M926

This document is a schematic diagram from Digital Equipment Corporation, copyrighted 1969, designated for test and maintenance purposes and noted as proprietary.

It illustrates a Flexprint Cable Connector, identified by Part Number M926-0-1, Revision A. The diagram shows two distinct sections labeled "FLEXPRINT CABLE NO.1" and "FLEXPRINT CABLE NO.2," featuring a series of labeled connection points (e.g., AI through V2). Within the schematic, twelve resistors (R1 through R12) are depicted connecting various points. A note specifies that, unless otherwise indicated, all resistors are 100 ohms, 1/4 watt, with a 10% tolerance. The document also includes an empty section for a "Transistor & Diode Conversion Chart" and administrative details, including creation dates from late 1969.