5
FLG field in KEY block
CREATE operation
RMS-11 Macros 5-19
DISPLAY operation
RMS-11 Macros 5-31
offset
RMS-11 Macros 6-67
OPEN operation
RMS-11 Macros 5-80
summary
XB$CHG mask
RMS-11 Macros 6-76
XB$DUP mask
RMS-11 Macros 6-77
XB$NUL mask
RMS-11 Macros 6-78
Floating instruction set
See FIS
Floating Point Processor
specifying
Task Builder 10-18
See also FPll
Floating qualifier
Command Language 1-3 to 1-5
Floating-po int
directive
PDP-11 MACR0-11 6-35
.FLT2
PDP-11 MACR0-11 6-35
.FLT4
PDP-11 MACR0-11 6-35
number
PDP-11 MACR0-11 6-33 to 6-34
operation code
PDP-11 MACR0-11 C-4 to C-5
processor
PDP-11 MACR0-11 3-14
Index-116

MASTER INDEX
Floating-point (Cont.)
rounding
controlling
truncation
controlling
unary operator
.FLT2 directive
.FLT4 directive
$FLUSH macro
FLUSH operation
$FLUSH macro
indexed files
record stream
relative files
sequential files
FLX
changes to
FLX utility
cassette
input file
multivolume support
output file
TA11/TU60 support
command line
device support
DOS-11 volume
deleting
directory listing
initializing
valid
error message
file
deleting
Files-11
specifying
FORTRAN direct access file
paper tape support
RT-11 volume
deleting
directory listing
initializing
valid
switch
control
transfer mode
volume format
volume
directory listing
file deletion
file transfer
formatting
in it i a li z i ng
wildcard
Flying installs
FMlNMl
FMlWMl
FM2CM1
FM3CM1
FM4NM1
FM4WM1
<FMASK> symbol
FMT utility
command line
device support
error message
indirect command file

PDP-11 MACR0-11 6-34
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 6-34
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 6-35 to 6-36
PDP-11 MACR0-11 6-35
PDP-11 MACR0-11 6-35
RMS-11 Macros 5-56
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 5-56
RMS-11 User's Guide 7-5
RMS-11 Macros 4-8
RMS-11 User's Guide 4-10
RMS-11 User's Guide 3-9
Release Notes 1-35
Command Language 5-12
Utilities 4-13
Utilities 4-15
Utilities 4-14
Utilities 4-14
Utilities 4-13
Utilities 4-2
Utilities 4-2
Utilities 4-8
Utilities 4-10
Utilities 4-8
Utilities 4-10
Utilities 4-1
Utilities 4-1 7
Utilities 4-7
Utilities 4-2
Utilities 4-2
Utilities 4-16
Utilities 4-15
Utilities 4-10
Utilities 4-12
Utilities 4-10
Utilities 4-12
Utilities 4-2
Utilities 4-3
Utilities 4-6
Utilities 4-4
Utilities 4-4
Utilities 4-7
Utilities 4-7
Utilities 4-4
Utilities 4-4
Utilities 4-2
Utilities 4-3
System Management 12-3
Error Logging 4-11
Error Logging 4-6, 4-11
Error Logging 4-6, 4-11
Error Logging 4-6, 4-11
Error Logging 4-6
Error Logging 4-6, 4-11
MCR Operations 4-13
Command Language 5-10, 5-12
Utilities 5-1

Utilities 5-5
Utilities 5-10

Utilities 5-9
Index-117

MASTER INDEX
FMT utility (Cont.)
initiating
operation mode
switch
summary
terminating
FMTBUF option
FMTNPl
FNlNMl
FNA field in FAB
CREATE operation
ENTER operation
ERASE operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
summary
SFNAM
predefined syntax element in
MML
FNB field in NAM block
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
NB$WCH mask
wildcard loop
FNDNXT function
repeating
$FNDPG (Find page)
$FNERL
FNS field in FAB
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
summary
/FO job switch
QUE /MOD command
/FO keyword
QUE /SP command
MCR
/FO switch
PIP utility
PRI command
QUE /LI command
RMSCNV utility
FOP field in FAB
CLOSE operation
CREATE operation
ENTER operation

ERASE operation
EXTEND operation

Utilities 5-1
Utilities 5-2
Utilities 5-7
Utilities 5-1
Utilities 5-2
Task Builder 11-16
Error Logging 4-7
Error Logging 4-6
RMS-11 Macros 3-3
RMS-11 Macros 5-10
RMS-11 Macros 5-36
RMS-11 Macros 5-41
RMS-11 Macros 6-24
RMS-11 Macros 5-73
RMS-11 Macros 5-87
RMS-11 Macros 5-103
RMS-11 Macros 5-109 to 5-110
RMS-11 Macros 6-38
System Management 12-44
RMS-11 Macros 3-3, 3-9 to 3-10
RMS-11 Macros 5-21
RMS-11 Macros 5-37 to 5-38
RMS-11 Macros 5-41, 5-43
RMS-11 Macros 6-94
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-103, 5-105
RMS-11 Macros 5-109, 5-111 to
5-112
RMS-11 Macros 5-116, 5-118
RMS-11 Macros 6-101
RMS-11 Macros 6-102
RMS-11 Macros 3-10
EDT Editor 5-23
EDT Editor 5-24
System Library 8-27
Error Logging 4-22
RMS-11 Macros 3-3
RMS-11 Macros 5-10
RMS-11 Macros 5-36
RMS-11 Macros 5-41
RMS-il Macros 6-24
RMS-11 Macros 5-73
RMS-11 Macros 5-87
RMS-11 Macros 5-103
RMS-11 Macros 5-109 to 5-110
RMS-11 Macros 6-39
Batch and Queue 2-20
System Management 7-17
Utilities 3-11
Batch and Queue 2-5
Batch and Queue 2-16
RMS-11 Utilities 4-9, 4-15
RMS-11 Macros 3-7, 3-9 to 3-11
RMS-11 Macros 5-4
RMS-11 Macros 5-10 to 5-11, 5-15,
5-18
RMS-11 Macros 5-36
RMS-11 Macros 5-41
RMS-11 Macros 5-46
Index-ll8

MASTER INDEX
FOP field in FAB (Cont.)
offset
OPEN operation

RMS-11 Macros 6-23
RMS-11 Macros 5-73 to 5-74, 5-76
~-

l...V

REMOVE operation
RENAME operation
SEARCH operation
summary
FB$CTG mask
FB$DFW mask
FB$DLK mask
FB$FID mask
FB$MKD mask
FB$NEF mask
FB$POS mask
FB$RWC mask
FB$RWO mask
FB$SUP mask
FB$TMP mask
FOR
range specification
FOR command
MCR
FOR compiler task
creating object module
/D LINES
/DE
debugging statements
diagnostic run
FOR command
MCR
FORTRAN command
DCL
• FTN file type
/LIST
/NOOBJECT
/OBJECT
/FOR keyword
MOUNT command
<FORATT> symbol
Foreign volume
FORK
Fork block
storage words in SCB
Fork level
Fork level processing
Fork list
Fork process
creating with $FORK
$FORK routine
accessing shared driver data
base
initiating fork process
$FORK1 routine
Form
special hardcopy
Form feed
hardware
specifying
PAGE
FORM FEED command
EDI editor
FORMAT
RMSDES utility

., 0

J-1u

RMS-11 Macros 5-103
RMS-11 Macros 5-109 to 5-110
RMS-11 Macros 5-117
RMS-11 Macros 6-40
RMS-11 Macros 6-41
RMS-11 Macros 6-42
RMS-11 Macros 6-43
RMS-11 Macros 6-44
RMS-11 Macros 6-45
RMS-11 Macros 6-46
RMS-11 Macros 6-47
RMS-11 Macros 6-48
RMS-11 Macros 6-49
RMS-11 Macros 6-50
EDT Editor 6-10
Program Development 7-1, 7-4
Program Development 7-1
Program Development 7-5
Program Development 7-7
Program Development 7-7
Program Development 7-7
Program Development 7-3 to 7-4
Program Development 7-1, 7-4
Program Development 7-1, 7-3
Program Development 7-3 to 7-4
Program Development 7-3, 7-7
Program Development 7-3
Program Development 7-3, 7-7
MCR Operations 3-120
MCR Operations 4-11
Command Language 5-9 to 5-10,
5-12 to 5-13, 5-26, 5-29
Crash Dump Analyzer 4-2
Writing I/O Driver 4-23
Executive 5-18
Writing I/O Driver 2-15
Writing I/O Driver 2-9
Writing I/O Driver 2-9
Writing I/O Driver 2-12
Writing I/O Driver 5-10
Writing I/O Driver 2-10
Writing I/O Driver 2-9
Writing I/O Driver 5-11
Batch and Queue 1-2
Introduction Gloss-15
MCR Operations 3-180
System Management 10-50
EDT Editor 5-20
Utilities 2-34
RMS-11 Utilities 2-36
Index-119

MASTER INDEX
Format
See also Record format
assembler listing
control directive
line printer
teleprinter
assembler statement
control
FORTRAN IV
statement
macro definition
MACR0-11
source file
skeleton
statement
memory listing
register
source 1 ine
Trace listing
Format control
vertical
line printer
terminal
Format module
Format switch
full report
no report
Register report
Formatting volume
FLX utility
FMT utility
/FORMFEED keyword
SET command

VMR
Forms
definition
/FORMS job qualifier
SET QUEUE command
/FORMS qualifier
INITIALIZE/PROCESSOR command
DCL
PRINT command
QUE /LI command
FOROTS.OLB (FORTRAN IV and
FORTRAN IV-PLUS library)
FORTRAN
See also ISA
AST service routine
common block
in overlays
directives not available
manual load calling sequence
for I- and D-space task
operations forbidden at AST
state
run-time support
virtual program section
FORTRAN command
DCL
FORTRAN IV

PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11

6-4
6-13 to 6-14
6-5 to 6-6
6-7 to 6-8
2-1
2-5

Program Development 7-3
PDP-11 MACR0-11 7-4
Program Development 2-1 to 2-3
Program Development 2-4
Program Development 2-3
ODT 6-5
ODT 2-6, 5-3
PDP-11 MACR0-11 2-5
ODT 8-2
I/O Drivers 10-5 to 10-6
I/O Drivers 3-26 to 3-27
Error Logging 4-11
Error Logging 3-5
Error Logging 3-15
Error Logging 3-19
Error Logging 3-18
Utilities 4-4
Utilities 5-1
MCR Operations 3-180
System Management 10-50
Batch and Queue Gloss-4
Batch and Queue 2-20
System Management 7-17
Batch and Queue 2-5
Batch and Queue 2-16

Program Development 1-11
Introduction 4-12
Executive 1-8
Task Builder 3-19
Executive 1-7
Task Builder 4-9 to 4-10
Task Builder 4-11
Executive 1-8 to 1-9
Task Builder 5-56 to 5-57
Introduction 4-13
Command Language 6-2, 6-13 to
6-20, 9-16
Program Development 7-1, 7-3
Command Language 6-13 to 6-20,
9-16

See also FOR compiler task
,.."'-ft'\1""\.;1.0.w¥Villt'.&._.,...._

.... ~r-1.r

'-Q.;:J"'

formatting source statements
library

Program Development 7~1
Program Development 7-3
Program Development 1-11
Index-120

MASTER INDEX
FORTRAN IV (Cont.)
source file
blank line
comment line
specifying OTS to TKB
FORTRAN IV-PLUS

Program Development 7-3
Program Development 7-3
Program Development 7-5
Command Language 6-13 to 6-20,
9-16
Program Development 1-11

library
FORTRAN OTS
system object library
FORTRAN programs
increasing FSR size
FORTRAN-77

System Generation {llS) 4-12
I/O Operations 2-41
Command Language 6-13 to 6-20,
9-16

FORTRAN-IV-PLUS language
processor
FORTRAN-style carriage control
See FB$FTN mask in RAT field
Forward reference
Four-byte signed integer key
Four-byte unsigned binary key
/FP switch
FPll
/FPRO keyword
HOME command
!NI command
MOUNT command
FPT symbolic argument
/FR switch
PIP utility
RMSRST utility
VFY utility
Fragment
pool

EDT Editor 6-4
PDP-11 MACR0-11 3-8 to 3-10, 3-13
RMS-11 User's Guide 6-4
RMS-11 User's Guide 6-5
Task Builder 10-18
System Generation (llM) 4-13
MCR Operations 3-72
MCR Operations 3-80
MCR Operations 3-120
PDP-11 MACR0-11 6-19
Utilities 3-23
RMS-11 Utilities 7-7
Utilities 9-5
System Management 13-2 to 13-5,
13-13

Fragmentation
pool

System Management 13-1 to 13-5,
13-7 to 13-10, 13-12 to 13-13

FREE command
RMD
$FREE macro
FREE operation
and shared access
block stream
$FREE macro
record stream
Free-space list for pool
$FSEP
predefined syntax element in
MML
FSR
calculating length
changing the size of
definition of
initializing
number of block buff er headers
number of block buffers
FSR size
for command file
$$FSR1
FSR program section
reserved PSECT name
$$FSR2
.FSRPT
low-memory context

System Management 6-8
RMS-11 Macros 5-58
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 2-10
RMS-11 Macros 4-13
RMS-11 Macros 5-58
RMS-11 Macros 4-9
RMS-11 Macros 2-19
System Management 12-44
I/O Operations
I/O Operations
I/O Operations
I/O Operations
I/O Operations
I/O Operations

2-40
1-3
1-11
2-36, 2-39
1-2
1-2

I/O Operations 6-13
I/O Operations 1-2
I/O Operations 2-40
Task Builder E-3
I/O Operations 1-2, 4-2, 4-4 to
4-5
Task Builder B-10

Index-121

MASTER INDEX
.FSRPT (Cont.)
reserved global symbol
FSRSZ$
FSRSZ$ macro
format
parameters
FSZ field in FAB
CREATE operation
off set
OPEN operation
summary
FTB
FTB library
overlaid reg ion
• FTN file type
See also FOR compiler task
/FU switch
LBR utility
PIP utility
QUE /LI command
RMSDSP utility
Full format report
context information
device error
device supplied information
* flag
I/O operation
/FULL qualifier
SHOW QUEUE command
Full-duplex option
Function
control key
how to redefine
Function commands

Task Builder E-1
I/O Operations 2-37
I/O Operations 2-36
I/O Operations 2-37
I/O Operations 2-37
RMS-11 Macros 5-11
RMS-11 Macros 6-24
RMS-11 Macros 5-78
RMS-11 Macros 6-51
Program Development 4-4
Task Builder 5-13
Program Development 7-3 to 7-4
Task Builder 10-19
Utilities 10-21
Utilities 3-25
Batch and Queue 2-15
RMS-11 Utilities 5-2, 5-4
Error Logging 3-15
Error Logging 1-5
Error Logging 1-5
Error Logging 1-5
Error Logging 1-5
Error Logging 1-5
Batch and Queue 2-15
MCR Operations 3-179
System Management 10-49
EDT Editor 5-5
EDT Editor 10-1

IOX

as a category
Function directive, assembler
Function key
Function mask word
See I/O function mask
Functionality

System Management 4-3
PDP-11 MACR0-11 6-18 to 6-22
EDT Editor 5-1
Introduction 2-2

G
G command
ODT
G register
/GBL keyword
ASSIGN command

VMR
GBL symbolic argument
GBLDEF option
GBLINC option
GBLPAT option
See also TKB
GBLREF option
GBLXCL option
GCCI$
GCII$
GCML
run-time calls
usage considerations
GCML control block
offsets

ODT 2-9, 3-2
Program Development 5-6, 5-8
ODT 2-7, 5-4
MCR Operations 3-17
System Management 10-9
PDP-11 MACR0-11 6-21, 6-41
Task Builder 11-17
Task Builder 11-18
Task Builder 11-19
Task Builder 11-20
Task Builder 11-21
Executive 5-75
Executive 5-79
I/O Operations 6-1 to 6-13
I/O Operations 6-9
I/O Operations 6-13
I/O Operations 6-3
I/O Operations 6-6 to 6-9

Index-122

MASTER INDEX
GCML control block (Cont.)
referencing
GCML$
GCMLB$
GCMLD$
General Information Directive
General register
Generic match
GET argument to ORG$ macro
GET command
RMSDES utility
PROTECTION attribute
with SAVE
Get Command for Command
Interpreter directive
Get Command Interpreter
Information directive
Get LUN Information directive
$GET macro
key access
RFA access
sequential access
Get Mapping Context directive

I/O Operations 6-9
I/O Operations 6-9 to 6-11
I/O Operations 6-4 to 6-5
I/O Operations 6-6 to 6-9
Executive 1-12
ODT 5-2
RMS-11 Introduction 3-12
RMS-11 Macros 2-3
RMS-11 Utilities 2-10, 2-17, 2-24
RMS-11 Utilities 2-33
RMS-11 Utilities 2-28
Executive 5-75
Executive 5-79
Executive 5-81

Get MCR Command Line directive
Get Multiple Characteristics
GET operation
access modes
and bucket locking
and ODLs
and shared access
and stream records
declaring with ORG$ macro
deferred write
$GET macro
key access
RFA access
sequential access
indexed files
key access
random by key
RFA access
sequential access
key access
locate mode
indexed files
relative files
move mode
indexed files
relative files
sequential files
relative files
key access
RFA access
sequential access
RFA access
sequential access
sequential files
key access
RFA access
sequential access
Get Partition Parameters
directive
Get Region Parameters directive
Get Sense Switches directive

RMS-11 Macros 5-63
RMS-11 Macros 5-67
RMS-11 Macros 5-60
System Generation (llM) 4-25
Executive 5-86
Executive 5-84
I/O Drivers 2-13
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-10
RMS-11 Introduction 4-6
RMS-11 user's Guide 2-8
RMS-11 User's Guide 8-5
RMS-11 User's Guide 2-6, 2-10
RMS-11 user's Guide 2-16 to 2-17
RMS-11 Macros 2-3
RMS-11 User's Guide 7-9
RMS-11 Macros 5-63
RMS-11 Macros 5-67
RMS-11 Macros 5-60
RMS-11 User's Guide 7-5, 7-9
RMS-11 User's Guide 7-5
RMS-11 User's Guide 5-13
RMS-11 User's Guide 7-5
RMS-11 User's Guide 5-17, 7-5
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-14
RMS-11 User's Guide 7-8
RMS-11 User's Guide 4-13
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 7-7
User's Guide 4-12
User's Guide 3-13
User's Guide 4-10
user's Guide 4-10
User's Guide 4-10
User's Guide 4-10
User's Guide 1-16
User's Guide 1-16
User's Guide 3-9
User's Guide 3-9
User's Guide 3-9
R"1S-ll user's Guide 3-9
Executive 5-89
Executive 5-91
Executive 5-93

Index-123

MASTER INDEX
Get Task Parameters directive
Get Time Parameters directive
GET$
FDB
locate mode
move mode
GET$ macro call
format
parameters
GET$R
GET$R macro call
format
parameters
GET$S
Get-space routine
example
macro
declaring
RMS-11-suppl i ed
GETADR
$GETGSA macro
GFB
Global
additive relocation
relocation
additive displaced
displaced
symbol
address of ODT SST routine
ambiguously defined in
overlay
declaration directory record
directory record format
end of directory record
from the default library
in autoloadable segment
in cross-reference listing
multi plydef ined
multisegment task
name
name entry
overlay search sequence
resolution
search sequence in overlays
undefined
symbol resolution
co-tree
default 1 ibrary
in multisegment task
GLOBAL argument
Global cross-reference
listing
Global default
disabling in MACR0-11
Global event flags
group
Global expression evaluation
Global label
$USRTB
$xxDAT
$xxEND
$xxTBL
Global reference
Global switch
RMSBCK utility
RMS IFL utility

Executive 5-97
Executive 5-95
I/O Operations 3-20
I/O Operations 3-18
I/O Operations 3-18, 3-21
I/O Operations 3-19
I/O Operations 3-19
I/O Operations 3-22
I/O Operations 3-22
I/O Operations 3-23
I/O Operations 3-24
RMS-11 Macros 2-18
RMS-11 Macros 7-18
RMS-11 Macros C-2
RMS-11 Macros 2-4
Executive 1-7
RMS-11 Macros 2-19
Executive 5-40, 5-60
Introduction Gloss-15
Task Builder A-16
Task Builder A-15
Task Builder A-17
Task Builder A-16
Task Builder 11-24
Task Builder 3-16
Task Builder A-2
Task Builder A-4
Task Builder A-11
Task Builder 3-18
Task Builder 4-4, 4-6
Task Builder 10-12 to 10-13
Task Builder 3-16
Task Builder 3-16
Task Builder A-6
Task Builder A-6
Task Builder 3-17
Task Builder 2-7
Task Builder 3-16
Task Builder 2-7
Task Builder 3-17
Task Builder 3-18
Task Builder 3-16
PDP-11 MACR0-11 8-9
Program Development 4-5 to 4-6
Program Development 3-1 to 3-2
Command Language 6-91 to 6-92,
9-32, 9-38
PDP-11 MACR0-11 3-17
PDP-11 MACR0-11 6-49
Writing I/O Driver 3-13
Writing I/O Driver 3-9
Writing I/O Driver 3-9
Writing I/O Driver 4-10
PDP-11 MACR0-11 6-49
RMS-11 Utilities 6-5
RMS-11 Utilities 3-5

Index-124

MASTER INDEX
Global switch (Cont.)
RMSRST utility
Global symbol

RMS-11 Utilities 7-5
Introduction 4-8, Gloss-15
PDP-11 MACR0-11 1-2, 3-7
Program Development 1-4 to 1-5
MCR Operations 4-3
PDP-11 MACR0-11 3-1 to 3-2, 3-8,
6-49

defining
definition
See also .GLOBL directive
deleting definition of
di rectory
entry point

MCR Operations 4-35
PDP-11 MACR0-11 1-2
Program Development 1-4, 6-5 to
6-6 I 6-10
PDP-11 MACR0-11 2-2
MCR Operations 4-32
Program Development 4-2, 6-8 to
6-9
PDP-11 MACR0-11 6-21

label as a
mode
resolution
undefined reference
using library to resolve
undefined
.GLOBL directive
GLUN$
A/D converter
card reader
cassette
DECtape
disk
DT07 UNIBUS switch
full-duplex terminal driver
graphic display driver
half-duplex terminal driver
ICS/ICR
laboratory peripheral system
line pr inter
LPAll-K
magnetic tape
message-oriented communication
device
paper tape
PCL
table of bits returned
TU58
UDCll
GMCR$
GMCX$
$GNCAL macro
Go command
GOLD
alternate function
description
example
instead of control key
repeat function
GOLD integer function
GOLD/A function
GOLD/D function
GOLD/E function
GOLD/T function
.GOSUB directive
example
format
.GOTO directive
example
format
GPRT$

Program Development 6-8 to 6-9
PDP-11 MACR0-11 3-7, 6-49
Executive 5-81
I/O Drivers 1-21
I/O Drivers 14-2
I/O Drivers 11-1 to 11-2
I/O Drivers 9-1 to 9-2
I/O Drivers 6-1 to 6-2
~/O Drivers 5-4A
I/O Drivers 23-2
I/O Drivers 2-6 to 2-7
I/O Drivers 20-1
I/O Drivers 3-4 to 3-5
I/O Drivers 18-8
I/O Drivers 16-2
!/O Drivers 10-2 to 10-3
I/O Drivers 21-2
I/O Drivers 8-3
I/O Drivers 12-4
I/O Drivers 17-1
I'/O Drivers 13-2
I/O Drivers 1-22 to 1-23
I/O Drivers 7-1 to 7-2
I/O Drivers 15-3
Executive 5-84
Executive 5-86
RMS-11 Macros C-2
ODT 2-9, 3-2
EDT Editor 5-5
EDT Editor 2-5, 5-7
EDT Editor 5-7
EDT Edi tor 5-53
EDT Editor 5-7
EDT Edi tor 5-7
EDT Editor 9-8
EDT Edi tor 9-8
EDT Edi tor 9-8
EDT Edi tor 9-8
MCR Operations 4-37
MCR Operations 4-37
MCR Operations 4-37
MCR Operations 4-37
MCR Operations 4-38
MCR Operations 4-38
Executive 5-89

Index-125

MASTER INDEX
Graphic display driver
device-specific QIO
standard QIO
status return
GREG$
/GRO keyword
HELP command
Group
global event flag
creating
displaying
eliminating
group
user
Group Global Event Flag Control
Block
See GFB
Group global event flag dump
Group global event flags
GROUP GLOBAL EVENT FLAGS command
Group Number Identification
definition
Group-global event flag
reading
GSA$ macro
example
GSSW$S
GT condition test argument
$GTBYT routine
$GTCOR (Get core)
.GTDID
.GTDIR
GTIM$
$GTPKT routine
in driver processing
use of
with ACP
GTSK$
$GTWRD routine
conditional assembly
incl us ion of
by SYSGEN
Guide to Writing an I/O Driver
Manual
note to

I/O Drivers 20-2
I/O Drivers 20-2
I/O Drivers 20-3
Executive 5-91
MCR Operations 3-65
MCR Operations 3-55
MCR Operations 3-55
MCR Operations 3-55
MCR Operations 3-55
MCR Operations 2-3
MCR Operations 2-3

Crash Dump Analyzer 1-6, 3-2,
3-18
Command Language 6-91 to 6-92,
9-32, 9-38
MCR Operations 3-55
System Management B-1
Executive 5-60
Executive 5-127
RMS-11 Macros 2-18
RMS-11 Macros 7-3, 7-7, 7-11,
7-15
Executive 5-93
PDP-11 MACR0-11 6-51
Writing I/O Driver 5-12
System Library 8-11
I/O Operations 3-15, 4-17
I/O Operations 3-15, 4-16
Executive 5-95
Writing I/O Driver 2-12, 5-13
Writing I/O Driver 2-17
Writing 1/0 Driver D-6
Executive 5-97
Writing 1/0 Driver 5-14
Writing I/O Driver 5-1
Writing I/O Driver 3-2
Release Notes 1-55

H
H register
Handler
device
See Device driver
Hang
Hard error
definition
Hard error limit switch
Hard location
See XB$HRD mask in AOP field
Hard receive error
detection
Hardcopy terminal
SET TERMINAL
SHOW TERMINAL

ODT 2-6, 5-3

Introduction Gloss-16
Error Logging 1-3
Error Logging 2-3, 2-7

I/O Drivers 2-36
EDT Editor 9-12
EDT Editor 9-17
Index-126

MASTER INDEX
Hardware
boot block
writing on system device
configuration
form feed option

Introduction Gloss-16
MCR Operations 3-159
System Generation (llS) 1-2
MCR Operations 3-180
System Management 10-50
MCR Operations 3-181
System Management 10-50
Program Development 1-12
Task Builder 10-20
Utilities 11-5
Utilities 9-5
Crash Dump Analyzer 2-2

horizontal tab option
program development
/HD switch
DMP utility
VFY utility
/HDR
/HDR3 keyword
MOUNT command
HDRDF$
Header
ex cl ud i ng task

MCR Operations 3-120
Crash Dump Analyzer B-20
Task Builder 2-8
Task Builder 10-20
Introduction 3-6, 4-8, Gloss-13

file

index
allocating
in task image
task
display in RMD
altering from MCR
fixed part
variable part
vector extension area
Header, page
/HEADERS qualifier
BRU utility
$HEADR pointer
use of
in fault tracing
HELLO command

MCR Operations 3-80
Task Builder B-10
System Management 6-10
System Management 6-11
Task Builder B-11
Task Builder B-12
Task Builder B-13
PDP-11 MACR0-11 6-4
Utilities 7-16

command line format
error message
example
time 1 imi t
HELP
as line editing command
function key
keypad editing
RMSBCK utility
RMSCNV utility
RMSDEF utility
RMSDES utility
RMSDSP utility
RMSIFL utility
RMSRST utility
sample description
use of facility
use of subtopic
used for keypad key description
Help
extracting a help file
library
HELP command

command line format
EDT
error message
example of help file
format

Writing 1/0 Driver 3-24
Introduction 1-5, Gloss-20
MCR Operations 3-57
MCR Operations 3-59
MCR Operations 3-62
MCR Operations 3-61
MCR Operations 3-59
EDT Editor 1-3, 7-9
EDT Editor 2-5, 5-7
EDT Editor 1-4, 2-5, 5-7
RMS-11 Utilities 6-4
RMS-11 Utilities 4-5
RMS-11 Utilities A-5
RMS-11 Utilities 2-2, 2-11
RMS-11 Utilities 5-3
RMS-11 Utilities 3-3
RMS-11 Utilities 7-3
EDT Editor 1-3
EDT Editor 1-3 to 1-4
EDT Editor 1-4, 7-9
EDT Editor 2-5
System Generation {llM) 6-7, 6-17
System Generation (llM) 6-7, 6-17
Introduction 1-12, Gloss-16
Command Language 1-5 to 1-6, 3-22
to 3-28, 9-17
MCR Operations 3-65
MCR Operations 3-65
Introduction 2-6
MCR Operations 3-69
MCR Operations 3-68
Command Language 3-28

Index-127

MASTER INDEX
HELP command {Cont.)
System Management 4-39

IOX

keyword
/CLI
/DCL
/FIL
/GRO
/LOC
/MCR
/OUT
/xxx
writing
Help file
calling other files
contents
displaying
default
example
format

MCR Operations 3-65
MCR Operations 3-65
MCR Operations 3-65
MCR Operations 3-65
MCR Operations 3-65
MCR Operations 3-66
MCR Operations 3-66
MCR Operations 3-66
Command Language 3-28
MCR Operations 3-67
MCR Operations 3-65
MCR Operations 3-65
MCR Operations 3-68
Command Language 3-26 to 3-27
MCR Operations 3-66
MCR Operations 3-66

level number
qualifier
synonymous
writing
HELP.ULB
HELPBUILD.CMD
/HF switch
DMP utility
/HFILL keyword
SET command
VMR
/HHT keyword
SET command
VMR
/HIGH keyword
/LOAD command
High-key value
buckets
High-level language

MCR Operations 3-67
Command Language 3-26 to 3-27
System Generation {llM) 6-7, 6-17
System Generation (llM) 6-8, 6-18
Utilities 11-6
MCR Operations 3-181
System Management 10-50
MCR Operations 3-181
System Management 10-50
MCR Operations 3-106

access streams
and file design
and ODL files
and remote access
and shared access
asynchronous operations
bucket fill size
bucket size
defaults
DEQ
file and directory operations
file operations
initial allocation
key characteristics
keys
locate mode
MRN
overlay program in
placement control
populating files
restrictions
/HL switch

RMS-11 User's Guide 5-5 to 5-6
Introduction 4-13, Gloss-16
RMS-11 Introduction 4-7, 5-1
RMS-11 User's Guide 1-15
RMS-11 User's Guide 1-19
RMS-11 User's Guide 8-5
RMS-11 User's Guide B-1
RMS-11 User's Guide 2-7
RMS-11 User's Guide 3-14, 4-14
RMS-11 User's Guide 6-29
RMS-11 User's Guide 4-3, 6-21
RMS-11 User's Guide 2-2
RMS-11 User's Guide 3-5, 4-4,
6-26
RMS-11 User's Guide 3-15, 4-15,
7-10
RMS-11 User's Guide 8-10
RMS-11 User's Guide 3-4, 4-4,
6-26
RMS-11 User's Guide 6-8
RMS-11 User's Guide 6-7
RMS-11 User's Guide 3-14, 4-13
RMS-11 User's Guide 4-5
Task Builder 3-39 to 3-40
RMS-11 User's Guide 6-14
RMS-11 User's Guide 6-26
RMS-11 User's Guide 1-13, 1-15,
2-1
Error Logging 2-3, 2-7

Index-128

MASTER INDEX
HLP macro
MML
/HO switch
PRI

COifimcHid

HOLD command
format
entry number
job name
/HOLD keyword
BYE command
SET command
/HOLD qualifier
PRINT command
Hold-screen mode option
HOLD/ENTRY command
HOLD/JOB command
HOLD SCREEN
VTS2
Home block
format
volume
HOME command
command line format
error message
example
keyword
/DENS
displaying
/EXT
/FPRO
/LRU
/MXF
/NAME
/OVR
/OWNER
/PRO
/UIC
/VI
/WIN

HOME utility
Host system
building a task for another
system
definition
transferring from task
HWDDF$
/HX switch
DMP utility
Hyphen (-)
See also ODL operator

I command
I error
summary
I register
I symbolic argument
I/O
and performance
and record operations
canceling request

System Management 12-31
Batch and Queue 2-4
Batch and Queue 2-22
Batch and Queue 2-22
MCR Operations 3-31
MCR Operations 3-182
Batch and Queue 2-4
MCR Operations 3-182
Command Language 9-17
Command Language 9-18
Introduction 1-16
I/O Operations E-2
I/O Operations E-3
Command Language 5-11, 5-47 to
5-59, 9-18, 9-20
MCR Operations 3-71
MCR Operations 3-71
MCR Operations 3-75
MCR Operations 3-74
MCR Operations 3-71
MCR Operations 3-74
MCR Operations 3-72
MCR Operations 3-72
MCR Operations 3-72
MCR Operations 3-73
MCR Operations 3-73
MCR Operations 3-73
MCR Operations 3-73
MCR Operations 3-73
MCR Operations 3-74
MCR Operations 3-74
MCR Operations 3-74
Command Language 5-57 to 5-59,
9-20
System Generation {llS) 1-2
Task Builder C-1
Task Builder C-1
System Generation {llM) 1-6
Task Builder C-1
Crash Dump Analyzer B-22
Utilities 11-6
Command Language 3-16

EDT Editor 8-12
ODT 2-9
PDP-11 MACR0-11 6-26, 6-28 to
6-29
PDP-11 MACR0-11 D-3
ODT 2-7, 5-4
PDP-11 MACR0-11 6-41
RMS-11 Introduction 2-1
RMS-11 User's Guide 2-3
RMS-11 User's Guide 5-17
I/0 Drivers 1-27
Index-129

MASTER INDEX
I/O (Cont.)
completion
data structures
changes to
function code
summary
issuing request
logical
packet
maximum number
specifying
page
overmapping
paging operations
physical
request
redirecting
status block
status code
summary
status condition
table
virtual
window turning
I/O buffer

I/O Drivers 1-32
Release Notes 1-33
I/O Drivers B-1
I/O Drivers 1-16
I/O Drivers 1-2
MCR Operations 3-188
MCR Operations 3-95, 3-153
RMS-11 User's Guide 8-10
I/O Drivers 1-2
MCR Operations 3-144
I/O Drivers 1-11, 1-35
I/O Drivers 1-33
I/O Drivers B-1

application design
remote access
indexed files
relative files
sequential files
I/O buff er pool
I/O control blocks
interrelationship
I/O counts
display in RMD
I/O data structure
See also System data structure
macro definition
See also Data structure
I/O device
See Device
I/O driver
See also Driver
size
I/O Drivers Reference Manual
note to
technical changes
I/O error code
I/O error report

I/O Drivers 1-36 to 1-38
I/O Drivers 1-2
RMS-11 User's Guide 8-11
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-14
RMS-11 User's Guide 2-5
RMS-11 User's Guide B-3
RMS-11 User's Guide B-3
RMS-11 User's Guide B-3
RMS-11 User's Guide B-3
RMS-11 Macros 2-6
Writing I/O Driver 2-6
System Management 6-12

System Generation (llS) 1-3
Release Notes 1-50
Release Notes 1-16
I/O Operations I-1 to I-12
System Management 4-21

!OX

I/O exercise
steps
termination
I/O function code

System Management 4-2
System Management 4-23
I/O Operations I-2, I-5, I-9,
I-12
I/O Operations I-1, I-3 to I-4,
I -6 to I -8 , I -1 0 to I -11

I/O function mask
ACP
control
creating
legal
no-op
values for d1s1< drive
values for mag tape drive
values for standard functions

Writing I/O Driver 4-12
Writing I/O Driver 4-12
Writing I/O Driver 4-13
Writing I/O Driver 4-12
Writing I/O Driver 4-12
Writing I/O Driver 4-16
Writing I/0 Driver 4-17
Writing I/O Driver 4-15

Index-130

MASTER INDEX
I/O function mask (Cont.)
values for unit record device
I/O hierarchy
I/O initiator entry point
DDT conditions
I/O operations
event flag use
I/O Operations Reference Manual
note to
I/O error codes
MTTACP
RMS-11 support
I/O packet
description
format
pointer in SCB
with ACP
I/O packet field
I.AST
I.EFN
I. FCN
I. IOSB
I. LNK
I.PR!
I.PRM
I.TCB
I.UCB
I/O packets
pre-allocated
I/O page
direct access
overmapping
specifying
I/O philosophy
I/O processing
ACP
QIO directive
I/O queue
I/O related directive
summary
I/O request
flow
red i rec ting
I/O rundown
I/O status block
K-series
LPAll-K
parameter to FDBK$A
READ$ operations
second word
status codes
I/O technique
asynchronous operations
deferred write
indexed files
asynchronous operations
deferred write
multiple access streams
multiple buffers
sequential reads
mass insertion
MBC
multiple access streams
multiple buffers
relative files
asynchronous operations
deferred write

Writing
Writing
Writing
Writing

I/O Driver 4-18
I/O Driver 2-1
I/O Driver 2-4, 2-12
I/O Driver 4-10

I/O Operations 2-42
Release Notes 1-50
Release Notes 1-54
Release Notes 1-50
Release Notes 1-52
Writing I/O Driver 2-8
Wr~t~ng I/O Driver 4-2
Wr1t1ng I/O Driver 4-3
Writing I/O Driver 4-21
Writing I/O Driver D-7
Writing I/O Driver 4-5
Writing I/O Driver 4-3
Writing I/O Driver 4-4
Writing I/O Driver 4-4
Writing I/O Driver 4-2
Writing I/O Driver 4-3
Writing I/O Driver 4-5
Writing I/O Driver 4-4
Writing I/0 Driver 4-4
System Generation (llM) 4-37
System Generation (llS) 4-13
System Management 10-22
Task Builder 10-22
Writing I/O Driver 2-1
System Generation (llS) 2-23
Writing I/O Driver 2-3
Writing I/O Driver 2-3
Writing I/O Driver 2-9
I/O Operations C-2 to C-3
Writing I/O Driver 2-16 to 2-17
System Management 10-33
System Generation (llM) 4-26
I/O Operations 2-43
I/O Drivers 22-32
I/O Drivers 21-30 to 21-32
I/O Operations 2-12
I/O Operations 2-43
I/O Operations 2-43
I/O Operations 2-44
RMS-11 User's Guide 2-17
RMS-11 User's Guide 2-17
RMS-11 User's Guide 2-17
RMS-11 User's Guide 7-8
RMS-11 User's Guide 7-8
RMS-11 User's Guide 7-8
RMS-11 User's Guide 7-10
RMS-11 User's Guide 7-9
RMS-11 User's Guide 7-10
RMS-11 User's Guide 2-18
RMS-11 User's Guide 2-17
RMS-11 User's Guide 2-17
RMS-11 User's Guide 2-18
RMS-11 User's Guide 4-14
RMS-11 User's Guide 4-14
RMS-11 User's Guide 4-14

Index-131

MASTER INDEX
I/O technique
relative files (Cont.)
multiple access streams
multiple buffers
sequential files
asynchronous operations
deferred write
MBC
multiple access streams
multiple buffers
I/O unit
blocks
buckets
I/O-related directive
summary
IAN field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
!AS
linking
debugger
ODT
!AS system prompts and CL!
<IAS> symbol
IBM magtape
reading
!BS field in KEY block
DISPLAY operation
offset
OPEN operation
summary
!CB
• !CF module
ICS/ICR
address assignment
configuration
device-specific QIO
direct access
error recovery
FORTRAN interface
list of supported module
standard QIO
/ID switch
DMP utility
FLX utility
PIP utility
RMSBCK utility
RMSCNV utility
RMS DEF utility
RMSDSP utility
RMSIFL utility
RMSRST utility
IDB pool
.!DENT directive
ION condition test argument
!DX argument to ORG$ macro
• IF directive
condition test argument
example
format
IF-THEN-ELSE statement
IFAB pool

RMS-11 User's Guide 4-15
RMS-11 User's Guide 4-15
RMS-11 User's Guide 3-14
RMS-11 User's Guide 3-14
RMS-11 User's Guide 3-14
RMS-11 User's Guide 3-15
RMS-11 User's Guide 3-15
RMS-11 User's Guide 3-14
RMS-11 User's Guide 1-14
RMS-11 User's Guide 1-16
RMS-11 User's Guide 1-16
I/O Operations C-1
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-19
5-31
6-67
5-80
6-79

ODT 8-2
ODT 1-3
EDT Editor 2-3
MCR Operations 4-9
I/O Operations G-18 to G-19
RMS-11 Macros 5-31
RMS-11 Macros 6-68
RMS-11 Macros 5-80
RMS-11 Macros 6-80
Writing I/O Driver 3-2, 4-35
Error Logging 4-1
I/O Drivers 18-1
I/O Drivers 18-2
I/O Drivers 18-7
I/O Drivers 18-8 to 18-12
I/O Drivers 18-75 to 18-80
I/O Drivers 18-71
I/O Drivers 18-35 to 18-70
I/O Drivers 18-3
I/O Drivers 18-8 to 18-12
Utilities 11-6
Utilities 4-7
Utilities 3-2 3
RMS-11 Utilities 6-4 to 6-5
RMS-11 Utilities 4-5, 4-9
RMS-11 Utilities A-5
RMS-11 Utilities 5-3, 5-5
RMS-11 Utilities 3-3, 3-5
RMS-11 Utilities 7-3, 7-5
RMS-11 Macros 2-5
PDP-11 MACR0-11 6-16 to 6-17
Program Development 2-5
PDP-11 MACR0-11 6-52
RMS-11 Macros 2~3
PDP-11 MACR0-11 6-51 to 6-55
MCR Operations 4-38
PDP-11 MACR0-11 6-51 to 6-52
MCR Operations 4-39
MCR Operations 4-38
Error Logging 5-34
RMS-11 Macros 2-5
Index-132

MASTER INDEX
.!FACT directive
example
format
.IFDF directive
example
format
.IFDISABLED directive
format
.IFENABLED directive
format
.IFF directive
example
format
IFI field

MCR Operations 4-39
MCR Operations 4-39
MCR Operations 4-39
MCR Operations 4-39
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
PDP-11 MACR0-11 6-53 to 6-55
MCR Operations 4-41
MCR Operations 4-41
MCR Operations 4-41

FAB

CLOSE operation
CONNECT operation
CREATE operation
DISPLAY operation
EXTEND operation
offset
OPEN operation
summary
$!FIL
predefined syntax element in
MML
$!FILE
predefined syntax element in
MML
.!FINS directive
example
format
!FL field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
IFLA.TMP (RMSIFL)
allocating space
IFLAl.TMP (RMSIFL)
allocating space
.IFLOA directive
example
format
IFLP.TMP (RMSIFL)
allocating space
.IFNACT directive
example
format
.IFNDF directive
example
format
.IFNINS directive
example
format
.IFNLOA directive
example
format
!FORM
.IFT directive
example
format
.IFTF directive
IHAR$S
• !IF directive

RMS-11 Macros 5-3 to 5-4
RMS-11 Macros 5-6
RMS-11 Macros 5-20
RMS-11 Macros 5-30
RMS-11 Macros 5-46
RMS-11 Macros 6-22
RMS-11 Macros 5-77
RMS-11 Macros 6-52
System Management 12-41
System Management 12-41
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
RMS-11 Macros 5-20
RMS-11 Macros 5-31
RMS-11 Macros 6-67
RMS-11 Macros 5-80
RMS-11 Macros 6-81
RMS-11 Utilities 3-11
RMS-11 Utilities 3-13
RMS-11 Utilities 3-12
RMS-11 Utilities 3-14
MCR Operations 4-41
MCR Operations 4-41
MCR Operations 4-41
RMS-11 Utilities 3-10
RMS-11 Utilities 3-13
MCR Operations 4-39
MCR Operations 4-39
MCR Operations 4-39
MCR Operations 4-39
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-40
MCR Operations 4-41
MCR Operations 4-41
MCR Operations 4-41
System Management 12-20 to 12-25
PDP-11 MACR0-11 6-53 to 6-55
MCR Operations 4-41
MCR Operations 4-41
MCR Operations 4-41
PDP-11 MACR0-11 6-53 to 6-54
Executive 5-53
PDP-11 MACR0-11 6-56
Index-133

MASTER INDEX
Illegal character
/IM switch
FLX utility
RMSCNV utility
VMR
Image
disk
memory
/IMAGE qualifier
BRU util tiy
Immediate address mode
Immediate conditional assembly
Immediate expression indicator
Implicit .WORD directive
Im pl ic it prompt
Implied TYPE (Null)
line editing
nokeypad editing
/IN switch
LBR utility
.INC directive
example
format
/INC keyword
INSTALL command
VMR
RUN command
/INC switch
OTL
INCLUDE command
.INCLUDE directive
Increasing FSR size
FORTRAN programs
MACR0-11 programs
INCREMENT statement
Incremental reorganization
Indefinite repeat block
Index
See also KEY block
alternate
bucket size calculation
level 0
SIDRs
area bucket size
See IBS field in KEY block
area number (higher levels}
See IAN field in KEY block
area number (lowest level}
See LAN field in KEY block
count
See NOK field in SUM block
data bucket size
See DBS field in KEY block
data bucket VBN
See DVB field in KEY block
depth
description, obtaining
See DISPLAY operation
level count
See LVL field in KEY block
levels
data
primary
bucket size calculation
level 0
reference number

PDP-11 MACR0-11 3-3
Utilities 4-5
RMS-11 Utilities 4-9
System Management 10-4, 10-41
Task Builder 2-8 to 2-9
Task Builder 2-8 to 2-9
Utilities 7-1 7
PDP-11 MACR0-11 5-6 to 5-7
PDP-11 MACR0-11 6-56
PDP-11 MACR0-11 3-2
PDP-11 MACR0-11 2-1, 2-4, 6-25
Introduction 1-6, 2-15, Gloss-16
to Gloss-17, Gloss-25
EDT Editor 7-12
EDT Editor 8-13
Utilities 10-19
MCR Operations 4-42
MCR Operations 4-42
MCR Operations 4-42
MCR Operations 3-95
System Management 10-22
MCR Operations 3-152
System Generation (llS) 2-8
EDT Editor 2-34, 7-10
PDP-11 MACR0-11 6-58
I/O Operations 2-41
I/O Operations 2-40
Error Logging 5-31
RMS-11 User's Guide 5-12
PDP-11 MACR0-11 7-3, 7-16 to 7-19
RMS-11 Introduction 3-7
RMS-11 User's Guide 6-19
RMS-11 User's Guide 5-5
RMS-11 User's Guide 5-5

RMS-11 User's Guide 5-5

RMS-11 User's Guide 5-4, 5-6
RMS-11 User's Guide 5-5
RMS-11 User•s Guide 6-16
RMS-11 User's Guide 5-5
Index-134

MASTER INDEX
Index
reference number (Cont.)
See REF field in KEY block
root
root bucket VBN
See RVB field in KEY block
Index address mode
Index bucket
Index def erred address mode
Index file
accessing
bit map
format
header
allocating
LBN
specifying
listing contents
VFY utility
mul tiheader
Index record
INDEX AREA
RMSDES utility
INDEX FILL
RMSDES utility
Indexed file organization
See also Index
See also FB$IDX code
access declarations
allocation
DEQ
initial, calculation
alternate keys
and remote access
areas
multi area files
single-area files
asynchronous operations
bucket fi 11 size
bucket format
bucket size
calculation, alternate
indexes
calculation, primary index
prologue
bucket splitting
changeable keys
compressing deleted records
CONNECT operation
contiguity
data 1 evel
data records
declaring with ORG$ macro
deferred write
DELETE operation
duplicate keys
depth
~--~--

u~;:;i.yn

allocation
areas
bucket size

RMS-ll User's Guide 5-5
PDP-11 MACR0-11 5-5
RMS-11 User's Guide 5-6
PDP-11 MACR0-11 5-6
I/O Operations 5-2, E-1
MCR Operations 3-125
I/O Operations E-2
I/0 Operations E-1
I/O Operations E-2
MCR Operations 3-80
MCR Operations 3-80
Utilities 9-6
MCR Operations 3-81
RMS-11 Introduction 3-7
RMS-11 User's Guide 5-2, 5-6
RMS-11 Utilities 2-41
RMS-11 Utilities 2-41
RMS-11 Introduction 3-6
RMS-11 User's Guide 1-5
RMS-11 User's Guide 7-1
RMS-11 User's Guide 6-22
RMS-11 User's Guide 6-26
RMS-11 User's Guide 6-22
RMS-11 Introduction 3-7
RMS-11 User's Guide 1-11
RMS-11 User's Guide B-3
RMS-11 User's Guide 5-2, 6-10
RMS-11 User's Guide 6-12
RMS-11 User's Guide 6-11
RMS-11 User's Guide 7-8
RMS-11 User's Guide 6-28
RMS-11 User's Guide 5-2
RMS-11 User's Guide 6-15
RMS-11 User's Guide 6-19
RMS-11 User's Guide 6-16
RMS-11 User's Guide 5-2
RMS-11 User's Guide 5-11
RMS-11 Introduction 3-10
RMS-11 User's Guide 5-10, 5-16,
6-7 I 6-9
RMS-11 User's Guide 7-2
RMS-11 User's Guide 6-13
RMS-11 User's Guide 5-5
RMS-11 Introduction 3-7
RMS-11 User's Guide 5-2
RMS-11 Macros 2-3
RMS-11 User's Guide 6-27, 7-8
RMS-11 User's Guide 5-15, 6-7,
7-3, 7-9
RMS-11 User's Guide 6-9
RMS-11 User's Guide 5-5
RMS-11 User:s Guide 5-i, 6-i
RMS-11 User's Guide 6-22
RMS-11 User's Guide 6-10
RMS-11 User's Guide 6-15
Index-135

MASTER INDEX
Indexed file organization
design (Cont.)
keys
placement control
populating files
record format
record size
directory operations
DISCONNECT operation
duplicate keys
file operations
FIND operation
random by key
sequential access
FLUSH operation
GET operation
random by key
sequential access
I/O techniques
incremental reo rg ani za ti on
index
index buckets
index levels
index records
keys
changeable
characteristics
data type
duplicates
null
number of
position
size
level 0
alternate indexes
primary indexes
locate mode
mass insertion
move mode
multiple access streams
multiple buffers
null keys
placement control
populating files
primary key order
random insertions
primary key
prologue
PUT operation
duplicate keys
mass insertion
random by key
random access
record operations
random access
sequential access
record transfer modes
locate mode
move mode
REWIND operation

root

RMS-11 User's Guide 6-2
RMS-11 User's Guide 6-13
RMS-11 User's Guide 6-26
RMS-11 User's Guide 6-1
RMS-11 User's Guide 6-1
RMS-11 User's Guide 7-10
RMS-11 User's Guide 7-3
RMS-11 Introduction 3-10
RMS-11 User's Guide 7-10
RMS-11 User's Guide 7-3, 7-9
RMS-11 User's Guide 5-13
RMS-11 User's Guide 5-17
RMS-11 User's Guide 7-5
RMS-11 User's Guide 7-5, 7-7 to
7-9
RMS-11 User's Guide 5-13
RMS-11 User's Guide 5-17
RMS-11 User's Guide 7-8
RMS-11 User's Guide 5-12
RMS-11 Introduction 3-7
RMS-11 User's Guide 5-6
RMS-11 User's Guide 5-4, 5-6
RMS-11 Introduction 3-7
RMS-11 User's Guide 5-2, 5-6
RMS-11 Introduction 3-6
RMS-11 User's Guide 1-5, 6-2
RMS-11 User's Guide 6-9
RMS-11 User's Guide 6-8
RMS-11 Introduction 3-7
RMS-11 User's Guide 6-3
RMS-11 User's Guide 6-8
RMS-11 User's Guide 6-10
RMS-11 User's Guide 6-2
RMS-11 User's Guide 6-7
RMS-11 User's Guide 6-6
RMS-11 User's Guide 5-5
RMS-11 User's Guide 5-5
RMS-11 User's Guide 7-7
RMS-11 User's Guide 6-28 to 6-29
RMS-11 User's Guide 7-7
RMS-11 User's Guide 7-10
RMS-11 User 1 s Guide 7-9
RMS-11 Introduction 3-10
RMS-11 User's Guide 6-13
RMS-11 User's Guide 6-26
RMS-11 User's Guide 6-27
RMS-11 User's Guide 6-28
RMS-11 Introduction 3-7
RMS-11 User's Guide 1-11
RMS-11 User's Guide 5-2
RMS-11 User's Guide 6-7, 7-5, 7-7,
7-9
RMS-11 User's Guide 6-9
RMS-11 User's Guide 7-9
RMS-11 User's Guide 5-10
RMS-11 User's Guide 5-7, 6-12
RMS-11 User's Guide 7-2
RMS-11 User's Guide 5-9
RMS-11 User's Guide 5-16
RMS-11 User's Guide 7-6
RMS-11 User's Guide 7-7
RMS-11 User~s Guide 7-7
RMS-11 User's Guide 7-6
RMS-11 User's Guide 1-7 I 5-5
Index-136

MASTER INDEX
Indexed file organization (Cont.)
search times
segmented keys
sequential reads
shared access
block access
record access
sharing declarations
stream operations
structure
conceptual
physical
tree structure
UPDATE operation
changeable keys
duplicate keys
INDEXF.SYS file
Indicator
See Register indicator
Indirect
command line
interpreting
command procedure library
command processor support for
V4. l

directive
parameter
changing
summary of
error message
error processing
example
exit status
function
invoking
interactively
example of
operating mode
disabling
enabling
initial setting
list
testing
special symbol
format
logical
numeric
string
type
switch
Indirect command file

acqu1r1ng information
BAD utility
block-structured
CLI
default file type for
initiating
nested
comment in
default name for
definition

RMS-11 User's Guide 5-8
RMS-11 Introduction 3-10
RMS-11 User's Guide 7-10
RMS-11 User's Guide 7-1
RMS-11 User's Guide 7-1
RMS-11 User's Guide 7-1
RMS-11 User's Guide 7-1
RMS-11 User's Guide 7-2
RMS-11 User's Guide 5-4
RMS-11 User's Guide 5-2
RMS-11 Introduction 3-7
RMS-11 User's Guide 5-14, 7-6 to
7-9
RMS-11 User's Guide 6-10
RMS-11 User's Guide 6-9
Command Language 5-11, 5-65 to
5-66

MCR Operations 4-2
Release Notes 1-28
Release Notes 1-28
MCR Operations 4-1
MCR Operations 4-4
MCR Operations 4-57
MCR Operations 4-10, 4-43
MCR Operations 4-56
MCR Operations 4-51
MCR Operations 4-2
MCR Operations 4-56
MCR Operations 4-31
MCR Operations 4-32
MCR Operations 4-32
MCR Operations 4-32
MCR Operations 4-40
MCR Operations 4-8
MCR Operations 4-8
MCR Operations 4-8
MCR Operations 4-10
MCR Ope·rations 4-12
MCR Operations 4-8
MCR Operations 4-19
I/O Operations 6-3
I/O Operations 6-11 to 6-12
Introduction 6-3
Task Builder 1-5, 3-29
Utilities 1-9
MCR Operations 4-52, 4-54
Utilities 6-2
MCR Operations 4-3
MCR Operations 4-2
MCR Operations 4-2
MCR Operations 4-2
MCR Operations 4-2
MCR Operations 4-3
MCR Operations 4-4
Batch and Queue Gloss-5

Index-137

MASTER INDEX
Indirect command file (Cont.)
deleting
displaying trace of
exiting from
FMT utility
independent
BLDLAINIT.CMD
SGNBLDDRV.CMD
SGNKLAB.CMD
invoking

MCR Operations 4-19
MCR Operations 4-19
MCR Operations 4-51
Utilities 5-9
System Generation (llM) 3-5
System Generation (llM) 3-5
System Generation (llM) 3-5
System Generation (llM) 3-5
System Generation (llM) 3-5
System Management 4-6
System Generation (llM) 3-5
I/O Operations 6-3 to 6-4
System Generation (llM) 3-5

!OX

major
maximum nesting depth
overview
parameter
processing
passing commands in
to CLI
processing
interrupting
suspending
terminating
RMSBCK utility
RMSCNV utility
RMS DEF utility

MCR Operations 4-17
MCR Operations 4-19
MCR Operations 4-46
MCR Operations 4-55
MCR Operations 4-36, 4-51
RMS-11 Utilities 6-2
RMS-11 Utilities 4-4
RMS-11 Utilities A-1 to A-2, A-5
to A-6, A-19
RMS-11 Utilities 2-3
RMS-11 Utilities 2-4
RMS-11 Utilities 5-2
RMS-11 Utilities 3-2
RMS-11 Utilities 7-2
MCR Operations 4-4
Utilities 13-8
MCR Operations 4-1
MCR Operations 4-1
MCR Operations 4-1
MCR Operations 4-2
MCR Operations 4-4

RMS DES utility
comments
RMSDSP utility
RMSIFL utility
RMSRST utility
searching UIC for
SLP utility
task
default file type for
initiating
nested
task name in
using
example of
VMR
with ODL
ZAP utility
Indirect command file operator

MCR Operations 4-56
System Management 10-3
Task Builder 3-29
Utilities 15-6

( @)

Indirect command file processor
Indirect Command Processor
See also Indirect
Industrial control subsystem
/INDX keyword
INI command
/INF keyword
INI command
Inf ile
RMSBCK utility
RMSCNV utility
RMSDSP utility
RMSIFL utility
RMSRST utility
Information record
text
Inhibit AST Recognition
Inhibit MCR
See MCR
INI command
$INIDM (Initialize memory)

Command Language 3-16
Command Language 1-17
Introduction 6-2 to 6-3, Gloss-17
I/O Drivers 18-1
MCR Operations 3-80
MCR Operations 3-80
RMS-11 Utilities 6-3
RMS-11 Utilities 4-5
RMS-11 Utilities 5-3
RMS-11 Utilities 3-3
RMS-11 Utilities 7-3
Task Builder A-11
Executive 5-53
MCR Operations 3-76
System Library 7-2

Index-138

MASTER INDEX
/!NIT keyword
CLI command
Initial allocation
indexed files
relative files
sequential files
Initial argument indicator
Initial expression indicator
Initial register indicator
Initialization
field
INITIALIZE command
/INITIALIZE qualifier
BRU utility
INITIALIZE/PRINTER command
DCL
INITIALIZE/PROCESSOR command
DCL
/FORMS qualifier
INITIALIZE/QUEUE command
DCL
INITIALIZE/UPDATE command
INITMl
INITVOLUME command
command line format
error message
example
keyword
/ACCESS
/BAD
/DENS
displaying
/EXT
/FPRO
/INDX
/INF
/LRU
/MXF
/OWNER
/PRO
/UIC
/VI
/WIN

$INIVM (Initialize virtual
memory)
Input
data format
Task Builder
mul t i-1 ine
to the Task Builder
solicited
terminating
unsolicited
processing
parallel
Input file
Input file switch
RMSBCK utility
RMS !FL utility
RMSRST utility
Input/output
See I/O
Input/output device
See Device

MCR Operations 3-36
RMS-11 user's Guide 6-22
RMS-11 User's Guide 4-3
RMS-11 User's Guide 3-4
PDP-11 MACR0-11 3-2
PDP-11 MACR0-11 3-2
PDP-11 MACR0-11 3-2
RMS-11 Macros 2-9
Introduction 5-12
Command Language 5-4, 5-10, 5-12,
5-47 to 5-56, 9-18
Utilities 7-17
System Management 7-6
Command Language 9-19
System Management 7-14 to 7-19
System Management 7-17
Command Language 9-20
System Management 7-4, 7-11, 7-13
Command Language 5-11, 5-57 to
5-59, 9-20
Error Logging 4-7
MCR Operations 3-76
MCR Operations 3-76
MCR Operations 3-85
MCR Operations 3-85
MCR Operations 3-77
MCR Operations 3-77
MCR Operations 3-79
MCR Operations 3-84
MCR Operations 3-79
MCR Operations 3-80
MCR Operations 3-80
MCR Operations 3-80
MCR Operations 3-82
MCR Operations 3-82
MCR Operations 3-83
MCR Operations 3-84
MCR Operations 3-84
MCR Operations 3-84
MCR Operations 3-84
System Library 8-5
Task Builder A-1
Task Builder 1-3
MCR Operations 2-14
MCR Operations 2-15
MCR Operations 2-14
MCR Operations 3-197
Introduction 4-5, Gloss-17
RMS-11 Utilities 6-8
RMS-11 Utilities 3-7
RMS-11 Utilities 7-8

Index-139

MASTER INDEX
INS command
INSERT command
EDI editor
EDI editor
EDT
Insert Directory Entry
INSERT END command
Inserting
characters in a line
code in the source file
lines in a file
modules in a library
text
INSERT command
INSERT END command
keypad editing
line editing
no keypad editing
INSTALL command

command line format
error message
example
keyword
/CKP
/CL!
/INC
/!OP

/PAR
/PMD
/PR!
/SLV
/TASK
VMR
command line format
example
keyword
/CKP
/CL!

