G795

This document is a schematic diagram for a Digital Equipment Corporation Cable Terminator G795, identified as model G795-0-1, copyrighted in 1967 (with revision A).

It is intended for test and maintenance purposes and depicts proprietary circuits. The circuit primarily features an array of diodes (D1-D22), capacitors (C1-C4), and a resistor (R1).

Key component specifications:

• Diodes D1-D4 are type D662 (EIA equivalent IN645).
• Remaining diodes (D5-D22) are type D664 (EIA equivalent IN3606), unless otherwise indicated.
• Capacitors (C1-C4) are 0.01 MFD, 50V.
• Resistor R1 is 120 Ohms, 2 Watts, 10%.
• The circuit includes a -3V "STRATE" input and numerous labeled connection points, with a section clearly marked "FLEX PRINT", indicating an interface designed for a flexible circuit or cable.