RP05/RP06 Disk Drive Installation Manual

This document is the RP05/RP06 Disk Drive Installation Manual published by Digital Equipment Corporation (DEC) in 1976/1977.

The manual serves as a comprehensive guide for installing and configuring the high-performance, direct-access RP05 and RP06 disk drives, which combine a Memorex-manufactured drive unit with a DEC-manufactured Device Control Logic (DCL) unit.

Key areas covered include:

• General Information: Detailed specifications of the RP05/RP06 drives, including mechanical, electrical, performance features, and disk pack information.
• Site Preparation: Guidelines for space requirements, cabling, power connections, floor loading, and general installation constraints.
• Environmental Considerations: Recommendations for temperature, humidity, heat dissipation, acoustics, radiated emissions, air circulation, and cleanliness to ensure optimal operation.
• Installation Procedures: Step-by-step instructions for unpacking, physically installing the drives, conducting initial checks and adjustments (including power supply voltage and head cleaning).
• Subsystem Integration: Specific procedures for installing the RP05/RP06 drives into various DEC disk subsystems, such as RJPO5/RJP06, RHP05/RHP06, RTP05/RTP06, and RWP05/RWP06, detailing electrical connections and jumper configurations for each.
• Field Acceptance and Diagnostics: Information on error definitions, rates, and detailed diagnostic tests to verify the proper functionality and performance of the installed drives within their respective subsystems.
• Options: Guidance on configuring the drives for dual-port operation and upgrading an RP05 to an RP06 model.

In essence, it's a complete technical reference for technicians and system administrators to successfully deploy, verify, and maintain the RP05/RP06 disk drives in a DEC computer environment.