/FIX
/INC
/!OP

/PAR
/PMD
/PR!
/SLV
/TASK
/UIC
Installation
computer
DCL

flying
RPT
task
Installed task
removing
Installing
DCL
Instruction set
commercial
floating-po int
PDP-11
Instruction space
command

MCR Operations 3-93
EDT Editor 2-21, 2-26, 2-33, 7-11
Program Development 2-18, 7-7
Utilities 2-15
Introduction 2-4, 2-9
I/O Operations 4-15
EDT Editor 2-27, 2-31
Program Development 2-17
Program Development 2-18
Program Development 2-9, 2-18
Program Development 6-9 to 6-10
EDT Editor 2-26, 2-33, 7-11
EDT Editor 2-31
EDT Editor 2-8, 5-2, 5-10
EDT Editor 2-26, 7-11
EDT Editor 2-40, 8-12
Introduction 4-10
Command Language 7-1, 7-4 to 7-8,
7-12 to 7-15, 7-26 to 7-34,
7-60, 9-20, 9-37
MCR Operations 3-93
MCR Operations 3-93
MCR Operations 3-98
MCR Operations 3-98
MCR Operations 3-94
MCR Operations 3-95
MCR Operations 3-95
MCR Operations 3-95
MCR Operations 3-95
MCR Operations 3-96
MCR Operations 3-96
MCR Operations 3-96
MCR Operations 3-97
System Management 10-20
System Management 10-20
System Management 10-26
System Management 10-21
System Management 10-22
System Management 10-22
System Management 10-22
System Management 10-22
System Management 10-22
System Management 10-23
System Management 10-23
System Management 10-24
System Management 10-25
System Management 10-25
Introduction 1-2, Gloss-18
Introduction 5-3
System Management 12-1
System Management 12-3
Error Logging 3-1
Introduction 4-9 to 4-10
Command Language 7-57 to 7-58
Executive 1-12
System Management 12-3
PDP-11 MACR0-11 C-3 to C-4
PDP-11 MACR0-11 C-4 to C-5
PDP-11 MACR0-11 C-1 to C-2
ODT 3-2, 7-2
Index-140

MASTER INDEX
Instruction space
command (Cont.)
access
enable
Integer
repeat function
used with GOLD function
Integer key
See also XB$IN2 mask in DTP field
See also XB$IN4 mask in DTP field
2-byte signed
4-byte signed
Integer routine
divide ($DIV)
multiply ($MUL)
Inter-task communication
Interactive mode

EDT Editor 5-7
EDT Editor 5-7

RMS-11 User's Guide 6-4
RMS-11 User's Guide 6-4
System Library 3-2
System Library 3-1
Executive 4-1
System Management 4-18
Introduction 1-1, 5-3, Gloss-18

!OX

Interactive system
Interactive terminal
definition
Interactive utility
RMSDEF utility
RMSDES utility
Interface
terminal
INTERLEAVE command

Batch and Queue Gloss-5
RMS-11 Utilities A-1
RMS-11 Utilities 2-1
I/O Drivers 3-2
System Management 4-40

!OX

Intermediate form
DCL
!FORM
Intermodule variable
block number
cylinder error
device function
drive serial number
drive type
error type
group error
head error
MAS SB US
Non-MASSBUS
physical unit number
sector error
Intermodule variable declaration
Internal displaced relocation
Internal file identifier
See !FI field in FAB
Internal register
Internal stream identifier
See IS! field in RAB
Internal symbol
directory record
name entry
Interpreter
BASIC-11
Interpreting crash dumps
interrupt save
mapping information
stack depth
Kernel stack
SST
$STKDP
Interrupt
definition

ODT 2-9
ODT 1-3

Error Logging 4-29
Error Logging 4-29
Error Logging 4-29
Error Logging 4-29
Error Logging 4-29
Error Logging 4-29
Error Logging 4-29 to 4-30
Error Logging 4-29
Error Logging 4-29
Error Logging 4-33
Error Logging 4-33
Error Logging 4-29
Error Logging 4-29
Error Logging 4-14
Task Builder A-15
ODT 5-2

Task Builder A-24
Task Builder A-5
Command Language 6-2, 6-11 to
6-13
Crash Dump Analyzer 4-2
Crash Dump Analyzer 4-1
Crash Dump Analyzer 4-1
Crash Dump Analyzer 4-2
Crash Dump Analyzer 4-2
Crash Dump Analyzer 4-2
System Generation

Index-141

{UM)

1-4

MASTER INDEX
Interrupt Control Block
See ICB
Interrupt entry point
address
Interrupt level
Interrupt processing
fork level
priority 7
priority of interrupting source
Interrupt Service Routine
See ISR
Interrupt timeouts
error logging
Interrupt Transfer Block
Intersystem file transfer
RMSCNV utility
RMSRST utility
/FR switch
version number conversion
Interval report
IOX
INTSV
$INTSV routine
calling with INTSV$ macro
processing at priority of
interrupting source
INTSV$ macro
description
format
$INTXT routine
Invoking
ODT
RMSBCK utility
RMSCNV utility
RMSDEF utility
RMSDES utility
RMSDSP utility
RMSIFL utility
RMSRST utility
/INVOLUME qualifier
BRU utility
$IOALT routine
$$IOB1
reserved PSECT name

Writing I/O Driver 3-5
Executive 5-18
Writing 1/0 Driver 2-9, 2-15
Writing I/O Driver 2-14
Writing 1/0 Driver 2-14

Error Logging 1-6
Executive 5-18
RMS-11 Utilities 1-2, 6-1
RMS-11 Utilities 4-1
RMS-11 Utilities 7-1, 7-10
RMS-11 Utilities 7-7
RMS-11 Utilities 7-5
System Management 4-20
Crash Dump Analyzer 4-2
Writing 1/0 Driver 2-12, 5-15
Writing I/O Driver 4-35
Writing I/O Driver 2-15
Writing 1/0 Driver 4-35
Writing I/O Driver 4-35
Writing 1/0 Driver 5-16
ODT 1-4, 5-1
RMS-11 Utilities 6-2
RMS-11 Utilities 4-3
RMS-11 Utilities A-5
RMS-11 Utilities 2-2
RMS-11 Utilities 5-2
RMS-11 Utilities 3-2
RMS-11 Utilities 7-2
Utilities 7-17
Writing I/O Driver 2-13, 5-17
Task Builder E-3

$$IOB2

reserved PSECT name
$!ODON routine
$IOFIN routine
use of
by ACP
/IOP keyword
INSTALL command
VMR

RUN command
IOSTAT

Task Builder E-3
Writing I/O Driver 2-13, 5-17
Writing I/O Driver 5-18
Writing 1/0 Driver D-7
MCR Operations 3-95
System Management 10-22
MCR Operations 3-153
I/O Operations 2-44

!OX

command
ABORT
BADBLOCKS
BUFFERSIZE
categories
COMPAREDATA YES/NO
CONFIGURE
CONTROL C YES/NO
CTRL/C -

DENSITY
description

System Management 4-23
System Management 4-24
System Management 4-26
System Management 4-3
System Management 4-27
System Management 4-28
System Management 4-31
System Management 4-30
System Management 4-32
System Management 4-22
Index-142

MASTER INDEX
IOX

command (Cont.)
de sc r i pt ions
DESELECT
ERRORLIMIT
EXECUTE
EXIT
files
FILESll
HELP
in interactive mode
INTERLEAVE
LOG FILE
mode
parameter
by device type
with FILES 11
with SELECT
with VERIFY
parameter list
for Files-11
for NFS volumes
PARAMETERLIST
PATTERN
PRINTSUMMARY
PROCEED
RANDOM
RANGE
RECORDS
REPORTERRORS YES/NO
RESTART
RETRIES
RUNTIME
SELECT
SPY
START
summary with HELP
SUMMARYTIME
syntax
TEMPORARYFILE
VERIFY
VOLUMECHECK
WAIT
WRITECHECK
considerations for
controlling with CTRL/C
data
compare error report
pattern checking
transfer size of
DECtape exercising
defaults
changing during task build
device
exercising steps
status display
testing
time of
disk exercising
error message
execution mode
entering
exercise parameters
list of general
exiting from
file-structured exercising
increment

System Management 4-22
System Management 4-34
System Management 4-35
System Management 4-36
System Management 4-37
System Management 4-6
System Management 4-38
System Management 4-39
System Management 4-19
System Management 4-40
System Management 4-41
System Management 4-18
System Management 4-9
System Management 4-8
System Management 4-8
System Management 4-9
System Management 4-8
System Management 4-8
System Management 4-42
System Management 4-46
System Management 4-47
System Management 4-48
System Management 4-49
System Management 4-50
System Management 4-51
System Management 4-52
System Management 4-53
System Management 4-54
System Management 4-55
System Management 4-56
System Management 4-58
System Management 4-59
System Management 4-39
System Management 4-60
System Management 4-22
System Management 4-61
System Management 4-62
System Management 4-63
System Management 4-64
System Management 4-65
System Management 4-1
System Management 4-30
System Management 4-21
System Management 4-27
System Management 4-26
System Management 4-3
System Management 4-22
System Management 4-2
System Management 4-58
System Management 4-55
System Management 4-2
System Management 4-66
System Management 4-18
System Management 4-18
System Management 4-8
System Management 4-37
System Management 4-3
System Management 4-5
Index-143

MASTER INDEX
!OX (Cont.)
indirect command files
installation
on RSX-llM
on RSX-llM-PLUS
interleaving with Executive
interval report output
frequency
invoking
on RSX-llM
on RSX-llM-PLUS
when installed
when not installed
with an increment
without an increment
nonfile-structured exercising
output type
activity report
interval report
summary report
parameter
command exercising magtape
default overriding with
FILESll
default overriding with
SELECT
default shown with
PARAMETER LIST
device-dependent exercise
exercising Files-11 volumes
exercising NFS volume
list of general exercise
parameter command
category
pattern
altering test
displaying test
restarting
RSX-llM
running from
running steps
selecting
devices
Files~ll

vol Uiiie

NFS volume
NFS volume with VERIFY
starting
tape exercising
task termination
task-build file
location of
termination
using PROCEED
test configuration
adding units
displaying
setting up
testing
removing devices from
wait-for-event flag
write-check
/IP switch
!RAB pool
.IRP directive
.IRPC directive
ISA
FORTRAN routines

System Management 4-6
System Management 4-4
System Management 4-4
System Management 4-64
System Management 4-60
System Management 4-5
System Management 4-5
System Management 4-5
System Management 4-5
System Management 4-5
System Management 4-5
System Management 4-3
System Management 4-19
System Management 4-20
System Management 4-20
System Management 4-11
System Management 4-38
System Management 4-56
System Management 4-42
System Management 4-8
System Management 4-9
System Management 4-14
System Management 4-8
System Management 4-3
System Management 4-46
System Management 4-46
System Management 4-53
System Management 4-36
System Management 4-2
System Management 4-7
System Management 4-7
System Management 4-7, 4-62
System Management 4-7
System Management 4-59
System Management 4-2
System Management 4-18
System Management 4-22
System Management 4-37
System Management 4-48
System Management 4-28
System Management 4-6
System Management 4-7
System Management 4-6
System Management 4-34
System Management 4-64
System Management 4-65
Task Builder 10-22
RMS-11 Macros 2-5
PDP-11 MACR0-11 7-17
PDP-11 MACR0-11 7-18
System Generation (llM) 4-56

Index-144

MASTER INDEX
ISA (Cont.)
industrial/laboratory libraries
IS I fie 1d in RAB
CONNECT operation
DELETE operation
DISCONNECT operation
FIND operation
FLUSH operation
FREE operation
GET operation
NXTVOL operation
offset
PUT operation
READ operation
REWIND operation
SPACE operation
summary
TRUNCATE operation
UPDATE operation
WAIT operation
WRITE operation
ISR
IS TAT$
ITBDF$
Item terminator

System Generation (llM) 4-56
RMS-11 Macros 4-2
RMS-11 Macros 5-7
RMS-11 Macros 5-25
RMS-11 Macros 5-27
RMS-11 Macros 5-49, 5-51, 5-54
RMS-11 Macros 5-56
RMS-11 Macros 5-58
RMS-11 Macros 5-60, 5-63, 5-67
RMS-11 Macros 5-70
RMS-11 Macros 6-115
RMS-11 Macros 5-91, 5-95
RMS-11 Macros 5-98, 5-100
RMS-11 Macros 5-114
RMS-11 Macros 5-120
RMS-11 Macros 6-121
RMS-11 Macros 5-122
RMS-11 Macros 5-124
RMS-11 Macros 5-126
RMS-11 Macros 5-127, 5-129
Executive 5-18
I/O Operations 7-2, 7-7
Crash Dump Analyzer B-25
PDP-11 MACR0-11 3-2

J
/JO switch
PRI command
Job
deleting
holding
modifying
releasing
/JOB PAGE qualifier
PRINT command
/JOBCOUNT job qualifier
SET QUEUE command
/JOBCOUNT qualifier
PRINT command
Jobname parameter
DELETE command
Jobname switch
QUE /LI command
Jobname= switch
PRI command
Journal file
definition
editing
protecting edits with
saving
successive recovery
JOURNAL qualifier
DCL
MCR
Journaling
EDT
$JSR
predefined syntax element in
MML

Batch and Queue 2-6
Batch and Queue 2-10
Batch and Queue 2-1
Batch and Queue 2-1
Batch and Queue 2-1
Batch and Queue 2-6
Batch and Queue 2-20
Batch and Queue 2-3
Batch and Queue 2-10
Batch and Queue 2-16
Batch and Queue 2-4
EDT Editor 1-4
EDT Editor 3-4
EDT Editor 3-1
EDT Editor 3-5, 7-8
EDT Editor 3-4
EDT Editor 4-4
EDT Editor 4-6
EDT Editor 1-4
Introduction 2-17, Gloss-18
System Management 12-45

K
K command
ZAP utility
k symbol

ODT 2-9, 7-1
Utilities 15-16
ODT 2-1, 2-3
Index-145

MASTER INDEX
K-series
buffer management
device support
FORTRAN interface
I/O status block
MACR0-11 interface
routine
generating
K-SERIES lab support routine
generating
KBF field in RAB
FIND operation
GET operation
offset
PUT operation
summary
/KDS
Kernel
Kernel data space dump
Kernel data space switch
Kernel instruction space dump
Kernel instruction space switch
Kernel Mapping Register switch
Kernel stack dump
Key
ALT MODE
alternate

I/O Drivers 22-1
I/O Drivers 22-32
Systea Generation (llM) 4-12
I/O Drivers 22-7 to 22-30
I/O Drivers 22-32
I/O Drivers 22-31
I/O Drivers 22-4 to 22-5
System Generation (llS) 4-9
RMS-11 Macros 4-5
RMS-11 Macros 5-52
RMS-11 Macros 5-63
RMS-11 Macros 6-115
RMS-11 Macros 5-96
RMS-11 Macros 6-122
Crash Dump Analyzer 2-2
Introduction 5-4, Gloss-18
Crash Dump Analyzer 3-54
Crash Dump Analyzer 2-4
Crash Dump Analyzer 3-54
Crash Dump Analyzer 2-4
Crash Dump Analyzer 2-8
Crash Dump Analyzer 3-1, 3-5
RMS-11 Introduction 3-6
RMS-11 User's Guide 1-5, 1-19,
6-2
Command Language 3-12
RMS-11 Introduction 3-7
RMS-11 User's Guide 1-7, 1-11
Command Language 3-13

BACK SPACE
buffer address
See KBF field in RAB
buffer size
See KSZ field in RAB
CAPS LOCK
Command Language 3-14
changeable
RMS-11 Introduction 3-10
See also XB$CHG mask in FLG field
characteristics
RMS-11 User's Guide 6-8
See also FLG field in KEY block
changeable
RMS-11 User's Guide 6-9
duplicates
RMS-11 User's Guide 6-8
null
RMS-11 User's Guide 6-10
Command Language 3-14
COPY
CTRL
Command Language 3-18
cur so r-contro 1
Command Language 3-17
data type
RMS-11 Introduction 3-7
RMS-11 User's Guide 6-3
See also DTP field in KEY block
2-byte signed integer
RMS-11 User's Guide 6-4
4-byte signed integer
RMS-11 User's Guide 6-4
2-byte unsigned binary
RMS-11 User's Guide 6-5
4-byte unsigned binary
RMS-11 User's Guide 6-5
packed decimal
RMS-11 User's Guide 6-6
string
RMS-11 User's Guide 6-3
DELETE
Command Language 3-13
duplicate
RMS-11 Introduction 3-10
See also XB$DUP mask in FLG field
ENTER
Command Language 3-12, 3-17
ESC
Command Language 3-12
ESCAPE
Command Language 3-12
I/O Drivers 3-22
Command Language 3-13
LINE FEED
match criterion
RMS-11 Introduction 3-12
See also RB$KGE mask in ROP field
See also RB$KGT mask in ROP field
name
Index-146

MASTER INDEX
Key
name ( Co n t • )
See KNM field in KEY block
f"'"'"'"'"""'A T """'"'n"""'"" ':!_1 JI
NO SCROLL
null
RMS-11 Introduction 3-10
See also NUL field in KEY block
number of
RMS-11 User's Guide 6-2
position
RMS-11 User's Guide 6-7
primary
RMS-11 Introduction 3-7
RMS-11 user's Guide 1-7, 1-11
reference
See KRF field in RAB
REPEAT
Command Language 3-14
RETURN
Command Language 3-2, 3-12, 3-17,
3-22
I/O Drivers 3-22
RMSDES utility
numbering
RMS-11 Utilities 2-8, 2-28, 2-38
rubout
I/O Drivers 3-22, 3-24
SCROLL
Command Language 3-14
segment
RMS-11 Introduction 3-10
RMS-11 User's Guide 6-7
segment count
See NSG field in KEY block
segment, position
See POS field in KEY block
segment, size
See SIZ field in KEY block
SEL
Command Language 3-12
SHIFT
Command Language 3-14
size
RMS-11 User's Guide 6-6
See also TKS field in KEY block
special
I/O Drivers 2-29
special character
MCR Operations 2-14
TAB
Command Language 3-22
XAB
See KEY block
KEY block
RMS-11 Introduction 4-8
chaining to FAB
RMS-11 Macros 2-12 to 2-13
declaring
RMS-11 Macros 2-8
in i ti a l i z i ng
RMS-11 Macros 2-9
summary
RMS-11 Macros 6-67
Key buff er pool
RMS-11 Macros 2-6
Key information
RMSDSP utility
displaying
RMS-11 Utilities 5-4
Key name
RMSCNV utility
RMS-11 Utilities 4-10
Key of reference
RMSCNV utility
RMS-11 Utilities 4-10, 4-16
RMSIFL utility
RMS-11 Utilities 3-8 to 3-9
Key record access
RMS-11 Introduction 3-12
See also RB$KEY code in RAC ' field
to indexed files
RMS-11 User's Guide 5-7' 5-9
to relative files
RMS-11 User's Guide 4-1
to sequential files
RMS-11 User's Guide 3-2
Keyboard
terminal
Command Language 3-1, 3-11
Keypad
terminal
Command Language 3-1, 3-17
Keypad editing
advantage
EDT Editor 2-4
changing case in
EDT Editor 5-48
command
EDT Editor 1-9
deleting text in
EDT Editor 5-25
description
EDT Editor 1-7
description of keypad diagram
EDT Editor 5-6
"""'VUU.UW.ii.~

Index-147

~Wii":J

WU.":j V

..J

..;.. -Z

MASTER INDEX
Keypad editing (Cont.)
ending a session
entering text in
essential function
how to use
reinserting text in
setting direction of cursor
movement
starting
Keypad editor
See Editor, K52 and
Editor, KED
Keypad function
ADVANCE
alternate
APPEND
BACK SPACE
BACKUP
BOTTOM
CHAR
CHNGCASE
COMMAND
control key
CTRL/A
CTRL/C
CTRL/D
CTRL/E
CTRL/K
CTRL/T
CTRL/U
CTRL/W
CTRL/Z
CUT
DEL C
DEL EOL
DEL L
DEL W
DELETE
DOWN
ENTER
EOL
EXIT
FILL
FIND
FNDNXT
GOLD
GOLD integer
HELP
how to use
LEFT
LINE
LINE FEED
OPEN LINE
PAGE
PASTE
QUIT
redefining key
REPLACE
RESET
RIGHT
SECTION
SELECT
setting tab
SPEC INS
standard
SUBS
TOP

EDT Editor 2-19, 5-9
EDT Editor 5-10
EDT Editor 5-7
EDT Editor 2-4, 5-2
EDT Editor 5-25
EDT Editor 5-15
EDT Editor 2-5, 5-1

EDT Editor 5-3 to 5-4
EDT Editor 5-15
EDT Editor 2-8, 5-5
EDT Editor 5-38
EDT Editor 5-19
EDT Editor 5-15
EDT Editor 5-21
EDT Editor 5-16
EDT Editor 2-18 to 2-19, 5-48
EDT Editor 5-9, 5-47
EDT Editor 5-53
EDT Editor 5-53
EDT Editor 5-54
EDT Editor 5-53
EDT Editor 5-53
EDT Editor 5-54
EDT Editor 5-53
EDT Editor 5-30, 5-48
EDT Editor 5-8
EDT Editor 5-8
EDT Editor 5-33
EDT Editor 5-26
EDT Editor 5-30
EDT Editor 5-32
EDT Editor 5-28
EDT Editor 5-25
EDT Editor 5-13
EDT Editor 5-46, 5-48
EDT Editor 5-18
EDT Editor 5-9
EDT Editor 5-49, 5-52
EDT Editor 5-21
EDT Editor 5-23
EDT Editor 5-5
EDT Editor 5-7
EDT Editor 5-7
EDT Editor 2-5
EDT Editor 5-14
EDT Editor 5-18
EDT Editor 5-28
EDT Editor 5-11
EDT Editor 5-20
EDT Editor 5-33, 5-36
EDT Editor 5-9
EDT Editor 10-1
EDT Editor 5-40
EDT Editor 5-8, 5-34
EDT Editor 5-14
EDT Editor 5-20
EDT Editor 5-33
EDT Editor 5-53
EDT Editor 5-48
EDT Editor 2-8, 5-5
EDT Editor 5-44
EDT Editor 5-21
Index-148

MASTER INDEX
Keypad function {Cont.)
UND C
UND L
UND W

UP
VTlOO
VT52
WORD
Keypad key
function
redefining functions of
VTlOO
VT52
Keypad number
Keyword

abbreviation
recognition
VMR

Keyword table
KILL command
EDI editor
/KIS

/KMR
/KN switch
RMSCNV utility
/KN L keyword
OPEN command
KNM field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
/KR switch
RMSCNV utility
RMSIFL utility
KRF field in RAB
CONNECT operation
FIND operation
GET operation
offset
REWIND operation
summary
KSR-33
KSR-35
KSZ field in RAB
FIND operation
GET operation
offset
PUT operation
summary
KWll-K
KWll-P
as system clock
KWll-Y Watchdog timer
KWVll-A

EDT Editor 5-27
EDT Editor 5-32
-~~--l:.O~
EDT t;Q.l.
5-29
EDT Editor 5-13
EDT Editor 2-6, 5-4
EDT Editor 2-7, 5-3
EDT Editor 5-17
EDT Edi tor 5-1
EDT Editor 10-1
EDT Editor 2-6, 5-4
EDT Edi tor 2-7, 5-3
EDT Editor 10-3
MCR Operations 1-4
I/O Operations 7-12
I/O Operations 7-9
System Management 10-4
I/O Operations 7-2
Utilities 2-34
Crash Dump Analyzer 2-2
Crash Dump Analyzer 2-6
RMS-11 Utilities 4-10, 4-16
MCR Operations 3-137
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros
Macros
Macros
Macros
Macros

5-18
5-30
6-68
5-74
6-82

RMS-11 Utilities 4-10, 4-16
RMS-11 Utilities 3-8 to 3-9
RMS-11 Macros 4-5
RMS-11 Macros 5-7
RMS-11 Macros 5-51
RMS-11 Macros 5-63
RMS-11 Macros 6-115
RMS-11 Macros 5-114
RMS-11 Macros 6-123
I/O Drivers 2-3, 3-2
I/O Drivers 2-3, 3-2
RMS-11 Macros 4-5 to 4-6
RMS-11 Macros 5-52
RMS-11 Macros 5-63
RMS-11 Macros 6-115
RMS-11 Macros 5-96
RMS-11 Macros 6-124
I/O Drivers 22-3
System Generation (llM) 4-14
System Generation (llM) 4-15
I/O Drivers 22-3

L
L command
L error
summary
L register
LAlOO
LA12
LA120
LA180

ODT 2-9, 6-4
PDP-11 MACR0-11 2-1
PDP-11 MACR0-11 D-4
ODT 2-6, 5-3
I/O Drivers 2-3
I/O Drivers 2-3
I/O Drivers 2-4, 3-3
I/O Drivers 10-2
Index-149

MASTER INDEX
I/O Drivers 2-4, 3-3
I/O Drivers 2-4, 3-2
I/O Drivers 3-29
I/O Drivers 2-4
Introduction 1-2
Command Language 3-1, 3-14
I/O Drivers 2-4, 3-2
I/O Drivers 2-4
I/O Drivers 2-4A
Introduction 4-4, Gloss-18
RMS-11 Introduction 2-5
PDP-11 MACR0-11 2-1 to 2-3
MCR Operations 4-22
MCR Operations 4-28
MCR Operations 4-37
MCR Operations 4-22
MCR Operations 4-22
MCR Operations 4-22
PDP-11 MACR0-11 2-3
PDP-11 MACR0-11 2-3
PDP-11 MACR0-11 3-1
Command Language 5-28

LA180S
LA30
LA30-P
LA34
LA36
LA38
LASO
Label
field
Indirect
Begin-End block with
branching to
defining
direct access
maximum number of
legal character in
multiple definition
terminator
volume
Fi les-11
specifying
overriding
Label block
group
/LABEL keyword
MOUNT command
Labeled magtape volume

MCR Operations 3-73, 3-77
MCR Operations 3-73, 3-122
Task Builder 2-8
Task Builder B-1
MCR Operations 3-121
Command Language 5-4, 5-35 to
5-36

Laboratory peripheral
K-series support routine
Laboratory Peripheral Accelerator
See LPAll-K
Laboratory peripheral system
clock rate
device-specific QIO
FORTRAN interface
subroutine summary
synchronous subroutine
sampling rate
standard QIO
status return
LAN field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
Language
assembly
See also MACR0-11
high-level
overlay program in
source
support
Laser printer
LNOl
LAST
range specification
Layered product
installing

I/O Drivers 22-1
I/O Drivers 16-1
I/O Drivers 16-33 to 16-34
I/O Drivers 16-3 to 16-9
I/O Drivers 16-9
I/O Drivers 16-11 to 16-28
I/O Drivers 16-10
I/O Drivers 16-33 to 16-34
I/O Drivers 16-2
I/0 Drivers 16-29 to 16-33
RMS-11 Macros 5-19
RMS-11 Macros 5-31
RMS-11 Macros 6-67
RMS-11 Macros 5-80
RMS-11 Macros 6-83
Program Development 1-4 to 1-5
Introduction 3-12, 4-12 to 4-13,
Gloss-16
Task Builder 3-39
Introduction 4-4, Gloss-30
Command Language 6-2
Command Language 6-2
I/O Drivers 10-2
EDT Editor 6-8
System Generation (llM) 6-12,
6-19

Index-150

MASTER INDEX
Task Builder 10-23 to 10-24
Utilities 11-6
MCR Operations 4-19

/LB switch
DMP utility
Indirect
LB:
pseudo device
LBLDF$ macro
LBN

Command Language 5-6
Task Builder B-1
RMS-11 Introduction 2-4
RMS-11 User's Guide 8-11

See also Placement control
index file
specifying
LBR

MCR Operations 3-80
Command Language 6-39 to 6-61
Program Development 1-9

See also LIBRARY command
adding a module to a library
/COMPRESS
/CR
/CREATE

Program Development 6=9 ....... 6-10
Program Development 6-10
Program Development 6-2, 6-5
Program Development 6-1, 6-4 to
6-5
Program Development 1-9
Program Development 6-11 to 6-12
Program Development 6-11
Program Development 6-10
Program Development 6-9
\..V

efficiency
/FU
/FULL
/IN
/INSERT
LBR command
MCR
/LE
LIBRARY command
DCL
/LIST
listing information
/MACRO
macro library
module name requirement
/NAMES
/OBJECT

Program Development 1-9, 6-2
Program Development 6-11 to 6-12

object module library
.OLB file type
/REPLACE
replacing a module in a library
/RP
/-SP
LBR command
MCR
See also LBR
LBR command 1 ine
device-level module
DEVSMl
DSP2Ml
LBR utility
combining library function
command line
default
error message
library file
creating
deleting
format
inserting module
listing
replacing module
spooling
restriction
switch
universal library file
inserting module

Program Development 1-9, 6-1
Program Development 6-9, 6-11
Program Development 6-11 to 6-12
Program Development 6-1 to 6-2
Program Development 6-1 to 6-3
Error Logging 4-17
Program Development 6-11
Program Development 6-2, 6-4 to
6-5
Program Development 6-4 to 6-6
Program Development 6-4
Program Development 6-9 to 6-10
Program Development 6-10 to 6-11
Program Development 6-10 to 6-11
Program Development 6-11
Program Development 1-9, 6-2
Error Logging 4-37
Error Logging 4-36
Error Logging 4-36
Utilities 10-32
Utilities 10-8
Utilities 10-8
Utilities 10-33
Utilities 10-12
Utilities 10-13
Utilities 10-2
Utilities 10-20
Utilities 10-21
Utilities 10-23
Utilities 10-29
Utilities 10-8
Utilities 10-9
Utilities 10-20

Index-151

MASTER INDEX
LBR utility
universal library file (Cont.)
replacing module
LC command
EDI editor
/LC switch
DMP utility
LC symbolic argument
LCBDF$
LCH field in FAB
CREATE operation
ENTER operation
ERASE operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
$LCKPG (Lock page)
LCL symbolic argument
LCM symbolic argument
/LD switch
PIP utility
LD symbolic argument
LD$xx symbol
required by INTSV$ macro
LE condition test argument
/LE job switch
QUE /MOD command
/LE switch
LBR utility
PRI command
LEAVE statement
LEFT function
Legal I/O function mask
/LENGTH job qualifier
SET QUEUE command
/LENGTH qualifier
BRU utility
PRINT command
Letter-quality printer
Level
indexed files
data
level O, alternate indexes
level O, primary indexes
Level count
listing
LEVEL! INDEX AREA
RMSDES utility
Lexical conditionals
/LGO subkeyword
CLI command
LI command
EDI editor
/LI switch
See also /LIST switch
CMP utility
FLX utility
LBR utility
PIP utility
/BR
/FU
/TB

Utilities 10-27
Utilities 2-35
Utilities 11-6
PDP-11 MACR0-11 6-19
Crash Dump Analyzer B-26
RMS-11 Macros 3-2
RMS-11 Macros 5-13
RMS-11 Macros 5-36
RMS-11 Macros 5-42
RMS-11 Macros 6-24
RMS-11 Macros 5-74
RMS-11 Macros 5-87
RMS-11 Macros 5-104
RMS-11 Macros 5-110
RMS-11 Macros 5-117
RMS-11 Macros 6-53
System Library 8-30
PDP-11 MACR0-11 6-41
PDP-11 MACR0-11 6-19
Utilities 3-17
PDP-11 MACR0-11 6-12
Writing I/O Driver 3-5
Writing I/O Driver 4-35
PDP-11 MACR0-11 6-51
Batch and Queue 2-20
Utilities 10-21
Batch and Queue 2-5
Error Logging 5-35
EDT Editor 2-11, 5-14
Writing I/O Driver 4-12
Batch and Queue 2-20
Utilities 7-18
Batch and Queue 2-5
I/O Drivers 2-4
RMS-11 User's Guide 5-4
RMS-11 User's Guide 5-5
RMS-11 User's Guide 5-5
RMS-11 User's Guide 5-5
PDP-11 MACR0-11 6-9 to 6-10
RMS-11 Utilities 2-41
Error Logging 5-36
MCR Operations 3-37
Utilities 2-35
PDP-11 MACR0-11 8-6
Task Builder 10-25
Utilities 12-3
Utilities 4-7
Utilities 10-21
Utilities 3-24
Utilities 3-25
Utilities 3-25
Utilities 3-26

Ind ex-152

MASTER INDEX
/LI switch {Cont.)
QUE /LI command
VFY utility
ZAP utility
/LI:P switch
QUE /LI command
LIBR
linking to region
option
Librarian Utility
See LBR utility
Library
See also Macro, Object, OTS
building a
cluster

Batch and Queue 2-15
Utilities 9-6
Utilities 15-2
Batch and Queue 2-15 to 2-16
Task Builder 5-14
Task Builder 11-11 to 11-12

building
building example
building rule 1: overlays
building rule 2: references
building rule 3: .STB file
building rule 4: stack
building rule 5: PIC
building rule 6: traps
building rule summary
examples
overlay run-time support
resolving interlibrary
references
command
default file type for
declaring a
default
controlling symbol search
global symbol resolution
specifying a
default search of system
TKB
DIGITAL-supplied
Executive object
inserting
data base object module
device driver
extending a
file
declaring a
FTB
overlaid reg ion
indirect command procedure
macro
maintenance
modules
.FCTR directive
object
designating in TKB
system
using to resolve undefined
global symbols
object module

Task Builder 5-14
Task Builder 5=44
RMS-11 User's Guide 8-7 to 8-9
Task Builder 5-44, 5-48 to 5-51
Task Builder 5-48 to 5-51
Task Builder 5-45
Task Builder 5-46
Task Builder 5-47
Task Builder 5-47
Task Builder 5-47
Task Builder 5-47
Task Builder 5-44
Task Builder 5-47
Task Builder 5-51 to 5-53
Task Builder 5-49
MCR Operations 4-19
MCR Operations 4-20
Task Builder 10-23
Task Builder 10-15, 10-19
Task Builder 3-18
Task Builder 10-15
Program Development 4-2
Program Development 1-9
System Generation (llS) 4-5
System Generation (llS) 4-5
Task Builder 10-17
Task Builder 10-23
Task Builder 5-13
Release Notes 1-28
Command Language 6~41
Program Development 6-1 to 6-3
Program Development 6-10 to 6-11
Task Builder 3-25
Program Development 6-4 to 6-6
Program Development 6-6 to 6-9
Program Development 1-11

placing in overlay structure
obtaining information about a
user

Program Development 6-8 to 6-9
Command Language 6-41
RMS-11 User's Guide 8-1
Task Builder 10-24
Program Development 6-11 to 6-12

Index-153

MASTER INDEX
L i bra r y ( Cont • )
old
overlaid reg ion
OTS
reg ion
specifying
relocation
resident
resident
building and linking to a
data in task image
declaring
installing
label block 0
label block 1
label block 2
label block 3
name block data
relocation
RMS RES
search
resolving references
• FCTR directive
RSX-llS subset FCS resident
search
MACR0-11
TKB
squeezing
supervisor mode
SYS LIB
replacing as default
system
macro (RSXMAC.SML)
modifications to TKB data
structures
system macro
system object
universal
command procedures in
LIBRARY command
DCL
See also LBR
.LIBRARY directive
Library file
See LBR utility
Library file, macro
force search of
including in assembly
/LIBRARY qualifier
Library routine
communication between
placement of
search of
storage
LIBRARY/COMPRESS command
LIBRARY/CREATE command
LIBRARY/DELETE command
LIBRARYiEXTRACT command

Task Builder 5-13
Program Development 7-2
Task Builder 2-20
Task Builder 10-25
Task Builder A-23
Task Builder 5-1, 5-3
RMS-11 User's Guide 8-1, 8-8
Task Builder 5-14, 5-31 to 5-38
Task Builder B-4 to B-6
Task Builder 11-11, 11-28
MCR Operations 3-93
Task Builder B-7
Task Builder B-9
Task Builder B-9
Task Builder B-9
Task Builder B-8
Task Builder A-23
RMS-11 User's Guide 8-6, 8-9
Task Builder 10-23
Task Builder 3-25
System Generation (llS) 4-13
Program Development 1-5, 1-10,
2-7
Program Development 1-11
Program Development 6-3
RMS-11 User's Guide 8-9
Task Builder 10~23
Introduction 4-11, Gloss-18,
Gloss-32
Program Development 1-5
Release Notes 1-30
System Generation (llS) 4-12
System Generation (llS) 4-12
Command Language 6-41
MCR Operations 4-19
Command Language 6-39 to 6-61,
9-21
Program Development 1-9, 6-1
PDP-11 MACR0-11 6-57

PDP-11 MACR0-11 6-20
PDP-11 MACR0-11 8-6
PDP-11 MACR0-11 8-12
System Library 1-1 to 1-2
System Library 1-2
System Library 1-2
System Library 1-2
Command Language 6-42 to 6-43,
9-21
Command Language 6-43 to 6-46,
9-21
Command Language 6-46 to 6-47,
9-22
Command Language 6-47 to 6-48,
9-22
Index-154

MASTER INDEX
Command Language 6-48 to 6-50,
9-22
Command Language 6-50 to 6-53,
9-23
Command Language 6-54, 9-23
Command Language 6-54 to 6-56,
9-23
Introduction 5-3, Gloss-19
Error Logging 2-3
Error Logging 2-6
Crash Dump Analyzer 2-6
PDP-11 MACR0-11 6-39
ODT 2-6, 5-3
Error Logging 2-3, 2-6

LIBRARY/INSERT command
LIBRARY/LIST command
LIBRARY/REMOVE command
LIBRARY/REPLACE command
License
/LIM switch
/LIM switch
/LIMIT
.LIMIT directive
Lim i t reg is t er
Limit switch
Line
definition of
EDT
displaying
length
EDT
number
EDT

Introduction 2-16
EDT Editor 9-12
Introduction 2-16
Introduction 2-4, 2-8 to 2-9,
Gloss-19

pointer
EDT
remote
setting display limit
setting length of
too long to display on screen
truncation
EDT
wrapping
EDT
LINE CHANGE command
EDI editor
Line continuation
DCL
Line editing
abbreviating command
asterisk prompt
creating files in
deleting line
de sc r i pt ion
displaying line
ending a session
1 ine number
locating text
moving line
returning to with CTRL/Z
returning to with EX
starting
Line editing command
CHANGE
CLEAR
COPY
DEFINE KEY
DEFINE MACRO
DELETE
EXIT
FIND
HELP
Implied TYPE (Null)
INCLUDE
INSERT
MOVE

Introduction 2-5, 2-8 to 2-9,
2-13, Gloss-19
I/O Drivers 2-41 to 2-42, 3-31 to
3-32
EDT Editor 9-5
EDT Editor 9-14
EDT Editor 9-12
Introduction 2-16
Introduction 2-16
Utilities 2-35
Command Language 1-11, 3-12
EDT Editor 7-1
EDT Edi tor 2-20, 7-1
EDT Editor 2-20
EDT Edi tor 7-6
EDT Editor 1-7
EDT Edi tor 7-20
EDT Editor 7-8' 7-14
EDT Editor 6-1
EDT Editor 7-8
EDT Edi tor 7-11
EDT Editor 5-8' 7-2
EDT Edi tor 8-10
EDT Editor 2-20, 7-2
EDT Edi tor 1-9
EDT Editor 7-1
EDT Edi tor 7-2
EDT Editor 2-35, 7-3
EDT Edi tor 7-4
EDT Edi tor 7-4
EDT Editor 2-30, 7-6
EDT Editor 2-31, 7-8
EDT Edi tor 7-8
EDT Editor l-3f 7-9
EDT Edi tor 2-23, 7-12
EDT Editor 2-34, 7-10
EDT Edi tor 2-21, 7-11
EDT Editor 2-35, 7-11

Index-155

MASTER INDEX
Line editing command (Cont.)
Null
PRINT
QUIT
QUIT/SAVE
REPLACE
RESEQUENCE
SET and SHOW
SUBSTITUTE
SUBSTITUTE NEXT
TYPE
used in keypad editing
WRITE
Line feed command
LINE FEED function
LINE FEED key
closing location
ODT
displaying word on stack
ODT
generating task list
PMT
opening location
ODT
LINE function
Line mode
EDT
Line number
assigning new
fixed
line editing
resequencing
setting display of
Line printer
definition
list of
LPll
LSll

LVll
options
ready recovery
status return
Line printer listing format
Line Text Editor
See EDI editor
/LINES
/LINES keyword
SET command

VMR
Lines switch
LINK command
DCL
See also TKB
LINK/C81 command
LINK/COBOL command
Linker
Linking
module
ODT

EDT Editor 2-23, 7-12
EDT Edi tor 7-13
EDT Editor 7-14
EDT Edi tor 3-2, 7-14
EDT Editor 2-27, 7-14
EDT Edi tor 2-31, 2-36, 6-3, 7-15
EDT Editor 9-1
EDT Edi tor 2-30, 7-16
EDT Editor 7-19
EDT Edi tor 2-22, 7-20
EDT Editor 5-46
EDT Editor 2-36, 7-22
ODT 2-5, 4-4
EDT Editor 5-28
Command Language 3-13
Program Development 5-5, 5-7
Program Development 5-8
System Management 13-8
Program Development 5-5, 5-7
EDT Editor 5-18
Introduction 2-4, Gloss-19
EDT Editor 1-7
EDT Editor 7-15
EDT Editor 1-7
EDT Editor 6-1
EDT Editor 6-3
EDT Editor 9-6
Introduction 1-14, 3-7, 5-10, 6-2,
Gloss-19
Batch and Queue Gloss-5
I/O Drivers 10-1
I/O Drivers 10-2
I/O Drivers 10-2
I/O Drivers 10-2
System Generation (llM) 4-78
I/O Drivers 10-5
I/O Drivers 10-4 to 10-5
PDP-11 MACR0-11 6-5 to 6-6
Crash Dump Analyzer 2-6
MCR Operations 3-184
System Management 10-51
Crash Dump Analyzer 2-7
Introduction 4-3, 4-7, 4-11
Command Language 6-1, 6-62 to
6-89, 7-4, 9-23 to 9-25
ODT 1-3 to 1-4, 8-1
Program Development 1-5, 4-1, 5-1,
5-9, 6-7
Command Language 6-87 to 6-89,
9-25
Command Language 6-87 to 6-89,
9-25
PDP-11 MACR0-11 1-2, 2-2
Task Builder 2-3
ODT 1-2
Index-156

MASTER INDEX
Linking
ODT (Cont.)
DCL

MCR
PDS
overview of
RSX-llM-PLUS feature
LIST command
EDI editor
List command
• LIST d i r ec ti v e
arguments for
LIST ON PSEUDO DEVICE command
EDI editor
LIST ON TERMINAL command
EDI editor
List option
ACNT
/LIST qualifier
LIST statement
/LIST switch
See also /LIST switch
BAD utility
.LIST TTM directive
Listing
assembly
control
device
specifying
directory
examining at a terminal
format
memory
Trace program
format of
FORTRAN IV
global cross-reference
generating as
printing
sample assembly
spooling
use in debugging
wide
specifying a
Listing control
See also .LIST or .NLIST
directive
comment block
directive
arguments for
• IDENT
.LIST
.NLIST
.PAGE
.REM
.SBTTL
.TITLE
level count
MAC task command
page ejection
switch
,,.,,..,
I

\,,l"\.

/LI
/NL

/NOSP
/SP

ODT 1-3
ODT 1-2
ODT 1-3
PDP-11 MACR0-11 4-1
ODT 1-3
Program Development 2-13
ODT 2-9, 6-4
PDP-11 MACR0-11 6-9 to 6-14
PDP-11 MACR0-11 6-10 to 6-12
Utilities 2-36
Utilities 2-35
System Management 2-6 to 2-7
PDP-11 MACR0-11 8-10
Error Logging 5-39
Utilities 6-5
Program Development 2-6
Program Development 3-4 to 3-5
Program Development 1-4 to 1-5,
2-6
ODT 6-2, 6-5
Program Development 3-9
Program Development 3-6, 7-4
ODT 6-5
ODT 8-2
PDP-11 MACR0-11 6-4
Program Development 7-5
Program Development 4-5 to 4-6
Task Builder 10-11
Program Development 3-8 to 3-9
PDP-11 MACR0-11 H-1 to H-3
Program Development 3-8 to 3-9
Program Development 5-4
Task Builder 10-51

PDP-11 MACR0-11 6-18
PDP-11 MACR0-11 6-3 to 6-18
PDP-11 MACR0-11 6-11 to 6-12
PDP-11 MACR0-11 6-16 to 6-17
PDP-11 MACR0-11 6-9 to 6-14
PDP-11 MACR0-11 6-9 to 6-14
PDP-11 MACR0-11 6-17 to 6-18
PDP-11 MACR0-11 6-18
PDP-11 MACR0-11 6-15 to 6-16
PDP-11 MACR0-11 6-15
PDP-11 MACR0-11 6-9 to 6-10
PDP-11 MACR0-11 8-6 to 8-7
PDP-11 MACR0-11 6-17
PDP-11 MACR0-11 8-6 to 8-7
PDP-11 MACR0-11 8-7
PDP-11 MACR0-11 8-6
PDP-11 MACR0-11 8-6
PDP-11 MACR0-11 8-7
PDP-11 MACR0-11 8-7
Index-157

MASTER INDEX
Listing control directive
arguments for
Li st i ng f il e
FLX utility
PIP utility
Listing level count
LISTING DIRECTIVES argument
Literal-declaration
LITERAL statement
/LN switch
CMP utility
LNOl
/LO job switch
QUE /MOD command
/LO switch
Indirect
RMSCNV utility
RMSIFL utility
VFY utility
LOA command
action if UC.PWF set
effect of
when loading driver
loading driver
$$LOAD
PSECT
reserved PSECT name
$LOAD
predefined syntax element in
MML
LOAD command
command line format
error message
example
keyword
/HIGH
/PAR
/SIZE
pool requirements
VMR

command line format
example
keyword
/PAR
/SIZE
LOAD module
$LOAD routine
in manual load
Load test
UETP
Loadable data base
advantage
assembling
characteristics
Loadable driver
assembling
benefit
combination with data base
debugging
definition
incorporating
with data base
1 inking
with loadable data base
with resident data base
loading
into memory

PDP-11 MACR0-11 6-10
Utilities 4-7
Utilities 3-24
PDP-11 MACR0-11 6-9 to 6-10
PDP-11 MACR0-11 8-11
Error Logging 4-12
Error Logging 5-33
Utilities 12-3
I/O Drivers 10-2
Batch and Queue 2-20
MCR Operations 4-21
RMS-11 Utilities 4-10
RMS-11 Utilities 3-6
Utilities 9-6
Writing I/O Driver 4-35
Writing I/O Driver 2-4
Writing I/O Driver 3-8
Writing I/O Driver 3-2, 3-12
Task Builder 5-53
Task Builder E-3
System Management 12-45
MCR Operations 3-105
MCR Operations 3-105
MCR Operations 3-107
MCR Operations 3-106
MCR Operations 3-106
MCR Operations 3-105
MCR Operations 3-106
MCR Operations 3-107
System Management 10-27
System Management 10-27
System Management 10-28
System Management 10~27
System Management 10-27
Task Builder 5-53
Task Builder 4-7
System Management 9-2
Writing I/O Driver 3-8
Writing I/O Driver 3-9
Writing I/O Driver 3-8
Writing I/O Driver 3-9
Writing I/O Driver 1-1
Writing I/O Driver 3-1
Writing I/0 Driver 3-8
Writing I/0 Driver 1-1
Writing I/0 Driver 3-8

wr;.,;nn
T/n
.....
... -••":J' .... ,

Driver 3-3
Writing I/O Driver 3-3
~

Writing I/O Driver 3-2, 3-12
Index-158

MASTER INDEX
Loadable driver (Cont.)
rebuilding and reincorporating
after debugging
removing
from memory
task-building
mapped system
unmapped system
with resident data base
Loading
asynchronous example of
mechanism
overlay
Loading files
LOC field in ALL block
CREATE operation
EXTEND operation
offset
RSTS/E
summary
/LOC keyword
HELP command
LOC symbolic argument
LOCO field in ALL block
offset
LOCI field in ALL block
offset
LOCAL argument
Local data block
Local macro
definitions
Local symbol
accessing
automatic creation
Begin-End block with
block
enabling
definitions
deleting definition of
reserved
treatment as user-defined
<LOCAL> symbol
LOCATE command
EDI editor

Writing I/O Driver 3-30
Writing I/O Driver 3-2
Writing I/O Driver 3-10
Writing I/O Driver 3-11
Writing I/O Driver 3-12
Task Builder 4-10
Task Builder 3-16
RMS-11 User's Guide 1-10, 1-12
RMS-11 Macros 5-17
RMS-11 Macros 5-47
RMS-11 Macros 6-2
RMS-11 Macros D-4
RMS-11 Macros 6-12
MCR Operations 3-65
PDP-11 MACR0-11 6-11
RMS-11 Macros 6-2
RMS-11 Macros 6-2
PDP-11 MACR0-11 8-9
Program Development 2-8
Program Development 2-8
Program Development 2-8
Introduction 4-7, Gloss-19
PDP-11 MACR0-11 3-11 to 3-12
Program Development 1-4 to 1-5
MCR Operations 4-21
PDP-11 MACR0-11 7-8 to 7-9
MCR Operations 4-3, 4-28
PDP-11 MACR0-11 3-11 to 3-12
PDP-11 MACR0-11 6-19 to 6-20
Program Development 2-7 to 2-8
MCR Operations 4-35
MCR Operations 4-17
PDP-11 MACR0-11 3-7
MCR Operations 4-9
Program Development 2-14, 2-18,
7-4 to 7-5, 7-7
Utilities 2-15, 2-36
I/O Operations 4-13
I/O Operations 1-6
RMS-11 Introduction 4-6

Locate Directory Entry
Locate mode
See also RB$LOC mask in ROP field
GET$
GET$ operations
indexed files
PUT$
relative files
sequential files
Locating text
keypad editing
1 in e ed i ti ng
nokeypad editing ('string')
Location
See also LOC field in ALL block
altering
closing
displaying

I/O Operations 3-18
I/O Operations 3-21
RMS-11 User's Guide 7-7
I/O Operations 3-27
RMS-11 User's Guide 4-13
RMS-11 User's Guide 3-14
EDT Editor 5-21
EDT Editor 7-8
EDT Editor 8-4
ODT 4-1
ODT 4-2
ODT 4-1 to 4-3

Index-159

MASTER INDEX
Location (Cont.)
hard
See also XB$HRD mask in AOP field
RMS DEF utility
RMS-11 Utilities A-14
Location counter
Program Development 1-4 to 1-5
See also Current location
counter
control directive
PDP-11 MACR0-11 6-36
definition
Task Builder A-17
modification
Task Builder A-18
use in debugging
Program Development 5-3 to 5-4
Location indicator
See Register indicator
/LOCK keyword
default value
specifying
MCR Operations 3-121
DISMOUNT command
MCR Operations 3-50
MOUNT command
MCR Operations 3-121
option
No unload
MCR Operations 3-50, 3-121
Unload
MCR Operations 3-51, 3-121
Virtual
MCR Operations 3-51, 3-121
Locked file
Command Language 4-75 to 4-76,
9-47
Locking buckets
RMS-11 Introduction 4-3
Locking, file
See FB$DLK mask in FOP field
Log
Introduction Gloss-19
Log file
disabling
System Management 3-5
example
System Management 3-8
reading
System Management 3-8
reassign i ng
System Management 3-6
task communication to
System Management 3-2
use of log file defaults
System Management 3-6
using PIP to read
System Management 3-8
/LOG keyword
DEVICES command
MCR Operations 3-46
/LOG switch
Error Logging 2-3, 2-5, 2-8
Log switch
Error Logging 2-3, 2-5, 2-8
New version subswitch
Error Logging 2-3, 2-6
No limit subswitch
Error Logging 2-3, 2-5 to 2-6
<LOGDEV> symbol
MCR Operations 4-14
$LOGER
Error Logging 4-23
LOGFILE YES/NO command
!OX
System Management 4-41
Logging
console output
System Management 3-1
messages
Console Logger
System Management 3-2
Logging in
Introduction 1-5 to 1-7, Gloss-20
Command Language 3-2, 4-2
MCR Operations 3-57
disabling
MCR Operations 3-59
Logging out
Introduction 1-21, Gloss-20
Command Language 3-2
MCR Operations 3-31
Logical
address
Task Builder 2-14
address space
Task Builder 2-14
block number
See LBN
end-of-file directive {/)
MCR Operations 4-42
example
MCR Operations 4-43
format
MCR Operations 4-42
name
assigning
MCR Operations 3-16
Index-160

MASTER INDEX
Logical
name ( Cont • )
determining physical device
associated with
syntax
symbol
defining
testing
test
compound
example
unit number
See also LUN
assigning physical device to
a
unit table entry
units
number of
Logical address space
Logical AND operator
special meaning
Logical block
RCT
reading
writing
Logical block number
See LBN
Logical channel number
See LCH field in FAB
Logical device
Logical device name
Logical end-of-tape
Logical I/O
Logical inclusive OR operator
special meaning
Logical name
assigning
Logical operator
See Operator, binary
Logical page
definition
Logical unit number
See also LUN
assigning
changing assignment
parameter to FDOP$A
retrieving
LOGICAL UNIT NUMBERS command

VMR
Logical unit table
See also LUT
Login
See also Logging in
disabling
enabling
silent
specifying
text file

MCR Operations
MCR Operations
MCR Operations
MCR Operations
MCR Operations
MCR Operations
MCR Operations
MCR Operations

4-53
3-16
4-7
4-48
4-39, 4-41
4-38
4-42
4-42

Task Builder 11-7
Task Builder B-9, B-14
Task Builder 11-37
Executive 3-2
PDP-11 MACR0-11 3-2, 3-5
PDP-11 MACR0-11 6-52
RMS-11 Introduction 2-3
System Management 5-2
I/O Drivers 1-28
I/O Drivers 1-29

I/O Drivers 1-18
Crash Dump Analyzer 3-17
I/O Drivers 9-8
I/O Drivers 1-2
PDP-11 MACR0-11 3-2, 3-5
PDP-11 MACRO=ll 6-52
Command Language 5-5, 5-8, 5-13
to 5-15
System Management 10-9

Batch and Queue Gloss-5
I/O Drivers 1-17
I/O Operations 4-12
I/O Drivers 1-7
I/O Operations 2-13
I/O Drivers 1-21
MCR Operations 3-113
System Management 10-29
Command Language 5-8, 5-18 to
5-19

MCR Operations 3-59, 3-184
System Management 10-51
MCR Operations 3-184
System Management 10-51
MCR Operations 3-57
MCR Operations 3-38
MCR Operations 3-60

Index-161

MASTER INDEX
LOGIN command

command line format
error message
example
time 1 imi t
/LOGIN keyword
ASSIGN command
LOGIN. CMD file
LOGIN. TXT file
/LOGON keyword
SET command
VMR
Logout
See also Logging out
silent
specifying
LOGOUT command

LOGTST
ERROR routines
<LOGUIC> symbol
%LOK
Lookahead function
Lost file
recovering
VFY utility
Low core ·memory dump
/LOW switch
PRI command
Low-memory context
/LOWER keyword
SET command
VMR

LOWER CASE argument
Lowercase
character
converting
mode
/LOWERCASE job qualifier
SET QUEUE command
/LOWERCASE qualifier
PRINT command
LP command
EDI editor
LPll

LPAll-K
22-bit addressing
buffer management
device-specific QIO
FORTRAN interface
I/O status block
microcode
time-out
unloading driver
LPSll
LQP02
LRL field in FAB
CREATE operation
offset

Introduction 1-5, Gloss-20
Command Language 3-3 to 3-6, 3-9,
9-25
MCR Operations 3-57
MCR Operations 3-59
MCR Operations 3-62
MCR Operations 3-61
MCR Operations 3-59
MCR Operations 3-17
Command Language 3-4
Command Language 3-4
MCR Operations 3-184
System Management 10-51
MCR Operations 3-31
MCR Operations 3-38
Introduction 1-21 to 1-22,
Gloss-20
Command Language 3-7 to 3-8, 5-13,
5-45, 9-25
Error Logging 4-23
MCR Operations 4-14
Error Logging 5-21
Error Logging 5-21
Utilities 9-6
Crash Dump Analyzer 1-6, 3-2,
3-20
Batch and Queue 2-4
Task Builder B-10
MCR Operations 3-184
System Management 10-51
PDP-11 MACR0-11 8-10
Introduction 1-18
MCR Operations 3-184
System Management 10-51
MCR Operations 4-33
Batch and Queue 2-20
Batch and Queue 2-4
Utilities 2-36
I/O Drivers 10-2
I/O Drivers 21-1
I/O Drivers 21-36
I/O Drivers 21-32 to 21-33
I/O Drivers 21-27 to 21-29
I/O Drivers 21-2 to 21-27
I/O Drivers 21-30 to 21-32
I/O Drivers 21-34 to 21-35
I/O Drivers 21-35
I/O Drivers 21-35
I/O Drivers 16-1 to 16-2
I/O Drivers 2-4
RMS-11 Macros 5-20
RMS-11 Macros 6-24
Index-162

MASTER INDEX
LRL field in FAB (Cont.)
OPEN operation
summary
/LRU keyword
HOME command
INI command
MOUNT command
LSll
LSB symbolic argument
• LST file type
• LST module
$LUIC
predefined syntax element in
MML
LUN

See also Logical unit number
assigning
assignment
changing
displaying
default by TKB
preinitiation processing of
LUN command
command line format
error message
example
VMR
command line format
example
LVll
LVL field in KEY block
DISPLAY operation
offset
OPEN operation
summary
/LW switch
DMP utility
LX:

RMS-11 Macros 5-79
RMS-11 Macros 6-54
MCR Operations 3-72
MCR Operations 3-82
MCR Operations 3-121
I/O Drivers 10-2
PDP-11 MACR0-11 6-19 to 6-20
Program Development 3-4, 6-11,
7-3 to 7-4
Error Logging 4-1
System Management 12-45
Introduction 5-11, Gloss-20
Writing 1/0 Driver 2-19
Command Language 5-5, 5-7, 5-18
to 5-19, 7-57 to 7-58
MCR Operations 2-10
MCR Operations 2-10
MCR Operations 3-143
System Management 10-32
MCR Operations 3-113
System Management 10-29
Program Development 4-4 to 4-5
Writing 1/0 Driver 2-11
MCR Operations 3-113
MCR Operations 3-113
MCR Operations 3-113
MCR Operations 3-113
System Management 10-29
System Management 10-29
System Management 10-29
I/O Drivers 10-2
RMS-11 Macros 5-32
RMS-11 Macros 6-67
RMS-11 Macros 5-80
RMS-11 Macros 6-84
Utilities 11-7
Error Logging 3-2

M
M command
EDI editor
M error
summary
M register
m symbol
/MA switch
RMSCNV utility
MAC command
MCR
See also MACR0-11
.MAC file type
MAC task
See also MACR0-11
command format
cross-reference listing
error message

Utilities 2-38
PDP-11 MACR0-11 2-3, 3-1 to 3-2,
3-8
PDP-11 MACR0-11 D-4
ODT 2-6, 5-3
ODT 2-1
Task Builder 10-26
RMS-11 Utilities 4-10
Program Development 1-4, 3-1, 3-5,
6-3
Program Development 3-1
Program Development 1-4
PDP-11 MACR0-11 8-4 to 8-6
PDP-11 MACR0-11 8-16
PDP-11 MACR0-11 8-19 to 8-21
Index-163

MASTER INDEX
MAC task (Cont.)
listing control
running by indirect command
running directly
Machine code
binary
Macro
See also DEFINE MACRO
call
cross-reference of symbols
resolution
unrecognized
definition
directive
See also .MACRO directive
expansion
terminating
expansion listing
keyword indicator
library
adding modules
creating a user
definitions
DIGITAL-supplied
force search of
including in assembly
listing information
replacing modules
search of system
library directive
See .MCALL directive
name
nesting
SNAP$
SNPBK$
SNPDF$
symbol
definition
symbol table
Macro call
See also .MCALL directive
argument in
assembly time
file-processing
format
numeric argument indicator
run-time
unary operator in
MACRO CALL command
EDI editor
MACRO command

DCL
See also MACR0-11
EDI editor

PDP-11 MACR0-11 8-6 to 8-7
PDP-11 MACR0-11 8-3
PDP-11 MACR0-11 8-2
Introduction 4-5 to 4-6, 4-12,
Gloss-4
EDT Editor 7-4
Introduction 4-13, Gloss-20
RMS-11 Introduction 4-7
PDP-11 MACR0-11 7-1
Program Development 3-7 to 3-8
Program Development 1-4, 1-10,
2-7
Program Development 2-7
EDT Editor 1-5
PDP-11 MACR0-11 7-1
PDP-11 MACR0-11 7~1
PDP-11 MACR0-11 7-3
PDP-11 MACR0-11 6-9
PDP-11 MACR0-11 3-1
Program Development 6-1 to 6-3
Program Development 6-9 to 6-10
Program Development 6-1 to 6-3
Program Development 6-3 to 6-4
Program Development 1-9
PDP-11 MACR0-11 6-20
PDP-11 MACR0-11 8-6
Program Development 6-11 to 6-12
Program Development 6-10 to 6-11
Program Development 1-5, 1-10,
2-7
PDP-11 MACR0-11 7-1
PDP-11 MACR0-11 7-3
Task Builder D-6
Task Builder D-6
Task Builder D-6
PDP-11 MACR0-11 3-6
Program Development 1-4, 1-10,
2-7 ! 6-4
PDP-11 MACR0-11 3-6 to 3-7
I/O Operations 2-2
PDP-11 MACR0-11 7-4
PDP-11 MACR0-11 7-4 to 7-5
I/O Operations 2-2
I/O Operations 2-2
System Generation (llS) 2-23
PDP-11 MACR0-11 7-4
PDP-11 MACR0-11 3-3
I/O Operations 2-2
PDP-11 MACR0-11 7-5
Utilities 2-37
Introduction 4-5, 4-11, 4-13
PDP-11 MACR0-11 8-8 to 8-12
Command Language 6-2 to 6-11,
9-26
Program Development 1-4, 3-1, 3-4,
6-3
Utilities 2-36
Index-164

MASTER INDEX
Macro definition
argument concatenation
argument in
argwuent limit

argument passing
attribute
deletion
dummy argument
error notice
format
keyword argument
name
nesting
single argument
special characters in
.MACRO directive
MACRO EXECUTE command
EDI editor
MACRO IMMEDIATE command
EDI editor
Macro library
RMSMAC.MLB
RSTS/E
Macro MetaLanguage
See MML
Macro name convention
MACR0-11
address mode summary
and ODL files
assembling source file
changes made to
coding standard
/CR
cross-reference listing
/CROSS REFERENCE
data storage
definition
default search of system
library
defining local symbols
directive summary
directives
/DISABLE:GLOBAL
disabling global default
/DS:GBL
error
error code
A
E

u
error code summary
error message
file specification
switch
key segments
/LIBRARY
/LIST
listing
generation
location counter
MAC command

PDP-11 MACR0-11 7-1 to 7-4
PDP-11 MACR0-11 7-10 to 7-11
PDP-11 MACR0-11 7-4 to 7-6
PDP-11 MACR0-11 7-8
PDP-11 MACR0-11 7-7
PDP-11 MACR0-11 7-11 to 7-14
PDP-11 MACR0-11 7-21
PDP-11 MACR0-11 7-2
PDP-11 MACR0-11 7-15 to 7-16
PDP-11 MACR0-11 7-4
PDP-11 MACR0-11 7-9
PDP-11 MACR0-11 7-2
PDP-11 MACR0-11 7-3, 7-5 to 7-6
PDP-11 MACR0-11 7-16
PDP-11 MACR0-11 7-6
PDP-11 MACR0-11 7-1 to 7-2, 7-10
Utilities 2-38
Utilities 2-38
Command Language 6-41
RMS-11 Macros 2-20
RMS-11 Macros D-3
Executive 1-5
Program Development 1-5
RMS-11 User's Guide 1-13
PDP-11 MACR0-11 B-2
RMS-11 User's Guide 8-5
Program Development 3-1 to 3-2
Release Notes 1-33
PDP-11 MACR0-11 E-1 to E-16
Program Development 1-8, 3-8
Program Development 1-5, 1-7, 3-7
to 3-8
Program Development 1-8, 3-7
Program Development 2-8
Program Development 1-5, 1-10,
2-7
Program Development 2-7 to 2-8
PDP-11 MACR0-11 B-3 to B-8
Program Development 1-4 to 1-5
Program Development 3-1
Program Development 3-1 to 3-2
Program Development 3-1
Program Development 3-2 to 3-4
Program Development 3-2 to 3-3
Program Development 3-4
Program Development 3-4
Program Development 3-3
PDP-11 MACR0-11 D-1 to D-5
PDP-11 MACR0-11 8-19 to 8-21
Program Development 3-2, 3-5
PDP-11 MACR0-11 8-3 to 8-5
PDP-11 MACR0-11 8-6
RMS-11 User's Guide 6-7
Program Development 6-3
Program Development 3-1, 3-4 to
3-5, 3-7
Program Development 3-4 to 3-5
Program Development 3-6
Program Development 1-4 to 1-5
Index-165

MASTER INDEX
MACR0-11
MAC command {Cont.)
MCR
macro
cross- reference
library usage
symbol
MACRO command
DCL
/ML
/NOOBJECT
/OBJECT
object module
obsolete functions
operating hints
operating procedures
placement control
populating files
position independent code
source file
cross-referencing symbols
CRF utility
format
skeleton
source input
/-SP
special character summary
s ta temen t format
symbol
cross-reference
evaluation
table of contents generation
work file
MACR0-11 Assembler
MACR0-11 Assembly Language
MACR0-11 calling sequence
manual load
I- and D-space tasks
MACR0-11 programs
increasing FSR size
Macro-declaration macro
Macro-name
defining
MAG
MAG command
format
MAG SET
/BS
/CC
/EOF
/POS
/REWIND
/RS

MAG SET /EQT
MAG SET /EOV
MAG SET /INITIALIZE
MAG SET /POS
MAG SET command
error messages
example

Program Development 1-4, 3-1, 3-5,
6-3
Program Development 3-7 to 3-8
Program Development 6-3 to 6-4
Program Development 1-4, 2-7, 6-4
Program Development 1-4, 3-1, 3-4,
6-3
Program· Development 6-3 to 6-4
Program Development 3-1
Program Development 3-4
Program Development 3-4 to 3-6
PDP-11 MACR0-11 I-1
PDP-11 MACR0-11 F-1
PDP-11 MACR0-11 8-1
RMS-11 User's Guide 6-14
RMS-11 User's Guide 6-27
PDP-11 MACR0-11 G-1
Program Development 2-2
Utilities B-1
Program Development 2-1 to 2-3
Program Development 2-4
Program Development 1-4
Program Development 3-5, 3-8
PDP-11 MACR0-11 B-1
PDP-11 MACR0-11 2-1
Program Development 2-3
Program Development 3-7 to 3-8
Program Development 1-4, 3-1 to
3-2, 6-4
Program Development 2-6
PDP-11 MACR0-11 F-1
Command Language 6-2 to 6-11,
9-26, B-2
Introduction 4-3 to 4-5, 4-12,
Gloss-3 to Gloss-4, Gloss-20
Task Builder 4-7
Task Builder 4-8 to 4-9
I/O Operations 2-40
RMS-11 Macros 2-2
Editor 7-4
I/O Operations G-10

EDT

I/O Operations G-10
I/O Operations G-10
I/O Operations G-11
I/O Operations G-11
I/O Operations G-16
I/O Operations G-12, G-16
I/O Operations G-12
I/O Operations G-11
I/O Operations G-11
I/O Operations G-11
I/O Operations G-11
I/O Operations G-10, G-16
IiO Operations G-i3 to G-i5
I/O Operations G-12
Index-166

MASTER INDEX
Magnetic tape
See Magtape
See Tape
Magnetic Tape ACP
See MTAACP
Mag tape

See also Medi um
See also Tape
access protection
specifying
ANSI

mounting
protection
overriding
specifying
block size
specifying
character translation
specifying
c 1 o s i ng a f i l e
closing volume
density
displaying in !OX
specifying
specifying in !OX
density selection
device-specific QIO
examples
exercise
example
using SELECT
exercising
in !OX
expiration date
overriding
Files-11
initializing
owner
specifying
HDR3 label
specifying
label
list of
mounting

I/O Operations 5-4
Command Language 1-10, 5-4, 5-12,
5-27
I/O Drivers 8-1
RMS-11 Introduction 2-4
RMS-11 Macros 3-2, 5-20, 5-37,
5-43, 5-77, 5-88, 5-104,
5-111, 5-118

MCR Operations 3-77
Command Language 5-4, 5-34 to
5-36
RMS-11 Macros 3-2, 5-20, 5-37,
5-43, 5-77, 5-88, 5-104,
5-111, 5-118
MCR Operations 3-116
MCR Operations 3-122
MCR Operations 3-121
MCR Operations 3-119
MCR operations 3-124
I/O Operations 5-8
I/O Operations 4-25
System Management 4-32
MCR Operations 3-79
System Management 4-32
I/O Drivers 8-15
I/O Drivers 8-4 to 8-9
I/O Operations 5-9 to 5-10
System Management 4-11
System Management 4-11
System Management 4-2
MCR Operations 3-122
MCR Operations 2-1
MCR Operations 3-76
MCR Operations 3-83

MCR Operations 3-120
RMS-11 Introduction 2-5
I/O Drivers 8-2
Command Language 5-38 to 5-40
MCR Operations 3-114
multiple-file operations
I/O Operations 5-6
overriding FCS defaults
I/O Operations 5-6 to 5-7
P/OS
RMS-11 Macros D-3
position to EQT
I/O Operations 4-25
positioning
I/O Operations 5-5, G-11
See also FB$NEF mask in FOP field
See also FB$POS mask in FOP field
See also RB$EOF mask in ROP field
processing examples
I/O Operations 5-7
reading a file
I/O Operations 5-8
reading IBM
I/O Operations G-18 to G-19
Index-167

