Pdp-8-i Console Connector M900

Summary: This document is a technical schematic for the "M900" printed circuit board, which serves as a connector for the PDP-8/I console. The diagram illustrates an array of 24 logic gates (specifically DEC 7400N integrated circuits) organized into four columns, with each gate connected to a 470-ohm resistor. The schematic specifies that all ICs follow a standard pin configuration (Pin 7 for ground and Pin 14 for +5V power). It also notes the power and ground rails (C2 for GND and A2 for +5V) and cross-references the associated parts list, A-PL-M900-0-0.