MicroVAX 3500 VAXserver 3500 Installation

This document is an installation manual for the Digital Equipment Corporation (DEC) MicroVAX 3500 and VAXserver 3500 computer systems. Published in 1987 and revised in 1988, its primary purpose is to guide users through the physical setup and initial configuration of these systems.

The manual details a step-by-step installation process, including:

1. Site Preparation: Verifying the site meets physical, environmental, and electrical requirements.
2. Shipment Check: Unpacking and confirming all ordered components are present.
3. System Placement: Instructions for moving and positioning the system unit.
4. Console Terminal Installation: Setting up and connecting a VT200- or VT300-series console terminal, including baud rate and communication settings.
5. Control Settings: Adjusting switches and indicators on the system chassis, such as disk write-protect, power-up mode, and console baud rate.
6. Device Connection: Instructions for connecting various peripherals like additional terminals, serial and parallel printers, synchronous and asynchronous modems (including internal DFA01 modems to telephone lines), and Ethernet network connections.
7. Power Cable Connection: Attaching the system power cord.
8. Initial Power-On & Language Selection: Powering on the system, selecting the console language, and observing power-on self-tests.
9. Front Panel Attachment: Securing the system's front panel.
10. After Installation: Directing users to further documentation for system operation, software installation, and running diagnostics.

The document also includes important warnings regarding power requirements, mentions the difference in mass storage variations (RD54 and RA70), and notes that VAXserver 3500 systems are designed for applications that do not require timesharing. It advises users to consult their warranty as professional installation by a DIGITAL service representative might be required.