MASTER INDEX
Magtape (Cont.)
record
number of characters
specifying
type
specifying
records tested
retries upon error
rewind-after-closing
See FB$RWC mask in FOP field
rewind-before-creating
See FB$RWO mask in FOP field
rewind-before-opening
See FB$RWO mask in FOP field
rewinding
rewinding file on
RMSBCK utility
multi volume
RMSCNV utility
RMSDEF utility
RMSDES utility
RMSDSP utility
RMSRST utility
sel,ect recovery
set
naming
single-file operations
standard QIO
status return
tape mark
testing
altering record count
translation
unlabeled
specifying
vol tnne
Magtape ACP
See MTAACP
Magtape block size
See BLS field in FAB
Magtape Control Task
Mag tape position
Magtape volume
access
ANSI
creating multiple file
labeled
rewinding
unlabeled
Magtape volume set
rewinding
MAGTAPE BLOCK SIZE
RMSDES util Tty
/MAIN keyword
SET command
VMR
MAIN text buff er
inserting text into
.MAIN. default name
Maintaining files
backinq uo files
converting files
designing and creating files
displaying files

MCR Operations 3-123
MCR Operations 3-119
System Management 4-51
System Management 4-54

I/O Operations 4-25
I/O Operations 4-25
RMS-11 Utilities 6-7
RMS-11 Utilities 6-9
RMS-11 Utilities 4-8
RMS-11 Utilities A-8, A-10
RMS-11 Utilities 2-34
RMS-11 Utilities 5-3
RMS-11 Utilities 7-8 to 7-9
I/O Drivers 8-13
MCR Operations 3-116
MCR Operations 3-117
I/O Operations 5-5
I/O Drivers 8-4
I/O Drivers 8-10 to 8-12
RMS-11 Introduction 2-5
System Management 4-51
I/O Operations G-16
MCR Operations 3-121
RMS-11 Introduction 2-5

I/O Operations G-10
I/O Operations 2-15
!/O Operations 5-4
Command Language 5-4, 5-34 to
5-36
I/O Operations 5-6
Command Language 1-10, 5-4, 5-12,
5-35 to 5-36
I/O Operations 5-5
Command Language 5-4, 5-35 to
5-36

I/O Operations 5-5
RMS-11 Utilities 2-34
MCR Operations 3-185
System Management 10-51
EDT Editor 1-2
EDT Editor 2-1, 6-6
PDP-11 MACR0-11 6-15
RMS-11 User's Guide 1-10,
RMS-11 User's Guide 1-10;
RMS-11 User's Guide 1-10,
RMS-11 User's Guide 1-10,
RMS-11 User's Guide 1-10,
Index-168

1-12
1-12
1-12
1-12
1-12

MASTER INDEX
Maintaining files {Cont.)
loading files
restoring files
Manual load
calling sequence
error handling
FORTRAN calling sequence
for I- and D-space task
MACR0-11 calling sequence
I- and D-space tasks
/MANUAL switch
BAD utility
FMT utility
Map
common

RMS-11 user's Guide 1-10, 1-12
RMS-11 User's Guide 1-10, 1-12
Task Builder 4-7 to 4-8
Task Builder 4-12
Task Builder 4-9 to 4-10
Task Builder 4-11
Task Builder 4-7
Task Builder 4-8 to 4-9
Utilities 6-6
Utilities 5-8

debugging use

examining at terminal
file
adding cross-reference to a
content
description
example
general
inhibiting spooling of a
printing
specifying
full

generating
including SYSLIB contribution
privileged task
reducing width
reg ion
resident reg ion
including symbol definition
short
specifying a
spooling to print
stack limits
standard
task
linked to a common
Map Address Window directive
Map device
.MAP file type
MAP macro
MML
MAP$
Mapped
array
area
declaration
declaration entry
baseline system
bootstrapping
reg ion
declaring address window
system
definition
Mapped system
<MAPPED> symbol
Mapping
APRO
concept
DCL to MCR
I/O page
privileged tasks

Task Builder 5-19
Program Development 5-2, 5-8
Program Development 4-6
Task Builder 10-11
Task Builder 10-37 to 10-43
Task Builder 10-37 to 10-43
Task Builder 10-37 to 10-43
Task Builder 10-37 to 10-43
Task Builder 10-45
Task Builder 1-2
Task Builder 10-26
Program Development 4-7
Program Development 4-5 to 4-7
Task Builder 10-26
Task Builder 6-10 to 6-11
Program Development 4-5 to 4-6
Task Builder 5-19
Task Builder 10-26
Task Builder 10-37 to 10-43
Task Builder 10-45
Program Development 5-8
Program Development 4-5 to 4-6
Task Builder 5-24
Executive 5-100
System Generation (llM) 4-21
Program Development 4-6
System Management 12-31 to 12-34
Executive 5-101
Task Builder 5-56, 5-58
Task Builder A-10
Task Builder A-10
System Generation {llM) 4-2
Task Builder 11-39
Task Builder 2-14, 2-18
System Generation (llM) 1-5
Executive 3-2
MCR Operations 4-9
Executive 3-19
Task Builder 2-22
System Management 12-20 to 12-25,
12-34
Executive 3-19
Executive 3-19

Index-169

MASTER INDEX
Mapping (Cont.}
task
Mapping con text
Mapping pointer
file window
allocating
Mapping register assignment block
allocating
figure
.MARK
Mark Time directive
Mark time request
Mark-for-deletion
See FB$MKD mask in FOP field
Mask register
Mask symbol
See Code and mask symbol
Mass insertion

Task Builder 2-15
Executive 5-86
MCR Operations 3-74, 3-84, 3-127
Writing I/O Driver B-2
Writing I/O Driver B-3
I/O Operations 4-18 to 4-19
Executive 5-103
Crash Dump Analyzer 3-50
ODT 2-6, 5-3
RMS-11 User's Guide 2-18, 6-28,
7-9

See also RB$MAS mask in ROP field
populating indexed files
RMS-11 User's Guide 6-29
RMSCNV utility
RMS-11 Utilities 4-10
Mass-storage device
Introduction 1-13, 3-2, 3-8, 5-6,
5-11, Gloss-21
RMS-11 Introduction 2-1
errors
Error Logging 1-1
Master command table
DCL
System Management 12-6 to 12-12,
12-17 to 12-20, 12-46 to
12-47
Master File Directory
I/O Operations 5-2
See also MFD
Master File Directory Header
I/O Operations E-2
Match criterion
RMS-11 Introduction 3-12
See also RB$KGE mask in ROP field
See also RB$KGT mask in ROP field
random access
RMS-11 User's Guide 5-13
MAXBUF option
Task Builder 11-23
/MAXEXT keyword
SET command
MCR Operations 3-187
VMR
System Management 10-53
/MAXIMUM qualifier
BRU utility
Utilities 7-18
Maximum record number
See also MRN
RMSDEF utility
RMS-11 Utilities A-9
Maximum record size
RMSDEF utility
RMS-11 Utilities A-9
/MAXPKT keyword
SET command
MCR Operations 3-188
/MB switch
CMP utility
Utilities 12-3
MBC
RMS-11 User's Guide 2-17
sequential files
RMS-11 User's Guide 3-15
MBC field in RAB
CONNECT operation
RMS-11 Macros 5-6
off set
RMS-11 Macros 6-115
summary
RMS-11 Macros 6-125
MBF field in RAB
CONNECT operation
RMS-11 Macros 5-6
offset
RMS-11 Macros 6-115
summary
RMS-11 Macros 6-126
.MBLUN
reserved global symbol
Task Builder E-1
MC command
Utilities 2-37
EDI editor
Index-170

MASTER INDEX
/MC switch
Indirect
MC symbolic argument
.MCALL assembler directive
.MCALL directive

usinq with user macro library
MCL symbolic argument
MCR

CLI default
command
summary
testing in UETP
command line
creating saved answer file
inhibit execution
Phase I
Phase I I
PREPGEN
interface
linking
debugger
ODT

ODTID
supervisor libraries
mapping to DCL
mode
multiuser
correction to on unmapped
system
relationship with VMR
source module
updating
terminal
specifying
using
suppress messages from QMG
MCR command
MCR dispatching algorithm
/MCR keyword
HELP command
SET command
MCR Operations Manual
note to
technical changes
MCR qualifier
MCR RUN support
MCR SSM command
See SSM command
MCR unit control block
/MD switch
DMP utility
MD symbolic argument
.MDELETE directive
/ME switch
PIP utility
ME symbolic argument

MCR Operations 4-19
PDP-11 MACR0-11 6-11
RMS-11 Macros 2-2
PDP-11 MACR0-11 7-20
Program Development 1-10, 2-6 to
2-7' 3-3
I/O Drivers 1-17
Program Development 6-3 to 6-4
PDP-11 MACR0-11 6-20
EDT Editor 2-2
Introduction 1-5, 1-8, 4-1,
Gloss-21
Command Language 1-1 to 1-2, B-1
Program Development 1-1 to 1-3
System Management 7=1, 7=12 to
7-13, 11-1 to 11-2, 11-5,
12-1, 12-20 to 12-25, 12-34
System Management 2-3
MCR Operations 1-5
System Management 9-3
EDT Editor 4-4
System Generation (llM) 3-11
System Generation (llM) 4-4
System Generation (llM) 5-4
System Generation (llM) 3-11
MCR Operations 1-5

ODT 8-1
ODT 1-2
ODT 1-3
ODT 1-4
System Management 12-20 to 12-25,
12-34
MCR Operations 4-32
Release Notes 1-35
System Management 10-1
Release Notes 1-42
MCR Operations 3-189
Release Notes 1-36
Command Language 1-7, 9-25
Executive 5-5
MCR Operations 3-66
MCR Operations 3-189
Release Notes 1-48
Release Notes 1-6
EDT Editor 4-6
System Generation (llM) 4-29
Crash Dump Analyzer 3-26
Utilities 11-7
PDP-11 MACR0-11 6-11
PDP-11 MACR0-11 7-21
Utilities 3-9, 3-28
PDP-11 MACR0-11 6-11
Index-1 71

MASTER INDEX
MEB symbolic argument
Medium

PDP-11 MACR0-11 6-11
Introduction 5-11 to 5-12,
Gloss-21
RMS-11 User's Guide 2-3

and I/O time
and record formats and
file organizations
and variable-length format
disk
file specification
retrieval pointers
usage
mag tape
file specification
placement control
sequential files
unit-record device
Member Number Identification
definition
Memory

RMS-11 User's Guide 1-20
RMS-11 User's Guide 2-15
RMS-11 User's Guide 1-18
RMS-11 User's Guide A-1
RMS-11 User's Guide 8-11
RMS-11 User's Guide 8-13
RMS-11 User's Guide 1-18
RMS-11 User's Guide A-4 to A-5
RMS-11 User's Guide 6-13
RMS-11 User's Guide 3-3
RMS-11 User's Guide 1-18, A-1

accessing
allocation file
See Map file
available
displaying
cache
compacting space
See SHF
display
See RMD
dump
fill command
image
layout
unmapped system
limit register
list command
listing format
management
PLAS directives
specifying for target system
maximum size of
parity support
physical
disk-resident overlay
memory-resident overlay
overlay
processor memory size
reducing to build a task
reducing usage of
requirement
resident overlay structure
saving
maximum size
determining
overlaid task
restriction
search
search command
Memory allocation
Memory allocation file
See Map
Memory errors
error logging

System Management B-2
Introduction 5-4, 5-6, 5-9,
Gloss-21
MCR Operations 3-137

System Generation (llS) 2-22
System Generation (llM} 4-16

Task Builder D-1
ODT 2-9, 6-4
Task Builder 2-8 to 2-9
Task Builder 2-16
ODT 2-6, 5-3, 6-1
ODT 2-9, 6-4
ODT 6-5
System Generation (llM) 4-24
Task Builder 10-27
System Management 10-41
System µeneration (llM) 4-15
Task Builder 3-3 to 3-4
Task Builder 3-6
Task Builder 3-5, 3-32 to 3-34
System Generation (llM) 4-11
Task Builder F-4
Task Builder 3-1
System Generation (llS) 1-3
Task Builder 3-6
System Generation (llS) 2-17
System Generation (llS} 2-16
System Generation (llS) 2-17
Task Builder 3-9 to 3-10
System Generation (llS) 2-17
ODT 6-3
ODT 2-8, 2-10 to 2-11
PDP-11 MACR0-11 6-46
Error Logging 1-1
Error Logging 1-6

Index-172

MASTER INDEX
Memory management
See also Virtual memory
management
core blocks release ($RLCB)
core blocks request ($RQCB)
directives
fixing tasks
on RSX-llS
initialize ($INIDM)
use by task
Memory Management Unit
Memory word
Memory-resident
.overlay
loading
overlay
task
/MEMSIZ
<MEMSIZ> symbol
MERGE
See CONVERT command
Merged string
Merging file
PIP utility
/MESSAGE
keyword
CLI command
subkeyword
CLI command
Message
Basic MCR
di agnostic
eliminating
error
virtual memory system
Indirect
inhibiting system queuing of
invocation
MCR
MCR command
ABORT
ACS
ALLOCATE
ASSIGN
BOOT
BROADCAST
BYE
CLI
DISMOUNT
FIX
FLA
HELLO
HELP
HOME
INI
INSTALL
LOAD
LOGIN
LUN
MOUNT
OPEN
REASSIGN
REDIRECT

System Library 7-1
Executive 3-1 to 3-3, 3-11
System Library 7-4
System Library 7-3
Executive 3-8 to 3-10
Release Notes 3-1
System Library 7-2
Task Builder 2-15 to 2-16
Task Builder 2-14
Introduction Gloss-36
Task Builder 4-1
Task Builder 3-1
RMS-11 User's Guide 1-13, 8-3,
8-6
Introduction 5-7, 5-9, Gloss-2
Crash Dump Analyzer 2-6
MCR Operations 4-11
RMS-11 Macros 3-3
Utilities 3-9
MCR Operations 3-39
MCR Operations 3-38
System Generation (llS) 2-4
Task Builder 10-30
Command Language A-1
Task Builder H-1
Task Builder F-5
MCR Operations 4-57
Task Builder 10-35
ODT 1-4
MCR Operations A-1
MCR Operations 3-4
MCR Operations 3-9
MCR Operations 3-13
MCR Operations 3-18
MCR Operations 3-25
MCR Operations 3-30
MCR Operations 3-32
MCR Operations 3-40
MCR Operations 3-51
MCR Operations 3-54
MCR Operations 3-56
MCR Operations 3-62
MCR Operations 3-69
MCR Operations 3-75
MCR Operations 3-85
MCR Operations 3-98
MCR Operations 3-107
MCR Operations 3-62
MCR Operations 3-113
MCR Operations 3-128
MCR Operations 3-138
MCR Operations 3-143
MCR Operations 3-144
Index-173

MASTER INDEX
Message
MCR command (Cont.)
REMOVE
RESUME
RUN
SAVE
SET
TAS
UFO
UNFIX
UNLOAD
OTL
recording
by Console Logger
RMSBCK utility
RMSCNV utility
RMSDEF utility
RMSDES utility
RMSDSP utility
RMSIFL utility
RMSRST utility
sending
time 1 imi t
SIP
size for console output
summary
time-stamping
by Console Logger
TKTN

VMR
Message formatting
ASCII string
carriage return/line feed
insertion
date conversion ($DAT)
edit directive ($EDMSG)
extended ASCII
field mark
file name string
form feed insertion
general
space insertion
length of

time conversion ($TIM)
upper case text ($CVTUC)
MESSAGE statement
Message-oriented communication
device-specific QIO
driver
full-duplex
half-duplex
redundancy checking
standard QIO
status return
transmission validation
Messages
ER LC FL
Metalanguage
general description
.MEXIT directive
MFD

contents

MCR Operations 3-146
MCR Operations 3-147
MCR Operations 3-156
MCR Operations 3-160
MCR Operations 3-209
MCR Operations 3-216
MCR Operations 3-220
MCR Operations 3-222
MCR Operations 3-223
System Generation (llS) 2-10
System Management 3-2
RMS-11 Utilities C-1
RMS-11 Utilities C-1
RMS-11 Utilities A-20
RMS-11 Utilities 2-52
RMS-11 Utilities C-1
RMS-11 Utilities C-1
RMS-11 Utilities C-1
MCR Operations 3-27
MCR Operations 3-27
System Generation (llS) 2-17
System Management 3-2
System Generation (llS) A-1
System Management 3-2
System Generation (llS) 2-19
MCR Operations 3-5, A-1
System Management 10-76
System Library 6-1
System Library 6-7
System Library 6-9
System Library 6-2
System Library 6-5
System Library 6-8
System Library 6-12
System Library 6-11
System Library 6-8
System Library 6-5
System Library 6-10
System Library 6-12
System Library 6-3
System Library 6-1
Error Logging 5-41
I/O Drivers 12-5 to 12-7
I/O Drivers 12-1
I/O Drivers 12-11
I/O Drivers 12-11
I/O Drivers 12-11
I/O Drivers 12-5
I/O Drivers 12-8 to 12-10
I/O Drivers 12-11
Error Logging 5-44
System Management 12-12
System Management 12-13 to 12-15
PDP-11 MACR0-11 7-3
Introduction 5-12, Gloss-11,
Gloss-21
Command Language 4-1: 5-11: 5-65
MCR Operations 2-2
MCR Operations 2-2
Index-1 74

MASTER INDEX
/MH switch
LBR utility
Mini-Reference
~~~~-;~~1

\...l\;;''""iJ.i14'-"0.~

Utilities 10-22

~~~-~~~

'-".i.10.11~

'C't:>

Minus operator
Minus sign {-) command
EDT
Minus sign (-) operator
Misplaced word
correcting with DEL W and UND W
Mistake
correcting after COMMAND:
prompt
typing
Mixed MASSBUS configuration
/ML assembler switch
/ML switch
RMSCNV utility
ML-11
.MLB file type
/MM switch
MML
AND macro
BC macro
BCT macro
BS macro
BST macro
CBM macro
CCBM macro
COP macro
DIR macro
DMAP macro
ERR macro
HLP macro
MAP macro
NO macro
OCOP macro
OPT macro
OPTR macro
predefined syntax elements
PRO macro
QUA macro
TST macro
Mnemonic
Mode
See also Access mode
See also Address mode
See also Record transfer mode
change
EDT
compatibility
in a task
Indirect operating
disabling
enabling
initial setting
list
testing
line
EDT
Modem
Modify option
ACNT
Modifying
commands
DCL

PDP-11 MACR0-11 3-4
Introduction 2-13 to 2-14
ODT 2-3 to 2-4
EDT Editor 5-29
EDT Editor 5-47
Introduction 1-8 to 1-9
Error Logging 4-33
RMS-11 Macros 2-20
PDP-11 MACR0-11 8-6 to 8-7
RMS-11 Utilities 4-11
I/O Drivers 5-4
Program Development 6-1
Task Builder 10-27
System Management 12-5 to 12-6,
12-9, 12-15 to 12-17
System Management 12-25 to 12-26
System Management 12-26
System Management 12-27
System Management 12-26
System Management 12-27 to 12-28
System Management 12-28
System Management 12-28
System Management 12-29
System Management 12-30
System Management 12-31 to 12-34
System Management 12-30
System Management 12-31
System Management 12-31 to 12-34
System Management 12-35
System Management 12-29
System Management 12-35 to 12-36
System Management 12-35 to 12-36
System Management 12-39 to 12-45
System Management 12-36 to 12-37
System Management 12-37 to 12-38
System Management 12-39
Introduction Gloss-21

Introduction 2-3, 2-17, Gloss-6
Task Builder 10-8
MCR Operations 4-31
MCR Operations 4-32
MCR Operations 4-32
MCR Operations 4-32
MCR Operations 4-40
Introduction 2-4, Gloss-19
I/O Drivers 2-42, 3-32
System Management 2-5 to 2-6
System Management 12-12

Index-175

MASTER INDEX
Modularity
program
Module
extracting from library
1 inking
name
name entry format
object
extracting by name
1 inking
patching
placing in segment
reducing overhead
record
end of
source
DCL
updating
Executive
updating
MCR
updating
Module name
table
macro library
object library
MODULE statement
Module version
.MOLUN
reserved global symbol
Monitor
level
Monitor Console Routine
See MCR
MOU command
/MOU keyword
SAVE command
MOUNT command

command line format
ANSI magtape
Files-11
error message
example
keyword
/ACP
ANSI magtape
/BS
/CC
/DENS
/EXT
Files-11
/FOR
/FPRO
/HDR3
/LABEL
/LOCK
/LRU
/OVR
/OVRACC
/OVREXP
/O'\lRSFID

/PARM

PDP-11 MACR0-11 6-43
Task Builder 10-23
Task Builder 2-3
Task Builder A-4
Task Builder A-4
Task Builder F-4
Task Builder 2-1
Release Notes 1-47
Task Builder F-4
Task Builder A-24
Release Notes 1-46
Release Notes 1-40
Release Notes 1-42
Program Development 2-3, 2-5, 6-5
to 6-7
Program Development 6-9 to 6-10
Program Development 6-2 to 6-3
Program Development 6-5, 6-7
Error Logging 5-32
Program Development 2-5
Task Builder E-1
Introduction Gloss-22
Introduction 2-2, 3-7
MCR Operations 3-114
MCR Operations 3-160
Command Language 5-4, 5-9, 5-12
to 5-13, 5-26 to 5-42, 9-27
to 9-28
MCR Operations 3-114
MCR Operations
MCR Operations
MCR Operations
MCR Operations

3-116
3-115
3-128
3-127

MCR Operations 3-118
MCR Operations 3-118
MCR Operations 3-119
MCR Operations 3-ii9
MCR Operations 3-119
MCR Operations 3-119
MCR Operations 3-116
MCR Operations 3-120
MCR Operations 3-120
MCR Operations 3-120
MCR Operations 3-121
MCR Operations 3-121
MCR Operations 3-121
MCR Operations 3-122
MCR Operations 3-122
MCR Operations 3-122
MCR Operations 3-i22
MCR Operations 3-123
Index-176

MASTER INDEX
MOUNT command
keyword (Cont.}
IT""loT"\"

I t't\U

/PUB
/RS
/SHARE
/TR
/UIC
/UNL
/VI
/VOL
/WAIT
/WIN

/WRITE
supported device
/MOUNTED qualifier
BRU utility
Mounted volume
MOVE command
EDT
Move mode
GET$
GET$ operations
i nd ex ed f il es
PUT$
relative files
sequential files
Moving
text
EDT
Moving the cursor
keypad editing
no keypad editing
/MP switch
$MPUB1 routine
use of
to obtain UMRs
$MPUBM routine
use of
to obtain UMRs
.MRKDL
$$MRKS
PSECT
reserved PSECT name
MRKT$
MRL field in KEY block
DISPLAY operation
off set
OPEN operation
summary
MRN
relative files
MRN field in FAB
CREATE operation
offset
OPEN operation
summary
MRS field in FAB
CREATE operation
offset
OPEN operation
summary
MSCP disk
RCT
address space
bad block handling

""----.L...!.
- - MCR Upt:a
ClLJ.Ull::i

""\

"""'""\

.:>-.LL..)

MCR Operations 3-123
MCR Operations 3-123
MCR Operations 3-124
MCR Operations 3-124
MCR Operations 3-124
MCR Operations 3-125
MCR Operations 3-125
MCR Operations 3-126
MCR Operations 3-126
MCR Operations 3-127
MCR Operations 3-127
MCR Operations 3-114
Utilities 7-18
Command Language 5-9, 5-13
EDT Editor 2-35, 7-11
Introduction 2-10 to 2-11
I/O Operations 1-6
RMS-11 Introduction 4-6
I/O Operations 3-18
I/O Operations 3-21
RMS-11 User's Guide 7-7
I/O Operations 3-26
RMS-11 User's Guide 4-12
RMS-11 User's Guide 3-13
Introduction 2-11
EDT Editor 2-9, 5-12 to 5-21
EDT Editor 2-37, 8-13
Task Builder 10-28
Writing I/O Driver 5-20, B-3
Writing 1/0 Driver B-1
Writing I/O Driver 5-19, B-3
Writing I/O Driver B-1
I/O Operations 4-23
Task Builder 5-52
Task Builder E-3
Executive 5-103
RMS-11 Macros 5-32
RMS-11 Macros 6-68
RMS-11 Macros 5-80
RMS-11 Macros 6-85
RMS-11 User's Guide 1-19
RMS-11 User's Guide 4-4 to 4-5
RMS-11 Macros 5-13
RMS-11 Macros 6-24
RMS-11 Macros 5-79
RMS-11 Macros 6-55
RMS-11 Macros 5-12
RMS-11 Macros 6-24
RMS-11 Macros 5-79
RMS-11 Macros 6-56
System Management 5-2
System Management 5-3
Index-177

MASTER INDEX
MSCP60
MSCP80
MSC PAT
MSC PE
MSC PEN
MSCPSD
MSC PTO
MTAACP
MTADF$
$MUL {Integer multiply)
Multi-line input
Multiblock count
See MBC
See MBC field in RAB
Multibuffer count
See MBF field in RAB
Multicontroller driver
conditional code description
conditional code example
Multidirectory device
See FB$MDI mask in DEV field
Multiple
buffer
file
Multiple access streams
and shared access
I/O techniques
indexed files
relative files
sequential files
Multiple areas
RMSDES utility
Multiple buffer count
parameter to FDBF$A
parameter to FSRSZ$
Multiple buffering
effect on FSRSZ$
read-ahead
type of
versus single buffering
write-behind
Multiple buffers
indexed files
relative files
sequential files
Multiple definition error
See M error
Multiple expression
Multiple keys
RMSDES utility
Multiple label
Multiple symbol
Multiple-buffered record I/O
Multiple-tree
example
structure
defining a
Multi pl ex er
asynchronous serial line
Q BUS
Multiplication operator
Multiply routine
double-precision multiply
{$DMUL)
multiply {$MUL)
Multiprogramming

Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Command Language 5-34, 5-38 to
5-40
Crash Dump Analyzer B-27
System Library 3-1
Task Builder 1-3

Writing I/O Driver 2-10
Writing I/O Driver 4-33
Writing I/O Driver 4-34

EDT Editor 1-8, 2-32
EDT Editor 1-8, 2-32
RMS-11 User's Guide 2-9 to 2-10
RMS-11 User's Guide 2-17
RMS-11 User's Guide 7-10
RMS-11 User's Guide 4-15
RMS-11 User's Guide 3-15
RMS-11 Utilities 2-7, 2-43
I/O Operations 2-18
I/O Operations 2-38
I/O Operations 1-6 I 3-10
I/O Operations 2-37
I/O Operations 1-7 I 2-18
I/O Operations 2-18
I/O Operations 1-7
I/O Operations 2-19
RMS-11 User's Guide 2-18
RMS-11 User's Guide 7-9
RMS-11 User's Guide 4-15
RMS-11 User's Guide 3-14
PDP-11 MACR0-11 2-4
RMS-11 Utilities 2-7, 2-38
PDP-11 MACR0-11 2-2
PDP-11 MACR0-11 2-4
I/O Operations 3-10
Task Builder 3-31
Task Builder 3-30 to 3-31
Task Builder 3-30 to 3-31
I/O Drivers 2-40, 3-29 to 3-30
I/O Drivers 2-40
PDP-11 MACR0-11 3-2, 3-5
System Library 3-3
System Library 3-1
Introduction 5-8, Gloss-22
Index-178

MASTER INDEX
Multisegment task
See Overlay
u •• 1~.:
.• - - t•tu..1..
1...1.u;::,o::::L

Syste• Generation (llM} 4-26

protection
system
tailoring
Multiuser system
Multiuser task
MUNG qualifier
EDIT command

System Generation (llM} 6-8, 6-18
Introduction 5-1
Command Language 6-73

/MXF keyword
HOME command
INI command

MCR Operations 3-73
MCR Operations 3-82

Command Language 4-20 to 4-22,
9-16

N
ODT 2-10, 6-3
PDP-11 MACR0-11 3-15
PDP-11 MACR0-11 D-4
ODT 2-1 to 2-2
Writing 1/0 Driver B-4
RMS-11 Macros 2-9
RMS-11 Macros C-2
RMS-11 Macros 7-3, 7-7, 7-11,
7-15

N command
N error
summary
n symbol
N$$UMR symbol
N$-family macro
declaring
example
N.OVPT
low-memory context
reserved global symbol
N.STAT
wildcard .FIND operations
NAM block
chaining to FAB
declaring
file specification
identification by
See FB$FID mask in FOP field
initializing
summary
NAM field in FAB
chaining NAM block to FAB
CREATE operation
ENTER operation
ERASE operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
NAM$B macro
example
NAM$E macro
declaring
example
NAME
RMSDES utility
file section
key section
Name
file
default
global symbol

Task Builder B-10
Task Builder E-1
I/O Operations 4-11, B-3 to B-4
I/O Operations 4-13
RMS-11 Introduction 4-8
RMS-11 Macros 2-12
RMS-11 Macros 2-8
RMS-11 User's Guide A-6
RMS-11 Macros 2-9
RMS-11 Macros 6-94
RMS-11 Macros 2-12
RMS-11 Macros 5-9
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 6-24
RMS-11 Macros 5-72
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-57
RMS-11 Macros 2-8, C-2
RMS-11 Macros 7-3, 7-7' 7-11,
7-15
RMS-11 Macros 2-9
RMS-11 Macros C-2
RMS-11 Macros 7-3, 7-7, 7-11,
7-15
RMS-11 Utilities 2-31
RMS-11 Utilities 2-38
RMS-11 User's Guide A-2
RMS-11 User's Guide A-6
Task Builder A-6

Index-179

MASTER INDEX
.NAME directive
attribute
OSK
GBL
NODSK
NOGBL
example of use of
/NAME keyword
HOME command
/NAME qualifier
SHOW QUEUE command
/NAME:jobname qualifier
PRINT command
Named variable
NAMOF$ macro
.NARG directive
example
NB condition test argument
NB$-family symbol
declaring
NB$DEV mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value
NB$DIR mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value
NB$NAM mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
(set if NB$QUO is set)
REMOVE operation
RENAME operation
value
NB$NOD mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value
NB$QUO mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value

Task Builder 3-26
Task Builder 3-27
Task Builder 3-27
Task Builder 3-27
Task Builder 3-27
Task Builder 3-27
MCR Operations 3-73
Batch and Queue 2-16
Batch and Queue 2-4
Error Logging 5-8
RMS-11 Macros C-2
PDP-11 MACR0-11 7 -11
PDP-11 MACR0-11 7-12
PDP-11 MACR0-11. 6-52
RMS-11 Macros C-2
RMS-11 Macros 5-21
RMS-11 Macros 5-37
RMS-11 Macros 5-43
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-105
RMS-11 Macros 5-111
RMS-11 Macros 6-94
RMS-11 Macros 5-21
RMS-11 Macros 5-37
RMS-11 Macros 5-43
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-105
RMS-11 Macros 5-111
RMS-11 Macros 6-94
RMS-11 Macros 5-21
RMS-11 Macros 5-37
RMS-11 Macros 5-43
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-105
RMS-11 Macros 5-111
RMS-11 Macros 6-94
RMS-11 Macros 5-21
RMS-11 Macros 5-37
RMS-11 Macros 5-43
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-105
RMS-11 Macros 5-111
RMS-11 Macros 6-94
RMS-11 Macros 5-21
Macros 5-37
RMS-11 Macros 5-43
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-105
RMS-11 Macros 5-111
RMS-11 Macros 6-94
RMS-11

Index-180

MASTER INDEX
NB$TYP mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
{set if NB$QUO is set)
REMOVE operation
RENAME operation
value
NB$VER mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value
NB$VER mask in FNB field of NAM
RSX-11
NB$WCH mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
value
wildcard loop
NB$WDI mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value
NB$WNA mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value
NB$WTY mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
value
NB$WVE mask in FNB field
CREATE operation
ENTER operation
ERASE operation
OPEN operation
PARSE operation
REMOVE operation

RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-21
5-37
5-43
5-81

RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-88
5-105
5-111
6-94

RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-21
5-37
5-43
5-81
5-88
5-105
5-111
6-94

RMS-11 Macros D-3 to D-4
RMS-11 Macros 3-9 to 3-10
RMS-11 Macros 5-21
RMS-11 Macros 5-38
RMS-11 Macros 5-41, 5-43
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-103, 5-105
RMS-11 Macros 5-109, 5-112
RMS-11 Macros 5-116' 5-118
RMS-11 Macros 6-102
RMS-11 Macros 6-94
RMS-11 Macros 3-10
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-21
5-37
5-43
5-81
5-88
5-105
5-111
6-94

RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-21
5-37
5-43
5-81
5-88
5-105
5-111
6-94

RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros

5-21
5-37
5-43
5-81
5-88
5-105
5-111
6-94

RMS-11 Macros 5-21
RMS-11 Macros 5-37
RfltS-11 Macros 5-43
RMS-11 Macros 5-81
RMS-11 Macros 5-88
RMS-11 Macros 5-105

Index-181

MASTER INDEX
NB$WVE mask in FNB field (Cont.)
RENAME operation
value
NB.ANS
bit in N.STAT
.NCHR directive
NDF condition test argument
NE condition test argument
Negative offset
Nested conditional assembly
directive
Nesting
macro definition
<NETNOD> symbol
/NETUIC keyword
SET command
VMR
Network facilities
RMSCNV utility
$NEW
predefined syntax element in
MML
/NEW VERSION qualifier
BRU utility
NEXT & PRINT command
EDI editor
NEXT command
EDI editor
Next sequential location
Next-record context
See also Context
$NFIL
predefined syntax element in
MML
$NFILE
predefined syntax element in
MML
NFS
exercise
example of
testing
range of blocks
volume
altering range of test blocks
displaying range of test
blocks
error retries
selecting with SELECT
selecting with VERIFY
/NL switch
NL:
pseudo device
.NLIST BEX directive
.NLIST directive
arg'uments for
.NLUNS
reserved global symbol
/NM switch
PIP utility
NMBLK$
general method of specifying
macro call
parameters
NMBLK$ macro
NMLll
No limit switch
No log switch

RMS-11 Macros 5-111
RMS-11 Macros 6-94
I/O Operations 4-15
PDP-11 MACR0-11 7-13
PDP-11 MACR0-11 6-52
PDP-11 MACR0-11 6-51
ODT 7-2
PDP-11 MACR0-11 6-52
PDP-11 MACR0-11 7-5 to 7-6
MCR Operations 4-14
MCR Operations 3-189
System Management 10-53
RMS-11 Utilities 4-1
System Management 12-44
Utilities 7-19
Utilities 2-16, 2-39
Utilities 2-16, 2-39
ODT 4-4
RMS-11 Macros 4-3

System Management 12-41
System Management 12-41
System Management 4-14
System Management 4-50
System Management 4-50
System Management 4-50
System Management 4-54
System Management 4-56
System Management 4-62
PDP-11 MACR0-11 8-6
Command Language 5-6
Program Development 2-6
PDP-11 MACR0-11 6-9 to 6-14
PDP-11 MACR0-11 6-10 to 6-12
Task Builder E-1
Task Builder 10-30
Utilities 3-28
I/O Operations 2-32
I/O Operations 2-30
I/O Operations 2-31
I/O Operations 3-15
Error Logging 4-9
Error Logging 2-3, 2-6
Error Logging 2-3

Index-182

MASTER INDEX
NO macro
MML
NO SCROLL key
VTlOO
No sharing
sharing declaration
No spool switch
No-op I/O function mask
/[NO]CV switch
RMSRST utility
/[NO]QU switch
RMSBCK utility
RMSRST utility
NOA field in SUM block
DISPLAY operation
off set
OPEN operation
summary
NOCOMMAND qualifier
DCL
MCR
.NOCROSS directive
$NOD
predefined syntax element in
MML
$NODE
predefined syntax element in
MML
Node
remote file specification
/NOER switch
RMSIFL utility
/NOINITIALIZE qualifier
BRU utility
NOJOURNAL qualifier
DCL
example
MCR
NOK field in SUM block
DISPLAY operation
off set
OPEN operation
summary
Nokeypad command
ADV
APPEND
ASC
BACK
CHGC
circLnnflex ("')
CUT
D

DEFK
EX
EXT
FILL
I

Null

PASTE
QUIT
R

REF

SEL
SHL
SHR
SN

System Management 12-35
Command Language 3-14
Introduction 1-17
RMS-11 User's Guide 2-7
Crash Dump Analyzer 2-8
Writing I/O Driver 4-12
RMS-11 Utilities 7-5, 7-10
RMS-11 Utilities 6-5 to 6-7, 6-10
RMS-11 Utilities 7-6 to 7-8, 7-12
RMS-11 Macros 5-32
RMS-11 Macros 6-145
RMS-11 Macros 5-81
RMS-11 Macros 6-148
EDT Editor 4-3
EDT Editor 4-6
PDP-11 MACR0-11 6-21 to 6-22
System Management 12-41
System Management 12-41
RMS-11 User's Guide B-2
RMS-11 Utilities 3-6
Utilities 7-19
EDT Editor 4-4
EDT Editor 3-5
EDT Editor 4-6
RMS-11 Macros 5-32
RMS-11 Macros 6-145
RMS-11 Macros 5-81
RMS-11 Macros 6-149
EDT Editor 8-5
EDT Edi tor 8-5
EDT Editor 8-5
EDT Editor 8-6
EDT Editor 8-6
EDT Editor 8-25
EDT Editor 2-43,
EDT Edi tor 2-40,
EDT Editor 8-10,
EDT Edi tor 8-10
EDT Editor 8-10
EDT Editor 8-11
EDT Editor 2-40,
EDT Editor 8-13
EDT Editor 2-43,
EDT Edi tor 8-15
EDT Editor 8-15
EDT Editor 8-16
EDT Editor 2-42,
PA-I~,.. ...
EDT g'""'
...... ..., ... 8-17

EDT Editor 8-18
EDT Editor 8-18
EDT Editor 8-19
Index-183

8-7
8-9
10-1

8-12
8-15

8-16

MASTER INDEX
Nokeypad command (Cont.)
TAB
TADJ
TC
TD
TI
TOP
UNDC
UNDL
UNDW
No keypad editing
buffer definition
command definition
command format
copying text
count definition
CTRL/Z and I
cursor movement
defining entity
deleting entity
deleting text
description
direction definition
ending a session
entity
format
how to enter
inserting character
inserting text
moving text into buffers
returning to line editing
reverse search
search ('string')
shortening a file
starting
substituting text
undeleting character
undeleting text
use of command
using
using CTRL/Z with I
/NOLIM switch
/NOLO job switch
QUE /MOD command
/NOLOG switch
/NOLOW switch
PR! command
Non-RMS-11 files
Noncontiguous range
Nonfile-structured exercising
IOX

Nonoverlaid routine
Nonprivileged task
directive restrictions
Nonprivileged user
Nonsense interrupt logging
NOOUTPUT qualifier {DCL)
/NOPRESERVE qualifier
BRU utility
Noread Only qualifier
NOREAD ONLY {DCL)
-RO (MCR)
NORECOVER qualifier
DCL
MCR
NOSAV symbolic argument

EDT Editor 8-21
EDT Edi tor 8-22
EDT Editor 8-23
EDT Editor 8-24
EDT Editor 8-24
EDT Editor 8-24
EDT Editor 8-24
EDT Editor 8-25
EDT Editor 2-41, 8-24
EDT Editor 8-4
EDT Editor 8-4
EDT Editor 2-37
EDT Editor 8-15
EDT Editor 8-4
EDT Editor 2-40
EDT Editor 2-37, 2-39, 8-2
EDT Editor 2-39
EDT Editor 8-9
EDT Editor 8-i5
EDT Editor 1-7, 2-36
EDT Editor 8-4
EDT Editor 8-10
EDT Editor 8-2 to 8-4
EDT Editor 8-4
EDT Editor 2-37
EDT Editor 2-40
EDT Editor 8-12
EDT Editor 8-7
EDT Editor 2-44
EDT Editor 2-42, 8-6
EDT Editor 8-4
EDT Editor 2-39
EDT Editor 2-36, 7-2, 8-1
EDT Editor 2-42
EDT Editor 8-24
EDT Editor 8-25
EDT Editor 1-10
EDT Editor 2-37
EDT Editor 8-13
Error Logging 2-3, 2-6
Batch and Queue 2-21
Error Logging 2-3
Batch and Queue 2-4
RMS-11 Introduction 3-4
EDT Editor 6-11
System Management 4-3
RMS-11 User's Guide 1-13, 8-2,
8-8 to 8-9
Executive 1-12 to 1-13
Introduction 5-5, Gloss-25
Error Logging 4-22
EDT Editor 4-3
Utilities 7-19
EDT Editor 4-4
EDT Editor 4-7
EDT Editor 4-4
EDT Editor 4-6
PDP-11 MACR0-11 6-42
Index-184

MASTER INDEX
/NOSO switch
RMSIFL utility
/NOSP switch
/NOSUPERSEDE qualifier
BRU utility
Notes module
exit
heading
MODULE statement
NMLll
note name
NRK67
NRM05
NRM23

NT0310
NTSll
print declaration
pr int number
PROCEDURE statement
unknown note
user written
NOTYPE qualifier
/NOVERIFY switch
FMT utility
.NOVLY
reserved global symbol
/NOWCHK switch
BAD utility
NOWIDE argument
NP command
EDI editor
NPR device driver
use of SCB field S.MPR
NRK67
NRM05
NRM23
/NS switch
SLP utility
NSG field in KEY block
DISPLAY operation
off set
OPEN operation
summary
$NSIER
.NSTBL
reserved global symbol
NT0310
NTSll
.NTYPE directive
/NU switch
FLX utility
NUL field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
$NULL
predefined syntax element in
MML
Null
root
in ODL
segment
in ODL
NULL command (Implied TYPE)
line editing

RMS-11 Utilities 3-8 to 3-10
PDP-11 MACR0-11 8-7
Utilities 7-19
Error Logging 4-33
Error Logging 4-32
Error Logging 4-32
Error Logging 4-9
Error Logging 4-32
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Error Logging 4-32
Error Logginq 4-33
Error Logging 4-32
Error Logging 4-33
Error Logging 4-31
EDT Editor 7-17
Utilities 5-8
Task Builder E-1
Utilities 6-9
PDP-11 MACR0-11 8-11 to 8-12
Utilities 2-16, 2-39
Writing I/O Driver B-1
Writing I/O Driver 4-23
Error Logging 4-9
Error Logging 4-9
Error Logging 4-9
Utilities 13-16
RMS-11 Macros 5-31
RMS-11 Macros 6-68
RMS-11 Macros 5-81
RMS-11 Macros 6-86
Error Logging 4-22
Task Builder E-1
Error Logging 4-9
Error Logging 4-9
PDP-11 MACR0-11 7-14
Utilities 4-7
RMS-11 Macros 5-19
RMS-11 Macros 5-31
RMS-11 Macros 6-67
RMS-11 Macros 5-80
RMS-11 Macros 6-87
System Management 12-45
Task Builder 3-30
Task Builder 3-30
Task Builder 3-30
EDT Editor 2-23, 7-12
Index-185

MASTER INDEX
NULL command (Implied TYPE)
(Cont.)
nokeypad editing
Null device
driver
Null key

EDT Editor 8-13
I/O Drivers 19-1
I/O Drivers 19-1
RMS-11 Introduction 3-10
RMS-11 User's Guide 6-10

See also NUL field in KEY block
See also XB$NUL mask in FLG field
/NULL subkeyword
CLI command
NULL KEY
RMSDES utility
NULL VALUE
RMSDES utility
$NUM
predefined syntax element in
MML
Number
displayed in line editing
fixed 1 ine
floating-point
line
MACR0-11 treatment
one's complement
one-word floating-point
packing decimal
radix control
resequencing of line
two's complement operator
version
file
Number of arguments
See .NARG directive
Number sign {fl:)
in cross-reference listing
<NUMBER> symbol
Numbering system
Numeric control
operator
temporary operator
Numeric conversion function
Numeric directive
Numeric symbol
d ec r emen ting
defining
incrementing
radix of
redefining
substituting
testing
Numeric to ASCII
See also ASCII number
conversion
binary byte to octal ($CBTMG)
binary date to decimal {$CBDAT)
binary to signed decimal
{$CBDSG)
binary to signed octal {$CBOSG)
binary to unsigned decimal
($CBDMG)
binary to unsigned octal
($CBOMG)
double-precision binary to
decimal ($CDDMG)
general purpose binary to ASCII
($CBTA)

MCR Operations 3-38
RMS-11 Utilities 2-39
RMS-11 Utilities 2-39
System Management 12-39
EDT Editor 6-1
EDT Editor 1-7,
PDP-11 MACR0-11
EDT Editor 6-1
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
PDP-11 MACR0-11
EDT Editor 6-3
PDP-11 MACR0-11

6-4
6-33 to 6-34
3-14
6-35 to 6-36
6-35 to 6-36
6-31
6-31 to 6-32
3-4

Command Language 4-3
Command Language 3-16
Task Builder 10-12 to 10-13
MCR Operations 4-9
Introduction 3-2
PDP-11 MACR0-11 6-33
PDP-11 MACR0-11 6-35 to 6-36
Error Logging 5-17 to 5-18
PDP-11 MACR0-11 6-33
MCR Operations 4-7, 4-14
MCR Operations 4-30
MCR Operations 4-49
MCR Operations 4-42
MCR Operations 4-15
MCR Operations 4-49
MCR Operations 4-15
MCR Operations 4-39
System Library 5-1
System Library 5-9
System Library 5-2
System Library 5-4
System Library 5-8
System Library 5-3
System Library 5-7
System Library 5-5
System Library 5-10

Index-186

MASTER INDEX
Numeric to ASCII (Cont.)
Radix-so to ASCII {$C5TA)
/NV subswi tch
PIP utility
/NV switch
PIP utility
NXT field in ALL block
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
NXT field in DAT block
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
NXT field in KEY block
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
NXT field in PRO block
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
NXT field in SUM block
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation

System Library 5-11
Utilities 3-20
Utilities 3-12
RMS-11 Macros 5-3
RMS-11 Macros 5-9
RMS-11 Macros 5-30
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 6-2
RMS-11 Macros 5-73
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-13
RMS-11 Macros 5-3
RMS-11 Macros 5-9
RMS-11 Macros 5-30
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 6-14
RMS-11 Macros 5-73
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-19
RMS-11 Macros 5-3
RMS-11 Macros 5-9
RMS-11 Macros 5-30
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 6-67
RMS-11 Macros 5-73
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-88
RMS-11 Macros 5-3
RMS-11 Macros 5-9
RMS-11 Macros 5-30
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 6-108
RMS-11 Macros 5-73
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-111
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
RMS-11 Macros
Index-187

5-3
5-9
5-30
5-35

MASTER INDEX
NXT field in SUM block (Cont.)
ERASE operation
EXTEND operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
NXT field in XAB
chaining XABs to FAB
<NXTSYM> symbol
$NXTVOL macro
RSTS/E
NXTVOL operation
$NXTVOL macro
record stream

RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 6-145
RMS-11 Macros 5-73
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-150
RMS-11 Macros 2-12
MCR Operations 4-14
RMS-11 Macros 5-70
RMS-11 Macros D-4
RMS-11 Introduction 4-4
RMS-11 Macros 5-70
RMS-11 Macros 4-9

0
O command
ZAP utility
O error
summary

""o operator
0$-family symbol
declaring
ALL block
DAT block
FAB field offset
KEY block
NAM block field offset
PRO block
RAB
SUM block
XAB
value
ALL block
DAT block
FAB
KEY block
NAM block
PRO block
RAB
SUM block
/OA switch
RMSRST utility
$$0BF1
reserved PSECT name
$$0BF2
reserved PSECT name
.OBJ file type
Object
library
adding modules
creating a user
default search of system
DIGITAL-supplied
dual use
listing information
OTS
using to resolve undefined
glob al symbols
module
concatenated

ODT 2-10, 7-1
Utilities 15-17
PDP-11 MACR0-11 6-39, 6-53, 7-3,
7-12, 7-14, 7-21
PDP-11 MACR0-11 D-4
PDP-11 MACR0-11 3-5, 6-32
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-1
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-2
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-2
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-4
RMS-11 Macros 6-2
RMS-11 Macros 6-14
RMS-11 Macros 6-22 to 6-24
RMS-11 Macros 6-67 to 6-68
RMS-11 Macros 6-94
RMS-11 Macros 6-108
RMS-11 Macros 6-115
RMS-11 Macros 6-145
RMS-11 Utilities 7-9 to 7-10
Task Builder E-3
Task Builder E-3
Program Development 3-4, 7-5
Program Development 6-9 to 6-10
Program Development 6-4 to 6-6
Program Development 1-11, 4-2
Program Development 1-10 to 1-11
Program Development 6-8 to 6-9
Program Development 6-11 to 6-12
Program Development 7-1 to 7-2
Program Development 6-8 to 6-9
Program Development 4-3 to 4-4
Index-188

MASTER INDEX
Object
module (Cont.)
FORTRAN IV

Program Development 7-5 to 7-6
Program Deveiopment 4-i
Program Development 1-4, 3-4 to
3-6

input to TKB

MACR0-11
Object code
assembling
compiling
patching
Object file

RMS-11 user's Guide 1-13, 8-1
RMS-11 User's Guide 1-13, 8-1
Task Builder 11-5
Introduction 4-3, 4-5 to 4-9,
4-11 to 4-12, Gloss-22
Introduction 4-3, 4-5 to 4-9,
4-11 to 4-12, Gloss-22
Task Builder 10=7
Task Builder A-1

Object module
concatenating
content of
data base
inserting
into Executive object
library
default name
format
linking
name
name assignment
overriding definition in
patching
PAT utility
relocatable
selective global symbol
using /SS to include
storing in library
LBR utility
Object module library

System Generation (llS) 4-5
PDP-11 MACR0-11 6-15
Task Builder A-3
Task Builder 2-1
PDP-11 MACR0-11 1-2
PDP-11 MACR0-11 6-15
Task Builder 11-17
Release Notes 1-47
Utilities 14-1
Task Builder 2-2
Task Builder 10-47 to 10-49
Utilities 10-19
Command Language 6-41
RMS-11 User's Guide 8-1

Object Module Patch Utility
See PAT utility
/OBJECT qualifier
Object Time System
See also OTS
usage to extend record buffer
OBJECT BINARY argument
OCB
OCOP macro
MML
/OCT switch
DMP utility
Octal conversion
octal to binary ($COTB)
octal to binary double-word
{ .OD2CT)
Octal number
Octal operator
<OCTAL> symbol
.OD2CT (Octal to binary
double-word)
.ODD directive
$ODEV
predefined syntax element in
MML
$0DEVE
predefined syntax element in
MML
ODL
autoload indicator

PDP-11 MACR0-11 8-10
Task Builder 11-16
PDP-11 MACR0-11 8-11
Executive 5-31, 5-172
System Management 12-29
Utilities 11-7
System Library 4-5
System Library 4-2
Introduction 3-2, Gloss-22
ODT 2-7, 4-2 to 4-3
MCR Operations 4-9
System Library 4-2
PDP-11 MACR0-11 6-37
System Management 12-42
System Management 12-42
RMS-11 User's Guide 8-3
Task Builder 4-2

Index-189

MASTER INDEX
ODL (Cont.)
directive
.END
example use of • NAME
.FCTR
introduction
.NAME
.NAME attributes
.PSECT
.ROOT
efficiently placing in
autoload indicator
enabling operator
memory-resident overlay
file
declaring a
multiple-tree
defining structure
example
structure
operator
, (comma)
! (exclamation point)
- (hyphen)
introduction
summary
using indirect file with
ODL file
creating
start of procedure
with allocation diagram
DAPRLX
.FCTR statement
creating from allocation
diagram
prototype
RMSRLX
.ROOT statement
creating from allocation
diagram
standard
DAPllX
RMSllS
RMSllX
RMS12X
virtual address space
in allocation diagram
ODL statement
co-tree
from allocation diagram
ODT
at sign (@)
B command
backslash ()
breakpoint register
changing location contents
correcting input
dollar sign ($)
error conditions in task
examining locations
forming address
G command
including in a task
LINE FEED key

Task Builder 3-22 to 3-23
Task Builder 3-22
Task Builder 3-27
Task Builder 3-24
Task Builder 3-22
Task Builder 3-26
Task Builder 3-27
Task Builder 3-28
Task Builder 3-22
Task Builder 4-6
Task Builder 10-34
Task Builder 10-28
Task Builder 3-29
Task Builder 3-30 to 3-31
Task Builder 3-29
Task Builder 3-23
Task Builder 3-23, 3-25 to 3-26
Task Builder 3-23
Task Builder 3-23
Task Builder 3-48 to 3-51
Task Builder 3-29
Task Builder 3-35
Task Builder 3-34 to 3-35
RMS-11 User's Guide 8-7
Task Builder 3-37 to 3-38
RMS-11 User's Guide 8-3
RMS-11 User's Guide 8-7
Task Builder 3-36
RMS-11 User's Guide 8-3, 8-5
RMS-11 User's Guide 8-6
RMS-11 User's Guide 8-5
RMS-11 User's Guide 8-5
RMS-11 User's Guide 8-6
Task Builder 3-35
Task Builder 3-38 to 3-39
Program Development 1-6 to 1-7
Program Development 5-8
Program Development 5-6
Program Development 5-5
Program Development 5-6
Program Development 5-7
Program Development 5-3
Program Development 5-6 to 5-8
Program Development 5-8
Program Development 5-4 to 5-5
Program Development 5-4
Program Development 5-6, 5-8
Program Development 5-1 to 5-2
Program Development 5-5, 5-7 to
5-8

map use
ODT. OBJ file

Program Development 5-2
Program Development 5-1
Index-190

MASTER INDEX
ODT (Cont.)
overview
P command
question mark {?)
R command
relocation register
RETURN key
setting breakpoints
setting up a task with
slash (/)
source listing use
SST within
terminating task execution
underline ( )
X command ODT on-line debugger
ZAP utility
ODT Reference Manual
note to
ODT vector
ODTID module
.. ODTLl
reserved global symbol
.ODTL2
reserved global symbol
ODTV option
$OFF macro
Off set
branch
calculation
negative
PC-relative
Offset mode
Offspring Control Block
See OCB
Offspring task
status values
OFNB$X macro call
format
.OLB file type
See also LBR
On-line
definition
formatting ( FMT)
On-Line Debugging Tool
See ODT
On-Line Task Loader
See OTL
One's complement operator
One-word floating-point number
.ONERR directive
example
format
$0NUM
predefined syntax element in
MML
Op code
See Operation code
OP command
EDI editor
OPEN command
Basic MCR
command line format
control character
error message
example
exiting

ODT 1-1
Program Development 5-7
Program Development 5-3
Program Development 5-3
Program Development 5-2 to 5-4
Program Development 5-8
Program Development 5-6
Program Development 1-7
Program Development 5-4
Program Development 5-4
Program Development 5-8
Program Development 5-8
Program Development 5-2
Program Development 5-8
Utilities 15-1
Release Notes 1-54
Task Builder 11-24
ODT 1-3
Task Builder E-1
Task Builder E-1
Task Builder 11-24
RMS-11 Macros 2-11
ODT 2-3, 7-1
ODT 7-2
ODT 2-10, 7-1
ODT 7-2
ODT 7-2
Crash Dump Analyzer 3-1

Executive 4-3
I/O Operations 3-14
Program Development 6-4
System Generation (llM) 1-6
System Generation (llM) 4-27

PDP-11 MACR0-11 3-5, 6-35 to 6-36
,PDP-ll MACRO-ll 6-3 5 to 6-36
MCR Operations 4-43
MCR Operations 4-44
MCR Operations 4-43
System Management 12-40

Utilities 2-39
MCR Operations 3-135
System Generation (llS) 2-3
MCR Operations 3-135
MCR Operations 3-135
MCR Operations 3-138
MCR Operations 3-138
MCR Operations 3-136
Index-191

MASTER INDEX
OPEN command (Cont.)
keyword
/ORV
/KNL
/PAR
/TASK
line terminator
.OPEN directive
example
format
OPEN LINE function
$OPEN macro
RSTS/E
OPEN operation
BOB requirement
I/O buffer requirement
IFAB requirement
$OPEN macro
remote access
wildcard loop
OPEN SECONDARY command
EDI editor
OPEN$ macro call
format
OPEN$x
restrictions
suffixes for
OPEN$x macro call
file access privileges
format
.OPENA directive
example
format
Opening
a file
a new file
absolute location
an existing file
byte location
location
definition
PC-relative location
preceding location
relative branch location
sequential location
word location
.OPENR directive
example
format
OPENREGISTER command
Operand field
separator
Operating mode
Indirect
disabling
enabling
initial setting
list
testing
Operating system
allocating system resources
block locking
command line

MCR Operations 3-136
MCR Operations 3-137
MCR Operations 3-137
MCR Operations 3-137
MCR Operations 3-136
MCR Operations 4-44
MCR Operations 4-44
MCR Operations 4-44
EDT Edi tor 5-11
RMS-11 Macros 5-72
RMS-11 Macros D-4
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Macros 3-7
RMS-11 Macros 2-8
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 Macros 5-72
RMS-11 User's Guide B-2 to B-3
RMS-11 Macros 3-10 to 3-11
Utilities 2-39
I/O Operations 3-17
I/O Operations 3-3
I/O Operations 3-2
I/O Operations 3-3
I/O Operations 3-5
MCR Operations 4-44
MCR Operations 4-45
MCR Operations 4-45
I/O Operations 3-2
I/O Operations 3-8
ODT 2-5, 4-4
I/O Operations 3-4, 3-8
ODT 4-2 to 4-6
ODT 4-1
2-5i 4-5
ODT 2-5, 4-4
ODT 2-6, 4-5
ODT 2-5, 4-4
ODT 4-2 to 4-6
MCR Operations 4-45
MCR Operations 4-45
MCR Operations 4-45
MCR Operations 3-135
PDP-11 MACR0-11 2-1, 2-4
PDP-11 MACR0-11 3-2
ODT

MCR Operations 4-31
MCR Operations 4-32
MCR Operations 4-32
MCR Operations 4-32
MCR Operations 4-40
Introduction 1-1, 4-1, 5-1, 5-4,
Gloss-23
RMS-11 User's Guide 1-13
RMS-11 User's Guide 8-13
RMS-11 User's Guide 3-6
EDT Editor 2-2
Index-192

MASTER INDEX
Operating system (Cont.)
compatibility
defaults
DEQ
FA Ls
protection codes
and shared access
remote access
RSTS/E
RSX-1 lM/M-PLUS
VAX/VMS
return to
Operating system failure
Operation
asynchronous

block
CLOSE
CONNECT
indexed files
relative files
sequential files
CREATE
and shared access
file versions
remote access
DELETE
and key position
and shared access
deferred write
duplicate keys
indexed files
relative files
directory
indexed files
relative files
sequential files
DISCONNECT
indexed files
relative files
sequential files
DISPLAY
ENTEND
ENTER
file versions
remote access
ERASE
remote access
wildcard operations
EXTEND
and shared access
file

indexed files
optimizations

RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 3-4
User's Guide 2-2
User's Guide 3-5
User's Guide B-3

RMS-11 User's Guide 2-5
RMS-11 User's Guide B-3
RMS-11 User's Guide B-3
RMS-11 User's Guide B-1, B-3
ODT 2-11
Error Logging 1-1
RMS-11 Introduction 4-1
RMS-11 Macros 1-2
RMS-11 Introduction 4-4
RMS-11 User's Guide 2-17, 3-14,
4-14, 7-8, 8-2, 8-4, 8-7 to
8-8
RMS-11 Introduction 4-7
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 7-2
RMS-11 User's Guide 4-7
RMS-11 User's Guide 3-7
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 User's Guide 2-6
RMS-11 User's Guide A-3
RMS-11 User's Guide B-2 to B-3
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 6-7
RMS-11 User's Guide 2-6
RMS-11 User's Guide 7-9
RMS-11 User's Guide 6-9
RMS-11 User's Guide 5-15, 7-3
RMS-11 User's Guide 4-7
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 User's Guide 7-10
RMS-11 User's Guide 4-15
RMS-11 User's Guide 3-15
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 7-3
RMS-11 User's Guide 4-8
RMS-11 User's Guide 3-7
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 Introduction 4-2
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 User's Guide A-3
RMS-11 User's Guide B-1
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 User's Guide B-2
RMS-11 User's Guide A-4
RMS-11 User's Guide 1-18
RMS-11 User's Guide 2-6
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 User's Guide 7-10
RMS-11 User's Guide 8-10
Index-193

MASTER INDEX
Operation
file (Cont.}
relative files
sequential files
FIND
access modes
and bucket locking
and shared access
and stream records
deferred write
indexed files
key access
relative files
RFA access
sequential access
sequential files
FLUSH
indexed files
relative files
sequential files
FREE
and shared access
from high-level languages
GET
access modes
and bucket locking
and OD Ls
and shared access
and stream records
deferred write
indexed files
key access
locate mode
move mode
relative files
RFA access
sequential access
sequential files
NXTVOL
OPEN
remote access
optimizations
PARSE
remote access
PUT
access modes
and key position
and OD Ls
and shared access
and stream records
deferred write
duplicate keys
indexed files
initial allocation
key access

RMS-11 User's Guide 4-15
RMS-11 User's Guide 3-15
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Introduction 4-6
RMS-11 User's Guide 2-8
RMS-11 User's Guide 2-6, 2-10
RMS-11 User's Guide 2-16
RMS-11 User's Guide 7-9
RMS-11 User's Guide 5-13, 5-17,
7-3
RMS-11 User's Guide 1-16
RMS-11 User's Guide 4-8
RMS-11 User's Guide 1-16
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-7
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 7-5
RMS-11 User's Guide 4-10
RMS-11 User's Guide 3-9
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 2-10
RMS-11 Introduction 4-7
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Introduction 4-6
RMS-11 User's Guide 2-8
RMS-11 User's Guide 8-5
RMS-11 User's Guide 2-6, 2-10
RMS-11 User's Guide 2-16 to 2-17
RMS-11 User's Guide 7-9
RMS-11 User's Guide 5-13, 5-17,
7-5
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-14, 4-13,
7-8
RMS-11 User's Guide 3-13, 4-12,
7-7
RMS-11 User's Guide 4-10
RMS-11 User's Guide 1-16
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-9
RMS-11 Introduction 4-4
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-18
RMS-11 User's Guide B-2 to B-3
RMS-11 User's Guide 8-10
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 User's Guide B-1
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Introduction 4-6
RMS-11 User's Guide 6-7
RMS-11 User's Guide 8-5
RMS-11 User's Guide 2-6
RMS-11 User's Guide 2-17
RMS-11 User's Guide 7-9
RMS-11 User's Guide 6-9
RMS-11 User's Guide 5-10, 5-17,
7-5, 7-9
RMS-11 User's Guide 4-4
RMS-11 User's Guide 1-16
Index-194

MASTER INDEX
Operation
PUT (Cont.)
locate mode
mass insertion
move mode
relative files
sequential access
sequential files
READ
access modes
record
and I/O costs
and indexed files
indexed files
opt imi za ti o ns
relative files
sequential files
REMOVE
remote access
wildcard operations
RENAME
file versions
remote access
wildcard operations
REWIND
indexed files
relative files
sequential files
routine
calling
return
SEARCH
remote access
SPACE
access modes
stream
i nd ex ed f il es
relative files
sequential files
synchronous
TRUNCATE
and shared access
sequential files
UPDATE
and ODLs
and record size
and shared access
and stream records
changeable keys
deferred write
duplicate keys
indexed files
move mode
relative files
sequential files
using

RMS-11 User's Guide 3-14
RMS-11 User's Guide 7-9
RMS-11 User's Guide 3-13, 4-12,
7-7
RMS-11 User's Guide 4-11
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-10
RMS-11 Introduction 4-7
RMS-11 Introduction 4-7
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-10, 1-15
RMS-11 User's Guide 5-17
RMS-11 User's Guide 5-9, 5-16
RMS-11 User;s Guide 7-2
RMS-11 User's Guide 8-10
RMS-11 user's Guide 4-7
RMS-11 User's Guide 3-7
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 User's Guide B-1
RMS-11 User's Guide A-4
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 User's Guide A-3
RMS-11 User's Guide B-1
RMS-11 User's Guide A-4
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 7-6
RMS-11 User's Guide 4-12
RMS-11 User's Guide 3-11
RMS-11 Macros 2-13
RMS-11 Macros 2-14
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 User's Guide B-1
RMS-11 Introduction 4-7
RMS-11 Introduction 4-7
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 7-2
RMS-11 User's Guide 4-7
RMS-11 User's Guide 3-7
RMS-11 Introduction 4-4
RMS-11 User's Guide 8-2
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 2-6
RMS-11 User's Guide 3-12
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 User's Guide 8-5
RMS-11 User's Guide 2-16
RMS-11 User's Guide 2-6, 2-10
RMS-11 User's Guide 2-17
RMS-11 User's Guide 6-10
RMS-11 User's Guide 7-9
RMS-11 User's Guide 6-9
RMS-11 User's Guide 5-14, 7-6
RMS-11 User's Guide 3-13 to 3-14,
4-12 to 4-13, 7-7 to 7-8
RMS-11 User's Guide 4-12
RMS-11 User's Guide 3-12
RMS-11 Macros 2-9
Index-195

MASTER INDEX
Operation (Cont.)
WAIT
WRITE
access modes
and shared access
Operation code
comercial instruction
floating-po int
PDP-11
Operation macro
Operator
See also SLP utility
arithmetic
ASCII (/)
backslash ()
backslash (\)
binary
addition
division
evaluation of multiple
logical AND
logical inclusive OR
multiplication
precedence with unary
subtract i on
byte mode
ASCII
octal
comma ( ,)
equal sign {=)
field
logical
minus sign (-)
ODL
, (comma)
! (exclamation point)
- (hyphen)
introduction
plus sign (+}
Rad ix-50 (%)
slash {/)
unary
binary radix control
decimal radix control
evaluation of multiple
macro call use
minus
numeric control
octal radix control
one's complement
one-word floating-point
plus
precedence over binary
radix control
Radix-so control
two's complement
universal
word mode
ASCII
octal
OPT macro
MML
Optimization
allocating system resources
application design

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Introduction 4-4
User's Guide 1-15
Introduction 4-7
Introduction 4-7
User's Guide 2-6

