Triple Flip-Flop R203

This document is a technical schematic for the "Triple Flip-Flop R203," designed by the Digital Equipment Corporation. The circuit diagram details the configuration of three flip-flop stages using six transistors (Q1 through Q6), numerous diodes (D1 through D52), and various resistors and capacitors. It specifies that all resistors are 1/4 watt with 5% tolerance, capacitors are measured in MMFD (picofarads), and the transistors used are of the DEC 3639 type. The drawing includes power supply rails for +10V, ground, and -15V.