PDP-11 MACR0-11 C-3 to C-4
PDP-11 MACR0-11 C-4 to C-5
PDP-11 MACR0-11 C-1 to C-3
RMS-11 Macros 1-2, 2-9
ODT 2-3 to 2-4, 2-7, 4-2
Introduction Gloss-23
MCR Operations 4-14
ODT 2-7
ODT 4-3
ODT 2-7, 4-2 to 4-3
PDP-11 MACR0-11 3-5 to 3-6
PDP-11 MACR0-11 3-5
PDP-11 MACR0-11 3=5
PDP-11 MACR0-11 3-6
PDP-11 MACR0-11 3-5
PDP-11 MACR0-11 3-5
PDP-11 MACR0-11 3-5
PDP-11 MACR0-11 3-16
PDP-11 MACR0-11 3-5
ODT 2-7
ODT 2-7, 4-2 to 4-3
ODT 2-4
ODT 2-8, 7-2
PDP-11 MACR0-11 2-1, 2-3 to 2-4
MCR Operations 4-14
ODT 2-3 to 2-4
Task Builder 3-23
Task Builder 3-23
Task Builder 3-23, 3-25 to 3-26
Task Builder 3-23
Task Builder 3-23
ODT 2-3 to 2-4
ODT 2-7
ODT 4-2 to 4-3
PDP-11 MACR0-11 3-4
PDP-11 MACR0-11 3-5, 6-32
PDP-11 MACR0-11 3-5, 6-32
PDP-11 MACR0-11 3-4
PDP-11 MACR0-11 7-5
PDP-11 MACR0-11 3-4
PDP-11 MACR0-11 6-33, 6-35
PDP-11 MACR0-11 3-5, 6-32
PDP-11 MACR0-11 3-5, 6-35 to 6-36
PDP-11 MACR0-11 3-5, 6-35 to 6-36
PDP-11 MACR0-11 3-4
PDP-11 MACR0-11 3-16
PDP-11 MACR0-11 6-31 to 6-33
PDP-11 MACR0-11 3-5, 6-30
PDP-11 MACR0-11 3-4
PDP-11 MACR0-11 3-5
ODT 2-7
ODT 2-7, 4-2 to 4-3
System Management 12-35 to 12-36
RMS-11 User's Guide 8-13
RMS-11 User's Guide 2-11
Index-196

MASTER INDEX
Optimization {Cont.)
DELETE operation
disk usage
operations
overlays
program development
PUT operation
task building
virtual-to-logical block
mapping
window turning
Option
category of
general form of
input
in command line
linking to region
separation of argument list
summary
Task Builder
ABORT
AB SPAT

ACTFIL
ASG
CLSTR
COMMON or LIBR
DSPPAT
EXTSCT
EXTTSK
FMTBUF
GBLDEF
GB LINC
GBLPAT
GBLREF
GBLXCL
MAXBUF
ODTV
PAR
PRI
RESCOM or RESLIB
STACK
TASK
TSKV
UIC
UNITS
VSECT
WNDWS
Option summary
OPTR macro
MML
ORG field in FAB
CREATE operation
off set
OPEN operation
summary
ORG$ macro
ORGANIZATION
RMSDES utility
Organization
See File organization
See ORG field in FAB
Original line number

RMS-11 User's Guide 6-7
RMS-11 User's Guide 8-13
RMS-11 User's Guide 8-10
RMS-11 User's Guide 8-1
RMS-11 User's Guide 8-9
RMS-11 User's Guide 6-7
RMS-11 User's Guide 8-10
RMS-11 User's Guide 8-11
RMS-11 User's Guide 8-12
Task Builder 11-1
Task Builder 1-4
Task Builder 1-3
Task Builder 5-14
Task Builder 1-4 to 1-5
Task Builder 11-2
Task Builder 1-4, 11-1
Task Builder 11-4
Task Builder 11-5
Task Builder 11-6
Task Builder 11-7
Task Builder 11-8 to 11-9
Task Builder 11-11 to 11-12
Task Builder 11-13
Task Builder 11-14
Task Builder 11-15
Task Builder 11-16
Task Builder 11-17
Task Builder 11-18
Task Builder 11-19
Task Builder 11-20
Task Builder 11-21
Task Builder 11-23
Task Builder 11-24
Task Builder 11-25 to 11-26
Task Builder 11-27
Task Builder 11-28 to 11-29
Task Builder 11-32
Task Builder 11-34
Task Builder 11-35
Task Builder 11-36
Task Builder 11-37
Task Builder 11-38
Task Builder 11-39
Task Builder 11-3
System Management 12-35 to 12-36
RMS-11 Macros 5-11
RMS-11 Macros 6-23
RMS-11 Macros 5-78
RMS-11 Macros 6-58
RMS-11 Macros 2-2
RMS-11 Utilities 2-31

EDT Edi tor 6-8

ORIGINAL number

range specification
$0SEP
predefined syntax element in
MML

EDT Editor 6-8
System Management 12-44
Index-197

MASTER INDEX
System Generation (llS) 1-1, 2-1,
2-6
Systea Generation (llS) 4-7
System Generation (llS) 2-7

OTL
building
command line
device
supported
error message
/INC switch
initiating
loading
common block
method
task
operation
partition
system-controlled
programming hint
size
terminating
transferring task
OTS
library
usage to extend record buffer
$0TSV
low-memory context
reserved global symbol
OU ON/OFF command
EDI editor
$OUIC
predefined syntax element in
MML
$OU ICE
predefined syntax element in
MML
/OUT keyword
HELP command
Out file
RMSBCK utility
RMSCNV utility
RMSDSP utility
RMS IFL utility
RMSRST utility
Output
displayed
resuming
suppressing
suspending
displaying
Output file
omitting specific
Output file switch
RMSBCK utility
RMSIFL utility
RMSRST utility
Output listing limit switch
OUTPUT ON/OFF command
EDI editor
OUTPUT qualifier (DCL)
/OUTVOLUME qualifier
BRU utility
OVCTC module
OVCTL module
OVCTR module

OVDAT module

System Generation
System Generation
System Generation
System Generation

(llS)
(llS)
(llS)
(llS)

2-6
2-10
2-8
2-7

System Generation
System Generation
2-10
System Generation
System Generation

(llS) 2-10
(llS) 2-9 to

System Generation
Syste• Generation
System Generation
Syste• Generation
System Generation

(llS)
(llS)
(llS)
(llS)
(llS)

(llS) 2-9
(llS) 2-8
2-6
2-9
1-3
2-7
2-7

Program Development 7-1 to 7-2
Task Builder 11-16
Task Builder B-10
Task Builder E-2
Utilities 2-40
System Management 12-42
System Management 12-42
MCR Operations 3-66
RMS-11 Utilities 6-3
RMS-11 Utilities 4-4
RMS-11 Utilities 5-3
RMS-11 Utilities 3-3
RMS-11 Utilities 7-3
MCR Operations 2-16 to 2-17
MCR Operations 2-16
MCR Operations 2-17
MCR Operations 3-182
Introduction 4-6, 4-10, Gloss-23
Task Builder 1-3
RMS-11 Utilities 6-6
RMS-11 Utilities 3-5
RMS-11 Utilities 7-7
Crash Dump Analyzer 2-7
Utilities 2-40
EDT Editor 4-3
Utilities 7-20
Task Builder 5-52
Task Builder 5-52
Task Builder 5-52
Task Builder 5-53

Index-198

MASTER INDEX
$$0VDT
PSECT
reserved PSECT name

Task Builder 5-53
Task Builder·E-3

.t:, -•-• ,. . - ,. .

n
•• - VY 1::.1. .i...l.VW

u~n

l"!...,n

!UV'-i<;;

Overlapped seek
Overlay
allocation diagram
creating ODL file with
and disk usage
autoload vector in
building an
building memory-resident
for reg ion
capability of an
choosing a memory-resident
co-tree
data base
I- and D-space task
data structure
1 inked into root
defining a multiple-tree
description
effect on performance
disk-resident

MCR

conserving physical memory
defined
physical memory usage
region
virtual address space
of program
in high-level language
operator
enabling recognition of
suppression of a
memory-_ resident
path loading in an
physical memory
program section

A-~~
-s-..1..1

Task Builder 3-34 to 3-39
RMS-11 User's Guide 8-14
Task Builder 3-20
Task Builder 3-40 to 3-47
Task Builder 5-9
Task Builder 3-1
Task Builder 3-14
Task Builder 3-33 to 3-34
Task Builder B-15
Task Builder B-16
Task Builder 3-19
Task Builder 3-20
Task Builder 3-30 to 3-31

defined
effect of
on physical memory
on virtual address space
effect of virtual address space
on disk-resident
effect on memory
of a disk-resident
of disk-resident
effect on physical memory
of memory-resident
effect on virtual address space
of a memory-resident
error handling
example of building a
loading
asynchronously
disk-resident
mechanism
memory-resident
methods
synchronously
memory-resident

n~~~~~~~~~
VJ:'l::.l.Q'-.&.V.U;;;>

I/O Drivers 5-7
Task Builder 2-10
RMS-11 User's Guide 8-2

Task Builder F-4
Task Builder 3-1 to 3-2
RMS-11 User's Guide 1-13, 8-3,
8-8 to 8-9
Task Builder 4-1
Task Builder 3-5
Task Builder 3-5
Task Builder 3-1 to 3-4
Task Builder 3-2
Task Builder 3-1, 3-3 to 3-4
Task Builder 3-6
Task Builder 3-6
Task Builder 4-12
Task Builder 3-40 to 3-47
Task Builder 4-10
Task Builder 4-1
Task Builder 3-16
Task Builder 4-1
Task Builder 4-1
Task Builder 4-8 to 4-9
MCR Operations 1-5
Task Builder 3-1, 3-6
RMS-11 User's Guide 1-13, 8-3,
8-6
Task Builder 3-14
Task Builder 4-1
Task Builder 3-6
Task Builder 5-9
Task Builder 3-14
Task Builder 3-39 to 3-40
Task Builder 10-34
Task Bu lder 10-34
Task Bu lder 4-4
Task Bu lder 3-32 to 3-34

Index-199

MASTER INDEX
Overlay
program section (Cont.)
specifying
region
autoload vector
building
building option
descriptor in
example of building
global symbols in .STB file
resolving symbol
restrictions
.STB file
vectors in I- and D-space
task
root segment structure
run-time
comparison of sizes in
routine
module sizes
routine
size of routine
support requirements
use of routine
segment
alignment
arrangement
descriptor in
processing order
symbol processing
structure
considerations in creating
most effective
multiple-tree
multiply defined global
symbol
specifying library search in
a
task
global cross-reference of
segment calls
virtual address space
tree
calling segments in an
virtual
address space
address space and memory
window
block
descriptor in
written in high-level language
OVERLAY command
EDI editor
Overlay Description Language
introduction
See also ODL
Overlay Description Operator
See ODL
Overlay structure
global symbol
ambiguously defined
Overlay tree diagram
virtual address space
Override block size
ANSI magtape
parameter to FDBF$A

Task Builder 3-19
Task Builder 5-11
Task Builder 5-9
Task Builder 5-10 to 5-11
Task Builder 3-20
Task Builder 5-10
Task Builder 5-11
Task Builder 5-10 to 5-11
Task Builder 5-12
Task Builder 5-11
Task Builder 5-11
Task Builder 3-21
Task Builder 3-19
Task Builder 4-16
Task Builder 5-52 to 5-53
Task Builder 3-19, 4-16
Task Builder 4-16
Task Builder 5-12, 5-51 to 5-53
Task Builder 4-14 to 4-15
Task Builder 10-8
Task Builder 3-15
Task Builder 3-20
Task Builder 3-17
Task Builder 3-17
Task Builder 3-1
Task Builder 3-2
Task Builder 3-18
Task Builder 3-16
Task Builder 10-23
Task Builder 3-7, 3-9
Task Builder 4-12 to 4-14
Task Builder 3-10
Task Builder 3-10
Task Builder 3-15
Task Builder 4-6
Task Builder 3-32 to 3-34
Task Builder 3-11 to 3-14
Task Builder 3-48
Task Builder 3-20
Task Builder 3-39 to 3-40
Utilities 2-40
Task Builder 3-15

Task Builder 3-16
Task Builder 3-23

IiO Operations 2-18
I/O Operations 2-17

Index-200

MASTER INDEX
/OVERRIDE switch
BAD utility
Overriding default buffer size
Overriding FCS defauits for
mag tape
OVIDC module
OVIDL module
OVIDR module
/OVR keyword
HOME command
MOUNT command
/OVR switch
FMT utility
OVR symbolic argument
/OVRACC keyword
MOUNT command
/OVREXP keyword
MOUNT command
/OVRFSID keyword
MOUNT command
$$0VRS
reserved PSECT name
OWNER
RMSDES utility
OWNER command
RMD
Owner group
/OWNER keyword
HOME command
IN! command
Owner, file
See PRG field in PRO block
/OWNER UIC qualifier
SHOW-QUEUE command

Utilities 6-6
I/O Operations 1-8
I/O Operations 5-7
Task Builder 5-52
Task Builder 5-52
Task Builder 5-52
MCR Operations 3-73
MCR Operations 3-122
Utilities 5-9
PDP-11 MACR0-11 6-42
MCR Operations 3-122
MCR Operations 3-122
MCR Operations 3-122
Task Builder E-3
RMS-11 Utilities 2-34
System Management 6-9
MCR Operations 2-3
MCR Operations 3-73
MCR Operations 3-83

Batch and Queue 2-16

p
P command
ODT
P error
summary
/P switch
P$-family macro
declaring
P$BDB macro
argument computation
format
P$BUF macro
argument computation
format
P$FAB macro
argument computation
format
P$IDX macro
argument computation
format
P$RAB macro
argument computation
format
P$RABX macro
argument computation
format
/PA job switch
QUE /MOD command
/PA switch
PR! command

ODT 2-10, 3-2 to 3-3
Program Development 5-7
PDP-11 MACR0-11 3-12, 3-14, 6-20,
6-38, 7-16
PDP-11 MACR0-11 D-4
Error Logging 3-5, 3-8
RMS-11 Macros C-2
RMS-11 Macros 2-8
RMS-11 Macros 2-4
RMS-11 Macros 2-7
RMS-11 Macros 2-4
RMS-11 Macros 2-5
RMS-11 Macros 2-4
RMS-11 Macros 2-5
RMS-11 Macros 2-4
RMS-11 Macros 2-5
RMS-11 Macros 2-4
RMS-11 Macros 2-5 to 2-6
RMS-11 Macros 2-4
Batch and Queue 2-20
Batch and Queue 2-4
Index-201

MASTER INDEX
Packed decimal key
RMS-11 User's Guide 6-6
See also XB$PAC mask in DTP field
PDP-11 MACR0-11 6-31
.PACKED directive
Packet information function
Error Logging 5-22
Error Logging 3-1
Packet number
Packet number switch
Error Logging 3-5, 3-8
Packet selection switches
Error Logging 3-8
PACKET statement
Error Logging 5-28
PDP-11 MACR0-11 6-31
Packing decimal number
Padding character
RMSCNV utility
RMS-11 Utilities 4-12
RMSIFL utility
RMS-11 Utilities 3-6
Page
display
RMD
System Management 6-1
Page Address Register
See PAR
PAGe command
EDI editor
Utilities 2-41
Page Description Register
See PDR
.PAGE directive
PDP-11 MACR0-11 6-17 to 6-18
Program Development 2-6
Page ejection
PDP-11 MACR0-11 6-17
PAGE FIND command
EDI editor
Utilities 2-41
PAGE function
EDT Editor 5-20
Page header
PDP-11 MACR0-11 6-4
PAGE LOCATE command
EDI editor
Utilities 2-41
/PAGE COUNT job qualifier
SET-QUEUE command
Batch and Queue 2-20
/PAGE COUNT qualifier
PRINT command
Batch and Queue 2-4
RMS-11 User's Guide 8-10
Paging
Paging, memory
See Virtual memory management
Writing I/O Driver 3-19
Panic Dump routine
sample output
Writing I/O Driver 3-20
Paper tape
error conditions
I/O Drivers 17-4
punch
I/O Drivers 17-1
reader
I/O Drivers 17-1
ready recovery
I/O Drivers 17-4
saving system on
System Management 10-40 to 10-41
standard QIO
I/O Drivers 17-2
status return
I/O Drivers 17-3 to 17-4
system image
booting
System Generation (llS) 2-17
saving
System Generation (llS) 2-17
/PAR
Crash Dump Analyzer 2-2
PAR
Task Builder 2-16
option
Task Builder 11-25
PAR command
MCR Operations 3-140
command line format
MCR Operations 3-141
example
MCR Operations 3-141
VMR
System Management 10-30
command line format
System Management 10-30
example
System Management 10-30
/PAR keyword
INSTALL command
MCR Operations 3-95
VMR
System Management 10-22
LOAD command
MCR Operations 3-105
VMR
System Management 10-27
OPEN command
MCR Operations 3-137
RUN command
MCR Operations 3-153
Index-202

MASTER INDEX
Task Builder 11-26
Task Builder 5-2

PAR option
building reg ion
Parallel Communications Link
See PCL
Parallel interface
DAll-B
Parameter
DCL

I/O Drivers 12-2
Command Language 1-8

!OX

command category
default overriding with
FILESll
default overriding with
SELECT
default shown with
PARAMETERLIST
device-dependent exercise
exercising Files-11 volumes
exercising magtape
exercising NFS volume
list of general exercise
PARAMETERLIST command
!OX

displaying buffer space
displaying defaults
Parent connection
creating
transferring
Parent/offspring tasking
Parentheses
use of
in ODL
/PARM keyword
MOUNT command
PARSlM
PARS2M
PARS 3M
.PARSE
Parse
.PARSE directive
example
format
$PARSE macro
example
PARSE operation
BOB requirement
I/O buffer requirement
IFAB requirement
$PARSE macro
remote access
wildcard initialization
PARS EM
Parser program
generating
Parser table
DCL
Partition

base address

System Management 4-3
System Management 4-38
System Management 4-56
System Management 4-42
System Management 4-8
System Management 4-9
System Management 4-11
System Management 4-14
System Management 4-8
System Management 4-42
System Management 4-42
System Management 4-42
Executive 4-1
Executive 4-1
Executive 4-1
Task Builder 3-23
MCR Operations 3-123
Error Logging 4-4
Error Logging 4-4
Error Logging 4-4
I/O Operations 4-8
Introduction Gloss-23
MCR Operations 4-46
MCR Operations 4-46
MCR Operations 4-46
RMS-11 Macros 5-86
RMS-11 Macros 7-3, 7-7, 7-11,
7-15
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 Macros 3-6
RMS-11 Macros 2-8
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 Macros 5-86
RMS-11 User's Guide B-1
RMS-11 Macros 3-9
Error Logging 4-4
I/O Operations 7-14
System Management 12-6 to 12-12,
12-17 to 12-20, 12-46 to
12-47
Introduction 5-6 to 5-7, 5-10,
Gloss-24
Command Language 7-38 to 7-45,
9-32
MCR Operations 2-19
Crash Dump Analyzer 3-21

Index-203

MASTER INDEX
Partition (Cont.)
common
creating
creating with SYSVMR.CMD
declaring
device
displaying
information
driver
relative address
accessing
DRVPAR
eliminating
EXCOMl
EXCOM2
FCPPAR
fragmentation
GEN
specifying a base address
in region
information
acquiring
for command file
displaying
main
creating
name
naming for target system
option
PAR14K
PCB address
relative address
accessing
requirement
shared region
requirements
region
size
for TKB
specifying
specifying a base addrress
specifying for region
SPLPAR
specifying a base address
SYS PAR
specifying a base address
system-controlled

boundary
moving
task
TT PAR

type

MCR Operations 3-186
System Management 14-1
System Generation (llS) 4-10
MCR Operations 3-185
System Management 10-51
System Generation (llM) 5-14
Task Builder 11-25
MCR Operations 3-186
System Management 10-51
System Generation (llS) 2-22
MCR Operations 3-136
System Generation {llM)
5-16
MCR Operations 3-187
System Management 10-52
System Generation {llM)
System Generation (llM)
System Generation {llM)
System Management 14-3
System Generation (llM)
5-16 to 5-17
System Generation (llM)
Task Builder 5-28

5-10,

5-15
5-15
5-16
5-12,
7-4

MCR Operations 4-54
MCR Operations 3-140
System Management 10-30
System Management 10-51
MCR Operations 3-185
Crash Dump Analyzer 3-21
Task Builder C-1
Task Builder 11-25
System Generation {llM) 5-18
Crash Dump Analyzer 3-21
MCR Operations 3-137
Task Builder 5-3
Task Builder 5-2
Task Builder F-2
System Management 10-51
System Generation (llM) 5-12
Task Builder 5-28
System Generation (llM) 5-13,
5-17 to 5-18
System Generation (llM) 7-5
System Generation (llM) 5-12,
5-16 to 5-18
System Generation (llM) 7-5
System Generation (llS} 2-6
System Generation (llM) 4-34
MCR Operations 2-20, 3-186
System Management 14-1
MCR Operations 3-202
System Management 10-47, 10-63
MCR Operations 3-186
System Generation (llM) 5-15
MCR Operations 2-20, 3-140, 3-186
System Management 10-51
Index-204

MASTER INDEX
Partition (Cont.)
user-controlled
...:i: •• :...:i:--

UJ.VJ.UJ.U'::j

Partition Control Block
See PCB
Partition control block switch
PARTITION DEFINITIONS command
VMR
Partition information
attachment descriptor
wait queue
Partition information dump
attachment descriptor
individual
system
wait queue
Partition status flags
/PASS option
Password
adding to account entry
changing
characters
contained in account entry
displaying
PASTE buffer
PAste command
EDI editor
PASTE command {nokeypad)
PASTE function
example with CUT and SELECT
PAT utility
checksum
command line
error message
file
correction
input
Task Builder
validating file content
Patch
D-space
declaring an object level
global relative
Patch level
RMSBCK utility
RMSCNV utility
RMSDEF utility
RMSDSP utility
RMS I FL utility
RMSRST utility
Patching
object module
See also PAT utility
source file
See SLP utility
task image file
See ZAP utility
Path loading
See also Overlays
example of
in autoload
Pattern

MCR Operations 2-20, 3-186
System Management 14-1
___

~~~

~----~:

l"l\..l'l

vpt::LCll...LVUi::i

~-~n

L-Lv

Crash Dump Analyzer 2-5
MCR Operations 3-140
System Management 10-30
Crash Dump Analyzer 3-34
Crash Dump Analyzer 3-34
Crash Dump Analyzer 3-31
Crash Dump Analyzer 3-33
Crash Dump Analyzer 3-31
Crash Dump Analyzer 3-31
Crash Dump Analyzer 3-33
PDP-11 MACR0-11 I-1
Introduction 1-6, Gloss-24
Command Language 3-3 to 3-4
System Management 2-3
MCR Operations 2-24
System Management 2-2, 2-5
System Management 2-3
System Management 2-1
System Management 2-4
EDT Editor 1-2, 2-1, 6-6
Utilities 2-42
EDT Editor 2-43, 8-15
EDT Editor 2-12, 5-33
EDT Editor 5-36
Utilities 14-6
Utilities 14-1
Utilities 14-7
Utilities 14-3
Utilities 14-3
Utilities 14-4
Utilities 14-6
Task Builder 11-13
Task Builder 11-5
Task Builder 11-19
RMS-11 Utilities 6-5
RMS-11 Utilities 4-9
RMS-11 Utilities A-5
RMS-11 Utilities 5-5
RMS-11 Utilities 3-5
RMS-11 Utilities 7-5
Release Notes 1-47

Task Builder 4-3 to 4-4
Task Builder 4-4
Task Builder 4-3 to 4-4

IOX

altering test

System Management 4-46
Index-205

MASTER INDEX
Pattern
IOX (Cont.)
displaying test
PATTERN command
IOX
/PATTERN switch
BAD utility
.PAUSE directive
format
PC
value
PC-relative
location
off set
/PCB
PCB
address in DCB
PCBDF$
PCL
receiver
device-specifc QIO
standard QIO
status return
transmitter
device-specifc QIO
standard QIO
status return
PCLll
See PCL
PCLll-B
/PD switch
RMSCNV utility
RMS I FL utility
$$POLS
PSECT
reserved PSECT name
PDP-11
PDR
PDS
linking
debugger
ODT
Percent sign (%)
See also Wildcard
in register expression
Percent sign (%) operator
Performance
See also Speed
improving TKB
Peripheral device
Peripheral Interchange Program
See PIP
Permanent symbol table
summary
Personal Printer
PF command
EDI editor

System Management 4-46
System Management 4-46
Utilities 6-6
MCR Operations 4-46
MCR Operations 4-46
Program Development 4-8
ODT 2-5, 4-5
ODT 2-10, 7-2
Crash Dump Analyzer 2-2
Writing I/O Driver 4-14
Crash Dump Analyzer B-31
I/O Drivers 13-9 to 13-11
I/O Drivers 13-8
I/O Drivers 13-11 to 13-12
I/O Drivers 13-3 to 13-5
I/O Drivers 13-3
I/O Drivers 13-6 to 13-8
I/O Drivers 13-1
RMS-11 Utilities 4-12
RMS-11 Utilities 3-6 to 3-7, 3-11
Task Builder 5-52
Task Builder E-3
Introduction 5-3, Gloss-3,
Gloss-24
Task Builder 2-16
ODT 8-2
ODT 1-3
Command Language 3-16, 4-7 to 4-8
PDP-11 MACR0-11 5-2
ODT 2-7, 4-7
Task Builder F-1
Introduction 5-1, 5-5, 5-10,
Gloss-24
Command Language 5-1
PDP-11 MACR0-11 3-6 to 3-7
PDP-11 MACR0-11 C-1 to C-7
I/O Drivers 2-4A
Utilities 2-41

Index-206

MASTER INDEX
Phase 1
SYSGEN
Phase 2
SYSGEN
Phase I
description
example
preperation
sections
Phase II
description
example
input files
RSXllM. OLB
RSXBLD.CMD
SGNPARM.CMD
TTDRVBLD.CMD
preperation
sections
Phase III
description
example
preperation
Physical
address
mapped system
space
Physical device

System Generation {llS) 1-2
System Generation (llS) 1-2
System Generation
System Generation
System Generation
System Generation

(llM)
(llM)
(llM)
(llM)

3-1
4-101
4-2
3-2

System Generation (llM) 3-2, 5-1
System Generation (llM) 5-20
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation

(llM)
(11.M)

(llM)
(llM)
(llM)
{llM)

5-1
5-1
5-1
5-1
5-2
3-3, 5-2

System Generation (llM) 3-4, 7-1
System Generation (llM) 7-7
System Generation {llM) 7-2

Physical device name
Physical I/O
Physical memory
Physical memory dump switch
/PI switch
PIC (Position Independent Code)
PIP
asterisk (*)
cleaning up a UFO
creating a concatenated object
module
examining listing at terminal
/LI
/ME
printing listing
/PU
/SP
spooling listing
PIP utility
account file
copying
extending
command functions
copying Files-11 file
file control
command line
error code
error message
file
deleting
listing
merging
protecting
purging
renaming

Task Builder 2-13
Task Builder 2-17
Executive 3-2
Command Language 5-1 to 5-3, 5-5,
5-8
Crash Dump Analyzer 3-17
I/O Drivers 1-18 to 1-20
I/O Drivers 1-2
Executive 3-4
Crash Dump Analyzer 2-4
Task Builder 10-31
PDP-11 MACR0-11 G-1 to G-4
Introduction 4-2, 4-14
Command Language B-1
Program Development 1-8
Program Development 3-10
Program Development 3-9 to 3-10
Program Development 4-3 to 4-4
Program Development 3-6, 4-6, 7-4
Program Development 3-9
Program Development 4-3 to 4-4
Program Development 3-8 to 3-9
Program Development 3-10
Program Development 3-8
Program Development 3-8 to 3-9
Command Language 1-17
System Management 2-2
System Management 2-2
Utilities 3-8
Utilities 3-8
Utilities 3-14
Utilities 3-1
Utilities 3-53
Utilities 3-43
Utilities
Utilities
Utilities
Utilities
Utilities
Utilities

Index-207

3-1 7
3-24
3-9
3-29
3-31
3-33

MASTER INDEX
PIP utility
file (Cont.)
spooling
file specification
default
wildcard
subswitch
description
merge
summary
switch
description
summary
UFD creating
wildcard
PIP/ENTER command (RMSBCK)
$PKAVL symbol
use of
in fault tracing
%PKT
PKTDF$
PL command
EDI editor
Placement control
calculating starting LBN
cylinder
indexed files
RMSBCK utility
RMSDEF utility
RMSRST utility
sector
track
PLAS directives
See Memory management
Platter
/PLCTL keyword
SET command
VMR
PLOCATE command
EDI editor
Plus operator
Plus sign {+) command
EDT
Plus sign (+) operator
/PM switch
PMD
enabling with TKB
requesting
• PMD file type
See also PMD
/PMD keyword
ABORT command
INSTALL command
VMR
RUN command
PMD task
installation for timely
opera ti on
PMT
See also Pool
aborting
tasks
assembling
checkpointing

Utilities 3-38
Utilities 3-1
Utilities 3-1 to 3-2
Utilities 3-7
Utilities 3-14
Utilities 3-6
Utilities 3-11
Utilities 3-3
Utilities 3-14
Utilities 3-5
Utilities 3-3
Utilities 3-41
Utilities 3-7
RMS-11 Utilities 6-3
Writing I/O Driver 3-28
Error Logging 5-22
Crash Dump Analyzer B-33
Utilities 2-41
RMS-11 User's Guide 1-17, 1-19
RMS-11 User's Guide 6-14
RMS-11 User's Guide 6-13 to 6-14
RMS-11 User's Guide 6-13
RMS-11 Utilities 6-1
RMS-11 Utilities A-14
RMS-11 Utilities 7-1
RMS-11 User's Guide 6-14
RMS-11 User's Guide 6-13 to 6-14
RMS-11 Introduction 2-1
MCR Operations 3-190
System Management 10-55
Program Development 2-15
PDP-11 MACR0-11 3-4
Introduction 2-13 to 2-14
ODT 2-3 to 2-4
Task Builder 10-32
System Generation (llM) 4-59
Program Development 1-7
Program Development 5-9
MCR Operations 3-4, 3-96, 3-153
System Management 10-23
Program Development 5-10
MCR Operations 3-4
MCR Operations 3-96
System Management 10-23
MCR Operations 3-153
Task Builder D-1
System Management 13-12
System Management 13-7 to 13-9,
13-11 to 13-12
System Management 13-1
System Management 13-5, 13-11
Index-208

MASTER INDEX
PMT (Cont.)
internal cycle interval
LINE FEED key
message to console
extreme fragmentation
low pool state
message to terminals
cycle interval
extreme fragmentation
low pool state
modifying
overview
PMTBLD.CMD
pool use controls

System Management 13-5, 13-11
System Management 13-8
System Management 13-7
System Management 13-6
System Management 13-6
System Management 13-7
System Management 13-6,
System Management 13-11
System Management 13-3
System Management 13-10
System Management 13-5,

13-11
to 13-12
to 13-12
13-12

preventing
invocation of TKTN
tasks from executing
response
extreme fragmentation
general fragmentation
pool condition
pool state
RETURN key
stopping
Task Builder options
task-building
unstopping
PMTBLD.CMD
PNC symbolic argument
• POINT
restrictions
Pointer
See Cursor
Pointer line and error message
POINTER statement
/POOL
Pool
See also Get-space routine
allocation failure
buffer descriptor block
condition
Executive response
fluctuation
high
low
PMT response
relationship to pool limit
controls
PMT
declaring space
definition
description
device influence
event
fragment
fragmentation
affecting pool state
extreme
general
reducing

System Management 13-7
System Management 13-7
System Management 13-1, 13-3 to
13-4, 13-7 to 13-10, 13-12
System Management 13-3 to 13-4
System Management 13-1, 13-3 to
13-4
System Management 13-3 to 13-5
System Management 13-8
System Management 13-5
System Management 13-10
System Management 13-1
System Management 13-5
System Management 13-10 to 13-12
PDP-11 MACR0-11 6-20
I/O Operations 2-9, 4-18
I/O Operations 4-18
EDT Editor A-1
Error Logging 5-38 to 5-39
Crash Dump Analyzer 2-2
Introduction 5-6, 5-8 to 5-9,
Gloss-24
System Management 13-2
RMS-11 Macros 2-8
System Management 13-1, 13-4
System Management 13-4
System Management 13-4
System Management 13-4
System Management 13-1, 13-3 to
13-4
System Management 13-2
System Management 13-5, 13-12
RMS-11 Macros 2-4
System Generation (llM) 1-3
System Generation (llM) 4-41
System Generation {llM) D-4
System Management 13-1
System Management 13-2 to 13-5,
13-13
System Management 13-9
System Management 13-3
System Management 13-1 to 13-4,
13-7 to 13-10, 13-12
System Management 13-2 to 13-4
System Management 13-13
Index-209

MASTER INDEX
Pool (Cont.)
free
free-space list
I/O buffer
index descriptor block
internal FAB
internal RAB
key buff er
largest fragment
limit
See also SET, /PLCTL
relationship to pool
condition
monitor code
See Executive
monitor interface
See Executive
monitoring
parameters
setting
PMT
secondary
SET /PLCTL command
size
calculating
displaying
increasing
specifying
smallest possible block
state
affected
by pool condition
by pool fragmentation
high
low
overriding Executive
notification
PMT response
system transition
task influence
total free bytes
Pool dump
/POOL keyword
SET command
VMR
Pool Monitor Task
See PMT
Pool statistics dump
POOL$B macro
POOL$E macro
declaring
Pool-declaration macro
declaring
/POOLSIZE keyword
SET command
VMR
Populating indexed files
primary key order
random insertions
bucket fill size

Crash Dump Analyzer 3-15
System Management 13-2
RMS-11 Macros 2-19
RMS-11 Macros 2-6
RMS-11 Macros 2-5
RMS-11 Macros 2-5
RMS-11 Macros 2-5
RMS-11 Macros 2-6
Crash Dump Analyzer 3-15

System Management 13-2, 13-4

System Generation (llM) 4-61
System Management 13-1
MCR Operations 3-190
System Management 10-55
System Generation (llM) 4-61
Introduction 5-7, Gloss-29
System Management 13-2, 13-12 to
13-13
System Generation (llM) D-1
MCR Operations 3-191
System Management 10-56 to 10-57
MCR Operations 3-191
System Management 10-56
System Generation (llM) 4-41
System Management 10-57
Crash Dump Analyzer 3-15
System Management 13-3
System Management 13-3
System Management 13-11, 13-13
System Management 13-11, 13-13
System Management 13-5
System Management 13-3 to 13-4
System Management 13-4
System Generation (llM) D-1
Crash Dump Analyzer 3-15
Crash Dump Analyzer 3-45
MCR Operations 3-191
System Management 10-56
Crash Dump Analyzer 3-1, 3-15
RMS-11 Macros 2-4, C-2
RMS-11 Macros 2-4
RMS-11 Macros C-2
RMS-11 Macros 2-4
RMS-11 Macros C-2
System Management 10-57
RMS-11 User's Guide 6-26
RMS-11 Oser's Guide 6-27
RMS-11 User's Guide 6-28
RMS-11 User's Guide 6-28
Index-210

MASTER INDEX
Populating indexed files
random insertions (Cont.)
mass insertion
T"'\l""\lf""'

l:'Uu

l..i.i:::.l.U

_ , ..::!

.:_

.i.ii

T~r.'1'7

fi.U.l

RMS-11 User's Guide 6-29

L_,
- - 1 ..
U.l.V\,,;l\.

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

CREATE operation
DISPLAY operation
offset
OPEN operation
summary
POSO field in KEY block
offset
POSl field in KEY block
offset
POS2 field in KEY block

5-18
5-31
6-68
5-80
6-89

RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68

off set
POS3 field in KEY block
offset
POS4 field in KEY block
off set
POSS field in KEY block
off set
POS6 field in KEY block
offset
POS7 field in KEY block
offset
.POSIT
POSITION
RMSDES utility
Position independent code
/POSITION qualifier
BRU utility
Positioning
mag tape
See FB$NEF mask in FOP field
See FB$POS mask in FOP field
.POSRC
Postmortem Dump
content
example
sample
specifying a
See also PMD
Power fail
recovery support
Power failure entry point
DDT conditions
Power-fail recovery
card reader
DMCll
DT07
I CS/ I CR
line pr inter
magnetic tape
.PPASC
/PR switch
PIP utility
/PR:O privileged
/PR:O privileged
/PR:4 privileged
/PR:4 privileged
/PR:S privileged
/PR:S privileged

Macros
Macros
Macros
Macros
Macros

task
task, uses of
task
task, uses of
task
task, uses of

RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68
I/O Operations 4-20
RMS-11 Utilities 2-46
PDP-11 MACR0-11 G-1 to G-4
Utilities 7-20

I/O Operations 3-24, 3-29, 4-19
Task Builder D-1
Task Builder D-3 to D-5
Task Builder D-2
Task Builder D-3 to D-5
Task Builder 10-32
System Generation (llM) 4-29
Writing I/O Driver 2-4
Writing I/O Driver 4-11
I/O Drivers 1-39
Release Notes 1-23
I/O Drivers 11-4
I/O Drivers 12-12
I/O Drivers 23-6
I/O Drivers 18-72
I/O Drivers 10-5
I/O Drivers 8-14
I/O Operations 4-7
Task Builder 6-2, 10-33
Utilities 3-29
Task Builder 6-2, 6-4 to 6-5
Task Builder 6-5
Task Builder 6-2, 6-4 to 6-5
Task Builder 6-5
Task Builder 6-2, 6-4 to 6-6
Task Builder 6-5

Index-211

MASTER INDEX
Preceding location
opening
Predefined syntax element
MML
Predefined syntax elements
MML
PRE PG EN
See also MCR inhibit
Phase I
Phase II
PRG field in PRO block
CLOSE operation
DISPLAY operation
offset
OPEN operation
RSTS/E
summary
PRI command
file switches
format
job switches
/PRI keyword
ALTER command
VMR
INSTALL command

VMR
RUN command
PRI option
Primary index
See also Index
RMSCNV utility
RMSIFL utility
Primary key
RMSCNV utility
RMSDEF utility
definition
RMSIFL utility
sorting
.PRINT
error handling
PRINT command

command qualifiers
DCL
definition
EDI editor
exampie
file qualifiers
format
MCR
processing
.PRINT directive
PRINT FORMATTING statement
keyword string
Print head
Print job
definition
queued by system tasks
maps, logs, listings
PIP
queued by user tasks

ODT 4-4
System Management 12-40
System Management 12-39, 12-41 to
12-45
System Generation (llM) 3-11
System Generation (llM) 4-4
System Generation (llM) 5-4
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros 5-3
Macros 5-32
Macros 6-108
Macros 5-81
Macros D-4
Macros 6-112

Batch and Queue 2-3
Batch and Queue 2-3
Batch and Queue 2-3
MCR Operations 3-15
System Management 10-8
MCR Operations 3-96
System Management 10-23
MCR Operations 3-154
Task Builder 11-27
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Utilities 4-1
Utilities 3-10 to 3-11
Introduction 3-7
User's Guide 1-7, 1-11
Utilities 4-1, 4-16

RMS-11 Utilities A-10
RMS-11 Utilities 3-5 to 3-6
RMS-11 Utilities 3-9
I/O Operations 8-2
EDT Edi tor 7-13
Introduction 3-7, 6-1 to 6-2
Batch and Queue 1-3, 2-2
Command Language 4-52 to 4-61,
9-28 to 9-29
Batch and Queue 2-3
Program Development 1-12, 3-8
Batch and Queue Gloss-6
Utilities 2-17, 2-42
Batch and Queue 2-7
Batch and Queue 2-3
Batch and Queue 2-3
Program Development 3-9
Batch and Queue 1-4 to 1-6
PDP-11 MACR0-11 7-15
Error Logging 5-41
Error Logging 5-41 to 5-42
Introduction 1-1, 1-4, 1-6, 2-5,
Gloss-24
Batch and Queue Gloss-7
Batch and Queue 2-12
Batch and Queue 2-12
Index-212

MASTER INDEX
Print job
queued by user tasks (Cont.)
• PRINT
T"'lt.T"\T'-'Tm

J:"'t"\J.l~

.I.

Batch and Queue 2-13

------...:l

n - ~-\...

;;;>Q 11.. ..... U

i.,.;Vlil.iilQHU

submission notification
Print line truncation
Print processor
See also Despooler
definition
/PRINT qualifier
SHOW QUEUE command
Print Spooling
.PRINT subroutine
PRINT$

--~
QU'U.

n
......... 11 .........
'\i(YC,_.o;;;

'>-1
'2
L.
.._ ~

Batch and Queue 2-2
I/O Drivers 10-7
Batch and Queue 1-3
Batch and Queue Gloss-6
Batch and Queue 2-16
I/O Operations 8-1
I/O Operations 8-2

error handling

I/O Operations 8-2
I/O Operations 8-1
I/O Operations 8-1
Program Development 1-12
RMS-11 Macros 3-1, 5-20, 5-37,
5-42, 5-77, 5-88, 5-104,
5-111, 5-11 7
I/O Drivers 10-2
I/O Drivers 10-2
I/O Drivers 10-2
I/O Drivers 10-2
I/O Drivers 10-2

error returns
macro
Printer

LA180
LNOl
LPll
LSll
LVll
PRINTSUMMARY command

System Management 4-47

IOX

/PRIO job switch
QUE /MOD command
/PRIO switch
PRI command
Priority

Batch and Queue 2-20
Batch and Queue 2-5
Introduction 5-5 to 5-7, Gloss-24
to Gloss-25
Command Language 7-59 to 7-60,
9-33
Batch and Queue Gloss-7

definition
task
declaring
/PRIORITY job qualifier
SET QUEUE command
/PRIORITY qualifier
PRINT command
/PRIV keyword
SET command
VMR
/PRIV subkeyword
CLI command
Private buffer pool
See BPA field in FAB
See BPS field in FAB
Private device

Task Builder 11-27
Batch and Queue 2-20
Batch and Queue 2-5
MCR Operations 3-191
System Management 10-57
MCR Operations 3-38

Introduction 3-12
Command Language 5-9, 5-13, 5-22
to 5-25
MCR Operations 4-9
Introduction 1-22, 5-5, Gloss-25
MCR Operations 2-6, 2-18
MCR Operations 3-191
System Management 10-57

<PRIVIL> symbol
Privilege
terminal
specifying
Privileged and nonprivileged task
distinction between
Privileged task
accessing
Executive with a
I/O page with a
building a
comparison of nonprivileged and

Task Builder 6-1
Task Builder 2-25, 6-1
Task
Task
Task
Task

Index-213

Builder 6-4
Builder 6-4
Builder 6-6 to 6-11
Builder 6-1

MASTER INDEX
Privileged task (Cont.)
hazards of a
in a mapped system
logging off from
MAC command sequence
map of
mapping of
/PR:O
/PR:4
/PR:5
processor trap in a
specifying
specifying a
TKB command sequence
to examine unit control block
Privileged user
PRJ field in PRO block
CLOSE operation
DISPLAY operation
off set
OPEN operation
RSTS/E
summary
PRO block
chaining to FAB
declaring
initializing
summary
PRO field in PRO block
CLOSE operation
CREATE operation
DISPLAY operation
off set
OPEN operation
RSTS/E
summary
/PRO keyword
HOME command
INI command
MOUNT command
UFO command
PRO macro
MML
PRO/RMS-11
contrasted with RSTS/E RMS-11
contrasted with RSX-11 RMS-11
$PROC
predefined syntax element in
MML
PROCEDURE statement
Proceed
command
count
PROCEED command

Task Builder 6-1 to 6-2
Task Builder 6-1
Task Builder 6-1
Task Builder 6-9
Task Builder 6-10 to 6-11
Task Builder 6-2 to 6-3
Task Builder 6-2, 6-4 to 6-5
Task Builder 6-2, 6-4 to 6-5
Task Builder 6-2, 6-4 to 6-6
Task Builder 6-2
Task Builder 2-25
Task Builder 6-2
Task Builder 6-10
Task Builder 6-6 to 6-11
Introduction 5-5, Gloss-25
RMS-11 Macros 5-3
RMS-11 Macros 5-32
RMS-11 Macros 6-108
RMS-11 Macros 5-81
RMS-11 Macros D-4
RMS-11 Macros 6-113
RMS-11 Introduction 4-8
RMS-11 Macros 2-12 to 2-13
RMS-11 Macros 2-8
RMS-11 Macros 2-9
RMS-11 Macros 6-108
RMS-11 Macros 5-3
RMS-11 Macros 5-11
RMS-11 Macros 5-32
RMS-11 Macros 6-108
RMS-11 Macros 5-81
RMS-11 Macros D-4
RMS-11 Macros 6-114
MCR Operations 3-73
MCR Operations 3-84
MCR Operations 3-123
MCR Operations 3-219
System Management 12-36 to 12-37
RMS-11 Macros D-1
RMS-11 Macros D-3
System Management 12-44
Error Logging 5-33 to 5-34
ODT 2-10, 3-2 to 3-3
ODT 2-7, 3-3
System Management 4-48

IOX

Process
state
Process control
asynchronous
synchronous
Processing
RMSBCK utility
data integrity checking
explicit/implicit file-spec
extended diagnostic messages
summary listing
RMSCNV utility

Writing I/O Driver 2-10
Introduction 5-2
I/O Drivers 14-3, 15-16
I/O Drivers 14-3, 15-16
RMS-11 Utilities 6-8
RMS-11 Utilities 6-9
RMS-11 Utilities 6-9
RMS-ii Utiiities 6-10
RMS-11 Utilities 6-10
RMS-11 Utilities 4-14

Index-214

MASTER INDEX
Processing
RMSCNV utility (Cont.)
input file organization
output file organization
RMSDEF utility
RMSIFL utility
building alternate indexes
command string checking
loading output file
reading and sorting input
sorting alternate key files
summary
terminating
RMSRST ~tilit~
.
data integrity check1ng
explicit/implicit file-spec
extended diagnostic messages
restoration account
summary listing
Processing blocks
Processing files
indexed files
re la ti ve files
sequential files
Processing records
indexed files
relative files
sequential files
Processor
halting
memory size
rotating pattern in data lights
valid on RSX-llM
with switch register
Processor priority
Processor Status Word
See also PSW
register
Program
development step
entry point definition
fixed line number
limit
modularity
section
additive displaced relocation
additive relocation
adjacency requirement for
allocation
attribute
attribute restriction
blank (.BLK)
creation
displaced relocation
element
'
extension of
in shared region
making autoloadable
name
name conflict
naming restriction
ordering
overlay allocation

RMS-11 Utilities 4-16
RMS-11 Utilities 4-15
RMS-11 Utilities A-1
RMS-ll Utilities 3-9
RMS-11 Utilities 3-12
RMS-11 Utilities 3-9
RMS-11 Utilities 3-10
RMS-11 Utilities 3-9
RMS-11 Utilities 3-11
RMS-11 Utilities 3-1
RMS-11 Utilities 3-12
RMS-ll Utilities 7-9
RMS-11 Utilities 7=11
RMS-11 Utilities 7-10
RMS-11 Utilities 7-11
RMS-11 Utilities 7-10
RMS-11 Utilities 7-12
RMS-11 Introduction 4-1, 4-7
RMS-11 User's Guide 1-20
RMS-ll Introduction 4-1
RMS-11 User's Guide 1-16
RMS-11 User's Guide 7-10
RMS-11 User's Guide 4-15
RMS-ll User's Guide 3-15
RMS-11 Introduction 4-1, 4-3
RMS-ll User's Guide 1-10, 1-15
RMS-11 User's Guide 7-2
RMS-11 User's Guide 4-7
RMS-11 User's Guide 3-7
System Management 8-4
System Generation (llM) 4-11
System Generation (llM) 4-33
System Generation (llM) 4-10
System Generation (llM) 4-10
Error Logging 4-20
Crash Dump Analyzer 3-2
ODT B-1
ODT 2-6, 5-3
Introduction Gloss-25
Task Builder 1-1
PDP-11 MACR0-11 6-39
EDT Editor 6-3
Task Builder A-18
PDP-11 MACR0-11 6-43
Task Builder 5-53
Task Builder A-21
Task Builder A-20
Task Builder 10-46
Task Builder 2-2
Task Builder 2-4
Task Builder 2-3
Task Builder 2-3
Task Builder 2-3
Task Builder A-19
Task Builder 2-2
Task Builder 11-14
Task Builder 5-7
Task Builder 4-3
Task Builder 2-3
Task Builder 5-7, 5-39 to 5-40
Task Builder 5-7
Task Builder 5-7, 10-36, 10-46
Task Builder 3-19

Index-215

MASTER INDEX
Program
section (Cont.)
relocation
resolution of
resolving names
resolving names in region and
task
save attribute
segregating
sequential ordering of
space allocation
specifying explicitly in
overlay
specifying in overlay
virtual
section name
applying autoload indicator
section name entry
section name flag byte
sectioning
transfer address
user
breakpoints
setting
FORTRAN IV
library
macro symbol
definition placement
module
name
version
object library routines
overview of development
section definiton
system routines
version
identification
Program counter
See also PC
definition
Program development
optimizing
Program execution
continuing
resuming
Program identification directive
Program section
absolute
context saving
creating
directive
See .PSECT directive
generated by TPARS
limit on quantity
local symbol block control
named
in region
relocatable
table
virtual
allocating physical memory to

a
attaching virtual attribute
to a
building a task using

Task Builder A-19
Task Builder 3-19
Task Builder 5-7, 5-39 to 5-40
Task
Task
Task
Task
Task

Builder 5-16
Builder 2-7
Builder 10-36, 10-46
Builder 10-36, 10-46
Builder 2-5 to 2-6

Task Builder 3-28
Task Builder 3-19
Task Builder 5-53
Task Builder A-7
Task Builder 4-3
Task Builder A-8
Task Builder A-8 to A-9
Program Development 1-4 to 1-5,
2-5, 2-8 to 2-9
PDP-11 MACR0-11 6-39
Program Development 5-6
Program Development 7-3
Program Development 6-1
Program Development 6-4
Program Development 1-5
Program Development 2-3, 2-5
Program Development 2-5
Program Development 6-6
Program Development 1-13 to 1-14
Program Development 2-8 to 2-9
Program Development l""ll
Task Builder A-10
PDP-11 MACR0-11 5-1
PDP-11 MACR0-11 3-10
RMS-11 User's Guide 8-9
ODT 3-2
ODT 3-2
PDP-11 MACR0-11 6-16 to 6-17
PDP-11 MACR0-11 6-42, 6-44 to
6-45
PDP-11 MACR0-11 6-47 to 6-48
PDP-11 MACR0-11 6-43 to 6-44
I/O Operations 7-10
PDP-11 MACR0-11 6-43
PDP-11 MACR0-11 6-19 to 6-20
Task Builder 5-13

PDP-11 MACR0-11 6-44 to 6-45
PDP-11 MACR0-11 1-1
Task Builder 5-56
Task Builder 5-56
Task Builder 5-58 to 5-61

Index-216

MASTER INDEX
Program section
virtual {Cont.)
creating a
FORTRAN run-time support for
option usage
specifying
specifying base address for a
specifying length
specifying physical size
specifying window size
support for a
Program section naming
table
Program sectioning directive
.ASECT
.CSECT
.PSECT
.RESTORE
.SAVE
Program version number
See Version identifier
Programming
advanced
techniques
Programming convention
general
Programming protocol
summary
Programming standard
Prologue
indexed files
bucket size
relative files
Prologue version number
See PVN field in SUM block
Prompt

EDT
explicit
explicit MCR
displaying
implicit
ODT
RMSBCK utility
RMSCNV utility
RMSDES utility
conditional
RMSDSP utility
RMSIFL utility
RMSRST utility
specifying
task
terminal
default
type
user-specified
/PROMPT subkeyword
CLI command
Prompting
CLI

Task
Task
Task
Task
Task
Task
Task
Task
Task

Builder 5-56, 5-58 to 5-61
Builder 5-56 to 5-57
Builder 5-55
Builder 11-38
Builder 5-56
Builder 5-54
Builder 5-54
Builder 5-54
Builder 5-56 to 5-57

System Library 2-3
PDP-11 MACR0-11 6-40
PDP-11 MACR0-11 6~46
PDP-11 MACR0-11 6-46
PDP-11 MACR0-11 6-40
PDP-11 MACR0-11 6-47
PDP-11 MACR0-11 6-47

to 6-48
to 6-47
to 6-47
to 6-45
to 6-48
to 6-48

Program Development 1-6
Writing I/O Driver 2-13
System Library 1-1
Writing I/O Driver 2-14
Writing I/O Driver 2-16
PDP-11 MACR0-11 E-1 to E-16
RMS-11 Introduction 3-15
RMS-11 User's Guide 1-19
RMS-11 User's Guide 5-2
RMS-11 User's Guide 5-2
RMS-11 User's Guide 4-1
Introduction 1-3, 1-11, 2-3, 4-6,
4-11, Gloss-12, Gloss-16 to
Gloss-17, Gloss-25
Command Language 1-3, 3-15
Introduction 2-3
Introduction 1-5, Gloss-12,
Gloss-25
MCR Operations 1-3
MCR Operations 2-16
Introduction 1-6, 2-15, Gloss-16
to Gloss-17, Gloss-25
ODT 1-4
RMS-11 Utilities 6-2
RMS-11 Utilities 4-3
RMS-11 Utilities 2-2
RMS-11 Utilities 2-1, 2-13, 2-15,
2-17, 2-29
RMS-11 Utilities 5-2
RMS-11 Utilities 3-2
RMS-11 Utilities 7-2
MCR Operations 3-36 to 3-37
MCR Operations 2-14
MCR Operations 2-14
MCR Operations 2-13
I/O Operations 6-4, 6-10
MCR Operations 3-38
System Management 11-7 to 11-9

Index-217

MASTER INDEX
$PRONC
predefined syntax element in
MML
PROTECTION
RMSDES utility
Protection
file

System Management 12-44
RMS-11 Utilities 2-33
RMS-11 User's Guide 1-18
Introduction 3-6, 5-6, Gloss-25
to Gloss-26
Command Language 2-6, 4-79 to
4-82, 5-28, 5-38, 5-51, 5-58,
9-33
System Management 2-2

See also PRO field in PRO block
System Generation (llM) 4-26
multi user
RMSDEF utility
RMS-11 Utilities A-18
RMSRST utility
RMS-11 Utilities 7-7
Command Language 5-31, 5-38, 5-52,
volume
5-58
XAB
See PRO block
Protection code
file
PIP utility
Utilities 3-26
/PROTECTION qualifier
Utilities 7-20
BRU utility
RMS-11 User's Guide 8-3
Prototype ODL file
Prototype task
System Management 7-1
batch processor
System Management 7-1
de spool
Error Logging 4-4
PRS2AM
Error Logging 4-4
PRS2BM
PRT print spooler
System Generation (llM) 4-60
System Management 7-7
PRT •••
PSECT
I/O Operations 7-10
See also Program section
.PSECT directive
PDP-11 MACR0-11 3-11, 6-40 to
6-45
Program Development 2-8 to 2-9
Task Builder 3-28
See also Program section
symbolic argument
PDP-11 MACR0-11 6-40 to 6-42
PSECT name
.FCTR directive
argument
Task Builder 3-25
Introduction 3-8, Gloss-26
Pseudo device
Command Language 5-1 to 5-8
Command Language 5-6
CL:
CO:
Command Language 5-6
Command Language 5-6
LB:
name
I/O Drivers 1-21
NL:
Command Language 5-6
SY:
Command Language 4-2, 4-77 to
4-79, 5-6, 5-72 to 5-73, 9-31
ColDllland Language 5-7
TI:
WK:
Command Language 5-6
Executive 1-2
PSW
$PTBYT routine
Writing I/O Driver 5-21
.PTLUN
Task Builder E-2
reserved global symbol
Writing I/O Driver 5-22
$PTWRD routine
Writing I/O Driver 5-1
conditional assembly
inclusion of
by SYSGEN
Writing I/O Driver 3-2
/PU switch
PIP utiiity
Utilities 3-31

Index-218

MASTER INDEX
/PUB keyword
MOUNT command
SET command
VMR
Public device
Punched card
PURGE command
DCL
PUT argument to ORG$ macro
$PUT macro
key access
sequential access
PUT operation
access modes
and key position
and ODLs
and shared access
and stream records
declaring with ORG$ macro
deferred write
duplicate keys
indexed files
key access
mass insertion
sequential access
initial allocation
key access
locate mode
move mode
indexed files
relative files
sequential files
optimizing
$PUT macro
key access
sequential access
relative files
key access
sequential access
sequential access
sequential files
key access
sequential access
PUT statement
PUT$
FDB
locate mode
move mode
random mode
PUT$ macro call
format
parameters
PUT$R
PUT$R macro call
format
parameters
PUT$S
PUT$S format
See PUT$
PVN field in SUM block
DISPLAY operation
offset
OPEN operation

MCR Operations 3-123
MCR Operations 3-192
System Management 10-57
Command Language 5-9, 5-13, 5-75
I/O Drivers 11-1
Introduction 3-9 to 3-10
Command Language 4-34 to 4-37,
9-29
Program Development 3-9
RMS-11 Macros 2-3
RMS-11 Macros 5-95
RMS-11 Macros 5-91
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-10
RMS-11 Introduction 4-6
RMS-11 User's Guide 6-7
RMS-11 User's Guide 8-5
RMS-11 User's Guide 2-6
RMS-11 User's Guide 2-17
RMS-11 Macros 2-3
RMS-11 User's Guide 7-9
RMS-11 User's Guide 6-9
RMS-11 User's Guide 7-5, 7-9
RMS-11 User's Guide 5-10, 7-6
RMS-11 User's Guide 7-9
RMS-11 User's Guide 5-17, 7-6
RMS-11 User's Guide 4-4
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-14
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 7-7
User's Guide 4-12
User's Guide 3-13
User's Guide 6-7

RMS-11 Macros 5-95
RMS-11 Macros 5-91
RMS-11 User's Guide 4-11
RMS-11 User's Guide 4-11
RMS-11 User's Guide 4-11
RMS-11 User's Guide 1-16
RMS-11 User's Guide 3-10
RMS-11 User's Guide 3-10
RMS-11 User's Guide 3-10
Error Logging 4-31, 5-39
I/O Operations 3-24
I/O Operations 3-26
I/O Operations 3-24, 3-27
I/O Operations 3-24, 3-26
I/O Operations 3-24
I/O Operations 3-25
I/O Operations 3-25
I/O Operations 3-28
I/O Operations 3-29
I/O Operations 3-29
I/O Operations 3-30

RMS-11 Macros 5-32
RMS-11 Macros 6-145
RMS-11 Macros 5-81
Index-219

MASTER INDEX
PVN field in SUM block (Cont.)
summary
PWRUP routine

RMS-11 Macros 6-151
Executive 5-54

Q
Q error
summary
Q register
indicator
$QERMV
$QINSP routine
QIO

$C form
device-independent
device-specific
A/D converter
card reader
cassette
DECtape
disk
DT07
graphic display driver
ICS/ICR
laboratory peripheral system
LPAll-K
magnetic tape
message-oriented
communication
PCL receiver
PCL transmitter
RASO
terminal
TU58
UDCll
diagnostic
$ form
function summary
macro format
$8 form
standard
A/D converter
card reader
cassette
DECtape
disk
DT07
graphic display driver
ICS/ICR
laboratory peripheral system
line printer
magnetic tape
message-oriented
communication
paper tape
PCL receiver
PCL transmitter
terminal
TU58
UDCll
summary of form
QIO directive
position of
in I/O hierarchy
preinitiation processing of

PDP-11 MACR0-11 3-16, 6-28 to
6-29, 6-33, 6-37, 7-8
PDP-11 MACR0-11 D-4
ODT 2-6, 4-1, 5-3, 7-2 to 7-3
ODT 2-3, 2-10, 7-3
Error Logging 4-25
Writing I/O Driver 5-23
I/O Drivers 1-16
I/O Drivers 1-15
I/O Drivers C-1
I/O Drivers 14-2 to 14-3
I/O Drivers 11-3
I/O Drivers 9-3
I/O Drivers 6-3
I/O Drivers 5-7 to 5-8
I/O Drivers 23-4 to 23-6
I/O Drivers 20-2
I/O Drivers 18-8 to 18-12
I/O Drivers 16-3 to 16-9
I/O Drivers 21-27 to 21-29
I/O Drivers 8-4 to 8-9
I/O Drivers 12-5 to 12-7
I/O Drivers 13-9 to 13-11
I/O Drivers 13-3 to 13-5
I/O Drivers 5-8
I/O Drivers 2-8 to 2-10, 3-5 to
3-6
I/O Drivers 7-3 to 7-4
I/O Drivers 15-3 to 15-9
System Generation (llM) 4-27
I/O Drivers 1-14
I/O Drivers A-1
I/O Drivers 1-9
I/O Drivers 1-15
I/O Drivers 14-2
I/O Drivers 11-2
I/O Drivers 9-2
I/O Drivers 6-2
I/O Drivers 5-5 to 5-7
I/O Drivers 23-2 to 23-3
I/O Drivers 20-2
I/O Drivers 18-8 to 18-12
I/O Drivers 16-2
I/O Drivers 10-3
I/O Drivers 8-4
I/O Drivers 12-5
I/O Drivers 17-2
I/O Drivers 13-8
I/O Drivers 13-3
I/O Drivers 2-7
I/O Drivers 7-2 to 7-3
I/O Drivers 15-3
I/O Drivers 1-14
Writing I/O Driver 2-2
Writing I/O Driver 2-11

Index-220

MASTER INDEX
QIO directive {Cont.)
role of
in I/O processing
QIO Directive Parameter Block
QIO function
executing
QIO packets
pre-allocated
QIO$
QIO$ directive
QIOW$
QMG

Writing I/O Driver 2-3
Writing I/O Driver 4-6
I/O Operations 4-20
System Generation (llM) 4-37
Executive 5-112
I/O Operations 2-41 to 2-42
Executive 5-116
I/O Drivers 1-16
Batch and Queue 1-1
Comm~nd,Lang~age 1-16, 4-52, 9-44,
~-4t>,

definition
dequeuing jobs
output
queuing jobs
special applications
stopping
using SHUTUP
suppress messages from
using DCL
using MCR
QMGCLI
$QRMVF routine
use of
with ACP
QUA macro
MML
Qualifier
BRU utility
command
command file
DCL
list
example
filespec
floating
purpose
Qualifier, MACRO command
Quantity register
indicator
QUE /AS command
MCR
QUE /CR command
MCR
QUE /DEA command
MCR
QUE /DEL command
format
MCR
QUE /DEL:Q command
MCR
QUE /HO command
format
entry number
job name
QUE /KIL command
MCR
QUE /LI command
batch queue

B-.i

Program Development 1-12
System Management 7-1
Batch and Queue Gloss-7
Batch and Queue 2-1
Batch and Queue 1-3
Batch and Queue 2-1
Batch and Queue 1-2
System Management 8-4
Release Notes 1-36
Release Notes 1-36
System Management 7-1 to 7-2
Writing I/O Driver 5-24
Writing I/O Driver D-6
System Management 12-37 to 12-38
Introduction 2-3, Gloss-27
Utilities 7-12
Introduction 2-3, Gloss-7,
Gloss-27
EDT Editor 4-1
EDT Editor 4-2
Command Language 1-3 to 1-5
EDT Editor 4-3
EDT Editor 4-7
Introduction Gloss-15, Gloss-27
Command Language 1-3 to 1-5
EDT Editor 4-1
PDP-11 MACR0-11 8-8
ODT 2-6, 5-3, 7-3
ODT 2-10, 7-3
System Management 7-8, 7-12, 7-22
System Management 7-4, 7-11, 7-13
System Management 7-22
Batch and Queue 2-10
System Management 7-19
System Management 7-20
Batch and Queue 2-22
Batch and Queue 2-22
System Management 7-25
Batch and Queue 2-14
Batch and Queue 1-9
Index-221

MASTER INDEX
QUE /LI command (Cont.)
display
format
print queue
QUE /LI display
switches
QUE /LI:DEV command
format
QUE /MOD command
example
file format
switches
job format
switches
QUE /REL command
format
entry number
job name
QUE /SP command
DCL
MCR
/FO keyword
QUE /STA command
MCR
QUE /STA:QMG command
MCR
QUE /STO command
MCR
QUE /STO:QMG command
MCR
QUE /STO:QUE command
MCR
QUE /UNSP command
MCR
Query mode
RMSBCK utility
RMSRST utility
QUERY qualifier
MOVE
Question
default response
examples
format
logical order
Question mark (?)
ODT
Question mark (?) symbol
Queue
assignments
clock
definition
device
definition
device-specific
disk file
definition
disk·file (QUEUE.SYS)
RSX-llM
displaying information
general
job
holding
releasing
status

Batch and
Batch and
Batch and
Batch and
Batch and

Queue
Queue
Queue
Queue
Queue

2-16 to 2-17
2-15
1-9
1-10
2-15

Batch and Queue 2-18
Batch and Queue 2-21
Batch and Queue 2-19
Batch and Queue 2-19
Batch and Queue 2-23
Batch and Queue 2-23
System Management 7-18
System Management 7-6, 7-13 to
7-17, 7-19
System Management 7-17
System Management 7-26 to 7-31
System Management 7-3, 7-26 to
7-27
System Management 7-23 to 7-25
System Management 7-23
System Management 7-23
System Management 7-20 to 7-22
RMS-11 Utilities 6-5 to 6-7, 6-10
RMS-11 Utilities 7-6 to 7-8, 7-11
EDT Editor 7-3, 7-17
EDT Editor 7-12
System Generation
System Generation
System Generation
System Generation

(llM) 3-6
(llM) 3-6
(llM) 3-5
(llM) 3-7

Program Development 5-3
ODT A-1
Batch and Queue 1-1
Batch and Queue 1-2
Command Language 7-12 to 7-15,
7-23, 7-60, 9-37
Batch and Queue Gloss-7
Batch and Queue Gloss-3
Batch and Queue 1-2, Gloss-3
Batch and Queue Gloss-7
Batch and Queue 1-1
Batch and Queue 2-1
Batch and Queue 1-2, Gloss-5
Batch and Queue 2-1
Batch and Queue 2-1
Index-222

MASTER INDEX
Queue
job
status (Cont.)
altering
PRINT
definition
Queue I/O and Wait
See QIOW$
Queue I/O Request
See QIO
Queue I/O Request And Wait
directive
Queue I/O Request directive
Queue Manager
See QMG
Queue manager
/QUEUE:queuename qualifier
PRINT command
Queuename parameter
DELETE command
Queuename switch
PRI command
Quiet mode
/QUIET subkeyword
CLI command
QUIT command
EDT
keypad editing
line editing
nokeypad editing
RMSDES utility
QUIT/SAVE
example
line editing
RECOVER qualifier
simulate system failure
Quotation mark
command line with
EDT
Quotation mark (") operator
Quote character
Quoted string
file specification
remote file specification
QUPKT

Batch and Queue 2-1
Batch and Queue Gloss-7

Executive 5-116
Executive 5-112
System Generation (llM) 4-35
Batch and Queue 2-4
Batch and Queue 2-10
Batch and Queue 2-4
MCR Operations 4-33
MCR Operations 3-38
EDT Editor 5-9, 5-21, 7-14, 8-15
Introduction 2-14 to 2-15
EDT Editor 2-20, 5-9
EDT Editor 7-14
EDT Editor 8-15
RMS-11 Utilities 2-2, 2-12, 2-18
EDT
EDT
EDT
EDT

Editor
Editor
Editor
Editor

3-4
7-14
3-2
3-2

MCR Operations 1-2
Introduction 2-13 to 2-14
ODT 2-7, 4-6
PDP-11 MACR0-11 6-25
RMS-11 User's Guide A-5
RMS-11 User's Guide B-2
Error Logging 4-24

R
R command
ZAP utility
R error
summary
"R operator
R register
/R switch
R$-family macro
declaring
/RS switch
DMP utility
$R50
predefined syntax element in
MML
/RA switch
RMSBCK utility

EDT Editor 8-15
ODT 2-10
Utilities 15-18
PDP-11 MACR0-11 3-10
PDP-11 MACR0-11 D-4
PDP-11 MACR0-11 3-5, 6-30
ODT 2-7, 5-5 to 5-6
Error Logging 2-4, 2-7, 3-6, 3-20
RMS-11 Macros 2-9
RMS-11 Macros C-2
Utilities 11-7
System Management 12-41
RMS-11 Utilities 6-6 to 6-7, 6-9

Index-223

MASTER INDEX
/RA switch (Cont.)
RMSRST utility
RA60
RA60/80/81, RC25 tape kit
copying
on-line
stand-alone
RASO
RA81
RAB
declaring
initializing
summary
RAB$B macro
RAB$BT macro
RAB$E macro
declaring
RABOF$ macro
RAC field in RAB
FIND operation
GET operation
off set
PUT operation
summary
.RADSO directive
<RADSO> symbol
Radix control
temporary operator
Rad ix default
.RADIX directive

RMS-11 Utilities 7-7, 7-11
I/O Drivers 5-4

Radix-50
character set
displaying
eval ua ti on
operator (%)
separator(*)
temporary operator
Radix-50 conversion
ASCII to Radix-50 ($CATS)
ASCII with blanks to Radix-50
{$CAT5B)
Radix-50 to ASCII ($C5TA)
Random access

by key
FIND
GET
match criterion
PUT
by RFA
FIND
GET
by VBN
match criteria
to indexed files
to relative files
to sequential files
RANDOM command
IOX

System Generation (llM} 2-32
System Generation (llM) 2-6
I/O Drivers 5-4
I/O Drivers 5-4
RMS-11 Introduction 4-8
RMS-11 Macros 2-8
RMS-11 Macros 2-9
RMS-11 Macros 6-115
RMS-11 Macros 2-8, C-2
RMS-11 Macros C-2
RMS-11 Macros 2-9
RMS-11 Macros C-2
RMS-11 Macros C-2
RMS-11 Macros 4-4 to 4-6
RMS-11 Macros 5-49, 5-51, 5-54
· RMS-11 Macros 5-60, 5-63, 5-67
RMS-11 Macros 6-115
RMS-11 Macros 5-91, 5-95
RMS-11 Macros 6-127
PDP-11 MACR0-11 6-29 to 6-30
MCR Operations 4-9
PDP-11 MACR0-11 3-14, 6-31, 6-33
PDP-11 MACR0-11 6-31 to 6-32
PDP-11 MACR0-11 3-14
PDP-11 MACR0-11 3-14, 6-32 to
6-33
Command Language A-1
ODT 7-4
PDP-11 MACR0-11 A-4 to A-5
ODT 4-6 to 4-7
ODT 7-4
ODT 2-7, 4-6 to 4-7
ODT 2-5, 7-4
PDP-11 MACR0-11 6-30
System Library 4-6
System Library 4-8
System Library 5-11
Introduction 5-11 to 5-12,
Gloss-27
RMS-11 Introduction 2-4
RMS-11 User's Guide 1-7, 1-9
RMS-11 Introduction 3-12
RMS-11 User's Guide 1-12
RMS-11 User's Guide 1-16
RMS-ii User;s Guide i-16
RMS-11 Introduction 3-12
RMS-11 User's Guide 1-16
RMS-11 Introduction 3-11
RMS-11 User's Guide 1-12
RMS-11 User's Guide 1-16
RMS-11 User's Guide 1-16
RMS-11 Introduction 3-12
RMS-11 User's Guide 1-20
RMS-11 User's Guide 5-13
RMS-11 User's Guide 5-7, 5-9,
6-12
RMS-11 User's Guide 4-1
RMS-11 User's Guide 3-2
System Management 4-49

Index-224

MASTER INDEX
Random mode
Range
contiguous line
EDT

MOVE command
noncontiguous
SELECT function
single line
specifiers for noncontiguous
Trace program
RANGE command
IOX

Range specification
ALL
AND
BEFORE
BEGIN
contiguous 1 ine
description
END
FOR
for text buffer
LAST
noncontiguous line
number
ORIGINAL number
period (.)
REST
string
THRU
WHOLE
RAT field in FAB
CREATE operation
off set
OPEN operation
summary
FB$BLK mask
RATE command
RMD
RB$-family symbol
declaring
RB$ASY mask in ROP field
CONNECT operation
DELETE operation
DISCONNECT operation
FIND operation
FLUSH operation
FREE operation
GET operation
NXTVOL operation
PUT operation
READ operation
REWIND operation
RSTS/E
SPACE operation
summary
TRUNCATE operation
UPDATE operation
value
WRITE operation
RB$BID code in BID field
summary
value
RB$BLL code in BLN field
RSTS/E

I/O Operations 3-22
EDT Editor 6-10
Introduction 2-5 to 2-9, 2-11 to
2-14
EDT Editor 7-11
EDT Editor 6-11
EDT Edi tor 5-33
EDT Editor 6-7 to 6-8
EDT Edi tor 6-11
ODT 8-2
System Management 4-50
EDT Editor 2-23
EDT Editor 6-11
EDT Editor 6-11
EDT Editor 6-10
EDT Edi tor 6-8
EDT Editor 6-10
EDT Edi tor 6-7
EDT Editor 6-8
EDT Editor 6-10
EDT Editor 6-11
EDT Edi tor 6-8
EDT Editor 6-11
EDT Edi tor 6-8
EDT Editor 6-8
EDT Editor 6-8
EDT Editor 6-10
EDT Edi tor 6-8
EDT Editor 2-30, 6-10
EDT Editor 2-22, 6-10
RMS-11 Macros 5-11 to 5-12
RMS-11 Macros 6-23
RMS-11 Macros 5-78
RMS-11 Macros 6-59
RMS-11 Macros 6-60
System Management 6-8 tO 6-9 I
6-11 to 6-12A
RMS-11 Macros C-2
RMS-11 Macros 4-1
RMS-11 Macros 5-7
RMS-11 Macros 5-25
RMS-11 Macros 5-27
RMS-11 Macros 5-49, 5-51, 5-54
RMS-11 Macros 5-56
RMS-11 Macros 5-58
RMS-11 Macros 5-60, 5-63, 5-67
RMS-11 Macros 5-70
RMS-11 Macros 5-91, 5-95
RMS-11 Macros 5-98, 5-100
RMS-11 Macros 5-114
RMS-11 Macros D-4
RMS-11 Macros 5-120
RMS-11 Macros 6-131
RMS-11 Macros 5-122
RMS-11 Macros 5-124
RMS-11 Macros 6-115
RMS-11 Macros 5-127, 5-129
RMS-11 Macros 6-116
RMS-11 Macros 6-115
RMS-11 Macros D-4
Index-225

MASTER INDEX
RB$BLL code in BLN field (Cont.)
value
RB$BLN code in BLN field
value
RB$EOF mask in ROP field
CONNECT operation
summary
value
RB$FDL mask in ROP field
DELETE operation
summary
value
RB$KEY code in RAC field
FIND operation
GET operation
PUT operation
value
RB$KGE mask in ROP field
FIND operation
GET operation
summary
value
RB$KGT mask in ROP field
FIND operation
GET operation
summary
value
RB$LOA mask in ROP field
PUT operation
summary
UPDATE operation
value
RB$LOC mask in ROP field
CONNECT operation
GET operation
PUT operation
summary
value
RB$MAS mask in ROP field
PUT operation
summary
value
RB$RFA code in RAC field
FIND operation
GET operation
value
RB$SEQ code in RAC field
FIND operation
GET operation
PUT operation
value
RB$UIF mask in ROP field
PUT operation
summary
value
$RBCAL macro
RBF field in RAB
CONNECT operation
GET operation
offset
PUT operation
READ operation
summary
UPDATE opera ti on
WRITE operation
/RC switch
DMP utility

RMS-11 Macros 6-115
RMS-11 Macros 6-115
RMS-11 Macros 5-7
RMS-11 Macros 6-132
RMS-11 Macros 6-115
RMS-11 Macros 5-25
RMS-11 Macros 6-133
RMS-11 Macros 6-115
RMS-11 Macros 4-5
RMS-11 Macros 5-51
RMS-11 Macros 5-63
RMS-11 Macros 5-95
RMS-11 Macros 6-115
RMS-11 Macros 4-5 to 4-6
RMS-11 Macros 5-52
RMS-11 Macros 5-64
RMS-11 Macros 6-134
RMS-11 Macros 6-115
RMS-11 Macros 4-5 to 4-6
RMS-11 Macros 5-52
RMS-11 Macros 5-64
RMS-11 Macros 6-135
RMS-11 Macros 6-115
RMS-11 Macros 5-92, 5-96
RMS-11 Macros 6-136
RMS-11 Macros 5-124
RMS-11 Macros 6-115
RMS-11 Macros 4-7
RMS-11 Macros 5-6
RMS-11 Macros 5-61, 5-64, 5-68
RMS-11 Macros 5-92
RMS-11 Macros 6-137
RMS-11 Macros 6-115
RMS-11 Macros 5-92
RMS-11 Macros 6-138
RMS-11 Macros 6-115
RMS-11 Macros 4-6
RMS-11 Macros 5-54
RMS-11 Macros 5-67
RMS-11 Macros 6-115
RMS-11 Macros 4-4
RMS-11 Macros 5-49
RMS-11 Macros 5-60
RMS-11 Macros 5-91
RMS-11 Macros 6-115
RMS-11 Macros 4-4
RMS-11 Macros 5-92, 5-96
RMS-11 Macros 6-139
RMS-11 Macros 6-115
RMS-11 Macros C-3
RMS-11 Macros 4-7, 4-13
RMS-11 Macros 5-7
RMS-11 Macros 5-61, 5-65, 5-68
RMS-11 Macros 6-115
RMS-11 Macros 5-92 to 5-93, 5-95
RMS-11 Macros 5-99, 5-101
RMS-11 Macros 6-128
RMS-11 Macros 5-124
, "..,I I :,,-..i..G::J
, "'n
RMS-11 Macros :::;1-..i..G
~

Utilities 11-7

Index-226

MASTER INDEX
/RC switch (Cont.)
RMSBCK utility
RMSRST utility

RMS-11 Utilities 6-7, 6-9
RMS-11 Utilities 7-8, 7-11
Utilities 9-7
I/O Drivers 5-4A

VFY utility

RC25
RC25 disk kit
copying
on-line
stand-alone
RCML$
RCST$
RCT
bad block
detection
notification
replacement
replacement completion
revectoring

System Generation (llM) 2-34
System Generation (llM) 2-9
I/O Operations 6-9, 6-12
Executive 5-118
System Management 5-1

installing

logical block
recovery techniques for disks
relationship
Error Logger
RSX-llM utilities
replacement block
primary
secondary
RCVD$
RCVX$
/RD switch
RMSBCK utility
RD51
ROAF$
ROB
assigned setting
generating
generating in FORTRAN
macros
RDBBK$
macro call
macro expansion
RDBDF$
.RDFDR
.RDFFP
.RDFUI
$RDPAG (Read page)
$$RDSG
PSECT
reserved PSECT name
ROT field in DAT block
DISPLAY operation
off set
OPEN operation
RSTS/E
summary
RDXF$
/RE job switch
QUE /MOD command
/RE switch
PIP utility
VFY utility
REA command
VMR
Read
from console terminal
nondestructive
NFS volumes

System Management 5-3
System Management 5-3
System Management 5-3
System Management 5-4
System Management 5-4
System Management 5-2
System Management 5-2
System Management 5-1
System Management 5-5
System Management 5-5
System Management 5-2
System Management 5-4
System Management 5-4
Executive 5-120
Executive 5-122
RMS-11 Utilities 6-8 to 6-9
I/O Drivers 5-4A
Executive 5-125
Executive 3-11 to 3-12
Executive 3-19
Executive 3-12 to 3-13
Executive 3-14
Executive 3-12 to 3-13
Executive 3-12
Executive 3-13
Executive 3-13
Executive 3-12
I/O Operations 4-2
I/O Operations 4-5
I/O Operations 4-4
System Library 8-26
Task Builder 5-52
Task Builder E-3
RMS-11 Macros 5-32
RMS-11 Macros 6~14
RMS-11 Macros 5-81
RMS-11 Macros D-4
RMS-11 Macros 6-20
Executive 5-127
Batch and Queue 2-21
Utilities 3-33
Utilities 9-7
MCR Operations 3-143
System Management 10-32
Introduction Gloss-27
System Management 3-3
System Management 4-62

Index-227

MASTER INDEX
Read access
Read All Event Flags directive
REAd command
EDI editor
.READ directive
example
format
Read Extended Event Flags
directive
Read logical record
locate mode
move mode
random mode
$READ macro
sequential access
VBN access
Read Only qualifier
READ ONLY (DCL)
RO (MCR)
READ operation
access modes
$READ macro
sequential access
VBN access
Read virtual block
READ$
FOB
READ$ macro call
format
parameters
Read-ahead multiple buffering
Read-only
access declaration
sharing declaration
Read-only access
Read-pass-all option
Read/write
access declaration
sharing declaration
Read/write access
Readable-block context
Ready recovery
card reader
paper tape
Ready-to-run task
Real-time system
REASSIGN command
command line format
error message
example
VMR
command line format
example
Receive By Reference directive
Receive Data directive
Receive Data Or Exit directive
Receive Data Or Stop directive
Receive error
hard
Record
See also Record format
access mode
See also Access mode

MCR Operations 2-3
Executive 5-125
Utilities 2-42
MCR Operations 4-47
MCR Operations 4-47
MCR Operations 4-47
Executive 5-127
1/0 Operations 3-18
I/O Operations 3-18
I/O Operations 3-24
RMS-11 Macros 5-98
RMS-11 Macros 5-100
EDT Editor 4-4
EDT Editor 4-7
RMS-11 Introduction 4-7
RMS-11 Macros 4-14
RMS-11 Introduction 4-7
RMS-11 Macros 5-98
RMS-11 Macros 5-100
I/O Operations 3-30
I/O Operations 3-30
I/O Operations 3-34
I/O Operations 3-31
I/O Operations 3-31 to 3-33
I/O Operations 1-7, 2-18
RMS-11 User's Guide 2-6
RMS-11 User's Guide 2-7
PDP-11 MACR0-11 6-40
MCR Operations 3-195
System Management 10-58
RMS-11
RMS-11
PDP-11
RMS-11

User's Guide 2-6
User's Guide 2-7
MACR0-11 6-40
Macros 4-12

I/O Drivers 11-4
I/O Drivers 17-4
Introduction Gloss-33
Command Language 7-1
Introduction 5-1, 5-6, Gloss-28
MCR Operations 3-143
MCR Operations 3-143
MCR Operations 3-141
MCR Operations 3-143
System Management 10-32
System Management 10-32
System Management 10-32
Executive 5-136
Executive 5-120
Executive 5-122
Executive 5-118
I/O Drivers 2-36
RMS-11 Introduction 1-1
RMS-11 User's Guide 1-1
RMS-11 Introduction 3-11, 3-13
Index-228

MASTER INDEX
Record
access mode (Cont.)
See also RAC field in RAB
key
RFA
sequential
blocked
See FB$BLK mask in RAT field
buffer address
See RBF field in RAB
data
deleting
See DELETE operation
deleting, fast
See RB$FDL mask in ROP field
fast deletion
See RB$FDL mask in ROP field
format
See RFM field in FAB
index
locating
See FIND operation
longest
See LRL field in FAB
processing
reading
See GET operation
replacing
See UPDATE operation
size
See RSZ field in RAB
update existing
See RB$UIF mask in ROP field
writing
See PUT operation
Record access
See also Shared access
Record access block
See RAB field in RAB
Record access byte
initializing
Record access mode
Record access section of FOB
Record attribute
Record attribute byte
Record context
Record file address
See RFA
See RFA field in RAB
Record format
and file organizations
fixed-length
indexed files
relative files
RMSCNV utility
RMSDEF utility
sequential files
stream
undefined

RMS-11 Introduction 3-12
RMS-11 Introduction 3-11
RMS-11 Introduction 3-11

RMS-11 Introduction 3-7
RMS-11 User's Guide 5-2

RMS-11 Introduction 3-7
RMS-11 User's Guide 5-2, 5-6

RMS-11 Introduction 4-1, 4-3
RMS-11 User's Guide 1-15
MCR Operations 4-47

RMS-11 User's Guide 1-12

I/O Operations 2-9
RMS-11 Macros 4-4
I/O Operations 2-8
I/O Operations 2-6
I/O Operations 2-6
RMS-11 Macros 4-3

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Index-229

Introduction 3-1
User's Guide 1-11,
User's Guide 1-20,
Introduction 3-2
User's Guide 1-11,
User's Guide 6-1
User's Guide 4-2
Utilities 4-14
Utilities A-8
User's Guide 3-3
Introduction 3-4
User's Guide 1-11,
Introduction 3-4
User's Guide 1-11,

1-18
2-15
2-15

2-16
2-17

MASTER INDEX
Record format (Cont.)
variable-length
and medium
VFC
Record I/O
contrast to block I/O
data flow during
multiple buffered
multiple buffering
random access mode
sequential access mode
Record I/O operations
Record length
longest
See LRL field in FAB
maximum
'See MRL field in FAB
Record Management Services
See RMS-11
Record number
maximum
See MRN field in FAB
Record operation
See also Operation
Record operation macro
declaring
$DELETE
$FIND
$GET
$PUT
$TRUNCATE
$UPDATE
Record processing
Record reference vector
See RRV
Record size
indexed files
relative files
sequential files
UPDATE operation
Record stream
Record transfer mode
indexed files
locate mode
move mode
relative files
sequential files
Record type
R.FIX
R.SEQ
R.VAR
Record-oriented device

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Introduction 3-2
User's Guide 1-11, 2-15
User's Guide 2-15
Introduction 3-2
User's Guide 1-11, 2-16

I/O Operations 1-5
I/O Operations 1-3
I/O Operations 3-10
I/O Operations 1-6
I/O Operations 1-5
I/O Operations 1-5
I/O Operations 3-24

RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-9
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros
Macros
Macros
Macros
Macros
Macros
Macros
Macros

C-3
5-25
5-49, 5-51, 5-54
5-60, 5-63, 5-67
5-91, 5-~5
5-122
5-124
4-3

I/O Operations 2-6
RMS-11 User's Guide 1-18
RMS-11 User's Guide 6-1
RMS-11 User's Guide 4-2
RMS-11 User's Guide 3-2
RMS-11 User•s Guide 2-i6
RMS-11 Macros 4-3
RMS-11 Introduction 4-6
RMS-11 User's Guide 7-6
RMS-11 Introduction 4-6
RMS-11 Introduction 4-6
RMS-11 User's Guide 4-12
RMS-11 User's Guide 3-13
I/O Operations 2-5
I/O Operations 2-6
I/O Operations 2-6
Introduction 5-10 to 5-11,
Gloss-28

See also FB$REC mask in DEV field
Record-output characteristic
See RAT field in FAB
Record-output handling
RMS-11 User's Guide 1-19
RECORDS command
IOX
System Management 4-51

Index-230

MASTER INDEX
RECOVER qualifier
DCL
example
MCR
restoring files with
Recovery techniques
RCT
for disks
RED command
VMR
Redefining key
description of feature
keypad editing
keypad function
line editing
no keypad editing
repeat count
ways of
REDIRECT command
Basic MCR
command line format
error message
example
VMR
command line format
example
Redirecting
a spooled device
Redirection
Reentry
vector register
REF command
REF field in KEY block
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
Reference
search
Refreshing the screen (CTRL/W)
REG symbolic argument
Region
absolute
building precautions
mapping for
mapping of
specifying an
symbol definition file
allocation
diagram
of window block for
APR
specifying
assigning references
attaching to
building

EDT Editor 3-1
EDT Editor 4-4
EDT Editor 3-3 to 3-5
EDT Editor 4-6
EDT Editor 3-1
System Management 5-1
Writing I/O Driver 2-6
MCR Operations 3-144
System Management 10-33
EDT Editor 1-9
EDT Editor 5-54, 10-5
EDT Editor 10-1
EDT Editor 7-4, 10-2
EDT Editor 8-10, 10-1
EDT Editor 10-9
EDT Editor 10-1
MCR Operations 3-144
System Generation (llS) 2-2
MCR Operations 3-144
MCR Operations 3-144
MCR Operations 3-144
System Management 10-33
System Management 10-33
System Management 10-33
Executive 5-83
Command Language 5-16 to 5-18
ODT 5-3
EDT Editor 8-16
RMS-11 Macros 2-13
RMS-11 Macros 5-3
RMS-11 Macros 5-9, 5-18
RMS-11 Macros 5-30
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 6-67
RMS-11 Macros 5-73 to 5-74
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-90
ODT 2-8, 6-3
EDT Editor 5-8
PDP-11 MACR0-11 6-20 to 6-21
Executive 3-4
Task Builder 2-18
Task Builder 5-9
Task Builder 5-7
Task Builder 5-8
Task Builder 5-7
Task Builder 5-7
Task Builder 5-9
Task Builder 5-20
Task Builder 5-25
Task Builder 5-6
Task Builder 5-23
Executive 3-5
Index-231

MASTER INDEX
Region
building (Cont.)
a 1 inking task
and linking to a
interaction of /CO/LI/PI
switch
options
in an overlaid
options in an overlaid
use of /CO/LI/PI switch
with PAR option
common
definition block
descriptor
descriptor in overlay
dynamic

Task Builder 5-21 to 5-22
Task Builder 5-14, 5-17 to 5-18
Task Builder 5-3
Task Builder 5-10
Task Builder 5-11
Task Builder 5-3
Task Builder 5-2
Task Builder 2-19 to 2-20
Executive 3-6, 3-11 to 3-12
Task Builder B-21
Task Builder 3-20
Executive 3-5, 5-42
Task Builder 2-20, 5-40 to 5-43

building a task that creates
a
fixing
restrictions
ID

installing in RSX-llM
installing in RSX-llM-PLUS
library
linked to a region
linked with a region
1 inking to a
loading
restrictions
map
mapping of an absolute
mapping windows
memory-resident overlaid
building
example of building
number of
options for building
options for linking to
overlaid
autoload call overhead
autoload in
autoload vector
FTB and old libraries
global symbols in .STB file
I- and D-space task vectors
named program section
run-time support for
.STB file
partition
requirements
procedure for building a
program section in
protection
PSECT
building a linking task
relocatable
mapping
specifying
specifying APR for
.STB file for a
resident relocatable
resolving PSECT names
shareable
shared

Task Builder 5-40 to 5-43
System Management 10-18
System Management 10-18
Executive 3-5
Task Builder 5-2 to 5-3, 5-20
Task Builder 5-2 to 5-3, 5-20
Task Builder 2-20
Task Builder 5-26
Task Builder 5-25
Task Builder 5-13 to 5-14, 5-26
System Management 10-18
Task Builder 5-19
Task Builder 5-7
Executive 3-7
Task Builder 5-9
Task Builder 5-9
Task Builder 5-10
Task Builder 5-17
Task Builder 5-17 to 5-18
Task Builder 5-14
Task Builder 5-9
Task Builder 5-13
Task Builder 5-13
Task Builder 5-11
Task Builder 5-13
Task Builder 5-11
Task Builder 5-11
Task Builder 5-13
Task Builder 5-12 to 5-13
Task Builder 5-11
Task Builder 5-28
Task Builder 5-2
Task Builder 5-17 to 5-18
Task Builder 5-7
Executive 3-8
Task Builder 5-23
Task Builder 5-5
Task Builder 5-5
Task Builder 5-5
Task Builder 5-6
Task Builder 5-9, 5-14, 5-16
Task Builder 5-5
Task Builder 5-39 to 5-40
Executive 3-5
Executive 3-5
Task Builder 2-20, 5-1

Index-232

MASTER INDEX
Region
shared (Cont.)
allocation of window block
for
autoload vectors in
defined
initializing window block for
installing
partition requirement
resolving PSECT names
restrictions for ov~rlaid
symbol definition file
use of /CO/LI/PI switches
windows in
size of
specifying
as position independent
partition for
static common
.STB file
for an absolute
using /CO/LI/PI switches
symbol definition file
task
task building options
type of access to
use of /CO/LI/PI switches
window
Region Definition Block
See also RDB
Region ID
determining
Region status word
Register
A

address mode
argument
B

breakpoint
address
instruction
proceed count

c
cache control
constant
CPU error
D

def erred address mode
definition
control
default
device LUN
directive status word
E

expression
F

format
G

general
H

high memory limit
I

indicator
instruction

Task Buiider 5-i4
Task Builder 5-12
Task Builder 5-1
Task Builder 5-14
Task Builder 5-16
Task Builder 5-3
Task Builder 5-16
Task Builder 5-12
Task Builder 5-16
Task Builder 5-9
Task Builder 5-14
Task Builder 5-17
Task Builder 10-9, 10-31
Task Builder 5-28
Executive 3-4
Task Builder 5-4 to 5-5, 5-14,
5-16
Task Builder 5-7, 5-9, 5-12
Task Builder 5-4
Task Builder 5-9
Executive 3-4
Task Builder 2-18 to 2-20
Task Builder 5-13 to 5-14
Task Builder 5-14
Task Builder 5-5
Task Builder 5-15, 5-25
Executive 5-16 to 5-17, 5-42 to
5-43, 5-56 to 5-57
Executive 5-16
Executive 5-42, 5-56
ODT 2-6, 5-1
ODT 2-6, 5-3, 6-2
PDP-11 MACR0-11 5-2
ODT 6-2
ODT 2-6, 5-4
Program Development 5-6
ODT 2-6, 3-1 to 3-2, 5-4
ODT 5-4
ODT 3-3, 5-4
ODT 2-6, 5-3
Crash Dump Analyzer 3-2
ODT 2-6
Crash Dump Analyzer 3-2
ODT 2-7, 5-4, 6-2
PDP-11 MACR0-11 5-3
PDP-11 MACR0-11 6-20 to 6-21
PDP-11 MACR0-11 3-10
ODT 2-7, 5-4, 6-2
ODT 2-6, 5-3
ODT 2-7, 5-4
PDP-11 MACR0-11 5-2
ODT 2-6, 5-3
ODT 2-6
ODT 2-7, 5-4
ODT 5-2
ODT 2-6, 5-3, 6-1
ODT 2-6, 6-1
ODT 2-7, 5-4
ODT 2-8
ODT 2-7

Index-233

MASTER INDEX
Register (Cont.)
internal
L

low memory limit
M

memory limit
memory management
memory operation
memory system error
page address
page descriptor
percent sign in expression
proceed count
processor status
Q

quantity
R

reentry vector
relocation

s
search argument
search limit
search mask
SST stack content
SST vector
symbol
term indicator
Unibus mapping

w
x

Register handling
control swapping
save all registers ($SAVAL)
save registers 0-2 ($SAVVR}
save registers 1-5 (.SAVRl)
save registers 3-5 ($SAVRG)
Register indicator
C register
current location (.)
Q register
Register report
Register set
REGISTER DEFINITIONS argument
ReinsertTng deleted text
keypad editing
line editing (MOVE)
nokeypad editing

ODT 5-2
ODT 2-6, 5-3, 6-1
ODT 2-6, 6-1
ODT 2-6, 5-3, 6-2
ODT 5-3
Crash Dump Analyzer .3-2
ODT 6-1
Crash Dump Analyzer 3-2
Crash Dump Analyzer 3-2
Crash Dump Analyzer 3-2
PDP-11 MACR0-11 5-2
ODT 2-7
ODT 2-6, 5-3
ODT 2-6, 4-1, 5-3, 7-2
ODT 2-6, 5-3
ODT 2-7, 5-5 to 5-6
ODT 2-6, 5-3, 5-7
ODT 2-7, 5-5 to 5-6
Program Development 5-2 to 5-4
ODT 2-6, 5-3
ODT 2-6, 6-2
ODT 5-3
ODT 2-6, 6-2
ODT 2-7, 5-4
ODT 2-7, 5-5
PDP-11 MACR0-11 3-10
PDP-11 MACR0-11 3-2
Crash Dump Analyzer 3-2
ODT 2-7, 5-5
ODT 2-6, 5-3
ODT 2-6, 5-3, 5-7
System Library 2-2
System Library 2-2
System Library 2-4
System Library 2-5
System Library 2-3
ODT 2-3, 7-3
ODT 2-3
ODT 2-3, 2-5
ODT 2-3
Error Logging 3-18
ODT 5-4
PDP-11 MACR0-11 8-10
EDT Editor 2-12, 2-17, 5-25 to
5-36
EDT Edi tor 7-11
EDT Editor 2-~l, 8-15, 8-24 to

8-25
REL argument to ORG$ macro
REL symbolic argument
Relative
address
branch location
Relative address mode
assemble as absolute
Relative deferred address mode
Relative file organization
See also FB$REL code
access declarations
allocation
DEQ
initial
and remote access

RMS-11 Macros 2-3
PDP-11 MACR0-11 6-42
ODT 2-2
ODT 2-6, 4-5
PDP-11 MACR0-11 5-8
PDP-11 MACR0-11 6-19
PDP-11 MACR0-11 5-9
RMS-11 Introduction 3-5
RMS-11 User's Guide 1-4, 1-11
RMS-11 User's Guide 4-6
RMS-11 User's Guide 4-4
RMS-11 User's Guide 4-3
RMS-11 User's Guide B-3
Index-234

MASTER INDEX
Relative file organization
(Cont.)
asynchronous operations
buckets
cell
cells
CONNECT operation
contiguity
declaring with ORG$ macro
deferred write
DELETE operation
design
allocation
bucket size
MRN

record format
directory operations
DISCONNECT operation
file operations
FIND operation
FLUSH operation
GET operation
I/O techniques
MRN
multiple access streams
multiple buffers
prologue
PUT operation
random access
by key
by RFA
record operations
record size
record transfer modes
move mode
REWIND operation
RRN
sequential access
shared access
block access
record access
sharing declarations
stream operations
structure
conceptual
physical
UPDATE operation
Relative record number
See BKT field in RAB
See RRN
RELEASE command
format
entry number
job name
RELEASE/ENTRY command
RELEASE/JOB command
$RELOC routine
Relocatable
address
calculating
Relocatable expression
Relocatable program section
Relocatable region
See Region

RMS-11 User's Guide 4-14
RMS-11 User!s Guide 4-1
RMS-11 Introduction 3-5
RMS-11 User's Guide 4-1
RMS-11 User's Guide 4-7
RMS-11 User's Guide 4-4
RMS-11 Macros 2-3
RMS-11 User's Guide 4-14
RMS-11 User's Guide 4-7
RMS-11 User's Guide 4-1
RMS-11 User's Guide 4-3
RMS-11 User's Guide 4-2
RMS-11 User's Guide 4-5
RMS-11 User's Guide 4-2
RMS-11 User's Guide 4-15
RMS-11 User's Guide 4-8
RMS-11 User's Guide 4-15
RMS-11 User's Guide 4-8
RMS-11 User's Guide 4-10
RMS-11 User's Guide 4-10, 4-12 to
4-13
RMS-11 User's Guide 4-14
RMS-11 User's Guide 4-4
RMS-11 User's Guide 4-15
RMS-11 User's Guide 4-15
RMS-11 User's Guide 4-1
RMS-11 User's Guide 4-11 to 4-12
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 4-1
User's Guide 4-1
User's Guide 4-7
User's Guide 4-2
User's Guide 4-12
User's Guide 4-12
User's Guide 4-12
Introduction 3-6
User's Guide 4-1
User's Guide 4-6
User's Guide 4-6
User's Guide 4-6
User's Guide 4-6
User's Guide 4-7
User's Guide 4-1
User's Guide 4-1
User's Guide 4-1
user's Guide 4-12 to 4-13

Batch and Queue 2-23
Batch and Queue 2-23
Command Language 9-29
Command Language 9-29
Writing I/O Driver 5-25
Introduction 4-6, 4-9, Gloss-28
ODT 2-2, 5-6
ODT 2-9, 7-1
PDP-11 MACR0-11 3-17
PDP-11 MACR0-11 6-44 to 6-45

Index-235

MASTER INDEX
Relocation
bias
code
complex
entry
operation codes
directory command byte
directory record
entries
format
displaced
global
global
additive
global additive displaced
internal
displaced
library
resident
overview of
program section
additive
additive displaced
displaced
register
clear
set
resident library
Relocation register
REM command
VMR
.REM directive
/REMOTE keyword
SET command
VMR
Remote line
answer speed
disconnecting
Remote operation
P/OS
.REMOV
Removable and fixed, single
spindle disk
REMOVE command
command line format
error message
example
VMR
command line format
example
$REMOVE macro
RSTS/E
REMOVE operation
BDB requirement
I/O buffer requirement
IFAB requirement
remote access
$REMOVE macro
wildcard loop
nonselective

PDP-11 MACR0-11 2-2, 3-17 to 3-18,
4-1
Task Builder 2-4
PDP-11 MACR0-11 4-1
Task Builder A-22
Task Builder A-23
Task Builder A-22
Task Builder A-13
Task Builder A-12
Task Builder A-12 to A-13
Task Builder A-14
Task
Task
Task
Task
Task
Task

Builder
Builder
Builder
Builder
Builder
Builder

A-16
A-15
A-16
A-17
A-14
A-15

Task Builder A-23
PDP-11 MACR0-11 4-1
Task Builder A-19
Task Builder A-20
Task Builder A-21
Task Builder A-19
ODT 2-2, 2-7, 5-5 to 5-6
ODT 2-10, 5-6
ODT 2-10, 5-6
Task Builder A-23
Program Development 5-2 to 5-4
MCR Operations 3-146
System Management 10-34
PDP-11 MACR0-11 6-18
MCR Operations 3-193
System Management 10-57
I/O Drivers 2-41 to 2-42
I/O Drivers 2-42
I/O Drivers 2-23
RMS-11 Macros D-3
I/O Operations 4-16
I/O Drivers 5-4A
Command Language 7-34 to 7-35,
9-29
MCR Operations 3-146
MCR Operations 3-146
MCR Operations 3-146
MCR Operations 3-146
System Management 10-34
System Management 10-34
System Management 10-34
RMS-11 Macros 5-102
RMS-11 Macros D-4
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 Macros 3-6
RMS-11 Macros 2-8
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 User's Guide B-1
RMS-11 Macros 5-102
RMS-11 Useris Guide A-4
RMS-11 Macros 3-9 to 3-10
RMS-11 Macros 3-10
Index-236

MASTER INDEX
REMOVE operation
wildcard loop (Cont.)
selective
.RENAM
RENAME command
$RENAME macro
example
RENAME operation
BDB requirement
file versions
I/O buffer requirement
IFAB requirement
remote access
$RENAME macro
wildcard loop

nonselective
selective
RENEW command
EDI editor
RENew command
EDI editor
Renumbering line
See RESEQUENCE command
Reopen last location
Repeat block
indefinite
Repeat count
redefine key
REPEAT key
Repeating code block
REPLACE command
REPLACE function
Replacement block
RCT
primary
secondary
Report
interval
output frequency
Report control function
Report Generator
See RPT
Report switch
REPORTERRORS YES/NO command
IOX

Reporting
problems and errors
RMS-11
.REPT directive
Request and Pass Offspring
Information directive
REQUEST command
Request for next tape
terminating
Request Task directive
RES command
/RES switch
PRI command
RE SC OM
linking to region
option

RMS-11 Macros 3-11
IiO Operations 4-20
Introduction 3-8
Command Language 4-41 to 4-43,
9-30
RMS-11 Macros 5-108
RMS-11 Macros 7-15
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 Macros 3-6
RMS-11 Macros 2-8
RMS-11 User's Guide A-3
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 User's Guide B-1
RMS-11 Macros 5-108
RMS-11 User's Guide A-4
RMS-11 Macros 3-9 to 3-10
RMS-11 Macros 3-10
RMS-11 Macros 3-11
Program Development 2-15
Utilities 2-19, 2-43
ODT 4-3
PDP-11 MACR0-11 7-3, 7-16 to 7-19
EDT Editor 10-9
Command Language 3-14
PDP-11 MACR0-11 7-19
EDT Editor 2-27, 7-14
EDT Editor 5-40
System Management 5-2
System Management 5-4
System Management 5-4
System Management 4-60
Error Logging 5-22
Error Logging 3-6, 3-20
System Management 4-52
Release Notes 1-37
Release Notes 2-21
PDP-11 MACR0-11 7-19
Executive 5-129
Command Language 3-32, 9-30
I/O Operations G-11
Executive 5-133
MCR Operations 3-147
Batch and Queue 2-5
Task Builder 5-14
Task Builder 11-28 to 11-29
Index-237

MASTER INDEX
RESEQUENCE command
EDT
Reserved symbol
See also Permanent Symbol Table
for the Task Builder
$RESET
predefined syntax element in
MML
RESET function
Reset switch
Resident
common
name block data
library
name block data
relocation
memory
for TKB performance
overlay operator
enabling recognition of
region
using to reduce overhead
Resident data base
assembling
example
Resident driver
assembling
combination with data base
definition
example
incorporating
linking data base
rebuilding and reincorporating
after debugging
task-building
Resident in memory
Resident library
installing
RMS RES
Resident region
map file
including symbol definition
in
RES LIB
linking to region
option
Resource Accounting
Resource Monitoring Display
See RMD utility
REST
range specification
RESTART command
!OX

/RESTART job qualifier
SET QUEUE command
/RESTART qualifier
PRINT command
Restarting TKB option
.RESTORE directive
Restoring files
/RESTRICT subkeyword
CLI command
Restriction
BRU

EDT Editor 2-31, 2-36, 6-3, 7-15
Introduction 2-9 to 2-11
PDP-11 MACR0-11 2-3, 3-1, 3-7
Task Builder E-1
System Management 12-44
EDT Editor 5-8, 5-34
Error Logging 2-4, 2-7
Task Builder B-8
Task Builder B-8
Task Builder A-23
Task Builder F-3
Task·Builder 10-34
Task Builder F-4
Writing I/O Driver 3-12
Writing I/O Driver 6-1
Writing
Writing
Writing
Writing
Writing
Writing

I/O Driver
I/O Driver
I/O Driver
I/O Driver
I/O Driver
I/O Driver

3-13
3-1
1-1
6-1
3-13
3-3

Writing I/O Driver 3-29
Writing I/O Driver 3-14
Introduction 5-7, 5-9, Gloss-2
RMS-11 User's Guide 8-1, 8-8
MCR Operations 3-93
RMS-11 User's Guide 8-6, 8-9

Task Builder 10-26
Task Builder 5-14
Task Builder 11-28 to 11-29
Introduction 1-19

EDT Editor 6-10
System Management 4-53
Batch and Queue 2-21
Batch and Queue 2-5
Task Builder 11-4
PDP-11 MACR0-11 3-11, 6-47 to
6-48
RMS-11 User's Guide 1-10, 1-12
MCR Operations 3-39

Index-238

MASTER INDEX
Restriction
BRU (Cont.)
backup tapes
BRU64K

DCL as Catch-All Task
device
EDT V2.0
Error Logging
TKB
V4.l on-line SYSGEN
VMR support
on RSX-llS
Resultant string
See RSA field in NAM block
RESUME command
Basic MCR
command line format
error message
example
Resume Task directive
Resuming
program execution
task execution
RETRIES command
!OX
Retrieval pointer
allocating
in memory
on disk
Retrieval pointer count
See RTV field in FAB
Retrieval pointer format
/RETRY switch
BAD utility
Return
operation, from
RETURN command
EDI editor
.RETURN directive
format
Return from completion handler
RETURN key

closing location
ODT
displaying new line
EDI editor
entering text
EDI editor
exiting
PMT
terminating input
EDI editor
Return key command
$RETURN macro
RETURN statement
RETYPE command
EDI editor
Revector control table
RCT
status codes

Release Notes 1-35
Release Notes 1-23
Release Notes 1-28
Release Notes 1-16, 1-35
Release Notes 1-34
Release Notes 1-24
Release Notes 1-29
Release Notes 1-22
Release Notes 3-2
MCR Operations 3-147
System Generation {llS) 2-2
MCR Operations 3-147
MCR Operations 3-147
MCR Operations 3-147
Executive 5-139
ODT 3-2
ODT 1-5, 3-2
System Management 4-54
RMS-11 User's Guide 8-11
I/O Operations 2-15
RMS-11 User's Guide 8-11
RMS-11 User's Guide 8-11
I/O Operations F-5
Utilities 6-6
RMS-11 Macros 2-14
Utilities 2-19, 2-43
MCR Operations 4-48
MCR Operations 4-48
RMS-11 Macros 2-18
Introduction 1-3 to 1-4, 1-6 to
1-7, 1-10, 2-2, 2-5, 2-8,
2-16, Gloss-16 to Gloss-17
Command Language 3-2, 3-12, 3-17,
3-22
MCR Operations 2-15
Program Development 5-5, 5-8
Program Development 2-13
Program Development 2-9
System Management 13-8
Program Development 2-9 to 2-10,
2-18, 7-7
ODT 2-5, 4-2
RMS-11 Macros 2-18
Error Logging 4-31, 5-33
Utilities 2-19, 2-43
System Management 5-2
Index-239

MASTER INDEX
Reverse CUT
Reverse search
keypad editing
nokeypad editing
Reverse SELECT
Reverse video
/REVISED qualifier
BRU utility
Revising files with buffer
Revision date
See also RDT field in DAT block
RMSBCK utility
Revision number
See RVN field in DAT block
$REWIND macro
RSTS/E magtape device
REWIND operation
indexed files
record stream
relative files
$REWIND macro
sequential files
/REWIND qualifier
BRU utility
REWIND MAGTAPE
RMSDES utility
Rewinding
file on ANSI magtape
file open on terminal
RFll/RSll
RFA

EDT Editor 5-37
EDT
EDT
EDT
EDT

Editor
Edi tor
Editor
Editor

5-21
2-42
5-52
2-12, 5-33

Utilities 7-21
EDT Editor 2-1
RMS-11 Utilities 6-8
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros 5-114
Macros D-4
Introduction
User's Guide
User's Guide
Macros 4-9
User's Guide
Macros 5-114
User's Guide

4-4
1-15
7-6
4-12
3-11

Utilities 7-21
RMS-11 Utilities 2-34
I/O Operations 4-18
I/O Operations 4-18
I/O Drivers 5-1
RMS-11 Introduction 3-11, 3-15
RMS-11 User's Guide 1-12
RMS-11 User's Guide 4-1
RMS-11 User's Guide 3-2
RMS-11 Macros 4-6
RMS-11 Macros 5-7
RMS-11 Macros 5-50, 5-52, 5-54
RMS-11 Macros 5-61, 5-65, 5-67
RMS-11 Macros 6-115
RMS-11 Macros 5-93, 5-96
RMS-11 Macros 5-99, 5-101
RMS-11 Macros 6-129
RMS-11 Macros 5-128, 5-130

relative files
sequential files
RFA field in RAB
CONNECT operation
FIND operation
GET operation
off set
PUT operation
READ operation
summary
WRITE operation
RFA record access
See also RB$RFA code in RAC field
to relative files
RMS-11 User's Guide 4-1
to sequential files
RMS-11 User's Guide 3-2
RFM field in FAB
CREATE operation
RMS-11 Macros 5-11
RMS-11 Macros 6-23
off set
OPEN operation
RMS-11 Macros 5-78
summary
RMS-11 Macros 6-61
$$RGDS
reserved PSECT name
Task Builder E-3
RMS-11 Macros 4-7
RHB field in RAB
GET operation
RMS-11 Macros 5-61, 5-64, 5-68
RMS-11 Macros 6-115
off set
PUT operation
RMS-11 Macros 5-92, 5-96
summary
RMS-11 Macros 6-130
UPDATE operation
RMS-11 Macros 5-124
EDT Editor 2-11, 5-14
RIGHT function
Right-angle bracket
Command Language 3-15
I/O Drivers 5-3
RK05
I/O Drivers 5-3
RK06
RK06/07 kit
1600 bpi tape kit
Index-240

MASTER INDEX
RK06/07 kit
1600 bpi tape kit (Cont.)
copying
on-line
stand-alone
800 bpi tape kit
copying
on-line
stand-alone
disk kit
copying
on-line
stand-alone
RK07
RLOl/02 kit
1600 bpi tape kit
copying
on-line
stand-alone
800 bpi tape kit
copying
on-line
stand-alone
disk kit
copying
on-line
stand-alone
RL02
RL02 exercise

, , U\
....
System Generation I\..I.
..i.1"1}
System Generation (llM) 2-11
~c:

~-.J.j

System Generation (llM) 2-37
System Generation (llM) 2-14
System Generation (llM) 2-39
System Generation (llM) 2-17
I/O Drivers 5-3

System Generation (llM) 2-41
System Generation (llM) 2-20
System Generation (llM) 2-43
System Generation (llM) 2-24
System Generation (llM) 2-45
System Generation (llM) 2-28
I/O Drivers 5-3
System Management 4-9
System Library 7-4
RMS-11 Macros 2-20
Task Builder 5-56, 5-58

IOX

$RLCB (Release core block)
$RLCB system routine
RLSCT FORTRAN subroutine
/RM switch
PIP utility
RM02
RM02/03 module
RM02/03 notes module
RM02/03/05/80, RP07 tape kit
copying
on-line
stand-alone
RM03
RM05
RM80
RMD

Utilities 3-35
I/O Drivers 5-3
Error Logging 4-37 to 4-49
Error Logging 4-67 to 4-68
System Generation (llM) 2-32
System Generation (llM) 2-6
I/O Drivers 5-3
I/O Drivers 5-3
I/O Drivers 5-3
System Generation (llM) 4-60
Command Language 7-53, 7-55 to
7-57, 8-9 to 8-13, 9-38

altering
active task display from MCR
display from setup page
I/O counts
from setup page
memory display
from MCR
system statistics
from MCR
from setup page
task display
from setup page
command line
to install
to invoke
DEVICE command
display page
displaying
active task

System Management 6-9
System Management 6-7
System Management 6-12
System Management 6-8
System Management 6-8
System Management 6-128
System Management 6-128
System Management 6-9, 6-11
System Management
System Management
System Management
System Management

6-2
6-2
6-12
6-1

System Management 6-8

Index-241

MASTER INDEX
RMD
displaying {Cont.)
commands to alter task
commmands to alter I/O counts
help
I/O counts
memory
RSX-llM-PLUS only
system statistics
task header
error message
FREE command
I/O counts display
altering from MCR
installing
individual terminal
introduction to
invoking
at terminal
OWNER command
RATE command
running
on slaved terminal
setup page
TASK command
task header display
altering from MCR
task-build command file
modifying
using
individual terminal
RMD utility
RMDEMO
See RMD utility
RMS-11

System Management 6-11
System Management 6-12
System Management 6-3
System Management 6-12
System Management 6-4
System Management 6-11
System Management 6-12A
System Management 6-10
System Management 6-130
System Management 6-8
System Management 6-12A
System Management 6-2
System Management 6-2
System Management 6-1
System Management 6-2
System Management 6-2
System Management 6-9
System Management 6-8 to 6-9,
6-11 to 6-12A
System Management 6-2
System Management 6-1, 6-7
System Management 6-9, 6-11
System Management 6-11
System Management 6-12C
System Management 6-2
Introduction 5-9, Gloss-28

comparison with Vl.8
file sharing
files included in distribution
kit
installation
RLOl/02 and RK06/07
known problems
library
miscellaneous info
new features
clustering support
disk-overlaid
increased device independence
linking programs with RMSDAP
support
more usable block I/O
facilities
new file and directory
operations
random access to fixed-format
disk sequential files
remote file and record access
via DECnet
remote node specification
RMSDAP enviroments
sharing for relative and
indexed files

Introduction 5-12, Gloss-29
Command Language 4-22, 4-43 to
4-49, B-1
Release Notes 2-13
System Generation (llM) 4-23
Release Notes 2-17
Release Notes 2-19
Release Notes 2-19
System Generation (llM) 6-10
Release Notes 2-17
Program Development 1-9, 1-11
Release Notes 2-16
Release Notes 2-1
Release Notes 2-1
Release Notes 2-1
Release Notes 2-5
Release Notes 2-3
Release Notes 2-6
Release Notes 2-4
Release Notes 2-5
Release Notes 2-2
Release Notes 2-3
Release Notes 2-4
Release Notes 2-6

Index-242

MASTER INDEX
RMS-11
new features (Cont.)
subset library
-1-~~t,

'-Qwn

;n'1o.1""\.o.n~o.l"'\,...o.

...,, .. .....,.'-t"'-J..i.U...-i•"-'"-

Release Notes 2-1
Release Notes 2-1
Release Notes 2-4

C!11nni"'\rt-

._,,..,..i:'l:'.,,.,,;.., '-

Wildcarding
position of
in I/O hierarchy
problems fixed with V2.0
RMSINSTAL.CMD
startup command procedure
using VMR to create partitions
utility configurations
RMS-11 defaults
RMS-11 File Back-Up Utility
See RMSBCK
RMS-11 File Conversion Utility
See RMSCNV
RMS-11 File Definition Utility
See RMSDEF
RMS-11 File Design Utility
See RMSDES
RMS-11 File Display Utility
See RMSDSP
RMS-11 File Restoration Utility
See RMSRST
RMS-11 Indexed File Load Utility
See RMSIFL
RMS-11 Macro Programmer's Guide
technical changes
RMS-11 resident library
See RMSRES
RMS-11 User's Guide
technical changes
RMS-11 Utilities
technical changes
RMS-11 utilities
new features
RMSBCK

back-up file contents
back-up medium
/CD switch
command string
container file
data integrity checking
examples
global switches
HELP
/ID switch
indirect command file
input file switches
intersystem file transfer
invoking
magnetic tape
multi volume
messages
/[NO]QU switch
output file switches
processing
data integrity checking
explicit/implicit file-spec
extended diagnostic messages
summary listing

Writing I/O Driver 2-2
Release Notes 2-16
System Generation (llM) 6-10
Release Notes 2-19
System Generation (llM) 6-11
System Generation (llM) 5-19
Release Notes 2-20
RMS-11 User's Guide 2-2

Release Notes 2-11

Release Notes 2-9
Release Notes 2-12
Release Notes 2-7
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-12
RMS-11 Utilities 1-1, 3-3, 4-5,
5-1, 6-1, 7-1, 7-5, 7-9 to
7-10
RMS-11 Utilities 6-1
RMS-11 Utilities 6-3
RMS-11 Utilities 6-8 to 6-9
RMS-11 Utilities 6-2 to 6-3
RMS-11 Utilities 6-1
RMS-11 Utilities 6-6 to 6-7, 6-9
RMS-11 Utilities 6-10
RMS-11 Utilities 6-5
RMS-11 Utilities 6-4
RMS-11 Utilities 6-4 to 6-5
RMS-11 Utilities 6-2
RMS-11 Utilities 6-8
RMS-11 Utilities 1-2
RMS-11 Utilities 6-2
RMS-11 Utilities 6-7
RMS-11 Utilities 6-9
RMS-11 Utilities C-1
RMS-11 Utilities 6-5 to 6-7, 6-10
RMS-11 Utilities 6-6
RMS-11 Utilities 6-8
RMS-11 Utilities 6-9
RMS-11 Utilities 6-9
RMS-11 Utilities 6-10
RMS-11 Utilities 6-10

Index-243

MASTER INDEX
RMSBCK (Cont.)
prompt
query mode
/RA switch
/RC switch
/RD switch
/RW switch
/SL switch
/SU switch
summary listing
terminating
RM SC NV

/AP switch
ASCII stream files
/BL switch
block mode
/CA switch
command string
CTRL/Z
file terminator
/EO switch
examples
/FO switch
HELP
/ID switch
/IM switch
indirect command file
intersystem file transfer
invoking
key name
key of reference
/KN switch
/KR switch
/LO switch
/MA switch
mass-insertion mode
messages
/ML switch
network facilities
/PD switch
po.pulating files
processing
input file organization
output file organization
prompt
/SL switch
/SU switch
summary listing
supersession
terminating
/TR switch
/WF switch
RMSDEF
alignment
allocation
data
file
alternate key, definition

area definition
area numbers
block boundaries

RMS-11 Utilities 6-2
RMS-11 Utilities 6-5 to 6-7, 6-10
RMS-11 Utilities 6-6 to 6-7, 6-9
RMS-11 Utilities 6-7, 6-9
RMS-11 Utilities 6-8 to 6-9
RMS-11 Utilities 6-7
RMS-11 Utilities 6-6, 6-10
RMS-11 Utilities 6-7
RMS-11 Utilities 6-10
RMS-11 Utilities 6-2
Command Language 4-43 to 4-49,
B-1
RMS-11 Introduction 5-2
RMS-11 user's Guide 1-12
RMS-11 Utilities 1-1, 3-1, 4-1
RMS-11 Utilities 4-5, 4-7, 4-13,
4-15
RMS-11 Utilities 4-3, 4-8
RMS-11 Utilities 4-8
RMS-11 Utilities 4-1
RMS-11 Utilities 4-8
RMS-11 Utilities 4-3 to 4-4
RMS-11 Utilities 4-8
RMS-11 Utilities 4-8
RMS-11 Utilities 4-16
RMS-11 Utilities 4-9, 4-15
RMS-11 Utilities 4-5
RMS-11 Utilities 4-5, 4-9
RMS-11 Utilities 4-9
RMS-11 Utilities 4-4
RMS-11 Utilities 1-2, 4-1
RMS-11 Utilities 4-3
RMS-11 Utilities 4-10
RMS-11 Utilities 4-10
RMS-11 Utilities 4-10, 4-16
RMS-11 Utilities 4-10, 4-16
RMS-11 Utilities 4-10
RMS-11 Utilities 4-10
RMS-11 Utilities 4-10
RMS-11 Utilities C-1
RMS-11 Utilities 4-11
RMS-11 Utilities 4-1
RMS-11 Utilities 4-12
RMS-11 user's Guide 6-26 to 6-27
RMS-11 Utilities 4-14
RMS-11 Utilities 4-16
RMS-11 Utilities 4-15
RMS-11 Utilities 4-3
RMS-11 Utilities 4-12
RMS-11 Utilities 4-5, 4-7, 4-13,
4-15
RMS-11 Utilities 4-12
RMS-11 Utilities 4-13
RMS-11 Utilities 4-4
RMS-11 Utilities 4-13
RMS-11 Utilities 4-14
RMS-11 Utilities 1-1, A-1
RMS-11 Utilities A-14
RMS-11
RMS-11
RMS-11
Ri'iS-11
RMS-11
RMS-11
Index-244

Utilities A-16
Utilities A-14
Utilities A-11
Utilities A-13
Utilities A-16
Utilities A-9

MASTER INDEX
RMSDEF (Cont.)
bucket size
carriage control
command string
contiguity
default extension quantity
file creation
file organization
file specification
fill numbers
fixed control area
HELP
/ID switch
indirect command file

RMS-11 Utilities A-15
RMS-11 Utilities A-9
RMS-11 Utilities A-5
RMS-11 Utilities A-15
RMS-11 Utilities A-15
RMS-11 Utilities A-19
RMS-11 Utilities A-8
RMS-11 Utilities A-7
RMS-11 Utilities A-16
RMS-11 Utilities A-8
RMS-11 Utilities A-5
RMS-11 Utilities A-5
RMS-11 Utilities A-1 to A-2, A-5
to A-6, A-19
RMS-11 Utilities A-5
RMS-11 Utilities A-14
RMS-11 Utilities A-8, A-10
RMS-11 Utilities A-9
RMS-11 Utilities A-9
RMS-11 Utilities A-20
RMS-11 Utilities A-14
RMS-11 Utilities A-10
RMS-11 Utilities A-1
RMS-11 Utilities A-18
RMS-11 Utilities A-8
RMS-11 Utilities A-5
RMS-11 Introduction 5-1
RMS-11 User's Guide 1-12, 1-18
RMS-11 Utilities 1-1, 2-1, 4-2,
5-1

invoking
location
magnetic tape
maximum record number
maximum record size
messages
placement control
primary key, definition
processing
protection
record format
terminating
RMSDES

allocation
areas
areas
defining
and BUCKET SIZE attribute
and DATA AREA attribute
and INDEX AREA attribute
and LEVELl INDEX AREA
and SIZE attribute
by default
explicitly
defining by default
CREATE command
SET ALL command
defining explicitly
numbering
attributes
ALLOCATION (area section)
ALLOCATION (file section)
BLOCK SPAN
BUCKET SIZE (area section)
BUCKET-SIZE (file section)
CARRIAGE CONTROL
CHANGES clearing
clearing individual values
clearing sections
CLUSTER SIZE
CONTIGUOUS (area section)
CONTIGUOUS (file section)
CONTROL FIELD SIZE
DATA AREA
displaying
displaying individual values
displaying sections

RMS-11 Utilities 2-10, 2-25
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Index-245

Utilities 2-1, 2-42, B-1
Utilities 2-32
Utilities 2-40
Utilities 2-41
Utilities 2-41
Utilities 2-36
Utilities 2-43
Utilities 2-43
Utilities 2-17, 2-38
Utilities 2-8
Utilities 2-14
Utilities 2-17
Utilities 2-8, 2-28, 2-43
Utilities 2-29
Utilities 2-44
Utilities 2-31
Utilities 2-37
Utilities 2-43, 2-45
Utilities 2-32
Utilities 2-37
Utilities 2-40
Utilities 2-22, 2-25
Utilities 2-26
Utilities 2-26
Utilities 2-31
Utilities 2-46
Utilities 2-35
Utilities 2-37
Utilities 2-40
Utilities 2-40
Utilities 2-15, 2-26
Utilities 2-26
Utilities 2-27

MASTER INDEX
RMS DES
attributes (Cont.)
DUPLICATES
EXACT POSITIONING
EXTENSION (area section)
EXTENSION (file section)
FILE PLACEMENT
FORMAT
INDEX AREA
INDEX-FILL
informational
LEVELl INDEX AREA
MAGTAPE BLOCK SIZE
MAX RECORD NUMBER
NAME (file-section)
NAME (key section)
NULL KEY
NULL-VALUE
ORGANIZATION
OWNER
POSITION
PROTECTION
resetting
REWIND MAGTAPE
RMS-11
SEGO POSITION
SEGn-LENGTH
SEGn-POSITION
settTng
setting from data file
setting from description file
setting individual values
setting sections
SIZE
SOURCE
SUPERSEDE
TARGET
TYPE
bucket fill, size
bucket size
relative files
CLEAR command
defining areas by default

in indirect command file
PROTECTION attribute
with CREATE
with SAVE
clearing attributes
commands
CREATE command
defining areas by default
defining areas explicitly
INDEX AREA attribute
key numbering
LEVELl INDEX AREA attribute
setting attrTbutes
with GET
creating data files
CTRL/Z command
data file
creating
GET command
defaults
defining areas by default
CREATE command

RMS-11 Utilities 2-40, 2-42, 2-44
RMS-11 Utilities 2-47
RMS-11 Utilities 2-45
RMS-11 Utilities 2-32
RMS-11 Utilities 2-30
RMS-11 Utilities 2-36
RMS-11 Utilities 2-41
RMS-11 Utilities 2-41
RMS-11 Utilities 2-1, 2-17, 2-29
RMS-11 Utilities 2-41
RMS-11 Utilities 2-34
RMS-11 Utilities 2-34
RMS-11 Utilities 2-31
RMS-11 Utilities 2-38
RMS-11 Utilities 2-39
RMS-11 Utilities 2-39
RMS-11 Utilities 2-31
RMS-11 Utilities 2-34
RMS-11 Utilities 2-46
RMS-11 Utilities 2-33
RMS-11 Utilities 2-21
RMS-11 Utilities 2-34
RMS-11 Utilities 2-1, 2-17, 2-29
RMS-11 Utilities 2-42
RMS-11 Utilities 2-42
RMS-11 Utilities 2-42
RMS-11 Utilities 2-13
RMS-11 Utilities 2-25
RMS-11 Utilities 2-24
RMS-11 Utilities 2-21
RMS-11 Utilities 2-21
RMS-11 Utilities 2-36
RMS-11 Utilities 2-30
RMS-11 Utilities 2-35
RMS-11 Utilities 2-30
RMS-11 Utilities 2-38
RMS-11 User's Gu de 6-29
RMS-11 User's Gu de 6-22
RMS-11 User's Gu de 4-3
RMS-11 Utilities 2-6, 2-18, 2-25
to 2-26
RMS-11 Utilities 2-44
RMS-11 Utilities 2-4
RMS-11 Utilities 2-33
RMS-11 Utilities 2-8, 2-28
RMS-11 Utilities 2-27
RMS-11 Utilities 2-6
RMS-11 Utilities 2-4
RMS-11 Utilities 2-7, 2-18, 2-28,
2-31
RMS-11 Utilities 2-44
RMS-11 Utilities 2-43
RMS-11 Utilities 2-41
RMS-11 Utilities 2-38
RMS-11 Utilities 2-41
RMS-11 Utilities 2-21
RMS-11 Utilities 2-10, 2-25
RMS-11 Utilities 2-28
RMS-11 Utilities 2-2, 2-9, 2-18
RMS-11 Utilities 2-3, 2-17, 2-24
RMS-11 Utilities 2-3, 2-7, 2-28
RMS-11 Utilities 2-10
RMS-11 Utilities 2-21
RMS-11 Utilities 2-28

Index-246

MASTER INDEX
RMSDES (Cont.)
DEQ

RMS-11 User's Guide 3-5, 4-4,
6-26
RMS-11 Utilities 2-3: 2-17: 2-24
RMS-11 Utilities 2-10
RMS-11 Utilities 2-10
RMS-11 Utilities 2-27
RMS-11 Utilities 2-13
RMS-11 Utilities 2-1
RMS-11 Utilities 2-16
RMS-11 Utilities 2-1
RMS-11 Utilities 2-22
RMS-11 Utilities 2-9, 2-21
RMS-11 Utilities 2-47
RMS-11 Utilities 2-3, 2-9, 2-18,
2-27
RMS-11 Utilities 2-10, 2-17, 2-24
RMS-11 Utilities 2-33
RMS-11 Utilities 2-28
RMS-11 Utilities 2-11
RMS-11 Utilities 2-3
RMS-11 Utilities 2-4
RMS-11 User's Guide 3-4, 4-4,
6-26
RMS-11 Utilities 2-2
RMS-11 User's Guide 6-7

description file
EXIT command
GET command
SAVE command
saving the design
design buffer
using
design session
resuming
ESC command
examples
EXIT command
GET command
PROTECTION attribute
with SAVE
HELP command
indirect command file
comments
initial allocation
invoking
key segments
keys
numbering
magnetic tape
messages
MRN
multiple areas
multiple keys
placement control
prompt
conditional
QUIT command
SAVE command
setting attributes
saving the design
sections, design buffer
area section
file section
key section
key segments
record section
system section
SET command
allocation
defining areas by default
defining areas explicitly
INDEX AREA attribute
LEVELl INDEX AREA attribute
PROTECTION attribute
with GET
SHOW ALL command
defining areas by default
defining areas explicitly
setting attributes
SHOW command
allocation

RMS-11 Utilities 2-8, 2-28, 2-38
RMS-11 Utilities 2-34
RMS-11 Utilities 2-52
RMS-11 User's Guide 4-5
RMS-11 Utilities 2-7, 2-43
RMS-11 Utilities 2-7, 2-38
RMS-11 User's Guide 6-14
RMS-11 Utilities 2-2
RMS-11 Utilities 2-1, 2-13 to
2-15, 2-17, 2-21, 2-29
RMS-11 Utilities 2-2, 2-12, 2-18
RMS-11 Utilities 2-13, 2-18, 2-27
RMS-11 Utilities 2-21
RMS-11 Utilities 2-13, 2-22, 2-27
RMS-11 Utilities 2-1, 2-16, 2-29
RMS-11 Utilities 2-29, 2-42
RMS-11 Utilities 2-29, 2-31
RMS-11 Utilities 2-29, 2-38
RMS-11 Utilities 2-41
RMS-11 Utilities 2-29, 2-36
RMS-11 Utilities 2-29 to 2-30
RMS-11 Utilities 2-13, 2-17, 2-20,
2-33
RMS-11 Utilities 2-10
RMS-11 Utilities 2-17, 2-43
RMS-11 Utilities 2-43
RMS-11 Utilities 2-41
RMS-11 Utilities 2-41
RMS-11 Utilities 2-33
RMS-11 Utilities 2-25
RMS-11 Utilities 2-4
RMS-11 Utilities 2-17
RMS-11 Utilities 2-43
RMS-11 Utilities 2-21
RMS-11 Utilities 2-15, 2-18, 2-26
RMS-11 Utilities 2-10

RMS-11
with GET
SHOW ID command
terminating

IT~:,
.&. .; - U \..I. .L .I. \..I. Ci:>

,.,

.e.-.J.J

RMS-11 Utilities 2-25
RMS-11 Utilities 2-16
RMS-11 Utilities 2-2, 2-9, 2-12
Index-247

MASTER INDEX
RMSDES (Cont.)
version
RMSDSP

ANSI-standard tape
/BP switch
command string
container file
detailed display
display information
examples
/FU switch
HELP
/ID switch
indirect command file
intersystem file transfer
invoking
magtape allocation information
messages
mounting tapes
prompt
switches
terminating
RMS I FL

calculating file work space
command string
/DE switch
/ER switch
examples
global switch
HELP
/ID switch
indirect command file
input file switches
invoking
/KR switch
/LO switch
messages
/NOER switch
/NOSO switch
output file switches
/PD switch
populating files
processing
building alternate indexes
command string checking
loading output file
reading and sorting input
sorting alternate key files
summary
terminating
prompt
sort error codes
sort work files
switches
terminating
/TR switch
RMSLIB.OLB (Record Management
Services library)

RMS-11 Utilities 2-16
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-12, 1-19
RMS-11 Utilities 1-1, 5-1, 6-3,
7-5, 7-10
RMS-11 Utilities 5-3
RMS-11 Utilities 5-3 to 5-4
RMS-11 Utilities 5-2 to 5-3
RMS-11 Utilities 5-1, 5-3 to 5-4
RMS-11 Utilities 5-4
RMS-11 Utilities 5-1
RMS-11 Utilities 5-5
RMS-11 Utilities 5-2, 5-4
RMS-11 Utilities 5-3
RMS-11 Utilities 5-3, 5-5
RMS-11 Utilities 5-2
RMS-11 Utilities 1-2
RMS-11 Utilities 5-2
RMS-11 Utilities 5-2
RMS-11 Utilities C-1
RMS-11 Utilities 5-3
RMS-11 Utilities 5-2
RMS-11 Utilities 5-3 to 5-4
RMS-11 Utilities 5-2
RMS-11 Introduction 5-2
RMS-11 User's Guide 1-12
RMS-11 Utilities 1-1, 3-1, 4-1 to
4-2
RMS-11 Utilities 3-12
RMS-11 Utilities 3-2 to 3-3
RMS-11 Utilities 3-7, 3-10, 3-14
RMS-11 Utilities 3-5 to 3-6
RMS-11 Utilities 3-14
RMS-11 Utilities 3-5
RMS-11 Utilities 3-3
RMS-11 Utilities 3-3, 3-5
RMS-11 Utilities 3-2
RMS-11 Utilities 3-7
RMS-11 Utilities 3-2
RMS-11 Utilities 3-8 to 3-9
RMS-11 Utilities 3-6
RMS-11 Utilities C-1
RMS-11 Utilities 3-6
RMS-11 Utilities 3-8 to 3-10
RMS-11 Utilities 3-5
RMS-11 Utilities 3-6 to 3-7, 3-11
RMS-11 User's Guide 6-26 to 6-27
RMS-11 Utilities 3-9
RMS-11 Utilities 3-12
RMS-11 Utilities 3-9
RMS-11 Utilities 3-10
RMS-11 Utilities 3-9
RMS-11 Utilities 3-11
RMS-11 Utilities 3-1
RMS-11 Utilities 3-12
RMS-11 Utilities 3-2
RMS-11 Utilities D-1
RMS-11 Utilities 3-1, 3-7, 3-12
to 3-13
RMS-11 Utilities 3-3, 3-5
RMS-11 Utilities 3-2
RMS-11 Utilities 3-7, 3-11
Program Development 1-11

Index-248

MASTER INDEX
Command Language 6-41
Program Development 1-9
RMS-11 Macros 2-20
RMS-li Macros D-3

RMSMAC.MLB
RSTS/E
RMS RES
and I/O paging operations
and overlays
clustered
supervisor mode
task building
RMSRST

/BD switch
command string
data integrity checking
examples
/FR switch
global switches
HELP
/ID switch
indirect command file
input file switches
intersystem file transfer
/FR switch
version number conversion
invoking
messages
/[NO]CV switch
/[NO]QU switch
/OA switch
output file switches
processing
data integrity checking
explicit/implicit file-spec
extended diagnostic messages
restoration account
summary listing
prompt
query mode
/RA switch
/RC switch
/SE switch
/SL switch
/SU switch
summary listing
terminating
$RMSTAT macro
RMT
RO qualifier (MCR)
/RO switch
ZAP utility
RO symbolic argument
Root
in a co-tree
indexed files
null
in ODL
structure
overlay
.ROOT directive
.ROOT statement
allocation diagram
creating from

RMS-11 User's Guide 8-10
RMS-11 User's Guide 8-6, 8-9
RMS-11 User's Guide 8-7
RMS-11 User's Guide 8-7
RMS-11 User's Guide 8-6
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-12
RMS-11 Utilities 1-1, 4-2, 5-4,
6-1, 6-3, 6-8, 7-1
RMS=ll Utilities 7=8, 7=10
RMS-11 Utilities 7-2 to 7-3
RMS-11 Utilities 7-6, 7-8, 7-11
RMS-11 Utilities 7-12
RMS-11 Utilities 7-7
RMS-11 Utilities 7-5
RMS-11 Utilities 7-3
RMS-11 Utilities 7-3, 7-5
RMS-11 Utilities 7-2
RMS-11 Utilities 7-8
RMS-11 Utilities 1-2, 7-1, 7-10
RMS-11 Utilities 7-7
RMS-11 Utilities 7-5
RMS-11 Utilities 7-2
RMS-11 Utilities C-1
RMS-11 Utilities 7-5, 7-10
RMS-11 Utilities 7-6 to 7-8, 7-12
RMS-11 Utilities 7-9 to 7-10
RMS-11 Utilities 7-7
RMS-11 Utilities 7-9
RMS-11 Utilities 7-11
RMS-11 Utilities 7-10
RMS-11 Utilities 7-11
RMS-11 Utilities 7-10
RMS-11 Utilities 7-12
RMS-11 Utilities 7-2
RMS-11 Utilities 7-6 to 7-8, 7-11
RMS-11 Utilities 7-7, 7-11
RMS-11 Utilities 7-8, 7-11
RMS-11 Utilities 7-3, 7-9
RMS-11 Utilities 7-6, 7-12
RMS-11 Utilities 7-8
RMS-11 Utilities 7-12
RMS-11 Utilities 7-2
RMS-11 Macros C-3
System Management 11-2
EDT Editor 4-7
Task Builder 10-34
Utilities 15-2
PDP-11 MACR0-11 6-40
RMS-11 User's Guide 1-7
Task Builder 3-30
RMS-11 User's Guide 5-5
Task Builder 3-30
Task Builder 3-30
Task Builder 3-21
Task Builder 3-22
Task Builder 3-36

Index-249

MASTER INDEX
ROP field in RAB
CONNECT operation
DELETE operation
DISCONNECT operation
FIND operation
FLUSH operation
FREE operation
GET operation
NXTVOL operation
off set
PUT operation
READ operation
REWIND operation
SPACE operation
summary
RB$ASY mask
RB$EOF mask
RB$FDL mask
RB$KGE mask
RB$KGT mask
RB$LOA mask
RB$LOC mask
RB$MAS mask
RB$UIF mask
TRUNCATE operation
UPDATE operation
WRITE operation
Round-robin scheduler
Rounding
floating-po int
/RP switch
LBR utility
RP03
RP04
RP04/05/06 tape kit
copying
on-line
stand-alone
RP05
RP06
/RPA keyword
SET command
VMR
RPO!$
/RPRI keyword
ALTER command
%RPT
RPT
command line
input file
multiple qualifiers
report file
switches
universal library
/DA switch
Date switch
/DE switch
Device switch
multiple qualifiers
error log control file
error log file

RMS-11 Macros 4-1, 4-4 to 4-7
RMS-11 Macros 5-6 to 5-7
RMS-11 Macros 5-25
RMS-11 Macros 5-27
RMS-11 Macros 5-49, 5-51 to 5-52,
5-54
RMS-11 Macros 5-56
RMS-11 Macros 5-58
RMS-11 Macros 5-60 to 5-61, 5-63
to 5-64, 5-67 to 5-68
RMS-11 Macros 5-70
RMS-11 Macros 6-115
RMS-11 Macros 5-91 to 5-92, 5-95
to 5-96
RMS-11 Macros 5-98, 5-100
RMS-11 Macros 5-114
RMS-11 Macros 5-120
RMS-11 Macros 6-131
RMS-11 Macros 6-132
RMS-11 Macros·6-133
RMS-11 Macros 6-134
RMS-11 Macros 6-135
RMS-11 Macros 6-136
RMS-11 Macros 6-137
RMS-11 Macros 6-138
RMS-11 Macros 6-139
RMS-11 Macros 5-122
RMS-11 Macros 5-124
RMS-11 Macros 5-127, 5-129
Introduction 5-8, Gloss-29
PDP-11 MACR0-11 6-34
Utilities 10-23
I/O Drivers 5-1
I/O Drivers 5-1, 5-3
System Generation (llM) 2-32
System Generation (llM) 2-6
I/O Drivers 5-3
I/O Drivers 5-3
MCR Operations 3-195
System Management 10-58
Executive 5-129
MCR Operations 3-15
Error Logging 5-22
Error Logging 1-1
Error Logging 3-2
Error Logging 3-2
Error Logging 3-3
Error Logging 3-2
Error Logging 3-2
Error Logging 3-2
Error Logging 3-5, 3-8
Error Logging 3-5, 3-8
Error Logging 3-5, 3-8
Error Logging 3-5, 3-8
Error Logging 3-4
Error Logging 1-4
Error Logging 1-4

Error log packet

number
error log packets

Error Logging 3-1
Error Logging 1-4
Index-250

MASTER INDEX
RPT (Cont.)
error type definition
/F switch
Format switch
brief report
full report
No report
Register report
information required
format selection
packet selection
interpreter
/P switch
Packet number switch
multiple qualifiers
/R switch
report information selection
Report switch
/SE switch
Serial number switch
multiple qualifiers
subswitch summary
switch summary
/T switch
Type switch
multiple qualifiers
/V switch
Volume label switch
/W switch
Width switch
RPT control function
RPT default command line
Date switch
Device switch
Format switch
Packet switch
Type switch
Width switch
RPT default file specification
RPT report switch
format packet
select packet
RPTBLD.BLD file
$RQCB (Request core blocks)
$RQCB system routine
RQST$
$RQVCB (Request virtual core
block)
RREF$
RRN
See also BKT field in RAB
relative files
sequential files
RRV
/RS keyword
MOUNT command
/RS switch
FLX utility
SLP utility
RS03
RS04
RSA field in NAM block
off set
SEARCH operation
summary
RSD

Error Logging 1-5
Error Logging 3-5, 3-11
Error Logging 3-5, 3-11
Error Logging 3-11
Error Logging 3-15
Error Logging 3-19
Error Logging 3-18
Error Logging 3-2
Error Logging 3-2
Error Logging 3-2
Error Logging 5-1
Error Logging 3-5, 3-8
Error Logging 3-5, 3-8
Error Logging 3-4
Error Logging 3-6, 3-20
Error Logging 1-4 to 1-5
Error Logging 3-6, 3-20
Error Logging 3-6, 3-9
Error Logging 3-6, 3-9
Error Logging 3-4
Error Logging 3-5
Error Logging 3-5
Error Logging 3-7, 3-9
Error Logging 3-7, 3-9
Error Logging 3-4
Error Logging 3-7, 3-10
Error Logging 3-7, 3-10
Error Logging 3-7, 3-21
Error Logging 3-7, 3-21
Error Logging 5-21
Error Logging 3-4
Error Logging 3-4
Error Logging 3-4
Error Logging 3-4
Error Logging 3-4
Error Logging 3-4
Error Logging 3-4
Error Logging 3-3
Error Logging 3-5
Error Logging 3-5
Error Logging 3-2
System Library 7-3
RMS-11 Macros 2-20
Executive 5-133
System Library 8-20
Executive 5-136
RMS-11 Introduction 3-5, 3-12,
3-14 to 3-15
RMS-11 user's Guide 4-1
RMS-11 user's Guide 3-2
RMS-11 user's Guide 5-12, 5-16
MCR Operations 3-123
Utilities 4-4
Utilities 13-16
I/O Drivers 5-1
I/O Drivers 5-1
RMS-11 Macros 3-9
RMS-11 Macros 6-94
RMS-11 Macros 5-116
RMS-11 Macros 6-103
System Generation (llS) 2-22
Index-251

MASTER INDEX
RSDV05
building
size
RSDVlH
building
size
RSDV52
building
size
/RSI keyword
RUN command
VMR
RSL field in NAM block
CREATE operation
ENTER operation
ERASE operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
RSS field in NAM block
offset
SEARCH operation
summary
RSTS/E RMS-11
contrasted with PRO/RMS-11
contrasted with RSX-11 RMS-11
remote access
RSTS/E system prompts and CLI
RSUM$
RSX-llM system prompts and CLI
RSX-llM versus RSX-llM-PLUS
RSX-llM-PLUS versus RSX-llM
RSX-llM/M-PLUS DCL
RSX-llM/M-PLUS RMS-11
contrasted with PRO/RMS-11
contrasted with RSTS/E RMS-11
remote access
RSX-llS
fixing tasks with PLAS support
host hardware configuration
requirements
new features
SYSGEN
example
on RSX-llM-PLUS host system
on VAX/VMS host system
system generation
on RSX-llM-PLUS Vl.O host
System Generation and
Installation Guide
note to
VMR support restriction
RSXll. SYS
See Account file
<RSXllD> symbol
RSXllM.OLB
definition
RSXllM.STB
RSXllS. OLB
inserting
data base object module

System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation

(llS}
(llS}
(llS)
(llS)
(llS)
(llS)
(llS}
(llS)
(llS}

1-1, 2-1
4-9
1-3
1-1, 2-1
4-9
1-3
1-1, 2-1
4-9
1-3

MCR Operations 3-150
System Management 10-36
RMS-ll
RMS-11
RMS-ll
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros
Macros
Macros
Macros
Macros
Macros
Macros
Macros
Macros
Macros

5-21
5-38
5-43
6-94
5-81
5-87
5-105
5-112
5-116 to 5-ll 7
6-104

RMS-11 Macros 6-94
RMS-11 Macros 5-116
RMS-11 Macros 6-105
RMS-11 Macros D-1
RMS-11 Macros D-3
RMS-11 User's Guide B-3
EDT Editor 2-3
Executive 5-139
EDT Editor 2-3
Introduction 5-3, Gloss-3
Introduc.tion 5-3, Gloss-3
Command Language 1-19
RMS-11 Macros D-3
RMS-11 Macros D-3
RMS-11 User's Guide B-3
Release Notes 3-1
Release Notes 3-1
Release Notes 3-1
Release Notes 3-7
Release Notes 3-24
Release Notes 3-24
Release Notes 3-2
Release Notes 3-3
Release Notes 3-2
MCR Operations 4=10
System Generation (llM} 5-1
Crash Dump Analyzer 1-1, 2-9
System Generation (llS) 4-5

Index-252

MASTER INDEX
RSXllS.OLB
inserting {Cont.)
device driver
RSXBLD.CMD
definition
RSXMAC.SML

RSXMC.MAC
RSXTIME
RSZ field in RAB
GET operation
offset
PUT operation
READ operation
summary
UPDATE operation
WRITE operation
/RT switch
FLX utility
RT-11
device support
FLX utility
file copying
FLX utility
volume
deleting
FLX utility
directory listing
FLX utility
initializing
FLX utility
RT02
RT02-C
control function
$$RTQ
PSECT
reserved PSECT name
$$RTR
PSECT
reserved PSECT name
$$RTS
PSECT
reserved PSECT name
RTV field in FAB
CREATE operation
off set
OPEN operation
RSTS/E
summary
RUBOUT
line pr inter
RUN command

Basic MCR
command line format
error message
example
keyword
/CKP
/CMD
/EST

System Generation (llS) 4-5
System Generation (llS) 4-5
System Generation (llM) 5-1
Command Language 6-41
Executive 1-5
Program Development 1-5, 1-9 to
1-10, 2-7
System Generation {llS) 4-5
Error Logging 5-7
RMS-11 Macros 4-7, 4-13
RMS-11 Macros 5-61, 5-65, 5-68
RMS-11 Macros 6-115
RMS-11 Macros 5-92, 5-95
RMS-11 Macros 5-99, 5-101
RMS-11 Macros 6-140
RMS-11 Macros 5-124
RMS-11 Macros 5-127, 5-129
Utilities 4-4
Utilities 4-2
Utilities 4-3
Utilities 4-12
Utilities 4-10
Utilities 4-12
I/O Drivers 2-4A, 3-3
I/O Drivers 3-3
I/O Drivers 2-40A, 3-30
Task Builder 5-52 to 5-53
Task Builder E-3
Task Builder 5-52 to 5-53
Task Builder E-4
Task Builder 5-53
Task Builder E-4
RMS-11 Macros 5-13
RMS-11 Macros 6-23
RMS-11 Macros 5-75
RMS-11 Macros D-3
RMS-11 Macros 6-62
I/O Drivers 3-24
I/O Drivers 10-6
Introduction 3-11, 4-2, 4-9 to
4-10, 4-13, 5-5, Gloss-17
Command Language 7-1, 7-4 to 7-16,
7-26, 7-60, 9-30, 9-37
Program Development 4-7, 5-2, 7-6
MCR Operations 3-148
System Generation (llS) 2-2
MCR Operations 3-148 to 3-151
MCR Operations 3-156
MCR Operations 3-155
MCR Operations 3-152
MCR Operations 3-152
MCR Operations 3-152
Index-253

MASTER INDEX
RUN command
keyword {Cont.)
/INC
/!OP

/PAR
/PMD
/PRI
/RSI
/SLV
/TASK
/UIC
VMR
command line format
example
keyword
/RSI
/UIC
Run Task directive
RUN$
Run-time support
overlaid region
autoload
autoload call overhead
FTB and old libraries
named program sections
Running task
RUNTIME command

MCR Operations 3-152
MCR Operations 3-153
MCR Operations 3-153
MCR Operations 3-153
MCR Operations 3-154
MCR Operations 3-150
MCR Operations 3-154
MCR Operations 3-154
MCR Operations 3-148, 3-155
System Management 10-36
System Management 10-36 to 10-38
System Management 10-39
System Management 10-36
System Management 10-37
Executive 5-140
Executive 5-140
Task Builder 5-12 to 5-13
Task Builder 5-13
Task Builder 5-13
Task Builder 5-13
Task Builder 5-13
Introduction 4-2
System Management 4-55

!OX

RVB field in KEY block
DISPLAY operation
offset
OPEN operation
summary
RVN field in DAT block
DISPLAY operation
offset
OPEN operation
RSTS/E
summary
RVN field in NAM block
RSX-11
/RW switch
DMP utility
DSC utility
FLX utility
PIP utility
RMSBCK utility
RW symbolic argument
RXOl
RX02
RX50

RMS-11
RMS-11
RMS-11
RMS-11

Macros
Macros
Macros
Macros

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros 5-32
Macros 6-14
Macros 5-81
Macros D-4
Macros 6-21

5-31
6-68
5-80
6-91

RMS-11 Macros D-4
Utilities 11-7
Utilities 8-15
Utilities 4-8
Utilities 3-36
RMS-11 Utilities 6-7
PDP-11 MACR0-11 6-40
I/O Drivers 5-4
I/O Drivers 5-4
I/O Drivers 5-4A

s
S command
description
example
S register

Sample program
SAV symbolic argument
$SAVAL {Save all registers)
Save attribute
SAVE command
command line format
error message
example

ODT 2-10, 3-3
EDT Editor 8-16
EDT Editor 2-42
ODT 2-6, 5-3
I/O Operations D-1
PDP-11 MACR0-11 6-42
System Library 2-2
Task Builder 2-4
MCR Operations 3-157
MCR Operations 3-159
MCR Operations 3-160
MCR Operations 3-160
Index-254

MASTER INDEX
SAVE command (Cont.)
keyword
/MOU
/SF ILE
/WB
requirement
RMSDES utility
setting attributes
valid device
VMR
command line format
example
keyword
/BOOT
/DENS
SAve command
EDI editor
.SAVE directive
SAVE qualifier
line editing
QUIT
Saved answer file
See also Standard Function
System
aborted
creating
default name
definition
input
Phase I
Phase I I
naming conventions
output
Phase I
Phase II
purpose
restrictions
Saved answer files
using V4.0
Saved stack pointer
Saving edit
See also EXIT command
Saving the design
See also Description file
RMSDES utility
.SAVRl (Save registers 1-5)
$SAVRG (Save registers 3-5)
$SAVVR (Save registers 0-2)
/SB switch
DMP utility
PIP utility
.SBTTL directive
SC command
EDI editor
SCAA$.
/SCB
SCB
description
relationship of
with I/O control blocks
required field
role of
in I/O data structure
SCB field
S.BMSK
S.BMSV

MCR Operations 3-160
MCR Operations 3-160
MCR Operations 3-159
MCR Operations 3-158
RMS-11 Utilities 2-13, 2-18, 2-27
RMS-11 Utilities 2-21
MCR Operations 3-157
System Management 10-40
System Management 10-40
System Management 10-41
System Management 10-40
System Management 10-40
Utilities 2-44
PDP-11 MACR0-11 6-47 to 6-48
EDT Editor 7=14
EDT Editor 7-8
EDT Editor 3-2, 3-4

System Generation
System Generation
System Generation
System Generation

(llM)
(llM)
(llM)
(llM)

3-10
3-10
4-6
3-9

System Generation (llM) 4-5
System Generation (llM) 5-5
System Generation (llM) 3-10
System Generation
System Generation
System Generation
System Generation

(llM)
(llM}
(llM)
(llM)

4-6
5-6
3-10
3-10

Release Notes 1-22
Crash Dump Analyzer 3-20
EDT Editor 5-9

RMS-11
System
System
System

Utilities 2-22, 2-27
Library 2-5
Library 2-3
Library 2-4

Utilities 11-8
Utilities 3-37
PDP-11 MACR0-11 6-15 to 6-16
Program Development 2-6
Utilities 2-44
Executive 5-145
Crash Dump Analyzer 2-2
Writing I/O Driver 4-19
Writing I/O Driver 2-6
Writing I/O Driver 3-7
Writing I/O Driver 2-20
Writing I/O Driver 4-20
Writing I/O Driver 4-20
Index-255

MASTER INDEX
SCB field (Cont.)
S.CON
S.CSR
S.CTM
S.FRK
S.ITM
S.LHD
S.MPR
S.PKT
S.PRI
S.RCNT
S.ROFF
S.STS
S.VCT
SCBDF$
Scheduling
round-robin interval
highest priority
lowest priority
task
SCLI$
Scope
See Terminal, video
Scope-code
Scratch disk
Screen
refreshing
shifting image of
showing parameters of
width
Scroll
SCROLL key
VT52
Scrolling
/SD switch
PIP utility
SDAT$
SDRC$
SDRP$
/SE switch
RMSRST utility
Search
argument register
command
limit register
mask register
memory
setting direction of
showing parameters of
word or byte
SEARCH & CHANGE command
EDI editor
Search command
$SEARCH macro
example
SEARCH operation
BDB requirement
I/O buffer requirement
IFAB requirement
remote access
$SEARCH macro

Writing I/O Driver 3-7, 4-22
Writing I/O Driver 3-7, 4-22
Writing I/O Driver 4-21
Writing I/O Driver 3-7, 4-23
Writing I/O Driver 3-7, 4-21 to
4-22
Writing I/O Driver 3-7 to 3-8,
4-2, 4-20
Writing I/O Driver 3-7, 4-23, B-1
to B-2
Writing I/O Driver 4-23
Writing I/O Driver 3-7, 4-21
Writing I/O Driver 4-20
Writing I/O Driver 4-20
Writing I/O Driver 3-7, 4-22
Writing I/O Driver 3-7, 4-21
Crash Dump Analyzer B-38

System Generation (llM) 4-38
System Generation (llM) 4-39
System Generation (llM) 4-39
Command Language 7-12 to 7-15,
7-60, 9-30, 9-37
Executive 5-148
Task Builder 2-4, 2-7
Command Language 5-10 to 5-11
EDT Editor 5-8
EDT Editor 8-18
EDT Editor 9-17
EDT Editor 9-6
Introduction Gloss-29
Command Lan9uage 3-14
Introduction 1-17
EDT Editor 2-28
Utilities 3-37
Executive 5-150
Executive 5-152
Executive 5-155
Error Logging 3-6, 3-9
Task Builder 10-35
RMS-11 Utilities 7-3, 7-9
ODT 2-6, 5-3, 6-2
ODT 6-3
ODT 2-6, 5-3, 6-1
ODT 2-6, 5-3, 6-2
ODT 2-8, 2-10, 6-3
EDT Editor 2-42, 5-21, 8-5 to 8-6
EDT Editor 9-17
ODT 2-11, 6-3
Utilities 2-44
ODT 2-11
RMS-11 Macros 5-116
RMS-11 Macros 7-7, 7-15
RMS-11 Introduction 4-1
RMS-11 User's Guide 1-17
RMS-11 Macros 2-8
RMS-11 Macros 2-7
RMS-11 Macros 2-5
RMS-11 User's Guide B-1
RMS-11 Macros 5-116
Index-256

MASTER INDEX
SEARCH operation (Cont.)
wildcard loop
explicit
implicit
SEARCH statement
Search time
indexed files
Searching
text
EDT
Secondary file
appending data to
closing
opening
for reading

outputting text to
Secondary index data record
See SIDR
Secondary pool
Secondary pool dump
Secondary pool switch
Section
Phase I
Executive Options
Host Configuration
Peripheral Options
Setup
System Options
Target Configuration
Terminal Driver Options
Phase I I
Executive Task-Build
Loadable Driver Task-Build
Privileged Task-Build
Setup
System VMR
SECTION function
Section, design buffer
RMSDES utility
area section
file section
key section
key segments
record section
system section
Sector
See also Placement control
Seek
overlapped
SEGO POSITION
RMSDES utility
Segment
autoloadable
data
global symbol in
call
to up-tree
definition of a
descriptor
in overlay
limiting number
reducing overhead
loading
as part of co-tree
when called
making autoloadable
mapping

RMS-11 Macros 3-9
RMS-11 Macros 3-11
RMS-11 Macros 3-9 to 3-10
Error Logging 5-40
RMS-11 user's Guide 5-8
Introduction 2-13
MCR Operations 4-44
MCR Operations 4-29
MCR Operations 4-44
MCR Operations 4-45
MCR Operations 4-29
Introduction Gloss-29
Crash Dump Analyzer 3-45
Crash Dump Analyzer 2-5
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation

(llM)
(llM)
(llM)
(llM)
(llM)
(llM)
(llM)

4-22
4-20
4-64
4-3
4-56
4-10
4-46

System Generation lllM)
System Generation (llM)
System Generation (llM}
System Generation (llM)
System Generation (llM)
EDT Editor 5-20

5-8
5-9
5-12
5-4
5-14

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Utilities 2-1, 2-16, 2-29
Utilities 2-29, 2-42
Utilities 2-29, 2-31
Utilities 2-29, 2-38
Utilities 2-41
Utilities 2-29, 2-36
Utilities 2-29 to 2-30
Introduction 2-1

I/O Drivers 5-7
RMS-11 Utilities 2-42
Task Builder 4-7
Task Builder 4-4
Task Builder 3-10
Task Builder 4-6
Task Builder 3-1
Task Builder B-19
Task Builder 3-20
Task Builder F-4
Task Builder 4-2
Task Builder 4-4, 4-6
Task Builder 4-3
Task Builder 2-10
Index-257

MASTER INDEX
Segment
mapping (Cont.)
disk-resident
memory-resident
multiple
global symbol in
global symbol resolution
symbol resolution
name
applying autoload indicator
to
.FCTR directive argument
null
in ODL
overlay
arrangement
root structure
symbol processing
processing order
single
Segmented key
SEGn LENGTH
RMSDES utility
SEGn POSITION
RMSDES utility
SEL command
SEL key
SELECT command
!OX

SELECT function
example with CUT and PASTE
reverse
SELECT PRIMARY command
EDI editor
SELECT range
marking text with
Select recovery
magnetic tape
SELECT SECONDARY command
EDI editor
SELECT statement
SELTMl
Semicolon (;)
Send By Reference directive
Send Data directive
Send Data Request and Pass
Offspring Control Block
directive
SEND directive
enabling for your task
Send Message directive
Send, Request And Connect
directive
Send/Receive By Reference
directive
$SEP
predefined syntax element in
MML
Separating character
Separator
dot ( .)
Radix-50 (*)
semicolon (;)
SEQ argument to ORG$ macro
SEQ symbolic argument

Task Builder 2-11
Task Builder 2-12
Task Builder 3-5
Task Builder 3-16
Task Builder 3-17
Task Builder 3-16
Task Builder 4-3
Task Builder 3-25
Task Builder 3-30
Task Builder 3-15
Task Builder 3-21
Task Builder 3-17
Task Builder 3-17
Task Builder 3-4f 3-8
RMS-11 Introduction 3-10
RMS-11 user's Guide 6-7
RMS-11 Utilities 2-42
RMS-11 Utilities 2-42
EDT Editor 8-17
Command Language 3-12
System Management 4-56
EDT Editor 2-12, 5-33
EDT Editor 5-34
EDT Editor 5-52
Utilities 2-45
EDT Editor 2-12, 5-34
I/O Drivers 8-13
Utilities 2-46
Error Logging 5-34 to 5-35
Error Logging 4-4
ODT 2-5
Task Builder 1-8
Executive 5-188
Executive 5-150
Executive 5-155
Task Builder 10-35
Executive 5-162
Executive 5-152
System Generation (llM) 4-25
System Management 12-44
PDP-11 MACR0-11 3-3
ODT 2-5
ODT 2-5
ODT 2-5
RMS-11 Macros 2-3
PDP-11 MACR0-11 6-10

Index-258

MASTER INDEX
SEQUENCE qualifier
description
fixed line number
line editing
SEQUENCE NUMBERS argument
Sequencing line
See RESEQUENCE command
Sequential access
block
FIND
GET
PUT

record
to indexed files
to relative files
to sequential files
Sequential block access
See BKT field in RAB
Sequential device
See FB$SQD mask in DEV field
Sequential file organization
See also FB$SEQ code
access declarations
allocation
DEQ
initial
and remote access
asynchronous operations
cells
CONNECT operation
declaring with ORG$ macro
deferred write
design
allocation
contiguity
medium
record format
directory operations
DISCONNECT operation
end-of-block indicators
end-of-file
FCS-11 compatibility
file operations
FIND operation
FLUSH operation
GET operation
I/O techniques
MBC
multiple access streams
multiple buffers
PUT operation
random access
by key
by RFA
record operations
record size
record transfer modes
locate mode
move mode
REWIND operation
RRN

EDT Editor 6-3
EDT Editor 6-4
EDT Editor 7-8
PDP-11 MACR0-11 8-11
Introduction 5-12, Gloss-29
RMS-11 Introduction 2-4 to 2-5
RMS-11 User's Guide 1-7 to 1-8
RMS-11 Introduction 3-12
RMS-11 User's Guide 1-20
RMS-11 User's Guide 1-16
RMS-11 User's Guide 1-16
RMS-11 User;s Guide 1-16
RMS-11 Introduction 3-11
RMS-11 User's Guide 1-12
RMS-11 User's Guide 5-16
RMS-11 User's Guide 4-1
RMS-11 User's Guide 3-2

RMS-11 Introduction 3-4
RMS-11 User's Guide 1-3, 1-11
RMS-11 User's Guide 3-6
RMS-11 User's Guide 3-4
RMS-11 User's Guide 3-4
RMS-11 User's Guide B-3
RMS-11 User's Guide 3-14
RMS-11 User's Guide 3-2
RMS-11 User's Guide 3-7
RMS-11 Macros 2-3
RMS-11 User's Guide 3-14
RMS-11 User's Guide 3-1
RMS-11 User's Guide 3-4
RMS-11 User's Guide 3-5
RMS-11 User's Guide 3-3
RMS-11 User's Guide 3-3
RMS-11 User's Guide 3-15
RMS-11 User's Guide 3-7
RMS-11 User's Guide 3-2
RMS-11 User's Guide 3-2
RMS-11 User's Guide 3-2
RMS-11 User's Guide 3-15
RMS-11 User's Guide 3-7
RMS-11 User's Guide 3-9
RMS-11 User's Guide 3-9, 3-13 to
3-14
RMS-11 User's Guide 3-14
RMS-11 User's Guide 3-15
RMS-11 User's Guide 3-15
RMS-11 User's Guide 3-14
RMS-11 User's Guide 3-10, 3-13
User's Guide 3-2
User's Guide 3-2
User's Guide 3-7
User's Guide 3-2
User's Guide 3-13
User's Guide 3-14, 4-13
RMS-11 User's Guide 3-13 to 3-14
RMS-11 User's Guide 3-11
RMS-11 Introduction 3-5
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Index-259

MASTER INDEX
Sequential file organization
(Cont.)
sequential access
shared access
block access
record access
record structured files
with undefined records
sharing declarations
stream operations
structure
conceptual
physical
TRUNCATE operation
UPDATE operation
user-provided interlocks
Sequential record access
See RB$SEQ code in RAC field
Serial command processing
CLI
Serial number switch
Serial, nondisk device (RMSIFL)
Service routine
SST
SET
/PLC TL
establishing
pool limits
task priority
parameter defaults
SET and SHOW parameter
SET command
command line format
description
error message
function
function of
keyword
/ABAUD
/BRO
/BUF
/CLI
/CO LOG
/CRT
/DCL
/EBC
/ECHO
/ESCSEQ
/FOX

/FORMFEED
/HF ILL
/HHT
/HOLD
/LINES
/LOG ON
/LOWER
/MAIN
/MAXEXT
/MAXPKT
/MCR
/NETUIC
/PLCTL
/POOL
/PRIV
/PUB

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

User's Guide 3-2
User's Guide 3-5
user's Guide 3-6
User's Guide 3-6
user's Guide 3-6
User's Guide 3-6
User's Guide 3-6
User's Guide 3-7
User's Guide 3-1
user's Guide 3-2
User's Guide 3-1
User's Guide 3-12
User's Guide 3-12 to 3-14
User's Guide 2-7, 3-6

System Management 11-9
Error Logging 3-6, 3-9
RMS-11 Utilities 3-1, 3-12
Executive 2-5

System Management 13-2, 13-12 to
13-13
System Management 13-13
System Management 13-13
EDT Editor 9-1
Introduction 1-18
MCR Operations 3-167
MCR Operations 3-168
EDT Editor 1-9, 9-2
MCR Operations 3-209
EDT Editor 9-1
EDT Editor 9-1
MCR Operations 3-171
MCR Operations 3-172
MCR Operations 3-173
MCR Operations 3-174
MCR Operations 3-174
MCR Operations 3-174
MCR Operations 3-175
MCR Operations 3-176
MCR Operations 3-177
MCR Operations 3-178
MCR Operations 3-179
MCR Operations 3-180
MCR Operations 3-181
MCR Operations 3-181
MCR Operations 3-182
MCR Operations 3-184
MCR Operations 3-184
MCR Operations 3-184
MCR Operations 3-185
MCR Operations 3-187
MCR Operations 3-188
MCR Operations 3-189
MCR Operations 3-189
MCR Operations 3-190
MCR Operations 3-191
MCR Operations 3-191
MCR Operations 3-192

Index-260

MASTER INDEX
SET command
keyword {Cont.)
/REMOTE
/RPA
/SLAVE
/SPEED
/SUB
/SYSUIC
/TERM
/TOP
/TYPEAHEAD
/UIC
/VF ILL
/WCHK
/WRAP
list of
option
non privileged
privileged
RMSDES utility

MCR Operations 3-193
MCR Operations 3-195
MCR Operations 3-197
MCR Operations 3-198
MCR Operations 3-199
MCR Operations 3-200
MCR Operations 3-201
MCR Operations 3-202
MCR Operations 3-204
MCR Operations 3-205
MCR Operations 3-206
MCR Operations 3-207
MCR Operations 3-208
EDT Editor 9-1 to 9-2

allocation
defining areas by default
defining areas explicitly
INDEX AREA attribute
LEVELl INDEX AREA attribute
PROTECTION attribute
with GET
SET CASE
SET CURSOR
SET ENTITY
SET KEYPAD
SET LINES number
SET MODE
SET MODE CHANGE
SET MODE LINE
SET NOKEYPAD
SET NONUMBERS
SET NOQUIET
SET NOTAB
SET NOTRUNCATE
SET NOVERIFY
SET NOWRAP
SET NUMBERS
SET QUIET
SET SCREEN width
SET SEARCH
SET SEARCH BOUNDED
SET SEARCH END
SET SEARCH EXACT
SET SEARCH UNBOUNDED
SET TAB
SET TERMINAL
SET TRUNCATE
SET VERIFY
SET WRAP
VMR
command line format
example
keyword
/ABAUD
/BOT
/BRO
/BUF
/CRT
/EBC
/ECHO

MCR Operations 3-167
MCR Operations 3-167
RMS-11 Utilities 2-13, 2-17, 2-20,
2-33
RMS-11 Utilities 2-10
RMS-11 Utilities 2-17, 2-43
RMS-11 Utilities 2-43
RMS-11 Utilities 2-41
RMS-11 Utilities 2-41
RMS-11 Utilities 2-33
RMS-11 Utilities 2-25
EDT Editor 9-2
EDT Editor 9-3
EDT Editor 9-4
EDT Editor 2-44, 9-5
EDT Editor 9-5
EDT Editor 9-5
EDT Edi tor 9-5
EDT Edi tor 9-5
EDT Edi tor 2-36, 7-2, 8-1, 9-5
EDT Edi tor 9-6
EDT Editor 9-6
EDT Edi tor 9-8
EDT Edi tor 9-12
EDT Editor 9-13
EDT Edi tor 9-14
EDT Editor 9-6
EDT Edi tor 9-6
EDT Editor 9-6
EDT Editor 9-7
EDT Edi tor 9-7
EDT Edi tor 9-7
EDT Edi tor 9-7
EDT Editor 9-7
EDT Edi tor 9-8
EDT Edi tor 9-12
EDT Edi tor 9-12
EDT Editor 9-13
EDT Editor 5-50, 9-14
System Management 10-43
System Management 10-44
System Management 10-66
System Management 10-46
System Management 10-47
System Management 10-48
System Management 10-48
System Management 10-48
System Management 10-48
System Management 10-49

Index-261

MASTER INDEX
SET command
VMR
keyword (Cont.)
/ESCSEQ
/FOX
/FORMFEED
/HF ILL
/HHT
/LINES
/LOG ON
/LOWER
/MAIN
/MAXEXT
/NETUIC
/PLCTL
/POOL
/POOLSIZE
/PRIV
/PUB
/REMOTE
/RPA
/SLAVE
/SPEED
/SUB
/SYSUIC
/TERM
/TOP
/TYPEAHEAD
/UIC
/VF ILL
/WCHK
/WRAP
Set Command Line Interpreter
directive
SET DAYTIME command
SET DEBUG command
SET DEFAULT command
SET DEVICE command
Set Event Flag directive
SET GROUPFLAGS command
$SET macro
SET NODEBUG command
SET NOPARTITION command
parameter
SHOW parameter
SET PARTITION command

System Management 10-49
System Management 10-49
System Management 10-50
System Management 10-50
System Management 10-50
System Management 10-51
System Management 10-51
System Management 10-51
System Management 10-51
System Management 10-53
System Management 10-53
System Management 10-55
System Management 10-56
System Management 10-57
System Management 10-57
System Management 10-57
System Management 10-57
System Management 10-58
System Management 10-59
System Management 10-59
System Management 10-60
System Management 10-61
System Management 10-62
System Management 10-63
System Management 10-64
System Management 10-64
System Management 10-64
System Management 10-65
System Management 10-65
Executive 5-148
Command Language 2-1, 8-1, 9-31
Introduction 1-5, 4-2
Command Language 1-2, 1-12 to
1-13 I 2-7
Command Language 2-4, 4-77 to
4-78, 5-72 to 5-73, 9-31
Command Language 5-9, 5-74 to
5-76, 9-31
Executive 5-159
Command Language 6-91 to 6-92,
9-32
RMS-11 Macros 2-11
Command Language 1-2, 1-12 to
1-13, 2-7
Command Language 7-38 to 7-43,
9-32

SET

SET PRIORITY command
SET PROTECTION command
SET QUEUE command
example
file format
qualifiers
job format
qualifiers
SET QUEUE/ENTRY command
SET QUEUE/JOB command

EDT Editor 9-1
Command Language 7-38 to 7-43,
9-32
Command Language 7-59 to 7-60,
9-33
Introduction 5-6
Command Language 2-6, 4-79 to
4-82, 9-33
Batch and Queue 2-21
Batch and Queue 2-19
Batch and Queue 2-19
Command Language 9-33
Command Language 9-34
Index-262

MASTER INDEX
SET statement
SET SYSTEM command
Set System Time directive
SET SYSTEM/DIRECTORY command
SET TERMINAL command
SET TERMINAL/HOLD SCREEN command
SET TIME command .SETO directive
example
format
.SETF directive
example
format
SETF$
$SETGSA macro
.SETL directive
example
format
.SETN directive
example
format
.SETO directive
example
format
.SETS directive
example
format
.SETT directive
example
format
SETT IM
generating
Setting attributes (RMSDES)
See Attribute
Setting control characteristics
SET and SHOW
Setting tab
keypad editing
nokeypad editing
/SF switch
DMP utility
/SFILE keyword
SAVE command
SFPA$
/SG switch
$$SGDO
PSECT
reserved PSECT name
$$SGD1
reserved PSECT name
$$SGD2
PSECT
reserved PSECT name
SGNBLDDRV.CMD
SGNKLAB.CMD
SGNPARM.CMD
definition
description
question
SGNSTAND.CMD
/SH switch
/SHARE keyword
MOUNT command
Shareable device

Error Logging 5-31
Command Language 8-3 to 8-4, 9-34
Executive 5-195
command Language 2-6
Introduction 1-16, 1-18
Command Language 2-2 to 2-3, 3-33
to 3-42, 9-35
Command Language 3-14, 3-19
Command Language 2-1, 8-1, 9-31
MCR Operations 4-49
MCR Operations 4-50
MCR Operations 4-49
MCR Operations 4-48
MCR Operations 4-48
MCR Operations 4-48
Executive 5-159
RMS-11 Macros 2-18
MCR Operations 4-48
MCR Operations 4-48
MCR Operations 4-48
MCR Operations 4-49
MCR Operations 4-49
MCR Operations 4-49
MCR Operations 4-49
MCR Operations 4-50
MCR Operations 4-49
MCR Operations 4-50
MCR Operations 4-50
MCR Operations 4-50
MCR Operations 4-48
MCR Operations 4-48
MCR Operations 4-48
System Generation (llS) 2-1, 2-21
System Generation (llS) 4-8

EDT Editor 9-1
EDT Editor 5-53
EDT Editor 8-21
Utilities 11-8
MCR Operations 3-160
Executive 5-160
Task Builder 10-36
Task Builder 5-53
Task Builder E-4
Task Builder E-4
Task Builder 5-53
Task Builder E-4
System Generation (llM) 3-5
System Generation (llM) 3-5
System Generation (llM) 5-1
System Generation {llM) 7-2
System Generation (llM) 5-4
System Generation (llM) 3-11
Error Logging 2-4, 2-10 to 2-11
Task Builder 10-37
MCR Operations 3-124
Command Language 5-9, 5-13

Index-263

MASTER INDEX
Shareable task
Shareable volume
Shared access
See also Access sharing
See also SHR field in FAB
access declarations
read-only
read/write
and high-level languages
application design
consideration
bucket locking
deferred write
to relative files
multiple access streams
programming considerations
sharing declarations
no sharing
read-only
read/write
user-provided interlocks
system protection codes
to indexed files
block access
record access
to relative files
block access
record access
to sequential files
record structured
with undefined records
Shared device
Shared file access
OPEN$R
OPNS$A
OPNS$R
OPNS$U
OPNS$W
Permitted second access
Shared region
See Region
Sharing
See Shared access
Sharing code or data
Sharing declaration
indexed files
no sharing
read-only
read/write
relative files
sequential files
user-provided interlocks
SHF
algorithms
first pass
second pass
conventions
installation of
monitoring with RMD
overhead
performance
removal of
shuffling
dynamic common regions
fixed tasks
partition sections

Co111JDand Language 6-73
Command Language 5-31, 5-38
RMS-11 Introduction 2-4
RMS-11 User's Guide 1-17
RMS-11 User's Guide 2-6
RMS-11 User's Guide 2-6
RMS-11 User's Guide 2-6
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-5
RMS-11 User's Guide 2-8
RMS-11 User's Guide 4-14
RMS-11 User's Guide 2-9 to 2-10
RMS-11 User's Guide 2-10
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-5
RMS-11 User's Guide 7-1
RMS-11 User's Guide 7-1
RMS-11 User's Guide 7-1
RMS-11 User's Guide 4-6
RMS-11 User's Guide 4-6
RMS-11 User's Guide 4-6
RMS-11 User's Guide 3-5
RMS-11 User's Guide 3-6
RMS-11 User's Guide 3-6
Command Language 5-13
I/O Operations 1-9
I/O Operations 1-9
I/O Operations 1-9
I/O Operations 1-9
I/O Operations 1-9
I/O Operations 1-9
Task Builder 5-1

PDP-11 MACR0-11 6-45
RMS-11 User's Guide 2-7
RMS-11 User's Guide 7-1
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-7
RMS-11 User's Guide 2-7
RMS-11 User's Guide 4-6
RMS-11 User's Guide 3-6
RMS-11 User's Guide 2-7
System Management 14-5
System Management 14-6
System Management 14-1
System Management 14-4
System Management 14-4
System Management 14-4
System Management 14-4
System Management 14-5
System Management 14-5
System Management 14-5
System Management 14-5
Index-264

MASTER INDEX
SHF
shuffling (Cont.)
static common regions
size
$SHFCT
changing contents
$SHFTM
SHIFT key
SHL command
Short forms
DCL
Shortening
command
SHOW ALL command
RMSDES utility
defining areas by default
defining areas explicitly
SHOW ASSIGNMENTS command
SHOW CLOCK QUEUE command
SHOW command
description
function of
list of
RMSDES utility
allocation
PROTECTION attribute
SHOW ALL
setting attributes
with GET
SHOW BUFFER
SHOW CASE
SHOW CURSOR
SHOW ENTITY
SHOW KEY
SHOW SCREEN
SHOW SEARCH
SHOW TERMINAL
SHOW VERSION
SHOW DAYTIME command
SHOW DEFAULT command
SHOW DEVICES command
Show devices switch
SHOW GROUPFLAGS command
SHOW ID command
RMSDES utility
/SHOW keyword
CL! command
SHOW LIBRARY command
SHOW MEMORY command
SHOW parameter
SET parameter
SHOW PARTITIONS command
SHOW PROCESSOR command
format
/SHOW qualifier

System Management 14-5
System Management 14-4
System Management 14-4
System Management 14-4
Introduction 1-9
Command Language 3-14
EDT Editor 8-18
Command Language 1-7 to 1-8, 9-1
Introduction 1-12, 2-4
RMS-11 Utilities 2-17
RMS-11 Utilities 2-43
Command Language 2-4, 5-72 to
5-73, 9-36
Command Language 7-60, 9-37
Introduction 1-11
EDT Editor 1-9, 9-15
EDT Editor 9-1
EDT Editor 9-1 to 9-2
RMS-11 Utilities 2-15, 2-18, 2-26
RMS-11 Utilities 2-10
RMS-11 Utilities 2-33
RMS-11 Utilities 2-4
RMS-11 Utilities 2-21
RMS-11 Utilities 2-25
EDT Editor 2-34, 6-5, 7-2, 9-15
EDT Editor 9-15
EDT Editor 9-16
EDT Editor 9-16
EDT Editor 9-16
EDT Editor 9-17
EDT Editor 9-17
EDT Editor 9-17
EDT Editor 9-17
Command Language 2-1 to 2-2, 8-2,
9-37
Introduction 1-15
Command Language 2-4, 3-2, 4-79,
9-37
Introduction 3-8, 5-10
Command Language 2-3, 5-4, 5-77
to 5-80, 9-37
Crash Dump Analyzer 2-3
Command Language 6-92, 9-38
RMS-11 Utilities 2-16
MCR Operations 3-39
Command Language 8-7
Introduction 5-8 to 5-9
Command Language 2-2, 8-9 to 8-13,
9-38
EDT Editor 9-1
Command Language 7-43 to 7-45,
9-38
Command Language 2-4, 9-39
Batch and Queue 2-18
PDP-11 MACR0-11 8-11

Index-265

MASTER INDEX
SHOW QUEUE command
batch queue
display
format
print queue
qualifiers
SHOW QUEUE display
SHOW QUEUE/FULL command
/Show switch
Show switch
SHOW SYSTEM command
SHOW SYSTEM/DIRECTORY command
SHOW TASK command
SHOW TASK/LOGICAL UNITS command
SHOW TASK:taskname/DYNAMIC
command
SHOW TASKS
SHOW TASKS command
SHOW TASKS/ACTIVE command
SHOW TASKS/ACTIVE/DYNAMIC command
SHOW TASKS/INSTALLED command
SHOW TERMINAL command
SHOW TIME command
SHOW USERS command
SHR command
SHR field in FAB
CREATE operation
offset
OPEN operation
READ operation
summary
WRITE operation
Shuffler
See SHF
Shuffler support
SHUTUP
completion notification
deallocating
checkpoint space
dismounting
devices
halting
processor
invoking
logging off
logged-in terminals
logins
disabling
enabling
prerequisites
redirecting
console terminal
shutdown
RSX-llM system

Introduction 6-2
Batch and Queue 2-14
Command Language 2-3 to 2-4, 9-39
Batch and Queue 1-9
Batch and Queue 2-16 to 2-17
Batch and Queue 2-15
Batch and Queue 1-9
Batch and Queue 2-15
Batch and Queue 1-10
Command Language 2-4
Error Logging 2-10 to 2-11
Error Logging 2-4
Command Language 8-5 to 8-7, 9-40
Command Language 2-7
Command Language 9-40
Command Language 7-57 to 7-58
Command Language 7-53 to 7-54,
9-40
Command Language 7-45
Introduction 1-20, 4-13
Command Language 2-5
Command Language 2-5, 3-2, 7-46
to 7-50, 9-40
Command Language 7-55 to 7-57,
9-40
Command Language 2-5, 7-51 to
7-53, 9-40
Introduction 1-18
Command Language 2-2 to 2-3, 3-43
to 3-54, 9-41 to 9-42
Introduction 1-11
Command Language 2-1 to 2-2, 8-2,
9-37
Introduction 1-19
Command Language 2-5, 8-7 to 8-8,
9-42
EDT Editor 8-18
RMS-11 Macros 5-14
RMS-11 Macros 6-22
RMS-11 Macros 5-75
RMS-11 Macros 5-99, 5-101
RMS-11 Macros 6-63
RMS-11 Macros 5-127, 5-129
System Generation (llM) 4-34
System Management 8-3
System Management 8-4
System Management 8-4
System Management 8-4
System Management 8-1
System Management 8-4
System Management 8-2 to 8-3
System Management 8-3
System Management 8-1
System Management 8-4
System Management 8-4 to 8-6

Index-266

MASTER INDEX
SHUTUP (Cont.)
SHUTUP.CMD
sub~itting

System Management 8-1, 8-3
System Management 8-3 to 8-4

to Indirect

stopping
Console Logger
ERR LOG
Queue Manager
task-build file
terminating
warning message
SHUTUP.CMD
example
installing
tasks
overview
relationship to SHUTUP task
submitting to Indirect
timeout interval

System Management 8-4
System Management 8-4
System Management 8-4
System Management 8-3
System Management 8-2
System Management 8-2
System Management 8-4
System Management 8-1, 8-3
System Management 8-3
System Management 8-3
System Management 8-3 to 8-4
System Management 8-3
RMS-11 User's Guide 5-5, 7-9
RMS-11 User's Guide 6-10
RMS-11 User's Guide 6-8 to 6-9
Error Logging 5-40 to 5-41
Error Logging 5-41

SIDR

changeable keys
duplicate keys
SIGNAL statement
SIGNAL STOP statement
Signalling
deinition
Significant event
list of
Simulating a system failure
Single ASCII character indicator
Single buffering
versus multiple buffering
Single line range
Single segment task
Single-directory device
See FB$SDI mask in DEV field
Single-precision routine
See Integer routine
SIP
building
command line
device
supported
error message
initiating
memory
maximum size
determining
restricted device
saving
restriction
operation
programming hint
size
terminating
SIZ field in KEY block
CREATE operation
DISPLAY operation
offset
OPEN operation
summary
SIZO field in KEY block
off set
SIZl field in KEY block
off set

Error Logging 5-40
Introduction 5-8, Gloss-30
Executive 2-1, 5-52
Executive 2-1, 5-222
EDT Editor 3-2
PDP-11 MACR0-11 3-3
I/O Operations 1-7
EDT Editor 6-7 to 6-8
Task Builder 3-8

System Generation (llS) 1-1, 2-1,
2-14
System Generation (llS) 4-8
System Generation (llS) 2-15
System Generation (llS) 2-15
System Generation (llS) 2-17
System Generation (llS) 2-15
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
RMS-11 Macros 5-18
RMS-11 Macros 5-31
RMS-11 Macros 6-68
RMS-11 Macros 5-80
RMS-11 Macros 6-92
RMS-11 Macros 6-68
RMS-11 Macros 6-68

Index-267

(llS)
(llS)
(llS)
(US)
(llS)
(llS)
(llS)
(llS)
(llS)

2-16
2-17
2-17
2-17
2-17
2-16
2-16
1-3
2-15

MASTER INDEX
SIZ2 field in KEY block
offset
SIZ3 field in KEY block
off set
SIZ4 field in KEY block
off set
SIZ5 field in KEY block
off set
SIZ6 field in KEY block
off set
SIZ7 field in KEY block
off set
SIZE
RMSDES utility
SIZE command
EDI editor
/SIZE keyword
LOAD command
VMR
Skeleton
source file
MACR0-11
Skipping
output
/SL switch
CMP utility
RMSBCK utility
RMSCNV utility
RMSRST utility
Slash
DCL qualifier
double (//)
EDI editor
MCR qualifier
ODT
single (/)
Slash operator (/)
/SLAVE keyword
SET command
VMR
Slave terminal

RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Macros 6-68
RMS-11 Utilities 2-36
Utilities 2-46
MCR Operations 3-106
System Management 10-27
Program Devel0pment 2-4
Introduction 1-16 to 1-17
Error Logging 2-4, 2-7
Task Builder 10-44
Utilities 12-3
RMS-11 Utilities 6-6, 6-10
RMS-11 Utilities 4-12
RMS-11 Utilities 7-6, 7-12
Command Language 3-17
EDT Editor 4-3
Task Builder 1-6
Program Development 2-16
EDT Editor 4-5
Program Development 5-4
Task Builder 1-5 to 1-6
ODT 2-7, 4-2 to 4-3
MCR Operations 3-197
System Management 10-59
Introduction 5-2, Gloss-30
Command Language 3-41

SL IPR

See SLP utility
Slow Task Builder
to improve overhead
SLP utility
audit trail
changing value
deleting
setting
length
position
suppressing
checksum
edit command line
edit commands
error message
file
input
listing
output

Command Language 6-81
Task Builder F-11
Introduction 2-3
Command Language 4-17 to 4-19,
9-15
Utilities 13-16
Utilities 13-17
Utilities 13-19
Utilities 13-17
Utilities 13-17
Utilities 13-18
Utilities 13-3
Utilities 13-5
Utilities 13-5
Utilities 13-20
Utilities 13-2
Utilities 13-3
Utilities 13-3

Index-268

MASTER INDEX
SLP utility
file ( Cont • )
processing
source
creating
updating
indirect command file
initiating (invoking)
operator
switch
/SLV keyword
INSTALL command
VMR
RUN command

Utilities 13-4
Utilities 13-14
Utilities 13-9
Utilities 13-8
Utilities 13-1
Utilities 13-9
Utilities 13-14
MCR Operations 3-96
System Management 10-24
MCR Operations 3-154

$$SLVC

reserved PSECT name
SMSG$
SN command
$SNAP
subset of Postmortem Dump Task
SNAP$ macro
format of
Snapshot dump
See also $SNAP
example of
format of macro for creating
SNPBK$ macro
format of
SNPDF$ macro
Soft error
definition
Soft error limit switch
Software
configuration
minimum
supplied
Basic MCR
display program
OTL
RSDV05
RSDVlH
RSDV52
SETT IM
SIP
TKTN
Software Performance Monitor
See SPM
Software Performance Report
See SPR
Son of Stopgap
See SOS editor
SORT command
Sort option
ACNT
Sort routine error code
RMS I FL utility
Sort work files (RMSIFL)
allocating space
primary key sort
device allocation
SORT-11
Sorting (RMSIFL)
alternate key

Task Builder E-4
Error Logging 1-4
Executive 5-162
EDT Editor 8-19
Program Development 1-7 to 1-8,
5-9 to 5-10
Program Development 5-9 to 5-10
Task Builder D-6
Task Builder D-8
Task Builder D-5 to D-6
Task Builder D-10 to D-12
Task Builder D-7
Task Builder D-6
Task Builder D-7
Task Builder D-6
Error Logging 1-3
Error Logging 2-4, 2-7
Introduction Gloss-30
System Generation (llS) 1-2
System Generation (llS) 1-3
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation

(llS)
(llS)
(llS)
(llS)
(llS)
(llS)
(llS)
(llS)
(llS)

2-1
2-1
2-1
2-1
2-1
2-1
2-1
2-1
2-1

Command Language 4-63 to 4-69,
9-42
System Management 2-8
RMS-11 Utilities D-1
RMS-11 Utilities 3-1, 3-10, 3-12
RMS-11 Utilities 3-13
RMS-11 Utilities 3-7
Command Language 4-63 to 4-69,
9-42
RMS-11 Utilities 3-11 to 3-13

Index-269

MASTER INDEX
Sorting (RMSIFL) (Cont.)
alternate key files
bypassing primary key sort
input file organization
primary key
work files
SOS editor

RMS-11 Utilities
RMS-11 Utilities
RMS-11 Utilities
RMS-11 Utilities
RMS-11 Utilities
Command Language
9-16

SOURCE
RMSDES utility
SOURCE argument
Source file

RMS-11 Utilities 2-30
PDP-11 MACR0-11 8-11
Introduction 2-1, 4-3, 4-5,
Gloss-30

See also Source language
See also SLP utility
case control in
FORTRAN IV
adding debugging statements
blank line
comment line
creating
editing
MACR0-11
assembling
creating from a skeleton
editing
error
format
skeleton
inserting lines
listing
macro library call
preface
terminating input in
Source files
applying corrections to
Source language
See also Source file
Source Language Input Program
See SLP utility
Source line format
Source module
DCL
updating
Executive
updating
MCR
updating
/-SP
SP command
EDI editor
/SP switch
CMP utility
DMP utility
FLX utility
LBR utility
PIP utility
SLP utility
Space
application design
consideration
checkpoint
allocating

3-7
3-8 to 3-9
3-9
3-9
3-7, 3-13
4-20 to 4-22,

PDP-11 MACR0-11 6-19
Program Development 7-7
Program Development 7-3
Program Development 7-3
Program Development 7-2 to 7-3
Program Development 7-4 to 7-5,
7-7, 7-9
Program Development 3-1 to 3-2
Program Development 2-12
Program Development 2-13 to 2-18
Program Development 3-2 to 3-4
Program Development 2-1 to 2-3
Program Development 2-4
Program Development 2-18
Program Development 3-4 to 3-6
Program Development 6-3 to 6-4
Program Development 2-1
PDP-11 MACR0-11 6-39
Release Notes 1-40
Introduction 4-4, Gloss-30
Command Language 6-2

PDP-11 MACR0-11 2-5
Release Notes 1-46
Release Notes 1-40
Release Notes 1-42
Crash Dump Analyzer 2-6
Utilities 2-45
PDP-11 MACR0-11 8-7
Task Builder 10-45
Utilities 12-3
Utilities 11-8
Utilities 4-8
Utilities 10-29
Utilities 3-38
Utilities 13-15
RMS-11 User's Guide 2-4, 8-1
MCR Operations 3-8
Index-270

MASTER INDEX
Space (Cont.)
data storage
I/O buffer size
task size
$SPACE macro
RSTS/E
SPACE operation

RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

access modes
$SPACE macro
Space problems
disk space recovery
<SPACE> symbol
Spanning blocks
variable-length records
Spawn directive
Spawning
a CLI
a utility
system tasks
Special buffer handling
example
Special character
as delimiter
assembler
summary
entering
nokeypad substitution
Special symbol
format
logical
numeric
string
type
Specify Command Arrival AST
directive
Specify Floating Point Processor
Exception AST directive
Specify Power Recovery AST
directive
Specify Receive Data AST
directive
Specify Receive-By-Reference AST
directive
Specify Requested Exit AST
directive
Specify SST Vector Table For
Debugging Aid directive
Specify SST Vector Table For Task
directive
SPECINS function
Speed
application design
consideration
Speed detection
auto-baud
/SPEED keyword
SET command
VMR
SPM
SPND$S
Spool
definition
spooling output

User's Guide 2-5
2-5
,,User's
,_ ,..Guide
..

___

Ui:>l:::.i.

..:~-

i:>

\,;lii,.i.i.Y'I;

'")_C

,-..J

Macros 5-120
Macros D-4
Introduction 4-7
Macros 4-14
Introduction 4-7
Macros 5-120

System Generation (llM) 6-3, 6-14
MCR Operations 4-11
RMS-11 Introduction 4-2
RMS-11 User's Guide 1-16: 1-19:
3-1
RMS-11 User's Guide 2-16
Executive 5-172
Executive 4-1
Executive 4-5
Executive 4-5
Executive 4-5
Writing I/O Driver 6-9
Writing I/O Driver 6-9 to 6-11
PDP-11 MACR0-11 3-1 to 3-3
EDT Editor 2-30
PDP-11 MACR0-11 B-1
I/O Operations 7-9
EDT Editor 8-16
MCR Operations 4-8
MCR Operations 4-8
MCR Operations 4-8
MCR Operations 4-10
MCR Operations 4-12
MCR Operations 4-8
Executive 5-145
Executive 5-160
Executive 5-170
Executive 5-182
Executive 5-191
Executive 5-184
Executive 5-202
Executive 5-204
EDT Editor 5-48
RMS-11 User's Guide 2-3, 8-1
I/O Drivers 2-42
MCR Operations 3-198
System Management 10-59
System Generation (llM) 4-62
Executive 5-169
Batch and Queue Gloss-8
Batch and Queue 2-1

Index-271

MASTER INDEX
Spooled device
definition
line printer
output
redirecting
Spooling
file
PIP utility
library file
LBR utility
transparent
SPR
reporting problems using
SPRA$
SPWN$
SPWN$ directive

Batch and Queue 1-3, 2-1
Batch and Queue Gloss-8
Batch and Queue 1-3
Batch and Queue 1-3
Executive 5-83
I/O Operations 8-1
Utilities 3-38
Utilities 10-29
System Management 7-1
Release Notes 1-38
Executive 5-170
Executive 5-172

IOX

in EXECUTE command
SPY command
IOX

/SQ switch
SLP utility
/SR switch
PIP utility
SRC symbolic argument
SRDA$
SREA$
SREF$
SREX$
SRRA$
SS command
EDI editor
/SS switch
LBR utility
symbol definition file
reducing overhead
SSM command
command line format
example
SST
definition
ODT
relation to Postmortem Dump
role in task termination
service routine
specifying vector table
task's stack content
trap vector table format
SST fauit
abnormal
internal
SST stack content
register
SST vector
handling
register
SST vector address
declaring
Stack
declaring size
STACK option
Stack pointer
kernel
user

System Management 4-36
System Management 4-58
Task Builder 10-46
Utilities 13-16
Utilities 3-39
PDP-11 MACR0-11 6-11
Executive 5-182
Executive 5-184
Executive 5-188
Executive 5-184
Executive 5-191
Utilities 2-46
Utilities 10-29
Task Builder F-4
Error Logging 1-3
MCR Operations 3-212
MCR Operations 3-212
MCR Operations 3-212
Crash Dump Analyzer 4-2
Executive 2-5
I/O Drivers 1-12
Executive 2-4
Program Development 5-8
Program Development 1-7
Program Development 4-8 to 4-9
Executive 2-5
Executive 5-204
Executive 2-6
Executive 2-5
Writing I/O Driver 3-27
Writing I/O Driver 3-26
ODT 2-7, 5-4
ODT 2-11
ODT 2-7, 5-5
Task Builder 11-27
Task Builder 11-32
Task Builder 11-32
Crash Dump Analyzer 3-2
Crash Dump Analyzer 3-2
Index-272

MASTER INDEX
Stack pointer definition
Stack structure
abnormal SST fault
~ -

U d Ld

-- -

.L l.. t::m1;::,

U U

.L. -

),..

;:; l..dl.; I\.

internal SST fault
Stand-alone
definition
Stand-Alone Configuration and
Disk Sizing Program (CNF)
See also BRU64K
Standard Function System
See also Saved answer file
description
options included
purpose
question
restriction
Standard ODL file
and file organization
DAPllX
RMSllS
RMSllX
RMS12X
START command
DCL
IOX

START/PROCESSOR command
DCL
START/QUEUE command
DCL
START/QUEUE/MANAGER command
DCL
START/UNBLOCK command
Starting
an EDT editing session
keypad editing
line editing
nokeypad editing
Startup command
RMS-11
Startup command file
creating
definition
EDTINI. EDT
specify mode
use of
STARTUP.CMD
RMS procedures
State table
initializing
Statement
MACR0-11
format
Statement format
Static common region
checkpointing
resident common
resident libraries
shuffling
Statistics
system
display in RMD
Statistics block
format

PDP-11 MACR0-11 3-10
Writing I/O Driver 3-27
L.T-:.1..:-ftL .i. l...i.U':;t

T/l"'l

J../ V

T"\-:·•-.1.1.L J.VC:.L

'10

.J-.&.o

Writing I/O Driver 3-26
System Generation (llM) 1-6

System Generation (llM) 1-2
System Generation (llM) 3-11
System Generation (llM) 3-13
System Generation (llM) 3-11
System Generation (llM) 4-6
System Generation (llM) 3-12
RMS-11 User's Guide 8-3, 8-5
RMS-11 User's Guide 8-5
RMS-11 User's Guide 8-6
RMS-11 User's Guide 8-5
RMS-11 User's Guide 8-5
RMS-11 User's Guide 8-6
Command Language 7-25, 9-43
System Management 7-26 to 7-27
System Management 4-59
Command Language 9-43
System Management 7-27 to 7-31
Command Language 9-44
System Management 7-26 to 7-27
Command Language 9-44
System Management 7-3, 7-26 to
7-27
Command Language 7-25 to 7-26,
9-44
EDT Editor 2-1, 4-1
EDT Editor 2-5, 5-1
EDT Editor 2-20, 6-1, 7-1
EDT Editor 2-36, 8-1
Release Notes 2-19
EDT Editor 4-9
EDT Editor 1-5
EDT Editor 1-5, 4-9
EDT Editor 9-5
EDT Editor 4-1
System Generation (llM) 6-9, 6-19
System Generation (llM) 6-11
I/O Operations 7-2, 7-8
I/O Operations 7-2
Program Development 1-4
Program Development 2-3
PDP-11 MACR0-11 2-1
Executive 5-16
System Management 14-3
System Management 14-2
System Management 14-2
System Management 14-5
System Management 6-13D
I/O Operations 3-11
I/O Operations H-1
Index-273

MASTER INDEX
Status
displaying
during IOX exercising
emitting
Status block
I/O
Status code
ERROR
definition
I/O
SEVERERROR
definition
SUCCESS
definiton
WARNING
definition
Status Control Block
See SCB
Status flag
task
Status return
A/D converter
card reader
cassette
DECtape
disk
DT07
graphic display driver
ICS/ICR
laboratory peripheral system
line printer
magnetic tape
message-oriented communication
paper tape
PCL receiver
PCL transmitter
terminal
TU58
UDC
/STB
.STB file
absolute reg ion
content of a
excluding symbol from
for region
including symbol in
interaction of /CO/LI/PI
switches
overlaid region
global symbols in
program sections
program sections in
relocatable region
use of /CO/LI/PI switches
/STD
STD

entry
deleting
Step command
STIM$
$STKDP

System Management 4-58
Executive 5-64
I/O Drivers 1-35
Batch and Queue Gloss-4
I/O Drivers 1-33, B-1
Batch and Queue Gloss-4
Batch and Queue Gloss-4
Batch and Queue Gloss-4

Command Language 7-48
I/O Drivers 14-8 to 14-9
I/O Drivers 11-3, 11-7
I/O Drivers 9-3 to 9-5
I/O Drivers 6-4 to 6-6
I/O Drivers 5-8 to 5-11
I/O Drivers 23-7
I/O Drivers 20-3
I/O Drivers 18-13 to 18-14
I/O Drivers 16-29 to 16-33
I/O Drivers 10-4 to 10-5
I/O Drivers 8-10 to 8-12
I/O Drivers 12-8 to 12-10
I/O Drivers 17-3 to 17-4
I/O Drivers 13-11 to 13-12
I/O Drivers 13-6 to 13-8
I/O Drivers 2-23 to 2-27
I/O Drivers 7-4 to 7-5
I/O Drivers 15-32 to 15-34
Crash Dump Analyzer 2-6
Task Builder 5-9
Task Builder 5-7, 5-9
Task Builder 5-5
Task Builder 5-11
Task Builder 5-4 to 5-5, 5-14,
5-16
Task Builder 5-11
Task Builder 5-4
Task Builder 5-11 to 5-12
Task Builder 5-11
Task Builder 5-16
Task Builder 5-5
Task Builder 5-9, 5-16
Task Builder 5-5, 5-9
Crash Dump Analyzer 2-2
Introduction 4-9, 5-7, Gloss-17,
Gloss=30
Command Language 7-1 to 7-2, 7-26
to 7-34, 7-51 to 7-53, 9-29
MCR Operations 2-22, 3-93
MCR Operations 3-146
ODT 2-10, 3-3
Executive 5-i95
Crash Dump Analyzer 4-2

Index-274

MASTER INDEX
$STKDP pointer
use of
in fault tracing
l"'mT /"\~

vJ.1.IVY

$STMAP routine
$STMAP routine
use of
to obtain UMRs
$STMP1 routine
use of
to obtain UMRs
STOP command
DCL
.. STOP directive
example
format
Stop directive
Stop For Logical OR Of Event
Flags directive
Stop For Single Event Flag
directive
STOP statement
STOP$S
Stop-bit synchronization
directives
STOP/ABORT command
DCL
STOP/BLOCK command
STOP/PROCESSOR command
DCL
STOP/QUEUE command
DCL
STOP/QUEUE/MANAGER command
DCL
Stopped task
Stopping
command
Storage
data
Storage Map File header
$STORE macro
example
$STPCT routine
use of
by ACP
%STR
Stream
See also Access stream
access
connecting
See CONNECT operation
disconnecting
See DISCONNECT operation
internal identifier
See ISI field in RAB
unlocking bucket
See FREE operation
writing buffers
See FLUSH operation
Stream context
advancing to next volwue
See NXTVOL operation
rewinding
See REWIND operation

Writing I/O Driver 3-23
Executive 5-198
Writing I/O Driver B-2
Writing I/O Driver 5-26, B-3
Writing I/O Driver B-1
Writing I/O Driver 5-27, B-2 to
B-3
Writing I/O Driver B-1
System Management 7-23
MCR Operations 4-51
MCR Operations 4-51
MCR Operations 4-51
Executive 5-200
Executive 5-198
Executive 5-201
Executive 5-70
Executive 5-200
Executive 2-7, 2-11
Executive 2-12
Command Language 9-44
System Management 7-25
Command Language 7-23 to 7-24,
9-45
Command Language 9-45
System Management 7-24 to 7-25
Command Language 9-45
System Management 7-23
Command Language 9-46
System Management 7-23
ColDDland Language 7-25
Introduction 1-21
RMS-11 Introduction 2-1
I/O Operations E-2
RMS-11 Macros 2-10
RMS-11 Macros 7-3, 7-7, 7-11,
7-15
Writing I/O Driver D-7
Error Logging 5-23 to 5-24
RMS-11 Macros 4-2
RMS-11 Introduction 4-3

Index-275

MASTER INDEX
Stream operation
See also Operation
block stream
record stream
Stream operation macro
$CONNECT
declaring
$DISCONNECT
$FLUSH
$FREE
$NXTVOL
$REWIND
$WAIT
Stream record format

RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-13
RMS-11 Macros 4-8
RMS-11 Macros 5-6
RMS-11 Macros C-3
RMS-11 Macros 5-27
RMS-11 Macros 5-56
RMS-11 Macros 5-58
RMS-11 Macros 5-70
RMS-11 Macros 5-114
RMS-11 Macros 5-126
RMS-11 Introduction 3-4
RMS-11 User's Guide 1-11, 2-16

See also FB$STM code in RFM field
terminators
RMS-11 Introduction 3-4
RMS-11 User's Guide 2-16
Introduction 2-12 to 2-13, 4-10,
String
Gloss-30
MCR Operations 4-16
constant
delimiter
EDT Editor 7-17
replacing
EDT Editor 7-14
search (keypad)
EDT Editor 5-21 to 5-25
search (line editing)
EDT Editor 7-8
search (nokeypad 'string')
EDT Editor 8-4
substituting
keypad editing
EDT Editor 5-46
line editing
EDT Editor 2-30, 7-16 to 7-19
no keypad editing
EDT Editor 2-42, 8-16
symbol
MCR Operations 4-7, 4-16
defining
MCR Operations 4-50
MCR Operations 4-39
testing
String conversion function
Error Logging 5-19
String handling function
Error Logging 5-23 to 5-24
String key
RMS-11 User's Guide 6-3
See also XB$STG mask in DTP field
segmented
RMS-11 User's Guide 6-7
String search buffer
example
EDT Edi tor 5-23
<STRLEN> symbol
MCR Operations 4-11
Structure
in TKB
size of
Task Buiider F-3
indexed files
conceptual
RMS-11 User's Guide 5-4
physical
RMS-11 User's Guide 5-2
relative files
RMS-11 User's Guide 4-1
conceptual
RMS-11 User's Guide 4-1
physical
RMS-11 user's Guide 4-1
sequential files
RMS-11 User's Guide 3-1
conceptual
RMS-11 User's Guide 3-2
physical
RMS-11 User's Guide 3-1
STS field in FAB
RMS-11 Macros 2-14, 3-5
CLOSE operation
RMS-11 Macros 5-4
CREATE operation
RMS-11 Macros 5-21
DISPLAY operation
RMS-11 Macros 5-32
ENTER operation
RMS-11 Macros 5-38
ERASE operation
RMS-11 Macros 5-43
EXTEND operation
RMS-11 Macros 5-47
off set
RMS-11 Macros 6-22
OPEN operation
RMS-11 Macros 5-82
PARSE operation
RMS-11 Macros 5-89
REMOVE operation
RMS-11 Macros c: , "c:
RENAME operation
RMS-11 Macros 5-112
SEARCH operation
RMS-11 Macros 5-118
:J-.Lv~

Index-276

MASTER INDEX
STS field in FAB {Cont.)
summary
STS field in RAB
CONNECT operation
DELETE operation
DISCONNECT operation
FIND operation
FLUSH operation
FREE operation
GET operation
NXTVOL operation
off set
PUT operation
READ operation
REWIND operation
SPACE operation
summary
TRUNCATE operation
UPDATE operation
WRITE operation
STSE$
STV field in FAB
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
offset
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
STV field in RAB
CONNECT operation
DELETE operation
DISCONNECT operation
FIND operation
FLUSH operation
FREE operation
GET operation
NXTVOL operation
offset
PUT operation
READ operation
REWIND operation
SPACE operation
summary
TRUNCATE operation
UPDATE operation
WRITE operation
/SU switch
PIP utility
RMSBCK utility
RMSCNV utility
RMSRST utility
SU$-family symbol
declaring
value
/SUB keyword
SET command
VMR
Subconditional assembly

RMS-11 Macros 6-64
RMS-11 Macros 2-14, 4-2
RMS-11 Macros 5-8
RMS-11 Macros 5-26
RMS-11 Macros 5-27
RMS-11 Macros 5-50, 5-53, 5-55
RMS-11 Macros 5-56
RMS-11 Macros 5-58
RMS-11 Macros 5-62, 5-65, 5-68
RMS-11 Macros 5-70
RMS-11 Macros 6-115
RMS-11 Macros 5-93, 5-97
RMS-11 Macros 5-99, 5-101
RMS-11 Macros 5-115
RMS-11 Macros 5-120
RMS-11 Macros 6-141
RMS-11 Macros 5-122
RMS-11 Macros 5-125
RMS-11 Macros 5-128, 5-130
Executive 5-201
RMS-11 Macros 2-14, 3-5
RMS-11 Macros 5-4
RMS-11 Macros 5-21
RMS-11 Macros 5-32
RMS-11 Macros 5-38
RMS-11 Macros 5-43
RMS-11 Macros 5-47
RMS-11 Macros 6-22
RMS-11 Macros 5-82
RMS-11 Macros 5-89
RMS-11 Macros 5-105
RMS-11 Macros 5-112
RMS-11 Macros 5-118
RMS-11 Macros 6-65
RMS-11 Macros 2-14, 4-2
RMS-11 Macros 5-8
RMS-11 Macros 5-26
RMS-11 Macros 5-27
RMS-11 Macros 5-50, 5-53, 5-55
RMS-11 Macros 5-56
RMS-11 Macros 5-58
RMS-11 Macros 5-62, 5-65, 5-68
RMS-11 Macros 5-70
RMS-11 Macros 6-115
RMS-11 Macros 5-93, 5-97
RMS-11 Macros 5-99, 5-101
RMS-11 Macros 5-115
RMS-11 Macros 5-120
RMS-11 Macros 6-142
RMS-11 Macros 5-122
RMS-11 Macros 5-125
RMS-11 Macros 5-128, 5-130
Utilities 3-12
RMS-11 Utilities 6-7
RMS-11 Utilities 4-5, 4-7, 4-13,
4-15
RMS-11 Utilities 7-8
RMS-11 Macros C-3
RMS-11 Macros A-1
MCR Operations 3-199
System Management 10-60
PDP-11 MACR0-11 6-53 to 6-54
Index-277

MASTER INDEX
Subexpression
TPARS
using
Subpacket definition
dispatch module
DSPlMl
DSPlPl
DSP2Ml
DSP2Pl
DSP3Ml
DSP3Pl
DSP4Ml
DSP4Pl
DSP5Ml
DSP5Pl
DSP6Ml
DSP6Pl
DSP7Ml
DSP7Pl
SUBPACKET statement
Subpartition
creating
eliminating
Subroutine
calling
returning from
SUBS function
SUBSTITUTE command
EDT
SUBSTITUTE NEXT command
Substituting text
keypad editing
line editing
nokeypad editing
redefined key
Substitution
enabling
format control
mode
Substring
searching for
Subsystems
IC and IS
IP
Subtopic
HELP
Subtraction operator
Success
handler
SUM block
chaining to FAB
declaring
initializing
summary
.SUMLl
reserved global symbol
Summary listing
RMSBCK utility
RMSCNV utility
RMSRST utility
Summary report
generated by PRINTSUMMARY

I/O Operations 7-7
I/O Operations 7-19
Error Logging 4-69
Error Logging 4-69 to 4-71
Error Logging 4-72
Error Logging 4-72
Error Logging 4-73
Error Logging 4-73
Error Logging 4-73
Error Logging 4-73
Error Logging 4-74
Error Logging 4-74
Error Logging 4-74
Error Logging 4-74
Error Logging 4-74
Error Logging 4-74
Error Logging 4-75
Error Logging 4-75
Error Logging 5-29
Command Language 7-38, 7-40 to
7-45, 9-32
MCR Operations 2-20
MCR Operations 3-199
System Management 10-60
MCR Operations 3-200
System Management 10-61
Introduction 4-10 to 4-11, 4-13,
Gloss-31
MCR Operations 4-37
MCR Operations 4-48
EDT Editor 5-44
EDT Editor 2-30, 7-16
Introduction 2-11 to 2-12
EDT Editor 7-19
EDT Edi tor 5-44, 5-46
EDT Edi tor 2-30, 7-16, 7-19
EDT Edi tor 2-42, 8-16
EDT Edi tor 10-8
MCR Operations 4-17
MCR Operations 4-33
MCR Operations 4-18
MCR Operations 4-33
MCR Operations 4-16
MCR Operations 4-51
System Generation (llM) 4-92
System Generation (llM) 4-96
EDT Editor 1-4, 7-9
PDP-11 MACR0-11 3-2, 3-5
RMS-11 Macros 2-17
RMS-11 Introduction 4-8
RMS-11 Macros 2-12
RMS-11 Macros 2-8
RMS-11 Macros 2-9
RMS-11 Macros 6-145
Task Builder E-2
RMS-11 Utilities 6-10
RMS-11 Utilities 4-12
RMS-11 Utilities 7-12
System Management 4-47
Index-278

MASTER INDEX
Summary report (Cont.)
IOX

System Management 4-20

Summary XAB
See SUM block
SUMMARYTIME command
System Management 4-60
IOX
SUPERSEDE
RMS-11 Utilities 2-35
RMSDES utility
/SUPERSEDE qualifier
Utilities 7-21
BRU utility
Supersession
See also FB$SUP mask in FOP field
RMS-11 Utilities 6-7
RMSBCK utility
RMS-11 Utilities 4-7, 4-13
RMSCNV utility
RMS-11 Utilities A-7
RMSDEF utility
RMS-11 Utilities 7-8
RMSRST utility
ODT 1-4
Supervisor libraries
ODT 1-4, 3-2
Supervisor mode
RMS-11 User's Guide 8-7, 8-9
ODT 2-11
command
ODT 1-4
debugging
install
ODT 1-4
READ/WRITE
ODT 2-11
set
Introduction 1-2, 2-1, Gloss-31
Support
Support routine
I/O page
direct access
System Generation (llS) 4-13
Executive 5-169
Suspend directive
Executive 5-202
SVDB$
Executive 5-204
SVTK$
Error Logging 2-4, 2-8
/SW switch
Introduction 5-6 to 5-7, Gloss-31
Swapping
MCR Operations 2-5
Switch
See also individual switch
entries
See also RMSBCK, RMSCNV,RMSDSP,
RMSIFL, RMSRST
Crash Dump Analyzer 2-1
analysis
MCR Operations 2-5
argument
BAD utility
Utilities 6-5
Utilities 7-12
BRU utility
CMP utility
Utilities 12-2
Task Builder 10-1
conflict in
CRF utility
Utilities B-1
PDP-11 MACR0-11 8-16 to 8-17
cross-reference control
default
modifying
Task Builder F-7 to F-11
Utilities 11-3
DMP utility
Utilities 8-9
DSC utility
PDP-11 MACR0-11 8-6 to 8-7
file specification
Utilities 4-3
FLX utility
Utilities 5-7
FMT utility
MCR Operations 2-5
form
PDP-11 MACR0-11 8-5 to 8-6
format
Crash Dump Analyzer 2-1
function
PDP-11 MACR0-11 8-6 to 8-7
function control
MCR Operations 4-19
Indirect
Utilities 10-9
LBR utility
listing control
PDP-11 MACR0-11 8-6 to 8-7
PDP-11 MACR0-11 8-6 to 8-7
macro library
Task Builder F-7 to F-11
modifying default of
Utilities 14-6
PAT ut~l~ty
nTn ......... i ...... ,.
Utilities 3=14
r.1.r "'"'.&..1..&."'.l'
RMS-11 Utilities 6-4 to 6-5
RMSBCK utility
RMSCNV utility
RMS-11 Utilities 4-5, 4-7
RMS-11 Utilities 5-3 to 5-4
RMSDSP utility
Index-279

MASTER INDEX
Switch (Cont.)
RMSIFL utility
RMSRST utility
SLP utility
summary
BAD
BRU
CMP
DMP
DSC
EDI
FLX
FMT
LBR
PAT
PIP
SLP
VFY
ZAP
syntax
Task Builder
/AC [ :n]
/AL
/CC
/CM
/CO
/CP
/CR
/DA
/DL
/EA
/EL
/FP
/FU
/HD
/IP
/LB
/LI
/MA
/MM
/MP
/NM
/PI
/PM
/PR[ :n]

/RO
/SE
/SG

/SH

/SL
/SP
/SQ
/SS
/TR
/WI
/XH
/XT [ :n]
VFY utility
ZAP utility
Switch definition
Switch descriptor table
end
format of entry
Switch register
question
Switch switch

RMS-11 Utilities 3-3, 3-5
RMS-11 Utilities 7-3, 7-5
Utilities 13-14
Task Builder 10-2 to 10-4
Utilities A-12
Utilities A-13
Utilities A-22
Utilities A-20
Utilities A-16
Utilities A-1
Utilities A-9
Utilities A-11
Utilities A-18
Utilities A-24
Utilities A-5
Utilities A-23
Utilities A-17
Utilities A-25
Task Builder 10-1
Task Builder 10-1
Task Builder 10-5
Task Builder 10-6
Task Builder 10-7
Task Builder 10-8
Task Builder 10-9
Task Builder 10-10
Task Builder 10-11 to 10-13
Task Builder 10-14
Task Builder 10-15
Task Builder 10-16
Task Builder 10-17
Task Builder 10-18
Task Builder 10-19
Task Builder 10-20
Task Builder 10-22
Task Builder 10-23 to 10-24
Task Builder 10-25
Task Builder 10-26
Task Builder 10-27
Task Builder 10-28
Task Builder 10-30
Task Builder 10-31
Task Builder 10-32
Task Builder 10-33
Task Builder 10-34
Task Builder 10-35
Task Builder 10-36
Task Builder 10-37
Task Builder 10-44
Task Builder 10-45
Task Builder 10-46
Task Builder 10-47 to 10-49
Task Builder 10-50
Task Builder 10-51
Task Builder 10-52
Task Builder 10-53
Utilities 9-4
Utilities 15-2
I/O Operations 6-21 to 6-26
I/O Operations 6-22 to 6-26
I/O Operations 6-29
I/O Operations 6-26

System Generation (llM) 4-10
Error Logging 2-4, 2-8
Index-280

MASTER INDEX
Delete subswitch
New version subswitch
Switch value descriptor table
end
entry format
Switching access modes
$SWSTK routine
$SY
predefined syntax element in
MML
SY:
pseudo device
<SYDISK> symbol
SYM symbolic argument
Symbol
affecting search for
code and mask
control directive
cross-reference
cross-reference listing
control of
declaration flag byte
defining
def ini ti on file
excluding symbol from a
for system-owned region
for user-owned region
including symbols
overriding
reducing overhead
directory record
declare global
end of global
internal
displaying
example of
field-offset
full search in overlays
specifying
global
address of ODT SST routine
ambiguously defined in
overlay
declaring definition in a
task
default library resolution
defining
deleting definition of
directory record
directory record format
end of directory record
entry point
excluding in a task
from the default library
in autoloadable segment
in cross-reference listing
including in a task
multiplydefined
multisegment task
name
name entry
overlaid region .STB file

Error Logging 2-4, 2-9
Error Logging 2-4, 2-9
I/O Operations 6-27
I/O Operations 6-29
I/O Operations 6-28
RMS-11 Introduction 3-13
Writing I/O Driver 5-28
System Management 12-44
Command Language 4-2, 4-77 to
4-79, 5-6, 5-72 to 5-73, 9-31
MCR Operations 4-14
PDP-11 MACR0-11 6-12
Introduction Gloss-31
RMS-11 Introduction 4-7
Task Builder 2-7
RMS-11 Introduction 4-7
PDP-11 MACR0-11 6-48 to 6-49
Program Development 3-7 to 3-8
PDP-11 MACR0-11 6-22
Task Builder A-7
MCR Operations 4-3, 4-7
System Management 10-2
Task Builder 11-21
Task Builder 11-11
Task Builder 11-29
Task Builder 11-18
System Management 10-4
Task Builder F-4
Task Builder A-2
Task Builder A-11
Task Builder A-24
MCR Operations 4-56
RMS-11 Introduction 4-7
Task Builder 10-19
Introduction 4-6, 4-8, Gloss-15
PDP-11 MACR0-11 1-2
Program Development 1-5
Task Builder 11-24
Task Builder 3-16
Task Builder 11-17
Task Builder 3-18
MCR Operations 4-3
MCR Operations 4-35
Task Builder A-2
Task Builder A-4
Task Builder A-11
Program Development 1-4
Task Builder 11-21
Task Builder 3-18
Task Builder 4-4, 4-6
Task Builder 10-12 to 10-13
Task Builder 11-18
Task Builder 3-16
Task Builder 3-16
Task Builder A-6
Task Builder A-6
Task Builder 5-11
Index-281

MASTER INDEX
Symbol
global (Cont.)
overlay search sequence
resolution
resolution in co-tree
resolution in multisegment
task
undefined
in cross-reference listing
internal
autoloadable library
end-of-module
end-of-module format
global
internal symbol name
internal symbol name format
line-number
literal record
literal record format
module name
overall format
PC correlation
PSECT item
relocatable/relocated
start-of-segment
task identification
TKB generated
local
accessing
Begin-End block with
definition
deleting definition of
reserved
logical
defining
testing
macro
definition
MACR0-11 evaluation
marking undefined reference
name
name entry
internal
number of processed for
performance
numeric
decrementing
defining
incrementing
radix of
redefining
substituting
reserved
reserved for the Task Builder
resolving
overlay region
saved answer
search
special
format

Task Builder 3-17
Program Development 1-4 to 1-5,
4-2
Task Builder 2-7, 3-17
Task Builder 3-17
Task Builder 3-16
Task Builder 2-7
Task Builder 10-12
Task Builder A-26 to A-27
Task Builder A-30
Task Builder A-32
Task Builder A-28
Task Builder A-30
Task Builder A-31
Task Builder A-29 to A-30
Task Builder A-30
Task Builder A-31
Task Builder A-27 to A-28
Task Builder A-24 to A-25
Task Builder A-29 to A-30
Task Builder A-29
Task Builder A-27
Task Builder A-25 to A-26
Task Builder A-26
Task Builder A-25
Introduction 4-6 to 4-7, Gloss-19
Program Development 1-4 to 1-5,
2-7 to 2-8
MCR Operations 4-21
MCR Operations 4-3, 4-28
Program Development 2-7 to 2-8
MCR Operations 4-35
MCR Operations 4-17
MCR Operations 4-7
MCR Operations 4-48
MCR Operations 4-41
Program Development 1-4, 1-10,
2-7, 6-4
Program Development 1-4, 3-1 to
3-2
PDP-11 MACR0-11 6-21
MCR Operations 4-7
Task Builder A-5
Task Builder F-3
MCR Operations 4-7, 4-14
MCR Operations 4-30
MCR Operations 4-49
MCR Operations 4-42
MCR Operations 4-15
MCR Operations 4-49
MCR Operations 4-15
PDP-11 MACR0-11 2-3, 3-1
Task Builder E-1
Task Builder 5-11
System Generation (llM) A-1

Task Builder 10-47 to 10-49
MCR Operations 4-8
MCR Operations 4-8
Index-282

MASTER INDEX
Symbol
special (Cont.)
logical
numeric

string
type
string
defining
substituting
table
deleting definition in
free space in
search order
testing
type
use
user-defined
$ symbol
Symbol definition
SYSLIB.OLB
Symbol definition file
See .STB file
Symbol table
Symbol table switch
Symbol-declaration macro
Symbolic offset
for system data structures
SYMBOLS argument
<SYMTYP> symbol
SYN argument to RAB$B macro
RSTS/E
Synchronous line interface
DMCll
DPll
DQll
DUll
DUPll
Synchronous operation

MCR Operations 4-8
MCR Operations 4-iO
MCR Operations 4-12
MCR Operations 4-8
MCR Operations 4-7,
MCR Operations 4-50
MCR Operations 4-17
PDP-11 MACR0-11 1-1
MCR Operations 4-3
MCR Operations 4-35
MCR Operations 4-11
PDP-11 MACR0-11 3-7
MCR Operations 4=38
MCR Operations 4-7
MCR Operations 4-7
PDP-11 MACR0-11 3-6
ODT 5-1

4-16
to 1-2

to 4=39
to 3-8

Task Builder 2-7
Introduction 4-6
Crash Dump Analyzer 2-8
RMS-11 Macros 2-2
Crash Dump Analyzer B-1
Writing I/O Driver C-1
PDP-11 MACR0-11 8-11
MCR Operations 4-11
RMS-11 Macros 2-8
RMS-11 Macros D-4
I/O Drivers 12-3
I/O Drivers 12-3
I/O Drivers 12-3
I/O Drivers 12-3
I/O Drivers 12-4
RMS-11 Introduction 4-4
RMS-11 User's Guide 8-2

See also RB$ASY mask in ROP field
Synchronous System Trap
See SST
Syntax
Introduction 1-14
Syntax element
defining
I/O Operations 7-3
predefined MML
System Management 12-39 to 12-40,
12-41 to 12-45
I/O Operations 7-4 to 7-5, 7-8
types
Syntax error
See Q error
Syntax rule
summary of
Task Builder 1-10
Crash Dump Analyzer 2-2
/-SYS
SYS CM
use of
in fault isolation
Writing I/O Driver 3-23
SYSCM pointer
$CRAVL
Writing I/O Driver 3-28
Writing 1/0 Driver 3-24, 3-27
$HEADR
$PKAVL
Writing I/0 Driver 3-28
Writing I/O Driver 3-23, 3-27
$STKDP
$TKTCB
Writing I/O Driver 3-24, 3-27

Index-283

MASTER INDEX
<SYSDEV> symbol
SYSGEN
Autoconf ig ure
DCL
definition
determining number of RK05s
independent command files
indirect command files
introduction to
minimum requirements
operating enviroments
on-1 ine
stand-alone
overview
performing on RLOls and RL02s
phase
Phase I
Phase II
Phase III
planning suggestions
PREPGEN
See also MCR inhibit
Phase I
Phase II
question
format
logical order
restriction
on-line V4 .1
Standard Function System
terminology
using V4.0 saved answer files
V4.l on V3.2 host system
SYS LIB
including contribution in map
replacing as default
SYSLIB.OLB
for symbol definition
SYSLOGIN.CMD file
SYSTB file
creation of
by SYSGEN
System
baseline
boo table
booting
restriction
valid device
virgin
bootstrapping

MCR Operations 4-14
System Generation (llM)
System Management 12-2
System Generation (llM)
Release Notes 1-22
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
Release Notes 1-22
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)

3-1
3-5
3-5
1-1
1-1, 4-2
2-3
2-3
2-3
1-2
3-1
4-1
5-1
7-1
1-1
3-11

System Generation (llM) 4-4
System Generation (llM) 5-4
System Generation (llM) 3-5
System Generation (llM) 3-7
Release Notes 1-22
System Generation (llM) 3-11
System Generation (llM) 1-3
Release Notes 1-22
Release Notes 1-21
Task Builder 10-26
Task Builder 10-23
Command Language 6-40, 6-81
Program Development 1-11
Task Builder 2-7
Command Language 3-4
Writing I/O Driver 3-1

command file

requirements
DB-based
bootstrapping
device
default
writing hardware boot block
directive
directives
displaying
information
OM-based
bootstrapping

System Generation (llM) 1-5
MCR Operations 3-23
MCR Operations 3-23
MCR Operations 3-24
MCR Operations 3-23
MCR Operations 3-24
System Management 10-41
MCR Operations 3-57
MCR Operations 3-58
Release Notes 1-34
MCR Operations 2-2
MCR Operations 3-159
Program Development 1-9 to 1-10
System Generation (llM) 4-36
System Generation (llS) 2-22
Release Notes 1-34

'----...:1
.un-uc:a
;::,cu
9-\.'I"'\

bootstrapping

3-16

Release Notes 1-34
Index-284

MASTER INDEX
System (Cont.)
file naming
convention
file types
group
host
host and target
image
file
configuring
determining m1n1mum size
Executive data space and
foreign
writing
saved
maximum size of
writing
supported device
interactive
library
contributions (in map)
macro (RSXMAC.SML)
contents
search
object (SYSLIB.OLB)
contents
search
logging in
logging out
management
mapped
physical and virtual space
multiuser
multiuser protection
login
disabling
enabling
multiuser setup
object module library
See also Library
See also SYSLIB.OLB
on-line
operating
real-time
saved
rebooting
saving
requirement
restriction
supported device
valid device
shutdown task
See SHUTUP
stand-alone
statistics display
RMD
target

System Management B-4
System Management B-5 to B-6
MCR Operations 2-3
System Generation (llS) 1-2
System Generation (llM) 1-6
Task Builder C-1
MCR Operations 3-157
System Management 10-1
MCR Operations 3-157
System Management 10-2
System Management 10-4
System Management 10-41
MCR Operations 3-157
System Management 10-40
System Management 10-40
Introduction 1-1, 5-3, Gloss-18
Program Development 4-7
Program Development 1-5, 1-9 to
1-10
Program Development 1-9
Program Development 1-5, 1-10,
2-7
Program Development 1-11
Program Development 1-11
Program Development 1-11, 4-2
MCR Operations 3-57
MCR Operations 3-31
System Management 1-1
System Generation (llM) 1-5
Executive 3-2
Task Builder 2-14
Task Builder 2-15
Introduction 5-1
MCR Operations 3-184
System Management 10-51
MCR Operations 3-184
System Management 10-51
System Generation (llM) 6-8, 6-18
Task Builder 2-2
System Generation (llM) 1-6
Introduction 1-1, 4-1, 5-1, 5-4,
Gloss-23
Introduction 5-1, 5-6, Gloss-28
MCR Operations 3-159
MCR Operations 3-157
System Management 10-40
MCR Operations 3-158
MCR Operations 3-157
System Management 10-40
MCR Operations 3-157
System Generation (llM) 1-6
System Management 6-12A
System Generation (llM) 1-6
Index-285

MASTER INDEX
System
target (Cont.)
memory management
task

Task Builder 10-27
Introduction 1-11, Gloss-32
Program Development 1-1

time
setting
UIC
specifying

System Generation (llS) 2-21

unmapped
correction to multiuser MCR
virgin
System Common
See SYSCM
System common
active task
alphabetized
boot device
labels
network UIC
partition address
stack depth
system size
TCB address
UIC
System common dump
alphabetized
System data structure macro
AST control block
clock queue control block
device control block
driver dispatch table
error message block
hardware register addresses
interrupt transfer block
logical assignment control
block
magtape volume set control
block
partition control block
status control block
task abort codes
task control block
task header
TKTN message codes
unit control block
volume control block
System data structure macro
definition
ABODF$
CLKDF$
DCB OF$
EPKDF$
FllDF$
HDRDF$
HWDDF$
ITBDF$
LCBDF$
MTADF$
PCB OF$
PKTDF$
SCBDF$
TCBDF$
UCBDF$

MCR Operations 3-200
System Management 10-61
System -Generation (llM) 1-5
Task Builder 2-14
Release Notes 1-35
System Generation (llM} 1-6, 6-1
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-9
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-9
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-6
Crash Dump Analyzer 3-1
Crash Dump Analyzer 3-1
Crash Dump Analyzer B-33
Crash Dump Analyzer B-4
Crash Dump Analyzer B-6
Crash Dump Analyzer B-6
Crash Dump Analyzer B-7
Crash Dump Analyzer B-22
Crash Dump Analyzer B-25
Crash Dump Analyzer B-26
Crash Dump Analyzer B-27
Crash Dump Analyzer B-31
Crash Dump Analyzer B-38
Crash Dump Analyzer B-3
Crash Dump Analyzer B-40
Crash Dump Analyzer B-20
Crash Dump Analyzer B-3
Crash Dump Analyzer B-43
Crash Dump Analyzer B-15
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing
Writing

Index-286

I/O Driver C-1
I/O Driver C-3
I/O Driver C-4
I/O Driver C-6
I/O Driver C-7
I/O Driver C-14
I/O Driver C-19
I/O Driver C-21
I/O Driver C-24
I/O Driver C-25
I/O Driver C-26
I/O Driver C-30
I/O Driver C-32
I/O Driver C-37
I/O Driver C-39
I/O Driver C-42

MASTER INDEX
System date

Command Language 2-1, 8-1 to 8-2,
9-31, 9-37
Crash Dump Analyzer 2-4

System device switch
System directive
summary
System directory

I/O Operations C-1 to C-3
Command Language 6-41, 7-7 to 7-9,
7-27, 8-5

System disk
RMSBCK utility
RMSRST utility
System failure
r~storing edits after
simulating
System generation

RMS-11 Utilities 6-1
RMS-11 Utilities 7-1
EDT Editor 3-2
EDT Editor 3-2
Introduction 5-3, Gloss-32

Crash Dump Analyzer 1-1

CDA and
incorporating driver
Phase 1
Phase 2
System Generation and
Installation Guide
note to
technical changes
System image
See also SYSVMR.CMD
booting
paper tape
bootstrapping
down-line loading
using DECnet-11
saving
paper tape
using VMR
transporting
System Image Preservation program
See SIP
System information dump
System information switch
System library
System Library Routines Refenence
Manual
note to
System Macro Library
See also .MCALL directive
System Management Guide
note to
VMR
technical changes
System pool switch
SYSTEM SERVICE MESSAGE command
See also SSM command
System state register convention
System task
Basic MCR
building
display program
OTL
RSDV05
RSDVlH
RSDV52
SIP
TKTN

Writing I/O Driver 3-1
System Generation (llS) 1-2
System Generation {llS) 1-2
Release Notes 1-48
Release Notes 1-6
System Generation (llS) 2-16
System Generation {llS) 2-17
System Generation {llS) 4-14
System Generation
System Generation
System Generation
System Generation
System Generation

(llS)
(llS)
{llS)
(llS)
{llS)

4-14
2-14
2-17
4-14
2-16

Crash Dump Analyzer 1-5
Crash Dump Analyzer 2-5
Introduction 4-11, Gloss-18,
Gloss-32
Command Language 8-4
Release Notes 1-54
Executive 1-5
PDP-11 MACR0-11 1-1

Release Notes 1-54
Release Notes 1-18
Crash Dump Analyzer 2-5
MCR Operations 3-212
Writing I/O Driver 5-1
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation
System Generation

Index-287

{llS}
(llS)
(llS)
(llS)
{llS)
(llS)
{llS)
(llS)
(llS)

1-1
4-5
1-1
1-1
1-1
1-1
1-1
1-1
1-1

MASTER INDEX
System Task Directory
See STD
System task directory dump
System task directory switch
System time
System-controlled partition
conventions
definition
extending memory for task in
fragmentation
causes of
subparti tions of
waiting tasks
<SYSTEM> symbol
/SYSUIC keyword
SET command
VMR
<SYSUIC> symbol
SYSVMR.CMD
creating partition structure
creating RMS partitions
description
edit
on mapped systems
on unmapped systems
restriction
<SYUNIT> symbol
/SZ switch
LBR utility

Crash Dump Analyzer 3-44
Crash Dump Analyzer 2-5
Command Language 2-1, 8-1 to 8-2,
9-31, 9-37
System Management 14-1
System Management 14-2
System Management 14-2
Task Builder 11-15
System Management 14-3
System Management 14-2
System Management 14-2
MCR Operations 4-11
MCR Operations 3-200
System Management 10-61
MCR Operations 4-14
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
System Generation (llM)
MCR Operations 4-11

5-14
5-19
3-4
5-14
5-14
5-17
3-4

Utilities 10-30

T
T error
summary
/T switch
T-bit trace trap
TAll
Tab
adjusting level of
CONTROL key
hardware horizontal
specifying
key
keypad editing
setting parameters of
setting position of
tab adjust
TAB command
tab compute
Tab decrement
Tab increment {TI)
vertical
TAB key
TAB ON/OFF command
EDI editor
Table
definition
revector control in RCT
status codes
RPT use
symbol
Table Driven Parser
See TPARS
Table of contents
sample listing

PDP-11 MACR0-11 3-15, 5-10, 6-23
PDP-11 MACR0-11 D-4
Error Logging 3-7, 3-9
Task Builder 10-50
I/O Drivers 9-1
EDT Editor 5-53, 8-23
EDT Editor 5-53
MCR Operations 3-181
System Management 10-50
MCR Operations.2-16
EDT Editor 5-53
EDT Editor 9-8
EDT Editor 8-21, 8-24
EDT Editor 8-22
EDT Editor 8-21
EDT Editor 8-23
EDT Editor 8-24
EDT Editor 8-24
Command Language 3-22
Command Language 3-22
Utilities 2-46
Error Logging 5-36
System Management 5-2
Error Logging 5-36
Introduction 4-6
I/O Operations 7-1
PDP-11 MACR0-11 6-16
Index-288

MASTER INDEX
Table of contents (Cont.)
text generation
TABLE statement
Table storage
memory for
to improve performance
TADJ command
/TAL
TAL command
Basic MCR
command line format
example
Tape
See also Medium

PDP-11 MACR0-11 G-15
Error Logging 5-37
Task Builder F-2
Task Builder F-2
EDT Editor 8-22
Crash Dump Analyzer 2-2
MCR Operations 3-214
System Generation (llS) 2-4
MCR Operations 3-214
MCR Operations 3-214

backing up

BRU utility
backup
restriction with BRU
comparing
DSC utility
conventional backup
BRU utility
copying
BRU utility
data transfer
DSC utility
formatting
FLX utility
full backup
BRU utility
mounting
BRU utility
restoring
BRU utility
selective backup
BRU utility
setting block size
PIP utility
verifying
VFY utility
Tape mark

Utilities 7-1
Release Notes 1-35
Utilities 8-14
Utilities 7-4
Utilities 7-1
Utilities 8-26
Utilities 4-4
Utilities 7-3
Utilities 7-2
Utilities 7-1
Utilities 7-3
Utilities 3-15

Tape set
mounting
Tape versus disk
/TAPE LABEL qualifier
BRU-utility
TARGET
RMSDES utility
Target system
creating a backup copy
definition
installing layered products in
saving
nonstanard unmapped
test with UETP
transfering task to a
transferring to different type
of disk
/TAS
TAS command
command line format
error message
example
keyword
/DEV

Utilities 9-1
I/O Operations G-16
RMS-11 Introduction 2-5
Command Language 5-38 to 5-40
Introduction 5-12
Utilities 7-21
RMS-11 Utilities 2-30
Task Builder C-1
System Generation (llM)
System Generation (llM)
System Generation (llM)
6-19
System Generation (llM)
System Generation (llM)
System Generation (llM)
Task Builder C-1

6-9, 6-19
1-6
6-12,
6-2
6-13
6-5, 6-15

System Generation (llM) 6-6, 6-15
Crash Dump Analyzer 2-2
MCR Operations 3-215
MCR Operations 3-215
MCR Operations 3-216
MCR Operations 3-215
MCR Operations 3-215

Index-289

MASTER INDEX
TAS command (Cont.)
VMR
command line format
example
/TASK
Task

abort
aborting
message
using PMT
access
system-owned common or
library
user-owned common
user-owned library
active

aborting
display
altering from MCR
displaying
information
displaying
testing
active files
declaring number of
additional memory for
address
accessing
contents
changing
displaying
relative
accessing
address windows
declaring an additional
ancillary control processor
specifying as
application
assembling
assigning physical device to
LUN
attached
attaching slave attribute to
blocked

blocking
breakpoints
setting
building
description
nonprivileged
building for target system
canceling
catchall

System Management 10-70
System Management 10-70
System Management 10-70
Crash Dump Analyzer 2-2
Introduction 4-1, 4-3, 4-6 to 4-7,
4-11, 5-10, Gloss-32
Command Language 7-1
MCR Operations 2-19
Program Development 4-8
Introduction 4-15
MCR Operations 3-3
System Generation (llS) 2-18
System Management 13-7 to 13-9,
13-11 to 13-12
Task Builder 11-11
Task Builder 11-28
Task Builder 11-28
Introduction 1-20 to 1-21, 4-13,
5-7, Gloss-2, Gloss-33
Command Language 7-1, 7-55 to
7-57
MCR Operations 2-23
MCR Operations 3-31
System Management 6-9
MCR Operations 3-11
MCR Operations 3-19
MCR Operations 4-39
Task Builder 11-6
Task Builder 11-15
MCR Operations 3-135
MCR Operations 3-135
MCR Operations 3-135
MCR Operations 3-137
Task Builder 11-39
Task Builder 10-5
Introduction 5-2, Gloss-3
System Generation (llS) 1-2
Task Builder 11-7
MCR Operations 2-14, 2-18
Task Builder 10-44
Introduction 5-7, Gloss-5,
Gloss-33
Command Language 7-23 to 7-26,
9-44
MCR Operations 3-22
Program Development 5-6
System Generation (llS) 2-9
Program Development 4-1, 7-6
System Generation (llM) 6-5
System Generation (llM) 7-2
Task Builder C-1
MCR Operations 3-33
System Management 10-11
MCR Operations 3-149
Index-290

MASTER INDEX
Task (Cont.)
changing name of
checkpointable
specifying
checkpo inting
CL!
installing

Task Builder 11-34
System Generation (llS) 2-9
Task Builder 10-10
MCR Operations 2-20

removing
clock queue
displaying
command line
passing
command line to build a
compiling
conventional
autoload vector
correcting
creating
creating a dynamic region
data
in task image
needed by system to install
debugging
declaring
execution priority for
maximum stack size of
number of LUNs for
object-level patch for
ODT SST vector in
default conditions
detaching
disk image
disk-overlaid
display
displaying
information
dormant

testing
dumping
enabling
postmortem dump for
T-bit trace trapping in
executable
execution termination
exiting
extend
extending
a program section in a
maximum size
specifying
memory of
to partition length
external header
specifying
fixing

MCR Operations 3-95
System Management 10-22
System Management 10-35
MCR Operations 3-42
MCR Operations 3-152
Task Builder 1-2
System Generation (llS) ,J.-.G""
Task Builder B-17
Program Development 4-9
MCR Operations 2-21
Task Builder 5-40
Task Builder B-4 to B-6
Task Builder B-1
Program Development 4-9, 7-7 to
7-9
Task Builder 11-27
Task Builder 11-32
Task Builder 11-37
Task Builder 11-5
Task Builder 11-24
Program Development 4-4 to 4-5,
4-7 to 4-8
MCR Operations 2-18
Task Builder 2-8
System Generation (llS) 2-9
System Management 6-8
System Generation (llS) 2-22
Introduction 5-7, Gloss-11,
Gloss-33
Command Language 7-1
MCR Operations 2-23
MCR Operations 4-39
MCR Operations 3-96
System Management 10-23
Task Builder 10-32
Task Builder 10-50
RMS-11 User's Guide 8-1
System Management 4-23
MCR Operations 2-18
Executive 5-73
MCR Operations 3-95, 3-152
System Management 10-22
Task Builder 11-14
MCR Operations 3-187
System Management 10-53
Task Builder 11-15
Task Builder 11-15
Task Builder 10-52
System Generation (llS) 2-9, 4-10
MCR Operations 3-53
System Management 10-18

Index-291

MASTER IHDEX
Task
fixing (Cont.)
restriction

MCR Operations 3-53
System Management 10-18

floating point processor in
specifying
format buffer
declaring length of
global relative patch
declaring
global symbol
excluding a
inc 1 ud i ng in
global symbol definition
declaring a
global symbol reference
declaring a
header
allocating additional
{checkpoint) space in
checkpoint area within
controlling creation of
fixed part
space for EAE context
space for floating-point
context
header display

Task Builder 10-18
Task Builder 11-16
Task Builder 11-19
Task Builder 11-21
Task Builder 11-18
Task Builder 11-17
Task Builder 11-20
Task Builder 2-8
Task Builder 10-6
Task Builder B-9
Task Builder 10-20
Task Builder B-11 to B-12
Task Builder 10-16

Task Builder 10-18

RMD

altering from MCR
host to target system
example of transferring
I- and D-space
autoload vector
manual load calling sequence
overlay region vector
patching
identifying partition for
image
file structure
image on disk
non-overlaid
non-overlaid as linked to
library
overlaid
overlaid I- and D-space
including debugging aid {ODT)
in
inhibiting queuing message to
initiation

System Management 6-10
System Management 6-11
Task Builder C-2
Task Builder B-17 to B-18
Task Builder 4-8 to 4-9, 4-11
Task Builder 5-11
Task Builder 11-13
Task Builder 11-25
Task Builder B-1, B-14
Task Builder B-1
Task Builder B-2
Task Builder B-2
Task Builder B-3
Task Builder B-4
Task Builder 10-14
Task Builder 10-35

!OX

EXECUTE command
install-run-remove
naming convention
running
installation
installed
blocking
information
displaying
testing
installed name
declaring

System Management 4-36
MCR Operations 2-23
MCR Operations 3-151
Introduction 4-9 to 4-10, 5-5,
Gloss-17
Command Language 7-57 to 7-58
MCR Operations 2-22
MCR Operations 3-22
MCR Operations 3-214 to 3-215
System Management 10-70
MCR Operations 4-40
Task Builder 11-34

Index-292

MASTER INDEX
Task {Cont.}
installing

System Generation (llS} 2-6, 2-9,
4-10
MCR Operations 2-22, 3-93
System Management 10-20
MCR Operations 3-94
System Management 10-21
System Generation {llS) 4-14
System Generation (llS) 4-14
Task Builder 2-8
Task Builder B-7
Task Builder B-9
Task Builder B-9
Task Builder B-9

checkpointable
using DECnet-11
using VMR
label block
label block 0
label block 1
label block 2
label block 3
linking
to region
to several libraries
list of attributes
loader
loadable
nonresident
logical units
number of
LUNs
reassigning

Task Builder 5-13
Task Builder 11-8 to 11-9
Task Builder 10-37
System Generation (llM) 4-23
System Generation (llM} 4-23
Task Builder 11-37

macro calls
making checkpointable
map
full
linked to a common
standard
mapping
maximum record buffer size
declaring
memory
memory-resident
memory-resident overlaid
memory-resident overlay
operator
enabling
memory-resident overlay segment
changing alignment of
multi segment
global symbol resolution
multi user
name
CL!
RSX-llM
naming
convention
nonpr iv ileged
subject to pool use controls
object library routines
ODT vector
overlaid
global cross-reference of
memory savings
segment calls
virtual address space
overlay
overmapping I/0 page
parallel execution of
initiating

MCR Operations 3-143
System Management 10-32
Program Development 6-3 to 6-4
Task Builder 10-6
Program Development 4-5
Program Development 4-7
Task Builder 5-24
Program Development 4-5 to 4-6
Task Builder 2-15, 2-20
Task Builder 11-23
Task Builder 2-10
Introduction 5-7, 5-9, Gloss-2
System Generation (llS) 2-9
Task Builder 10-34
Task Builder 10-8
Task Builder 3-5
Task Builder 3-17
Command Language 6-73
Introduction 1-20
Command Language 7-2 to 7-3, 7-5
System Management 11-4
Command Language 7-4
MCR Operations 3-97, 3-154
System Management 10-25
MCR Operations 2-21
System Management 13-5, 13-13
Program Development 6-6
Task Builder 11-24
Task Builder 3-7, 3-9
Task Builder 4-12 to 4-14
Task Builder 3-9 to 3-10
Task Builder 3-10
Task Builder 3-10
Task Builder 2-10
MCR Operations 3-95, 3-153
System Management 10-22
MCR Operations 4-55

Index-293

MASTER INDEX
Task (Cont.)
partition
declaring
patching of
with object code
priority
base
changing
specifying
privileged
See also Privileged task
change to code and data
structure
changes to Executive code
changes to Executive data
structures
changes to I/O data
structures
debugging
specifying
specifying a
privileged access right for
establishing
program section order
effect in creating
prompt
ready-to-run
rebuilding user-written
region
relocation of
removal
removing
requesting
rescheduling
resident common
system-owned
resident library
system-owned
running

checkpointable
scheduling
shareable
single segment
size
slave
specifying a
slaved
specifying
specifications
multiple
soecifvinq
• KEll:A

SST
SST vector address

Task Builder 11-25
Task Builder 11-5
MCR Operations 2-20
System Management 13-5, 13-13
MCR Operations 3-15
System Management 10-8
MCR Operations 3-96, 3-154
System Management 10-23
Introduction 5-5, Gloss-25
Task Builder 2-25
Release Notes 1-32
Release Notes 1-32
Release Notes 1-32
Release Notes 1-33
ODT 1-4
Task Builder 2-25
Task Builder 10-33
Task Builder 10-33
Task Builder 10-36, 10-46
MCR Operations 2-14
Introduction Gloss-33
Command Language 7-1
System Generation (llM) 6-7, 6-17
Task Builder 2-18 to 2-20
Task Builder 2-2
Introduction 4-9 to 4-10,
Gloss-28
MCR Operations 3-146
System Management 10-34
MCR Operations 2-21
MCR Operations 3-150
System Management 10-36
Task Builder 11-11
Task Builder 11-11
Introduction 4-2, 4-9 to 4-10
Program Development 4-7 to 4-8,
7-6
MCR Operations 2-23, 3-148
System Management 10-36
MCR Operations 3-152
Command Language 7-12 to 7-15,
7-60, 9-30, 9-37
Command Language 6-73
Task Builder 3-4, 3-8
RMS-11 User's Guide 2-5
Task Builder 10-44
MCR Operations 3-96, 3-154
System Management 10-24
Task Builder 1-5
Task Builder 10-16
Program Development 4-8
Index-294

MASTER INDEX
Task
SST vector address (Cont.)
declaring
stack size
declaring
state
status flag
displaying
list
stopped
structure

Task Builder 11-35
Task Builder 11-32
Command Language 7-1
MCR Operations 3-19
MCR Operations 3-20
Command Language 7-25, 9-43
Task Builder 2-8
RMS-11 User's Guide 1-13
Task Builder 2-8

label block
suspended
continuing
swapping
system

MCR Operations 3-147
MCR Operations 2-20
Introduction 1-11, Gloss-32
Program Development 1-1
System Generation (llS) 1-1
System Generation (llS) 4-5
System Generation (llS) 1-1
System Generation (llS) 1-1
System Generation (llS) 1-1
System Generation (llS) 1-1
System Generation (llS) 1-1
System Generation (llS) 1-1
System Generat1on (llS) 1-1
Program Development 4-7

Basic MCR
building
display program
OTL
RSDV05
RSDVlH
RSDV52
SIP
TKTN
system library contributions
system mapping status of
indicating
terminating
message
termination
See also TKTN
time-based schedule request
declaring UIC for
traceable
specifying a
transfer (starting} address
default
defining
transferring
OTL
transporting
UIC
declaring
specifying

Task Builder 10-26
System Generation (llS) 2-18
Program Development 4-8
Task Builder 11-36
Task Builder 10-50
Program Development 4-3, 4-8
Program Development 2-7
System Generation (llS) 2-7
System Generation (llS) 1-2, 2-6

unattached
unblocking
unfixing
unstopping
use of memory management
user
problems with device drivers
user-written
including
vector address
declaring system SST trap
virtual program section
specifying
window
linking to region
writing

Task Builder 11-36
MCR Operations 3-155
System Management 10-25, 10-37
MCR Operations 2-14
MCR Operations 3-221
MCR Operations 3-222
System Management 10-74
MCR Operations 3-225
Task Builder 2-15 to 2-16
Release Notes 1-31
System Generation (llS) 4-10
Task Builder 11-35
Task Builder 11-38
Task Builder 2-20 to 2-22

Task Builder 5-15
System Generation (llS) 1-2

Index-295

MASTER INDEX
Task builder

See also Linker
See also TKB
and optimizations
and overlay structure
and remote access code
and RMS-11 routines
and RMSRES
ASG directive
command line
fast
See Fast Task Builder
function
option
PAT utility
switch
Task Builder Manual
note to
technical changes
TASK command
RMD
Task Control Block
See TCB
Task Control Block switch
Task data space dump
Task data space switch
Task dump
window blocks
Task execution
abort
begin
continuing
resuming
RSX-llM-PLUS feature
Task Exit directive
Task header
mapped system
role of
in I/O data structure
unmapped system
Task header dump
directive status word
file control block
logical unit table
page descriptor register
swapping priority
window blocks
Task header switch
Task image
creating
file
Task image file
patching
ZAP utility
Task instruction space dump
Task instruction space switch
/TASK keyword
INSTALL command
VMR
OPEN command

Co11111and Language 9-23 to 9-24
Introduction 4-7, 4-9, 4-11,
Gloss-3, Gloss-32
I/O Operations 2-41
RMS-11 user's Guide 1-13
RMS-11 user's Guide 8-10
RMS-11 user's Guide 8-10
RMS-11 User's Guide B-1
RMS-11 User's Guide 8-1
RMS-11 User's Guide 8-6
I/O Operations 6-13
Task Builder 1-2
Task Builder 2-1
Task Builder 1-4
Utilities 14-4
Task Builder 10-1
Release Notes 1-57
Release Notes 1-16
System Management 6-9, 6-11
Crash Dump Analyzer 2-3
Crash Dump Analyzer 3-54
Crash Dump Analyzer 2-5
Crash Dump Analyzer 3-48
Crash Dump Analyzer 3-48
ODT 1-5
ODT 2-9, 3-2
ODT 2-10, 3-2
ODT 1-5 to 1-6, 3-2
ODT 2-9
Executive 5-69
Writing I/O Driver 3-25
Writing I/O Driver 2-19
Writing I/O Driver 3-24
Crash Dump Analyzer 3-28
Crash Dump Analyzer 3-28
Crash Dump Analyzer 3-29
Crash Dump Analyzer 3-28
Crash Dump Analyzer 3-29
Crash Dump Analyzer 3-28
Crash Dump Analyzer 3-29
Crash Dump Analyzer 2-4
Introduction 4-3
Program Development 1-6, 4-1, 7-6
Program Development 4-1 to 4-2,
7-5 to 7-6
Introduction 2-1, 4-3, 4-8, 4-14,
Gloss-33
Utilities 15-1
Crash Dump Analyzer 3-54
Crash Dump Analyzer 2-6
MCR Operations 3-97
System Management 10-25
MCR Operations 3-137
Index-296

MASTER INDEX
/TASK keyword (Cont.)
RUN command
Task Level

MCR Operations 3-154
Executive 5-18
OD'!' 5-1

TASK option
Task parameter buffer format
Task state
active
active blocked
active ready-to-run
active stopped
transition
Task state transition
active to dormant
blocked to ready-to-run
blocked to stopped
dormant to active
ready-to-run to blocked
ready-to-run to stopped
stopped to blocked
stopped to reacy-to-run
Task status flag
/TASK subkeyword
CL! command
Task termination notification
See also TKTN
Task virtual address space switch
Task-build
Task-build command file

Introduction 4-13 to 4-15
Task Builder 11-34
Executive 5-97
Introduction Gloss-33
Executive 1-9
Executive 1-10
Executive 1-10
Executive 1-10
Executive 1-10
Executive 1-10
Executive 1-11
Executive 1-11
Executive 1-11
Executive 1-10
Executive 1-10
Executive 1-11
Executive 1-12
Executive 1-11
Command Language 7-48
MCR Operations 3-39
Executive 5-8
Crash Dump Analyzer 2-5
Command Language 6-1, 6-62 to
6-86, 6-88 to 6-89

RMD

modifying
Task-build file
location of !OX
Task/File Patch Program
See ZAP utility
TASKLIST command
VMR
TASKLIST-ATL command
/TB switch
CMP utility
PIP utility
TC command
TCll-G
/TCB
TCB
pointer to
TCBDF$
TD command
/TD switch
PIP utility
/TDS
TDX
TE trap
TECO editor
Teleprinter listing format
See also Listing control
Teletype

System Management 6-12C
System Management 4-22
MCR Operations 3-215
System Management 10-70
MCR Operations 3-214
Utilities 12-3
Utilities 3-26
EDT Editor 8-23
I/O Drivers 6-1
Crash Dump Analyzer 2-2
Introduction 4-9, Gloss-17,
Gloss-33
MCR Operations 3-93
Crash Dump Analyzer 3-20
Crash Dump Analyzer B-40
EDT Editor 8-24
Utilities 3-40
Crash Dump Analyzer 2-2
Release Notes 1-24
CDT 1-5 to 1-6
Command Language 4-21 to 4-22,
9-16
PDP-11 MACR0-11 6-7 to 6-8
I/O Drivers 2-3, 3-2

Index-297

MASTER INDEX
Temporary file
See also FB$TMP mask in FOP field
I/O Operations 3-11
creating
deleting
1/0 Operations 4-23
marking
for deletion
I/O Operations 3-12
1/0 Operations 3-11
opening
Temporary Radix-SO operator
PDP-11 MACR0-11 6-30
TEMPORARYFILE command
System Management 4-61
IOX
$TERM
predefined syntax element in
System Management 12-44
MML
Term
PDP-11 MACR0-11 3-15 to 3-16
definition of
/TERM keyword
MCR Operations 3-11
ACTIVE command
MCR Operations 3-12
ALLOCATE command
ASSIGN command
MCR Operations 3-17
MCR Operations 3-201
SET command
System Management 10-62
VMR
Terminal
Introduction 1-1, 1-6, 1-9, 1-18
to 1-19, 4-1, 4-13, 5-2, 5-10,
Gloss-33
MCR Operations 2-13
RMS-11 Macros 3-1, 5-20, 5-37,
5-42, 5-77, 5-88, 5-104,
5-111, 5-117
See also VT52 or VTlOO
attached
Command Language 3-2
MCR Operations 2-18
attaching
I/O Drivers 2-12 to 2-13
attributes
Command Language 2-2 to 2-3, 3-2,
3-33 to 3-54, 9-35
baud rate
specifying
MCR Operations 3-198
System Management 10-59
characteristics
Command Language 2-2 to 2-3, 3-2,
3-33 to 3-54, 9-35
CLI
default
specifying
MCR Operations 3-174
MCR Operations 3-31
resetting
control character
I/O Drivers 2-27 to 2-29
controlling operation
MCR Operations 2-14
CRT
specifying
MCR Operations 3-174
System Management 10-48
current line
deleting
MCR Operations 2-17
retyping
MCR Operations 2-17
DCL
specifying
MCR Operations 3-175
dedicated
MCR Operations 2-19
desk-top
I/O Drivers 2-3
I/O Drivers 2-8, 3-5 to 3-6, 3-8
device-specific QIO
escape sequence
I/O Drivers 2-29
I/O Drivers 2-13
escape sequence recognition
examining a listing
Program Development 3-6 to 3-7
I/O Drivers 2-14
full-duplex
I/O Drivers 2-38
full-duplex operation
I/O Drivers 2-5
graphics
half-duplex
I/O Drivers 3-1
hard-copy
Introduction 1-1, 1-9, 5-9,
Gloss-16
hardcopy
EDT Edi tor 9-12
input
Index-298

MASTER INDEX
Terminal
input (Cont.)
prompt
solid ted
terminating
unsolicited
interface
local
specifying

MCR Operations 2-13
.....
Vl-ICL Cl 1...1.VUiO L-..Loz
MCR ""'----.Lo:--MCR Operations 2-15
MCR Operations 2-14
I/O Drivers 2-39
,

MCR Operations 3-194
System Management 10-58

logged-in
displaying
MCR
specifying
message
sending
time limit
model

MCR Operations 3-46
MCR Operations 3-189
MCR Operations 3-27
MCR Operations 3-27
Command Language 2-2 to 2-3, 3-2,
3-33 to 3-54, 9-35
Command Language 3-1

number
option
autobaud detection
backwards deletion
8-bit character
broadcast
echo
eight-bit character
escape-sequence recognition
fill characters
vertical
full-duplex
hardware
form feed
horizontal tab
hold-screen mode
read-pass-all
typeahead
wrap-around
output
controlling
resuming
suppressing
suspending
paging
portable
privilege
specifying
status
privileged
QIO subfunction bit
remote
baud rate

MCR Operations 3-171
System Management 10-46
MCR Operations 3-174
System Management 10-48
MCR Operations 3-176
MCR Operations 3-172
System Management 10-48
MCR Operations 3-177
System Management 10-49
System Management 10-48
MCR Operations 3-178
System Management 10-49
MCR Operations 3-181
System Management 10-50
MCR Operations 3-206
System Management 10-64
MCR Operations 3-179
System Management 10-49
MCR Operations 3-180
System Management 10-50
MCR Operations 3-181
System Management 10-50
MCR Operations 3-182
MCR Operations 3-195
System Management 10-58
MCR Operations 3-204
System Management 10-64
MCR Operations 3-208
System Management 10-65
Program Development 3-7
MCR Operations 2-16 to 2-17
MCR Operations 2-16
MCR Operations 2-17
MCR Operations 3-184
I/O Drivers 2-3
MCR Operations 2-6
MCR Operations 3-191
System Management 10-57
MCR Operations 2-18
Introduction 5-5, Gloss-25
I/O Drivers 2-9
MCR Operations 3-193

Index-299

MASTER INDEX
Terminal
remote
baud rate (Cont.)
specifying

MCR Operations 3-193
System Management 10-57
System Management 10-57
I/O Operations 4-18
Introduction 5-2, Gloss-30
Command Language 3-41
Command Language 3-2
MCR Operations 2-19
System Management 6-2
MCR Operations 3-197
System Management 10-59
I/O Drivers 2-30 to 2-31
I/O Drivers 3-2
I/O Drivers 2-7
I/O Drivers 2-23 to 2-27
I/O Drivers 3-7, 3-9
I/O Drivers 2-11
I/O Drivers 2-3

specifying
rewinding file open on
slave
slaved
running RMD on
specifying
special key
standard interfaces
standard QIO function
status return
subf unction
subfunction summary
teletype
text
deleting
displaying
type
half-duplex

MCR Operations 2-15
MCR Operations 4-23 to 4-24, 4-26
I/O Drivers 2-17
MCR Operations 3-201
System Management 10-62
MCR Operations 3-201
System Management 10-62
MCR Operations 3-201
System Management 10-62

specifying
standard
typeahead
buff er
clearing
types
UIC
specifying

MCR Operations 2-18
Program Development 1-12

unattached
unit number
using SHOW TERMINAL command
video
Terminal argument indicator
Terminal characteristics
setting
side effects
Terminal device
See also FB$TRM mask in DEV field
Terminal driver
loadable
options
Terminal expression indicator
Terminal keyboard
Terminal keypad
Terminal line truncation
Terminal register indicator
Terminating
RMSBCK utility
RMSCNV utility
RMSDEF utility
RMSDES utility
RMSDSP utility
RMSIFL utility
processing
RMSRST utility
Terminating directive
See .END directive

MCR Operations 3-205
System Management 10-64
MCR Operations 2-18
MCR Operations 2-21
EDT Editor 9-17
Introduction 1-1, 1-9, 5-9
PDP-11 MACR0-11 3-2
I/O Drivers 2-13 to 2-15
I/O Drivers 2-21
I/O Drivers 2-41, 3-32
RMS-11 User's Guide A-1
I/o· Drivers 3-33
System Generation (llM) 4-46
PDP-11 MACR0-11 3-2
Command Language 3-1, 3-11
Command Language 3-1, 3-17
I/O Drivers 3-30
PDP-11 MACR0-11 3-2
RMS-11 Utilities 6-2
RMS-11 Utilities 4-4
RMS-11 Utilities A-5
RMS-11 Utilities 2-2, 2-9, 2-12
RMS-11 Utilities 5-2
RMS-11 Utilities 3-2
RMS-11 Utilities 3-12
RMS-11 Utilities 7-2

Index-300

MASTER INDEX
Terminator
stream records

RMS-11 Introduction 3-4
RMS-11 User's Guide 2-16

Test configuration
IOX

pattern altering
pattern displaying
setup
.TEST directive
example
format
$TESTBITS macro
.TESTDEVICE directive
example
format
.TESTFILE directive
example
format
.TESTPARTITION directive
example
format
Text
buff er
deleting
displaying
editor
See also EDI editor, EDT
editor
file
Text buffer
automatically created
copying files from
copying files into
creating additional
deleting contents of
for inserting text
for moving entity
listing
MAIN
moving cursor throughout
PASTE
range specification
restriction
rules for naming
use of
Text Editor and Corrector
See TECO editor
Text entity
Text information record
format
Throughput
improving TKB
THRU
range specification
$TI
predefined syntax element in
MML
TI command
TI:
Pseudo device
<TICLPP> symbol
<TICWID> symbol
%TIM
$TIM (Time conversion)
$TIME
predefined syntax element in
MML

System Management 4-46
System Management 4-46
System Management 4-6
MCR Operations 4-51
MCR Operations 4-52
MCR Operations 4-51
RMS-11 Macros 2-1 7
MCR Operations 4-52
MCR Operations 4-53
MCR Operations 4-52
MCR Operations 4-53
MCR Operations 4-54
MCR Operations 4-53
MCR Operations 4-54
MCR Operations 4-54
MCR Operations 4-54
Program Development 1-3
MCR Operations 2-15
MCR Operations 4-23 to 4-24, 4-26
Program Development 1-3 to 1-4
Introduction Gloss-33
EDT Editor 1-2
EDT Editor 6-6
EDT Editor 7-13, 7-22
EDT Editor 7-10
EDT Editor 6-6
EDT Editor 7-2
EDT Editor 2-32, 7-11
EDT Editor 8-7
EDT Editor 9-15
EDT Editor 1-2, 2-1, 6-5
EDT Editor 5-20
EDT Editor 1-2, 2-1, 6-5
EDT Edi tor 6-11
EDT Editor 6-6
EDT Editor 6-6
EDT Editor 2-1
EDT Editor 8-2
Task Builder A-11 to A-12
Task Builder A-12
Introduction 5-2, Gloss-34
Task Builder F-1
EDT Editor 2-30, 6-10
System Management 12-45
EDT Editor 8-24
Command Language 5-6
MCR Operations 4-11
MCR Operations 4-12
Error Logging 5-25
System Library 6-3
System Management 12-42
Index-301

MASTER INDEX
Time
displaying
of IOX exercise
setting
system
setting
Time buffer format
TIME command
Basic MCR
command line format
example
VMR
command line format
example
Time conversion
time ($TIM)
Time handling function
Time sharing
Time-synchronized initiation
requests
<TIME> symbol
Timeout
count
mode
<TIMOUT> symbol
/TIS
<TISPED> symbol
.TITLE directive
<TITYPE> symbol
TKB
See also Task Builder
/CR
/CROSS REFERENCE
/DA
data structures
modifications to
/DEBUG
error
/FAST
fast version
GBLPAT option
generating
cross-reference listing
map
full

standard
/INCLUDE
input
/LB
/LIBRARY
LINK command
DCL
linking
ODT
ODTID

supervisor libraries
/LONG

MCR Operations 3-217
System Management 10-72
System Management 4-55
MCR Operations 3-217
System Management 10-72
Comaand Language 2-1, 8-1 to 8-2,
9-31, 9-37
System Generation (llS) 2-21
Executive 5-95
MCR Operations 3-217
System Generation (llS) 2-2
MCR Operations 3-217
MCR Operations 3-218
System Management 10-72
System Management 10-72
System Management 10-72
System Library 6-3
Error Logging 5-25
Introduction 5-2, Gloss-34
Executive 5-51
MCR Operations 4-14
MCR Operations 4-33
MCR Operations 4-33
MCR Operations 4-10
Crash Dump Analyzer 2-2
MCR Operations 4-12
PDP-11 MACR0-11 6-15
Program Development 2-3, 2-5, 6-7
MCR Operations 4-12
Command Language 6-1, 6-62 to
6-89, B-2
Program Development 1-5 to 1-6
Program Development 1-8, 4-6, 5-2
Program Developm·ent 1-8, 4-5, 5-1
Program Development 5-2
Release Notes 1-30
Program Development 5-1
Program Development 4-2, 4-8 to
4-9
Program Development 4-4
Program Development 4-4
ODT 8-2
Program Development 4-5 to 4-6
Program Deveiopment 4-7
Program Development 4-5 to 4-6
Program Development 6-7 to 6-9
Program Development 1-5 to 1-6
Program Development 6-7 to 6-9,
7-8
Program Development 6-8 to 6-9,
7-8
Program Development 1-5, 4-1, 5-1,
5-9, 6-7
ODT 1-2
ODT 1-3
ODT 1-4
Program Development 4-7
Index-302

MASTER INDEX
TKB (Cont.)
Program Development 4-7
Program Development 4-5, 4-7, 5-1,

/MA

/MAP

c_n

..J-::1 t

'--

1..V

t::._n
v-;;

Program Development 4-5
Program Development 4-5

/NOTASK
/NOW IDE
object library
designation
use
options
output
/PM
/POSTMORTEM
search of
default

t::_.,
u- i

Program Development 6-4 to 6-5
Program Development 6-8 to 6-9
Command Language 6-76 to 6-79,
6-86
Program Development 1-6
Program Development 5-9
Program Development 5-9
library

/-SH

slow
to improve performance
specifying
debugger
symbol
undefined
/SYSTEM LIBRARY DISPLAY
/TASK TKB command
MCR
transfer (starting) address
default
UNITS option
/-WI
TKB command
MCR
See also TKB
TKS field in KEY block
DISPLAY operation
off set
OPEN operation
summary
$TKTCB pointer
use of
in fault tracing
TKTN

abort message
building
error message
initiating
size
using with PMD
/TM02 switch
DSC utility
TOC symbolic argument
TOF command
EDI editor
TOP command
EDI editor
TOP function
/TOP keyword
SET command

Program Development 1-11
Program Development 4-7
Task Builder F-11
ODT 8-1
Program Development 4-2
Program Development 4-7
Program Development 5-1, 6-7 to
6-9
Program Development 1-5, 4-1, 5-2,
5-9, 6-7
Program Development 4-3
ODT 6-2
Program Development 4-6
Program Development 1-5, 4-1, 5-2,
5-9, 6-7
RMS-11 Macros 5-31
RMS-11 Macros 6-68
RMS-11 Macros 5-81
RMS-11 Macros 6-93
Writing I/O Driver 3-24
System Generation (llS) 1-1, 2-1,
2-18
System Generation (llM) 4-29
Command Language 7-19 to 7-21
MCR Operations 3-3
Program Development 4-8
System Generation (llS) 4-6
System Generation (llS) 2-19
MCR Operations 3-5, A-1
System Generation (llS) 2-19
System Generation (llS) 1-3
Program Development 1-7
Utilities 8-22
PDP-11 MACR0-11 6-12
Utilities 2-19, 2-47
EDT Editor 8-24
Utilities 2-20, 2-47
EDT Editor 2-9, 5-21
MCR Operations 3-202
Index-303

MASTER INDEX
/TOP keyword
SET command (Cont.)
VMR
TOP OF FILE command
EDI editor
TPARS
calling conventions
options word
programming examples
register usage
subexpressions
/TR keyword
MOUNT command
/TR switch
Indirect
PIP utility
RMSCNV utility
RMSIFL utility
SLP utility
Trace mode
Trace program
listing
format
Track
See also Placement control
TRAN$ macro
Transfer
address
address entry
Transfer (starting} address
defining
system treatment of default
Transfer address, program
Transfer function
processing
Transition
defining
rejecting
Translation
EBCDIC
installation-dependent routines
mag tape
Translation table
EBCDIC
Translator
Translator table
DCL
Transparent
Transparent spooling
Transportability
22-bit systems
Trap
See also SST, AST
AST
handling
SST

system
Tree
applying autoload indicator
calling segments in
calling up-tree segments
multiple
defined
defining

System Management 10-63
Utilities 2-19, 2-47
I/O Operations 7-1 to 7-11, 7-14
I/O Operations 7-12
I/O Operations 7-12
I/O Operations 7-15 to 7-18
I/O Operations 7-12
I/O Operations 7-19
MCR Operations 3-124
Task Builder 10-50
MCR Operations 4-19
Utilities 3-40
RMS-11 Utilities 4-13
RMS-11 Utilities 3-7, 3-11
Utilities 13-15
MCR Operations 4-33
ODT 8-2
ODT 8-2
RMS-11 Introduction 2-1
I/O Operations 7-4
Task Builder A-6
Task Builder A-6
Program Development 2-7
Program Development 4-3, 4-8
PDP-11 MACR0-11 6-39
Writing I/O Driver 4-13
I/O Operations 7-3
I/O Operations 7-6, 7-18
I/O Operations G-17 to G-18
I/O Operations G-17
I/O Operations G-17
I/O Operations G-17 to G-18
Introduction Gloss-34
System Management 12-6 to 12-12,
12-17 to 12-20, 12-46 to
12-47
Introduction 4-2, Gloss-34
System Management 7-1
Release Notes 1-30
ODT 1-5 to 1-6, 2-11, 5-5, A-2
Executive 2-4
ODT 2-11, 5-5
Executive 2-4
Executive 2-4
I/O Drivers 1-12
Task Builder 4-2
Task Builder 4-6
Task Builder 4-6
Task Builder 3-29
Task Builder 3-30

Index-304

MASTER INDEX
Tree
multiple (Cont.)
structure
Tree structure
indexed file organization
.TRLUN
reserved global symbol
.TRNCL
<TRUE> symbol
$TRUNCATE macro
Truncate mode
TRUNCATE operation
and shared access
sequential files
$TRUNCATE macro
Truncating
command
Truncation
byte storage
floating-point
line
EDT editor
print line
RMSCNV utility
RMSIFL utility
terminal line
TRUNCATION argument
Truncation of file
PUT$
/TSK
.TSK file type
$$TSKP
reserved PSECT name
TSKV option
$TST
predefined syntax element in
MML
TST macro
MML
$TSTNOT
predefined syntax element in
MML
TTDRV
LOA special case
TTDRVBLD.CMD
definition
TTM symbolic argument
TU58
Two's complement operator
Two-byte signed integer key
Two-byte unsigned binary key
TYPE
Implied (Null)
line editing
no keypad editing
RMSDES utility
Type
file
TYPE command

DCL

Task Builder 3-18, 3-31
RMS-11 Introduction 3-7
Task Builder E-2
I/O Operations 4-22
MCR Operations 4-10
RMS-11 Macros 5-122
MCR Operations 4-33
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-11
RMS-11 User's Guide 2-6
RMS-11 User's Guide 3-12
RMS-11 Macros 5-122
Introduction 1-12, 2-4
PDP-11 MACR0-11 6-23
PDP-11 MACR0-11 6-34
Introduction 2-16
I/O Drivers 10-7
RMS-11 Utilities 4-13
RMS-11 Utilities 3-7
I/O Drivers 3-30
PDP-11 MACR0-11 8-10
I/O Operations 2-9
Crash Dump Analyzer 2-2
Program Development 4-1
Task Builder E-4
Task Builder 11-35
System Management 12-45
System Management 12-39
System Management 12-45
Writing I/O Driver 3-5
System Generation (llM) 5-1
PDP-11 MACR0-11 6-12
I/O Drivers 7-1
PDP-11 MACR0-11 3-4
RMS-11 User's Guide 6-4
RMS-11 User's Guide 6-5
EDT Editor 7-12
EDT Editor 8-13
RMS-11 Utilities 2-38
RMS-11 User's Guide A-3
EDT Editor 2-22, 2-26, 2-30, 7-20
Introduction 1-12, 1-14, 2-15,
2-17, 3-7
Command Language 4-50 to 4-52,
9-46
Program Development 3-6, 4-6, 7-4
Index-305

MASTER INDEX
TYPE command {Cont.)
EDI editor

Program Development 2-13 to 2-14,
2-17
Introduction 2-4, 2-8, 2-15
EDT Editor 2-22

EDT editor
WHOLE
TYpe command
EDI editor
/TYPE keyword
ALLOCATE command
Type switch
Type-ahead
buffer
clearing
option

Utilities 2-47
MCR Operations 3-12
Error Logging 3-7, 3-9
I/O Drivers 2-37

Type-code
/TYPEAHEAD keyword
SET command
VMR
Typing mistake
Typographical error
correcting with DEL C and UND C

MCR Operations 2-18
MCR Operations 3-204
System Management 10-64
Task Builder 2-5, 2-7
MCR Operations 3-204
System Management 10-64
Introduction 1-8 to 1-9
EDT Editor 5-27

u
U command
U error
marking undefined symbol
summary
UBF field in RAB
CONNECT operation
GET operation
off set
PUT operation
READ operation
summary
UC ON/OFF command
EDI editor
/UCB
UCB
description
figure
negative offset
relationship of
with I/O control blocks
required field
role of
in I/O data structure
with ACP
UCB field
U.ATT
U.BUF
U.CLI
U.CNT
U.CTL
U.CWl
UeCW2
U.CW3
U.CW4
U.DCB
U.ERHC
U.ERHL
U.ERSC

ODT 2-11
PDP-11 MACR0-11 3-8 to 3-9, 3-15,
6-20 to 6-21, 7-20
PDP-11 MACR0-11 6-21
PDP-11 MACR0-11 D-4
RMS-11 Macros 4-7, 4-13
RMS-11 Macros 5-6
RMS-11 Macros 5-61, 5-64, 5-67
RMS-11 Macros 6-115
RMS-11 Macros 5-92, 5-96
RMS-11 Macros 5-98, 5-100
RMS-11 Macros 6-143
Utilities 2-48
Crash Dump Analyzer 2-2
Writing I/O Driver 4-23
Writing I/0 Driver 4-26
Writing I/0 Driver 4-9
Writing I/0 Driver 2-6
Writing I/0 Driver 3-7
Writing I/0 Driver 2-20
Writing I/0 Driver D-9
Writing I/O Driver 3-7, 4-31
Writing I/O Driver 4-31
Writing I/O Driver 4-25
Writing I/0 Driver 4-32, B-1
Writing I/O Driver 2-9, 3-7 I 4-10,
4-27
Wri'ting I/0 Driver 3-7, 4-29
Writing I/0 Driver 3-7, 4-30
Writing I/0 Driver 3-7, 4-30
Writing I/0 Driver 3-7, 4-31
Writing I/O Driver 3-6 to 3-8,
4-9, 4-27
Writing I/O Driver 4-25
Writing IiO Driver 4-24
Writing I/0 Driver 4-24
Index-306

MASTER INDEX
UCB field {Cont.)
U.ERSL
U. IOC

U.LUIC
U.MUP
U.OWN
U.RED
U.SCB
U.ST2
U.STS
U.UNIT
UCBDF$
UDA50
UDC
device-specific QIO
direct access
FORTRAN interface
FORTRAN subroutine summary
standard QIO
status return
UDCll
UETP
console dialog example
environment needed to run
error message
LOGGER.TSK
system configuration module
error messages
NULl.TSK
QTRUN.TSK
error reporting
load test
purpose
requirements for RSX-llM
modules
operating procedures
requirements in RSX-llM
requirements in RSX-llM-PLUS
running
!OX

utilities
structure
test target system
testing
interactive utilities
MCR commands
/UF switch
PIP utility
UFO

allocating space
contents
creating
PIP utility
default
definition
deleting
format
1 i sting file

Writing I/O Driver 4-24
Writing I/O Driver 4-24
Writing I/O Driver 4-25
Writing I/O Driver 4-25
Writing I/O Driver 4-27
Writing I/O Driver 3-7 to 3-8,
4-27
Writing I/O Driver 3-7 to 3-8,
4-31
Writing I/O Driver 3-7, 4-29
Writing I/O Driver 3-7, 4-28
Writing I/O Driver 3-7, 4-29
Crash Dump Analyzer B-43
I/O Drivers 5-4
I/O Drivers 15-1
I/O Drivers 15-3 to 15-9
I/O Drivers 15-10
I/O Drivers 15-15
I/O Drivers 15-17 to 15-31
I/O Drivers 15-3
I/O Drivers 15-32 to 15-34
I/O Drivers 15-1, 18-3
System Management 9-7
System Management 9-3
System Management 9-5
System Management 9-5
System Management 9-5
System Management 9-6
System Management 9-6
System Management 9-4
System Management 9-2
System Management 9-2
System Management 9-1
System Management 9-4
System Management 9-3
System Management 9-3
System Management 9-4
System Management 9-2
System Management 9-2
System Management 9-1
System Generation (llM) 6-5, 6-15
System Management 9-3
System Management 9-3
Utilities 3-41
Introduction 1-13 to 1-14, 3-2,
5-12, Gloss-11, Gloss-34 to
Gloss-35
Command Language 4-1, 5-11, 5-65
MCR Operations 2-2
MCR Operations 3-219
MCR Operations 2-2
Command Language 4-11
MCR Operations 2-2, 3-219
Utilities 3-41
Command Language 4-3, 4-77 to
4-79, 5-72, 9-31
MCR Operations 2-2
System Management B-1
MCR Operations 2-2
MCR Operations 2-2

Index-307

MASTER INDEX
UFO
listing file (Cont.)
PIP utility
name
protecting
system
example
validating
UFO command
command line format
error message
example
keyword
/ALLOC
/PRO
UFO conventions in command line
/UFO qualifier
BRU utility
/UI switch
FLX utility
$UIC
predefined syntax element in
MML
UIC

authorized
contained in account entry
declaring in task
DECnet
default
displaying
distinction by password
option
setting
nonpr iv ileged
privileged
system
task
terminal
UIC conversion
ASC!I to binary
binary to ASCII
/UIC keyword
HOME command
IN! command
INSTALL command
VMR
MOUNT command
RUN command
VMR
SET command
VMR
<UIC> symbol
[uic] switch
QUE /LI command
$UICE
predefined syntax element in
MML
$ULA (Universal library)

Utilities 3-24
MCR Operations 2-2
MCR Operations 3-219
System Management B-3 to B-4
Utilities 9-5
MCR Operations 3-219
MCR Operations 3-219
MCR Operations 3-220
MCR Operations 3-220
MCR Operations 3-219
MCR Operations 3-219
Task Builder 1-9
Utilities 7-21
Utilities 4-8
System Management 12-42
Introduction 1-13 to 1-14,
Gloss--35
Command Language 3-3 to 3-4, 4-2
MCR Operations 2-5
System Management 2-1
System Management 2-1, 2-5, 2-7
Task Builder 11-36
MCR Operations 3-189
System Management 10-53
I/O Operations 4-4
MCR Operations 3-205
System Management 10-64
System Management 2-4
System Management 2-1
Task Builder 11-36
System Generation (llM) 4-2
MCR Operations 2-6
MCR Operations 2-6
MCR Operations 3-200
System Management 10-61
MCR Operations 3-155
System Management 10-25
MCR Operations 3-205
System Management 10-64
I/O Operations 4-7
I/O Operations 4-7
MCR Operations 3-74
MCR Operations 3-84
System Management 10-25
MCR Operations 3-124
MCR Operations 3-148, 3-155
System Management 10-37
MCR Operations 3-205
System Management 10-64
MCR Operations 4-14
Batch and Queue 2-16
System Management 12-42
System Library B-1

Index-308

MASTER INDEX
ULGF$S
UMAP$
UMDIO$
/

,,, ... .,
Ul.'I

Executive 5-206
Executive 5-207
I/O Drivers 1-31

-- .. : .a...-'-

:;,wJ. l..\,;U

PIP utility
Unary operator
binary radix control
decimal radix control
evalutation of multiple
macro call use
octal radix control
one's complement
one-word floating-point
precedence over binary
radix control
Radix-50 control
universal
UNB command
UNBLOCK command
command line format
example
Unbundled
Unconditional assembly
UND C function
UND L function
UND W function
UNDC command
Undefined record format

Utilities 3-42
PDP-11 MACR0-11 3-4
PDP-11 MACR0-11 3-5
PDP-11 MACR0-11 3-5
PDP-11 MACR0-11 3-4
PDP-11 MACR0-11 7-5
PDP-11 MACR0-11 3-5
PDP-11 MACR0-11 3-5, 6-35 to 6-36
PDP-11 MACR0-11 3-5, 6-35 to 6-36
PDP-11 .MACR0-11 3-16
PDP-11 MACR0-11 6-31 to 6-33
PDP-11 MACR0-11 3-5, 6-30
PDP-11 MACR0-11 3-3, 3-5
MCR Operations 3-221
MCR Operations 3-221
MCR Operations 3-221
MCR Operations 3-221
Introduction Gloss-35
PDP-11 MACR0-11 6-53
EDT Editor 5-27
EDT Editor 2-16 to 2-17, 5-32
EDT Editor 5-29
EDT Editor 8-24
RMS-11 Introduction 3-4
RMS-11 User's Guide 1-11, 2-17

See also FB$UDF code in RFM field
Undefined symbol
PDP-11 MACR0-11 3-8
See also U error
Undeleting
buff er contents after system
EDT Edi tor 3-1
failure
characters (keypad)
EDT Editor 5-27
EDT Edi tor 8-24
characters (nokeypad)
lines
keypad
EDT Editor 2-16 to 2-17
EDT Edi tor 5-32
lines (keypad)
1 ines (no keypad)
EDT Editor 8-25
EDT Editor 5-36
PASTE (keypad)
PASTE (nokeypad)
EDT Editor 8-15
REPLACE (line editing)
EDT Edi tor 7-14
words (keypad)
EDT Edi tor 5-29
words (nokeypad)
EDT Edi tor 8-24
Underline ( )
ODT
Program Development 5-2
Command Language 1-9, 3-16
Underscore { )
Underscore (-) command
ODT 2-5, 4-5
EDT Editor 8-25
UNDL commandEDT Editor 2-41, 8-24
UNDW command
Error Logging 1-6
Unexpected traps or interrupts
MCR Operations 3-222
UNF command
System Management 10-74
VMR
Command Language 7-37 to 7-38,
UNFIX command
9-47
MCR Operations 3-222
MCR Operations 3-222
command line format
error message
MCR Operations 3-222
MCR Operations 3-222
example
System Management 10-74
VMR
System Management 10-74
command line format
example
System Management 10-74
UNIBUS
power-fail recovery
I/O Drivers 23-6
Index-309

MASTER INDEX
UNIBUS Mapping Register
static allocation of
during system generation
UNIBUS switch
Unit Control Block
See UCB
Unit number
parameter to NMBLK$
/UNIT switch
DSC utility
Unit-record device

Writing I/0 Driver B-4
I/O Drivers 23-1

I/O Operations 2-31
Utilities 8-22
RMS-11 Introduction 3-5
RMS-11 User's Guide 1-18, A-1
RMS-11 Macros 3-2, 5-20, 5-37,
5-43, 5-77, 5-88, 5-104,
5-111, 5-117
RMS-11 Utilities 4-5
Task Builder 11-37
ODT 6-2

RMSCNV utility
UNITS option
Universal digital controller
See UDC
Universal library
command procedures in
create
Universal library file
inserting module
LBR utility
replacing module
LBR utility
Universal unary operator
See also Unary operator
universal
UNL command
unloading driver
VMR
/UNL keyword
MOUNT command
Unlabeled magtape volume

Command Language 6-41
MCR Operations 4-19
System Library B-1
Utilities 10-20
Utilities 10-27
PDP-11 MACR0-11 3-3
MCR Operations 3-223
Writing I/O Driver 3-2
System Management 10-75
MCR Operations 3-125
Command Language 5-4, 5-35 to
5-36
I/O Operations G-15
I/O Drivers 8-15 to 8-16
I/O Operations G-12
I/O Operations G-16
I/O Operations G-11, G-16
I/O Operations G-10
I/O Operations G-11
I/O Operations G-12
MCR Operations 3-223
MCR Operations 3-223
MCR Operations 3-223
MCR Operations 3-223
System Management 10-75
System Management 10-75
System Management 10-75
Command Language 4-75 to 4-76,
9-47

Unlabeled tape
example
file attributes
positioning
specifying block size
specifying carriage control
specifying record size
UNLOAD command
command line format
error message
example
VMR
command line format
example
UNLOCK command
Unlock Group Global Event Flags
directive
$UNLPG (unlock page)
Unmap Address Window directive
Unmapped
system
correction to multiuser MCR
memory layout
Unmapped system
definition

question

Executive 5-206
System Library 8-31
Executive 5-207
Task Builder 2-14
Release Notes 1-35
Task Builder 2-16
System Generation (llM) 1-5
System Generation (llM) 4-5

Index-310

MASTER INDEX
Unnamed program section
See Program section
/UNOVR keyword
, ."r"P'
\....L...i.

------~

\,;UUllUC:UlU

Unowned device
UNS command
UNSave command
EDI editor
UNSTOP command
command line format
example
Unstop Task directive
UP function
/UP switch
PIP utility

VFY utility
UPD argument to ORG$ macro
$UPDATE macro
UPDATE operation
and ODLs
and record size
and shared access
and stream records
changeable keys
declaring with ORG$ macro
deferred write
duplicate keys
indexed files
move mode
indexed files
relative files
sequential files
relative files
sequential files
$UPDATE macro
/UPDATE switch
BAD utility
Updating
DCL source module
Executive source module
MCR source module
Uppercase
/UPPERCASE job qualifier
SET QUEUE command
UPPERCASE ON/OFF command
EDI editor
/UPPERCASE qualifier
PRINT command
User
non privileged
privileged
User account
User buff er
address
See UBF field in RAB
size
See USZ field in RAB
User defined switch string
User Environment Test Package
See UETP
User File Directory

u~n

1-1'-"4'-

n~~~~~;n~e

~-An

'iJi:'W•W.~A'V.1.6....,..,;

-_.....,.

Command Language 5-9, 5-13
MCR Operations 3-225
Utilities 2-48
MCR Operations 3-225
MCR Operations 3-225
MCR Operations 3~225
Executive 5-209
EDT Editor 2-10, 5-13
Utilities 3-42
Utilities 9-8
RMS-11 Macros 2-3
RMS-11 Macros 5=124
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-11
RMS-11 User's Guide 8-5
RMS-11 User's Guide 2-16
RMS-11 User's Guide 2-6, 2-10
RMS-11 User's Guide 2-17
RMS-11 User's Guide 6-10
RMS-11 Macros 2-3
RMS-11 User's Guide 7-9
RMS-11 User's Guide 6-9
RMS-11 User's Guide 5-14, 7-6,
7-9
RMS-11 User's Guide 3-14
RMS-11 User's Guide 7-7 to 7-8
RMS-11 User's Guide 4-12 to 4-13
RMS-11 User's Guide 3-13
RMS-11 User's Guide 4-12
RMS-11 User's Guide 3-12
RMS-11 Macros 5-124
Utilities 6-6
Release Notes 1-46
Release Notes 1-40
Release Notes 1-42
Introduction 1-18
Batch and Queue 2-21
Utilities 2-48
Batch and Queue 2-4
Introduction 5-5, Gloss-25
Introduction 5-5, Gloss-25
Release Notes 1-22
RMS-11 User's Guide 1-14

Error Logging 3-21
Tl~~-~··~~~~~

.L,V

Vl:'C:&.Q'-.&.VU.;:»

C_~
.J-&.

System Management B-1
See aiso UFD
USER FILE DIRECTORY command

MCR Operations 3-219
Index-3ll

MASTER INDEX
user group
user I/O function
user Identification Code
See UIC
/USER keyword
DISMOUNT command
user mode
command
set
user name
user record buffer
parameter for FDRC$A
size
user volume lables
ANSI magtape
user-controlled partition
User-defined symbol
table
User-mode diagnostic function
user-provided interlock
sharing declaration
user-specified prompt
USERCM
.USLUl
reserved global symbol
.USLU2
reserved global symbol
%USR
USRTB file
content
$USRTB label
USTP$
USZ field in RAB
CONNECT operation
GET operation
offset
PUT operation
READ operation
summary
Utilities
interactive
testing in UETP

MCR Operations 2-3
Error Logging 5-25

MCR Operations 3-50
ODT 1-4, 3-2
ODT 2-11
ODT 2-11
Command Language 3-3 to 3-4
I/O Operations 2-9
I/O Operations 2-10
I/O Operations G-3
System Management 14-1
PDP-11 MACR0-11 3-6 to 3-8
PDP-11 MACR0-11 2-2, 3-6 to 3-8,
3-15
I/O Drivers 1-30
RMS-11 User's Guide 3-6
RMS-11 User's Guide 2-7
I/O Operations 6-4, 6-10
Error Logging 3-2
Task Builder E-2
Task Builder E-2
Error Logging 5-25
Writing I/O Driver 3-12
Writing I/O Driver 3-13
Executive 5-209
RMS-11 Macros 4-7, 4-13
RMS-11 Macros 5-6
RMS-11 Macros 5-61, 5-64, 5-67
RMS-11 Macros 6-115
RMS-11 Macros 5-92, 5-96
RMS-11 Macros 5-98, 5-100
RMS-11 Macros 6-144
Command Language 1-17 to 1-19,
B-1
System Management 9-3

RSX-llM

relationship to RCT
UETP
Utilities Manual
note to
DMP
FLX
PAT

technical changes
Utility
See also RMSBCK, RMSCNV,
RMSDEF, RMSDES, RMSDSP,
RMSIFL, RMSRST
command line format
editing
EDI editor
file manipulation
FLX utility
PIP utility

System Management 5-5
System Management 9-2
Release Notes 1-49
Release Notes 1-49
Release Notes 1-49
Release Notes 1-49
Release Notes 1-13
Introduction 4-1 to 4-2, Gloss-36
RMS-11 Introduction 5-1
RMS-11 User's Guide 1-12, 2-11

Utilities 1-4
Utilities 1-2
Utilities 1-2
Utilities 1-2

Index-312

MASTER INDEX
Ut il i t y ( Cont • )
file specification
default

Utilities 1-4
Utilities 1-4
Utilities 1-9
Utilities 1-6
Utilities 1-6
Utilities 1-7
Utilities 1-6
Utilities 1-9
Utilities 1-1
Utilities 15-1
Utilities 1-3
Utilities 1-3
Utilities 1-3
Utilities 1-4

format

indirect command file
invoking
DCL
installed
MCR
uninstalled
listed
program maintenance
CMP utility
PAT utility
SLP util i tv
ZAP utility
programming
DMP utility
LBR utility
RMSBCK

Utilities 1-3
Utilities 1-3
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-12
RMS-11 Introductjon 5-2
RMS-11 User's Guide 1-12
RMS-11 User's Guide 6-26 to 6-27
RMS-11 Introduction 5-1
RMS-11 user's Guide 1-12, 1-18
RMS-11 User's Guide 6-29
RMS-11 User's Guide 4-3, 6-22
RMS-11 User's Guide 3-5, 4-4,
6-26
RMS-11 User's Guide 3-4, 4-4,
6-26
RMS-11 User's Guide 6-7
RMS-11 User's Guide 4-5
RMS-11 user's Guide 6-14
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-12, 1-19
RMS-11 Introduction 5-2
RMS-11 User's Guide 1-12
RMS-11 User's Guide 6-26 to 6-27
RMS-11 Introduction 5-3
RMS-11 User's Guide 1-12

RMSCNV
populating files
RMSDES
bucket fill size
bucket size
DEQ
initial allocation
key segments
MRN
placement control
RMSDSP
RMSIFL
populating files
RMSRST
volume maintenance
BAD utility
BRU utility
DSC utility
FMT utility
VFY utility
Utility programs

Utilities 1-2
Utilities 1-3
Utilities 1-3
Utilities 1-2
Utilities 1-3
Program Development 1-8 to 1-9

v
V command
ZAP utility
V register
/V switch
variable
testing
variable with fixed control
See VFC
Variable-length record
mag tape
non sequenced

ODT 2-11
Utilities 15-17
ODT 2-7, 5-5
Error Logging 3-7
ODT 2-1
MCR Operations 4-51

I/O Operations 1-4
I/O Operations 1-4
I/O Operations 1-4
RMS-11 Introduction 3-2
RMS~ll User's Guide 1-11, 2-15

---··----~
::;C"f
UC 111...0 CU

Variable-length record format
See also FB$VAR code in RFM field

Index-313

MASTER INDEX
variable-length record format
(Cont.)
and medium
VAX/VMS
See also DCL
remote access
VAX/VMS DCL
VAX/VMS system prompts and CLI
/VB switch
CMP utility
VBN
See also BKT field in RAB
access
areas
VBN access
See BKT field in RAB
VCB
role of
in I/O data structure
/VE switch
FLX utility
/VEC switch
BAD utility
DSC utility
vector
altering using CNF
autoload
conventional task
eliminating unnecessary
I- and D-space format
I- and D-space task
in region
data transfer
size of
definition
floating
highest interrupt
in task header
extension area format
ODT
overlaid region
I- and D-space task
SST address
Vector register
reentry
verification
device
BAD utility

RMS-11 User's Guide 2-15
EDT Editor 2-2
Introduction 1-6
RMS-11 User's Guide B-1, B-3
Command Language 1-19
EDT Editor 2-3
Utilities 12-3
RMS-11 Introduction 2-4
RMS-11 User's Guide 8-11
RMS-11 Introduction 3-12, 4-7
RMS-11 User's Guide 1-20
RMS-11 User's Guide 6-10

Writing I/O Driver 2-20
Utilities 4-8
Utilities 6-9
Utilities 8-23
System Generation (llM) 2-4
Task Builder 3-20, 4-4
Task Builder B-17
Task Builder 4-6
Task Builder 4-5
Task Builder B-17
Task Builder 5-12
System Generation
System Generation
System Generation
System Generation

(llM)
(llM)
(llM)
{llM)

4-37
1-4
E-3
4-16

Task Builder B-13
Task Builder 11-24
Task Builder 5-11
Task Builder 5-11
Task Builder 11-27
ODT 5-7
ODT 2-6
Utilities 6-3

file structure

VFY utility
task image file content
See ZAP utility
VERIFY command
IOX

effect on NFS volume
VERIFY ON/OFF command
EDI editor
/VERIFY qualifier
BRU utility
/VERIFY switch
DSC utility
FMT utility

Version
file

Utilities 9-1

System Management 4-62
System Management 4-7
Utilities 2-49
Utilities 7-22
Utilities 8-18
Utilities

RMS-11 User's Guide A-3, A-5
Index-314

MASTER INDEX
Version
file ( Cont • )
default
Version identifier
See also .!DENT directive
assembler
standard
Version number
file
RMSBCK utility
RMSCNV utility
RMSDEF utility
RMSDES utility
RMSDSP utility
RMSIFL utility
RMSRST utility
SHOW VERSION command
systems without
Version number directive
Vertical fill characters option
Vertical format control
line printer
terminal
Vertical tab
$VEXT
low-memory context
reserved global symbol
VFC carriage control
See FB$PRN mask in RAT field
VFC header buff er address
See RHB field in RAB
VFC record

RMS-11 User's Guide A-6
PDP-11 MACR0-11 6-4
PDP-11 MACR0-11 E-14
Introduction 1-14, 3-11
Command Language 4-3
RMS-11 Utilities 6-5
RMS-11 Utilities 4-9
RMS-11 Utilities A-5
RMS-11 Utilities 2-16
RMS-11 Utilities 5-5
RMS-11 Utilities 3-5
RMS-11 Utilities 7-5
EDT Editor 9-17
EDT Editor 4-5
PDP-11 MACR0-11 6-16 to 6-17
MCR Operations 3-206
System Management 10-64
I/O Drivers 10-5 to 10-6
I/O Drivers 2-33, 3-26 to 3-27
Command Language 3-22
Task Builder B-10
Task Builder E-2

EDT Editor 6-3
RMS-11 Introduction 3-2
RMS-11 User's Guide 1-11, 2-16

See also FB$VFC code in RFM field
/VFILL keyword
SET command
MCR Operations 3-206
System Management 10-64
VMR
VFY utility
Command Language 5-12
I/O Operations 3-12
Utilities 9-2
command line
error message
Utilities 9-11
Utilities 9-8
file error reporting
operation mode
Utilities 9-3
Utilities 9-4
switch
summary
Utilities 9-4
validity check
Utilities 9-3
/VI keyword
HOME command
MCR Operations 3-74
MCR Operations 3-84
INI command
MOUNT command
MCR Operations 3-125
Video terminal
See VT52, VTlOO
Virgin system
bootstrap
System Generation (llM) 6-2
System Generation (llM) 6-13
nonstandard unmapped
definition
System Generation (llM) 1-6
Executive 3-2
Virtual address space
Virtual address window
Executive 3-2
Executive 5-36
creating
Virtual block
RMS-11 Introduction 2-3
I/O Operations 1-3
definition of

T'n ""t-'""'
n~-~~~~~"e
.............. &&Ii..

1-A

lllCl'::f
--""~"l..Clt-''C

,,_, 'V

reading
writing

I/O Drivers 1-28
I/O Drivers 1-29
Index-315

..L-":l

MASTER INDEX
Virtual block number
See BKT field in RAB
See VBN
Virtual I/O
Virtual memory management
See also Memory management
address conversion ($CVRL)
$ALBLK routine
allocate ($ALVRT)
allocate small virtual block
($ALSVB)
$ALSVB routine
$ALVRT routine
core allocation
core blocks request ($RQVCB)
$CVLOK routine
$CVRL routine
error handling
$EXTSK routine
find page ($FNDPG)
$FNDPG routine
$GTCOR routine
initialize ($INIVM)
$IVIVM routine
$LCKPG routine
library
library file
lock page ( $LCKPG)
memory storage
allocate block ($ALBLK}
extend task ($EXTSK)
get core ($GTCOR)
page lock ($CVLOK}
$RDPAG routine
read page ($RDPAG)
$RQVCB routine
task builder requirements
unlock page ($UNLPG)
$UNLPG routine
write marked page ($WRMPG)
write page ($WRPAG)
$WRMPG routine
$WRPAG routine
Virtual Monitor Console Routine

I/O Drivers 1-2
System Library 8-1
System Library 8-24
System Library 8-10
System Library 8-16
System Library 8-18
System Library 8-19
System Library 8-17
System Library 8-8
System Library 8-20
System Library 8-24
System Library 8-25
System Library 8-2
System Library 8-14
System Library 8-27
System Library 8-28
System Library 8-12
System Library 8-5
System Library 8-7
System Library 8-31
Program Development 1-11
System Library 8-4
System Library 8-30
System Library 8-9
System Library 8-13
System Library 8-11
System Library 8-22
System Library 8-27
System Library 8-26
System Library 8-21
System Library 8-3
System Library 8-31
System Library B-32
System Library 8-28
System Library 8-14
System Library 8-29
System Library 8-15

See VMR

Virtual-to-logical block mapping
optimizations
VMLIB. OLB
VMR
See also SYSVMR.CMD
command
line
comment in
name
parameter
summary
configuring Executive
creating partition
editing SYSVMR.CMD
error message
establishing system features
file specification
/IM switch

RMS-11 User's Guide 8-11
Program Development 1-11
Command Language 6-40
System Generation (llS) 1-2 to
1-3
System Management 10-1
System Management 10-4
System Management 10-5
System Management 10-4
System Management 10-4
System Management 10-5
System Generation (llS) 4-10
System Generation (llS) 4-10
System Generation (llM) 5-14
System Management 10-76
System Generation (llM) 6-9, 6-19
c",.,,~
.... - U'!!lll ...
...
z ... ..........

~,..e.wna .. ~
&"H'"&& ... ~ ......... && ...

, n_.,

.J.V-.J

System Management 10-4
Index-316

MASTER INDEX
VMR (Cont.)
indirect command file
installing task

System Management 10-3
System Generation (llS) 4-10,
A

oz- ... "'

System Generation (llM) 5-19
System Management 10-4
System Generation (llS) 4-10
System Management 10-1
System Generation (llS) 4-14
System Management 10-1
System Management 10-3
Error Logging 5-7

invoking from on-line host
keyword
loading device driver
relationship with MCR
saving system image
starting
terminating
VMS TIME
/VOL keyword
MOUNT command
Volatile register dump
Volume

MCR Operations 3-126
Crash Dump ~.nalyzer 3-1 to 3-2
Introduction 5-5, 5-12, Gloss-36
Command Language 4-1, 5-3 to 5-4,
5-26 to 5-27, 5-29 to 5-42
MCR Operations 2-1

advancing to next
See NXTVOL operation
backing up
BRU utility
compressing
DSC utility
dedicating
density
specifying
directory listing
FLX utility
disk
dismounting
displaying free space
PIP utility
VFY utility
examining data
DMP utility
file
deleting
FLX utility
recovering lost
VFY utility
transferring
FLX utility
Files-11
bad block
entering
marking
default protection
specifying
directory
accessing
home block
modifying
initializing
label
overriding
specifying
level
owner
specifying

Utilities 7-1
Utilities 8-3
MCR Operations 3-124
MCR Operations 3-119
Utilities 4-7
ColDlland Language 5-3 to 5-4, 5-38
MCR Operations 3-49
Utilities 3-23
Utilities 9-5
Utilities 11-1
Utilities 4-7
Utilities 9-6
Utilities 4-4
MCR Operations 2-1
MCR Operations 3-78
MCR Operations 3-77
MCR Operations 3-73, 3-84, 3-123
MCR Operations 3-72, 3-82, 3-121
MCR Operations 3-71
MCR Operations 3-76
MCR Operations 3-73
MCR Operations 3-73, 3-77
MCR Operations 3-82

preparing
protecting with TEMPORARYFILE
supported

MCR Operations 3-73 to 3-74, 3-83
to 3-84
MCR Operations 2-1
System Management 4-6i
MCR Operations 2-1

Index-317

MASTER INDEX
Vol urne (Cont.)
foreign
accessing
specifying
formatting
FLX utility
FMT utility
information
displaying
initializing
BRU utility
FLX utility
label
overriding
listing file-ID
VFY utility
locating bad block
BAD utility
FMT utility
VFY utility
magnetic tape
mag tape
labeled
unlabeled
mounted
mounting
ACP
specifying
multiple times
operator assistance
requesting
NFS
block range altering
block range display
list of parameter commands
for
retries upon error
selecting
with !OX
with VERIFY
owner
specifying
private
protection
public
accessing
recovering
lost block
VFY utility
lost file
VFY utility
space
DSC utility
restoring
BRU utility
selecting
Files-11 for IOX
NFS for !OX
shareable
shared
unmounted
accessing
verifying

Command Language 5-9 to 5-10,
5-12 to 5-13, 5-26, 5-29
MCR Operations 2-1
MCR Operations 2-1
MCR Operations 3-120
Utilities 4-4
Utilities 5-1
MCR Operations 3-125
Utilities 7-17
Utilities 4-2
MCR Operations 3-122
Utilities 9-6
Utilities 6-1
Utilities 5-1
Utilities 9-7
RMS-11 Introduction 2-5
Command Language 5-4, 5-35 to
5-36
Command Language 5-4, 5-35 to
5-36
Command Language 5-9, 5-13
MCR Operations 3-114
MCR Operations 3-118
MCR Operations 3-124
MCR Operations 3-126
System Management 4-50
System Management 4-50
System Management 4-8
System Management 4-54
System Management 4-56
System Management 4-62
MCR Operations 3-124
MCR Operations 3-115
Command Language 4-9
MCR Operations 3-115
MCR Operations 3-123
Utilities 9-7
Utilities 9-6
Utilities 8-3
Utilities 7-1
System Management 4-7
System Management 4-7
Command Language 5-31, 5-38
MCR Operations 3-115
MCR Operations 3-114
Utilities 9-1
Index-318

MASTER INDEX
Volume
verifying {Cont.)
block
VFY utility
write-enabled
specifying
Volume Control Block
See VCB
Volume Home Block
Volume Identifier
See also Volume-ID
specifying
Volume label
Volume label switch
Volume protection
Volume-ID
VOLUMECHECK command
IOX

VS60
VSECT option
VT05B
VTlOO
CHAR function
EDT editing
escape sequence format
FILL function
HELP text
keyboard and keypad
keypad editing
keypad number
nokeypad editing
select range
SET KEYPAD
SET NOKEYPAD
SET SCREEN
SET TERMINAL
SHOW TERMINAL
VTlOl
VT102
VT105
VTll
VT131
VT50
VT50H
VT52
EDT editing
FILL function
HELP text
keypad editing
keypad number
nokeypad editing
select range
SET KEYPAD
SET NOKEYPAD
SET SCREEN
SET TERMINAL
SHOW TERMINAL
VT55
VT61

Utilities 9-7
MCR Operations 3-127
Command Language 5-11, 5-47 to
5-59, 9-18, 9-20
MCR Operations 3-116
MCR Operations 3-126
Command Language 5-28
Error Logging 3-7
Command Language 5-38, 5-52, 5-58
Command Language 5-38 to 5-40
System Management 4-63
I/O Drivers 20-1
Task Builder 11-38
I/O Drivers 2-5, 3-3
Introduction 1-3, 1-16 to 1-17
Command Language 3-1, 3-14
I/O Drivers 2-5, 3-4
EDT Editor 5-16
EDT Editor 1-9
I/O Drivers 2-31
EDT Editor 5-49
EDT Editor 1-4
EDT Editor 1-6
EDT Editor 1-2, 2-4, 5-4
EDT Editor 10-3
EDT Editor 2-36, 8-1
EDT Editor 2-12, 5-33
EDT Editor 9-5
EDT Editor 9-5
EDT Editor 9-6
EDT Editor 9-12
EDT Editor 9-17
I/O Drivers 2-6
I/O Drivers 2-6
I/O Drivers 2-6
I/O Drivers 20-1
I/O Drivers 2-6
I/O Drivers 2-5, 3-3
I/O Drivers 2-5, 3-3
Introduction 1-2, 1-16 to 1-17
Command Language 3-1, 3-14, 3-18
I/O Drivers 2-5, 3-4
EDT Editor 1-9
EDT Editor 5-49
EDT Editor 1-4
EDT Editor 1-2, 2-4, 5-3
EDT Editor 10-3
EDT Editor 2-36, 8-1
EDT Editor 2-12, 5-33
EDT Editor 9-5
EDT Editor 9-5
EDT Editor 9-6
EDT Editor 9-12
EDT Editor 9-17
I/O Drivers 2-5, 3-4
I/O Drivers 2-5, 3-4

Index-319

MASTER INDEX

w
W command
W register
/W switch
W.NLEN
W.NOFF
WAIT command
IOX

.WAIT directive
example
format
Wait For Logical OR Of Event
Flags directive
Wait For Significant Event
directive
Wait For Single Event Flag
directive
/WAIT keyword
MOUNT command
$WAIT macro
RSTS/E
WAIT operation
block stream
record stream
$WAIT macro
WAIT$
WAIT$ macro call
format
parameters
$WALFN
predefined syntax element in
MML
WB
role of
in I/O data structure
/WB keyword
SAVE command
wee field in NAM block
offset
PARSE operation
SEARCH operation
summary
/WCHK keyword
SET command
VMR
/WCHK switch
BAD utility
/WD switch
DMP utility
WDB
assigned setting
format
generating
generating in FORTRAN
WDBBK$
macro call
macro expansion
WDBDF$
.WDFDR
.WDFFP
.WDFUI
WDI field in NAM block
off sat
PARSE operation
SEARCH operation

ODT 2-11, 6-3
ODT 2-6, 5-3
Error Logging 3-7, 3-21
Executive 5-36
Executive 5-36
System Management 4-64
MCR Operations 4-55
MCR Operations 4-55
MCR Operations 4-55
Executive 5-223
Executive 5-221
Executive 5-225
MCR Operations 3-126
RMS-11 Macros 5-126
RMS-11 Macros D-4
RMS-11 Introduction 4-4
RMS-11 User's Guide 1-15
RMS-11 Macros 4-14
RMS-11 Macros 4-9
RMS-11 Macros 5-126
I/O Operations 3-35 to 3-36
I/O Operations 3-36
I/O Operations 3-36 to 3-37
System Management 12-40
Writing I/O Driver 2-19 to 2-20
MCR Operations 3-159
RMS-11 Macros 6-94
RMS-11 Macros 5-87
RMS-11 Macros 5-116, 5-118
RMS-11 Macros 6-106
MCR Operations 3-207
System Management 10-65
Utilities 6-9
Utilities 11-8
Executive 3-14, 3-16, 3-18
Executive 3-19
Executive 3-14 to 3-15
Executive 3-16 to 3-17
Executive 3-18
Executive 3-17
Executive 3-17
Executive 3-17
Executive 3-17
I/O Operations 4-3
I/O Operations 4-5
I/O Operations 4-4
RMS-11 Macros 6-94
RMS-11 Macros 5-87
RMS-11 Macros 5-116, 5-118
Index-320

MASTER INDEX
WDI field in NAM block (Cont.)
summary
$WDONUM
predefined syntax element in
MML
/WF switch
RMSCNV utility
$WFIL
predefined syntax element in
MML
$WFILE
predefined syntax element in
MML
WHILE/UNTIL/DO statement
WHOLE
range specification
/WI switch
WIDE argument
Width of text
limiting
Width switch
Wildcard

RMS-11 Macros 6-107
System Management 12-40
RMS-11 Utilities 4-14
System Management 12-41
System Management 12-41
Error Logging 5-35
EDT Editor 6-10
Task Builder 10-51
PDP-11 MACR0-11 8-11 to 8-12
EDT Editor 5-49
Error Logging 3-7, 3-21
Introduction 3-1 to 3-5, 3-8,
3-10 to 3-11, Gloss-36
Command Language 3-16, 4-6 to 4-8
MCR Operations 2-6
RMS-11 Introduction 4-1
Introduction 3-2
MCR Operations 2-6

asterisk
directory context
See WDI field in NAM block
file context
See WCC field in NAM block
file specification
BRU utility
FLX utility
PIP utility
loops
operation
See NB$WCH mask in FNB field
percent sign
Wildcard loop
Wildcard operations
effects of N.STAT
.FIND
/WIN keyword
HOME command
INI command
MOUNT command
Window
block
creating a
for a region
in overlay
definition block
descriptor
in overlay
for region and linking task
identification number
option
region
turning
areas
contiguity
FllACP size
optimizations

RMS-11 user's Guide A-2 to A-3
Utilities 7-7
Utilities 4-3
Utilities 3-7
RMS-11 User's Guide A-4
Introduction 3-4
RMS-11 Macros 3-8
I/O Operations 4-14
I/O Operations 4-13
I/O Operations 4-13
MCR Operations 3-74
MCR Operations 3-84
MCR Operations 3-127
Task Builder 2-20 to 2-22
RMS-11 user's Guide 8-11
Task Builder 2-20 to 2-22
Task Builder 5-14
Task Builder 5-14
Task Builder 3-48
Executive 3-14
Task Builder 2-22
Task Builder B-20 to B-21
Task Builder 3-20
Task Builder 5-15
Executive 3-3
Task Builder 11-39
Task Builder 5-25
RMS-11 user's Guide 8-11
RMS-11 user's Guide 8-13
RMS-11 User's Guide 8-12
RMS-11 user's Guide 8-13
RMS-11 user's Guide 8-12

Index-321

MASTER INDEX
Window
turning (Cont.)
window size
virtual address
wrap around
in virtual sections
Window block
See also WB
Window Definition Block
See also WDB
Window definition block
Window ID
Window status word
/WINDOWS qualifier
BRU utility
WK:
pseudo device
/WLT switch
FMT utility
$$WNDS
reserved PSECT name
WNDWS option
$WONUM
predefined syntax element in
MML
Word
memory
.WORD directive
implicit
WORD function
Word location
displaying
opening
Word mode
operator
ASCII
octal
Radix-50
Word wrap
setting
Work file
accesses
system overhead
assembler
parameters for
performance
changing device to improve
World group
/WRAP keyword
SET command
VMR
Wrap-around option

RMS-11 User's Guide 8-12
Executive 3-2 to 3-3
Task Builder 5-54
Executive 5-36
Executive 5-36 to 5-37, 5-39,
5-58 to 5-59, 5-87, 5-101
Executive 5-38, 5-189
Executive 5-36
Executive 5-36, 5-101
Utilities 7-22
Command Language 5-6
Utilities 5-9
Task Builder E-4
Task Builder 11-39
System Management 12-40
RMS-11 Introduction 2-1
Introduction 5-6, Gloss-36
PDP-11 MACR0-11 6-24 to 6-25
PDP-11 MACR0-11 2-1, 2-4, 6-25
EDT Editor 2-12, 5-17
ODT 4-2 to 4-6
ODT 4-2 to 4-6
ODT 2-7, 4-6
ODT 2-7, 4-2 to 4-3
ODT 2-7
EDT Editor 5-50
Task Builder F-2f F-5 to F-7
PDP-11 MACR0-11 F-1
Task Builder F-2
Task Builder F-5
MCR Operations 2-3
MCR Operations 3-208
System Management 10-65
MCR Operations 3-208
System Management 10-65

Wrapping
line
EDT

Writable-block context
Write
access
break-through
checking
specifying
Write checking
specifying

Introduction 2-16
RMS-11 Macros 4-12
Introduction Gloss-36
MCR Operations 2-3
I/O Drivers 2-22
MCR Operations 3-207
System Management 10-65

Index-322

MASTER INDEX
EDT Editor 2-36, 7-22
Utilities 2-49
Error Logging 5-31

WRITE command
EDI editor
WRITE GROUP statement
/WRITE keyword
MOUNT command
Write logical record
random mode
sequential mode
$WRITE macro
sequential access
VBN access
WRITE operation

MCR Operations 3-127
I/O Operations 3-28
I/O Operations 3-30

access modes
and shared access
$WRITE macro
sequential access
VBN access
WRITE statement
Write virtual block
WRITE$
FOB
WRITE$ macro call
format
parameters
Write-behind multiple buffering
Write-check
enabling in IOX
Write-lock
software support
write-back cache data
handling in RCT
WRITECHECK command
!OX

$WRMPG (Write marked page)
$WRPAG (Write page)
WS.MAP
WSIG$S
WTLO$
WTSE$
$WUIC
predefined syntax element in
MML

RMS-11 Macros 5-127
RMS-11 Macros 5-129
RMS-11 Introduction 4-7
RMS-11 Macros 4-14
RMS-11 Introduction 4-7
RMS-11 User's Guide 2-6
RMS-11 Macros 5-127
RMS-11 Macros 5-129
Error Logging 4-30, 5-31
I/O Operations 3-34
I/O Operations 3-34
I/O Operations 3-35
I/O Operations 3-34 to 3-35
I/O Operations 3-35
I/O Operations 2-19
System Management 4-65
System Generation {llM) 4-32
System Management 5-5
System Management 4-65
System Library 8-28
System Library 8-14
Executive 5-36
Executive 5-221
Executive 5-223
Executive 5-225
I/O Drivers 1-24
System Management 12-42

x
x command
ODT
ZAP utility
x register
x symbol
X$-family macro
declaring
ALL block
DAT block
KEY block
PRO block
SUM block
XAB
See also ALL block
See also DAT block
See also KEY block
See also PRO block
See also SUM block
chaining to FAB

ODT 1-4, 2-11
Program Development 5-8
Utilities 15-16
ODT 2-6, 5-3, 5-7
ODT 2-1
RMS-11 Macros 2-9
RMS-11
RMS-11
RMS-11
RMS-11
RMS-11

Macros C-3
Macros C-3
Macros C-3
Macros C-3
Macros C-3

RMS-11 Macros 2-12
Index-323

MASTER INDEX
XAB field in FAB
chaining XABs to FAB
CLOSE operation
CREATE operation
DISPLAY operation
ENTER operation
ERASE operation
EXTEND operation
off set
OPEN operation
PARSE operation
REMOVE operation
RENAME operation
SEARCH operation
summary
XAB$B macro
XAB$BT macro
XAB$E macro
declaring
XABOF$ macro
XB$-family symbol
declaring
ALL block
DAT block
KEY block
PRO block
SUM block
XAB
XB$ALL code in COD field
summary
value
XB$BN2 code in DTP field
CREATE oper~tion
DISPLAY operation
OPEN operation
value
XB$BN4 code in DTP field
CREATE operation
DISPLAY operation
OPEN operation
value
XB$CHG mask in FLG field
CREATE operation
DISPLAY operation
OPEN operation
summary
value
XB$CTG mask in AOP field
CREATE operation
EXTEND operation
OPEN operation
RSTS/E
summary
value
XB$CYL mask in ALN field
RSTS/E
XB$DAT code in COD field
summary
value
XB$DTL code in BLN field
summary
value
XB$DUP mask in FLG field
CREATE operation
DISPLAY operation
OPEN operation
summary

RMS-11 Macros 2-12
RMS-11 Macros 5-3
RMS-11 Macros 5-9
RMS-11 Macros 5-29
RMS-11 Macros 5-35
RMS-11 Macros 5-40
RMS-11 Macros 5-46
RMS-11 Macros 6-24
RMS-11 Macros 5-73
RMS-11 Macros 5-86
RMS-11 Macros 5-102
RMS-11 Macros 5-108
RMS-11 Macros 5-116
RMS-11 Macros 6-66
RMS-11 Macros 2-8' C-3
RMS-11 Macros C-4
RMS-11 Macros 2-9
RMS-11 Macros C-3
RMS-11 Macros C-4
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-3 to C-4
RMS-11 Macros C-4
RMS-11 Macros 2-8
RMS-11 Macros 6-10
RMS-11 Macros 6-2
RMS-11 Macros 5-18
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-67
RMS-11 Macros 5-18
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-67
RMS-11 Macros 5-19
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-76
RMS-11 Macros 6-67
RMS-11 Macros 5-18
RMS-11 Macros 5-47
RMS-11 Macros 5-79
RMS-11 Macros D-4
RMS-11 Macros 6-6
RMS-11 Macros 6-2
RMS-11 Macros D-3 to D-4
RMS-11 Macros 2-8
RMS-11 Macros 6-17
RMS-11 Macros 6-14
RMS-11 Macros 6-15
RMS-11 Macros 6-14
RMS-11
RMS-ii
RMS-11
RMS-11
Index-324

Macros 5-19
Macros 5-31
Macros 5-80
Macros 6-77

MASTER INDEX
XB$DUP mask in FLG field (Cont.)
value
XB$HRD mask in AOP field
CREATE operation
EXTEND operation
of ALL block
RSX-11
OPEN operation
RSTS/E
summary
value
XB$IN2 code in DTP field
CREATE operation
DISPLAY operation
OPEN operation
value
XB$IN4 code in DTP field
CREATE operation
DISPLAY operation
OPEN operation
value
XB$INI mask in FLG field
DISPLAY operation
OPEN operation
value
XB$KEY code in COD field
summary
value
XB$KYL code in BLN field
summary
value
XB$LAL code in BLN field
summary
value
XB$LBN mask in ALN field
CREATE operation
EXTEND operation
RSTS/E
value
XB$NUL mask in FLG field
CREATE operation
DISPLAY operation
OPEN operation
summary
value
XB$PAC code in DTP field
CREATE operation
DISPLAY operation
OPEN operation
value
XB$PRL code in BLN field
summary
value
XB$PRO code in COD field
summary
value
XB$SML code in BLN field
summary
value
XB$STG code in DTP field
CREATE operation
DISPLAY operation
OPEN operation
value
XB$SUM code in COD field
summary
value

RMS-11 Macros 6-67
RMS-11 Macros 5-17
RMS-11 Macros 5-47
RMS-11 Macros D-4
RMS-11 Macros 5-79
RMS-11 Macros D-4
RMS-11 Macros 6-7
RMS-11 Macros 6-2
RMS-11 Macros 5-18
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-67
RMS-11 Macros 5-18
RMS=ll Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-67
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-67
RMS-11 Macros 2-8
RMS-11 Macros 6-70
RMS-11 Macros 6-67
RMS-11 Macros 6-69
RMS-11 Macros 6-67
RM,S-11 Macros 6-9
RMS-11 Macros 6-2
RMS-11 Macros 5-17
RMS-11 Macros 5-47
RMS-11 Macros D-3 to D-4
RMS-11 Macros 6-2
RMS-11 Macros 5-19
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-78
RMS-11 Macros 6-67
RMS-11 Macros 5-18
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-67
RMS-11 Macros 6-109
RMS-11 Macros 6-108
RMS-11 Macros 2-8
RMS-11 Macros 6-110
RMS-11 Macros 6-108
RMS-11 Macros 6-146
RMS-11 Macros 6-145
RMS-11 Macros 5-18
RMS-11 Macros 5-31
RMS-11 Macros 5-80
RMS-11 Macros 6-67
RMS-11 Macros 2-8
RMS-11 Macros 6-147
RMS-11 Macros 6-145

Index-325

MASTER INDEX
XB$VBN mask in ALN field
CREATE operation
EXTEND operation
RSTS/E
value
XBAOF$ macro
XBDOF$ macro
XBKOF$ macro
XBPOF$ macro
XBSOF$ macro
XDT
debugging driver code
ODT features and commands not
included
using
/XH switch
.XQIO
.XQT directive
example
format
/XT switch
$xxDAT label
$xxEND label
$xxINP symbol
$xxINT symbol
$xxOUT symbol
$xxTBL label
on DDT
$xxTBL symbol
/xxx keyword
HELP command

RMS-11 Macros 5-17
RMS-11 Macros 5-47
RMS-11 Macros D-3 to D-4
RMS-11 Macros 6-2
RMS-11 Macros C-4
RMS-11 Macros C-4
RMS-11 Macros C-4
RMS-11 Macros C-4
RMS-11 Macros C-4
Crash Dump Analyzer 1-2
System Generation (llM) 4-33
Writing I/O Driver 3-17 to 3-18
Writing I/O Driver 3-17
MCR Operations 3-26
Task Builder 10-52
I/O Operations 4-20
MCR Operations 4-55
MCR Operations 4-56
MCR Operations 4-56
Task Builder 10-53
Writing I/O Driver 3-9
Writing I/O Driver 3-9
Writing I/O Driver 3-5
Writing I/O Driver 3-5
Writing I/O Driver 3-5
Writing I/O Driver 4-10
Writing I/O Driver 3-5
MCR Operations 3-66

y
/@Y switch
FMT utility

Utilities 5-9

z
Z command
Z error
summary
ZAP utility
address boundary
displaying
addressing mode
command
carriage return
general purpose
summary
open/close location
summary
command line
element
error message
example
indirect command file
initiating (invoking)
location
addressing
closing
contents
changing
displaying
verifying
opening

ODT 2-11
PDP-11 MACR0-11 5-4
PDP-11 MACR0-11 D-5
Utilities 15-3
Utilities 15-4
Utilities 15-7
Utilities 15-7
Utilities 15-15
Utilities 15-7
Utilities 15-11
Utilities 15-6
Utilities 15-8
Utilities 15-23
Utilities 15-18
Utilities 15-6
Utilities 15-5
Utilities 15-4
Utilities 15-13
Utilities 15-13
Utilities 15-12
Utilities 15-18
Utilities 15-12
Index-326

MASTER INDEX
ZAP utility
location (Cont.)
specifying
ODT on-line debugger
operating mode
register
setting value
relocation biases
switch
task image file
I- and D-space
multiuser
resident library
terminating

Utilities 15-10
Utilities 15-1
Utilities 15-2
Utilities 15-18
Utilities 15-4
Utilities 15-2
Utilities 15-3
Utilities 15-3
Utilities 15-3
Utilities 15-3
Utilities 15-5

/ZE switch

FLX utility
Zero byte, appending to character
string

Utilities 4-8

PDP-11 MACR0-11 6-28

Index-327

RSX-11M/RSX-11S
Information Directory and Master Index
AA-2593G-TC
READER'S COMMENTS
NOTE: This form is for document comments only. DIGITAL will use comments submitted on this form at the
company's discretion. If you require a written reply and are eligible to receive one under Software
Performance Report (SPR) service, submit your comments on an SPR form.

Did you find this manual understandable, usable, and well organized? Please make suggestions for improvement.

Did you find errors in this manual? If so, specify the error and the page number.

Please indicate the type of user/reader that you most nearly represent.

D
D
D
D
D
D

Assembly language programmer
Higher-level language programmer
Occasional programmer (experienced)
User with little programming experience
Student programmer
Other (please specify)

Organization
Street
State _ _ _ _ _ _ Zip Code _ _ _ _ __
or Country

DoNotTear-FoldHereandTape -

No Postage
Necessary

111111

if Mailed in the
United States

BUSINESS REPLY MAIL
FIRST CLASS PERMIT N0.33 MAYNARD MASS.
POSTAGE WILL BE PAID BY ADDRESSEE

BSSG PUBLICATIONS ZK1-3/J35
DIGITAL EQUIPMENT CORPORATION
110 SPIT BROOK ROAD
NASHUA, NEW HAMPSHIRE 03061

Do Not Tear - Fold Here